dmesg - ubuntu-14.04

Return To ubuntu-14.04 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-77-generic (buildd@lgw01-09) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #99~14.04.1-Ubuntu SMP Tue Jun 28 19:17:10 UTC 2016 (Ubuntu 3.16.0-77.99~14.04.1-generic 3.16.7-ckt27)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000099af7fff] usable
BIOS-e820: [mem 0x0000000099af8000-0x000000009a2f8fff] reserved
BIOS-e820: [mem 0x000000009a2f9000-0x000000009f6befff] usable
BIOS-e820: [mem 0x000000009f6bf000-0x000000009fabefff] reserved
BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
BIOS-e820: [mem 0x000000009fc00000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP ENVY 15 Notebook PC/198A, BIOS F.18 11/06/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFE0000000 write-back
  2 base 00009FBBD000 mask FFFFFFFFF000 uncachable
  3 base 0000FFC00000 mask FFFFFFC00000 write-protect
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 000000042f000000 aka 17136M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x9fc00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fbf000, 0x01fbffff] PGTABLE
BRK [0x01fc0000, 0x01fc0fff] PGTABLE
BRK [0x01fc1000, 0x01fc1fff] PGTABLE
init_memory_mapping: [mem 0x42ee00000-0x42effffff]
 [mem 0x42ee00000-0x42effffff] page 2M
BRK [0x01fc2000, 0x01fc2fff] PGTABLE
init_memory_mapping: [mem 0x42c000000-0x42edfffff]
 [mem 0x42c000000-0x42edfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x42bffffff]
 [mem 0x400000000-0x42bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x99af7fff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3fffffff] page 2M
 [mem 0x40000000-0x7fffffff] page 1G
 [mem 0x80000000-0x999fffff] page 2M
 [mem 0x99a00000-0x99af7fff] page 4k
init_memory_mapping: [mem 0x9a2f9000-0x9f6befff]
 [mem 0x9a2f9000-0x9a3fffff] page 4k
 [mem 0x9a400000-0x9f5fffff] page 2M
 [mem 0x9f600000-0x9f6befff] page 4k
BRK [0x01fc3000, 0x01fc3fff] PGTABLE
BRK [0x01fc4000, 0x01fc4fff] PGTABLE
init_memory_mapping: [mem 0x9fbff000-0x9fbfffff]
 [mem 0x9fbff000-0x9fbfffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
 [mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x35960000-0x36ca7fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
ACPI: XSDT 0x000000009FBFE120 00008C (v01 HPQOEM SLIC-MPC 00000001 HP   01000013)
ACPI: FACP 0x000000009FBFC000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP   00040000)
ACPI: DSDT 0x000000009FBE5000 0122A5 (v01 HPQOEM 198B     F0000000 ACPI 00040000)
ACPI: FACS 0x000000009FB7A000 000040
ACPI: UEFI 0x000000009FBFD000 000236 (v01 HPQOEM 198B     00000001 HP   00040000)
ACPI: HPET 0x000000009FBFB000 000038 (v01 HPQOEM 198B     00000001 HP   00040000)
ACPI: APIC 0x000000009FBFA000 000084 (v03 HPQOEM 198B     00000001 HP   00040000)
ACPI: MCFG 0x000000009FBF9000 00003C (v01 HPQOEM 198B     00000001 HP   00040000)
ACPI: ASF! 0x000000009FBF8000 0000A5 (v32 HPQOEM 198B     00000001 HP   00040000)
ACPI: BOOT 0x000000009FBE4000 000028 (v01 HPQOEM 198B     00000001 HP   00040000)
ACPI: WDRT 0x000000009FBE3000 000047 (v01 HPQOEM 198B     00000000 HP   00040000)
ACPI: WDAT 0x000000009FBE2000 0001AC (v01 HPQOEM 198B     00000001 HP   00040000)
ACPI: FPDT 0x000000009FBE0000 000044 (v01 HPQOEM 198B     00000001 HP   00040000)
ACPI: MSDM 0x000000009FBDF000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00040000)
ACPI: SSDT 0x000000009FBDE000 0009F8 (v01 HPQOEM 198B     00000001 ACPI 00040000)
ACPI: SSDT 0x000000009FBDC000 001F6E (v02 HPQOEM 198B     00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042effffff]
Initmem setup node 0 [mem 0x00000000-0x42effffff]
  NODE_DATA [mem 0x42eff8000-0x42effcfff]
 [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f200000-ffff88042e5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x42effffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0x99af7fff]
  node   0: [mem 0x9a2f9000-0x9f6befff]
  node   0: [mem 0x9fbff000-0x9fbfffff]
  node   0: [mem 0x100000000-0x42effffff]
On node 0 totalpages: 3989085
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 10107 pages used for memmap
  DMA32 zone: 646847 pages, LIFO batch:31
  Normal zone: 52160 pages used for memmap
  Normal zone: 3338240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x99af8000-0x9a2f8fff]
PM: Registered nosave memory: [mem 0x9f6bf000-0x9fabefff]
PM: Registered nosave memory: [mem 0x9fabf000-0x9fbbefff]
PM: Registered nosave memory: [mem 0x9fbbf000-0x9fbfefff]
PM: Registered nosave memory: [mem 0x9fc00000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88042ec00000 s81408 r8192 d20992 u524288
pcpu-alloc: s81408 r8192 d20992 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 3926733
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
AGP: Your BIOS doesn't leave a aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0x94000000-0x97ffffff] (65536KB)
PM: Registered nosave memory: [mem 0x94000000-0x97ffffff]
Memory: 15538200K/15956340K available (7658K kernel code, 1133K rwdata, 3620K rodata, 1356K init, 1300K bss, 418140K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 63963136 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2495.389 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.77 BogoMIPS (lpj=9981556)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
tseg: 009fc00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e70000 - ffffffff81e78000)
ftrace: allocating 29318 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-5750M APU with Radeon(tm) HD Graphics (fam: 15, model: 13, stepping: 01)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
 #2[    0.220644] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
 #3
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19963.11 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 17:48:55, date: 12/23/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0b1f]
pci_bus 0000:00: root bus resource [io  0x0b40-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:01.0: [1002:990b] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:01.0: reg 0x14: [io  0x4000-0x40ff]
pci 0000:00:01.0: reg 0x18: [mem 0xf0500000-0xf053ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xf0544000-0xf0547fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xf0548000-0xf0549fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xf054a000-0xf054bfff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0x4118-0x411f]
pci 0000:00:11.0: reg 0x14: [io  0x4124-0x4127]
pci 0000:00:11.0: reg 0x18: [io  0x4110-0x4117]
pci 0000:00:11.0: reg 0x1c: [io  0x4120-0x4123]
pci 0000:00:11.0: reg 0x20: [io  0x4100-0x410f]
pci 0000:00:11.0: reg 0x24: [mem 0xf0550000-0xf05507ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xf054f000-0xf054ffff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xf054e000-0xf054e0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xf054d000-0xf054dfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xf054c000-0xf054c0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf0540000-0xf0543fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:15.3: [1022:43a3] type 01 class 0x060400
pci 0000:00:15.3: supports D1 D2
pci 0000:00:15.3: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [1002:6600] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf0400000-0xf043ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:02.0:   bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:02.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf0300000-0xf0300fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:04.0:   bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0000-0x0b1f] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0b40-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1814:3290] type 00 class 0x028000
pci 0000:05:00.0: reg 0x10: [mem 0xf0210000-0xf021ffff]
pci 0000:05:00.0: PME# supported from D0 D3hot
pci 0000:05:00.1: [1814:3298] type 00 class 0x0d1100
pci 0000:05:00.1: reg 0x10: [mem 0xf0200000-0xf020ffff]
pci 0000:05:00.1: supports D1
pci 0000:05:00.1: PME# supported from D0 D1 D3hot
pci 0000:00:15.1: PCI bridge to [bus 05]
pci 0000:00:15.1:   bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:06:00.0: [10ec:5229] type 00 class 0xff0000
pci 0000:06:00.0: reg 0x10: [mem 0xf0100000-0xf0100fff]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D1 D2 D3hot
pci 0000:00:15.3: PCI bridge to [bus 06]
pci 0000:00:15.3:   bridge window [mem 0xf0100000-0xf01fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: IRQ 7 override to edge, high
ACPI: Enabled 6 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0x99af8000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9f6bf000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs SYN1e9a SYN1e00 SYN0002 PNP0f13 (active)
system 00:04: [io  0x0400-0x04cf] could not be reserved
system 00:04: [io  0x04d0-0x04d1] has been reserved
system 00:04: [io  0x04d6] has been reserved
system 00:04: [io  0x0680-0x06ff] has been reserved
system 00:04: [io  0x077a] has been reserved
system 00:04: [io  0x0c00-0x0c01] has been reserved
system 00:04: [io  0x0c14] has been reserved
system 00:04: [io  0x0c50-0x0c52] has been reserved
system 00:04: [io  0x0c6c] has been reserved
system 00:04: [io  0x0c6f] has been reserved
system 00:04: [io  0x0cd0-0x0cdb] has been reserved
system 00:04: [io  0x0840-0x0847] has been reserved
system 00:04: [io  0x0500-0x05fe] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
ACPI: bus type PNP unregistered
pci 0000:00:15.1: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
pci 0000:00:15.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
pci 0000:00:15.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:15.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:15.1: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:15.1: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf0440000-0xf045ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:02.0:   bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:02.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:04.0:   bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:15.0: PCI bridge to [bus 04]
pci 0000:00:15.1: PCI bridge to [bus 05]
pci 0000:00:15.1:   bridge window [io  0x1000-0x1fff]
pci 0000:00:15.1:   bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:15.1:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:15.3: PCI bridge to [bus 06]
pci 0000:00:15.3:   bridge window [mem 0xf0100000-0xf01fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0b1f]
pci_bus 0000:00: resource 5 [io  0x0b40-0x0cf7]
pci_bus 0000:00: resource 6 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 9 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 10 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 18 [mem 0xd0000000-0xf7ffffff]
pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf0400000-0xf04fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf0300000-0xf03fffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:03: resource 4 [io  0x0000-0x0b1f]
pci_bus 0000:03: resource 5 [io  0x0b40-0x0cf7]
pci_bus 0000:03: resource 6 [io  0x0d00-0xffff]
pci_bus 0000:03: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 8 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:03: resource 9 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:03: resource 10 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:03: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:03: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:03: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:03: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:03: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:03: resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:03: resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:03: resource 18 [mem 0xd0000000-0xf7ffffff]
pci_bus 0000:03: resource 19 [mem 0xfc000000-0xfed3ffff]
pci_bus 0000:03: resource 20 [mem 0xfed45000-0xffffffff]
pci_bus 0000:05: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf02fffff]
pci_bus 0000:05: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xf0100000-0xf01fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19744K (ffff880035960000 - ffff880036ca8000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9b6bf000-0x9f6bf000] (64MB) mapped at [ffff88009b6bf000-ffff88009f6befff]
Simple Boot Flag at 0x44 set to 0x1
perf: AMD NB counters detected
microcode: CPU0: patch_level=0x06001119
microcode: CPU1: patch_level=0x06001119
microcode: CPU2: patch_level=0x06001119
microcode: CPU3: patch_level=0x06001119
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1514051336.512:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 30386
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:15.1: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:02.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:00:02.0:pcie04: service driver pciehp loaded
pciehp 0000:00:15.1:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
pciehp 0000:00:15.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90005c00000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (on)
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (50 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ1] (50 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ACPI: Battery Slot [BAT0] (battery present)
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf054e000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-77-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xf054c000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-77-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 18, io mem 0xf054f000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.16.0-77-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:13.0: irq 18, io mem 0xf054d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.16.0-77-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-77-generic xhci_hcd
usb usb5: SerialNumber: 0000:00:10.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-77-generic xhci_hcd
usb usb6: SerialNumber: 0000:00:10.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7
xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.16.0-77-generic xhci_hcd
usb usb7: SerialNumber: 0000:00:10.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.16.0-77-generic xhci_hcd
usb usb8: SerialNumber: 0000:00:10.1
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 4a94aff5eff7b539906b3f2a9d0cca00dac4cbb0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 13:357:846
rtc_cmos 00:01: setting system clock to 2017-12-23 17:48:57 UTC (1514051337)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1356K (ffffffff81d1d000 - ffffffff81e70000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 524K (ffff88000177d000 - ffff880001800000)
Freeing unused kernel memory: 476K (ffff880001b89000 - ffff880001c00000)
systemd-udevd[119]: starting version 204
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ahci 0000:00:11.0: version 3.0
rtsx_pci 0000:06:00.0: irq 52 for MSI/MSI-X
ahci 0000:00:11.0: irq 53 for MSI/MSI-X
rtsx_pci 0000:06:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 52
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x9 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs 
r8169 0000:02:00.0: irq 54 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc900018f4000, 2c:44:fd:ad:c3:ca, XID 0c000880 IRQ 54
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf0550000 port 0xf0550100 irq 53
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf0550000 port 0xf0550280 irq 53
usb 4-1: new full-speed USB device number 2 using ohci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5660], y [..4702]
ata4: SATA link down (SStatus 0 SControl 300)
psmouse serio1: synaptics: queried min coordinates: x [1282..], y [1152..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00, board id: 2667, fw id: 1280283
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
tsc: Refined TSC clocksource calibration: 2495.336 MHz
usb 4-1: New USB device found, idVendor=138a, idProduct=0050
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 4-1: SerialNumber: d30f0020cc36
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: SanDisk SDSSDHP256G, X211200, max UDMA/133
ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDSSDHP2 200  PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda3 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 38 bits of entropy available
usb 5-1: new high-speed USB device number 2 using xhci_hcd
init: plymouth-upstart-bridge main process (188) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (197) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (201) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (202) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 5-1: New USB device found, idVendor=1a40, idProduct=0101
usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-1: Product: USB 2.0 Hub
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
Adding 499708k swap on /dev/sda6.  Priority:-1 extents:1 across:499708k SSFS
systemd-udevd[322]: starting version 204
usb 8-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 8-2: LPM exit latency is zeroed, disabling LPM.
usb 8-2: New USB device found, idVendor=04c5, idProduct=2028
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: ZM-VE300
usb 8-2: Manufacturer: ZALMAN
usb 8-2: SerialNumber: ______XX00000001
EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
usb-storage 8-2:1.0: USB Mass Storage device detected
scsi4 : usb-storage 8-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 5-1.2: new high-speed USB device number 3 using xhci_hcd
usb 5-1.2: New USB device found, idVendor=04e8, idProduct=6860
usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1.2: Product: SAMSUNG_Android
usb 5-1.2: Manufacturer: SAMSUNG
usb 5-1.2: SerialNumber: db1108bb
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
audit: type=1400 audit(1514051338.947:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=467 comm="apparmor_parser"
audit: type=1400 audit(1514051338.947:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=467 comm="apparmor_parser"
Initializing HPQ6001 module
input: HP Wireless hotkeys as /devices/virtual/input/input6
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usb 5-1.3: new full-speed USB device number 4 using xhci_hcd
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
init: cups main process (484) killed by HUP signal
init: cups main process ended, respawning
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
usb 5-1.3: New USB device found, idVendor=044f, idProduct=b108
usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.3: Product: T.Flight Hotas X
usb 5-1.3: Manufacturer: Thrustmaster
usb 5-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB_.PCI0.SMBS.SMB0) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
wmi: Mapper loaded
audit: type=1400 audit(1514051339.119:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=525 comm="apparmor_parser"
audit: type=1400 audit(1514051339.119:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=525 comm="apparmor_parser"
audit: type=1400 audit(1514051339.119:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=525 comm="apparmor_parser"
Switched to clocksource tsc
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
usb 5-1.4: new high-speed USB device number 5 using xhci_hcd
fglrx: module verification failed: signature and/or  required key missing - tainting kernel
cfg80211: Calling CRDA to update world regulatory domain
[fglrx] Maximum main memory to use for locked dma buffers: 14835 MBytes.
[fglrx]   vendor: 1002 device: 990b revision: 0 count: 1
[fglrx]   vendor: 1002 device: 6600 revision: 0 count: 2
[fglrx] ioport: bar 1, base 0x4000, size: 0x100
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
snd_hda_intel 0000:00:01.1: irq 55 for MSI/MSI-X
[fglrx] ioport: bar 4, base 0x3000, size: 0x100
pci 0000:01:00.0: enabling device (0000 -> 0003)
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 15.20.3 [Sep  8 2015] with 2 minors
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
sound hdaudioC1D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
sound hdaudioC1D0:    mono: mono_out=0x0
sound hdaudioC1D0:    inputs:
sound hdaudioC1D0:      Internal Mic=0x11
sound hdaudioC1D0:      Mic=0xa
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
AVX version of gcm_enc/dec engaged.
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
usb 5-1.4: New USB device found, idVendor=1a40, idProduct=0101
usb 5-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-1.4: Product: USB 2.0 Hub
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
hub 5-1.4:1.0: USB hub found
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
hub 5-1.4:1.0: 4 ports detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
acpi device:00: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
hp_accel: laptop model unknown, using default axes configuration
lis3lv02d: 8 bits 3DC sensor found
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Thrustmaster T.Flight Hotas X as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1.3/5-1.3:1.0/0003:044F:B108.0001/input/input12
hid-generic 0003:044F:B108.0001: input,hidraw0: USB HID v1.00 Joystick [Thrustmaster T.Flight Hotas X] on usb-0000:00:10.0-1.3/input0
ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
init: failsafe main process (644) killed by TERM signal
random: nonblocking pool is initialized
acpi device:02: registered as cooling_device6
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:01/input/input13
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input14
usb 5-1.4.3: new full-speed USB device number 6 using xhci_hcd
audit: type=1400 audit(1514051339.616:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=820 comm="apparmor_parser"
audit: type=1400 audit(1514051339.616:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=820 comm="apparmor_parser"
audit: type=1400 audit(1514051339.616:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=820 comm="apparmor_parser"
audit: type=1400 audit(1514051339.620:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=819 comm="apparmor_parser"
usb 5-1.4.3: New USB device found, idVendor=3938, idProduct=1032
usb 5-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.4.3: Product: 2.4G RF Keyboard & Mouse
usb 5-1.4.3: Manufacturer: MOSART Semi.
usb 5-1.4.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1.4/5-1.4.3/5-1.4.3:1.0/0003:3938:1032.0002/input/input15
hid-generic 0003:3938:1032.0002: input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-0000:00:10.0-1.4.3/input0
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
input: MOSART Semi. 2.4G RF Keyboard & Mouse as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1.4/5-1.4.3/5-1.4.3:1.1/0003:3938:1032.0003/input/input16
hid-generic 0003:3938:1032.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [MOSART Semi. 2.4G RF Keyboard & Mouse] on usb-0000:00:10.0-1.4.3/input1
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
scsi 4:0:0:0: Direct-Access     ZALMAN    External HDD         PQ: 0 ANSI: 6
scsi 4:0:0:1: CD-ROM            ZALMAN    Virtual CD-Rom       PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 1f 00 00 08
sr0: scsi3-mmc drive: 4x/4x tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:1: Attached scsi CD-ROM sr0
sr 4:0:0:1: Attached scsi generic sg2 type 5
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
usb 5-1.4.4: new full-speed USB device number 7 using xhci_hcd
 sdb: unknown partition table
sd 4:0:0:0: [sdb] Attached SCSI disk
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 5-1.4.4: New USB device found, idVendor=0a5c, idProduct=2046
usb 5-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1.4.4: Product: BCM2046B1
usb 5-1.4.4: Manufacturer: Broadcom Corp
usb 5-1.4.4: SerialNumber: 000000000000
usbcore: registered new interface driver btusb
raid6: sse2x1    5520 MB/s
input: HP WMI hotkeys as /devices/virtual/input/input11
init: plymouth-upstart-bridge main process ended, respawning
raid6: sse2x2    8048 MB/s
raid6: sse2x4    9137 MB/s
raid6: using algorithm sse2x4 (9137 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
   avx       :  3824.000 MB/sec
Btrfs loaded
BTRFS: device fsid d2cb2293-a236-44e2-aca9-bec8ef0063c9 devid 1 transid 3314 /dev/sdb
init: plymouth-stop pre-start process (1155) terminated with status 1
fglrx_pci 0000:00:01.0: irq 56 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1167
[fglrx] Firegl kernel thread PID: 1168
[fglrx] Firegl kernel thread PID: 1169
[fglrx] IRQ 56 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:fab4000, size:4000 
[fglrx] Reserved FB block: Unshared offset:fab8000, size:548000 
[fglrx] Reserved FB block: Unshared offset:2ffed000, size:13000 
wlan0: authenticate with 4c:5e:0c:51:0b:6e
wlan0: send auth to 4c:5e:0c:51:0b:6e (try 1/3)
wlan0: send auth to 4c:5e:0c:51:0b:6e (try 2/3)
wlan0: send auth to 4c:5e:0c:51:0b:6e (try 3/3)
wlan0: authenticated
wlan0: associate with 4c:5e:0c:51:0b:6e (try 1/3)
wlan0: RX AssocResp from 4c:5e:0c:51:0b:6e (capab=0x421 status=0 aid=8)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
init: plymouth-splash main process (1207) terminated with status 1
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
vgaarb: this pci device is not a vga device
fglrx_pci 0000:01:00.0: irq 57 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1349
[fglrx] Firegl kernel thread PID: 1350
[fglrx] Firegl kernel thread PID: 1351
[fglrx] IRQ 57 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000 
[fglrx] Reserved FB block: Unshared offset:f7b8000, size:548000 
[fglrx] Reserved FB block: Unshared offset:7ffee000, size:12000 
[fglrx] ATIF platform detected with notification ID: 0x81
[fglrx] ATIF platform detected with notification ID: 0x81
BTRFS info (device sdb): disk space caching is enabled
BTRFS: has skinny extents
audit_printk_skb: 51 callbacks suppressed
audit: type=1400 audit(1514051369.080:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2342 comm="apparmor_parser"
audit: type=1400 audit(1514051369.080:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2342 comm="apparmor_parser"
usb 5-1.2: reset high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:10.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417535948
xhci_hcd 0000:00:10.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417535900
xhci_hcd 0000:00:10.0: xHCI xhci_drop_endpoint called with disabled ep ffff880417535990
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[2952]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
audit: type=1400 audit(1514051630.150:30): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/media/ktraglin/69def178-6022-4057-8924-9f2cca3c4088/ktraglin/Documents/Aug1ConEdPmt" pid=2963 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1514051630.154:31): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/media/ktraglin/69def178-6022-4057-8924-9f2cca3c4088/ktraglin/Documents/Aug1ConEdPmt" pid=2963 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1514051632.816:32): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6B747261676C696E2F36396465663137382D363032322D343035372D383932342D3966326363613363343038382F6B747261676C696E2F446F63756D656E74732F5061796565206C697374 pid=2998 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1514051632.816:33): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6B747261676C696E2F36396465663137382D363032322D343035372D383932342D3966326363613363343038382F6B747261676C696E2F446F63756D656E74732F5061796565206C697374 pid=2998 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1514051632.840:34): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6B747261676C696E2F36396465663137382D363032322D343035372D383932342D3966326363613363343038382F6B747261676C696E2F446F63756D656E74732F5061796565206C697374202D2052656E74 pid=3000 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1514051632.840:35): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6B747261676C696E2F36396465663137382D363032322D343035372D383932342D3966326363613363343038382F6B747261676C696E2F446F63756D656E74732F5061796565206C697374202D2052656E74 pid=3000 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1514051632.864:36): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/media/ktraglin/69def178-6022-4057-8924-9f2cca3c4088/ktraglin/Documents/PostOfficeRedeliveryRequest" pid=3002 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1514051632.864:37): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/media/ktraglin/69def178-6022-4057-8924-9f2cca3c4088/ktraglin/Documents/PostOfficeRedeliveryRequest" pid=3002 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1514051632.888:38): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6B747261676C696E2F36396465663137382D363032322D343035372D383932342D3966326363613363343038382F6B747261676C696E2F446F63756D656E74732F506F7374204F66666963652073637265777570 pid=3004 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1514051632.888:39): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6B747261676C696E2F36396465663137382D363032322D343035372D383932342D3966326363613363343038382F6B747261676C696E2F446F63756D656E74732F506F7374204F66666963652073637265777570 pid=3004 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
wlan0: deauthenticating from 4c:5e:0c:51:0b:6e by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 4c:5e:0c:51:0b:6e
wlan0: send auth to 4c:5e:0c:51:0b:6e (try 1/3)
wlan0: send auth to 4c:5e:0c:51:0b:6e (try 2/3)
wlan0: authenticated
wlan0: associate with 4c:5e:0c:51:0b:6e (try 1/3)
wlan0: associate with 4c:5e:0c:51:0b:6e (try 2/3)
wlan0: RX AssocResp from 4c:5e:0c:51:0b:6e (capab=0x421 status=0 aid=6)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

Return To ubuntu-14.04 System Information