dmesg - all_test
microcode: CPU0 microcode updated early to revision 0xc2, date = 2017-11-16
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-109-generic (buildd@lgw01-amd64-038) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5) ) #132-Ubuntu SMP Tue Jan 9 19:52:39 UTC 2018 (Ubuntu 4.4.0-109.132-generic 4.4.98)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b188cfff] usable
BIOS-e820: [mem 0x00000000b188d000-0x00000000b188dfff] ACPI NVS
BIOS-e820: [mem 0x00000000b188e000-0x00000000b18b7fff] reserved
BIOS-e820: [mem 0x00000000b18b8000-0x00000000b55d1fff] usable
BIOS-e820: [mem 0x00000000b55d2000-0x00000000b60aafff] reserved
BIOS-e820: [mem 0x00000000b60ab000-0x00000000b629cfff] usable
BIOS-e820: [mem 0x00000000b629d000-0x00000000b6a2afff] ACPI NVS
BIOS-e820: [mem 0x00000000b6a2b000-0x00000000b72fdfff] reserved
BIOS-e820: [mem 0x00000000b72fe000-0x00000000b72fefff] usable
BIOS-e820: [mem 0x00000000b7300000-0x00000000b73fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: Acer Veriton Series/H110M4-C2H, BIOS P21-A0 01/26/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00B8000000 mask 7FF8000000 uncachable
2 base 00B7800000 mask 7FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xb72ff max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcbc0-0x000fcbcf] mapped at [ffff8800000fcbc0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x02215000, 0x02215fff] PGTABLE
BRK [0x02216000, 0x02216fff] PGTABLE
BRK [0x02217000, 0x02217fff] PGTABLE
BRK [0x02218000, 0x02218fff] PGTABLE
BRK [0x02219000, 0x02219fff] PGTABLE
BRK [0x0221a000, 0x0221afff] PGTABLE
RAMDISK: [mem 0x336fc000-0x35b75fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ACRSYS)
ACPI: XSDT 0x00000000B69A30A0 0000BC (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
ACPI: FACP 0x00000000B69C7DC0 00010C (v05 ACRSYS ACRPRDCT 01072009 AMI 00010013)
ACPI: DSDT 0x00000000B69A31F0 024BC9 (v02 ACRSYS ACRPRDCT 01072009 INTL 20120913)
ACPI: FACS 0x00000000B6A12F80 000040
ACPI: APIC 0x00000000B69C7ED0 000084 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013)
ACPI: FPDT 0x00000000B69C7F58 000044 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
ACPI: FIDT 0x00000000B69C7FA0 00009C (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
ACPI: MCFG 0x00000000B69C8040 00003C (v01 ACRSYS ACRPRDCT 01072009 MSFT 00000097)
ACPI: HPET 0x00000000B69C8080 000038 (v01 ACRSYS ACRPRDCT 01072009 AMI. 0005000B)
ACPI: LPIT 0x00000000B69C80B8 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000B69C8150 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0x00000000B69C8398 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
ACPI: DBGP 0x00000000B69CAF48 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x00000000B69CAF80 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000B69CAFD8 000628 (v02 INTEL xh_rvp08 00000000 INTL 20120913)
ACPI: SLIC 0x00000000B69CB600 000176 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
ACPI: SSDT 0x00000000B69CB778 00546C (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x00000000B69D0BE8 000042 (v01 00000000 00000000)
ACPI: SSDT 0x00000000B69D0C30 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: DMAR 0x00000000B69D1AA8 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: TPM2 0x00000000B69D1B50 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
ACPI: ASF! 0x00000000B69D1B88 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
NODE_DATA(0) allocated [mem 0x23eff7000-0x23effbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x00000000b188cfff]
node 0: [mem 0x00000000b18b8000-0x00000000b55d1fff]
node 0: [mem 0x00000000b60ab000-0x00000000b629cfff]
node 0: [mem 0x00000000b72fe000-0x00000000b72fefff]
node 0: [mem 0x0000000100000000-0x000000023effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
On node 0 totalpages: 2049845
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 11551 pages used for memmap
DMA32 zone: 739226 pages, LIFO batch:31
Normal zone: 20416 pages used for memmap
Normal zone: 1306624 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xb8000000-0xbfffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xb188d000-0xb188dfff]
PM: Registered nosave memory: [mem 0xb188e000-0xb18b7fff]
PM: Registered nosave memory: [mem 0xb55d2000-0xb60aafff]
PM: Registered nosave memory: [mem 0xb629d000-0xb6a2afff]
PM: Registered nosave memory: [mem 0xb6a2b000-0xb72fdfff]
PM: Registered nosave memory: [mem 0xb72ff000-0xb72fffff]
PM: Registered nosave memory: [mem 0xb7300000-0xb73fffff]
PM: Registered nosave memory: [mem 0xb7400000-0xb7ffffff]
PM: Registered nosave memory: [mem 0xb8000000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 34 pages/cpu @ffff88023ec00000 s99544 r8192 d31528 u524288
pcpu-alloc: s99544 r8192 d31528 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2017793
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7947496K/8199380K available (8485K kernel code, 1308K rwdata, 3988K rodata, 1508K init, 1316K bss, 251884K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:1024 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 2712.057 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.11 BogoMIPS (lpj=10848228)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K
ftrace: allocating 32171 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 1
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x000000b5e4d000 end: 0x000000b5e6cfff
DMAR: RMRR base: 0x000000b7800000 end: 0x000000bfffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0xc2, date = 2017-11-16
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
microcode: CPU2 microcode updated early to revision 0xc2, date = 2017-11-16
#3
microcode: CPU3 microcode updated early to revision 0xc2, date = 2017-11-16
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (21696.45 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xb188d000-0xb188dfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xb629d000-0xb6a2afff] (7921664 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 11:34:52, date: 01/16/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 26 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880234D52000 0005FD (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880234D81C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880234D52800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880234D7FE00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xdf12f000-0xdf12ffff 64bit]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf110000-0xdf11ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf12e000-0xdf12efff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf12d000-0xdf12dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf128000-0xdf129fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf12c000-0xdf12c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf12b000-0xdf12b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf124000-0xdf127fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf120000-0xdf123fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf100000-0xdf10ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf12a000-0xdf12a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xdf004000-0xdf004fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xdf000000-0xdf003fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
e820: reserve RAM buffer [mem 0xb188d000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xb55d2000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb629d000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb72ff000-0xb7ffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a1f] has been reserved
system 00:00: [io 0x0a20-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] could not be reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xff00-0xfffe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdf000000-0xdf0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 37352K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xad88d000-0xb188d000] (64MB) mapped at [ffff8800ad88d000-ffff8800b188cfff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1516102492.748:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-109-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-109-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x506e3, pf=0x2, revision=0xc2
microcode: CPU1 sig=0x506e3, pf=0x2, revision=0xc2
microcode: CPU2 sig=0x506e3, pf=0x2, revision=0xc2
microcode: CPU3 sig=0x506e3, pf=0x2, revision=0xc2
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 96e61bd247bb6c4e82ca419795a98fcb171b0e99'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 2:366:580
pci_bus 0000:01: hash matches
rtc_cmos 00:04: setting system clock to 2018-01-16 11:34:53 UTC (1516102493)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1508K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1744K
Freeing unused kernel memory: 108K
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
wmi: Mapper loaded
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[drm] Initialized drm 1.1.0 20060810
r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0xffffc90000e98000, f4:4d:30:af:89:03, XID 14100800 IRQ 316
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b100 irq 315
ata2: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b180 irq 315
ata3: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b200 irq 315
ata4: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b280 irq 315
[drm] Memory usable by graphics device = 4096M
checking generic (c0000000 410000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
r8169 0000:01:00.0 enp1s0: renamed from eth0
[drm] Finished loading i915/skl_dmc_ver1.bin (v1.26)
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] failed to retrieve link info, disabling eDP
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0f: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915_bpo 1.6.0 20160425 for 0000:00:02.0 on minor 0
usb 1-2: new low-speed USB device number 2 using xhci_hcd
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915_bpo 0000:00:02.0: fb0: inteldrmfb frame buffer device
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
ata2: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
scsi 3:0:0:0: Direct-Access ATA ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sda] 4096-byte physical blocks
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-2: New USB device found, idVendor=1a2c, idProduct=0042
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: Usb Mouse
usb 1-2: Manufacturer: SEMICCHIP
usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: SEMICCHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1A2C:0042.0001/input/input7
hid-generic 0003:1A2C:0042.0001: input,hidraw0: USB HID v1.10 Mouse [SEMICCHIP Usb Mouse] on usb-0000:00:14.0-2/input0
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 3:0:0:0: [sda] Attached SCSI disk
usb 1-4: new low-speed USB device number 3 using xhci_hcd
usb 1-4: New USB device found, idVendor=046d, idProduct=c31c
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: USB Keyboard
usb 1-4: Manufacturer: Logitech
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-4: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C31C.0002/input/input8
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-4/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C31C.0003/input/input9
hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-4/input1
tsc: Refined TSC clocksource calibration: 2712.012 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x271791bffc3, max_idle_ns: 440795320414 ns
usb 1-6: new full-speed USB device number 4 using xhci_hcd
usb 1-6: New USB device found, idVendor=0fe6, idProduct=9700
usb 1-6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-6: Product: USB 2.0 10/100M Ethernet Adaptor
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
[drm] RC6 on
random: nonblocking pool is initialized
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice System Slice.
systemd[1]: Started Braille Device Support.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting Set console keymap...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Uncomplicated firewall.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
usb 1-2: USB disconnect, device number 2
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
usb 1-2: new low-speed USB device number 5 using xhci_hcd
usb 1-2: New USB device found, idVendor=1a2c, idProduct=0042
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: Usb Mouse
usb 1-2: Manufacturer: SEMICCHIP
usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SEMICCHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1A2C:0042.0004/input/input10
hid-generic 0003:1A2C:0042.0004: input,hidraw0: USB HID v1.10 Mouse [SEMICCHIP Usb Mouse] on usb-0000:00:14.0-2/input0
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda9): re-mounted. Opts: (null)
systemd-journald[239]: Received request to flush runtime journal from PID 1
tpm_crb MSFT0101:00: can't request region for resource [mem 0xfed40080-0xfed40fff]
tpm_crb: probe of MSFT0101:00 failed with error -16
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol BCM registered
Bluetooth: HCI UART protocol QCA registered
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915_bpo])
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
intel_rapl: RAPL package 0 domain package locked by BIOS
intel_rapl: RAPL package 0 domain dram locked by BIOS
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
dm9601 1-6:1.0 eth0: register 'dm9601' at usb-0000:00:14.0-6, Davicom DM96xx USB 10/100 Ethernet, 00:e0:4c:53:44:58
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver sr9700
dm9601 1-6:1.0 enx00e04c534458: renamed from eth0
Adding 15998972k swap on /dev/sda6. Priority:-1 extents:1 across:15998972k FS
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
usb 1-2: USB disconnect, device number 5
usb 1-2: new low-speed USB device number 6 using xhci_hcd
usb 1-2: New USB device found, idVendor=1a2c, idProduct=0042
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: Usb Mouse
usb 1-2: Manufacturer: SEMICCHIP
usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SEMICCHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1A2C:0042.0005/input/input16
hid-generic 0003:1A2C:0042.0005: input,hidraw0: USB HID v1.10 Mouse [SEMICCHIP Usb Mouse] on usb-0000:00:14.0-2/input0
audit: type=1400 audit(1516102505.085:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=751 comm="apparmor_parser"
audit: type=1400 audit(1516102505.085:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=747 comm="apparmor_parser"
audit: type=1400 audit(1516102505.085:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=747 comm="apparmor_parser"
audit: type=1400 audit(1516102505.085:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=748 comm="apparmor_parser"
audit: type=1400 audit(1516102505.085:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=748 comm="apparmor_parser"
audit: type=1400 audit(1516102505.085:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=748 comm="apparmor_parser"
audit: type=1400 audit(1516102505.085:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=748 comm="apparmor_parser"
audit: type=1400 audit(1516102505.133:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=753 comm="apparmor_parser"
audit: type=1400 audit(1516102505.133:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=753 comm="apparmor_parser"
audit: type=1400 audit(1516102505.133:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=753 comm="apparmor_parser"
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6: ADDRCONF(NETDEV_UP): enx00e04c534458: link is not ready
dm9601 1-6:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF
dm9601 1-6:1.0 enx00e04c534458: kevent 4 may have been dropped
dm9601 1-6:1.0 enx00e04c534458: kevent 4 may have been dropped
dm9601 1-6:1.0 enx00e04c534458: kevent 4 may have been dropped
dm9601 1-6:1.0 enx00e04c534458: kevent 4 may have been dropped
dm9601 1-6:1.0 enx00e04c534458: kevent 4 may have been dropped
dm9601 1-6:1.0 enx00e04c534458: kevent 4 may have been dropped
dm9601 1-6:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF
dm9601 1-6:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF
usb 1-2: USB disconnect, device number 6
usb 1-2: new low-speed USB device number 7 using xhci_hcd
usb 1-2: New USB device found, idVendor=1a2c, idProduct=0042
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: Usb Mouse
usb 1-2: Manufacturer: SEMICCHIP
usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SEMICCHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1A2C:0042.0006/input/input17
hid-generic 0003:1A2C:0042.0006: input,hidraw0: USB HID v1.10 Mouse [SEMICCHIP Usb Mouse] on usb-0000:00:14.0-2/input0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usb 1-6: USB disconnect, device number 4
dm9601 1-6:1.0 enx00e04c534458: unregister 'dm9601' usb-0000:00:14.0-6, Davicom DM96xx USB 10/100 Ethernet
usb 1-5: new full-speed USB device number 8 using xhci_hcd
usb 1-5: New USB device found, idVendor=0fe6, idProduct=9700
usb 1-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-5: Product: USB 2.0 10/100M Ethernet Adaptor
dm9601 1-5:1.0 eth0: register 'dm9601' at usb-0000:00:14.0-5, Davicom DM96xx USB 10/100 Ethernet, 00:e0:4c:53:44:58
dm9601 1-5:1.0 enx00e04c534458: renamed from eth0
IPv6: ADDRCONF(NETDEV_UP): enx00e04c534458: link is not ready
dm9601 1-5:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF
dm9601 1-5:1.0 enx00e04c534458: kevent 4 may have been dropped
dm9601 1-5:1.0 enx00e04c534458: kevent 4 may have been dropped
dm9601 1-5:1.0 enx00e04c534458: kevent 4 may have been dropped
dm9601 1-5:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF
dm9601 1-5:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF
usb 1-5: USB disconnect, device number 8
dm9601 1-5:1.0 enx00e04c534458: unregister 'dm9601' usb-0000:00:14.0-5, Davicom DM96xx USB 10/100 Ethernet
usb 1-5: new full-speed USB device number 9 using xhci_hcd
usb 1-5: New USB device found, idVendor=0fe6, idProduct=9700
usb 1-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-5: Product: USB 2.0 10/100M Ethernet Adaptor
dm9601 1-5:1.0 eth0: register 'dm9601' at usb-0000:00:14.0-5, Davicom DM96xx USB 10/100 Ethernet, 00:e0:4c:53:44:58
dm9601 1-5:1.0 enx00e04c534458: renamed from eth0
IPv6: ADDRCONF(NETDEV_UP): enx00e04c534458: link is not ready
dm9601 1-5:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF
dm9601 1-5:1.0 enx00e04c534458: kevent 4 may have been dropped
dm9601 1-5:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF
dm9601 1-5:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF
IPv6: ADDRCONF(NETDEV_UP): enx00e04c534458: link is not ready
dm9601 1-5:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF
do_trap: 57 callbacks suppressed
traps: notify-osd[1887] trap int3 ip:7f3fc0817a5b sp:7ffcf57d90c0 error:0
IPv6: ADDRCONF(NETDEV_UP): enx00e04c534458: link is not ready
dm9601 1-5:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF
IPv6: ADDRCONF(NETDEV_UP): enx00e04c534458: link is not ready
dm9601 1-5:1.0 enx00e04c534458: link up, 100Mbps, full-duplex, lpa 0xFFFF
r8169 0000:01:00.0 enp1s0: link down
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
usb 1-5: USB disconnect, device number 9
dm9601 1-5:1.0 enx00e04c534458: unregister 'dm9601' usb-0000:00:14.0-5, Davicom DM96xx USB 10/100 Ethernet
r8169 0000:01:00.0 enp1s0: link down
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
perf interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Netfilter messages via NETLINK v0.30.
device enp1s0 entered promiscuous mode
device enp1s0 left promiscuous mode
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
device enp1s0 entered promiscuous mode
device enp1s0 left promiscuous mode
perf interrupt took too long (5008 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1 gen() 6148 MB/s
raid6: sse2x1 xor() 6046 MB/s
raid6: sse2x2 gen() 11811 MB/s
raid6: sse2x2 xor() 8023 MB/s
raid6: sse2x4 gen() 13585 MB/s
raid6: sse2x4 xor() 9027 MB/s
raid6: avx2x1 gen() 23484 MB/s
raid6: avx2x2 gen() 26804 MB/s
raid6: avx2x4 gen() 29677 MB/s
raid6: using algorithm avx2x4 gen() 29677 MB/s
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 27457.000 MB/sec
Btrfs loaded