dmesg - userhan
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-104-generic (buildd@lgw01-amd64-032) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #127~14.04.1-Ubuntu SMP Mon Dec 11 12:44:57 UTC 2017 (Ubuntu 4.4.0-104.127~14.04.1-generic 4.4.98)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
BIOS-e820: [mem 0x00000000000dc000-0x00000000000dffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003f5affff] usable
BIOS-e820: [mem 0x000000003f5b0000-0x000000003f5bffff] ACPI data
BIOS-e820: [mem 0x000000003f5c0000-0x000000003f5c2fff] ACPI NVS
BIOS-e820: [mem 0x000000003f5c3000-0x000000003fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: SAMSUNG ELECTRONICS CO., LTD. N150P/N210P/N220P /N150P/N210P/N220P , BIOS 02KY.M021.20101217.RHU 12/17/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3f5b0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 0C0000000 write-back
1 base 03F600000 mask 0FFE00000 uncachable
2 base 03F800000 mask 0FF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1014MB, range: 2MB, type UC
reg 2, base: 1016MB, range: 8MB, type UC
total RAM covered: 1014M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1014MB, range: 2MB, type UC
reg 2, base: 1016MB, range: 8MB, type UC
found SMP MP-table at [mem 0x000f7d40-0x000f7d4f] mapped at [c00f7d40]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x021fffff]
Base memory trampoline at [c0099000] 99000 size 16384
BRK [0x01d2b000, 0x01d2bfff] PGTABLE
BRK [0x01d2c000, 0x01d2cfff] PGTABLE
RAMDISK: [mem 0x3560e000-0x36afefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7D10 000024 (v02 PTLTD )
ACPI: XSDT 0x000000003F5B8D8D 00006C (v01 SECCSD LH43STAR 06040000 LTP 00000000)
ACPI: FACP 0x000000003F5BFC92 0000F4 (v03 INTEL 06040000 PTL 00000002)
ACPI: DSDT 0x000000003F5B9FF5 005BA9 (v01 INTEL BEARG31A 06040000 MSFT 03000001)
ACPI: FACS 0x000000003F5C2FC0 000040
ACPI: FACS 0x000000003F5C2FC0 000040
ACPI: MCFG 0x000000003F5BFD86 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 0x000000003F5BFDC2 000038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: APIC 0x000000003F5BFDFA 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 0x000000003F5BFE62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SLIC 0x000000003F5BFE8A 000176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
ACPI: SSDT 0x000000003F5B9395 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 0x000000003F5B92EF 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
ACPI: SSDT 0x000000003F5B8DF9 0004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
121MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
Normal [mem 0x0000000001000000-0x0000000037bfdfff]
HighMem [mem 0x0000000037bfe000-0x000000003f5affff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x000000003f5affff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000003f5affff]
On node 0 totalpages: 259404
DMA zone: 40 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3996 pages, LIFO batch:0
Normal zone: 2190 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 31154 pages, LIFO batch:7
Using APIC driver default
Reserving Intel graphics stolen memory at 0x3f800000-0x3fffffff
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
PM: Registered nosave memory: [mem 0x000d0000-0x000dbfff]
PM: Registered nosave memory: [mem 0x000dc000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
e820: [mem 0x40000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 19 pages/cpu @f71b1000 s47308 r0 d30516 u77824
pcpu-alloc: s47308 r0 d30516 u77824 alloc=19*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257174
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00037bfe:0003f5b0)
Initializing Movable for node 0 (00000000:00000000)
Memory: 991260K/1037616K available (7617K kernel code, 777K rwdata, 3188K rodata, 988K init, 800K bss, 46356K reserved, 0K cma-reserved, 124616K highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1b53000 - 0xc1c4a000 ( 988 kB)
.data : 0xc1770af2 - 0xc1b51500 (3970 kB)
.text : 0xc1000000 - 0xc1770af2 (7618 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:2304 nr_irqs:440 16
CPU 0 irqstacks, hard=f6c38000 soft=f6c3a000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 1048576 bytes of page_ext
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1662.377 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.75 BogoMIPS (lpj=6649508)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring handled by SMI
process: using mwait in idle threads
Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
Freeing SMP alternatives memory: 28K
ftrace: allocating 31461 entries in 62 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
APIC calibration not consistent with PM-Timer: 291ms instead of 100ms
APIC delta adjusted to PM-Timer: 1039060 (3034023)
smpboot: CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz (family: 0x6, model: 0x1c, stepping: 0xa)
Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f6e96000 soft=f6e98000
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Initializing CPU#1
CPU0: Thermal monitoring enabled (TM1)
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (6649.50 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x3f5c0000-0x3f5c2fff] (12288 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 13:00:49, date: 01/07/18
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x36 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000F6E9F000 000203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000F6F30000 0006A5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000F6ECB800 0000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000F6EC39C0 000085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20150930/dsfield-211)
ACPI Error: Method parse/execution failed [\_SB.PCI0._OSC] (Node f6c88e88), AE_ALREADY_EXISTS (20150930/psparse-542)
acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-10] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xfdff window]
pci_bus 0000:00: root bus resource [bus 00-3f]
pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0300000-0xf037ffff]
pci 0000:00:02.0: reg 0x14: [io 0x18d0-0x18d7]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0xf0000000-0xf00fffff]
pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xf0380000-0xf03fffff]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf0400000-0xf0403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x1880-0x189f]
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf0604000-0xf06043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x18e8-0x18ef]
pci 0000:00:1f.2: reg 0x14: [io 0x18dc-0x18df]
pci 0000:00:1f.2: reg 0x18: [io 0x18e0-0x18e7]
pci 0000:00:1f.2: reg 0x1c: [io 0x18d8-0x18db]
pci 0000:00:1f.2: reg 0x20: [io 0x18c0-0x18cf]
pci 0000:00:1f.2: reg 0x24: [mem 0xf0604400-0xf06047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x18a0-0x18bf]
pci 0000:05:00.0: [14e4:4727] type 00 class 0x028000
pci 0000:05:00.0: reg 0x10: [mem 0xf0100000-0xf0103fff 64bit]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [io 0x0000-0x0fff]
pci 0000:09:00.0: [11ab:4354] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [mem 0xf0200000-0xf0203fff 64bit]
pci 0000:09:00.0: reg 0x18: [io 0x2000-0x20ff]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 09]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:1c.3: PCI bridge to [bus 0b]
pci 0000:00:1c.3: bridge window [io 0x0000-0x0fff]
pci 0000:00:1e.0: PCI bridge to [bus 11] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x40000000-0xf7ffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: Enabled 7 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI : EC: 0 stale EC events cleared
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3f5b0000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0800-0x080f] has been reserved
system 00:00: [io 0x1000-0x107f] could not be reserved
system 00:00: [io 0x1180-0x11bf] has been reserved
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0xfe00] has been reserved
system 00:00: [io 0x164e-0x174c] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp: PnP ACPI: found 4 devices
PnPBIOS: Disabled by ACPI PNP
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000
pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.3: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
pci 0000:00:1c.1: BAR 14: assigned [mem 0x40200000-0x403fffff]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
pci 0000:00:1c.3: BAR 14: assigned [mem 0x40800000-0x409fffff]
pci 0000:00:1c.3: BAR 15: assigned [mem 0x40a00000-0x40bfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0x40200000-0x403fffff]
pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 09]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:1c.2: bridge window [mem 0x40600000-0x407fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 0b]
pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.3: bridge window [mem 0x40800000-0x409fffff]
pci 0000:00:1c.3: bridge window [mem 0x40a00000-0x40bfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 11]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 10 [mem 0x40000000-0xf7ffffff window]
pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff window]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
pci_bus 0000:05: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:07: resource 1 [mem 0x40200000-0x403fffff]
pci_bus 0000:07: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:09: resource 1 [mem 0xf0200000-0xf02fffff]
pci_bus 0000:09: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:0b: resource 1 [mem 0x40800000-0x409fffff]
pci_bus 0000:0b: resource 2 [mem 0x40a00000-0x40bfffff 64bit pref]
pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:11: resource 10 [mem 0x40000000-0xf7ffffff window]
pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff window]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 21444K
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1515330050.168:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 800x600x32, linelength=3200, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xf8600000, using 1920k, total 1920k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x20220
intel_idle: v0.4.1 model 0x1C
intel_idle: lapic_timer_reliable_states 0x2
tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (22 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf0604000
ACPI: Battery Slot [BAT1] (battery present)
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-104-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.4.0-104-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x105
microcode: CPU1 sig=0x106ca, pf=0x4, revision=0x105
microcode: Microcode Update Driver: v2.01 , Peter Oruba
Using IPI No-Shortcut mode
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 50f50f95198647333cb79640e5cf55c3498c14be'
zswap: loaded using pool lzo/zbud
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 2:832:27
rtc_cmos 00:01: setting system clock to 2018-01-07 13:00:50 UTC (1515330050)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
isapnp: No Plug & Play device found
Freeing unused kernel memory: 988K
Write protecting the kernel text: 7620k
Write protecting the kernel read-only data: 3192k
NX-protecting the kernel data: 6716k
systemd-udevd[106]: starting version 204
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
sky2: driver version 1.30
sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
sky2 0000:09:00.0 eth0: addr e8:11:32:10:d2:9e
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
usb 3-2: new full-speed USB device number 2 using uhci_hcd
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 29
ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 29
ata3: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604600 irq 29
ata4: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604680 irq 29
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: WDC WD2500BEVT-35A23T0, 01.01A01, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-3 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata2: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 3-2: New USB device found, idVendor=0a5c, idProduct=219c
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Broadcom BCM2070 Bluetooth Device
usb 3-2: Manufacturer: Broadcom Corp
usb 3-2: SerialNumber: 000B6B73493F
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17f65240ccd, max_idle_ns: 440795250758 ns
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x040216)
psmouse serio1: elantech: Synaptics capabilities query result 0x09, 0x14, 0x0b.
psmouse serio1: elantech: Elan sample query result 03, 00, 60
usb 5-1: new low-speed USB device number 2 using uhci_hcd
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
usb 5-1: New USB device found, idVendor=046d, idProduct=c062
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB Laser Mouse
usb 5-1: Manufacturer: Logitech
usb 1-8: new high-speed USB device number 4 using ehci-pci
usb 1-8: New USB device found, idVendor=0ac8, idProduct=c33f
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8: Product: WebCam SCB-0340N
usb 1-8: Manufacturer: Namuga.
random: init: uninitialized urandom read (12 bytes read, 105 bits of entropy available)
random: nonblocking pool is initialized
Adding 1951740k swap on /dev/sda5. Priority:-1 extents:1 across:1951740k FS
systemd-udevd[289]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
bcma: bus0: Bus registered
ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000107F (\PMIO) (20150930/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000102F (\_SB_.PCI0.LPC0.PMIO) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011AF (\_SB_.PCI0.LPC0.GPOX) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
audit: type=1400 audit(1515330064.979:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=378 comm="apparmor_parser"
audit: type=1400 audit(1515330064.979:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=378 comm="apparmor_parser"
audit: type=1400 audit(1515330064.979:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=378 comm="apparmor_parser"
[drm] Memory usable by graphics device = 512M
checking generic (d0000000 1e0000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
media: Linux media interface: v0.10
hidraw: raw HID events driver (C) Jiri Kosina
intel_powerclamp: No package C-state available
usbcore: registered new interface driver btusb
intel_powerclamp: No package C-state available
[drm] initialized overlay support
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
acpi device:03: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x37
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Linux video capture interface: v2.00
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
samsung_laptop: detected SABI interface: SwSmi@
uvcvideo: Found UVC 1.00 device WebCam SCB-0340N (0ac8:c33f)
input: WebCam SCB-0340N as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
gpio_ich: GPIO from 446 to 495 on gpio_ich
input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:046D:C062.0001/input/input11
hid-generic 0003:046D:C062.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.3-1/input0
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
b43: probe of bcma0:1 failed with error -524
Broadcom 43xx driver loaded [ Features: PNL ]
init: failsafe main process (569) killed by TERM signal
brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 16
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 499
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit: type=1400 audit(1515330070.847:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=769 comm="apparmor_parser"
audit: type=1400 audit(1515330070.847:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=769 comm="apparmor_parser"
init: cups main process (770) killed by HUP signal
init: cups main process ended, respawning
brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
sky2 0000:09:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
audit: type=1400 audit(1515330072.591:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=867 comm="apparmor_parser"
audit: type=1400 audit(1515330072.595:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=867 comm="apparmor_parser"
audit: type=1400 audit(1515330072.595:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=867 comm="apparmor_parser"
audit: type=1400 audit(1515330072.603:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=866 comm="apparmor_parser"
audit: type=1400 audit(1515330072.603:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=866 comm="apparmor_parser"
audit: type=1400 audit(1515330072.651:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=870 comm="apparmor_parser"
audit: type=1400 audit(1515330072.651:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=870 comm="apparmor_parser"
audit: type=1400 audit(1515330072.651:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=870 comm="apparmor_parser"
sky2 0000:09:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1363) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (1479) terminated with status 1
audit_printk_skb: 45 callbacks suppressed
audit: type=1400 audit(1515330101.252:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2549 comm="apparmor_parser"
audit: type=1400 audit(1515330101.252:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2549 comm="apparmor_parser"
perf interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5017 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
CE: hpet increased min_delta_ns to 20115 nsec
perf interrupt took too long (10002 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
systemd-hostnamed[4129]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!