dmesg - iozone-01-debian9-kvm-pcbrauchy
Linux version 4.9.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.51-1 (2017-09-28)
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bffd8fff] usable
BIOS-e820: [mem 0x00000000bffd9000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Hypervisor detected: KVM
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask FFC0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xbffd9 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f6970-0x000f697f] mapped at [ffff92b0c00f6970]
Base memory trampoline at [ffff92b0c0099000] 99000 size 24576
BRK [0x19952f000, 0x19952ffff] PGTABLE
BRK [0x199530000, 0x199530fff] PGTABLE
BRK [0x199531000, 0x199531fff] PGTABLE
BRK [0x199532000, 0x199532fff] PGTABLE
BRK [0x199533000, 0x199533fff] PGTABLE
BRK [0x199534000, 0x199534fff] PGTABLE
BRK [0x199535000, 0x199535fff] PGTABLE
BRK [0x199536000, 0x199536fff] PGTABLE
RAMDISK: [mem 0x35d13000-0x36e80fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6920 000014 (v00 BOCHS )
ACPI: RSDT 0x00000000BFFE1778 00002C (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 0x00000000BFFE1634 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 0x00000000BFFDFB80 001AB4 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
ACPI: FACS 0x00000000BFFDFB40 000040
ACPI: APIC 0x00000000BFFE16A8 0000D0 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
NODE_DATA(0) allocated [mem 0x23fff7000-0x23fffbfff]
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 2:3ffef001, primary cpu clock
kvm-clock: using sched offset of 3190709882 cycles
clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000bffd8fff]
node 0: [mem 0x0000000100000000-0x000000023fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
On node 0 totalpages: 2097015
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12224 pages used for memmap
DMA32 zone: 782297 pages, LIFO batch:31
Normal zone: 20480 pages used for memmap
Normal zone: 1310720 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x608
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbffd9000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfeffbfff]
PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xfffbffff]
PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
e820: [mem 0xc0000000-0xfeffbfff] available for PCI devices
Booting paravirtualized kernel on KVM
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff92b2f7200000 s103512 r8192 d31656 u262144
pcpu-alloc: s103512 r8192 d31656 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
KVM setup async PF for cpu 0
kvm-stealtime: cpu 0, msr 23720d980
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2064226
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8155700K/8388060K available (6196K kernel code, 1137K rwdata, 2856K rodata, 1396K init, 688K bss, 232360K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=12.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=12
NR_IRQS:33024 nr_irqs:520 16
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Detected 3600.128 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped) preset value.. 7200.25 BogoMIPS (lpj=14400512)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160831
ACPI: 1 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
mce: CPU supports 10 MCE banks
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
Freeing SMP alternatives memory: 24K
ftrace: allocating 25191 entries in 99 pages
smpboot: Max logical packages: 12
x2apic enabled
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Opteron 23xx (Gen 3 Class Opteron) (family: 0x10, model: 0x2, stepping: 0x3)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
kvm-clock: cpu 1, msr 2:3ffef041, secondary cpu clock
KVM setup async PF for cpu 1
kvm-stealtime: cpu 1, msr 23724d980
#2
kvm-clock: cpu 2, msr 2:3ffef081, secondary cpu clock
KVM setup async PF for cpu 2
kvm-stealtime: cpu 2, msr 23728d980
#3
kvm-clock: cpu 3, msr 2:3ffef0c1, secondary cpu clock
KVM setup async PF for cpu 3
kvm-stealtime: cpu 3, msr 2372cd980
#4
kvm-clock: cpu 4, msr 2:3ffef101, secondary cpu clock
KVM setup async PF for cpu 4
kvm-stealtime: cpu 4, msr 23730d980
#5
kvm-clock: cpu 5, msr 2:3ffef141, secondary cpu clock
KVM setup async PF for cpu 5
kvm-stealtime: cpu 5, msr 23734d980
#6
kvm-clock: cpu 6, msr 2:3ffef181, secondary cpu clock
KVM setup async PF for cpu 6
kvm-stealtime: cpu 6, msr 23738d980
#7
kvm-clock: cpu 7, msr 2:3ffef1c1, secondary cpu clock
KVM setup async PF for cpu 7
kvm-stealtime: cpu 7, msr 2373cd980
#8
kvm-clock: cpu 8, msr 2:3ffef201, secondary cpu clock
KVM setup async PF for cpu 8
kvm-stealtime: cpu 8, msr 23740d980
#9
kvm-clock: cpu 9, msr 2:3ffef241, secondary cpu clock
KVM setup async PF for cpu 9
kvm-stealtime: cpu 9, msr 23744d980
#10
kvm-clock: cpu 10, msr 2:3ffef281, secondary cpu clock
KVM setup async PF for cpu 10
kvm-stealtime: cpu 10, msr 23748d980
#11
kvm-clock: cpu 11, msr 2:3ffef2c1, secondary cpu clock
KVM setup async PF for cpu 11
kvm-stealtime: cpu 11, msr 2374cd980
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (86403.07 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io 0xc140-0xc14f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
pci 0000:00:02.0: [1b36:0100] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf4000000-0xf7ffffff]
pci 0000:00:02.0: reg 0x14: [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: reg 0x18: [mem 0xfc054000-0xfc055fff]
pci 0000:00:02.0: reg 0x1c: [io 0xc080-0xc09f]
pci 0000:00:02.0: reg 0x30: [mem 0xfc040000-0xfc04ffff pref]
pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [io 0xc0a0-0xc0bf]
pci 0000:00:03.0: reg 0x14: [mem 0xfc056000-0xfc056fff]
pci 0000:00:03.0: reg 0x20: [mem 0xfebf0000-0xfebf3fff 64bit pref]
pci 0000:00:03.0: reg 0x30: [mem 0xfc000000-0xfc03ffff pref]
pci 0000:00:04.0: [8086:2668] type 00 class 0x040300
pci 0000:00:04.0: reg 0x10: [mem 0xfc050000-0xfc053fff]
pci 0000:00:05.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:05.0: reg 0x20: [io 0xc0c0-0xc0df]
pci 0000:00:05.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:05.1: reg 0x20: [io 0xc0e0-0xc0ff]
pci 0000:00:05.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:05.2: reg 0x20: [io 0xc100-0xc11f]
pci 0000:00:05.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:05.7: reg 0x10: [mem 0xfc057000-0xfc057fff]
pci 0000:00:06.0: [1af4:1003] type 00 class 0x078000
pci 0000:00:06.0: reg 0x10: [io 0xc000-0xc03f]
pci 0000:00:06.0: reg 0x14: [mem 0xfc058000-0xfc058fff]
pci 0000:00:06.0: reg 0x20: [mem 0xfebf4000-0xfebf7fff 64bit pref]
pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000
pci 0000:00:07.0: reg 0x10: [io 0xc040-0xc07f]
pci 0000:00:07.0: reg 0x14: [mem 0xfc059000-0xfc059fff]
pci 0000:00:07.0: reg 0x20: [mem 0xfebf8000-0xfebfbfff 64bit pref]
pci 0000:00:08.0: [1af4:1002] type 00 class 0x00ff00
pci 0000:00:08.0: reg 0x10: [io 0xc120-0xc13f]
pci 0000:00:08.0: reg 0x20: [mem 0xfebfc000-0xfebfffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
ACPI: Enabled 3 GPEs in block 00 to 0F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbffd9000-0xbfffffff]
clocksource: Switched to clocksource kvm-clock
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17848K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbfd9000-0xbffd9000] (64MB) mapped at [ffff92b17bfd9000-ffff92b17ffd8fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e4cc9bf26, max_idle_ns: 440795378299 ns
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1508385231.865:1): initialized
workingset: timestamp_bits=40 max_order=21 bucket_order=0
zbud: loaded
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: CPU0: patch_level=0x01000065
microcode: CPU1: patch_level=0x01000065
microcode: CPU2: patch_level=0x01000065
microcode: CPU3: patch_level=0x01000065
microcode: CPU4: patch_level=0x01000065
microcode: CPU5: patch_level=0x01000065
microcode: CPU6: patch_level=0x01000065
microcode: CPU7: patch_level=0x01000065
microcode: CPU8: patch_level=0x01000065
microcode: CPU9: patch_level=0x01000065
microcode: CPU10: patch_level=0x01000065
microcode: CPU11: patch_level=0x01000065
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
zswap: loaded using pool lzo/zbud
ima: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:00: setting system clock to 2017-10-19 03:53:51 UTC (1508385231)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1396K
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1980K
Freeing unused kernel memory: 1240K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
SCSI subsystem initialized
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
ehci-pci: EHCI PCI platform driver
libata version 3.00 loaded.
FDC 0 is a S82078B
vda: vda1 vda2 < vda5 >
virtio_net virtio0 ens3: renamed from eth0
uhci_hcd 0000:00:05.0: UHCI Host Controller
uhci_hcd 0000:00:05.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:05.0: detected 2 ports
uhci_hcd 0000:00:05.0: irq 10, io base 0x0000c0c0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.0-4-amd64 uhci_hcd
usb usb1: SerialNumber: 0000:00:05.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:05.1: UHCI Host Controller
uhci_hcd 0000:00:05.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:05.1: detected 2 ports
uhci_hcd 0000:00:05.1: irq 11, io base 0x0000c0e0
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 4.9.0-4-amd64 uhci_hcd
usb usb2: SerialNumber: 0000:00:05.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:05.2: UHCI Host Controller
uhci_hcd 0000:00:05.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:05.2: detected 2 ports
uhci_hcd 0000:00:05.2: irq 11, io base 0x0000c100
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.9.0-4-amd64 uhci_hcd
usb usb3: SerialNumber: 0000:00:05.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:05.7: EHCI Host Controller
ehci-pci 0000:00:05.7: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:05.7: irq 10, io mem 0xfc057000
ehci-pci 0000:00:05.7: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.9.0-4-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:05.7
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc140 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc148 irq 15
ata1.01: NODEV after polling detection
ata1.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
ata1.00: configured for MWDMA2
scsi 0:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
sr 0:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
usb 4-1: new high-speed USB device number 2 using ehci-pci
random: fast init done
PM: Starting manual resume from disk
PM: Hibernation image partition 254:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
usb 4-1: New USB device found, idVendor=0627, idProduct=0001
usb 4-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
usb 4-1: Product: QEMU USB Tablet
usb 4-1: Manufacturer: QEMU
usb 4-1: SerialNumber: 42
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:05.7/usb4/4-1/4-1:1.0/0003:0627:0001.0001/input/input3
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU QEMU USB Tablet] on usb-0000:00:05.7-1/input0
EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected virtualization qemu.
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting Debug File System...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target Remote File Systems.
EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
systemd-journald[279]: Received request to flush runtime journal from PID 1
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[drm] Initialized
sr 0:0:0:0: Attached scsi generic sg0 type 5
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
input: PC Speaker as /devices/platform/pcspkr/input/input5
[drm] Device Version 0.0
[drm] Compression level 0 log level 0
[drm] Currently using mode #0, list at 0x488
[drm] 12286 io pages at offset 0x1000000
[drm] 16777216 byte draw area at offset 0x0
[drm] RAM header offset: 0x3ffe000
[drm] rom modes offset 0x488 for 128 modes
[TTM] Zone kernel: Available graphics memory: 4089094 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] qxl: 16M of VRAM memory size
[drm] qxl: 63M of IO pages memory ready (VRAM domain)
[drm] qxl: 64M of Surface memory size
[drm] main mem slot 1 [f4000000,3ffe000]
[drm] surface mem slot 2 [f8000000,4000000]
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
[drm] fb mappable at 0xF4000000, size 3145728
[drm] fb: depth 24, pitch 4096, width 1024, height 768
fbcon: qxldrmfb (fb0) is primary device
Adding 8386556k swap on /dev/vda5. Priority:-1 extents:1 across:8386556k FS
ppdev: user-space parallel port driver
Console: switching to colour frame buffer device 128x48
qxl 0000:00:02.0: fb0: qxldrmfb frame buffer device
[drm] Initialized qxl 0.1.0 20120117 for 0000:00:02.0 on minor 0
snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x3/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_generic hdaudioC0D0: inputs:
snd_hda_codec_generic hdaudioC0D0: Line=0x5
IPv6: ADDRCONF(NETDEV_UP): ens3: link is not ready
random: crng init done