Xorg.0.log - iozone-01-debian9-kvm-pcbrauchy
(--) Log file renamed from "/var/log/Xorg.pid-559.log" to "/var/log/Xorg.0.log"
X.Org X Server 1.19.2
Release Date: 2017-03-02
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian
Current Operating System: Linux debian 4.9.0-4-amd64 #1 SMP Debian 4.9.51-1 (2017-09-28) x86_64
Build Date: 16 October 2017 08:19:45AM
xorg-server 2:1.19.2-1+deb9u2 ()
Current version of pixman: 0.34.0
Before reporting problems, check
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 19 00:53:52 2017
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor ""
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(==) Max clients allowed: 256, resource mask: 0x1fffff
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x5572cb779e00
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 23.0
X.Org XInput driver : 24.1
X.Org Server Extension : 10.0
(++) using VT number 7
(II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
(II) xfree86: Adding drm device (/dev/dri/card0)
(--) PCI:*(0:0:2:0) 1b36:0100:1af4:1100 rev 4, Mem @ 0xf4000000/67108864, 0xf8000000/67108864, 0xfc054000/8192, I/O @ 0x0000c080/32, BIOS @ 0x????????/131072
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.19.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 10.0
(==) Matched qxl as autoconfigured driver 0
(==) Matched qxl as autoconfigured driver 1
(==) Matched modesetting as autoconfigured driver 2
(==) Matched fbdev as autoconfigured driver 3
(==) Matched vesa as autoconfigured driver 4
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "qxl"
(II) Loading /usr/lib/xorg/modules/drivers/qxl_drv.so
(II) Module qxl: vendor="X.Org Foundation"
compiled for 1.19.0, module version = 0.1.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 23.0
(II) LoadModule: "modesetting"
(II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
(II) Module modesetting: vendor="X.Org Foundation"
compiled for 1.19.2, module version = 1.19.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 23.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.19.0, module version = 0.4.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 23.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.19.0, module version = 2.3.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 23.0
(II) qxl: Driver for QXL virtual graphics: QXL 1
(II) modesetting: Driver for Modesetting Kernel Drivers: kms
(II) FBDEV: driver for framebuffer: fbdev
(II) VESA: driver for VESA chipsets: vesa
(II) [KMS] Kernel modesetting enabled.
(WW) Falling back to old probe method for modesetting
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.19.2, module version = 0.0.2
ABI class: X.Org Video Driver, version 23.0
(WW) Falling back to old probe method for vesa
(II) qxl(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) qxl(0): Depth 24, (--) framebuffer bpp 32
(==) qxl(0): RGB weight 888
(==) qxl(0): Default visual is TrueColor
(==) qxl(0): Using gamma correction (1.0, 1.0, 1.0)
(II) qxl(0): Deferred Frames: Disabled
(II) qxl(0): Offscreen Surfaces: Enabled
(II) qxl(0): Image Cache: Enabled
(II) qxl(0): Fallback Cache: Enabled
(==) qxl(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.19.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) qxl(0): Output Virtual-0 has no monitor section
(II) qxl(0): Output Virtual-1 has no monitor section
(II) qxl(0): Output Virtual-2 has no monitor section
(II) qxl(0): Output Virtual-3 has no monitor section
(II) qxl(0): EDID for output Virtual-0
(II) qxl(0): Printing probed modes for output Virtual-0
(II) qxl(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz P)
(II) qxl(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz)
(II) qxl(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
(II) qxl(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz)
(II) qxl(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) qxl(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) qxl(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) qxl(0): Modeline "1440x900"x59.9 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) qxl(0): Modeline "1280x960"x59.9 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync (59.7 kHz)
(II) qxl(0): Modeline "1280x854"x59.9 89.25 1280 1352 1480 1680 854 857 867 887 -hsync +vsync (53.1 kHz)
(II) qxl(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
(II) qxl(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz)
(II) qxl(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) qxl(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
(II) qxl(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz)
(II) qxl(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz)
(II) qxl(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
(II) qxl(0): EDID for output Virtual-1
(II) qxl(0): EDID for output Virtual-2
(II) qxl(0): EDID for output Virtual-3
(II) qxl(0): Output Virtual-0 connected
(II) qxl(0): Output Virtual-1 disconnected
(II) qxl(0): Output Virtual-2 disconnected
(II) qxl(0): Output Virtual-3 disconnected
(II) qxl(0): Using exact sizes for initial modes
(II) qxl(0): Output Virtual-0 using initial mode 1024x768 +0+0
(II) qxl(0): PreInit complete
(II) UnloadModule: "modesetting"
(II) Unloading modesetting
(II) UnloadModule: "fbdev"
(II) Unloading fbdev
(II) UnloadSubModule: "fbdevhw"
(II) Unloading fbdevhw
(II) UnloadModule: "vesa"
(II) Unloading vesa
(--) Depth 24 pixmap format is 32 bpp
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) put_image
(II) qxl(0): RandR 1.2 enabled, ignore the following RandR disabled message.
resizing primary to 1024x768
primary is 0x5572cca956f0
(--) RandR disabled
(II) SELinux: Disabled on system
(II) AIGLX: Screen 0 is not DRI2 capable
(EE) AIGLX: reverting to software rendering
(II) IGLX: enabled GLX_MESA_copy_sub_buffer
(II) IGLX: Loaded and initialized swrast
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) qxl(0): Setting screen physical size to 270 x 203
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "libinput keyboard catchall"
(II) LoadModule: "libinput"
(II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
(II) Module libinput: vendor="X.Org Foundation"
compiled for 1.19.0, module version = 0.23.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 24.1
(II) Using input driver 'libinput' for 'Power Button'
(**) Power Button: always reports core events
(**) Option "Device" "/dev/input/event2"
(**) Option "_source" "server/udev"
(II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
(II) input device 'Power Button', /dev/input/event2 is a keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event2"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "latam"
(II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
(II) input device 'Power Button', /dev/input/event2 is a keyboard
(II) config/udev: Adding input device QEMU QEMU USB Tablet (/dev/input/event1)
(**) QEMU QEMU USB Tablet: Applying InputClass "libinput pointer catchall"
(II) Using input driver 'libinput' for 'QEMU QEMU USB Tablet'
(**) QEMU QEMU USB Tablet: always reports core events
(**) Option "Device" "/dev/input/event1"
(**) Option "_source" "server/udev"
(II) input device 'QEMU QEMU USB Tablet', /dev/input/event1 is tagged by udev as: Mouse
(II) input device 'QEMU QEMU USB Tablet', /dev/input/event1 is a pointer caps
(**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:05.7/usb4/4-1/4-1:1.0/0003:0627:0001.0001/input/input3/event1"
(II) XINPUT: Adding extended input device "QEMU QEMU USB Tablet" (type: MOUSE, id 7)
(**) Option "AccelerationScheme" "none"
(**) QEMU QEMU USB Tablet: (accel) selected scheme none/0
(**) QEMU QEMU USB Tablet: (accel) acceleration factor: 2.000
(**) QEMU QEMU USB Tablet: (accel) acceleration threshold: 4
(II) input device 'QEMU QEMU USB Tablet', /dev/input/event1 is tagged by udev as: Mouse
(II) input device 'QEMU QEMU USB Tablet', /dev/input/event1 is a pointer caps
(II) config/udev: Adding input device QEMU QEMU USB Tablet (/dev/input/js0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device QEMU QEMU USB Tablet (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
(II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
(**) AT Translated Set 2 keyboard: always reports core events
(**) Option "Device" "/dev/input/event0"
(**) Option "_source" "server/udev"
(II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
(II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
(**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "latam"
(II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
(II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
(II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event3)
(**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "libinput pointer catchall"
(II) Using input driver 'libinput' for 'ImExPS/2 Generic Explorer Mouse'
(**) ImExPS/2 Generic Explorer Mouse: always reports core events
(**) Option "Device" "/dev/input/event3"
(**) Option "_source" "server/udev"
(II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event3 is tagged by udev as: Mouse
(II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event3 is a pointer caps
(**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event3"
(II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 9)
(**) Option "AccelerationScheme" "none"
(**) ImExPS/2 Generic Explorer Mouse: (accel) selected scheme none/0
(**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
(**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
(II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event3 is tagged by udev as: Mouse
(II) input device 'ImExPS/2 Generic Explorer Mouse', /dev/input/event3 is a pointer caps
(II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.