dmesg - adf
Linux version 4.11.0-kfd-compute-rocm-rel-1.6-159 (jenkins@jenkins-raptor-10) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #1 SMP Thu Sep 14 07:27:43 CDT 2017
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000080100fff] usable
BIOS-e820: [mem 0x0000000080101000-0x0000000080101fff] ACPI NVS
BIOS-e820: [mem 0x0000000080102000-0x0000000080102fff] reserved
BIOS-e820: [mem 0x0000000080103000-0x000000008cdbafff] usable
BIOS-e820: [mem 0x000000008cdbb000-0x000000008e4fafff] reserved
BIOS-e820: [mem 0x000000008e4fb000-0x000000008e53dfff] ACPI data
BIOS-e820: [mem 0x000000008e53e000-0x000000008eceffff] ACPI NVS
BIOS-e820: [mem 0x000000008ecf0000-0x000000008fa94fff] reserved
BIOS-e820: [mem 0x000000008fa95000-0x000000008fafefff] type 20
BIOS-e820: [mem 0x000000008faff000-0x000000008fafffff] usable
BIOS-e820: [mem 0x000000008fb00000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.50 by American Megatrends
efi: ESRT=0x8fa09d98 ACPI=0x8e508000 ACPI 2.0=0x8e508000 SMBIOS=0x8fa07000 SMBIOS 3.0=0x8fa06000 MPS=0xfcaa0
SMBIOS 3.0.0 present.
DMI: System manufacturer System Product Name/Z170-DELUXE, BIOS 3007 11/29/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x26f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x8fb00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcf10-0x000fcf1f] mapped at [ffff926c000fcf10]
esrt: Reserving ESRT space from 0x000000008fa09d98 to 0x000000008fa09dd0.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff926c00096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x16321f000, 0x16321ffff] PGTABLE
BRK [0x163220000, 0x163220fff] PGTABLE
BRK [0x163221000, 0x163221fff] PGTABLE
BRK [0x163222000, 0x163222fff] PGTABLE
BRK [0x163223000, 0x163223fff] PGTABLE
BRK [0x163224000, 0x163224fff] PGTABLE
BRK [0x163225000, 0x163225fff] PGTABLE
BRK [0x163226000, 0x163226fff] PGTABLE
BRK [0x163227000, 0x163227fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x330a6000-0x3584afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008E508000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000008E5080A8 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000008E532AC8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000008E508200 02A8C5 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000008ECEFC40 000040
ACPI: APIC 0x000000008E532BE0 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000008E532CA0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000008E532CE8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000008E532D28 000390 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: FIDT 0x000000008E5330B8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000008E533158 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000008E5362B0 00253E (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x000000008E5387F0 000038 (v01 INTEL SKL 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000008E538828 000024 (v02 INTEL OEM_RTD3 00001000 INTL 20160422)
ACPI: SSDT 0x000000008E538850 000B13 (v02 INTEL xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x000000008E539368 000042 (v01 INTEL EDK2 00000002 01000013)
ACPI: SSDT 0x000000008E5393B0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: BGRT 0x000000008E53D6E0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: LPIT 0x000000008E53A2E8 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: WSMT 0x000000008E53A380 000028 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000008E53A3A8 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000008E53A648 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x000000008E53D650 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000008E53D688 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000026effffff]
NODE_DATA(0) allocated [mem 0x26effc000-0x26effffff]
Zone ranges:
DMA32 [mem 0x0000000000001000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000026effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x0000000080100fff]
node 0: [mem 0x0000000080103000-0x000000008cdbafff]
node 0: [mem 0x000000008faff000-0x000000008fafffff]
node 0: [mem 0x0000000100000000-0x000000026effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
On node 0 totalpages: 2080087
DMA32 zone: 9014 pages used for memmap
DMA32 zone: 26 pages reserved
DMA32 zone: 576855 pages, LIFO batch:31
Normal zone: 23488 pages used for memmap
Normal zone: 1503232 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x80101000-0x80101fff]
PM: Registered nosave memory: [mem 0x80102000-0x80102fff]
PM: Registered nosave memory: [mem 0x8cdbb000-0x8e4fafff]
PM: Registered nosave memory: [mem 0x8e4fb000-0x8e53dfff]
PM: Registered nosave memory: [mem 0x8e53e000-0x8eceffff]
PM: Registered nosave memory: [mem 0x8ecf0000-0x8fa94fff]
PM: Registered nosave memory: [mem 0x8fa95000-0x8fafefff]
PM: Registered nosave memory: [mem 0x8fb00000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 38 pages/cpu @ffff926e6ec00000 s115416 r8192 d32040 u262144
pcpu-alloc: s115416 r8192 d32040 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2047559
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7851492K/8320348K available (8622K kernel code, 1454K rwdata, 3784K rodata, 1588K init, 1132K bss, 468856K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:2048 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 4000.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8016.00 BogoMIPS (lpj=16032000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170119
ACPI: 9 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K
ftrace: allocating 33624 entries in 132 pages
smpboot: Max logical packages: 2
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64135.21 BogoMIPS)
sched_clock: Marking stable (652000000, 0)->(685463335, -33463335)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x80101000-0x80101fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8e53e000-0x8eceffff] (8069120 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 17:32:07, date: 10/10/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 35 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF926E64F91000 0007DD (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF926E64F99A00 000130 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF926E64F99C00 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF926E64F91800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF926E64F99E00 000197 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdfe30000-0xdfe3ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdfe4d000-0xdfe4dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdfe48000-0xdfe49fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdfe4c000-0xdfe4c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdfe4b000-0xdfe4b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdfe44000-0xdfe47fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdfe40000-0xdfe43fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdfe20000-0xdfe2ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdfe4a000-0xdfe4a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdfe00000-0xdfe1ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:01:00.0: [1002:6649] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xdfd00000-0xdfd3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xdfd40000-0xdfd5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [1002:aac0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdfd60000-0xdfd63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd07fffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xdfc00000-0xdfc07fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:04:00.0: [1b21:1187] type 01 class 0x060400
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04-0c]
pci 0000:00:1c.2: bridge window [io 0xc000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xdf400000-0xdf9fffff]
pci 0000:05:01.0: [1b21:1187] type 01 class 0x060400
pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
pci 0000:05:02.0: [1b21:1187] type 01 class 0x060400
pci 0000:05:02.0: PME# supported from D0 D3hot D3cold
pci 0000:05:03.0: [1b21:1187] type 01 class 0x060400
pci 0000:05:03.0: PME# supported from D0 D3hot D3cold
pci 0000:05:04.0: [1b21:1187] type 01 class 0x060400
pci 0000:05:04.0: PME# supported from D0 D3hot D3cold
pci 0000:05:05.0: [1b21:1187] type 01 class 0x060400
pci 0000:05:05.0: PME# supported from D0 D3hot D3cold
pci 0000:05:06.0: [1b21:1187] type 01 class 0x060400
pci 0000:05:06.0: PME# supported from D0 D3hot D3cold
pci 0000:05:07.0: [1b21:1187] type 01 class 0x060400
pci 0000:05:07.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PCI bridge to [bus 05-0c]
pci 0000:04:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:04:00.0: bridge window [mem 0xdf400000-0xdf9fffff]
pci 0000:05:01.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [14e4:43a0] type 00 class 0x028000
pci 0000:07:00.0: reg 0x10: [mem 0xdf600000-0xdf607fff 64bit]
pci 0000:07:00.0: reg 0x18: [mem 0xdf400000-0xdf5fffff 64bit]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:02.0: PCI bridge to [bus 07]
pci 0000:05:02.0: bridge window [mem 0xdf400000-0xdf6fffff]
pci 0000:08:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:08:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:08:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:08:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:08:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:08:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:08:00.0: reg 0x24: [mem 0xdf900000-0xdf9001ff]
pci 0000:05:03.0: PCI bridge to [bus 08]
pci 0000:05:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:05:03.0: bridge window [mem 0xdf900000-0xdf9fffff]
pci 0000:05:04.0: PCI bridge to [bus 09]
pci 0000:05:05.0: PCI bridge to [bus 0a]
pci 0000:0b:00.0: [8086:1539] type 00 class 0x020000
pci 0000:0b:00.0: reg 0x10: [mem 0xdf800000-0xdf81ffff]
pci 0000:0b:00.0: reg 0x18: [io 0xc000-0xc01f]
pci 0000:0b:00.0: reg 0x1c: [mem 0xdf820000-0xdf823fff]
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:06.0: PCI bridge to [bus 0b]
pci 0000:05:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:05:06.0: bridge window [mem 0xdf800000-0xdf8fffff]
pci 0000:05:07.0: PCI bridge to [bus 0c]
pci 0000:0d:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:0d:00.0: reg 0x10: [mem 0xdfb00000-0xdfb07fff 64bit]
pci 0000:0d:00.0: PME# supported from D3hot D3cold
pci 0000:0d:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:0e:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:0e:00.0: reg 0x10: [mem 0xdfa00000-0xdfa07fff 64bit]
pci 0000:0e:00.0: PME# supported from D3hot D3cold
pci 0000:0e:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 0e]
pci 0000:00:1c.6: bridge window [mem 0xdfa00000-0xdfafffff]
pci 0000:00:1d.0: PCI bridge to [bus 0f]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x80101000-0x83ffffff]
e820: reserve RAM buffer [mem 0x8cdbb000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8fb00000-0x8fffffff]
e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0xfe00-0xfefe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 0f] add_size 1000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0f] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0f] add_size 200000 add_align 100000
pci 0000:00:1b.0: BAR 14: assigned [mem 0x90000000-0x901fffff]
pci 0000:00:1b.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref]
pci 0000:00:1d.0: BAR 14: assigned [mem 0x90400000-0x905fffff]
pci 0000:00:1d.0: BAR 15: assigned [mem 0x90600000-0x907fffff 64bit pref]
pci 0000:00:1b.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1d.0: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd07fffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1b.0: bridge window [mem 0x90000000-0x901fffff]
pci 0000:00:1b.0: bridge window [mem 0x90200000-0x903fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:05:01.0: PCI bridge to [bus 06]
pci 0000:05:02.0: PCI bridge to [bus 07]
pci 0000:05:02.0: bridge window [mem 0xdf400000-0xdf6fffff]
pci 0000:05:03.0: PCI bridge to [bus 08]
pci 0000:05:03.0: bridge window [io 0xd000-0xdfff]
pci 0000:05:03.0: bridge window [mem 0xdf900000-0xdf9fffff]
pci 0000:05:04.0: PCI bridge to [bus 09]
pci 0000:05:05.0: PCI bridge to [bus 0a]
pci 0000:05:06.0: PCI bridge to [bus 0b]
pci 0000:05:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:05:06.0: bridge window [mem 0xdf800000-0xdf8fffff]
pci 0000:05:07.0: PCI bridge to [bus 0c]
pci 0000:04:00.0: PCI bridge to [bus 05-0c]
pci 0000:04:00.0: bridge window [io 0xc000-0xdfff]
pci 0000:04:00.0: bridge window [mem 0xdf400000-0xdf9fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04-0c]
pci 0000:00:1c.2: bridge window [io 0xc000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xdf400000-0xdf9fffff]
pci 0000:00:1c.4: PCI bridge to [bus 0d]
pci 0000:00:1c.4: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:00:1c.6: PCI bridge to [bus 0e]
pci 0000:00:1c.6: bridge window [mem 0xdfa00000-0xdfafffff]
pci 0000:00:1d.0: PCI bridge to [bus 0f]
pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.0: bridge window [mem 0x90400000-0x905fffff]
pci 0000:00:1d.0: bridge window [mem 0x90600000-0x907fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd07fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x90000000-0x901fffff]
pci_bus 0000:02: resource 2 [mem 0x90200000-0x903fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xdfc00000-0xdfcfffff]
pci_bus 0000:04: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xdf400000-0xdf9fffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xdf400000-0xdf9fffff]
pci_bus 0000:07: resource 1 [mem 0xdf400000-0xdf6fffff]
pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:08: resource 1 [mem 0xdf900000-0xdf9fffff]
pci_bus 0000:0b: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:0b: resource 1 [mem 0xdf800000-0xdf8fffff]
pci_bus 0000:0d: resource 1 [mem 0xdfb00000-0xdfbfffff]
pci_bus 0000:0e: resource 1 [mem 0xdfa00000-0xdfafffff]
pci_bus 0000:0f: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0f: resource 1 [mem 0x90400000-0x905fffff]
pci_bus 0000:0f: resource 2 [mem 0x90600000-0x907fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 40596K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7bd3f000-0x7fd3f000] (64MB) mapped at [ffff926c7bd3f000-ffff926c7fd3efff]
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39c5e21a6f1, max_idle_ns: 440795312983 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1507656727.148:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=21 bucket_order=0
zbud: loaded
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
io scheduler mq-deadline registered
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.11.0-kfd-compute-rocm-rel-1.6-159 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.11.0-kfd-compute-rocm-rel-1.6-159 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.11.0-kfd-compute-rocm-rel-1.6-159 xhci-hcd
usb usb3: SerialNumber: 0000:03:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.11.0-kfd-compute-rocm-rel-1.6-159 xhci-hcd
usb usb4: SerialNumber: 0000:03:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:0d:00.0: xHCI Host Controller
xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0d:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.11.0-kfd-compute-rocm-rel-1.6-159 xhci-hcd
usb usb5: SerialNumber: 0000:0d:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:0d:00.0: xHCI Host Controller
xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.11.0-kfd-compute-rocm-rel-1.6-159 xhci-hcd
usb usb6: SerialNumber: 0000:0d:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:0e:00.0: xHCI Host Controller
xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:0e:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 4.11.0-kfd-compute-rocm-rel-1.6-159 xhci-hcd
usb usb7: SerialNumber: 0000:0e:00.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:0e:00.0: xHCI Host Controller
xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 8
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.11.0-kfd-compute-rocm-rel-1.6-159 xhci-hcd
usb usb8: SerialNumber: 0000:0e:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x506e3, pf=0x2, revision=0x9e
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6396fa15dc127684c3f9379ed4bf44f22741381c'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 5:58:542
console [netcon0] enabled
netconsole: network logging started
rtc_cmos 00:03: setting system clock to 2017-10-10 17:32:08 UTC (1507656728)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1588K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1604K
Freeing unused kernel memory: 312K
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
hidraw: raw HID events driver (C) Jiri Kosina
wmi: Mapper loaded
ahci 0000:00:17.0: version 3.0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
dca service started, version 1.12.1
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
kfd kfd: Initialized module
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
radeon 0000:01:00.0: CIK support disabled by module param
[drm] amdgpu kernel modesetting enabled.
[drm] initializing kernel modesetting (BONAIRE 0x1002:0x6649 0x1002:0x030C 0x00).
amdgpu 0000:01:00.0: valid rang is between 4 and 9
[drm] register mmio base: 0xDFD00000
[drm] register mmio size: 262144
[drm] probing gen 2 caps for device 8086:1901 = 261ad03/e
[drm] probing mlw for device 8086:1901 = 261ad03
ATOM BIOS: 113-C5870100-102
[drm] GPU post is not needed
[drm] Changing default dispclk from 600Mhz to 625Mhz
[drm] vm size is 64 GB, block size is 13-bit, fragment size is 4-bit
amdgpu 0000:01:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
amdgpu 0000:01:00.0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 128bits GDDR5
[TTM] Zone kernel: Available graphics memory: 7599262 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 7915M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400040000).
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
[drm] Internal thermal controller with fan control
[drm] amdgpu: dpm initialized
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000000400010, cpu addr 0xffff926e5b18d010
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000000400020, cpu addr 0xffff926e5b18d020
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000000400030, cpu addr 0xffff926e5b18d030
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000000400040, cpu addr 0xffff926e5b18d040
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000000400050, cpu addr 0xffff926e5b18d050
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000400060, cpu addr 0xffff926e5b18d060
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000000400070, cpu addr 0xffff926e5b18d070
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000000400080, cpu addr 0xffff926e5b18d080
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000000400090, cpu addr 0xffff926e5b18d090
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x00000000004000a0, cpu addr 0xffff926e5b18d0a0
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000000004000b0, cpu addr 0xffff926e5b18d0b0
[drm] Found UVD firmware Version: 1.64 Family ID: 9
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x000000f40010bd30, cpu addr 0xffffb51fc1e38d30
[drm] Found VCE firmware Version: 50.10 Binary ID: 2
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x00000000004000d0, cpu addr 0xffff926e5b18d0d0
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000000004000e0, cpu addr 0xffff926e5b18d0e0
[drm] PCIE gen 3 link speeds already enabled
[drm] DAL is enabled
[drm] DC: create_links: connectors_num: physical:4, virtual:0
[drm] Connector[0] description:signal 32
[drm] Using channel: CHANNEL_ID_DDC1 [1]
[drm] Connector[1] description:signal 32
[drm] Using channel: CHANNEL_ID_DDC2 [2]
[drm] Connector[2] description:signal 32
[drm] Using channel: CHANNEL_ID_DDC3 [3]
[drm] Connector[3] description:signal 32
[drm] Using channel: CHANNEL_ID_DDC4 [4]
usb 1-7: new full-speed USB device number 2 using xhci_hcd
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdfe4b000 port 0xdfe4b100 irq 154
ata2: SATA max UDMA/133 abar m2048@0xdfe4b000 port 0xdfe4b180 irq 154
ata3: SATA max UDMA/133 abar m2048@0xdfe4b000 port 0xdfe4b200 irq 154
ata4: SATA max UDMA/133 abar m2048@0xdfe4b000 port 0xdfe4b280 irq 154
ata5: SATA max UDMA/133 abar m2048@0xdfe4b000 port 0xdfe4b300 irq 154
ata6: SATA max UDMA/133 abar m2048@0xdfe4b000 port 0xdfe4b380 irq 154
ahci 0000:08:00.0: SSS flag set, parallel bus scan disabled
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ahci 0000:08:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xdf900000 port 0xdf900100 irq 17
ata8: SATA max UDMA/133 abar m512@0xdf900000 port 0xdf900180 irq 17
[drm] Display Core initialized
[drm] amdgpu: freesync_module init done ffff926e5bb5f220.
[drm] [Detect] [DP][ConnIdx:0] Rx Caps: 11 0A 82 41 00 03 01 81 00 00 00 00 18 00 00 ^
[drm] [LKTN] [DP][ConnIdx:0] HBRx2 pass VS=0, PE=0^
[drm] SADs count is: -2, don't need to read it
[drm] [Detect] [DP][ConnIdx:0] DELL U2410: [Block 0] 00 FF FF FF FF FF FF 00 10 AC 14 F0 4C 34 37 38 24 15 01 03 6E 34 20 78 EE 1E C5 AE 4F 34 B1 26 0E 50 54 A5 4B 00 81 80 A9 40 D1 00 71 4F 01 01 01 01 01 01 01 01 28 3C 80 A0 70 B0 23 40 30 20 36 00 06 44 21 00 00 1A 00 00 00 FF 00 43 35 39 32 4D 31 39 31 38 37 34 4C 0A 00 00 00 FC 00 44 45 4C 4C 20 55 32 34 31 30 0A 20 20 00 00 00 FD 00 38 4C 1E 51 11 00 0A 20 20 20 20 20 20 00 9F ^
[drm] dc_link_detect: manufacturer_id = AC10, product_id = F014, serial_number = 3837344C, manufacture_week = 36, manufacture_year = 21, display_name = DELL U2410, speaker_flag = 0, audio_mode_count = 0
[drm] link=0, dc_sink_in=ffff926e5b4a0800 is now Connected
[drm] DCHPD: connector_id=0: Old sink= (null) New sink=ffff926e5b4a0800
[drm] link=1, dc_sink_in= (null) is now Disconnected
[drm] DCHPD: connector_id=1: dc_sink didn't change.
[drm] link=2, dc_sink_in= (null) is now Disconnected
[drm] DCHPD: connector_id=2: dc_sink didn't change.
[drm] link=3, dc_sink_in= (null) is now Disconnected
[drm] DCHPD: connector_id=3: dc_sink didn't change.
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] KMS initialized.
amdgpu 0000:01:00.0: CU info asic_type [0x5] not supported
[drm] ring test on 0 succeeded in 6 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 17 usecs
[drm] ring test on 3 succeeded in 11 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 3 usecs
[drm] ring test on 6 succeeded in 17 usecs
[drm] ring test on 7 succeeded in 17 usecs
[drm] ring test on 8 succeeded in 17 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
usb 1-7: New USB device found, idVendor=0b05, idProduct=180a
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7: Product: BCM20702A0
usb 1-7: Manufacturer: Broadcom Corp
usb 1-7: SerialNumber: 80A589A0408B
[drm] ring test on 11 succeeded in 1 usecs
[drm] UVD initialized successfully.
pps pps0: new PPS source ptp0
igb 0000:0b:00.0: added PHC on eth0
igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:0b:00.0: eth0: (PCIe:2.5Gb/s:Width x1) d0:17:c2:ab:9f:f5
igb 0000:0b:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:0b:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:0b:00.0 enp11s0: renamed from eth0
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
usb 7-1: new low-speed USB device number 2 using xhci_hcd
[drm] ring test on 12 succeeded in 9 usecs
[drm] ring test on 13 succeeded in 1 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] fb mappable at 0xC02A9000
[drm] vram apper at 0xC0000000
[drm] size 9216000
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
[drm] Atomic commit: SET crtc id 0: [ffff926e5c501000]
[drm] dc_commit_streams: 1 streams
[drm] core_stream 0x5b602c00: src: 0, 0, 1920, 1200; dst: 0, 0, 1920, 1200, colorSpace:1
[drm] pix_clk_khz: 154000, h_total: 2080, v_total: 1235, pixelencoder:1, displaycolorDepth:2
[drm] link: 0
[drm] dce_get_required_clocks_state: clocks unsupported
[drm] Link: 0 eDP panel mode supported: 0 eDP panel mode enabled: 0
[drm] [LKTN] [DP][ConnIdx:0] HBRx2 pass VS=0, PE=0^
[drm] [Mode] [DP][ConnIdx:0] {1920x1200, 2080x1235@154000Khz}^
Console: switching to colour frame buffer device 240x75
ata7: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata3.00: ATA-8: WDC WD5000AAKS-00A7B2, 01.03B01, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 3B01 PQ: 0 ANSI: 5
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) d0:17:c2:ab:9f:f4
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.18.0 20150101 for 0000:01:00.0 on minor 0
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
usb 7-1: New USB device found, idVendor=0d3d, idProduct=0040
usb 7-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 7-1: Product: USB CAT5
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB CAT5 as /devices/pci0000:00/0000:00:1c.6/0000:0e:00.0/usb7/7-1/7-1:1.0/0003:0D3D:0040.0001/input/input6
clocksource: Switched to clocksource tsc
hid-generic 0003:0D3D:0040.0001: input,hidraw0: USB HID v1.00 Keyboard [USB CAT5] on usb-0000:0e:00.0-1/input0
input: USB CAT5 as /devices/pci0000:00/0000:00:1c.6/0000:0e:00.0/usb7/7-1/7-1:1.1/0003:0D3D:0040.0002/input/input7
hid-generic 0003:0D3D:0040.0002: input,hidraw1: USB HID v1.00 Mouse [USB CAT5] on usb-0000:0e:00.0-1/input1
ata8: SATA link down (SStatus 0 SControl 300)
random: fast init done
random: crng init done
usb 7-1: USB disconnect, device number 2
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on Syslog Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice System Slice.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
usb 7-1: new low-speed USB device number 3 using xhci_hcd
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[312]: Received request to flush runtime journal from PID 1
usb 7-1: New USB device found, idVendor=0d3d, idProduct=0040
usb 7-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 7-1: Product: USB CAT5
input: USB CAT5 as /devices/pci0000:00/0000:00:1c.6/0000:0e:00.0/usb7/7-1/7-1:1.0/0003:0D3D:0040.0003/input/input8
hid-generic 0003:0D3D:0040.0003: input,hidraw0: USB HID v1.00 Keyboard [USB CAT5] on usb-0000:0e:00.0-1/input0
input: USB CAT5 as /devices/pci0000:00/0000:00:1c.6/0000:0e:00.0/usb7/7-1/7-1:1.1/0003:0D3D:0040.0004/input/input9
hid-generic 0003:0D3D:0040.0004: input,hidraw1: USB HID v1.00 Mouse [USB CAT5] on usb-0000:0e:00.0-1/input1
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
bcma-pci-bridge 0000:07:00.0: enabling device (0000 -> 0002)
bcma: bus0: Found chip with id 0x4360, rev 0x03 and package 0x00
bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0)
bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0)
bcma: bus0: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0)
bcma: bus0: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0)
bcma: bus0: Core 4 found: USB 2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0)
bcma: bus0: Using fallback SPROM failed (err -2)
bcma: bus0: No SPROM available
bcma: bus0: Bus registered
kvm: disabled by bios
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
usbcore: registered new interface driver btusb
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: tester-System
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-180a.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-180a.hcd not found
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input24
asus_wmi: Number of fans: 1
b43-phy0: Broadcom 4360 WLAN found (core revision 42)
bcma: bus0: HT force timeout
bcma: bus0: PLL enable timeout
b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1)
b43: probe of bcma0:1 failed with error -95
Broadcom 43xx driver loaded [ Features: PNL ]
Adding 8319996k swap on /dev/sda3. Priority:-1 extents:1 across:8319996k FS
audit: type=1400 audit(1507656743.659:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ippusbxd" pid=860 comm="apparmor_parser"
audit: type=1400 audit(1507656743.679:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=853 comm="apparmor_parser"
audit: type=1400 audit(1507656743.679:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=853 comm="apparmor_parser"
audit: type=1400 audit(1507656743.679:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=853 comm="apparmor_parser"
audit: type=1400 audit(1507656743.679:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=853 comm="apparmor_parser"
audit: type=1400 audit(1507656743.679:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=862 comm="apparmor_parser"
audit: type=1400 audit(1507656743.679:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=858 comm="apparmor_parser"
audit: type=1400 audit(1507656743.679:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=859 comm="apparmor_parser"
audit: type=1400 audit(1507656743.679:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=859 comm="apparmor_parser"
audit: type=1400 audit(1507656743.679:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd//third_party" pid=859 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp11s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp11s0: link is not ready
igb 0000:0b:00.0 enp11s0: igb: enp11s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp11s0: link becomes ready
kauditd_printk_skb: 13 callbacks suppressed
audit: type=1400 audit(1507656751.759:25): apparmor="DENIED" operation="open" profile="/usr/lib/NetworkManager/nm-dhcp-helper" name="/usr/local/lib/libz.so.1.2.11" pid=1141 comm="nm-dhcp-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit: type=1400 audit(1507656781.855:26): apparmor="STATUS" operation="profile_load" name="docker-default" pid=1974 comm="apparmor_parser"
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
audit: type=1400 audit(1507656797.131:27): apparmor="DENIED" operation="open" profile="/usr/lib/NetworkManager/nm-dhcp-helper" name="/usr/local/lib/libz.so.1.2.11" pid=2260 comm="nm-dhcp-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1507656842.139:28): apparmor="DENIED" operation="open" profile="/usr/lib/NetworkManager/nm-dhcp-helper" name="/usr/local/lib/libz.so.1.2.11" pid=2443 comm="nm-dhcp-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1507656887.147:29): apparmor="DENIED" operation="open" profile="/usr/lib/NetworkManager/nm-dhcp-helper" name="/usr/local/lib/libz.so.1.2.11" pid=2622 comm="nm-dhcp-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
igb 0000:0b:00.0 enp11s0: igb: enp11s0 NIC Link is Down
igb 0000:0b:00.0 enp11s0: igb: enp11s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
audit: type=1400 audit(1507656969.199:30): apparmor="DENIED" operation="open" profile="/usr/lib/NetworkManager/nm-dhcp-helper" name="/usr/local/lib/libz.so.1.2.11" pid=2696 comm="nm-dhcp-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1507656980.311:31): apparmor="DENIED" operation="open" profile="/usr/lib/NetworkManager/nm-dhcp-helper" name="/usr/local/lib/libz.so.1.2.11" pid=2746 comm="nm-dhcp-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1507656985.279:32): apparmor="DENIED" operation="open" profile="/usr/lib/NetworkManager/nm-dhcp-helper" name="/usr/local/lib/libz.so.1.2.11" pid=2772 comm="nm-dhcp-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1507657014.775:33): apparmor="DENIED" operation="open" profile="/usr/lib/NetworkManager/nm-dhcp-helper" name="/usr/local/lib/libz.so.1.2.11" pid=2838 comm="nm-dhcp-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
igb 0000:0b:00.0 enp11s0: igb: enp11s0 NIC Link is Down
igb 0000:0b:00.0 enp11s0: igb: enp11s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
audit: type=1400 audit(1507657042.603:34): apparmor="DENIED" operation="open" profile="/usr/lib/NetworkManager/nm-dhcp-helper" name="/usr/local/lib/libz.so.1.2.11" pid=2845 comm="nm-dhcp-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1507657043.367:35): apparmor="DENIED" operation="open" profile="/usr/lib/NetworkManager/nm-dhcp-helper" name="/usr/local/lib/libz.so.1.2.11" pid=3036 comm="nm-dhcp-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1507657043.387:36): apparmor="DENIED" operation="open" profile="/usr/lib/NetworkManager/nm-dhcp-helper" name="/usr/local/lib/libz.so.1.2.11" pid=3050 comm="nm-dhcp-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0