dmesg - glmark2-1.1.0_test_01

Return To glmark2-1.1.0_test_01 System Information

random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
Linux version 4.13.11-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Thu Nov 2 10:25:56 CET 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000ad73cfff] usable
BIOS-e820: [mem 0x00000000ad73d000-0x00000000add3dfff] ACPI NVS
BIOS-e820: [mem 0x00000000add3e000-0x00000000add40fff] type 20
BIOS-e820: [mem 0x00000000add41000-0x00000000add57fff] usable
BIOS-e820: [mem 0x00000000add58000-0x00000000add5dfff] type 20
BIOS-e820: [mem 0x00000000add5e000-0x00000000add5ffff] usable
BIOS-e820: [mem 0x00000000add60000-0x00000000add6dfff] type 20
BIOS-e820: [mem 0x00000000add6e000-0x00000000adf04fff] usable
BIOS-e820: [mem 0x00000000adf05000-0x00000000adf08fff] type 20
BIOS-e820: [mem 0x00000000adf09000-0x00000000adf51fff] usable
BIOS-e820: [mem 0x00000000adf52000-0x00000000adf58fff] type 20
BIOS-e820: [mem 0x00000000adf59000-0x00000000adf5afff] usable
BIOS-e820: [mem 0x00000000adf5b000-0x00000000adf67fff] reserved
BIOS-e820: [mem 0x00000000adf68000-0x00000000adf79fff] type 20
BIOS-e820: [mem 0x00000000adf7a000-0x00000000adf7cfff] usable
BIOS-e820: [mem 0x00000000adf7d000-0x00000000adf7efff] type 20
BIOS-e820: [mem 0x00000000adf7f000-0x00000000adf95fff] usable
BIOS-e820: [mem 0x00000000adf96000-0x00000000adf9bfff] type 20
BIOS-e820: [mem 0x00000000adf9c000-0x00000000adfa3fff] usable
BIOS-e820: [mem 0x00000000adfa4000-0x00000000adfa4fff] type 20
BIOS-e820: [mem 0x00000000adfa5000-0x00000000adfb3fff] usable
BIOS-e820: [mem 0x00000000adfb4000-0x00000000adfb4fff] type 20
BIOS-e820: [mem 0x00000000adfb5000-0x00000000adfbffff] usable
BIOS-e820: [mem 0x00000000adfc0000-0x00000000adfc4fff] type 20
BIOS-e820: [mem 0x00000000adfc5000-0x00000000adfe3fff] usable
BIOS-e820: [mem 0x00000000adfe4000-0x00000000adfe5fff] type 20
BIOS-e820: [mem 0x00000000adfe6000-0x00000000adff2fff] usable
BIOS-e820: [mem 0x00000000adff3000-0x00000000adff3fff] type 20
BIOS-e820: [mem 0x00000000adff4000-0x00000000ae005fff] usable
BIOS-e820: [mem 0x00000000ae006000-0x00000000ae02cfff] type 20
BIOS-e820: [mem 0x00000000ae02d000-0x00000000ae040fff] usable
BIOS-e820: [mem 0x00000000ae041000-0x00000000ae041fff] type 20
BIOS-e820: [mem 0x00000000ae042000-0x00000000ae042fff] usable
BIOS-e820: [mem 0x00000000ae043000-0x00000000ae044fff] type 20
BIOS-e820: [mem 0x00000000ae045000-0x00000000ae045fff] usable
BIOS-e820: [mem 0x00000000ae046000-0x00000000ae04afff] type 20
BIOS-e820: [mem 0x00000000ae04b000-0x00000000ae061fff] usable
BIOS-e820: [mem 0x00000000ae062000-0x00000000ae0c1fff] reserved
BIOS-e820: [mem 0x00000000ae0c2000-0x00000000ae0dcfff] type 20
BIOS-e820: [mem 0x00000000ae0dd000-0x00000000ae606fff] reserved
BIOS-e820: [mem 0x00000000ae607000-0x00000000ae886fff] ACPI NVS
BIOS-e820: [mem 0x00000000ae887000-0x00000000ae88bfff] ACPI data
BIOS-e820: [mem 0x00000000ae88c000-0x00000000ae88cfff] usable
BIOS-e820: [mem 0x00000000ae88d000-0x00000000ae8cffff] ACPI NVS
BIOS-e820: [mem 0x00000000ae8d0000-0x00000000aecdffff] usable
BIOS-e820: [mem 0x00000000aece0000-0x00000000aeff3fff] reserved
BIOS-e820: [mem 0x00000000aeff4000-0x00000000aeffffff] usable
BIOS-e820: [mem 0x00000000afc00000-0x00000000cfdfffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022f1fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi:  ACPI=0xae857000  ACPI 2.0=0xae857000  SMBIOS=0xf04c0  MPS=0xfd4d0 
random: fast init done
SMBIOS 2.7 present.
DMI: ASUSTeK COMPUTER INC. K46CB/K46CB, BIOS K46CB.205 03/29/2013
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x22f200 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D3FFF write-protect
  D4000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask E00000000 write-back
  1 base 200000000 mask FE0000000 write-back
  2 base 220000000 mask FF0000000 write-back
  3 base 0C0000000 mask FC0000000 uncachable
  4 base 0B0000000 mask FF0000000 uncachable
  5 base 0AFC00000 mask FFFC00000 uncachable
  6 base 22F800000 mask FFF800000 uncachable
  7 base 22F400000 mask FFFC00000 uncachable
  8 base 22F200000 mask FFFE00000 uncachable
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: update [mem 0xafc00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xaf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffffa0e7400fd7f0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffffa0e740097000] 97000 size 24576
BRK [0x7dd64000, 0x7dd64fff] PGTABLE
BRK [0x7dd65000, 0x7dd65fff] PGTABLE
BRK [0x7dd66000, 0x7dd66fff] PGTABLE
BRK [0x7dd67000, 0x7dd67fff] PGTABLE
BRK [0x7dd68000, 0x7dd68fff] PGTABLE
BRK [0x7dd69000, 0x7dd69fff] PGTABLE
BRK [0x7dd6a000, 0x7dd6afff] PGTABLE
BRK [0x7dd6b000, 0x7dd6bfff] PGTABLE
BRK [0x7dd6c000, 0x7dd6cfff] PGTABLE
BRK [0x7dd6d000, 0x7dd6dfff] PGTABLE
BRK [0x7dd6e000, 0x7dd6efff] PGTABLE
BRK [0x7dd6f000, 0x7dd6ffff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x372c1000-0x37957fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000AE857000 000024 (v02 _ASUS_)
ACPI: XSDT 0x00000000AE857090 0000A4 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: FACP 0x00000000AE86A6E0 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: DSDT 0x00000000AE8571C0 013520 (v02 _ASUS_ Notebook 00000013 INTL 20091112)
ACPI: FACS 0x00000000AE884080 000040
ACPI: APIC 0x00000000AE86A7F0 000072 (v03 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: FPDT 0x00000000AE86A868 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
ACPI: ECDT 0x00000000AE86A8B0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: MCFG 0x00000000AE86A978 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
ACPI: SSDT 0x00000000AE86A9B8 000A3C (v01 DptfTa DptfTab  00001000 INTL 20091112)
ACPI: SSDT 0x00000000AE86B3F8 000CA5 (v01 SADptf SADptf_  00001000 INTL 20091112)
ACPI: SSDT 0x00000000AE86C0A0 000098 (v01 PchDpt PchDptf  00001000 INTL 20091112)
ACPI: SSDT 0x00000000AE86C138 00091C (v01 CfgTDP CfgTDP_  00001000 INTL 20091112)
ACPI: HPET 0x00000000AE86CA58 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000AE86CA90 00066E (v01 AhciR1 AhciTab1 00001000 INTL 20091112)
ACPI: SSDT 0x00000000AE86D100 00049E (v01 AhciR2 AhciTab2 00001000 INTL 20091112)
ACPI: SSDT 0x00000000AE86D5A0 0008C8 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
ACPI: SSDT 0x00000000AE86DE68 000B18 (v01 PmRef  CpuPm    00003000 INTL 20051117)
ACPI: DMAR 0x00000000AE86E980 0000B8 (v01 INTEL  SNB      00000001 INTL 00000001)
ACPI: MSDM 0x00000000AE606E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022f1fffff]
NODE_DATA(0) allocated [mem 0x22f1f4000-0x22f1f8fff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000022f1fffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x000000001fffffff]
  node   0: [mem 0x0000000020200000-0x0000000040003fff]
  node   0: [mem 0x0000000040005000-0x00000000ad73cfff]
  node   0: [mem 0x00000000add41000-0x00000000add57fff]
  node   0: [mem 0x00000000add5e000-0x00000000add5ffff]
  node   0: [mem 0x00000000add6e000-0x00000000adf04fff]
  node   0: [mem 0x00000000adf09000-0x00000000adf51fff]
  node   0: [mem 0x00000000adf59000-0x00000000adf5afff]
  node   0: [mem 0x00000000adf7a000-0x00000000adf7cfff]
  node   0: [mem 0x00000000adf7f000-0x00000000adf95fff]
  node   0: [mem 0x00000000adf9c000-0x00000000adfa3fff]
  node   0: [mem 0x00000000adfa5000-0x00000000adfb3fff]
  node   0: [mem 0x00000000adfb5000-0x00000000adfbffff]
  node   0: [mem 0x00000000adfc5000-0x00000000adfe3fff]
  node   0: [mem 0x00000000adfe6000-0x00000000adff2fff]
  node   0: [mem 0x00000000adff4000-0x00000000ae005fff]
  node   0: [mem 0x00000000ae02d000-0x00000000ae040fff]
  node   0: [mem 0x00000000ae042000-0x00000000ae042fff]
  node   0: [mem 0x00000000ae045000-0x00000000ae045fff]
  node   0: [mem 0x00000000ae04b000-0x00000000ae061fff]
  node   0: [mem 0x00000000ae88c000-0x00000000ae88cfff]
  node   0: [mem 0x00000000ae8d0000-0x00000000aecdffff]
  node   0: [mem 0x00000000aeff4000-0x00000000aeffffff]
  node   0: [mem 0x0000000100000000-0x000000022f1fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000022f1fffff]
On node 0 totalpages: 1953177
  DMA zone: 64 pages used for memmap
  DMA zone: 27 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 11056 pages used for memmap
  DMA32 zone: 707579 pages, LIFO batch:31
  Normal zone: 19400 pages used for memmap
  Normal zone: 1241600 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000afe00000-0x00000000cfdfffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0xad73d000-0xadd3dfff]
PM: Registered nosave memory: [mem 0xadd3e000-0xadd40fff]
PM: Registered nosave memory: [mem 0xadd58000-0xadd5dfff]
PM: Registered nosave memory: [mem 0xadd60000-0xadd6dfff]
PM: Registered nosave memory: [mem 0xadf05000-0xadf08fff]
PM: Registered nosave memory: [mem 0xadf52000-0xadf58fff]
PM: Registered nosave memory: [mem 0xadf5b000-0xadf67fff]
PM: Registered nosave memory: [mem 0xadf68000-0xadf79fff]
PM: Registered nosave memory: [mem 0xadf7d000-0xadf7efff]
PM: Registered nosave memory: [mem 0xadf96000-0xadf9bfff]
PM: Registered nosave memory: [mem 0xadfa4000-0xadfa4fff]
PM: Registered nosave memory: [mem 0xadfb4000-0xadfb4fff]
PM: Registered nosave memory: [mem 0xadfc0000-0xadfc4fff]
PM: Registered nosave memory: [mem 0xadfe4000-0xadfe5fff]
PM: Registered nosave memory: [mem 0xadff3000-0xadff3fff]
PM: Registered nosave memory: [mem 0xae006000-0xae02cfff]
PM: Registered nosave memory: [mem 0xae041000-0xae041fff]
PM: Registered nosave memory: [mem 0xae043000-0xae044fff]
PM: Registered nosave memory: [mem 0xae046000-0xae04afff]
PM: Registered nosave memory: [mem 0xae062000-0xae0c1fff]
PM: Registered nosave memory: [mem 0xae0c2000-0xae0dcfff]
PM: Registered nosave memory: [mem 0xae0dd000-0xae606fff]
PM: Registered nosave memory: [mem 0xae607000-0xae886fff]
PM: Registered nosave memory: [mem 0xae887000-0xae88bfff]
PM: Registered nosave memory: [mem 0xae88d000-0xae8cffff]
PM: Registered nosave memory: [mem 0xaece0000-0xaeff3fff]
PM: Registered nosave memory: [mem 0xaf000000-0xafbfffff]
PM: Registered nosave memory: [mem 0xafc00000-0xcfdfffff]
PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffffa0e96ee00000 s106520 r8192 d32744 u524288
pcpu-alloc: s106520 r8192 d32744 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1922630
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7422236K/7812708K available (6644K kernel code, 1134K rwdata, 2048K rodata, 1336K init, 908K bss, 390472K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 28354 entries in 111 pages
Preemptible hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
	Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 8448, nr_irqs: 456, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1795.908 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3593.47 BogoMIPS (lpj=5986360)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 9 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 24K
smpboot: Max logical packages: 2
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x000000ae59e000 end: 0x000000ae5aafff
DMAR: RMRR base: 0x000000afc00000 end: 0x000000cfdfffff
DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (14378.55 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xad73d000-0xadd3dfff] (6295552 bytes)
PM: Registering ACPI NVS region [mem 0xae607000-0xae886fff] (2621440 bytes)
PM: Registering ACPI NVS region [mem 0xae88d000-0xae8cffff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 17:27:03, date: 11/04/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \: Used as first EC
ACPI: \: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \: Used as boot ECDT EC to handle transactions
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI Error: Needed type [Reference], found [Integer] ffffa0e965bf1948 (20170531/exresop-103)
ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170531/dswexec-461)
ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20170531/psparse-550)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA0E965BFEC00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA0E965477400 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xfed98000-0xfed9ffff 64bit]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7a22000-0xf7a2200f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7a20000-0xf7a203ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7a18000-0xf7a1bfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1f000-0xf7a1f3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1e000-0xf7a1e7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7a1d000-0xf7a1d0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
pci 0000:01:00.0: [10de:0fdf] type 00 class 0x030200
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:04:00.0: [10ec:5289] type 00 class 0xff0000
pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf780ffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.2: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.2: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:04:00.2: reg 0x18: [mem 0xf2104000-0xf2104fff 64bit pref]
pci 0000:04:00.2: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:04:00.2: supports D1 D2
pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]
pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: EC: EC stopped
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot ECDT EC to handle transactions and events
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x19, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:04.0: can't claim BAR 0 [mem 0xfed98000-0xfed9ffff 64bit]: no compatible bridge window
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xad73d000-0xafffffff]
e820: reserve RAM buffer [mem 0xadd58000-0xafffffff]
e820: reserve RAM buffer [mem 0xadd60000-0xafffffff]
e820: reserve RAM buffer [mem 0xadf05000-0xafffffff]
e820: reserve RAM buffer [mem 0xadf52000-0xafffffff]
e820: reserve RAM buffer [mem 0xadf5b000-0xafffffff]
e820: reserve RAM buffer [mem 0xadf7d000-0xafffffff]
e820: reserve RAM buffer [mem 0xadf96000-0xafffffff]
e820: reserve RAM buffer [mem 0xadfa4000-0xafffffff]
e820: reserve RAM buffer [mem 0xadfb4000-0xafffffff]
e820: reserve RAM buffer [mem 0xadfc0000-0xafffffff]
e820: reserve RAM buffer [mem 0xadfe4000-0xafffffff]
e820: reserve RAM buffer [mem 0xadff3000-0xafffffff]
e820: reserve RAM buffer [mem 0xae006000-0xafffffff]
e820: reserve RAM buffer [mem 0xae041000-0xafffffff]
e820: reserve RAM buffer [mem 0xae043000-0xafffffff]
e820: reserve RAM buffer [mem 0xae046000-0xafffffff]
e820: reserve RAM buffer [mem 0xae062000-0xafffffff]
e820: reserve RAM buffer [mem 0xae88d000-0xafffffff]
e820: reserve RAM buffer [mem 0xaece0000-0xafffffff]
e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
e820: reserve RAM buffer [mem 0x22f200000-0x22fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x0680-0x069f] has been reserved
system 00:01: [io  0x1000-0x100f] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0x0400-0x0453] has been reserved
system 00:01: [io  0x0458-0x047f] has been reserved
system 00:01: [io  0x0500-0x057f] has been reserved
system 00:01: [io  0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io  0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io  0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xcfe00000-0xcfe00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xcfe00000-0xcfe00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x20000000-0x201fffff] has been reserved
system 00:09: [mem 0x40004000-0x40004fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:04.0: BAR 0: assigned [mem 0xcfe08000-0xcfe0ffff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]
pci 0000:00:1c.3:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xcfe00000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 6748K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9e768000-0xa2768000] (64MB) mapped at [ffffa0e7de768000-ffffa0e7e2767fff]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=40 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
efifb: probing for efifb
efifb: framebuffer at 0xd0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x306a9, pf=0x10, revision=0x15
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1150360547, 0)->(1158792646, -8432099)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
  Magic number: 9:61:491
rtc_cmos 00:02: setting system clock to 2017-11-04 17:27:04 UTC (1509816424)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1536K
i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
SCSI subsystem initialized
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a20000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1f000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7a1e000 port 0xf7a1e100 irq 27
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf7a1e000 port 0xf7a1e200 irq 27
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: supports DRM functions and may not be fully accessible
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: ATAPI: MATSHITADVD-RAM UJ8C2 S, 1.00, max UDMA/133
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: supports DRM functions and may not be fully accessible
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: disabling queued TRIM support
ata3.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
scsi 2:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8C2 S  1.00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] supports TCG Opal
sd 0:0:0:0: [sda] Attached SCSI disk
sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
tsc: Refined TSC clocksource calibration: 1795.920 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e31b7216c, max_idle_ns: 440795249889 ns
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
systemd[1]: Configuration file /etc/systemd/system/reflector.timer is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: Configuration file /etc/systemd/system/reflector.service is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Reached target Paths.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
EXT4-fs (sda3): re-mounted. Opts: data=ordered
systemd-journald[212]: Received request to flush runtime journal from PID 1
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (62 C)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
usb 1-1.3: new high-speed USB device number 4 using ehci-pci
ACPI: AC Adapter [AC0] (on-line)
ACPI: Lid Switch [LID]
input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input6
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
ACPI: Power Button [PWRF]
usbcore: registered new interface driver btusb
usbcore: registered new interface driver ath3k
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000044F (\GPIS) (20170531/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20170531/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20170531/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPIO) (20170531/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Linux agpgart interface v0.103
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.2: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.2 eth0: RTL8411 at 0xffffb01380e11000, 74:d0:2b:b2:48:35, XID 08800800 IRQ 30
r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
input: PC Speaker as /devices/platform/pcspkr/input/input9
Adding 3145724k swap on /dev/sda2.  Priority:-1 extents:1 across:3145724k SSFS
[drm] Memory usable by graphics device = 2048M
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
iTCO_vendor_support: vendor-support=0
asus_wmi: ASUS WMI generic driver loaded
ath: phy0: Disable PLL PowerSave
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
asus_wmi: Initialization: 0x1
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
asus_wmi: BIOS WMI version: 7.9
asus_wmi: SFUN value: 0x4a0877
r8169 0000:04:00.2 enp4s0f2: renamed from eth0
input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input14
[drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input15
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffb01381680000, irq=17
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input16
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
fbcon: inteldrmfb (fb0) is primary device
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC270: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1a/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
asus_wmi: Number of fans: 1
media: Linux media interface: v0.10
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
Linux video capture interface: v2.00
nvidia-nvlink: Nvlink Core is being initialized, major device number 245
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  387.22  Wed Oct 25 23:13:21 PDT 2017 (using threaded interrupts)
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
uvcvideo: Found UVC 1.00 device USB Camera (13d3:5165)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  387.22  Wed Oct 25 22:46:40 PDT 2017
uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
input: USB Camera: USB 2.0 UVC HD Webc as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input19
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
clocksource: Switched to clocksource tsc
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f01)
psmouse serio4: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0c.
psmouse serio4: elantech: Elan sample query result 03, 23, 75
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input13
mousedev: PS/2 mouse device common for all mice
random: crng init done
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with bc:16:f5:da:0a:39
wlp3s0: send auth to bc:16:f5:da:0a:39 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with bc:16:f5:da:0a:39 (try 1/3)
wlp3s0: RX AssocResp from bc:16:f5:da:0a:39 (capab=0x401 status=0 aid=9)
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: associated
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
perf: interrupt took too long (2520 > 2500), lowering kernel.perf_event_max_sample_rate to 79200
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pcieport 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci_bus 0000:03: Allocating resources
pcieport 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci_bus 0000:04: Allocating resources
pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xf2200000-0xf23fffff]
pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xf2400000-0xf25fffff 64bit pref]
pcieport 0000:00:1c.1: BAR 15: assigned [mem 0xf2600000-0xf27fffff 64bit pref]
pcieport 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
pcieport 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from bc:16:f5:da:0a:39 by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 426.928 msecs
PM: late suspend of devices complete after 16.344 msecs
PM: noirq suspend of devices complete after 16.908 msecs
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Suspended for 4623.793 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
 cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
 cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
 cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
PM: noirq resume of devices complete after 17.460 msecs
PM: early resume of devices complete after 0.836 msecs
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
ACPI: EC: event unblocked
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ath: phy0: ASPM enabled: 0x42
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
sd 0:0:0:0: [sda] Starting disk
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
usb 1-1: reset high-speed USB device number 2 using ehci-pci
usb 2-1: reset high-speed USB device number 2 using ehci-pci
usb 1-1.1: reset full-speed USB device number 3 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
PM: resume of devices complete after 1134.003 msecs
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
usb 1-1.1: USB disconnect, device number 3
usb 1-1.1: new full-speed USB device number 5 using ehci-pci
usb 1-1.1: USB disconnect, device number 5
usb 1-1.1: new full-speed USB device number 6 using ehci-pci
wlp3s0: authenticate with 84:80:2d:42:1f:39
wlp3s0: send auth to 84:80:2d:42:1f:39 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 84:80:2d:42:1f:39 (try 1/3)
wlp3s0: RX AssocResp from 84:80:2d:42:1f:39 (capab=0x401 status=0 aid=1)
wlp3s0: associated
usb 1-1.1: device descriptor read/64, error -110
perf: interrupt took too long (3151 > 3150), lowering kernel.perf_event_max_sample_rate to 63300
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
pci_bus 0000:04: Allocating resources
pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xf7a1c000-0xf7a1cfff 64bit]
pci 0000:00:1f.6: BAR 0: assigned [mem 0xcfe01000-0xcfe01fff 64bit]
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from 84:80:2d:42:1f:39 by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 314.617 msecs
PM: late suspend of devices complete after 14.849 msecs
PM: noirq suspend of devices complete after 16.956 msecs
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Suspended for 4249.746 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
 cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
 cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
 cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
PM: noirq resume of devices complete after 17.860 msecs
PM: early resume of devices complete after 0.765 msecs
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
ACPI: EC: event unblocked
ath: phy0: ASPM enabled: 0x42
sd 0:0:0:0: [sda] Starting disk
usb usb1: root hub lost power or was reset
usb usb2: root hub lost power or was reset
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: supports DRM functions and may not be fully accessible
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: disabling queued TRIM support
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
ata3.00: configured for UDMA/133
usb 1-1: reset high-speed USB device number 2 using ehci-pci
usb 2-1: reset high-speed USB device number 2 using ehci-pci
usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
usb 1-1.1: reset full-speed USB device number 6 using ehci-pci
usb 1-1.1: device firmware changed
PM: resume of devices complete after 1035.845 msecs
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... 
usb 1-1.1: USB disconnect, device number 6
done.
usb 1-1.1: new full-speed USB device number 7 using ehci-pci
usb 1-1.1: USB disconnect, device number 7
usb 1-1.1: new full-speed USB device number 8 using ehci-pci
usb 1-1.1: device descriptor read/64, error -110
usb 1-1.1: device not accepting address 8, error -32
usb 1-1.1: new full-speed USB device number 9 using ehci-pci
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 24:de:c6:64:46:c0
wlp3s0: send auth to 24:de:c6:64:46:c0 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 24:de:c6:64:46:c0 (try 1/3)
wlp3s0: RX AssocResp from 24:de:c6:64:46:c0 (capab=0x421 status=0 aid=5)
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: associated
perf: interrupt took too long (3958 > 3938), lowering kernel.perf_event_max_sample_rate to 50400
TVGuiSlave.64[12163]: segfault at 7fb9e803a970 ip 00007fb9e803a970 sp 00007fba01df43a8 error 15
perf: interrupt took too long (4961 > 4947), lowering kernel.perf_event_max_sample_rate to 40200
wlp3s0: authenticate with 24:de:c6:64:46:c0
wlp3s0: send auth to 24:de:c6:64:46:c0 (try 1/3)
wlp3s0: send auth to 24:de:c6:64:46:c0 (try 2/3)
wlp3s0: authenticated
wlp3s0: associate with 24:de:c6:64:46:c0 (try 1/3)
wlp3s0: associate with 24:de:c6:64:46:c0 (try 2/3)
wlp3s0: associate with 24:de:c6:64:46:c0 (try 3/3)
wlp3s0: RX AssocResp from 24:de:c6:64:46:c0 (capab=0x421 status=0 aid=5)
wlp3s0: associated
wlp3s0: authenticate with 24:de:c6:64:46:c0
wlp3s0: send auth to 24:de:c6:64:46:c0 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 24:de:c6:64:46:c0 (try 1/3)
wlp3s0: RX AssocResp from 24:de:c6:64:46:c0 (capab=0x421 status=0 aid=5)
wlp3s0: associated
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
pci_bus 0000:04: Allocating resources
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from 24:de:c6:64:46:c0 by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 332.787 msecs
PM: late suspend of devices complete after 17.343 msecs
PM: noirq suspend of devices complete after 16.888 msecs
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Suspended for 2958.708 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
 cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
 cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
 cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
PM: noirq resume of devices complete after 16.215 msecs
PM: early resume of devices complete after 0.712 msecs
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
ACPI: EC: event unblocked
usb usb1: root hub lost power or was reset
ath: phy0: ASPM enabled: 0x42
mei_me 0000:00:16.0: FW not ready: resetting.
mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000055 60000106 
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
sd 0:0:0:0: [sda] Starting disk
usb usb2: root hub lost power or was reset
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/133
usb 1-1: reset high-speed USB device number 2 using ehci-pci
usb 2-1: reset high-speed USB device number 2 using ehci-pci
usb 1-1.1: reset full-speed USB device number 9 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
PM: resume of devices complete after 1133.222 msecs
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
usb 1-1.1: USB disconnect, device number 9
usb 1-1.1: new full-speed USB device number 10 using ehci-pci
usb 1-1.1: USB disconnect, device number 10
usb 1-1.1: new full-speed USB device number 11 using ehci-pci
usb 1-1.1: device descriptor read/64, error -110
usb 1-1.1: device not accepting address 11, error -32
usb 1-1.1: new full-speed USB device number 12 using ehci-pci
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with f4:6b:ef:22:7a:26
wlp3s0: send auth to f4:6b:ef:22:7a:26 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with f4:6b:ef:22:7a:26 (try 1/3)
wlp3s0: RX AssocResp from f4:6b:ef:22:7a:26 (capab=0x431 status=0 aid=4)
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: associated
perf: interrupt took too long (6215 > 6201), lowering kernel.perf_event_max_sample_rate to 32100
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
echo (20027): drop_caches: 3
echo (20087): drop_caches: 3
sh (20109): drop_caches: 3
sh (20138): drop_caches: 3
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 244
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
sh (13093): drop_caches: 3
sh (13107): drop_caches: 3
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
sh (13650): drop_caches: 3
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-ff2339eb-cdbc-1eac-2cb0-84493155791b) @ PCI:0000:01:00.0

Return To glmark2-1.1.0_test_01 System Information