dmesg - test01
Linux version 4.13.10-gentoo-4N4kiN (root@) (gcc version 5.4.0 (Gentoo 5.4.0-r3 p1.4, pie-0.6.5)) #1 SMP PREEMPT Tue Oct 31 18:15:40 CET 2017
KERNEL supported cpus:
Intel GenuineIntel
x86/fpu: x87 FPU will use FXSAVE
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e5000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf78ffff] usable
BIOS-e820: [mem 0x00000000bf790000-0x00000000bf79dfff] ACPI data
BIOS-e820: [mem 0x00000000bf79e000-0x00000000bf7cffff] ACPI NVS
BIOS-e820: [mem 0x00000000bf7d0000-0x00000000bf7dffff] reserved
BIOS-e820: [mem 0x00000000bf7ed000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000c3fffffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.6 present.
DMI: System manufacturer System Product Name/Z8NA-D6(C), BIOS 1303 05/10/2012
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0xc40000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask F800000000 write-back
1 base 0800000000 mask FC00000000 write-back
2 base 0C00000000 mask FFC0000000 write-back
3 base 00C0000000 mask FFC0000000 uncachable
4 base 00BF800000 mask FFFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
total RAM covered: 49144M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 8 lose cover RAM: 0G
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf790 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x01f11000, 0x01f11fff] PGTABLE
BRK [0x01f12000, 0x01f12fff] PGTABLE
BRK [0x01f13000, 0x01f13fff] PGTABLE
RAMDISK: [mem 0x3730f000-0x3797efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FB600 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000BF790100 00006C (v01 051012 XSDT1206 20120510 MSFT 00000097)
ACPI: FACP 0x00000000BF790290 0000F4 (v03 051012 FACP1206 20120510 MSFT 00000097)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20170531/tbfadt-603)
ACPI: DSDT 0x00000000BF790540 005C1C (v01 S0081 S0081001 00000001 INTL 20060113)
ACPI: FACS 0x00000000BF79E000 000040
ACPI: FACS 0x00000000BF79E000 000040
ACPI: APIC 0x00000000BF790390 00011E (v01 051012 APIC1206 20120510 MSFT 00000097)
ACPI: MCFG 0x00000000BF7904B0 00003C (v01 051012 OEMMCFG 20120510 MSFT 00000097)
ACPI: SPMI 0x00000000BF7904F0 000041 (v05 051012 OEMSPMI 20120510 MSFT 00000097)
ACPI: OEMB 0x00000000BF79E040 000072 (v01 051012 OEMB1206 20120510 MSFT 00000097)
ACPI: SRAT 0x00000000BF798540 0001A8 (v01 051012 OEMSRAT 00000001 INTL 00000001)
ACPI: HPET 0x00000000BF7986F0 000038 (v01 051012 OEMHPET 20120510 MSFT 00000097)
ACPI: DMAR 0x00000000BF79E0C0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
ACPI: SSDT 0x00000000BF7A2220 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x32 -> Node 1
SRAT: PXM 1 -> APIC 0x34 -> Node 1
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x33 -> Node 1
SRAT: PXM 1 -> APIC 0x35 -> Node 1
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0xbfffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x63fffffff]
ACPI: SRAT: Node 1 PXM 1 [mem 0x640000000-0xc3fffffff]
NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x63fffffff] -> [mem 0x00000000-0x63fffffff]
NODE_DATA(0) allocated [mem 0x63ffde000-0x63fffffff]
NODE_DATA(1) allocated [mem 0xc3ffdc000-0xc3fffdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000c3fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000bf78ffff]
node 0: [mem 0x0000000100000000-0x000000063fffffff]
node 1: [mem 0x0000000640000000-0x0000000c3fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000063fffffff]
On node 0 totalpages: 6289197
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12191 pages used for memmap
DMA32 zone: 780176 pages, LIFO batch:31
Normal zone: 86016 pages used for memmap
Normal zone: 5505024 pages, LIFO batch:31
Initmem setup node 1 [mem 0x0000000640000000-0x0000000c3fffffff]
On node 1 totalpages: 6291456
Normal zone: 98304 pages used for memmap
Normal zone: 6291456 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 24 CPUs, 8 hotplug CPUs
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:2
percpu: Embedded 36 pages/cpu @ffff880627a00000 s107800 r8192 d31464 u262144
pcpu-alloc: s107800 r8192 d31464 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 08 09 10 11 [0] 16 18 20 22 -- -- -- --
pcpu-alloc: [1] 04 05 06 07 12 13 14 15 [1] 17 19 21 23 -- -- -- --
Built 2 zonelists in Node order, mobility grouping on. Total pages: 12384057
Policy zone: Normal
DMAR: Disable GFX device mapping
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 94208 bytes
log_buf_len min size: 131072 bytes
log_buf_len: 262144 bytes
early log buf free: 121260(92%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 49444032K/50322612K available (7627K kernel code, 1753K rwdata, 1960K rodata, 1984K init, 1408K bss, 878580K reserved, 0K cma-reserved)
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=24.
RCU priority boosting: priority 1 delay 500 ms.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
Offload RCU callbacks from CPUs: .
Console: colour VGA+ 80x25
console [tty1] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2400.350 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.70 BogoMIPS (lpj=2400350)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 2 ACPI AML tables successfully acquired and loaded
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K
smpboot: Max logical packages: 6
DMAR: Host address width 40
DMAR: DRHD base: 0x000000fbffe000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffe000 ver 1:0 cap c90780106f0462 ecap f020fe
DMAR: RMRR base: 0x000000000e5000 end: 0x000000000e7fff
DMAR: RMRR base: 0x000000bf7ed000 end: 0x000000bf7fffff
DMAR: ATSR flags: 0x0
DMAR-IR: IOAPIC id 6 under DRHD base 0xfbffe000 IOMMU 0
DMAR-IR: IOAPIC id 7 under DRHD base 0xfbffe000 IOMMU 0
DMAR-IR: Enabled IRQ remapping in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (family: 0x6, model: 0x2c, stepping: 0x2)
Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
core: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
.... node #1, CPUs: #4 #5 #6 #7
.... node #0, CPUs: #8 #9 #10 #11
.... node #1, CPUs: #12 #13 #14 #15
smp: Brought up 2 nodes, 16 CPUs
smpboot: Total of 16 processors activated (76876.04 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbf79e000-0xbf7cffff] (204800 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes)
prandom: seed boundary self test passed
prandom: 100 self tests passed
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880623900000 002FB4 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880623802000 000961 (v01 PmRef P001Cst 00003001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880623899000 0006E2 (v01 PmRef Cpu0Tst 00003000 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:3403] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:340f] type 01 class 0x060400
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [8086:3411] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:16.0: [8086:3430] type 00 class 0x088000
pci 0000:00:16.0: reg 0x10: [mem 0xf9cd8000-0xf9cdbfff 64bit]
pci 0000:00:16.1: [8086:3431] type 00 class 0x088000
pci 0000:00:16.1: reg 0x10: [mem 0xf9cdc000-0xf9cdffff 64bit]
pci 0000:00:16.2: [8086:3432] type 00 class 0x088000
pci 0000:00:16.2: reg 0x10: [mem 0xf9ce0000-0xf9ce3fff 64bit]
pci 0000:00:16.3: [8086:3433] type 00 class 0x088000
pci 0000:00:16.3: reg 0x10: [mem 0xf9ce4000-0xf9ce7fff 64bit]
pci 0000:00:16.4: [8086:3429] type 00 class 0x088000
pci 0000:00:16.4: reg 0x10: [mem 0xf9ce8000-0xf9cebfff 64bit]
pci 0000:00:16.5: [8086:342a] type 00 class 0x088000
pci 0000:00:16.5: reg 0x10: [mem 0xf9cec000-0xf9ceffff 64bit]
pci 0000:00:16.6: [8086:342b] type 00 class 0x088000
pci 0000:00:16.6: reg 0x10: [mem 0xf9cf0000-0xf9cf3fff 64bit]
pci 0000:00:16.7: [8086:342c] type 00 class 0x088000
pci 0000:00:16.7: reg 0x10: [mem 0xf9cf4000-0xf9cf7fff 64bit]
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x9400-0x941f]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x9480-0x949f]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf9cfc000-0xf9cfc3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf9cf8000-0xf9cfbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x9800-0x981f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x9880-0x989f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x9c00-0x9c1f]
pci 0000:00:1d.3: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xa000-0xa01f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf9cfd000-0xf9cfd3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xa080-0xa087]
pci 0000:00:1f.2: reg 0x14: [io 0xa880-0xa883]
pci 0000:00:1f.2: reg 0x18: [io 0xa800-0xa807]
pci 0000:00:1f.2: reg 0x1c: [io 0xa480-0xa483]
pci 0000:00:1f.2: reg 0x20: [io 0xa400-0xa41f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf9cfe000-0xf9cfe7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf9cff000-0xf9cff0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:0b:00.0: [12d8:e111] type 01 class 0x060400
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 0b-0c]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:0c:04.0: [1102:0008] type 00 class 0x040100
pci 0000:0c:04.0: reg 0x10: [io 0xec00-0xec3f]
pci 0000:0c:04.0: supports D1 D2
pci 0000:0b:00.0: PCI bridge to [bus 0c]
pci 0000:0b:00.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: PCI bridge to [bus 0a]
pci 0000:00:03.0: PCI bridge to [bus 09]
pci 0000:08:00.0: [10de:1004] type 00 class 0x030000
pci 0000:08:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:08:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:08:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
pci 0000:08:00.0: reg 0x24: [io 0xdc00-0xdc7f]
pci 0000:08:00.0: reg 0x30: [mem 0xf9f80000-0xf9ffffff pref]
pci 0000:08:00.1: [10de:0e1a] type 00 class 0x040300
pci 0000:08:00.1: reg 0x10: [mem 0xfbefc000-0xfbefffff]
pci 0000:00:07.0: PCI bridge to [bus 08]
pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xf9f00000-0xfbefffff]
pci 0000:00:07.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:00:08.0: PCI bridge to [bus 07]
pci 0000:00:09.0: PCI bridge to [bus 06]
pci 0000:00:0a.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:03:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf9ee0000-0xf9efffff]
pci 0000:03:00.0: reg 0x18: [io 0xcc00-0xcc1f]
pci 0000:03:00.0: reg 0x1c: [mem 0xf9edc000-0xf9edffff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf9e00000-0xf9efffff]
pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xf9de0000-0xf9dfffff]
pci 0000:02:00.0: reg 0x18: [io 0xbc00-0xbc1f]
pci 0000:02:00.0: reg 0x1c: [mem 0xf9ddc000-0xf9ddffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xf9d00000-0xf9dfffff]
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 *11 12 14 15)
pci 0000:08:00.0: vgaarb: setting as boot VGA device
pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:08:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus fe
PCI: root bus fe: using default resources
PCI: Probing PCI hardware (bus fe)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:fe
pci_bus 0000:fe: root bus resource [io 0x0000-0xffff]
pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
pci_bus 0000:fe: busn_res: can not insert [bus fe-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:fe:00.0: [8086:2c70] type 00 class 0x060000
pci 0000:fe:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:fe:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:fe:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:fe:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:fe:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:fe:02.4: [8086:2d94] type 00 class 0x060000
pci 0000:fe:02.5: [8086:2d95] type 00 class 0x060000
pci 0000:fe:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:fe:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:fe:03.2: [8086:2d9a] type 00 class 0x060000
pci 0000:fe:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:fe:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:fe:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:fe:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:fe:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:fe:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:fe:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:fe:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:fe:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:fe:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:fe:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:fe:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:fe:06.3: [8086:2db3] type 00 class 0x060000
pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
pci_bus 0000:fe: busn_res: can not insert [bus fe] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:ff:00.0: [8086:2c70] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2d81] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2d90] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2d91] type 00 class 0x060000
pci 0000:ff:02.2: [8086:2d92] type 00 class 0x060000
pci 0000:ff:02.3: [8086:2d93] type 00 class 0x060000
pci 0000:ff:02.4: [8086:2d94] type 00 class 0x060000
pci 0000:ff:02.5: [8086:2d95] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2d98] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2d99] type 00 class 0x060000
pci 0000:ff:03.2: [8086:2d9a] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2d9c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2da0] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2da1] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2da2] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2da3] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2da8] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2da9] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2daa] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2dab] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2db0] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2db1] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2db2] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2db3] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf790000-0xbfffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
FS-Cache: Loaded
pnp: PnP ACPI init
system 00:00: [mem 0xfbf00000-0xfbffffff] could not be reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x0ca0-0x0caf] has been reserved
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: [io 0x0500-0x057f] could not be reserved
system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:0b:00.0: PCI bridge to [bus 0c]
pci 0000:0b:00.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: PCI bridge to [bus 0b-0c]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: PCI bridge to [bus 0a]
pci 0000:00:03.0: PCI bridge to [bus 09]
pci 0000:00:07.0: PCI bridge to [bus 08]
pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:07.0: bridge window [mem 0xf9f00000-0xfbefffff]
pci 0000:00:07.0: bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
pci 0000:00:08.0: PCI bridge to [bus 07]
pci 0000:00:09.0: PCI bridge to [bus 06]
pci 0000:00:0a.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf9e00000-0xf9efffff]
pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xf9d00000-0xf9dfffff]
pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
pci_bus 0000:0b: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0c: resource 0 [io 0xe000-0xefff]
pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:08: resource 1 [mem 0xf9f00000-0xfbefffff]
pci_bus 0000:08: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0xc0000000-0xc01fffff]
pci_bus 0000:04: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xf9e00000-0xf9efffff]
pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xf9d00000-0xf9dfffff]
pci_bus 0000:02: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff window]
pci_bus 0000:fe: resource 4 [io 0x0000-0xffff]
pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:08:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 256 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 6592K
DMAR: dmar0: Using Queued invalidation
DMAR: Setting RMRR:
DMAR: Setting identity map for device 0000:00:1a.0 [0xbf7ed000 - 0xbf7fffff]
DMAR: Setting identity map for device 0000:00:1a.1 [0xbf7ed000 - 0xbf7fffff]
DMAR: Setting identity map for device 0000:00:1a.7 [0xbf7ed000 - 0xbf7fffff]
DMAR: Setting identity map for device 0000:00:1d.0 [0xbf7ed000 - 0xbf7fffff]
DMAR: Setting identity map for device 0000:00:1d.1 [0xbf7ed000 - 0xbf7fffff]
DMAR: Setting identity map for device 0000:00:1d.2 [0xbf7ed000 - 0xbf7fffff]
DMAR: Setting identity map for device 0000:00:1d.3 [0xbf7ed000 - 0xbf7fffff]
DMAR: Setting identity map for device 0000:00:1d.7 [0xbf7ed000 - 0xbf7fffff]
DMAR: Setting identity map for device 0000:00:1a.0 [0xe5000 - 0xe7fff]
DMAR: Setting identity map for device 0000:00:1a.1 [0xe5000 - 0xe7fff]
DMAR: Setting identity map for device 0000:00:1a.7 [0xe5000 - 0xe7fff]
DMAR: Setting identity map for device 0000:00:1d.0 [0xe5000 - 0xe7fff]
DMAR: Setting identity map for device 0000:00:1d.1 [0xe5000 - 0xe7fff]
DMAR: Setting identity map for device 0000:00:1d.2 [0xe5000 - 0xe7fff]
DMAR: Setting identity map for device 0000:00:1d.3 [0xe5000 - 0xe7fff]
DMAR: Setting identity map for device 0000:00:1d.7 [0xe5000 - 0xe7fff]
DMAR: Prepare 0-16MiB unity mapping for LPC
DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
DMAR: Intel(R) Virtualization Technology for Directed I/O
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:01.0 to group 1
iommu: Adding device 0000:00:02.0 to group 2
iommu: Adding device 0000:00:03.0 to group 3
iommu: Adding device 0000:00:07.0 to group 4
iommu: Adding device 0000:00:08.0 to group 5
iommu: Adding device 0000:00:09.0 to group 6
iommu: Adding device 0000:00:0a.0 to group 7
iommu: Adding device 0000:00:10.0 to group 8
iommu: Adding device 0000:00:10.1 to group 8
iommu: Adding device 0000:00:11.0 to group 9
iommu: Adding device 0000:00:11.1 to group 9
iommu: Adding device 0000:00:14.0 to group 10
iommu: Adding device 0000:00:14.1 to group 10
iommu: Adding device 0000:00:14.2 to group 10
iommu: Adding device 0000:00:14.3 to group 10
iommu: Adding device 0000:00:16.0 to group 11
iommu: Adding device 0000:00:16.1 to group 11
iommu: Adding device 0000:00:16.2 to group 11
iommu: Adding device 0000:00:16.3 to group 11
iommu: Adding device 0000:00:16.4 to group 11
iommu: Adding device 0000:00:16.5 to group 11
iommu: Adding device 0000:00:16.6 to group 11
iommu: Adding device 0000:00:16.7 to group 11
iommu: Adding device 0000:00:1a.0 to group 12
iommu: Adding device 0000:00:1a.1 to group 12
iommu: Adding device 0000:00:1a.7 to group 12
iommu: Adding device 0000:00:1b.0 to group 13
iommu: Adding device 0000:00:1c.0 to group 14
iommu: Adding device 0000:00:1c.4 to group 14
iommu: Adding device 0000:00:1c.5 to group 14
iommu: Adding device 0000:00:1d.0 to group 15
iommu: Adding device 0000:00:1d.1 to group 15
iommu: Adding device 0000:00:1d.2 to group 15
iommu: Adding device 0000:00:1d.3 to group 15
iommu: Adding device 0000:00:1d.7 to group 15
iommu: Adding device 0000:00:1e.0 to group 16
iommu: Adding device 0000:00:1f.0 to group 17
iommu: Adding device 0000:00:1f.2 to group 17
iommu: Adding device 0000:00:1f.3 to group 17
iommu: Adding device 0000:0b:00.0 to group 18
iommu: Adding device 0000:0c:04.0 to group 18
iommu: Adding device 0000:08:00.0 to group 19
iommu: Adding device 0000:08:00.1 to group 19
iommu: Adding device 0000:03:00.0 to group 14
iommu: Adding device 0000:02:00.0 to group 14
iommu: Adding device 0000:fe:00.0 to group 20
iommu: Adding device 0000:fe:00.1 to group 20
iommu: Adding device 0000:fe:02.0 to group 21
iommu: Adding device 0000:fe:02.1 to group 21
iommu: Adding device 0000:fe:02.2 to group 21
iommu: Adding device 0000:fe:02.3 to group 21
iommu: Adding device 0000:fe:02.4 to group 21
iommu: Adding device 0000:fe:02.5 to group 21
iommu: Adding device 0000:fe:03.0 to group 22
iommu: Adding device 0000:fe:03.1 to group 22
iommu: Adding device 0000:fe:03.2 to group 22
iommu: Adding device 0000:fe:03.4 to group 22
iommu: Adding device 0000:fe:04.0 to group 23
iommu: Adding device 0000:fe:04.1 to group 23
iommu: Adding device 0000:fe:04.2 to group 23
iommu: Adding device 0000:fe:04.3 to group 23
iommu: Adding device 0000:fe:05.0 to group 24
iommu: Adding device 0000:fe:05.1 to group 24
iommu: Adding device 0000:fe:05.2 to group 24
iommu: Adding device 0000:fe:05.3 to group 24
iommu: Adding device 0000:fe:06.0 to group 25
iommu: Adding device 0000:fe:06.1 to group 25
iommu: Adding device 0000:fe:06.2 to group 25
iommu: Adding device 0000:fe:06.3 to group 25
iommu: Adding device 0000:ff:00.0 to group 26
iommu: Adding device 0000:ff:00.1 to group 26
iommu: Adding device 0000:ff:02.0 to group 27
iommu: Adding device 0000:ff:02.1 to group 27
iommu: Adding device 0000:ff:02.2 to group 27
iommu: Adding device 0000:ff:02.3 to group 27
iommu: Adding device 0000:ff:02.4 to group 27
iommu: Adding device 0000:ff:02.5 to group 27
iommu: Adding device 0000:ff:03.0 to group 28
iommu: Adding device 0000:ff:03.1 to group 28
iommu: Adding device 0000:ff:03.2 to group 28
iommu: Adding device 0000:ff:03.4 to group 28
iommu: Adding device 0000:ff:04.0 to group 29
iommu: Adding device 0000:ff:04.1 to group 29
iommu: Adding device 0000:ff:04.2 to group 29
iommu: Adding device 0000:ff:04.3 to group 29
iommu: Adding device 0000:ff:05.0 to group 30
iommu: Adding device 0000:ff:05.1 to group 30
iommu: Adding device 0000:ff:05.2 to group 30
iommu: Adding device 0000:ff:05.3 to group 30
iommu: Adding device 0000:ff:06.0 to group 31
iommu: Adding device 0000:ff:06.1 to group 31
iommu: Adding device 0000:ff:06.2 to group 31
iommu: Adding device 0000:ff:06.3 to group 31
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=24 bucket_order=0
DLM installed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
NET: Registered protocol family 38
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
crc32: self tests passed, processed 225944 bytes in 186965 nsec
crc32c: CRC_LE_BITS = 64
crc32c: self tests passed, processed 225944 bytes in 95264 nsec
crc32_combine: 8373 self tests passed
crc32c_combine: 8373 self tests passed
glob: 64 self-tests passed, 0 failed
pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x2C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
button: probe of LNXPWRBN:00 failed with error -22
GHES: HEST is not enabled!
ioatdma: Intel(R) QuickData Technology Driver 4.00
brd: module loaded
loop: module loaded
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170531/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082B (\_SB.PCI0.SBRG.GPE0) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000051A-0x000000000000051A (\_SI.LEDR) (20170531/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
gpio_ich: GPIO from 451 to 511 on gpio_ich
lpc_ich: Resource conflict(s) found affecting gpio_ich
megasas: 07.701.17.00-rc1
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
ahci 0000:00:1f.2: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf9cfe000 port 0xf9cfe100 irq 49
ata2: SATA max UDMA/133 abar m2048@0xf9cfe000 port 0xf9cfe180 irq 50
ata3: SATA max UDMA/133 abar m2048@0xf9cfe000 port 0xf9cfe200 irq 51
ata4: SATA max UDMA/133 abar m2048@0xf9cfe000 port 0xf9cfe280 irq 52
ata5: SATA max UDMA/133 abar m2048@0xf9cfe000 port 0xf9cfe300 irq 53
ata6: SATA max UDMA/133 abar m2048@0xf9cfe000 port 0xf9cfe380 irq 54
libphy: Fixed MDIO Bus: probed
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:03:00.0 0000:03:00.0 (uninitialized): registered PHC clock
e1000e 0000:03:00.0 eth0: (PCI Express:2.5GT/s:Width x1) c8:60:00:e9:02:7c
e1000e 0000:03:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:03:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock
e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) c8:60:00:e9:06:44
e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9cfc000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.10-gentoo-4N4kiN ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9cfd000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.10-gentoo-4N4kiN ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver xpad
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
device-mapper: multipath round-robin: version 1.2.0 loaded
device-mapper: multipath queue-length: version 0.2.0 loaded
device-mapper: multipath service-time: version 0.3.0 loaded
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
sctp: Hash tables configured (bind 1024/1024)
Key type dns_resolver registered
microcode: sig=0x206c2, pf=0x1, revision=0x14
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (3668698299, 0)->(3818711551, -150013252)
registered taskstats version 1
Loading compiled-in X.509 certificates
rtc_cmos 00:01: setting system clock to 2017-11-01 16:54:01 UTC (1509555241)
OF: Duplicate name in testcase-data, renamed to "duplicate-name#1"
### dt-test ### start of unittest - you will see error messages
OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
OF: overlay: overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8
OF: overlay: overlay #5 is not topmost
i2c i2c-1: Added multiplexed i2c bus 2
i2c i2c-1: Added multiplexed i2c bus 3
### dt-test ### FAIL of_unittest_overlay_high_level():2188 overlay_base_root not initialized
### dt-test ### end of unittest - 188 passed, 1 failed
ALSA device list:
No soundcards found.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: SanDisk Ultra II 480GB, X41200RL, max UDMA/133
ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SanDisk Ultra II 00RL PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI removable disk
tsc: Refined TSC clocksource calibration: 2400.084 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229886f1f14, max_idle_ns: 440795306808 ns
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: NCQ Send/Recv Log not supported
ata2.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133
ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: NCQ Send/Recv Log not supported
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] supports TCG Opal
sd 1:0:0:0: [sdb] Attached SCSI removable disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: OCZ VERTEX-LE, 1.11, max UDMA/133
ata3.00: 195371568 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA OCZ VERTEX-LE 1.11 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 195371568 512-byte logical blocks: (100 GB/93.2 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg2 type 0
sdc:
sd 2:0:0:0: [sdc] Attached SCSI removable disk
clocksource: Switched to clocksource tsc
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: OCZ-VERTEX LE, 1.11, max UDMA/133
ata4.00: 195371568 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA OCZ-VERTEX LE 1.11 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 195371568 512-byte logical blocks: (100 GB/93.2 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: Attached scsi generic sg3 type 0
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI removable disk
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: FUJITSU MJA2500BH G2, 8919, max UDMA/100
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/100
scsi 4:0:0:0: Direct-Access ATA FUJITSU MJA2500B 8919 PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg4 type 0
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI removable disk
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: PLEXTOR BD-R PX-LB950SA, 1.06, max UDMA/100
ata6.00: configured for UDMA/100
scsi 5:0:0:0: CD-ROM PLEXTOR BD-R PX-LB950SA 1.06 PQ: 0 ANSI: 5
sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg5 type 5
Freeing unused kernel memory: 1984K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 548K
Freeing unused kernel memory: 88K
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009400
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.13.10-gentoo-4N4kiN uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009480
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.13.10-gentoo-4N4kiN uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.13.10-gentoo-4N4kiN uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009880
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.13.10-gentoo-4N4kiN uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009c00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.13.10-gentoo-4N4kiN uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000a000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 4.13.10-gentoo-4N4kiN uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 4-2: new full-speed USB device number 2 using uhci_hcd
usb 5-1: new full-speed USB device number 2 using uhci_hcd
usb 5-1: New USB device found, idVendor=1e7d, idProduct=3246
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: ROCCAT Suora FX
usb 5-1: Manufacturer: ROCCAT
usb 5-1: SerialNumber: AP0000000003
input: ROCCAT ROCCAT Suora FX as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:1E7D:3246.0001/input/input5
hid-generic 0003:1E7D:3246.0001: input,hidraw0: USB HID v1.11 Keyboard [ROCCAT ROCCAT Suora FX] on usb-0000:00:1d.0-1/input0
hid-generic 0003:1E7D:3246.0002: hiddev0,hidraw1: USB HID v1.11 Device [ROCCAT ROCCAT Suora FX] on usb-0000:00:1d.0-1/input1
input: ROCCAT ROCCAT Suora FX as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.2/0003:1E7D:3246.0003/input/input6
hid-generic 0003:1E7D:3246.0003: input,hiddev1,hidraw2: USB HID v1.11 Mouse [ROCCAT ROCCAT Suora FX] on usb-0000:00:1d.0-1/input2
hid-generic 0003:1E7D:3246.0004: hiddev2,hidraw3: USB HID v1.11 Device [ROCCAT ROCCAT Suora FX] on usb-0000:00:1d.0-1/input3
usb 4-2: New USB device found, idVendor=0a12, idProduct=0001
usb 4-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-2: Product: BT2.0
usb 5-2: new full-speed USB device number 3 using uhci_hcd
usb 5-2: not running at top speed; connect to a high speed hub
usb 5-2: New USB device found, idVendor=1e7d, idProduct=2e24
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: ROCCAT Kone EMP
usb 5-2: Manufacturer: ROCCAT
input: ROCCAT ROCCAT Kone EMP as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:1E7D:2E24.0005/input/input7
hid-generic 0003:1E7D:2E24.0005: input,hiddev3,hidraw4: USB HID v1.11 Mouse [ROCCAT ROCCAT Kone EMP] on usb-0000:00:1d.0-2/input0
input: ROCCAT ROCCAT Kone EMP as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/0003:1E7D:2E24.0006/input/input8
usbcore: registered new interface driver usb-storage
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
hid-generic 0003:1E7D:2E24.0006: input,hidraw5: USB HID v1.11 Keyboard [ROCCAT ROCCAT Kone EMP] on usb-0000:00:1d.0-2/input1
raid6: sse2x1 gen() 5734 MB/s
raid6: sse2x1 xor() 4599 MB/s
raid6: sse2x2 gen() 6960 MB/s
raid6: sse2x2 xor() 5427 MB/s
raid6: sse2x4 gen() 7691 MB/s
raid6: sse2x4 xor() 6039 MB/s
raid6: using algorithm sse2x4 gen() 7691 MB/s
raid6: .... xor() 6039 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 10296.000 MB/sec
generic_sse: 9032.000 MB/sec
xor: using function: prefetch64-sse (10296.000 MB/sec)
Btrfs loaded, crc32c=crc32c-generic, assert=on
SGI XFS with ACLs, security attributes, realtime, no debug enabled
fuse init (API version 7.26)
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
sky2: driver version 1.30
VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Loading iSCSI transport class v2.0-870.
EXT4-fs (sda3): INFO: recovery required on readonly filesystem
EXT4-fs (sda3): write access will be enabled during recovery
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Remote File Systems.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Socket.
i5500_temp 0000:00:14.3: Sensor seems to be disabled
w83627ehf: Found W83667HG chip at 0x290
Adding 131068k swap on /dev/sda2. Priority:-1 extents:1 across:131068k SS
w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
i2c i2c-0: Found w83795adg rev. B at 0x2f
EXT4-fs (dm-0): re-mounted. Opts: (null)
EXT4-fs (sda3): re-mounted. Opts: (null)
w83795 0-002f: PECI agent 1 Tbase temperature: 83
w83795 0-002f: PECI agent 2 Tbase temperature: 83
w83795 0-002f: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 16 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2400071326 Hz
vboxdrv: Successfully loaded version 5.1.30 (interface 0x002a0000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU found
/dev/vmmon[1901]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[1901]: Using tsc_khz as TSC frequency: 2400084
/dev/vmmon[1901]: Module vmmon: initialized
[1901]: VMCI: shared components initialized.
[1901]: VMCI: host components initialized.
[1901]: VMCI: Module registered (name=vmci, major=10, minor=50).
[1901]: VMCI: Using host personality
[1901]: VMCI: Module (name=vmci) is initialized
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[1907]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
e1000e 0000:03:00.0 enp3s0: renamed from eth0
e1000e 0000:02:00.0 enp2s0: renamed from eth1
i2c i2c-0: Added multiplexed i2c bus 1
i2c i2c-0: Added multiplexed i2c bus 2
i2c-mux-gpio i2c-mux-gpio.2.auto: 2 port mux on SMBus I801 adapter at 0400 adapter
Linux agpgart interface v0.103
snd_emu10k1 0000:0c:04.0: emu1010: Special config.
snd_emu10k1 0000:0c:04.0: emu1010: EMU_HANA_ID = 0x3f
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read] Request device [0c:00.0] fault addr 0 [fault reason 06] PTE Read access is not set
snd_emu10k1 0000:0c:04.0: emu1010: Hana Firmware loaded
snd_emu10k1 0000:0c:04.0: emu1010: Hana version: 1.6
snd_emu10k1 0000:0c:04.0: emu1010: Card options = 0x5
snd_emu10k1 0000:0c:04.0: emu1010: Card options = 0x5
snd_emu10k1 0000:0c:04.0: emu1010: Card options3 = 0x5
nvidia-nvlink: Nvlink Core is being initialized, major device number 240
nvidia 0000:08:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 387.22 Wed Oct 25 23:13:21 PDT 2017 (using threaded interrupts)
snd_emu10k1 0000:0c:04.0: Audigy2 value: Special config.
snd_emu10k1 0000:0c:04.0: EMU outputs on
snd_emu10k1 0000:0c:04.0: EMU2 inputs on
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 387.22 Wed Oct 25 22:46:40 PDT 2017
systemd-journald[1907]: File /var/log/journal/fb4ba97c43c261e2c7bf7a4d56955eec/system.journal corrupted or uncleanly shut down, renaming and replacing.
Bluetooth: Core ver 2.22
Bluetooth: Starting self testing
Bluetooth: ECDH test passed in 7916 usecs
Bluetooth: SMP test passed in 1375 usecs
Bluetooth: Finished self testing
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[drm] [nvidia-drm] [GPU ID 0x00000800] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:08:00.0 on minor 0
SSE version of gcm_enc/dec engaged.
usbcore: registered new interface driver btusb
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
Bluetooth: hci0 hardware error 0x37
iommu: Removing device 0000:08:00.1 from group 19
iommu: Removing device 0000:00:1b.0 from group 13
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
/dev/vmnet: open called by PID 2335 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 2338 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 2346 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 2347 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 2350 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
random: crng init done
e1000e: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
/dev/vmnet: open called by PID 2290 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-enp2s0: up
bridge-enp2s0: attached
userif-2: sent link down event.
userif-2: sent link up event.
Bridge firewalling registered
Initializing XFRM netlink socket
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
userif-2: sent link down event.
userif-2: sent link up event.
nvidia-modeset: Allocated GPU:0 (GPU-b249c47d-bc99-d767-6b7d-65690d12d2f0) @ PCI:0000:08:00.0
systemd-journald[1907]: File /var/log/journal/fb4ba97c43c261e2c7bf7a4d56955eec/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
CIPCServer::Thr[7604]: segfault at fff7f7f7 ip 00000000ee3cfd75 sp 00000000ed0ee6c0 error 4 in steamclient.so[edc75000+13c7000]
usb 2-4: new high-speed USB device number 4 using ehci-pci
usb 2-4: New USB device found, idVendor=152d, idProduct=0539
usb 2-4: New USB device strings: Mfr=10, Product=11, SerialNumber=5
usb 2-4: Product: USB3.0 to SATA Bridge
usb 2-4: Manufacturer: JMicron
usb 2-4: SerialNumber: 4273AFFFFFFF
usb-storage 2-4:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-4:1.0
scsi 6:0:0:0: Direct-Access ST2000DX 001-1NS164 0100 PQ: 0 ANSI: 2 CCS
sd 6:0:0:0: Attached scsi generic sg6 type 0
sd 6:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 6:0:0:0: [sdf] Write Protect is off
sd 6:0:0:0: [sdf] Mode Sense: 28 00 00 00
sd 6:0:0:0: [sdf] No Caching mode page found
sd 6:0:0:0: [sdf] Assuming drive cache: write through
sdf: sdf1
sd 6:0:0:0: [sdf] Attached SCSI disk
EXT4-fs (sdf1): recovery complete
EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 239