dmesg - a
random: get_random_bytes called from start_kernel+0x42/0x4e1 with crng_init=0
Linux version 4.13.0-16-generic (buildd@lcy01-02) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu2)) #19-Ubuntu SMP Wed Oct 11 18:35:14 UTC 2017 (Ubuntu 4.13.0-16.19-generic 4.13.4)
Command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000069142fff] usable
BIOS-e820: [mem 0x0000000069143000-0x0000000069143fff] ACPI NVS
BIOS-e820: [mem 0x0000000069144000-0x0000000069144fff] reserved
BIOS-e820: [mem 0x0000000069145000-0x000000007a172fff] usable
BIOS-e820: [mem 0x000000007a173000-0x000000007a52ffff] reserved
BIOS-e820: [mem 0x000000007a530000-0x000000007a573fff] ACPI data
BIOS-e820: [mem 0x000000007a574000-0x000000007ac18fff] ACPI NVS
BIOS-e820: [mem 0x000000007ac19000-0x000000007b51ffff] reserved
BIOS-e820: [mem 0x000000007b520000-0x000000007b5fefff] type 20
BIOS-e820: [mem 0x000000007b5ff000-0x000000007b5fffff] usable
BIOS-e820: [mem 0x000000007b600000-0x000000007f7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000047e7fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ACPI=0x7a53d000 ACPI 2.0=0x7a53d000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 ESRT=0x7b29f118 MEMATTR=0x77a11018
random: fast init done
SMBIOS 3.0.0 present.
DMI: Dell Inc. XPS 13 9360/02PG84, BIOS 2.2.1 08/18/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x47e800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 007E000000 mask 7FFE000000 uncachable
2 base 007D000000 mask 7FFF000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x7b600 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000007b29f118 to 0x000000007b29f150.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9df3c0098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x2f9523000, 0x2f9523fff] PGTABLE
BRK [0x2f9524000, 0x2f9524fff] PGTABLE
BRK [0x2f9525000, 0x2f9525fff] PGTABLE
BRK [0x2f9526000, 0x2f9526fff] PGTABLE
BRK [0x2f9527000, 0x2f9527fff] PGTABLE
BRK [0x2f9528000, 0x2f9528fff] PGTABLE
BRK [0x2f9529000, 0x2f9529fff] PGTABLE
BRK [0x2f952a000, 0x2f952afff] PGTABLE
BRK [0x2f952b000, 0x2f952bfff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x34125000-0x36089fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007A53D000 000024 (v02 DELL )
ACPI: XSDT 0x000000007A53D0C8 000114 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x000000007A5627E8 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x000000007A53D270 025576 (v02 DELL CBX3 01072009 INTL 20160422)
ACPI: FACS 0x000000007AC16180 000040
ACPI: APIC 0x000000007A5628F8 0000BC (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x000000007A5629B8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FIDT 0x000000007A562A00 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x000000007A562AB0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: HPET 0x000000007A562AF0 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
ACPI: SSDT 0x000000007A562B28 000359 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: BOOT 0x000000007A562E88 000028 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: SSDT 0x000000007A562EB0 0012CF (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: HPET 0x000000007A564180 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000007A5641B8 000D84 (v02 INTEL xh_rvp07 00000000 INTL 20160422)
ACPI: UEFI 0x000000007A564F40 000042 (v01 00000000 00000000)
ACPI: SSDT 0x000000007A564F88 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000007A565E68 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F)
ACPI: WSMT 0x000000007A565F00 000028 (v01 DELL CBX3 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000007A565F28 000161 (v02 INTEL HdaDsp 00000000 INTL 20160422)
ACPI: SSDT 0x000000007A566090 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000007A566330 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x000000007A569338 0000DB (v02 INTEL TbtTypeC 00000000 INTL 20160422)
ACPI: DBGP 0x000000007A569418 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000007A569450 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: SSDT 0x000000007A5694A8 0007AC (v02 INTEL UsbCTabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000007A569C58 0084F1 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
ACPI: MSDM 0x000000007A572150 000055 (v03 DELL CBX3 06222004 AMI 00010013)
ACPI: SLIC 0x000000007A5721A8 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: NHLT 0x000000007A572320 00002D (v00 INTEL EDK2 00000002 01000013)
ACPI: BGRT 0x000000007A572350 000038 (v00 01072009 AMI 00010013)
ACPI: TPM2 0x000000007A572388 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
ACPI: ASF! 0x000000007A5723C0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: DMAR 0x000000007A572460 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000047e7fffff]
NODE_DATA(0) allocated [mem 0x47e7d5000-0x47e7fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000047e7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x0000000069142fff]
node 0: [mem 0x0000000069145000-0x000000007a172fff]
node 0: [mem 0x000000007b5ff000-0x000000007b5fffff]
node 0: [mem 0x0000000100000000-0x000000047e7fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000047e7fffff]
On node 0 totalpages: 4163854
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 7750 pages used for memmap
DMA32 zone: 495986 pages, LIFO batch:31
Normal zone: 57248 pages used for memmap
Normal zone: 3663872 pages, LIFO batch:31
Reserving Intel graphics memory at 0x000000007d800000-0x000000007f7fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: Registered nosave memory: [mem 0x69143000-0x69143fff]
PM: Registered nosave memory: [mem 0x69144000-0x69144fff]
PM: Registered nosave memory: [mem 0x7a173000-0x7a52ffff]
PM: Registered nosave memory: [mem 0x7a530000-0x7a573fff]
PM: Registered nosave memory: [mem 0x7a574000-0x7ac18fff]
PM: Registered nosave memory: [mem 0x7ac19000-0x7b51ffff]
PM: Registered nosave memory: [mem 0x7b520000-0x7b5fefff]
PM: Registered nosave memory: [mem 0x7b600000-0x7f7fffff]
PM: Registered nosave memory: [mem 0x7f800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x7f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 39 pages/cpu @ffff9df83e400000 s119704 r8192 d31848 u262144
pcpu-alloc: s119704 r8192 d31848 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4098770
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16227904K/16655416K available (9281K kernel code, 2477K rwdata, 3992K rodata, 2324K init, 2384K bss, 427512K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 37719 entries in 148 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 2000.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3984.00 BogoMIPS (lpj=7968000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 11 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000007a24b000 end: 0x0000007a26afff
DMAR: RMRR base: 0x0000007d000000 end: 0x0000007f7fffff
DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR: DRHD: handling fault status reg 2
DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0 [fault reason 37] Blocked a compatibility format interrupt request
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xa)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (31872.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x69143000-0x69143fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7a574000-0x7ac18fff] (6967296 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 17:09:23, date: 11/16/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x47 set to 0x80
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 34 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9DF82B496800 0005CD (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9DF82B7F5C00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9DF82B541000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9DF82B0B7C00 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: GPE 0x61 active on init
ACPI: Enabled 8 GPEs in block 00 to 7F
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x7f800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:5914] type 00 class 0x060000
pci 0000:00:02.0: [8086:5917] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xdc420000-0xdc427fff 64bit]
pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdc410000-0xdc41ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdc434000-0xdc434fff 64bit]
pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xdc433000-0xdc433fff 64bit]
pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0xdc432000-0xdc432fff 64bit]
pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdc431000-0xdc431fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdc42c000-0xdc42ffff]
pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
pci 0000:00:1f.3: reg 0x10: [mem 0xdc428000-0xdc42bfff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdc400000-0xdc40ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdc430000-0xdc4300ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1c.0: PCI bridge to [bus 01-39]
pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
pci 0000:3a:00.0: [168c:003e] type 00 class 0x028000
pci 0000:3a:00.0: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit]
pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 3a]
pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
pci 0000:3b:00.0: [10ec:525a] type 00 class 0xff0000
pci 0000:3b:00.0: reg 0x14: [mem 0xdc300000-0xdc300fff]
pci 0000:3b:00.0: supports D1 D2
pci 0000:3b:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 3b]
pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff]
pci 0000:3c:00.0: [1179:0116] type 00 class 0x010802
pci 0000:3c:00.0: reg 0x10: [mem 0xdc200000-0xdc203fff 64bit]
pci 0000:00:1d.0: PCI bridge to [bus 3c]
pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x69143000-0x6bffffff]
e820: reserve RAM buffer [mem 0x7a173000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b600000-0x7bffffff]
e820: reserve RAM buffer [mem 0x47e800000-0x47fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs DLL082a PNP0f13 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0xff00-0xfffe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 01-39]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 3a]
pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xdc1fffff]
pci 0000:00:1c.5: PCI bridge to [bus 3b]
pci 0000:00:1c.5: bridge window [mem 0xdc300000-0xdc3fffff]
pci 0000:00:1d.0: PCI bridge to [bus 3c]
pci 0000:00:1d.0: bridge window [mem 0xdc200000-0xdc2fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x7f800000-0xdfffffff window]
pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
pci_bus 0000:3a: resource 1 [mem 0xdc000000-0xdc1fffff]
pci_bus 0000:3b: resource 1 [mem 0xdc300000-0xdc3fffff]
pci_bus 0000:3c: resource 1 [mem 0xdc200000-0xdc2fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 32148K
DMAR: ACPI device "device:79" under DMAR at fed91000 as 00:15.0
DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.1
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x737cd000-0x777cd000] (64MB) mapped at [ffff9df4337cd000-ffff9df4377ccfff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d519840e, max_idle_ns: 881590569543 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1510852167.282:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: AER enabled with IRQ 122
pcieport 0000:00:1c.4: AER enabled with IRQ 123
pcieport 0000:00:1c.5: AER enabled with IRQ 124
pcieport 0000:00:1d.0: AER enabled with IRQ 125
efifb: probing for efifb
efifb: framebuffer at 0x90000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x8E
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (25 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
ACPI: Battery Slot [BAT0] (battery present)
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4)
clocksource: Switched to clocksource tsc
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.0-16-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.0-16-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb: port power management may be unreliable
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002)
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x806ea, pf=0x80, revision=0x70
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (5333862386, 0)->(5340186963, -6324577)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 04409fd30ffab3ce9d2178c508b3c866d61d9a62'
Loaded UEFI:db cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7' linked to secondary sys keyring
Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
usb 1-3: new full-speed USB device number 2 using xhci_hcd
evm: HMAC attrs: 0x1
Magic number: 9:652:188
acpi device:47: hash matches
acpi device:1a: hash matches
rtc_cmos 00:01: setting system clock to 2017-11-16 17:09:29 UTC (1510852169)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2324K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 948K
Freeing unused kernel memory: 104K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
hidraw: raw HID events driver (C) Jiri Kosina
wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
rtsx_pci 0000:3b:00.0: enabling device (0000 -> 0002)
nvme nvme0: pci function 0000:3c:00.0
[drm] Memory usable by graphics device = 4096M
checking generic (90000000 7f0000) vs hw (90000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
fbcon: inteldrmfb (fb0) is primary device
usb 1-3: New USB device found, idVendor=0cf3, idProduct=e300
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=0781, idProduct=5580
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Extreme
usb 2-1: Manufacturer: SanDisk
usb 2-1: SerialNumber: AA011105141538341521
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
nvme0n1: p1
usb 1-5: new high-speed USB device number 3 using xhci_hcd
usb 1-5: New USB device found, idVendor=0c45, idProduct=670c
usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-5: Product: Integrated_Webcam_HD
usb 1-5: Manufacturer: CN09GTFMLOG0077KB6L7A01
psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734]
psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..]
psmouse serio1: synaptics: Your touchpad (PNP: DLL082a PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00323/0x840300/0x12e800/0x0, board id: 3038, fw id: 2375007
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[drm] RC6 on
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
scsi 0:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice System Slice.
systemd[1]: Starting Uncomplicated firewall...
systemd-journald[932]: Received request to flush runtime journal from PID 1
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
input: Intel HID events as /devices/platform/INT33D5:00/input/input8
intel-hid INT33D5:00: platform supports 5 button array
input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input9
input: Intel Virtual Button driver as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input10
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
idma64 idma64.0: Found Intel integrated DMA 64-bit
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
usbcore: registered new interface driver btusb
dell_wmi: Detected Dell WMI interface version 1
input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input11
i2c_hid i2c-DLL082A:01: i2c-DLL082A:01 supply vdd not found, using dummy regulator
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
media: Linux media interface: v0.10
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Linux video capture interface: v2.00
Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
input: DLL082A:01 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-DLL082A:01/0018:06CB:76AF.0001/input/input13
hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL082A:01 06CB:76AF] on i2c-DLL082A:01
uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input18
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
ath10k_pci 0000:3a:00.0: enabling device (0000 -> 0002)
ath10k_pci 0000:3a:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
ath10k_pci 0000:3a:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535
ath10k_pci 0000:3a:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.4.4-00022-QCARMSWPZ-2 api 6 features wowlan,ignore-otp crc32 4d458559
ath10k_pci 0000:3a:00.0: board_file api 2 bmi_id N/A crc32 07ee144e
ath10k_pci 0000:3a:00.0: Unknown eventid: 90118
ath10k_pci 0000:3a:00.0: htt-ver 3.32 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
ath10k_pci 0000:3a:00.0 wlp58s0: renamed from wlan0
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
ath10k_pci 0000:3a:00.0: Unknown eventid: 90118
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
ACPI Error: [SPRT] Namespace lookup failure, AE_ALREADY_EXISTS (20170531/dswload2-346)
ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20170531/psobject-252)
ACPI Error: Method parse/execution failed \_GPE.XTBT, AE_ALREADY_EXISTS (20170531/psparse-550)
ACPI Error: Method parse/execution failed \_GPE.XTBT, AE_ALREADY_EXISTS (20170531/psparse-550)
ACPI Error: Method parse/execution failed \_GPE._E42, AE_ALREADY_EXISTS (20170531/psparse-550)
ACPI: Marking method _E42 as Serialized because of AE_ALREADY_EXISTS error
ACPI Exception: AE_ALREADY_EXISTS, while evaluating GPE method [_E42] (20170531/evgpe-646)
pci 0000:01:00.0: [8086:1576] type 01 class 0x060400
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: [8086:1576] type 01 class 0x060400
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: [8086:1576] type 01 class 0x060400
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:02.0: [8086:1576] type 01 class 0x060400
pci 0000:02:02.0: supports D1 D2
pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-39]
pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
pci 0000:03:00.0: [8086:1575] type 00 class 0x088000
pci 0000:03:00.0: reg 0x10: [mem 0xda000000-0xda03ffff]
pci 0000:03:00.0: reg 0x14: [mem 0xda040000-0xda040fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
pci 0000:02:01.0: PCI bridge to [bus 04-38]
pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
pci 0000:39:00.0: [8086:15b5] type 00 class 0x0c0330
pci 0000:39:00.0: reg 0x10: [mem 0xd9f00000-0xd9f0ffff]
pci 0000:39:00.0: supports D1 D2
pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:02.0: PCI bridge to [bus 39]
pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
pci_bus 0000:02: Allocating resources
pci 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
pci 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
pci 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
pci 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
pci 0000:01:00.0: BAR 13: no space for [io size 0x2000]
pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
pci 0000:01:00.0: BAR 13: no space for [io size 0x2000]
pci 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:02:01.0: BAR 13: no space for [io size 0x1000]
pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:02:02.0: BAR 13: no space for [io size 0x1000]
pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:02:02.0: BAR 13: no space for [io size 0x1000]
pci 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:02:01.0: BAR 13: no space for [io size 0x1000]
pci 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0xda000000-0xda0fffff]
pci 0000:02:01.0: PCI bridge to [bus 04-38]
pci 0000:02:01.0: bridge window [mem 0xc4000000-0xd9efffff]
pci 0000:02:01.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
pci 0000:02:02.0: PCI bridge to [bus 39]
pci 0000:02:02.0: bridge window [mem 0xd9f00000-0xd9ffffff]
pci 0000:01:00.0: PCI bridge to [bus 02-39]
pci 0000:01:00.0: bridge window [mem 0xc4000000-0xda0fffff]
pci 0000:01:00.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
xhci_hcd 0000:39:00.0: xHCI Host Controller
xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x00009810
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.13.0-16-generic xhci-hcd
usb usb3: SerialNumber: 0000:39:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:39:00.0: xHCI Host Controller
xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.13.0-16-generic xhci-hcd
usb usb4: SerialNumber: 0000:39:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
thunderbolt 0000:03:00.0: NHI initialized, starting thunderbolt
thunderbolt 0000:03:00.0: allocating TX ring 0 of size 10
thunderbolt 0000:03:00.0: allocating RX ring 0 of size 10
thunderbolt 0000:03:00.0: control channel created
thunderbolt 0000:03:00.0: control channel starting...
thunderbolt 0000:03:00.0: starting TX ring 0
thunderbolt 0000:03:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
thunderbolt 0000:03:00.0: starting RX ring 0
thunderbolt 0000:03:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
thunderbolt 0000:03:00.0: current switch config:
thunderbolt 0000:03:00.0: Switch: 8086:1576 (Revision: 4, TB Version: 2)
thunderbolt 0000:03:00.0: Max Port Number: 11
thunderbolt 0000:03:00.0: Config:
thunderbolt 0000:03:00.0: Upstream Port Number: 5 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 254ms
thunderbolt 0000:03:00.0: unknown1: 0x0 unknown4: 0x0
thunderbolt 0000:03:00.0: 0: uid: 0xd45f3094b92600
thunderbolt 0000:03:00.0: Port 0: 8086:1576 (Revision: 4, TB Version: 1, Type: Port (0x1))
thunderbolt 0000:03:00.0: Max hop id (in/out): 7/7
thunderbolt 0000:03:00.0: Max counters: 8
thunderbolt 0000:03:00.0: NFC Credits: 0x800000
thunderbolt 0000:03:00.0: Port 1: 8086:1576 (Revision: 4, TB Version: 1, Type: Port (0x1))
thunderbolt 0000:03:00.0: Max hop id (in/out): 15/15
thunderbolt 0000:03:00.0: Max counters: 16
thunderbolt 0000:03:00.0: NFC Credits: 0x3c00000
thunderbolt 0000:03:00.0: Port 2: 8086:1576 (Revision: 4, TB Version: 1, Type: Port (0x1))
thunderbolt 0000:03:00.0: Max hop id (in/out): 15/15
thunderbolt 0000:03:00.0: Max counters: 16
thunderbolt 0000:03:00.0: NFC Credits: 0x3c00000
thunderbolt 0000:03:00.0: 0:3: disabled by eeprom
thunderbolt 0000:03:00.0: 0:4: disabled by eeprom
thunderbolt 0000:03:00.0: 0:5: disabled by eeprom
thunderbolt 0000:03:00.0: Port 6: 8086:1576 (Revision: 4, TB Version: 1, Type: PCIe (0x100101))
thunderbolt 0000:03:00.0: Max hop id (in/out): 8/8
thunderbolt 0000:03:00.0: Max counters: 2
thunderbolt 0000:03:00.0: NFC Credits: 0x800000
thunderbolt 0000:03:00.0: Port 7: 8086:1576 (Revision: 4, TB Version: 1, Type: PCIe (0x100101))
thunderbolt 0000:03:00.0: Max hop id (in/out): 8/8
thunderbolt 0000:03:00.0: Max counters: 2
thunderbolt 0000:03:00.0: NFC Credits: 0x800000
thunderbolt 0000:03:00.0: 0:8: disabled by eeprom
thunderbolt 0000:03:00.0: Port 9: 8086:1576 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0101))
thunderbolt 0000:03:00.0: Max hop id (in/out): 9/9
thunderbolt 0000:03:00.0: Max counters: 2
thunderbolt 0000:03:00.0: NFC Credits: 0x1000000
thunderbolt 0000:03:00.0: Port 10: 8086:1576 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0101))
thunderbolt 0000:03:00.0: Max hop id (in/out): 9/9
thunderbolt 0000:03:00.0: Max counters: 2
thunderbolt 0000:03:00.0: NFC Credits: 0x1000000
thunderbolt 0000:03:00.0: 0:b: disabled by eeprom
xhci_hcd 0000:39:00.0: remove, state 1
usb usb4: USB disconnect, device number 1
xhci_hcd 0000:39:00.0: USB bus 4 deregistered
xhci_hcd 0000:39:00.0: xHCI host controller not responding, assume dead
xhci_hcd 0000:39:00.0: remove, state 1
usb usb3: USB disconnect, device number 1
xhci_hcd 0000:39:00.0: Host halt failed, -19
xhci_hcd 0000:39:00.0: Host not accessible, reset failed.
xhci_hcd 0000:39:00.0: USB bus 3 deregistered
thunderbolt 0000:03:00.0: stopping RX ring 0
thunderbolt 0000:03:00.0: disabling interrupt at register 0x38200 bit 12 (0xffffffff -> 0xffffefff)
thunderbolt 0000:03:00.0: stopping TX ring 0
thunderbolt 0000:03:00.0: disabling interrupt at register 0x38200 bit 0 (0xffffffff -> 0xfffffffe)
thunderbolt 0000:03:00.0: control channel stopped
thunderbolt 0000:03:00.0: freeing RX ring 0
thunderbolt 0000:03:00.0: freeing TX ring 0
thunderbolt 0000:03:00.0: shutdown
pci_bus 0000:02: Allocating resources
pcieport 0000:02:01.0: bridge window [io 0x1000-0x0fff] to [bus 04-38] add_size 1000
pcieport 0000:02:02.0: bridge window [io 0x1000-0x0fff] to [bus 39] add_size 1000
pcieport 0000:02:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
pcieport 0000:01:00.0: bridge window [io 0x1000-0x0fff] to [bus 02-39] add_size 2000
pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000]
pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
pcieport 0000:01:00.0: BAR 13: no space for [io size 0x2000]
pcieport 0000:01:00.0: BAR 13: failed to assign [io size 0x2000]
pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:02:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pcieport 0000:02:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pcieport 0000:02:02.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:02:02.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:02:01.0: BAR 13: no space for [io size 0x1000]
pcieport 0000:02:01.0: BAR 13: failed to assign [io size 0x1000]
pcieport 0000:00:1c.0: AER: Corrected error received: id=00e0
pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e0(Receiver ID)
pcieport 0000:00:1c.0: device [8086:9d10] error status/mask=00000001/00002000
pcieport 0000:00:1c.0: [ 0] Receiver Error (First)
pcieport 0000:02:00.0: Refused to change power state, currently in D3
pci_bus 0000:03: busn_res: [bus 03] is released
pci_bus 0000:04: busn_res: [bus 04-38] is released
pci_bus 0000:39: busn_res: [bus 39] is released
pci_bus 0000:02: busn_res: [bus 02-39] is released
wlp58s0: authenticate with d4:ca:6d:a2:7f:8c
wlp58s0: send auth to d4:ca:6d:a2:7f:8c (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with d4:ca:6d:a2:7f:8c (try 1/3)
wlp58s0: RX AssocResp from d4:ca:6d:a2:7f:8c (capab=0x431 status=0 aid=1)
wlp58s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
pcieport 0000:00:1c.4: AER: Corrected error received: id=00e4
pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e4(Transmitter ID)
pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00001000/00002000
pcieport 0000:00:1c.4: [12] Replay Timer Timeout
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
wlp58s0: deauthenticating from d4:ca:6d:a2:7f:8c by local choice (Reason: 3=DEAUTH_LEAVING)
ath10k_pci 0000:3a:00.0: Unknown eventid: 90118
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
wlp58s0: authenticate with d4:ca:6d:a2:7f:8c
wlp58s0: send auth to d4:ca:6d:a2:7f:8c (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with d4:ca:6d:a2:7f:8c (try 1/3)
wlp58s0: RX AssocResp from d4:ca:6d:a2:7f:8c (capab=0x431 status=0 aid=1)
wlp58s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
pcieport 0000:00:1c.4: AER: Corrected error received: id=00e4
pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e4(Transmitter ID)
pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00001000/00002000
pcieport 0000:00:1c.4: [12] Replay Timer Timeout
pcieport 0000:00:1c.4: AER: Corrected error received: id=00e4
pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e4(Transmitter ID)
pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00001000/00002000
pcieport 0000:00:1c.4: [12] Replay Timer Timeout
CPU5: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU5: Core temperature/speed normal
CPU1: Core temperature/speed normal
CPU5: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU6: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU2: Package temperature/speed normal
wlp58s0: deauthenticating from d4:ca:6d:a2:7f:8c by local choice (Reason: 3=DEAUTH_LEAVING)
ath10k_pci 0000:3a:00.0: Unknown eventid: 90118
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp58s0: link is not ready
wlp58s0: authenticate with d4:ca:6d:a2:7f:8c
wlp58s0: send auth to d4:ca:6d:a2:7f:8c (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with d4:ca:6d:a2:7f:8c (try 1/3)
wlp58s0: RX AssocResp from d4:ca:6d:a2:7f:8c (capab=0x431 status=0 aid=2)
wlp58s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp58s0: link becomes ready
pcieport 0000:00:1c.4: AER: Corrected error received: id=00e4
pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e4(Transmitter ID)
pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00001000/00002000
pcieport 0000:00:1c.4: [12] Replay Timer Timeout
pcieport 0000:00:1c.4: AER: Corrected error received: id=00e4
pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e4(Transmitter ID)
pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00001000/00002000
pcieport 0000:00:1c.4: [12] Replay Timer Timeout
pcieport 0000:00:1c.4: AER: Corrected error received: id=00e4
pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e4(Transmitter ID)
pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00001000/00002000
pcieport 0000:00:1c.4: [12] Replay Timer Timeout
pcieport 0000:00:1c.4: AER: Corrected error received: id=00e4
pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e4(Transmitter ID)
pcieport 0000:00:1c.4: device [8086:9d14] error status/mask=00001000/00002000
pcieport 0000:00:1c.4: [12] Replay Timer Timeout
wlp58s0: Connection to AP d4:ca:6d:a2:7f:8c lost
ath10k_pci 0000:3a:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
wlp58s0: authenticate with d4:ca:6d:a2:7f:8c
wlp58s0: send auth to d4:ca:6d:a2:7f:8c (try 1/3)
wlp58s0: authenticated
wlp58s0: associate with d4:ca:6d:a2:7f:8c (try 1/3)
wlp58s0: RX AssocResp from d4:ca:6d:a2:7f:8c (capab=0x431 status=0 aid=1)
wlp58s0: associated