dmesg - post
Linux version 4.15.0-999-generic (kernel@kathleen) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3)) #201801040200 SMP Thu Jan 4 02:01:30 UTC 2018
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: x87 FPU will use FXSAVE
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000006bfff] usable
BIOS-e820: [mem 0x000000000006c000-0x000000000006cfff] ACPI NVS
BIOS-e820: [mem 0x000000000006d000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000100000-0x000000007d442fff] usable
BIOS-e820: [mem 0x000000007d443000-0x000000007d46dfff] type 20
BIOS-e820: [mem 0x000000007d46e000-0x000000007d491fff] usable
BIOS-e820: [mem 0x000000007d492000-0x000000007d4bcfff] type 20
BIOS-e820: [mem 0x000000007d4bd000-0x000000007d65afff] usable
BIOS-e820: [mem 0x000000007d65b000-0x000000007d70afff] reserved
BIOS-e820: [mem 0x000000007d70b000-0x000000007f5eefff] usable
BIOS-e820: [mem 0x000000007f5ef000-0x000000007f5fffff] reserved
BIOS-e820: [mem 0x000000007f600000-0x000000007f60cfff] type 20
BIOS-e820: [mem 0x000000007f60d000-0x000000007f63efff] reserved
BIOS-e820: [mem 0x000000007f63f000-0x000000007f68efff] type 20
BIOS-e820: [mem 0x000000007f68f000-0x000000007f6defff] reserved
BIOS-e820: [mem 0x000000007f6df000-0x000000007f7defff] ACPI NVS
BIOS-e820: [mem 0x000000007f7df000-0x000000007f7fefff] ACPI data
BIOS-e820: [mem 0x000000007f7ff000-0x000000007f7fffff] usable
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.10 by IBM
efi: ACPI 2.0=0x7f7fe014 SMBIOS=0x7f6be000
random: fast init done
SMBIOS 2.5 present.
DMI: IBM IBM System x -[7947AC1]-/49Y6512, BIOS -[D6E162AUS-1.20]- 05/07/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x480000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0100000000 mask FF00000000 write-back
2 base 0200000000 mask FE00000000 write-back
3 base 0400000000 mask FC00000000 write-back
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 97000 size 24576
BRK [0x18c937000, 0x18c937fff] PGTABLE
BRK [0x18c938000, 0x18c938fff] PGTABLE
BRK [0x18c939000, 0x18c939fff] PGTABLE
BRK [0x18c93a000, 0x18c93afff] PGTABLE
BRK [0x18c93b000, 0x18c93bfff] PGTABLE
BRK [0x18c93c000, 0x18c93cfff] PGTABLE
BRK [0x18c93d000, 0x18c93dfff] PGTABLE
BRK [0x18c93e000, 0x18c93efff] PGTABLE
BRK [0x18c93f000, 0x18c93ffff] PGTABLE
BRK [0x18c940000, 0x18c940fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x31d05000-0x34e79fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007F7FE014 000024 (v02 IBM )
ACPI: XSDT 0x000000007F7FE120 000084 (v01 IBM THURLEY 00000000 01000013)
ACPI: FACP 0x000000007F7FB000 0000F4 (v04 IBM THURLEY 00000000 IBM 01000013)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20170831/tbfadt-603)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20170831/tbfadt-708)
ACPI: DSDT 0x000000007F7F8000 002C3E (v01 IBM THURLEY 00000003 IBM 01000013)
ACPI: FACS 0x000000007F72A000 000040
ACPI: FACS 0x000000007F72A000 000040
ACPI: TCPA 0x000000007F7FD000 000064 (v00 00000000 00000000)
ACPI: APIC 0x000000007F7F7000 0000DE (v02 IBM THURLEY 00000000 IBM 01000013)
ACPI: MCFG 0x000000007F7F6000 00003C (v01 IBM THURLEY 00000001 IBM 01000013)
ACPI: SLIC 0x000000007F7F5000 000176 (v01 IBM THURLEY 00000000 IBM 01000013)
ACPI: HPET 0x000000007F7F4000 000038 (v01 IBM THURLEY 00000001 IBM 01000013)
ACPI: SRAT 0x000000007F7F3000 0001A8 (v02 IBM THURLEY 00000001 IBM 01000013)
ACPI: SLIT 0x000000007F7F2000 000030 (v01 IBM THURLEY 00000000 IBM 01000013)
ACPI: SSDT 0x000000007F7F1000 000113 (v02 IBM CPUSCOPE 00004000 IBM 01000013)
ACPI: SSDT 0x000000007F7F0000 000491 (v02 IBM CPUWYVRN 00004000 IBM 01000013)
ACPI: SSDT 0x000000007F7EC000 003E2C (v02 IBM PSTATEPM 00004000 IBM 01000013)
ACPI: ERST 0x000000007F7EB000 000230 (v01 IBM THURLEY 00000001 IBM 01000013)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 1 -> APIC 0x10 -> Node 1
SRAT: PXM 1 -> APIC 0x12 -> Node 1
SRAT: PXM 1 -> APIC 0x14 -> Node 1
SRAT: PXM 1 -> APIC 0x16 -> Node 1
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 1 -> APIC 0x11 -> Node 1
SRAT: PXM 1 -> APIC 0x13 -> Node 1
SRAT: PXM 1 -> APIC 0x15 -> Node 1
SRAT: PXM 1 -> APIC 0x17 -> Node 1
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x27fffffff]
ACPI: SRAT: Node 1 PXM 1 [mem 0x280000000-0x47fffffff]
NUMA: Initialized distance table, cnt=2
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x27fffffff] -> [mem 0x00000000-0x27fffffff]
NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff]
NODE_DATA(1) allocated [mem 0x47ffc7000-0x47fff1fff]
tsc: Fast TSC calibration using PIT
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000047fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000006bfff]
node 0: [mem 0x000000000006d000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007d442fff]
node 0: [mem 0x000000007d46e000-0x000000007d491fff]
node 0: [mem 0x000000007d4bd000-0x000000007d65afff]
node 0: [mem 0x000000007d70b000-0x000000007f5eefff]
node 0: [mem 0x000000007f7ff000-0x000000007f7fffff]
node 0: [mem 0x0000000100000000-0x000000027fffffff]
node 1: [mem 0x0000000280000000-0x000000047fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
On node 0 totalpages: 2094215
DMA zone: 64 pages used for memmap
DMA zone: 2229 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 8084 pages used for memmap
DMA32 zone: 517354 pages, LIFO batch:31
Normal zone: 24576 pages used for memmap
Normal zone: 1572864 pages, LIFO batch:31
Initmem setup node 1 [mem 0x0000000280000000-0x000000047fffffff]
On node 1 totalpages: 2097152
Normal zone: 32768 pages used for memmap
Normal zone: 2097152 pages, LIFO batch:31
Reserved but unavailable: 98 pages
ACPI: PM-Timer IO Port: 0x588
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0006c000-0x0006cfff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7d443000-0x7d46dfff]
PM: Registered nosave memory: [mem 0x7d492000-0x7d4bcfff]
PM: Registered nosave memory: [mem 0x7d65b000-0x7d70afff]
PM: Registered nosave memory: [mem 0x7f5ef000-0x7f5fffff]
PM: Registered nosave memory: [mem 0x7f600000-0x7f60cfff]
PM: Registered nosave memory: [mem 0x7f60d000-0x7f63efff]
PM: Registered nosave memory: [mem 0x7f63f000-0x7f68efff]
PM: Registered nosave memory: [mem 0x7f68f000-0x7f6defff]
PM: Registered nosave memory: [mem 0x7f6df000-0x7f7defff]
PM: Registered nosave memory: [mem 0x7f7df000-0x7f7fefff]
PM: Registered nosave memory: [mem 0x7f800000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:2
percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 08 09 10 11 [1] 04 05 06 07 12 13 14 15
Built 2 zonelists, mobility grouping on. Total pages: 4123646
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16291540K/16765468K available (12300K kernel code, 2468K rwdata, 4184K rodata, 2380K init, 2416K bss, 473928K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=2
Kernel/User page tables isolation: enabled
ftrace: allocating 38965 entries in 153 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 960, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
ACPI: Core revision 20170831
ACPI: 4 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR-IR: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 2800.158 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.31 BogoMIPS (lpj=11200632)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 36K
smpboot: CPU0: Intel(R) Xeon(R) CPU X5560 @ 2.80GHz (family: 0x6, model: 0x1a, stepping: 0x5)
Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
core: CPU erratum AAJ80 worked around
core: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
#2 #3
.... node #1, CPUs: #4 #5 #6 #7
.... node #0, CPUs: #8 #9 #10 #11
.... node #1, CPUs: #12 #13 #14 #15
smp: Brought up 2 nodes, 16 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 16 processors activated (89603.20 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x0006c000-0x0006cfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x0009f000-0x0009ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7f6df000-0x7f7defff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 21:21:41, date: 01/04/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1515100901.192:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant []
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
acpi PNP0A08:00: host bridge window [mem 0x7f00000000 window] (ignored, not CPU addressable)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfdffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:3406] type 00 class 0x060000
pci 0000:00:00.0: enabling Extended Tags
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:340c] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
pci 0000:00:16.0: [8086:3430] type 00 class 0x088000
pci 0000:00:16.0: reg 0x10: [mem 0x97a00000-0x97a03fff 64bit]
pci 0000:00:16.1: [8086:3431] type 00 class 0x088000
pci 0000:00:16.1: reg 0x10: [mem 0x97a04000-0x97a07fff 64bit]
pci 0000:00:16.2: [8086:3432] type 00 class 0x088000
pci 0000:00:16.2: reg 0x10: [mem 0x97a08000-0x97a0bfff 64bit]
pci 0000:00:16.3: [8086:3433] type 00 class 0x088000
pci 0000:00:16.3: reg 0x10: [mem 0x97a0c000-0x97a0ffff 64bit]
pci 0000:00:16.4: [8086:3429] type 00 class 0x088000
pci 0000:00:16.4: reg 0x10: [mem 0x97a10000-0x97a13fff 64bit]
pci 0000:00:16.5: [8086:342a] type 00 class 0x088000
pci 0000:00:16.5: reg 0x10: [mem 0x97a14000-0x97a17fff 64bit]
pci 0000:00:16.6: [8086:342b] type 00 class 0x088000
pci 0000:00:16.6: reg 0x10: [mem 0x97a18000-0x97a1bfff 64bit]
pci 0000:00:16.7: [8086:342c] type 00 class 0x088000
pci 0000:00:16.7: reg 0x10: [mem 0x97a1c000-0x97a1ffff 64bit]
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x20a0-0x20bf]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x2080-0x209f]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0x97a21000-0x97a213ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x2060-0x207f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x2040-0x205f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x2020-0x203f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0x97a20000-0x97a203ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0x2118-0x211f]
pci 0000:00:1f.2: reg 0x14: [io 0x212c-0x212f]
pci 0000:00:1f.2: reg 0x18: [io 0x2110-0x2117]
pci 0000:00:1f.2: reg 0x1c: [io 0x2128-0x212b]
pci 0000:00:1f.2: reg 0x20: [io 0x20f0-0x20ff]
pci 0000:00:1f.2: reg 0x24: [io 0x20e0-0x20ef]
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x97a22000-0x97a220ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x2000-0x201f]
pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0x2108-0x210f]
pci 0000:00:1f.5: reg 0x14: [io 0x2124-0x2127]
pci 0000:00:1f.5: reg 0x18: [io 0x2100-0x2107]
pci 0000:00:1f.5: reg 0x1c: [io 0x2120-0x2123]
pci 0000:00:1f.5: reg 0x20: [io 0x20d0-0x20df]
pci 0000:00:1f.5: reg 0x24: [io 0x20c0-0x20cf]
pci 0000:0b:00.0: [14e4:1639] type 00 class 0x020000
pci 0000:0b:00.0: reg 0x10: [mem 0x92000000-0x93ffffff 64bit]
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0b:00.1: [14e4:1639] type 00 class 0x020000
pci 0000:0b:00.1: reg 0x10: [mem 0x94000000-0x95ffffff 64bit]
pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 0b-0f]
pci 0000:00:01.0: bridge window [mem 0x92000000-0x95ffffff]
pci 0000:00:02.0: PCI bridge to [bus 10-14]
pci 0000:00:03.0: PCI bridge to [bus 15-19]
pci 0000:00:05.0: PCI bridge to [bus 1a-1e]
pci 0000:00:07.0: PCI bridge to [bus 1f-23]
pci 0000:00:09.0: PCI bridge to [bus 24-28]
pci 0000:01:00.0: [1000:0058] type 00 class 0x010000
pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
pci 0000:01:00.0: reg 0x14: [mem 0x97910000-0x97913fff 64bit]
pci 0000:01:00.0: reg 0x1c: [mem 0x97900000-0x9790ffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xffe00000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:1c.0: PCI bridge to [bus 01-05]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x97900000-0x979fffff]
pci 0000:06:00.0: [101b:0452] type 01 class 0x060400
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 06-0a]
pci 0000:00:1c.4: bridge window [mem 0x97000000-0x978fffff]
pci 0000:00:1c.4: bridge window [mem 0x96000000-0x96ffffff 64bit pref]
pci 0000:07:00.0: [102b:0530] type 00 class 0x030000
pci 0000:07:00.0: reg 0x10: [mem 0x96000000-0x96ffffff pref]
pci 0000:07:00.0: reg 0x14: [mem 0x97800000-0x97803fff]
pci 0000:07:00.0: reg 0x18: [mem 0x97000000-0x977fffff]
pci 0000:07:00.0: BAR 0: assigned to efifb
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [mem 0x97000000-0x978fffff]
pci 0000:06:00.0: bridge window [mem 0x96000000-0x96ffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 29-2d] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x90000000-0xfdffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
pci 0000:07:00.0: vgaarb: setting as boot VGA device
pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:07:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus fe
PCI: root bus fe: using default resources
PCI: Probing PCI hardware (bus fe)
PCI host bridge to bus 0000:fe
pci_bus 0000:fe: root bus resource [io 0x0000-0xffff]
pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
pci_bus 0000:fe: busn_res: can not insert [bus fe-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:fe:00.0: [8086:2c40] type 00 class 0x060000
pci 0000:fe:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:fe:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:fe:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:fe:02.4: [8086:2c14] type 00 class 0x060000
pci 0000:fe:02.5: [8086:2c15] type 00 class 0x060000
pci 0000:fe:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:fe:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:fe:03.2: [8086:2c1a] type 00 class 0x060000
pci 0000:fe:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:fe:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:fe:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:fe:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:fe:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:fe:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:fe:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:fe:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:fe:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:fe:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:fe:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:fe:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:fe:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
pci_bus 0000:fe: busn_res: can not insert [bus fe] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:ff:00.0: [8086:2c40] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:ff:02.4: [8086:2c14] type 00 class 0x060000
pci 0000:ff:02.5: [8086:2c15] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:ff:03.2: [8086:2c1a] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0006c000-0x0006ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7d443000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7d492000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7d65b000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f5ef000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
system 00:02: [io 0x0400-0x043f] has been reserved
system 00:02: [io 0x0440-0x045f] has been reserved
system 00:02: [io 0x0460-0x047f] has been reserved
system 00:02: [io 0x0580-0x05ff] has been reserved
system 00:02: [io 0x05e0-0x05ff] has been reserved
system 00:02: [io 0x0cf9] could not be reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:06: [mem 0x80000000-0x8fffffff] has been reserved
system 00:06: [mem 0xffc00000-0xffffffff] has been reserved
system 00:06: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:06: [mem 0xfe710000-0xfe711fff] has been reserved
system 00:06: [mem 0xfe800000-0xfe9fffff] has been reserved
system 00:06: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:06: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x0ca0-0x0ca1] has been reserved
system 00:07: [io 0x0ca4-0x0ca9] has been reserved
system 00:07: [io 0x0caa-0x0cab] has been reserved
system 00:07: [io 0x0cac-0x0ccb] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x0ca2] has been reserved
system 00:08: [io 0x0ca3] has been reserved
system 00:08: Plug and Play ACPI device, IDs IPI0001 PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xffe00000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-05] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x90000000-0x901fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 0b-0f]
pci 0000:00:01.0: bridge window [mem 0x92000000-0x95ffffff]
pci 0000:00:02.0: PCI bridge to [bus 10-14]
pci 0000:00:03.0: PCI bridge to [bus 15-19]
pci 0000:00:05.0: PCI bridge to [bus 1a-1e]
pci 0000:00:07.0: PCI bridge to [bus 1f-23]
pci 0000:00:09.0: PCI bridge to [bus 24-28]
pci 0000:01:00.0: BAR 6: assigned [mem 0x90000000-0x901fffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-05]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x97900000-0x979fffff]
pci 0000:00:1c.0: bridge window [mem 0x90000000-0x901fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [mem 0x97000000-0x978fffff]
pci 0000:06:00.0: bridge window [mem 0x96000000-0x96ffffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 06-0a]
pci 0000:00:1c.4: bridge window [mem 0x97000000-0x978fffff]
pci 0000:00:1c.4: bridge window [mem 0x96000000-0x96ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 29-2d]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xfdffffff window]
pci_bus 0000:0b: resource 1 [mem 0x92000000-0x95ffffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0x97900000-0x979fffff]
pci_bus 0000:01: resource 2 [mem 0x90000000-0x901fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0x97000000-0x978fffff]
pci_bus 0000:06: resource 2 [mem 0x96000000-0x96ffffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0x97000000-0x978fffff]
pci_bus 0000:07: resource 2 [mem 0x96000000-0x96ffffff pref]
pci_bus 0000:29: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:29: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:29: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:29: resource 7 [mem 0x90000000-0xfdffffff window]
pci_bus 0000:fe: resource 4 [io 0x0000-0xffff]
pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:07:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 50644K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x77f0b000-0x7bf0b000] (64MB) mapped at [000000005f730a44-000000004537503c]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
efifb: probing for efifb
efifb: framebuffer at 0x96000000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Can not request [mem 0x7f72e000-0x7f72fbff] for ERST.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
tpm_tis 00:05: 1.2 TPM (device-id 0xFE, rev-id 70)
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x2118 ctl 0x212c bmdma 0x20f0 irq 16
ata2: SATA max UDMA/133 cmd 0x2110 ctl 0x2128 bmdma 0x20f8 irq 16
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0x2108 ctl 0x2124 bmdma 0x20d0 irq 21
ata4: SATA max UDMA/133 cmd 0x2100 ctl 0x2120 bmdma 0x20d8 irq 21
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 19, io mem 0x97a21000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.0-999-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 17, io mem 0x97a20000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.0-999-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 17, io base 0x000020a0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.15.0-999-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 18, io base 0x00002080
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.15.0-999-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 17, io base 0x00002060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.15.0-999-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00002040
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.15.0-999-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 19, io base 0x00002020
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.15.0-999-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-1: new high-speed USB device number 2 using ehci-pci
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x106a5, pf=0x1, revision=0x19
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (2190107844, 0)->(2301840769, -111732925)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 56e5cc46dab1976245b7430d655c0bd35c5d3aa9'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
usb 2-1: New USB device found, idVendor=04b3, idProduct=4012
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: IBM Composite Device-0
usb 2-1: Manufacturer: IBM
usb 2-1: SerialNumber: 20070221-7
usb 3-1: new full-speed USB device number 2 using uhci_hcd
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
evm: HMAC attrs: 0x1
Magic number: 2:320:398
rtc_cmos 00:00: setting system clock to 2018-01-04 21:21:43 UTC (1515100903)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 3-1: New USB device found, idVendor=03f0, idProduct=a407
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: HP Link-5 micro dongle
usb 3-1: Manufacturer: HP
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.01: link offline, clearing class 3 to NONE
ata1.00: ATAPI: TSSTcorp CDDVDW TS-L633B, IB03, max UDMA/100
tsc: Refined TSC clocksource calibration: 2800.099 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c9e58530, max_idle_ns: 440795292978 ns
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633B IB03 PQ: 0 ANSI: 5
sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 2380K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel memory: 2008K
Freeing unused kernel memory: 1960K
usb 5-2: new full-speed USB device number 2 using uhci_hcd
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014)
bnx2 0000:0b:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem 92000000, IRQ 24, node addr e4:1f:13:6a:47:90
bnx2 0000:0b:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem 94000000, IRQ 30, node addr e4:1f:13:6a:47:92
hidraw: raw HID events driver (C) Jiri Kosina
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.20
mptbase: ioc0: Initiating bringup
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
checking generic (96000000 1e0000) vs hw (96000000 1000000)
fb: switching to mgag200drmfb from EFI VGA
Console: switching to colour dummy device 80x25
[TTM] Zone kernel: Available graphics memory: 8206156 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
bnx2 0000:0b:00.0 eno1: renamed from eth0
input: IBM IBM Composite Device-0 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:2.0/0003:04B3:4012.0001/input/input1
bnx2 0000:0b:00.1 eno2: renamed from eth1
fbcon: mgadrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
usb 5-2: New USB device found, idVendor=04b3, idProduct=4010
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: RNDIS/CDC ETHER
usb 5-2: Manufacturer: IBM
CE: hpet increased min_delta_ns to 20115 nsec
hid-generic 0003:04B3:4012.0001: input,hidraw0: USB HID v1.00 Keyboard [IBM IBM Composite Device-0] on usb-0000:00:1d.7-1/input0
input: IBM IBM Composite Device-0 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:2.1/0003:04B3:4012.0002/input/input2
hid-generic 0003:04B3:4012.0002: input,hidraw1: USB HID v1.00 Mouse [IBM IBM Composite Device-0] on usb-0000:00:1d.7-1/input1
input: IBM IBM Composite Device-0 as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:2.2/0003:04B3:4012.0003/input/input3
hid-generic 0003:04B3:4012.0003: input,hidraw2: USB HID v1.00 Mouse [IBM IBM Composite Device-0] on usb-0000:00:1d.7-1/input2
input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:03F0:A407.0004/input/input4
hid-generic 0003:03F0:A407.0004: input,hidraw3: USB HID v1.11 Keyboard [HP HP Link-5 micro dongle] on usb-0000:00:1a.0-1/input0
input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/0003:03F0:A407.0005/input/input5
hid-generic 0003:03F0:A407.0005: input,hiddev0,hidraw4: USB HID v1.11 Mouse [HP HP Link-5 micro dongle] on usb-0000:00:1a.0-1/input1
mgag200 0000:07:00.0: fb0: mgadrmfb frame buffer device
[drm] Initialized mgag200 1.0.0 20110418 for 0000:07:00.0 on minor 0
clocksource: Switched to clocksource tsc
ioc0: LSISAS1068E B3: Capabilities={Initiator}
scsi host4: ioc0: LSISAS1068E B3, FwRev=011e0a00h, Ports=1, MaxQ=277, IRQ=16
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 5, phy 0, sas_addr 0xb2ab3904e2bcf5c6
scsi 4:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg1 type 0
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 6, phy 1, sas_addr 0x1d1b2d1859836e2a
sd 4:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
scsi 4:0:1:0: Direct-Access ATA ST9160821AS E PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 73 00 00 08
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:1:0: Attached scsi generic sg2 type 0
mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 8, phy 2, sas_addr 0x51308205e8c7242
scsi 4:0:2:0: Direct-Access ATA ST9500325AS HPM1 PQ: 0 ANSI: 5
sd 4:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 4:0:2:0: Attached scsi generic sg3 type 0
sd 4:0:2:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sda: sda1 sda2 sda3 sda4
sd 4:0:0:0: [sda] Attached SCSI disk
sd 4:0:1:0: [sdb] Write Protect is off
sd 4:0:1:0: [sdb] Mode Sense: 73 00 00 08
sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:2:0: [sdc] Write Protect is off
sd 4:0:2:0: [sdc] Mode Sense: 73 00 00 08
sd 4:0:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 4:0:1:0: [sdb] Attached SCSI disk
sdc: sdc1
sd 4:0:2:0: [sdc] Attached SCSI disk
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Reached target User and Group Name Lookups.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
systemd-journald[369]: Received request to flush runtime journal from PID 1
ipmi message handler version 39.2
ipmi device interface
EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:fe:03.0 (INTERRUPT)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:fe:03.0 (POLLED)
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
EDAC PCI1: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
EDAC i7core: Driver loaded, 2 memory controller(s) found.
IPMI System Interface driver.
ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
ACPI Warning: SystemIO range 0x00000000000005A8-0x00000000000005AF conflicts with OpRegion 0x00000000000005A8-0x00000000000005AF (\_SB.PCI0.LPC0.GPE0) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000430-0x000000000000043F conflicts with OpRegion 0x0000000000000439-0x0000000000000439 (\_SB.PCI0.RIL) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000042F conflicts with OpRegion 0x000000000000040E-0x000000000000040E (\_SB.PCI0.RIT) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000042F conflicts with OpRegion 0x000000000000040C-0x000000000000040C (\_SB.PCI0.RTY) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:16.0: enabling device (0000 -> 0002)
ioatdma 0000:00:16.1: enabling device (0000 -> 0002)
ioatdma 0000:00:16.2: enabling device (0000 -> 0002)
ioatdma 0000:00:16.3: enabling device (0000 -> 0002)
ioatdma 0000:00:16.4: enabling device (0000 -> 0002)
ioatdma 0000:00:16.5: enabling device (0000 -> 0002)
ioatdma 0000:00:16.6: enabling device (0000 -> 0002)
ioatdma 0000:00:16.7: enabling device (0000 -> 0002)
ipmi_si dmi-ipmi-si.0: Found new BMC (man_id: 0x000002, prod_id: 0x00dc, dev_id: 0x20)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized
IPMI SSIF Interface driver
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
cdc_ether 5-2:1.0 usb0: register 'cdc_ether' at usb-0000:00:1d.0-2, CDC Ethernet Device, e6:1f:13:5c:47:93
usbcore: registered new interface driver cdc_ether
cdc_ether 5-2:1.0 enp0s29f0u2: renamed from usb0
audit: type=1400 audit(1515100934.765:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=715 comm="apparmor_parser"
audit: type=1400 audit(1515100934.773:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=719 comm="apparmor_parser"
audit: type=1400 audit(1515100934.773:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=720 comm="apparmor_parser"
audit: type=1400 audit(1515100934.777:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=716 comm="apparmor_parser"
audit: type=1400 audit(1515100934.841:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=713 comm="apparmor_parser"
audit: type=1400 audit(1515100934.893:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=718 comm="apparmor_parser"
audit: type=1400 audit(1515100934.917:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=717 comm="apparmor_parser"
audit: type=1400 audit(1515100934.921:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=717 comm="apparmor_parser"
audit: type=1400 audit(1515100934.921:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=717 comm="apparmor_parser"
audit: type=1400 audit(1515100934.965:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=712 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
bnx2 0000:0b:00.0: Direct firmware load for bnx2/bnx2-mips-09-6.2.1b.fw failed with error -2
bnx2: Can't load firmware file "bnx2/bnx2-mips-09-6.2.1b.fw"
IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
bnx2 0000:0b:00.1: Direct firmware load for bnx2/bnx2-mips-09-6.2.1b.fw failed with error -2
bnx2: Can't load firmware file "bnx2/bnx2-mips-09-6.2.1b.fw"
IPv6: ADDRCONF(NETDEV_UP): enp0s29f0u2: link is not ready
cdc_ether 5-2:1.0 enp0s29f0u2: kevent 12 may have been dropped
cdc_ether 5-2:1.0 enp0s29f0u2: kevent 12 may have been dropped
cdc_ether 5-2:1.0 enp0s29f0u2: kevent 12 may have been dropped
cdc_ether 5-2:1.0 enp0s29f0u2: kevent 12 may have been dropped
mgag200 0000:07:00.0: Video card doesn't support cursors with partial transparency.
mgag200 0000:07:00.0: Not enabling hardware cursor.
rfkill: input handler disabled
CE: hpet increased min_delta_ns to 30172 nsec
bnx2 0000:0b:00.0 eno1: using MSIX
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
bnx2 0000:0b:00.1 eno2: using MSIX
IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
bnx2 0000:0b:00.0 eno1: NIC Copper Link is Up, 100 Mbps full duplex
, receive & transmit flow control ON
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
bnx2 0000:0b:00.1 eno2: NIC Copper Link is Up, 100 Mbps full duplex
, receive & transmit flow control ON
IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready
usb 2-1: USB disconnect, device number 2
perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3139 > 3128), lowering kernel.perf_event_max_sample_rate to 63500
perf: interrupt took too long (3924 > 3923), lowering kernel.perf_event_max_sample_rate to 50750