dmesg - aby-ffmpeg
Linux version 4.15.0-rc7-ge1915c8195b3 (aby@linux-pc) (gcc version 7.2.1 20171128 (GCC)) #1 SMP PREEMPT Fri Jan 12 15:21:59 +05 2018
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
BIOS-e820: [mem 0x0000000004000000-0x000000000400ffff] ACPI NVS
BIOS-e820: [mem 0x0000000004010000-0x0000000009cfffff] usable
BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x00000000dbdf4fff] usable
BIOS-e820: [mem 0x00000000dbdf5000-0x00000000dbf6bfff] reserved
BIOS-e820: [mem 0x00000000dbf6c000-0x00000000dc063fff] usable
BIOS-e820: [mem 0x00000000dc064000-0x00000000dc445fff] ACPI NVS
BIOS-e820: [mem 0x00000000dc446000-0x00000000dcf3cfff] reserved
BIOS-e820: [mem 0x00000000dcf3d000-0x00000000dcfc9fff] type 20
BIOS-e820: [mem 0x00000000dcfca000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0xdc064000 ACPI=0xdc064000 SMBIOS=0xdcea9000 SMBIOS 3.0=0xdcea8000 ESRT=0xda803b98 MEMATTR=0xd7663018
random: fast init done
SMBIOS 3.0.0 present.
DMI: Gigabyte Technology Co., Ltd. AB350-Gaming 3/AB350-Gaming 3-CF, BIOS F10 12/01/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000da803b98 to 0x00000000da803bd0.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 96000 size 24576
Using GB pages for direct mapping
BRK [0x8760a000, 0x8760afff] PGTABLE
BRK [0x8760b000, 0x8760bfff] PGTABLE
BRK [0x8760c000, 0x8760cfff] PGTABLE
BRK [0x8760d000, 0x8760dfff] PGTABLE
BRK [0x8760e000, 0x8760efff] PGTABLE
BRK [0x8760f000, 0x8760ffff] PGTABLE
BRK [0x87610000, 0x87610fff] PGTABLE
BRK [0x87611000, 0x87611fff] PGTABLE
BRK [0x87612000, 0x87612fff] PGTABLE
BRK [0x87613000, 0x87613fff] PGTABLE
BRK [0x87614000, 0x87614fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x36f7d000-0x377b5fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DC064000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DC064090 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DC06A488 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658)
ACPI: DSDT 0x00000000DC0641D0 0062B5 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DC42EE00 000040
ACPI: APIC 0x00000000DC06A5A0 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DC06A680 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DC06A6C8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DC06A768 008C4C (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: CRAT 0x00000000DC0733B8 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DC074308 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DC074338 002AC4 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DC076E00 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: SSDT 0x00000000DC076E40 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DC076E68 000042 (v01 00000000 00000000)
ACPI: BGRT 0x00000000DC076EB0 000038 (v01 ALASKA ALASKA 01072009 AMI 00010013)
ACPI: IVRS 0x00000000DC076EE8 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DC076FB8 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: SSDT 0x00000000DC0770B0 00195E (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000DC078A10 002314 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
Setting APIC routing to physical flat.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
NODE_DATA(0) allocated [mem 0x41f37b000-0x41f37ffff]
tsc: Fast TSC calibration failed
tsc: Using PIT calibration value
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000003ffffff]
node 0: [mem 0x0000000004010000-0x0000000009cfffff]
node 0: [mem 0x000000000a000000-0x00000000dbdf4fff]
node 0: [mem 0x00000000dbf6c000-0x00000000dc063fff]
node 0: [mem 0x00000000dcfca000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000041f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
On node 0 totalpages: 4181810
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 14129 pages used for memmap
DMA32 zone: 904211 pages, LIFO batch:31
Normal zone: 51150 pages used for memmap
Normal zone: 3273600 pages, LIFO batch:31
Reserved but unavailable: 97 pages
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x04000000-0x0400ffff]
PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
PM: Registered nosave memory: [mem 0xdbdf5000-0xdbf6bfff]
PM: Registered nosave memory: [mem 0xdc064000-0xdc445fff]
PM: Registered nosave memory: [mem 0xdc446000-0xdcf3cfff]
PM: Registered nosave memory: [mem 0xdcf3d000-0xdcfc9fff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 42 pages/cpu @ (ptrval) s133848 r8192 d29992 u262144
pcpu-alloc: s133848 r8192 d29992 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 4116440
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16310832K/16727240K available (10252K kernel code, 1137K rwdata, 2116K rodata, 1368K init, 880K bss, 416408K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 28789 entries in 113 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=16.
RCU priority boosting: priority 1 delay 500 ms.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 8448, nr_irqs: 1096, preallocated irqs: 16
Offload RCU callbacks from CPUs: 0-15.
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 7 ACPI AML tables successfully acquired and loaded
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration failed
tsc: PIT calibration matches PMTIMER. 1 loops
tsc: Detected 3593.236 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.47 BogoMIPS (lpj=3593236)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Freeing SMP alternatives memory: 24K
smpboot: CPU0: AMD Ryzen 5 1600X Six-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (114983.55 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x04000000-0x0400ffff] (65536 bytes)
PM: Registering ACPI NVS region [mem 0xdc064000-0xdc445fff] (4071424 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 5:12:54, date: 01/16/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:01:00.0: [1022:43bb] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0xfe7a0000-0xfe7a7fff 64bit]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.1: [1022:43b7] type 00 class 0x010601
pci 0000:01:00.1: reg 0x24: [mem 0xfe780000-0xfe79ffff]
pci 0000:01:00.1: reg 0x30: [mem 0xfe700000-0xfe77ffff pref]
pci 0000:01:00.1: PME# supported from D3hot D3cold
pci 0000:01:00.2: [1022:43b2] type 01 class 0x060400
pci 0000:01:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 01-05]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xfe600000-0xfe7fffff]
pci 0000:00:01.3: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:01.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:01.0: PME# supported from D3hot D3cold
pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:04.0: PME# supported from D3hot D3cold
pci 0000:01:00.2: PCI bridge to [bus 02-05]
pci 0000:01:00.2: bridge window [io 0xf000-0xffff]
pci 0000:01:00.2: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:01:00.2: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xf000-0xf0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xfe600000-0xfe600fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xf0300000-0xf0303fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0xf000-0xffff]
pci 0000:02:00.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:02:00.0: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:04.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1002:67df] type 00 class 0x030000
pci 0000:06:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:06:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:06:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:06:00.0: reg 0x24: [mem 0xfe900000-0xfe93ffff]
pci 0000:06:00.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref]
pci 0000:06:00.0: BAR 0: assigned to efifb
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:06:00.1: [1002:aaf0] type 00 class 0x040300
pci 0000:06:00.1: reg 0x10: [mem 0xfe960000-0xfe963fff 64bit]
pci 0000:06:00.1: supports D1 D2
pci 0000:00:03.1: PCI bridge to [bus 06]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:07:00.0: [1022:145a] type 00 class 0x130000
pci 0000:07:00.0: enabling Extended Tags
pci 0000:07:00.2: [1022:1456] type 00 class 0x108000
pci 0000:07:00.2: reg 0x18: [mem 0xfe400000-0xfe4fffff]
pci 0000:07:00.2: reg 0x24: [mem 0xfe500000-0xfe501fff]
pci 0000:07:00.2: enabling Extended Tags
pci 0000:07:00.3: [1022:145c] type 00 class 0x0c0330
pci 0000:07:00.3: reg 0x10: [mem 0xfe300000-0xfe3fffff 64bit]
pci 0000:07:00.3: enabling Extended Tags
pci 0000:07:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: PCI bridge to [bus 07]
pci 0000:00:07.1: bridge window [mem 0xfe300000-0xfe5fffff]
pci 0000:08:00.0: [1022:1455] type 00 class 0x130000
pci 0000:08:00.0: enabling Extended Tags
pci 0000:08:00.2: [1022:7901] type 00 class 0x010601
pci 0000:08:00.2: reg 0x24: [mem 0xfe808000-0xfe808fff]
pci 0000:08:00.2: enabling Extended Tags
pci 0000:08:00.2: PME# supported from D3hot D3cold
pci 0000:08:00.3: [1022:1457] type 00 class 0x040300
pci 0000:08:00.3: reg 0x10: [mem 0xfe800000-0xfe807fff]
pci 0000:08:00.3: enabling Extended Tags
pci 0000:08:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 08]
pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
pci 0000:06:00.0: vgaarb: setting as boot VGA device
pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:06:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
e820: reserve RAM buffer [mem 0xdbdf5000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdc064000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource refined-jiffies
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0a00-0x0a2f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: [io 0x0a40-0x0a4f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
clocksource: Switched to clocksource acpi_pm
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0xf000-0xffff]
pci 0000:02:00.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:02:00.0: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:04.0: PCI bridge to [bus 05]
pci 0000:01:00.2: PCI bridge to [bus 02-05]
pci 0000:01:00.2: bridge window [io 0xf000-0xffff]
pci 0000:01:00.2: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:01:00.2: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:00:01.3: PCI bridge to [bus 01-05]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xfe600000-0xfe7fffff]
pci 0000:00:01.3: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 06]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 07]
pci 0000:00:07.1: bridge window [mem 0xfe300000-0xfe5fffff]
pci 0000:00:08.1: PCI bridge to [bus 08]
pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff]
pci_bus 0000:01: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:02: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:03: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
pci_bus 0000:06: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:06: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xfe300000-0xfe5fffff]
pci_bus 0000:08: resource 1 [mem 0xfe800000-0xfe8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:06:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8420K
AMD-Vi: IOMMU performance counters supported
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.3 to group 1
iommu: Adding device 0000:00:02.0 to group 2
iommu: Adding device 0000:00:03.0 to group 3
iommu: Adding device 0000:00:03.1 to group 4
iommu: Adding device 0000:00:04.0 to group 5
iommu: Adding device 0000:00:07.0 to group 6
iommu: Adding device 0000:00:07.1 to group 7
iommu: Adding device 0000:00:08.0 to group 8
iommu: Adding device 0000:00:08.1 to group 9
iommu: Adding device 0000:00:14.0 to group 10
iommu: Adding device 0000:00:14.3 to group 10
iommu: Adding device 0000:00:18.0 to group 11
iommu: Adding device 0000:00:18.1 to group 11
iommu: Adding device 0000:00:18.2 to group 11
iommu: Adding device 0000:00:18.3 to group 11
iommu: Adding device 0000:00:18.4 to group 11
iommu: Adding device 0000:00:18.5 to group 11
iommu: Adding device 0000:00:18.6 to group 11
iommu: Adding device 0000:00:18.7 to group 11
iommu: Adding device 0000:01:00.0 to group 12
iommu: Adding device 0000:01:00.1 to group 12
iommu: Adding device 0000:01:00.2 to group 12
iommu: Adding device 0000:02:00.0 to group 12
iommu: Adding device 0000:02:01.0 to group 12
iommu: Adding device 0000:02:04.0 to group 12
iommu: Adding device 0000:03:00.0 to group 12
iommu: Adding device 0000:06:00.0 to group 13
iommu: Using direct mapping for device 0000:06:00.0
iommu: Adding device 0000:06:00.1 to group 13
iommu: Adding device 0000:07:00.0 to group 14
iommu: Adding device 0000:07:00.2 to group 15
iommu: Adding device 0000:07:00.3 to group 16
iommu: Adding device 0000:08:00.0 to group 17
iommu: Adding device 0000:08:00.2 to group 18
iommu: Adding device 0000:08:00.3 to group 19
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0xf77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.3: AER enabled with IRQ 26
pcieport 0000:00:03.1: AER enabled with IRQ 27
pcieport 0000:00:07.1: AER enabled with IRQ 28
pcieport 0000:00:08.1: AER enabled with IRQ 30
pcieport 0000:00:01.3: Signaling PME with IRQ 26
pcieport 0000:00:03.1: Signaling PME with IRQ 27
pcieport 0000:00:07.1: Signaling PME with IRQ 28
pcieport 0000:00:08.1: Signaling PME with IRQ 30
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.103
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08001129
microcode: CPU1: patch_level=0x08001129
microcode: CPU2: patch_level=0x08001129
microcode: CPU3: patch_level=0x08001129
microcode: CPU4: patch_level=0x08001129
microcode: CPU5: patch_level=0x08001129
microcode: CPU6: patch_level=0x08001129
microcode: CPU7: patch_level=0x08001129
microcode: CPU8: patch_level=0x08001129
microcode: CPU9: patch_level=0x08001129
microcode: CPU10: patch_level=0x08001129
microcode: CPU11: patch_level=0x08001129
microcode: CPU12: patch_level=0x08001129
microcode: CPU13: patch_level=0x08001129
microcode: CPU14: patch_level=0x08001129
microcode: CPU15: patch_level=0x08001129
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (341681769, 0)->(448714445, -107032676)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 2:865:213
rtc_cmos 00:02: setting system clock to 2018-01-16 05:12:55 UTC (1516079575)
Freeing unused kernel memory: 1368K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2016K
Freeing unused kernel memory: 1980K
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
libata version 3.00 loaded.
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000418
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb: port power management may be unreliable
ahci 0000:01:00.1: version 3.0
xhci_hcd 0000:07:00.3: xHCI Host Controller
xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 3
ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
xhci_hcd 0000:07:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000418
ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:07:00.3: xHCI Host Controller
xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780100 irq 40
ata2: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780180 irq 40
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780300 irq 40
ata6: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780380 irq 40
ata7: DUMMY
ata8: DUMMY
ahci 0000:08:00.2: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
ahci 0000:08:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs
ahci 0000:08:00.2: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
ata9: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808100 irq 43
ata10: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808180 irq 44
ata11: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808200 irq 45
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
usb 3-3: new low-speed USB device number 2 using xhci_hcd
usb 1-8: new high-speed USB device number 2 using xhci_hcd
ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: ADATA SX930, 5.9SE, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
ata11.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
ata11.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
scsi 0:0:0:0: Direct-Access ATA ADATA SX930 E PQ: 0 ANSI: 5
ata11.00: configured for UDMA/133
hidraw: raw HID events driver (C) Jiri Kosina
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Gaming Keyboard G105 as /devices/pci0000:00/0000:00:07.1/0000:07:00.3/usb3/3-3/3-3:1.0/0003:046D:C248.0001/input/input0
hid-generic 0003:046D:C248.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Gaming Keyboard G105] on usb-0000:07:00.3-3/input0
input: Logitech Gaming Keyboard G105 as /devices/pci0000:00/0000:00:07.1/0000:07:00.3/usb3/3-3/3-3:1.1/0003:046D:C248.0002/input/input1
usb 3-4: new low-speed USB device number 3 using xhci_hcd
hid-generic 0003:046D:C248.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Keyboard G105] on usb-0000:07:00.3-3/input1
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:07.1/0000:07:00.3/usb3/3-4/3-4:1.0/0003:046D:C069.0003/input/input2
hid-generic 0003:046D:C069.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:07:00.3-4/input0
tsc: Refined TSC clocksource calibration: 3593.257 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb716a989, max_idle_ns: 440795226972 ns
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: HGST HUS724040ALA640, MFAOAA70, max UDMA/133
ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA HGST HUS724040AL AA70 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-8: HGST HUS724040ALA640, MFAOAA70, max UDMA/133
ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA HGST HUS724040AL AA70 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 4:0:0:0: [sdc] Attached SCSI disk
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-8: ST1000DM003-9YN162, CC4B, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5
sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 5:0:0:0: [sdd] 4096-byte physical blocks
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 10:0:0:0: Direct-Access ATA ST1000DM003-9YN1 CC4B PQ: 0 ANSI: 5
sd 10:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 10:0:0:0: [sde] 4096-byte physical blocks
sd 10:0:0:0: [sde] Write Protect is off
sd 10:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 10:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
clocksource: Switched to clocksource tsc
random: crng init done
sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI disk
sde: sde1 sde2 sde3 sde4 sde5
sd 10:0:0:0: [sde] Attached SCSI disk
PM: Starting manual resume from disk
PM: Image not found (code -22)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 236 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Created slice System Slice.
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 10:0:0:0: Attached scsi generic sg4 type 0
EXT4-fs (sda3): re-mounted. Opts: discard
it87: Found IT8733E chip at 0xa60, revision 3
systemd-journald[379]: Received request to flush runtime journal from PID 1
acpi_cpufreq: overriding BIOS provided _PSD data
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ccp 0000:07:00.2: enabling device (0000 -> 0002)
r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0x0000000012018b8f, e0:d5:5e:22:7e:61, XID 0c000800 IRQ 62
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x790b, Revision ID: 0x59
sp5100_tco: I/O address 0x0cd6 already in use
ccp 0000:07:00.2: ccp enabled
ccp 0000:07:00.2: enabled
input: PC Speaker as /devices/platform/pcspkr/input/input5
r8169 0000:03:00.0 enp3s0: renamed from eth0
media: Linux media interface: v0.10
mousedev: PS/2 mouse device common for all mice
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Linux video capture interface: v2.00
snd_hda_intel 0000:06:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:06:00.1: Force to non-snoop mode
snd_hda_intel 0000:08:00.3: enabling device (0000 -> 0002)
Adding 8392700k swap on /dev/sda1. Priority:-2 extents:1 across:8392700k SSDscFS
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card0/input6
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card0/input7
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card0/input8
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card0/input9
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/sound/card1/input10
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/sound/card1/input11
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/sound/card1/input12
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/sound/card1/input13
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/sound/card1/input14
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/sound/card1/input15
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:08:00.3/sound/card1/input16
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
Found CRAT image with size=3920
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=16 id_base=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=14
Found cache entry in CRAT table with processor_id=14
Found cache entry in CRAT table with processor_id=14
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1462:0x341A 0xEF).
[drm] register mmio base: 0xFE900000
[drm] register mmio size: 262144
[drm] probing gen 2 caps for device 1022:1453 = 733903/e
[drm] probing mlw for device 1022:1453 = 733903
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
amdgpu 0000:06:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: 113-V34121-F3
[drm] GPU post is not needed
[drm] vm size is 64 GB, block size is 13-bit, fragment size is 9-bit
amdgpu 0000:06:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
amdgpu 0000:06:00.0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 8222350 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400040000).
amdgpu 0000:06:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
amdgpu: [powerplay] amdgpu: powerplay sw initialized
[drm] Chained IB support enabled!
amdgpu 0000:06:00.0: fence driver on ring 0 use gpu addr 0x0000000000400040, cpu addr 0x000000005d63cfaa
amdgpu 0000:06:00.0: fence driver on ring 1 use gpu addr 0x00000000004000c0, cpu addr 0x0000000005c23d1b
amdgpu 0000:06:00.0: fence driver on ring 2 use gpu addr 0x0000000000400140, cpu addr 0x00000000f8f762c2
amdgpu 0000:06:00.0: fence driver on ring 3 use gpu addr 0x00000000004001c0, cpu addr 0x00000000006f15c1
amdgpu 0000:06:00.0: fence driver on ring 4 use gpu addr 0x0000000000400240, cpu addr 0x00000000e897dc26
amdgpu 0000:06:00.0: fence driver on ring 5 use gpu addr 0x00000000004002c0, cpu addr 0x00000000e2aa2afc
amdgpu 0000:06:00.0: fence driver on ring 6 use gpu addr 0x0000000000400340, cpu addr 0x000000006c049cc7
amdgpu 0000:06:00.0: fence driver on ring 7 use gpu addr 0x00000000004003c0, cpu addr 0x00000000bd4a358b
amdgpu 0000:06:00.0: fence driver on ring 8 use gpu addr 0x0000000000400440, cpu addr 0x00000000d03a35ed
amdgpu 0000:06:00.0: fence driver on ring 9 use gpu addr 0x00000000004004e0, cpu addr 0x00000000e0707360
amdgpu 0000:06:00.0: fence driver on ring 10 use gpu addr 0x0000000000400560, cpu addr 0x00000000523e6fb5
amdgpu 0000:06:00.0: fence driver on ring 11 use gpu addr 0x00000000004005e0, cpu addr 0x000000009e0aeb51
[drm] Found UVD firmware Version: 1.79 Family ID: 16
amdgpu 0000:06:00.0: fence driver on ring 12 use gpu addr 0x000000f4001e6420, cpu addr 0x000000002141bd24
amdgpu 0000:06:00.0: fence driver on ring 13 use gpu addr 0x00000000004006e0, cpu addr 0x000000008b12eb5b
amdgpu 0000:06:00.0: fence driver on ring 14 use gpu addr 0x0000000000400760, cpu addr 0x000000007f7152bb
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
amdgpu 0000:06:00.0: fence driver on ring 15 use gpu addr 0x00000000004007e0, cpu addr 0x000000006abb6780
amdgpu 0000:06:00.0: fence driver on ring 16 use gpu addr 0x0000000000400860, cpu addr 0x000000003e8b77e3
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 30000
[drm] DM_PPLIB: 58800
[drm] DM_PPLIB: 97100
[drm] DM_PPLIB: 106100
[drm] DM_PPLIB: 112800
[drm] DM_PPLIB: 119100
[drm] DM_PPLIB: 123300
[drm] DM_PPLIB: 126800
[drm] DM_PPLIB: Warning: using default validation clocks!
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 72000
[drm] DM_PPLIB: memory_max_clock: 80000
[drm] DM_PPLIB: level : 0
[drm] DM_PPLIB: reducing engine clock level from 8 to 2
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 30000
[drm] DM_PPLIB: 100000
[drm] DM_PPLIB: 175000
[drm] DM_PPLIB: Warning: using default validation clocks!
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 72000
[drm] DM_PPLIB: memory_max_clock: 80000
[drm] DM_PPLIB: level : 0
[drm] DM_PPLIB: reducing memory clock level from 3 to 1
[drm] DC: create_links: connectors_num: physical:5, virtual:0
[drm] Display Core initialized!
SGI XFS with ACLs, security attributes, realtime, no debug enabled
XFS (sdd1): mounting with "discard" option, but the device does not support discard
XFS (sdd1): Mounting V5 Filesystem
[drm] SADs count is: -2, don't need to read it
[drm] Philips 235PQ: [Block 0]
[drm] dc_link_detect: manufacturer_id = C41, product_id = 881, serial_number = DA976, manufacture_week = 14, manufacture_year = 22, display_name = Philips 235PQ, speaker_flag = 0, audio_mode_count = 0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] ring test on 0 succeeded in 11 usecs
[drm] ring test on 9 succeeded in 6 usecs
[drm] ring test on 1 succeeded in 7 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 4 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] ring test on 8 succeeded in 2 usecs
[drm] ring test on 10 succeeded in 5 usecs
[drm] ring test on 11 succeeded in 5 usecs
[drm] ring test on 12 succeeded in 1 usecs
[drm] ring test on 13 succeeded in 13 usecs
[drm] ring test on 14 succeeded in 3 usecs
[drm] UVD and UVD ENC initialized successfully.
XFS (sdd1): Ending clean mount
[drm] ring test on 15 succeeded in 5 usecs
[drm] ring test on 16 succeeded in 2 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
[drm] ib test on ring 14 succeeded
[drm] ib test on ring 15 succeeded
[drm] fb mappable at 0xE03F2000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
[drm] {1920x1080, 2200x1125@148500Khz}
r8169 0000:03:00.0 enp3s0: link down
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
ahci 0000:01:00.1: port does not support device sleep
Console: switching to colour frame buffer device 240x67
amdgpu 0000:06:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:06:00.0: kfd not supported on this ASIC
[drm] Initialized amdgpu 3.23.0 20150101 for 0000:06:00.0 on minor 0
usb 1-8: set resolution quirk: cval->res = 384
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device (046d:0825)
uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Extension 6 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Extension 7 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-8/1-8:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
r8169 0000:03:00.0 enp3s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
usb 1-8: reset high-speed USB device number 2 using xhci_hcd
fuse init (API version 7.26)