dmesg - fio01
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-573.el6.x86_64 (mockbuild@c6b9.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-16) (GCC) ) #1 SMP Thu Jul 23 15:44:03 UTC 2015
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
BIOS-e820: 0000000000100000 - 00000000cd2f0000 (usable)
BIOS-e820: 00000000cd2f0000 - 00000000cd31c000 (reserved)
BIOS-e820: 00000000cd31c000 - 00000000cd35b000 (ACPI data)
BIOS-e820: 00000000cd35b000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000830000000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xFCED0
DMI: Dell Inc. PowerEdge R420/05M7VK, BIOS 1.6.7 08/30/2013
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x830000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcd2f0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cd2f0000
0000000000 - 00c0000000 page 1G
00c0000000 - 00cd200000 page 2M
00cd200000 - 00cd2f0000 page 4k
kernel direct mapping tables up to cd2f0000 @ 8000-b000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000830000000
0100000000 - 0800000000 page 1G
0800000000 - 0830000000 page 2M
kernel direct mapping tables up to 830000000 @ a000-c000
RAMDISK: 36595000 - 37fef460
ACPI: Deleted _OSI()
ACPI: Deleted _OSI()
ACPI: RSDP 00000000000f1110 00024 (v02 DELL )
ACPI: XSDT 00000000000f1258 000A4 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000cd33534c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000cd31c000 072F1 (v01 DELL PE_SC3 00000001 INTL 20110211)
ACPI: FACS 00000000cd337000 00040
ACPI: APIC 00000000cd334478 001EA (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000cd334664 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000cd3346b8 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DMAR 00000000cd3346f4 00110 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000cd334a10 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000cd334a50 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000cd334b88 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000cd3234b4 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000cd323724 0055C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000cd3232f4 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000cd323324 00190 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000cd3352e4 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: PC__ 00000000cd335274 0006E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 00000000cd334db0 004C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 00000000cd338000 0646C (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 1 -> APIC 0 -> Node 0
SRAT: PXM 2 -> APIC 32 -> Node 1
SRAT: PXM 1 -> APIC 2 -> Node 0
SRAT: PXM 2 -> APIC 34 -> Node 1
SRAT: PXM 1 -> APIC 4 -> Node 0
SRAT: PXM 2 -> APIC 36 -> Node 1
SRAT: PXM 1 -> APIC 6 -> Node 0
SRAT: PXM 2 -> APIC 38 -> Node 1
SRAT: PXM 1 -> APIC 8 -> Node 0
SRAT: PXM 2 -> APIC 40 -> Node 1
SRAT: PXM 1 -> APIC 10 -> Node 0
SRAT: PXM 2 -> APIC 42 -> Node 1
SRAT: PXM 1 -> APIC 1 -> Node 0
SRAT: PXM 2 -> APIC 33 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 0
SRAT: PXM 2 -> APIC 35 -> Node 1
SRAT: PXM 1 -> APIC 5 -> Node 0
SRAT: PXM 2 -> APIC 37 -> Node 1
SRAT: PXM 1 -> APIC 7 -> Node 0
SRAT: PXM 2 -> APIC 39 -> Node 1
SRAT: PXM 1 -> APIC 9 -> Node 0
SRAT: PXM 2 -> APIC 41 -> Node 1
SRAT: PXM 1 -> APIC 11 -> Node 0
SRAT: PXM 2 -> APIC 43 -> Node 1
SRAT: Node 0 PXM 1 0-430000000
SRAT: Node 1 PXM 2 430000000-830000000
NUMA: Allocated memnodemap from b000 - b140
NUMA: Using 28 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000430000000
NODE_DATA [000000000000b140 - 000000000003f13f]
bootmap [0000000000100000 - 0000000000185fff] pages 86
(9 early reservations) ==> bootmem [0000000000 - 0430000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000203cb24] TEXT DATA BSS ==> [0001000000 - 000203cb24]
#3 [0036595000 - 0037fef460] RAMDISK ==> [0036595000 - 0037fef460]
#4 [000009cc00 - 0000100000] BIOS reserved ==> [000009cc00 - 0000100000]
#5 [000203d000 - 000203d79d] BRK ==> [000203d000 - 000203d79d]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
#8 [000000b000 - 000000b140] MEMNODEMAP ==> [000000b000 - 000000b140]
Bootmem setup node 1 0000000430000000-0000000830000000
NODE_DATA [0000000430000040 - 000000043003403f]
bootmap [0000000430035000 - 00000004300b4fff] pages 80
(9 early reservations) ==> bootmem [0430000000 - 0830000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 000203cb24] TEXT DATA BSS
#3 [0036595000 - 0037fef460] RAMDISK
#4 [000009cc00 - 0000100000] BIOS reserved
#5 [000203d000 - 000203d79d] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 000000b000] PGTABLE
#8 [000000b000 - 000000b140] MEMNODEMAP
found SMP MP-table at [ffff8800000fe710] fe710
Reserving 131MB of memory at 48MB for crashkernel (System RAM: 33536MB)
[ffffea0000000000-ffffea000e7fffff] PMD -> [ffff880028600000-ffff8800363fffff] on node 0
[ffffea000ea80000-ffffea000ebfffff] potential offnode page_structs
[ffffea000e800000-ffffea000ebfffff] PMD -> [ffff880038000000-ffff8800383fffff] on node 0
[ffffea000ec00000-ffffea001cbfffff] PMD -> [ffff880430200000-ffff88043e1fffff] on node 1
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00830000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000001 -> 0x0000009c
0: 0x00000100 -> 0x000cd2f0
0: 0x00100000 -> 0x00430000
1: 0x00430000 -> 0x00830000
On node 0 totalpages: 4182667
DMA zone: 56 pages used for memmap
DMA zone: 105 pages reserved
DMA zone: 3834 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 822056 pages, LIFO batch:31
Normal zone: 45696 pages used for memmap
Normal zone: 3296640 pages, LIFO batch:31
On node 1 totalpages: 4194304
Normal zone: 57344 pages used for memmap
Normal zone: 4136960 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2a] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x2b] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x58] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x59] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x5a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x5b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x5c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x5d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x5e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x5f] disabled)
ACPI: LAPIC (acpi_id[0x21] lapic_id[0x60] disabled)
ACPI: LAPIC (acpi_id[0x22] lapic_id[0x61] disabled)
ACPI: LAPIC (acpi_id[0x23] lapic_id[0x62] disabled)
ACPI: LAPIC (acpi_id[0x24] lapic_id[0x63] disabled)
ACPI: LAPIC (acpi_id[0x25] lapic_id[0x64] disabled)
ACPI: LAPIC (acpi_id[0x26] lapic_id[0x65] disabled)
ACPI: LAPIC (acpi_id[0x27] lapic_id[0x66] disabled)
ACPI: LAPIC (acpi_id[0x28] lapic_id[0x67] disabled)
ACPI: LAPIC (acpi_id[0x29] lapic_id[0x68] disabled)
ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x69] disabled)
ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x6a] disabled)
ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x6b] disabled)
ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x6c] disabled)
ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x6d] disabled)
ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x6e] disabled)
ACPI: LAPIC (acpi_id[0x30] lapic_id[0x6f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec3f000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 32, address 0xfec3f000, GSI 32-55
ACPI: IOAPIC (id[0x02] address[0xfec7f000] gsi_base[64])
IOAPIC[2]: apic_id 2, version 32, address 0xfec7f000, GSI 64-87
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 48 CPUs, 24 hotplug CPUs
nr_irqs_gsi: 88
PM: Registered nosave memory: 000000000009c000 - 0000000000100000
PM: Registered nosave memory: 00000000cd2f0000 - 00000000cd31c000
PM: Registered nosave memory: 00000000cd31c000 - 00000000cd35b000
PM: Registered nosave memory: 00000000cd35b000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:48 nr_cpu_ids:48 nr_node_ids:2
PERCPU: Embedded 30 pages/cpu @ffff880038400000 s91224 r8192 d23464 u131072
pcpu-alloc: s91224 r8192 d23464 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
pcpu-alloc: [0] 32 34 36 38 40 42 44 46 -- -- -- -- -- -- -- --
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
pcpu-alloc: [1] 33 35 37 39 41 43 45 47 -- -- -- -- -- -- -- --
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 8259490
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
Memory: 32796668k/34340864k available (5394k kernel code, 832980k absent, 711216k reserved, 7014k data, 1296k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1880
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [ttyS0] enabled
allocated 134217728 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
TSC: cpu family 6 model 45, tsc initial value = 7167e86fc5479
Fast TSC calibration using PIT
Detected 1900.023 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3800.04 BogoMIPS (lpj=1900023)
pid_max: default: 49152 minimum: 384
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22127 entries in 87 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000d3000000 flags: 0x0
dmar: IOMMU 0: reg_base_addr d3000000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: DRHD base: 0x000000df100000 flags: 0x1
dmar: IOMMU 1: reg_base_addr df100000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: RMRR base: 0x000000cf458000 end: 0x000000cf46ffff
dmar: RMRR base: 0x000000cf450000 end: 0x000000cf450fff
dmar: RMRR base: 0x000000cf452000 end: 0x000000cf452fff
dmar: ATSR flags: 0x0
IOAPIC id 2 under DRHD base 0xd3000000
IOAPIC id 0 under DRHD base 0xdf100000
IOAPIC id 1 under DRHD base 0xdf100000
HPET id 0 under DRHD base 0xdf100000
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
APIC routing finalized to physical flat.
alloc irq_desc for 88 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 89 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2420 0 @ 1.90GHz stepping 07
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 1, Processors #1 Ok.
Booting Node 0, Processors #2 Ok.
Booting Node 1, Processors #3 Ok.
Booting Node 0, Processors #4 Ok.
Booting Node 1, Processors #5 Ok.
Booting Node 0, Processors #6 Ok.
Booting Node 1, Processors #7 Ok.
Booting Node 0, Processors #8 Ok.
Booting Node 1, Processors #9 Ok.
Booting Node 0, Processors #10 Ok.
Booting Node 1, Processors #11 Ok.
Booting Node 0, Processors #12 Ok.
Booting Node 1, Processors #13 Ok.
Booting Node 0, Processors #14 Ok.
Booting Node 1, Processors #15 Ok.
Booting Node 0, Processors #16 Ok.
Booting Node 1, Processors #17 Ok.
Booting Node 0, Processors #18 Ok.
Booting Node 1, Processors #19 Ok.
Booting Node 0, Processors #20 Ok.
Booting Node 1, Processors #21 Ok.
Booting Node 0, Processors #22 Ok.
Booting Node 1, Processors #23
Brought up 24 CPUs
Total of 24 processors activated (91194.50 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
PCI: Dell System detected, enabling pci=bfsort.
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3d])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x1fff]
pci_root PNP0A08:00: host bridge window [io 0xe000-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xd8000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0x1fff]
pci_bus 0000:00: root bus resource [io 0xe000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xd8000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xdf0fb000-0xdf0fb00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.1: reg 10: [mem 0xdf0fc000-0xdf0fc00f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xdf0fd000-0xdf0fd3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xdf0fe000-0xdf0fe3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xece8-0xecef]
pci 0000:00:1f.2: reg 14: [io 0xecf8-0xecfb]
pci 0000:00:1f.2: reg 18: [io 0xecf0-0xecf7]
pci 0000:00:1f.2: reg 1c: [io 0xecfc-0xecff]
pci 0000:00:1f.2: reg 20: [io 0xecc0-0xecdf]
pci 0000:00:1f.2: reg 24: [mem 0xdf0ff000-0xdf0ff7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:01:00.0: reg 10: [io 0xfc00-0xfcff]
pci 0000:01:00.0: reg 14: [mem 0xdcffc000-0xdcffffff 64bit]
pci 0000:01:00.0: reg 1c: [mem 0xdcf80000-0xdcfbffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xdc000000-0xdc01ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0xffff]
pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdcffffff]
pci 0000:00:03.0: PCI bridge to [bus 08-08]
pci 0000:00:11.0: PCI bridge to [bus 09-09]
pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
pci 0000:02:00.0: reg 10: [mem 0xd90a0000-0xd90affff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xd90b0000-0xd90bffff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xd90c0000-0xd90cffff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0xdd000000-0xdd03ffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10: [mem 0xd90d0000-0xd90dffff 64bit pref]
pci 0000:02:00.1: reg 18: [mem 0xd90e0000-0xd90effff 64bit pref]
pci 0000:02:00.1: reg 20: [mem 0xd90f0000-0xd90fffff 64bit pref]
pci 0000:02:00.1: reg 30: [mem 0xdd000000-0xdd03ffff pref]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: bridge window [mem 0xdd000000-0xdd7fffff]
pci 0000:00:1c.4: bridge window [mem 0xd9000000-0xd90fffff 64bit pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.7: PCI bridge to [bus 03-07]
pci 0000:00:1c.7: bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:00:1c.7: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
pci 0000:04:01.0: PME# disabled
pci 0000:03:00.0: PCI bridge to [bus 04-07]
pci 0000:03:00.0: bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:03:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05-06]
pci 0000:04:00.0: bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:04:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:06:00.0: reg 10: [mem 0xd8000000-0xd8ffffff pref]
pci 0000:06:00.0: reg 14: [mem 0xde7fc000-0xde7fffff]
pci 0000:06:00.0: reg 18: [mem 0xdd800000-0xddffffff]
pci 0000:05:00.0: PCI bridge to [bus 06-06]
pci 0000:05:00.0: bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:05:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:04:01.0: PCI bridge to [bus 07-07]
pci 0000:04:01.0: bridge window [mem 0xdef00000-0xdeffffff]
pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x1fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
pci0000:00: Requesting ACPI _OSC control (0x15)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 40-7e])
pci_root PNP0A08:01: host bridge window [io 0x2000-0x3fff]
pci_root PNP0A08:01: host bridge window [io 0x4000-0x5fff]
pci_root PNP0A08:01: host bridge window [io 0x6000-0x7fff]
pci_root PNP0A08:01: host bridge window [io 0x8000-0x9fff]
pci_root PNP0A08:01: host bridge window [io 0xa000-0xbfff]
pci_root PNP0A08:01: host bridge window [io 0xc000-0xdfff]
pci_root PNP0A08:01: host bridge window [mem 0xd0000000-0xd7ffffff]
PCI host bridge to bus 0000:40
pci_bus 0000:40: root bus resource [io 0x2000-0x3fff]
pci_bus 0000:40: root bus resource [io 0x4000-0x5fff]
pci_bus 0000:40: root bus resource [io 0x6000-0x7fff]
pci_bus 0000:40: root bus resource [io 0x8000-0x9fff]
pci_bus 0000:40: root bus resource [io 0xa000-0xbfff]
pci_bus 0000:40: root bus resource [io 0xc000-0xdfff]
pci_bus 0000:40: root bus resource [mem 0xd0000000-0xd7ffffff]
pci 0000:40:03.0: PME# supported from D0 D3hot D3cold
pci 0000:40:03.0: PME# disabled
pci 0000:40:03.0: PCI bridge to [bus 41-41]
pci_bus 0000:40: on NUMA node 1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.PEXB._PRT]
pci0000:40: Requesting ACPI _OSC control (0x15)
pci0000:40: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [P0B1] (domain 0000 [bus 3f])
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: on NUMA node 0
pci0000:3f: Requesting ACPI _OSC control (0x15)
pci0000:3f: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [P1B1] (domain 0000 [bus 7f])
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: on NUMA node 1
pci0000:7f: Requesting ACPI _OSC control (0x15)
pci0000:7f: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 *6 7 11 14 15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 11 *14 15)
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 90 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 91 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 92 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 93 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 94 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 90, 91, 92, 93, 94, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 90 for MSI
hpet: hpet3 irq 91 for MSI
hpet: hpet4 irq 92 for MSI
hpet: hpet5 irq 93 for MSI
hpet: hpet6 irq 94 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0080-0x009f]
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x00f0-0x00ff]
pnp 00:02: [irq 13]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [io 0x0061]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:04: [io 0x0070-0x007f]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x02f8-0x02ff]
pnp 00:05: [irq 3]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [io 0x03f8-0x03ff]
pnp 00:06: [irq 4]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [io 0x0800-0x087f]
pnp 00:07: [io 0x00e0-0x00e7]
pnp 00:07: [io 0x0880-0x08ff]
pnp 00:07: [io 0x0900-0x091f]
pnp 00:07: [io 0x0920-0x0923]
pnp 00:07: [io 0x0924]
pnp 00:07: [io 0x0370-0x0377]
pnp 00:07: [io 0x0ca0-0x0ca7]
pnp 00:07: [io 0x0ca9-0x0cab]
pnp 00:07: [io 0x0cad-0x0caf]
pnp 00:07: [io 0x0cb0-0x0cbf]
pnp 00:07: [io 0x0060-0x005f disabled]
pnp 00:07: [io 0x0064-0x0063 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:08: [io 0x0ca8]
pnp 00:08: [io 0x0cac]
pnp 00:08: [irq 10]
pnp 00:08: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
pnp 00:09: [mem 0xe0000000-0xe3efffff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:0b: [mem 0xe4000000-0xe7ffffff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:0d: [mem 0xe3f00000-0xe3ffffff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0e: [mem 0xdf100000-0xdf101fff]
pnp 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0f: [mem 0xd3000000-0xd3001fff]
pnp 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:10: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:11: [mem 0xfed00000-0xfed003ff]
pnp 00:11: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 18 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0880-0x08ff] has been reserved
system 00:07: [io 0x0900-0x091f] has been reserved
system 00:07: [io 0x0920-0x0923] has been reserved
system 00:07: [io 0x0924] has been reserved
system 00:07: [io 0x0370-0x0377] has been reserved
system 00:07: [io 0x0ca0-0x0ca7] has been reserved
system 00:07: [io 0x0ca9-0x0cab] has been reserved
system 00:07: [io 0x0cad-0x0caf] has been reserved
system 00:07: [io 0x0cb0-0x0cbf] has been reserved
system 00:08: [io 0x0ca8] has been reserved
system 00:08: [io 0x0cac] has been reserved
system 00:09: [mem 0xe0000000-0xe3efffff] has been reserved
system 00:0b: [mem 0xe4000000-0xe7ffffff] has been reserved
system 00:0d: [mem 0xe3f00000-0xe3ffffff] has been reserved
system 00:0e: [mem 0xdf100000-0xdf101fff] could not be reserved
system 00:0f: [mem 0xd3000000-0xd3001fff] could not be reserved
pci 0000:02:00.1: address space collision: [mem 0xdd000000-0xdd03ffff pref] conflicts with 0000:02:00.0 [mem 0xdd000000-0xdd03ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0xffff]
pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdcffffff]
pci 0000:00:03.0: PCI bridge to [bus 08-08]
pci 0000:00:11.0: PCI bridge to [bus 09-09]
pci 0000:00:1c.0: PCI bridge to [bus 0a-0a]
pci 0000:02:00.1: BAR 6: assigned [mem 0xd9000000-0xd903ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 02-02]
pci 0000:00:1c.4: bridge window [mem 0xdd000000-0xdd7fffff]
pci 0000:00:1c.4: bridge window [mem 0xd9000000-0xd90fffff 64bit pref]
pci 0000:05:00.0: PCI bridge to [bus 06-06]
pci 0000:05:00.0: bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:05:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05-06]
pci 0000:04:00.0: bridge window [mem 0xdd800000-0xde7fffff]
pci 0000:04:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:04:01.0: PCI bridge to [bus 07-07]
pci 0000:04:01.0: bridge window [mem 0xdef00000-0xdeffffff]
pci 0000:03:00.0: PCI bridge to [bus 04-07]
pci 0000:03:00.0: bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:03:00.0: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 03-07]
pci 0000:00:1c.7: bridge window [mem 0xdd800000-0xdeffffff]
pci 0000:00:1c.7: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
pci 0000:40:03.0: PCI bridge to [bus 41-41]
alloc irq_desc for 53 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:11.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:11.0: setting latency timer to 64
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:03:00.0: setting latency timer to 64
pci 0000:04:00.0: setting latency timer to 64
pci 0000:05:00.0: setting latency timer to 64
pci 0000:04:01.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
alloc irq_desc for 85 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pci 0000:40:03.0: PCI INT A -> GSI 85 (level, low) -> IRQ 85
pci 0000:40:03.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0x1fff]
pci_bus 0000:00: resource 8 [io 0xe000-0xffff]
pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 10 [mem 0xd8000000-0xdfffffff]
pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdcffffff]
pci_bus 0000:02: resource 1 [mem 0xdd000000-0xdd7fffff]
pci_bus 0000:02: resource 2 [mem 0xd9000000-0xd90fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xdd800000-0xdeffffff]
pci_bus 0000:03: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xdd800000-0xdeffffff]
pci_bus 0000:04: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xdd800000-0xde7fffff]
pci_bus 0000:05: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xdd800000-0xde7fffff]
pci_bus 0000:06: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xdef00000-0xdeffffff]
pci_bus 0000:0b: resource 4 [io 0x0000-0x03af]
pci_bus 0000:0b: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:0b: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:0b: resource 7 [io 0x0d00-0x1fff]
pci_bus 0000:0b: resource 8 [io 0xe000-0xffff]
pci_bus 0000:0b: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0b: resource 10 [mem 0xd8000000-0xdfffffff]
pci_bus 0000:0b: resource 11 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:40: resource 4 [io 0x2000-0x3fff]
pci_bus 0000:40: resource 5 [io 0x4000-0x5fff]
pci_bus 0000:40: resource 6 [io 0x6000-0x7fff]
pci_bus 0000:40: resource 7 [io 0x8000-0x9fff]
pci_bus 0000:40: resource 8 [io 0xa000-0xbfff]
pci_bus 0000:40: resource 9 [io 0xc000-0xdfff]
pci_bus 0000:40: resource 10 [mem 0xd0000000-0xd7ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:06:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26985k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
futex hash table entries: 16384 (order: 8, 1048576 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1499250319.878:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 70243B77E3333653
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 95 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:01.0: irq 95 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 96 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.0: irq 96 for MSI/MSI-X
pcieport 0000:00:11.0: setting latency timer to 64
alloc irq_desc for 97 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:11.0: irq 97 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 98 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.0: irq 98 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 99 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.4: irq 99 for MSI/MSI-X
pcieport 0000:00:1c.7: setting latency timer to 64
alloc irq_desc for 100 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.7: irq 100 for MSI/MSI-X
pcieport 0000:40:03.0: setting latency timer to 64
alloc irq_desc for 101 on node 1
alloc kstat_irqs on node 1
alloc irq_2_iommu on node 1
pcieport 0000:40:03.0: irq 101 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
ACPI: \_PR_.CP25: failed to get CPU APIC ID.
ACPI: \_PR_.CP26: failed to get CPU APIC ID.
ACPI: \_PR_.CP27: failed to get CPU APIC ID.
ACPI: \_PR_.CP28: failed to get CPU APIC ID.
ACPI: \_PR_.CP29: failed to get CPU APIC ID.
ACPI: \_PR_.CP30: failed to get CPU APIC ID.
ACPI: \_PR_.CP31: failed to get CPU APIC ID.
ACPI: \_PR_.CP32: failed to get CPU APIC ID.
ACPI: \_PR_.CP33: failed to get CPU APIC ID.
ACPI: \_PR_.CP34: failed to get CPU APIC ID.
ACPI: \_PR_.CP35: failed to get CPU APIC ID.
ACPI: \_PR_.CP36: failed to get CPU APIC ID.
ACPI: \_PR_.CP37: failed to get CPU APIC ID.
ACPI: \_PR_.CP38: failed to get CPU APIC ID.
ACPI: \_PR_.CP39: failed to get CPU APIC ID.
ACPI: \_PR_.CP40: failed to get CPU APIC ID.
ACPI: \_PR_.CP41: failed to get CPU APIC ID.
ACPI: \_PR_.CP42: failed to get CPU APIC ID.
ACPI: \_PR_.CP43: failed to get CPU APIC ID.
ACPI: \_PR_.CP44: failed to get CPU APIC ID.
ACPI: \_PR_.CP45: failed to get CPU APIC ID.
ACPI: \_PR_.CP46: failed to get CPU APIC ID.
ACPI: \_PR_.CP47: failed to get CPU APIC ID.
ACPI: \_PR_.CP48: failed to get CPU APIC ID.
[Firmware Bug]: No valid trip found
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 23, io mem 0xdf0fd000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-573.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 22, io mem 0xdf0fe000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-573.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2017-07-05 10:25:22 UTC (1499250322)
Initalizing network drop monitor service
Freeing unused kernel memory: 1296k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 732k freed
Freeing unused kernel memory: 1576k freed
dracut: dracut-004-388.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ahci 0000:00:1f.2: version 3.0
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
alloc irq_desc for 102 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
ahci 0000:00:1f.2: irq 102 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff100 irq 102
ata2: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff180 irq 102
ata3: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff200 irq 102
ata4: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff280 irq 102
ata5: SATA max UDMA/133 abar m2048@0xdf0ff000 port 0xdf0ff300 irq 102
ata6: DUMMY
Refined TSC clocksource calibration: 1899.999 MHz.
Switching to clocksource tsc
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.6: new high speed USB device number 3 using ehci_hcd
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata5.00: ATAPI: TSSTcorp DVD-ROM SN-108DN, D150, max UDMA/100, ATAPI AN
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM TSSTcorp DVD-ROM SN-108DN D150 PQ: 0 ANSI: 5
usb 1-1.6: New USB device found, idVendor=0624, idProduct=0248
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: Gadget USB HUB
usb 1-1.6: Manufacturer: no manufacturer
usb 1-1.6: SerialNumber: 0123456789
usb 1-1.6: configuration #1 chosen from 1 choice
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 6 ports detected
ACPI: WMI: Mapper loaded
megasas: 06.806.08.00-rh3 Thu. Sep. 4 17:00:00 PDT 2014
megasas: 0x1000:0x005b:0x1028:0x1f38: bus 1:slot 0:func 0
alloc irq_desc for 34 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
megaraid_sas 0000:01:00.0: setting latency timer to 64
megasas: FW now in Ready state
alloc irq_desc for 103 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 103 for MSI/MSI-X
alloc irq_desc for 104 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 104 for MSI/MSI-X
alloc irq_desc for 105 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 105 for MSI/MSI-X
alloc irq_desc for 106 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 106 for MSI/MSI-X
alloc irq_desc for 107 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 107 for MSI/MSI-X
alloc irq_desc for 108 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 108 for MSI/MSI-X
alloc irq_desc for 109 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 109 for MSI/MSI-X
alloc irq_desc for 110 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 110 for MSI/MSI-X
alloc irq_desc for 111 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 111 for MSI/MSI-X
alloc irq_desc for 112 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 112 for MSI/MSI-X
alloc irq_desc for 113 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 113 for MSI/MSI-X
alloc irq_desc for 114 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 114 for MSI/MSI-X
alloc irq_desc for 115 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 115 for MSI/MSI-X
alloc irq_desc for 116 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 116 for MSI/MSI-X
alloc irq_desc for 117 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 117 for MSI/MSI-X
alloc irq_desc for 118 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:01:00.0: irq 118 for MSI/MSI-X
megaraid_sas 0000:01:00.0: [scsi6]: FW supports MSIX vector,Online CPUs: ,Current MSIX
megasas:IOC Init cmd success
usb 1-1.6.1: new high speed USB device number 4 using ehci_hcd
megaraid_sas 0000:01:00.0: Firmware supports 64 VD 256 PD
megaraid_sas 0000:01:00.0: Driver supports 256 VD 256 PD
megasas: INIT adapter done
usb 1-1.6.1: New USB device found, idVendor=0624, idProduct=0249
usb 1-1.6.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 1-1.6.1: Product: Keyboard/Mouse Function
usb 1-1.6.1: Manufacturer: Avocent
usb 1-1.6.1: SerialNumber: 20120917
usb 1-1.6.1: configuration #1 chosen from 1 choice
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.0/input/input2
generic-usb 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input0
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.1/input/input3
generic-usb 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input1
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.1/1-1.6.1:1.2/input/input4
generic-usb 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:1a.0-1.6.1/input2
megaraid_sas 0000:01:00.0: Controller type: MR,Memory size is: 512MB
scsi6 : LSI SAS based MegaRAID driver
scsi 6:2:0:0: Direct-Access DELL PERC H710 3.13 PQ: 0 ANSI: 5
usb 1-1.6.4: new high speed USB device number 5 using ehci_hcd
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
usb 1-1.6.4: New USB device found, idVendor=0624, idProduct=0251
usb 1-1.6.4: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 1-1.6.4: Product: Mass Storage Function
usb 1-1.6.4: Manufacturer: Avocent
usb 1-1.6.4: SerialNumber: 20120919-1
usb 1-1.6.4: configuration #1 chosen from 1 choice
sd 6:2:0:0: [sda] 1169686528 512-byte logical blocks: (598 GB/557 GiB)
sd 6:2:0:0: [sda] Write Protect is off
sd 6:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 6:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 6:2:0:0: [sda] Attached SCSI disk
Initializing USB Mass Storage driver...
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sda2
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1499250324.466:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
usb-storage: device scan complete
scsi 7:0:0:0: CD-ROM iDRAC Virtual CD 0329 PQ: 0 ANSI: 0
scsi 7:0:0:1: Direct-Access iDRAC Virtual Floppy 0329 PQ: 0 ANSI: 0 CCS
sr1: scsi3-mmc drive: 0x/0x cd/rw caddy
sr 7:0:0:0: Attached scsi CD-ROM sr1
sd 7:0:0:1: [sdb] Attached SCSI removable disk
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Jul 23 2015
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0
EDAC MC1: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#1': DEV 0000:7f:0e.0
EDAC sbridge: Driver loaded.
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.137 (May 11, 2014)
tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:02:00.0: setting latency timer to 64
tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address f0:1f:af:e0:6c:35
tg3 0000:02:00.0: eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
tg3 0000:02:00.1: setting latency timer to 64
tg3 0000:02:00.1: eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address f0:1f:af:e0:6c:36
tg3 0000:02:00.1: eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:02:00.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:02:00.1: eth1: dma_rwctrl[00000001] dma_mask[64-bit]
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
microcode: CPU0 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU1 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU2 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU3 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU4 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU5 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU6 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU7 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU8 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU9 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU10 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU11 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU12 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU13 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU14 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU15 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU16 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU17 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU18 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU19 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU20 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU21 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU22 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
microcode: CPU23 sig=0x206d7, pf=0x8, revision=0x710
platform microcode: firmware: requesting intel-ucode/06-2d-07
Microcode Update Driver: v2.00 , Peter Oruba
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 10
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 10
IRQ 10/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
ipmi_si ipmi_si.0: Using irq 10
ipmi_si ipmi_si.0: Couldn't set irq info: cc.
ipmi_si ipmi_si.0: Maybe ok, but ipmi might run very slowly.
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
ACPI: No handler for Region [SYSI] (ffff88082a60f348) [IPMI]
power_meter ACPI000D:00: Found ACPI power meter.
sr 4:0:0:0: Attached scsi generic sg0 type 5
sd 6:2:0:0: Attached scsi generic sg1 type 0
sr 7:0:0:0: Attached scsi generic sg2 type 5
sd 7:0:0:1: Attached scsi generic sg3 type 0
ipmi device interface
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts:
Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
alloc irq_desc for 119 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.0: irq 119 for MSI/MSI-X
alloc irq_desc for 120 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.0: irq 120 for MSI/MSI-X
alloc irq_desc for 121 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.0: irq 121 for MSI/MSI-X
alloc irq_desc for 122 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.0: irq 122 for MSI/MSI-X
alloc irq_desc for 123 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.0: irq 123 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0: eth0: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
alloc irq_desc for 124 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.1: irq 124 for MSI/MSI-X
alloc irq_desc for 125 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.1: irq 125 for MSI/MSI-X
alloc irq_desc for 126 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.1: irq 126 for MSI/MSI-X
alloc irq_desc for 127 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.1: irq 127 for MSI/MSI-X
alloc irq_desc for 128 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
tg3 0000:02:00.1: irq 128 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
eth0: no IPv6 routers present
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
tg3 0000:02:00.0: eth0: Link is down
tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0: eth0: EEE is disabled
tg3 0000:02:00.1: eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.1: eth1: Flow control is off for TX and off for RX
tg3 0000:02:00.1: eth1: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
usb 1-1.6.4: USB disconnect, device number 5
lo: Disabled Privacy Extensions
tg3 0000:02:00.0: irq 119 for MSI/MSI-X
tg3 0000:02:00.0: irq 120 for MSI/MSI-X
tg3 0000:02:00.0: irq 121 for MSI/MSI-X
tg3 0000:02:00.0: irq 122 for MSI/MSI-X
tg3 0000:02:00.0: irq 123 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0: eth0: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.1: irq 124 for MSI/MSI-X
tg3 0000:02:00.1: irq 125 for MSI/MSI-X
tg3 0000:02:00.1: irq 126 for MSI/MSI-X
tg3 0000:02:00.1: irq 127 for MSI/MSI-X
tg3 0000:02:00.1: irq 128 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
tg3 0000:02:00.1: eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.1: eth1: Flow control is off for TX and off for RX
tg3 0000:02:00.1: eth1: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth0: no IPv6 routers present
eth1: no IPv6 routers present
lo: Disabled Privacy Extensions
tg3 0000:02:00.0: irq 119 for MSI/MSI-X
tg3 0000:02:00.0: irq 120 for MSI/MSI-X
tg3 0000:02:00.0: irq 121 for MSI/MSI-X
tg3 0000:02:00.0: irq 122 for MSI/MSI-X
tg3 0000:02:00.0: irq 123 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0: eth0: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.1: irq 124 for MSI/MSI-X
tg3 0000:02:00.1: irq 125 for MSI/MSI-X
tg3 0000:02:00.1: irq 126 for MSI/MSI-X
tg3 0000:02:00.1: irq 127 for MSI/MSI-X
tg3 0000:02:00.1: irq 128 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
tg3 0000:02:00.1: eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.1: eth1: Flow control is off for TX and off for RX
tg3 0000:02:00.1: eth1: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth0: no IPv6 routers present
eth1: no IPv6 routers present
tg3 0000:02:00.0: eth0: Link is down
tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0: eth0: EEE is enabled
tg3 0000:02:00.0: eth0: Link is down
tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0: eth0: EEE is disabled
tg3 0000:02:00.0: eth0: Link is down
tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0: eth0: EEE is enabled
tg3 0000:02:00.0: eth0: Link is down
tg3 0000:02:00.1: eth1: Link is down
tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0: eth0: EEE is disabled
tg3 0000:02:00.1: eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.1: eth1: Flow control is off for TX and off for RX
tg3 0000:02:00.1: eth1: EEE is enabled
tg3 0000:02:00.0: irq 119 for MSI/MSI-X
tg3 0000:02:00.0: irq 120 for MSI/MSI-X
tg3 0000:02:00.0: irq 121 for MSI/MSI-X
tg3 0000:02:00.0: irq 122 for MSI/MSI-X
tg3 0000:02:00.0: irq 123 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0: eth0: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tg3 0000:02:00.1: eth1: Link is down
tg3 0000:02:00.1: eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.1: eth1: Flow control is off for TX and off for RX
tg3 0000:02:00.1: eth1: EEE is disabled
tg3 0000:02:00.0: eth0: Link is down
tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0: eth0: EEE is disabled
tg3 0000:02:00.1: irq 124 for MSI/MSI-X
tg3 0000:02:00.1: irq 125 for MSI/MSI-X
tg3 0000:02:00.1: irq 126 for MSI/MSI-X
tg3 0000:02:00.1: irq 127 for MSI/MSI-X
tg3 0000:02:00.1: irq 128 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
tg3 0000:02:00.1: eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.1: eth1: Flow control is off for TX and off for RX
tg3 0000:02:00.1: eth1: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
tg3 0000:02:00.1: eth1: Link is down
tg3 0000:02:00.1: eth1: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.1: eth1: Flow control is off for TX and off for RX
tg3 0000:02:00.1: eth1: EEE is disabled
NOHZ: local_softirq_pending 100
device eth1 entered promiscuous mode
device eth1 left promiscuous mode
device eth1 entered promiscuous mode
device eth1 left promiscuous mode
tg3 0000:02:00.1: eth1: Link is down
tg3 0000:02:00.0: eth0: Link is down
usb 2-1.8: new low speed USB device number 3 using ehci_hcd
usb 2-1.8: New USB device found, idVendor=1c4f, idProduct=0026
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8: Product: USB Keyboard
usb 2-1.8: Manufacturer: SIGMACHIP
usb 2-1.8: configuration #1 chosen from 1 choice
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input5
generic-usb 0003:1C4F:0026.0004: input,hidraw3: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1d.0-1.8/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input6
generic-usb 0003:1C4F:0026.0005: input,hidraw4: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1d.0-1.8/input1
lo: Disabled Privacy Extensions
tg3 0000:02:00.0: irq 119 for MSI/MSI-X
tg3 0000:02:00.0: irq 120 for MSI/MSI-X
tg3 0000:02:00.0: irq 121 for MSI/MSI-X
tg3 0000:02:00.0: irq 122 for MSI/MSI-X
tg3 0000:02:00.0: irq 123 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX
tg3 0000:02:00.0: eth0: EEE is disabled
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
usb 2-1.8: USB disconnect, device number 3