dmesg - Spielen
Linux version 4.14.5-39.current (root@builder.solus-project.com) (gcc version 7.2.0 (Solus)) #1 SMP Sun Dec 10 13:59:36 UTC 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] ACPI data
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Hypervisor detected: KVM
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR variable ranges disabled:
MTRR: Disabled
x86/PAT: MTRRs disabled, skipping PAT initialization too.
CPU MTRRs all blank - virtualized system.
x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffffffffff200ff0]
Base memory trampoline at [ffff880000099000] 99000 size 24576
BRK [0x0215b000, 0x0215bfff] PGTABLE
BRK [0x0215c000, 0x0215cfff] PGTABLE
BRK [0x0215d000, 0x0215dfff] PGTABLE
BRK [0x0215e000, 0x0215efff] PGTABLE
BRK [0x0215f000, 0x0215ffff] PGTABLE
RAMDISK: [mem 0x3525e000-0x36926fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
ACPI: XSDT 0x000000007FFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 0x000000007FFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 0x000000007FFF0470 0021FF (v02 VBOX VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 0x000000007FFF0200 000040
ACPI: FACS 0x000000007FFF0200 000040
ACPI: APIC 0x000000007FFF0240 00005C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
ACPI: SSDT 0x000000007FFF02A0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007ffeffff]
NODE_DATA(0) allocated [mem 0x7ffee000-0x7ffeffff]
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:7ffed001, primary cpu clock
kvm-clock: using sched offset of 8511021453 cycles
clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000007ffeffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007ffeffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffeffff]
On node 0 totalpages: 524174
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8128 pages used for memmap
DMA32 zone: 520176 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x80000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on KVM
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:48 nr_cpumask_bits:48 nr_cpu_ids:2 nr_node_ids:1
percpu: Embedded 37 pages/cpu @ffff88007fc00000 s113368 r8192 d29992 u1048576
pcpu-alloc: s113368 r8192 d29992 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
Built 1 zonelists, mobility grouping on. Total pages: 515961
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 2022340K/2096696K available (9252K kernel code, 1195K rwdata, 2472K rodata, 1516K init, 600K bss, 74356K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
ftrace: allocating 34949 entries in 137 pages
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=48 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
Offload RCU callbacks from CPUs: .
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Detected 3600.002 MHz processor
Calibrating delay loop (skipped) preset value.. 7200.00 BogoMIPS (lpj=3600002)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170728
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 0 MCE banks
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 1
x2apic enabled
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only.
Hierarchical SRCU implementation.
NMI watchdog: Perf event create on CPU 0 failed with -2
NMI watchdog: Perf NMI watchdog permanently disabled
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
kvm-clock: cpu 1, msr 0:7ffed041, secondary cpu clock
mce: CPU supports 0 MCE banks
smp: Brought up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (14400.00 BogoMIPS)
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
xor: automatically using best checksumming function avx
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
raid6: sse2x1 gen() 13687 MB/s
raid6: sse2x1 xor() 9228 MB/s
raid6: sse2x2 gen() 14941 MB/s
raid6: sse2x2 xor() 10087 MB/s
raid6: sse2x4 gen() 17886 MB/s
raid6: sse2x4 xor() 11201 MB/s
raid6: avx2x1 gen() 26195 MB/s
raid6: avx2x1 xor() 17308 MB/s
raid6: avx2x2 gen() 28890 MB/s
raid6: avx2x2 xor() 18576 MB/s
raid6: avx2x4 gen() 33765 MB/s
raid6: avx2x4 xor() 22283 MB/s
raid6: using algorithm avx2x4 gen() 33765 MB/s
raid6: .... xor() 22283 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 07
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfdffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 0x18: [io 0xd010-0xd017]
pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f]
pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff]
pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI
pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB
pci 0000:00:0b.0: [8086:265c] type 00 class 0x0c0320
pci 0000:00:0b.0: reg 0x10: [mem 0xf0805000-0xf0805fff]
pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247]
pci 0000:00:0d.0: reg 0x14: [io 0xd248-0xd24b]
pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257]
pci 0000:00:0d.0: reg 0x1c: [io 0xd258-0xd25b]
pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f]
pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11)
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource kvm-clock
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp: PnP ACPI: found 2 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xfdffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 23332K
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 10737418240 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-0 Joules
RAPL PMU: hw unit of domain package 2^-0 Joules
RAPL PMU: hw unit of domain dram 2^-0 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-0 Joules
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1513322609.245:1): state=initialized audit_enabled=0 res=1
workingset: timestamp_bits=44 max_order=19 bucket_order=0
SGI XFS with ACLs, security attributes, realtime, no debug enabled
NET: Registered protocol family 38
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
intel_idle: does not run on family 6 model 60
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
device-mapper: multipath round-robin: version 1.2.0 loaded
device-mapper: multipath queue-length: version 0.2.0 loaded
device-mapper: multipath service-time: version 0.3.0 loaded
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (543103150, 0)->(677701187, -134598037)
registered taskstats version 1
Btrfs loaded, crc32c=crc32c-intel
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
rtc_cmos rtc_cmos: setting system clock to 2017-12-15 07:23:19 UTC (1513322599)
ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
Freeing unused kernel memory: 1516K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 960K
Freeing unused kernel memory: 1624K
rodata_test: all tests were successful
systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
systemd[1]: Detected virtualization oracle.
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Reached target Timers.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci 0000:00:0b.0: EHCI Host Controller
ehci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:0b.0: irq 19, io mem 0xf0805000
sr 1:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ehci-pci 0000:00:0b.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.14.5-39.current ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
ahci 0000:00:0d.0: version 3.0
ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
ohci-pci: OHCI PCI platform driver
scsi host2: ahci
ata3: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21
ohci-pci 0000:00:06.0: OHCI PCI host controller
ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:06.0: irq 22, io mem 0xf0804000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 4.14.5-39.current ohci_hcd
usb usb2: SerialNumber: 0000:00:06.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 12 ports detected
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata3.00: 104857600 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 104857600 512-byte logical blocks: (53.7 GB/50.0 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
PM: Image not found (code -22)
usb 2-1: new full-speed USB device number 2 using ohci-pci
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
tsc: Refined TSC clocksource calibration: 3602.247 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33ec9dc86d4, max_idle_ns: 440795280684 ns
usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-1: Product: USB Tablet
usb 2-1: Manufacturer: VirtualBox
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/0003:80EE:0021.0001/input/input2
hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
systemd-journald[198]: Received SIGTERM from PID 1 (systemd).
random: crng init done
systemd: 16 output lines suppressed due to ratelimiting
audit: type=1305 audit(1513322602.280:2): audit_enabled=1 old=1 auid=4294967295 ses=4294967295 res=1
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[378]: Received request to flush runtime journal from PID 1
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input4
ACPI: Sleep Button [SLPF]
vboxguest: loading out-of-tree module taints kernel.
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
vgdrvHeartbeatInit: Setting up heartbeat to trigger every 2000 milliseconds
input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input6
vboxguest: misc device minor 57, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
vboxguest: Successfully loaded version 5.2.2 (interface 0x00010004)
piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
ppdev: user-space parallel port driver
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input7
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:c3:38:38
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
e1000 0000:00:03.0 enp0s3: renamed from eth0
Adding 3906244k swap on /dev/sda1. Priority:-2 extents:1 across:3906244k
snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
[drm] VRAM 08000000
[TTM] Zone kernel: Available graphics memory: 1024904 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
fbcon: vboxdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 100x37
vboxvideo 0000:00:02.0: fb0: vboxdrmfb frame buffer device
[drm] Initialized vboxvideo 1.0.0 20130823 for 0000:00:02.0 on minor 0
vboxsf: Successfully loaded version 5.2.2 (interface 0x00010004)
IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
VBoxService 5.2.2 r119230 (verbosity: 0) linux.amd64 (Nov 22 2017 17:22:52) release log
00:00:00.000429 main Log opened 2017-12-15T07:23:30.759842000Z
00:00:00.000597 main OS Product: Linux
00:00:00.001044 main OS Release: 4.14.5-39.current
00:00:00.001333 main OS Version: #1 SMP Sun Dec 10 13:59:36 UTC 2017
00:00:00.001438 main Executable: /opt/VBoxGuestAdditions-5.2.2/sbin/VBoxService
00:00:00.001441 main Process ID: 537
00:00:00.001444 main Package type: LINUX_64BITS_GENERIC
00:00:00.003991 main 5.2.2 r119230 started. Verbose level = 0
fuse init (API version 7.26)
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000 0000:00:03.0 enp0s3: Detected Tx Unit Hang
Tx Queue
TDH
TDT
next_to_use
next_to_clean
buffer_info[next_to_clean]
time_stamp
next_to_watch
jiffies
next_to_watch.status
e1000 0000:00:03.0 enp0s3: Detected Tx Unit Hang
Tx Queue
TDH
TDT
next_to_use
next_to_clean
buffer_info[next_to_clean]
time_stamp
next_to_watch
jiffies
next_to_watch.status
e1000 0000:00:03.0 enp0s3: Detected Tx Unit Hang
Tx Queue
TDH
TDT
next_to_use
next_to_clean
buffer_info[next_to_clean]
time_stamp
next_to_watch
jiffies
next_to_watch.status
e1000 0000:00:03.0 enp0s3: Detected Tx Unit Hang
Tx Queue
TDH
TDT
next_to_use
next_to_clean
buffer_info[next_to_clean]
time_stamp
next_to_watch
jiffies
next_to_watch.status
NETDEV WATCHDOG: enp0s3 (e1000): transmit queue 0 timed out
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:320 dev_watchdog+0x21b/0x220
Modules linked in: fuse vboxsf(O) joydev vboxvideo(O) snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ppdev evdev soundcore e1000 parport_pc psmouse ac97_bus parport battery i2c_piix4 vboxguest(O) video ac button hid_generic usbhid hid sd_mod ohci_pci serio_raw sr_mod cdrom ahci libahci ohci_hcd ehci_pci ehci_hcd usbcore usb_common
CPU: 1 PID: 0 Comm: swapper/1 Tainted: G O 4.14.5-39.current #1
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
task: ffff88007c8b2c40 task.stack: ffffc90000374000
RIP: 0010:dev_watchdog+0x21b/0x220
RSP: 0018:ffff88007fd03e40 EFLAGS: 00010286
RAX: 000000000000003b RBX: 0000000000000000 RCX: 000000000000083f
RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000083f
RBP: ffff88007fd03e70 R08: 0000000000000001 R09: 00000000000001e2
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000001 R14: ffff880036206000 R15: ffff880036245480
FS: 0000000000000000(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3a55440020 CR3: 000000007b282000 CR4: 00000000000406e0
Call Trace:
? qdisc_rcu_free+0x50/0x50
call_timer_fn+0x33/0x130
expire_timers+0xa9/0x100
run_timer_softirq+0x138/0x170
? ktime_get+0x40/0xa0
? native_apic_msr_write+0x2b/0x40
? lapic_next_event+0x1d/0x30
? clockevents_program_event+0xce/0x100
__do_softirq+0xcd/0x2be
irq_exit+0xea/0xf0
smp_apic_timer_interrupt+0x69/0x120
apic_timer_interrupt+0x9d/0xb0
RIP: 0010:native_safe_halt+0x6/0x10
RSP: 0018:ffffc90000377e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
RAX: 0000000080000000 RBX: ffffffff81f23500 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc90000377e98 R08: 00000ac751d5ebf0 R09: ffffc900026a3d48
R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
default_idle+0x20/0x100
arch_cpu_idle+0xf/0x20
default_idle_call+0x23/0x30
do_idle+0x167/0x1d0
cpu_startup_entry+0x64/0x70
start_secondary+0x154/0x160
secondary_startup_64+0xa5/0xa5
Code: 63 8e 60 04 00 00 eb 95 4c 89 f7 c6 05 ac 9b 6f 00 01 e8 59 77 fd ff 89 d9 48 89 c2 4c 89 f6 48 c7 c7 c0 7d bf 81 e8 a6 52 91 ff ff eb c3 90 0f 1f 44 00 00 48 c7 47 08 00 00 00 00 55 48 c7
---[ end trace dd9b2f757ce2054e ]---
e1000 0000:00:03.0 enp0s3: Reset adapter
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: enp0s3 NIC Link is Down
e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX