dmesg - 20171010-hd7660dFGLRX
random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
Linux version 4.13.5-1-MANJARO (builduser@manjaro) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Thu Oct 5 15:24:20 UTC 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000007d2b5fff] usable
BIOS-e820: [mem 0x000000007d2b6000-0x000000007d2e5fff] reserved
BIOS-e820: [mem 0x000000007d2e6000-0x000000007d5a7fff] usable
BIOS-e820: [mem 0x000000007d5a8000-0x000000007d675fff] ACPI NVS
BIOS-e820: [mem 0x000000007d676000-0x000000007e2a5fff] reserved
BIOS-e820: [mem 0x000000007e2a6000-0x000000007e2e6fff] type 20
BIOS-e820: [mem 0x000000007e2e7000-0x000000007e2e7fff] usable
BIOS-e820: [mem 0x000000007e2e8000-0x000000007e4edfff] ACPI NVS
BIOS-e820: [mem 0x000000007e4ee000-0x000000007e960fff] usable
BIOS-e820: [mem 0x000000007e961000-0x000000007efe1fff] reserved
BIOS-e820: [mem 0x000000007efe2000-0x000000007effffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000024effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ESRT=0x7e2a4c18 ACPI=0x7d62c000 ACPI 2.0=0x7d62c000 SMBIOS=0xf04c0 MPS=0xfd480
random: fast init done
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88XM-D3H, BIOS F9 12/25/2015
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x24f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-D5FFF write-protect
D6000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFE0000000 write-back
2 base 0000A0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000024f000000 aka 9456M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xb0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef] mapped at [ffff9860400fd7e0]
esrt: Reserving ESRT space from 0x000000007e2a4c18 to 0x000000007e2a4c50.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff986040098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x152f64000, 0x152f64fff] PGTABLE
BRK [0x152f65000, 0x152f65fff] PGTABLE
BRK [0x152f66000, 0x152f66fff] PGTABLE
BRK [0x152f67000, 0x152f67fff] PGTABLE
BRK [0x152f68000, 0x152f68fff] PGTABLE
BRK [0x152f69000, 0x152f69fff] PGTABLE
BRK [0x152f6a000, 0x152f6afff] PGTABLE
BRK [0x152f6b000, 0x152f6bfff] PGTABLE
BRK [0x152f6c000, 0x152f6cfff] PGTABLE
BRK [0x152f6d000, 0x152f6dfff] PGTABLE
BRK [0x152f6e000, 0x152f6efff] PGTABLE
BRK [0x152f6f000, 0x152f6ffff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x3706b000-0x3782cfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007D62C000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007D62C088 000094 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000007D632910 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170531/tbfadt-658)
ACPI: DSDT 0x000000007D62C1B8 006756 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x000000007D66B080 000040
ACPI: APIC 0x000000007D632A20 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000007D632A98 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000007D632AE0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x000000007D632B20 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: WDRT 0x000000007D632B58 000047 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: IVRS 0x000000007D632BA0 0000C0 (v02 AMD BANTRY 00000001 AMD 00000000)
ACPI: BGRT 0x000000007D632C60 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000007D632C98 000D40 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x000000007D6339D8 0004B7 (v02 AMD BANTRY 00000001 MSFT 04000000)
ACPI: CRAT 0x000000007D633E90 000578 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x000000007D634408 0016E4 (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: SSDT 0x000000007D635AF0 001519 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: SSDT 0x000000007D637010 000ABB (v01 AMD CPMDFDGP 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000024effffff]
NODE_DATA(0) allocated [mem 0x24effb000-0x24effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000024effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000007d2b5fff]
node 0: [mem 0x000000007d2e6000-0x000000007d5a7fff]
node 0: [mem 0x000000007e2e7000-0x000000007e2e7fff]
node 0: [mem 0x000000007e4ee000-0x000000007e960fff]
node 0: [mem 0x000000007efe2000-0x000000007effffff]
node 0: [mem 0x0000000100000000-0x000000024effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000024effffff]
On node 0 totalpages: 1886633
DMA zone: 64 pages used for memmap
DMA zone: 28 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 7977 pages used for memmap
DMA32 zone: 510474 pages, LIFO batch:31
Normal zone: 21440 pages used for memmap
Normal zone: 1372160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7d2b6000-0x7d2e5fff]
PM: Registered nosave memory: [mem 0x7d5a8000-0x7d675fff]
PM: Registered nosave memory: [mem 0x7d676000-0x7e2a5fff]
PM: Registered nosave memory: [mem 0x7e2a6000-0x7e2e6fff]
PM: Registered nosave memory: [mem 0x7e2e8000-0x7e4edfff]
PM: Registered nosave memory: [mem 0x7e961000-0x7efe1fff]
PM: Registered nosave memory: [mem 0x7f000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x7f000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff98628ec00000 s106520 r8192 d32744 u524288
pcpu-alloc: s106520 r8192 d32744 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1857124
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7142044K/7546532K available (6719K kernel code, 1138K rwdata, 2052K rodata, 1336K init, 900K bss, 404488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 28429 entries in 112 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 8448, nr_irqs: 456, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3793.490 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7590.10 BogoMIPS (lpj=12644966)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 24K
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-5800K APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x10, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (30356.61 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x7d5a8000-0x7d675fff] (843776 bytes)
PM: Registering ACPI NVS region [mem 0x7e2e8000-0x7e4edfff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 6:03:21, date: 10/10/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
pci 0000:00:01.0: [1002:9901] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xb0000000-0xbfffffff pref]
pci 0000:00:01.0: reg 0x14: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb44000-0xfeb47fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xfeb48000-0xfeb49fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb51000-0xfeb517ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb50000-0xfeb50fff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb4f000-0xfeb4f0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb4e000-0xfeb4efff]
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb4d000-0xfeb4d0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb4c000-0xfeb4cfff]
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [1002:699f] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.1: [1002:aae0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfe900000-0xfe900fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xd0300000-0xd0303fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:04.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xb0000000-0xfed3ffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
pci 0000:00:01.0: vgaarb: setting as boot VGA device
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0000:00:01.0: vgaarb: no bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x7d2b6000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7d5a8000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7e2e8000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7e961000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f000000-0x7fffffff]
e820: reserve RAM buffer [mem 0x24f000000-0x24fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x80000000-0xafffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0220-0x0227] has been reserved
system 00:03: [io 0x0228-0x0237] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x040b] has been reserved
system 00:07: [io 0x04d6] has been reserved
system 00:07: [io 0x0c00-0x0c01] has been reserved
system 00:07: [io 0x0c14] has been reserved
system 00:07: [io 0x0c50-0x0c51] has been reserved
system 00:07: [io 0x0c52] has been reserved
system 00:07: [io 0x0c6c] has been reserved
system 00:07: [io 0x0c6f] has been reserved
system 00:07: [io 0x0cd0-0x0cd1] has been reserved
system 00:07: [io 0x0cd2-0x0cd3] has been reserved
system 00:07: [io 0x0cd4-0x0cd5] has been reserved
system 00:07: [io 0x0cd6-0x0cd7] has been reserved
system 00:07: [io 0x0cd8-0x0cdf] has been reserved
system 00:07: [io 0x0800-0x089f] has been reserved
system 00:07: [io 0x0b00-0x0b0f] has been reserved
system 00:07: [io 0x0b20-0x0b3f] has been reserved
system 00:07: [io 0x0900-0x090f] has been reserved
system 00:07: [io 0x0910-0x091f] has been reserved
system 00:07: [io 0xfe00-0xfefe] has been reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:07: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:07: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:04.0: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xb0000000-0xfed3ffff window]
pci_bus 0000:00: resource 11 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:03: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:03: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:03: resource 10 [mem 0xb0000000-0xfed3ffff window]
pci_bus 0000:03: resource 11 [mem 0xfed45000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:12.2: PME# does not work under D3, disabling it
pci 0000:00:13.2: PME# does not work under D3, disabling it
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 7944K
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.1 to group 0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Adding device 0000:00:04.0 to group 2
iommu: Adding device 0000:00:10.0 to group 3
iommu: Adding device 0000:00:10.1 to group 3
iommu: Adding device 0000:00:11.0 to group 4
iommu: Adding device 0000:00:12.0 to group 5
iommu: Adding device 0000:00:12.2 to group 5
iommu: Adding device 0000:00:13.0 to group 6
iommu: Adding device 0000:00:13.2 to group 6
iommu: Adding device 0000:00:14.0 to group 7
iommu: Adding device 0000:00:14.2 to group 7
iommu: Adding device 0000:00:14.3 to group 7
iommu: Adding device 0000:00:14.4 to group 8
iommu: Adding device 0000:00:14.5 to group 9
iommu: Adding device 0000:00:18.0 to group 10
iommu: Adding device 0000:00:18.1 to group 10
iommu: Adding device 0000:00:18.2 to group 10
iommu: Adding device 0000:00:18.3 to group 10
iommu: Adding device 0000:00:18.4 to group 10
iommu: Adding device 0000:00:18.5 to group 10
iommu: Adding device 0000:01:00.0 to group 1
iommu: Adding device 0000:01:00.1 to group 1
iommu: Adding device 0000:02:00.0 to group 2
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0x800000853):
PreF PPR GT IA
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=40 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
io scheduler bfq-sq registered (default)
BFQ I/O-scheduler: v8r12 (with cgroups support)
io scheduler bfq-mq registered
BFQ I/O-scheduler: v8r12 (with cgroups support)
pcieport 0000:00:02.0: Signaling PME with IRQ 25
pcieport 0000:00:04.0: Signaling PME with IRQ 26
efifb: probing for efifb
efifb: framebuffer at 0xb0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x06001119
microcode: CPU1: patch_level=0x06001119
microcode: CPU2: patch_level=0x06001119
microcode: CPU3: patch_level=0x06001119
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (2573657320, 0)->(2708553486, -134896166)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 5:921:63
rtc_cmos 00:05: setting system clock to 2017-10-10 06:03:24 UTC (1507615404)
PM: Checking hibernation image partition /dev/myswap
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1460K
Freeing unused kernel memory: 2044K
i8042: PNP: No PS/2 controller found.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffb6d1c0c71000, 74:d4:35:54:cf:0d, XID 0c900880 IRQ 27
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4f000
SCSI subsystem initialized
libata version 3.00 loaded.
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4d000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
ohci-pci: OHCI PCI platform driver
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
ahci 0000:00:11.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 38
ata2: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51180 irq 39
ata3: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51200 irq 40
ata4: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51280 irq 41
ata5: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51300 irq 42
ata6: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51380 irq 43
ata7: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51400 irq 44
ata8: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51480 irq 45
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb50000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4e000
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb4c000
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
ata7: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-9: SanDisk SD8SBAT128G1122, Z2201000, max UDMA/133
ata2.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SanDisk SD8SBAT1 1000 PQ: 0 ANSI: 5
usb 7-1: new low-speed USB device number 2 using ohci-pci
scsi 4:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 4:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 4:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI removable disk
sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7
sd 4:0:0:0: [sdb] Attached SCSI removable disk
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb7/7-1/7-1:1.0/0003:093A:2510.0001/input/input0
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:12.0-1/input0
raid6: sse2x1 gen() 6897 MB/s
raid6: sse2x1 xor() 4579 MB/s
tsc: Refined TSC clocksource calibration: 3793.101 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d59c5c4cd2, max_idle_ns: 881591082156 ns
raid6: sse2x2 gen() 9166 MB/s
raid6: sse2x2 xor() 7056 MB/s
raid6: sse2x4 gen() 12578 MB/s
raid6: sse2x4 xor() 6220 MB/s
raid6: using algorithm sse2x4 gen() 12578 MB/s
raid6: .... xor() 6220 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device label VAAKOroot devid 1 transid 20688 /dev/sda2
BTRFS: device label VAAKOrootHDD devid 1 transid 1188 /dev/sdb3
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
myswap: loading out-of-tree module taints kernel.
myswap_init (2.0) PAGE_SIZE:4096 HZ:300 p:8 a:4 l:8 ll:8
myswap_iss started
myswap: init: done (read-ahead:32 pages)
myswap_tft started
myswap_open: 1 mode:93 lcfy:0
myswap_release: oc0 mode131165 sc0 pquc0 le1 wc0 lc0 rm0 lcfy:0
myswap_open: 1 mode:31 lcfy:0
myswap_lc_add1: bd:ffff986286829a00 nonrot cur1 new bd:1 MYSWAP1 discard:G512A0
myswap_release: oc0 mode393247 sc0 pquc0 le1 wc0 lc0 rm0 lcfy:0
usb 7-2: new low-speed USB device number 3 using ohci-pci
input: WGBOOME.org myKBDvoy as /devices/pci0000:00/0000:00:12.0/usb7/7-2/7-2:1.0/0003:16C0:27DB.0002/input/input1
hid-generic 0003:16C0:27DB.0002: input,hidraw1: USB HID v1.01 Keyboard [WGBOOME.org myKBDvoy] on usb-0000:00:12.0-2/input0
clocksource: Switched to clocksource tsc
myswap_tft: nofu mode: rmdo:0 pquc:0 soprw:0
myswap_iss_sync: end @0/2553735
myswap_iss_pq: nofu mode: pquc:0 soprw:0 rmdo:0
myswap_add2: usc2553735 szc:10214940 szb:39903
myswap_susp_init
myswap_susp_merge
myswap_susp_fetch: crc mismatch @2553735
myswap_lc_susp_clear
myswap_susp_done sopn:0
myswap_lc_add2: done
myswap_iss_sync: end @0/2553735
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
myswap_open: 1 mode:31 lcfy:0
myswap_rm_add1: done 0
myswap_rmr started
myswap_iss_pq: nofu mode: pquc:0 soprw:0 rmdo:0
myswap_add2: usc2553735 szc:10214940 szb:39903
myswap_iss_pq: nofu mode: pquc:0 soprw:0 rmdo:0
myswap_susp_init
myswap_susp_merge
myswap_susp_rm_parse: cmd:82 crc:2553735 bno:2553735
myswap_susp_fetch: crc mismatch @2553735
myswap_susp_done sopn:0
myswap_iss_sync: end @2553735/2553735
myswap_release: oc0 mode393247 sc0 pquc0 le1 wc0 lc1 rm1 lcfy:0
PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
PM: Marking nosave pages: [mem 0x000a0000-0x000fffff]
PM: Marking nosave pages: [mem 0x7d2b6000-0x7d2e5fff]
PM: Marking nosave pages: [mem 0x7d5a8000-0x7e2e6fff]
PM: Marking nosave pages: [mem 0x7e2e8000-0x7e4edfff]
PM: Marking nosave pages: [mem 0x7e961000-0x7efe1fff]
PM: Marking nosave pages: [mem 0x7f000000-0xffffffff]
PM: Basic memory bitmaps created
myswap_open: 1 mode:31 lcfy:0
myswap_release: oc0 mode393247 sc0 pquc0 le1 wc0 lc1 rm1 lcfy:0
PM: Basic memory bitmaps freed
myswap_open: 1 mode:29 lcfy:0
myswap_release: oc0 mode135197 sc0 pquc0 le1 wc0 lc1 rm1 lcfy:0
BTRFS info (device sda2): disk space caching is enabled
BTRFS info (device sda2): has skinny extents
BTRFS info (device sda2): detected SSD devices, enabling SSD mode
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: multi-user.target: Wants dependency dropin /usr/lib/systemd/system/multi-user.target.wants/hylafax.timer target ../shadow.timer has different name
systemd[1]: /usr/lib/systemd/system/temp-links-catalyst.service:5: Support for option SysVStartPriority= has been removed and it is ignored
systemd[1]: getty.target: Wants dependency dropin /etc/systemd/system/getty.target.wants/getty@tty1.service target /usr/lib/systemd/system/autologin@.service has different name
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on udev Control Socket.
SPL: Loaded module v0.7.0-1
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: Attached scsi generic sg1 type 0
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3793082593 Hz
vboxdrv: Successfully loaded version 5.1.28 (interface 0x002a0000)
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
VBoxPciLinuxInit
BTRFS info (device sda2): use zlib compression
BTRFS info (device sda2): turning on discard
BTRFS info (device sda2): disabling disk space caching
vboxpci: IOMMU found
AMD IOMMUv2 driver by Joerg Roedel
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
[fglrx] Maximum main memory to use for locked dma buffers: 7021 MBytes.
[fglrx] vendor: 1002 device: 9901 revision: 0 count: 1
[fglrx] IOMMU is enabled, CrossFire are not supported on this platform
[fglrx] Disable IOMMU in BIOS options or kernel boot parameters to support CF
[fglrx] ioport: bar 1, base 0xf000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 15.20.3 [Sep 8 2015] with 1 minors
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
acpi device:02: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
acpi device:04: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/LNXVIDEO:01/input/input5
acpi_cpufreq: overriding BIOS provided _PSD data
i8042: PNP: No PS/2 controller found.
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x16
sp5100_tco: I/O address 0x0cd6 already in use
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input7
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input8
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input9
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input10
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input11
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[drm] amdgpu kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
ATPX version 1, functions 0x00000000
myswap_open: 1 mode:93 lcfy:0
Found CRAT image with size=1400
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=4 id_base=16
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=17
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=19
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (b0000000 300000) vs hw (c0000000 10000000)
amdgpu 0000:01:00.0: enabling device (0000 -> 0003)
[drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1DA2:0xE367 0xC7).
[drm] register mmio base: 0xFEA00000
[drm] register mmio size: 262144
[drm] probing gen 2 caps for device 1022:1412 = 700d02/6
[drm] probing mlw for device 1022:1412 = 700d02
ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.PB2.VGA.ATC0, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \_SB.PCI0.PB2.VGA.ATCS, AE_NOT_FOUND (20170531/psparse-550)
[drm] UVD is enabled in VM mode
[drm] VCE enabled in VM mode
myswap_release: oc0 mode131165 sc0 pquc0 le1 wc0 lc1 rm1 lcfy:0
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
myswap_open: 1 mode:29 lcfy:0
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
myswap_release: oc0 mode131101 sc0 pquc0 le1 wc0 lc1 rm1 lcfy:0
myswap_open: 1 mode:31 lcfy:0
myswap_open: 2 mode:131 lcfy:0
hrtimer: interrupt took 10003796 ns
ATOM BIOS: 113-3672E-UO5
[drm] GPU posting now...
[drm] vm size is 64 GB, block size is 13-bit
random: crng init done
mousedev: PS/2 mouse device common for all mice
Adding 10214936k swap on /dev/myswap. Priority:1 extents:1 across:10214936k SSDscFS
ppdev: user-space parallel port driver
amdgpu 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
amdgpu 0000:01:00.0: GTT: 3072M 0x0000000080000000 - 0x000000013FFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 128bits GDDR5
[TTM] Zone kernel: Available graphics memory: 3707878 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 786432, num gpu pages 786432
[drm] PCIE GART of 3072M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
amdgpu: [powerplay] amdgpu: powerplay sw initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD5
[drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4877
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] DVI-D-1
[drm] HPD4
[drm] DDC: 0x4878 0x4878 0x4879 0x4879 0x487a 0x487a 0x487b 0x487b
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000008, cpu addr 0xffff986277a57008
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000018, cpu addr 0xffff986277a57018
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000028, cpu addr 0xffff986277a57028
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000038, cpu addr 0xffff986277a57038
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000048, cpu addr 0xffff986277a57048
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000080000058, cpu addr 0xffff986277a57058
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000068, cpu addr 0xffff986277a57068
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000078, cpu addr 0xffff986277a57078
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000080000088, cpu addr 0xffff986277a57088
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x000000008000009c, cpu addr 0xffff986277a5709c
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000000800000ac, cpu addr 0xffff986277a570ac
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x00000000800000bc, cpu addr 0xffff986277a570bc
[drm] Found UVD firmware Version: 1.79 Family ID: 16
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x000000000082d420, cpu addr 0xffffb6d1c705a420
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000000800000dc, cpu addr 0xffff986277a570dc
amdgpu 0000:01:00.0: fence driver on ring 14 use gpu addr 0x00000000800000ec, cpu addr 0xffff986277a570ec
amdgpu: [powerplay] [AVFS] Something is broken. See log!
amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table!
[drm] ring test on 0 succeeded in 17 usecs
[drm] ring test on 9 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 10 usecs
[drm] ring test on 2 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 12 usecs
[drm] ring test on 6 succeeded in 3 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] ring test on 8 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 7 usecs
[drm] ring test on 11 succeeded in 7 usecs
ZFS: Loaded module v0.7.0-1, ZFS pool version 5000, ZFS filesystem version 5
[drm] ring test on 12 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 13 succeeded in 6 usecs
[drm] ring test on 14 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] fb mappable at 0xC0A37000
[drm] vram apper at 0xC0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
checking generic (b0000000 300000) vs hw (c0000000 10000000)
amdgpu 0000:01:00.0: fb1: amdgpudrmfb frame buffer device
ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
ACPI Error: Method parse/execution failed \_SB.PCI0.PB2.VGA.ATC0, AE_NOT_FOUND (20170531/psparse-550)
ACPI Error: Method parse/execution failed \_SB.PCI0.PB2.VGA.ATCS, AE_NOT_FOUND (20170531/psparse-550)
[drm] Initialized amdgpu 3.18.0 20150101 for 0000:01:00.0 on minor 0
systemd-journald[214]: Received request to flush runtime journal from PID 1
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
clocksource: Switched to clocksource acpi_pm
systemd-journald[214]: Failed to set ACL on /var/log/journal/cc8b63fce9cd47698b004ca5be84afd2/user-1000.journal, ignoring: Operation not supported
it87: Found IT8728F chip at 0x228, revision 3
it87: Beeping is supported
it87: Found IT8728F chip at 0xfff8, revision 15
it87: Beeping is supported
IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=255.255.255.255 LEN=101 TOS=0x00 PREC=0x00 TTL=64 ID=39764 DF PROTO=UDP SPT=54122 DPT=161 LEN=81
IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=255.255.255.255 LEN=101 TOS=0x00 PREC=0x00 TTL=64 ID=39955 DF PROTO=UDP SPT=54122 DPT=161 LEN=81
IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=255.255.255.255 LEN=43 TOS=0x00 PREC=0x00 TTL=64 ID=40052 DF PROTO=UDP SPT=40713 DPT=3289 LEN=23
IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=255.255.255.255 LEN=43 TOS=0x00 PREC=0x00 TTL=64 ID=40328 DF PROTO=UDP SPT=51639 DPT=3289 LEN=23
IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=255.255.255.255 LEN=65 TOS=0x00 PREC=0x00 TTL=64 ID=40444 DF PROTO=UDP SPT=58297 DPT=1124 LEN=45
[fglrx] Firegl kernel thread PID: 2521
[fglrx] Firegl kernel thread PID: 2522
[fglrx] Firegl kernel thread PID: 2523
[fglrx] IRQ 49 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fab4000, size:4000
[fglrx] Reserved FB block: Unshared offset:fab8000, size:548000
[fglrx] Reserved FB block: Unshared offset:2ffed000, size:13000
amdgpu 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[fglrx] ATIF platform detected with notification ID: 0x81
fuse init (API version 7.26)
systemd-journald[214]: Failed to set ACL on /var/log/journal/cc8b63fce9cd47698b004ca5be84afd2/user-1000.journal, ignoring: Operation not supported
perf: interrupt took too long (2762 > 2500), lowering kernel.perf_event_max_sample_rate to 72300
perf: interrupt took too long (3662 > 3452), lowering kernel.perf_event_max_sample_rate to 54600
perf: interrupt took too long (4759 > 4577), lowering kernel.perf_event_max_sample_rate to 42000
perf: interrupt took too long (6107 > 5948), lowering kernel.perf_event_max_sample_rate to 32700
perf: interrupt took too long (7739 > 7633), lowering kernel.perf_event_max_sample_rate to 25800
perf: interrupt took too long (9807 > 9673), lowering kernel.perf_event_max_sample_rate to 20100