dmesg - AA
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-83-generic (buildd@lgw01-29) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #106-Ubuntu SMP Mon Jun 26 17:54:43 UTC 2017 (Ubuntu 4.4.0-83.106-generic 4.4.70)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
BIOS-e820: [mem 0x00000000cff80000-0x00000000cff8dfff] ACPI data
BIOS-e820: [mem 0x00000000cff8e000-0x00000000cffdffff] ACPI NVS
BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000016fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: System manufacturer P5K/P5K, BIOS 0703 06/26/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x170000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0D0000000 mask FF0000000 uncachable
1 base 0E0000000 mask FE0000000 uncachable
2 base 000000000 mask F00000000 write-back
3 base 100000000 mask FC0000000 write-back
4 base 140000000 mask FE0000000 write-back
5 base 160000000 mask FF0000000 write-back
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 3328MB, range: 256MB, type UC
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 0GB, range: 4GB, type WB
reg 3, base: 4GB, range: 1GB, type WB
reg 4, base: 5GB, range: 512MB, type WB
reg 5, base: 5632MB, range: 256MB, type WB
total RAM covered: 5120M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3328MB, range: 256MB, type UC
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 4GB, range: 2GB, type WB
reg 4, base: 5888MB, range: 256MB, type UC
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
BRK [0x0220c000, 0x0220cfff] PGTABLE
BRK [0x0220d000, 0x0220dfff] PGTABLE
BRK [0x0220e000, 0x0220efff] PGTABLE
BRK [0x0220f000, 0x0220ffff] PGTABLE
BRK [0x02210000, 0x02210fff] PGTABLE
RAMDISK: [mem 0x336e8000-0x35b6bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FBCD0 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000CFF80000 00003C (v01 A_M_I_ OEMRSDT 06000826 MSFT 00000097)
ACPI: FACP 0x00000000CFF80200 000084 (v02 A_M_I_ OEMFACP 06000826 MSFT 00000097)
ACPI: DSDT 0x00000000CFF80440 0090AB (v01 A0871 A0871020 00000020 INTL 20060113)
ACPI: FACS 0x00000000CFF8E000 000040
ACPI: APIC 0x00000000CFF80390 00006C (v01 A_M_I_ OEMAPIC 06000826 MSFT 00000097)
ACPI: MCFG 0x00000000CFF80400 00003C (v01 A_M_I_ OEMMCFG 06000826 MSFT 00000097)
ACPI: OEMB 0x00000000CFF8E040 000081 (v01 A_M_I_ AMI_OEM 06000826 MSFT 00000097)
ACPI: HPET 0x00000000CFF894F0 000038 (v01 A_M_I_ OEMHPET 06000826 MSFT 00000097)
ACPI: OSFR 0x00000000CFF89530 0000B0 (v01 A_M_I_ OEMOSFR 06000826 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000016fffffff]
NODE_DATA(0) allocated [mem 0x16fff7000-0x16fffbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000016fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000cff7ffff]
node 0: [mem 0x0000000100000000-0x000000016fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000016fffffff]
On node 0 totalpages: 1310494
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13246 pages used for memmap
DMA32 zone: 847744 pages, LIFO batch:31
Normal zone: 7168 pages used for memmap
Normal zone: 458752 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xcff80000-0xcff8dfff]
PM: Registered nosave memory: [mem 0xcff8e000-0xcffdffff]
PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88016fc00000 s98264 r8192 d28712 u524288
pcpu-alloc: s98264 r8192 d28712 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1289995
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 5037212K/5241976K available (8469K kernel code, 1294K rwdata, 3984K rodata, 1488K init, 1316K bss, 204764K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:456 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3005.688 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6011.37 BogoMIPS (lpj=12022752)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 1 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff820b9000 - ffffffff820c1000)
ftrace: allocating 32129 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0xa)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (12022.75 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffdffff] (335872 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 19:41:37, date: 10/05/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880169396800 0001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880169396A00 000143 (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xb800-0xb81f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xb880-0xb89f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xbc00-0xbc1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfe7ffc00-0xfe7fffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfe7f8000-0xfe7fbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xb080-0xb09f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xb400-0xb41f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xb480-0xb49f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfe7ff800-0xfe7ffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xa000-0xa007]
pci 0000:00:1f.2: reg 0x14: [io 0x9c00-0x9c03]
pci 0000:00:1f.2: reg 0x18: [io 0x9880-0x9887]
pci 0000:00:1f.2: reg 0x1c: [io 0x9800-0x9803]
pci 0000:00:1f.2: reg 0x20: [io 0x9480-0x948f]
pci 0000:00:1f.2: reg 0x24: [io 0x9400-0x940f]
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfe7ff400-0xfe7ff4ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xb000-0xb007]
pci 0000:00:1f.5: reg 0x14: [io 0xac00-0xac03]
pci 0000:00:1f.5: reg 0x18: [io 0xa880-0xa887]
pci 0000:00:1f.5: reg 0x1c: [io 0xa800-0xa803]
pci 0000:00:1f.5: reg 0x20: [io 0xa480-0xa48f]
pci 0000:00:1f.5: reg 0x24: [io 0xa400-0xa40f]
pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfe8c0000-0xfe8dffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xc000-0xc0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfe8a0000-0xfe8bffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfe8fc000-0xfe8fffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
pci 0000:03:00.0: reg 0x24: [mem 0xfeafe000-0xfeafffff]
pci 0000:03:00.0: reg 0x30: [mem 0xfeae0000-0xfeaeffff pref]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
pci 0000:03:00.1: reg 0x10: [io 0xdc00-0xdc07]
pci 0000:03:00.1: reg 0x14: [io 0xd880-0xd883]
pci 0000:03:00.1: reg 0x18: [io 0xd800-0xd807]
pci 0000:03:00.1: reg 0x1c: [io 0xd480-0xd483]
pci 0000:03:00.1: reg 0x20: [io 0xd400-0xd40f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:02:00.0: [1969:1048] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xfe9c0000-0xfe9fffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xfe9a0000-0xfe9bffff pref]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:05:01.0: [1102:0002] type 00 class 0x040100
pci 0000:05:01.0: reg 0x10: [io 0xe880-0xe89f]
pci 0000:05:01.0: supports D1 D2
pci 0000:05:01.1: [1102:7002] type 00 class 0x098000
pci 0000:05:01.1: reg 0x10: [io 0xec00-0xec07]
pci 0000:05:01.1: supports D1 D2
pci 0000:05:02.0: [168c:002d] type 00 class 0x028000
pci 0000:05:02.0: reg 0x10: [mem 0xfebf0000-0xfebfffff]
pci 0000:05:02.0: PME# supported from D0 D3hot
pci 0000:05:03.0: [1106:3044] type 00 class 0x0c0010
pci 0000:05:03.0: reg 0x10: [mem 0xfebef800-0xfebeffff]
pci 0000:05:03.0: reg 0x14: [io 0xe800-0xe87f]
pci 0000:05:03.0: supports D2
pci 0000:05:03.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0290-0x0297] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x0800-0x087f] could not be reserved
system 00:03: [io 0x0480-0x04bf] has been reserved
system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved
system 00:03: [mem 0xffa00000-0xffafffff] has been reserved
system 00:03: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:03: [mem 0xffe00000-0xffefffff] has been reserved
system 00:03: [mem 0xfff00000-0xfffffffe] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000 add_align 100000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 400000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x004fffff] res_to_dev_res add_size 400000 min_align 100000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.5: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 02]
pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff]
pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:05: resource 8 [mem 0xd0000000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue
pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 37392K (ffff8800336e8000 - ffff880035b6c000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbf80000-0xcff80000] (64MB) mapped at [ffff8800cbf80000-ffff8800cff7ffff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1507232497.708:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
pcieport 0000:00:1c.5: enabling device (0106 -> 0107)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001000000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-83-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe7ff800
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-83-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-83-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0-83-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.4.0-83-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.4.0-83-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.4.0-83-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 4.4.0-83-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 35105354eb779045e4d9ad793dead39d5ee93f76'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 5:548:697
rtc_cmos 00:01: setting system clock to 2017-10-05 19:41:38 UTC (1507232498)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-1: New USB device found, idVendor=1058, idProduct=0748
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 1-1: Product: My Passport 0748
usb 1-1: Manufacturer: Western Digital
usb 1-1: SerialNumber: 575832314336323537383536
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: ATAPI iHAS124 E, 4L06, max UDMA/100
ata3.00: ATA-9: SanDisk SDSSDP064G, 3.1.0, max UDMA/133
ata3.00: 123091920 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/100
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 123091920 512-byte logical blocks: (63.0 GB/58.7 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda3 < sda5 sda6 >
scsi 3:0:0:0: CD-ROM ATAPI iHAS124 E 4L06 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] Attached SCSI disk
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 1488K (ffffffff81f45000 - ffffffff820b9000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1760K (ffff880001848000 - ffff880001a00000)
Freeing unused kernel memory: 112K (ffff880001de4000 - ffff880001e00000)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[drm] Initialized drm 1.1.0 20060810
ahci 0000:03:00.0: version 3.0
atl1 0000:02:00.0: version 2.1.3
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi host4: ahci
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
scsi host5: ahci
ata5: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
ata6: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
scsi host6: pata_jmicron
[drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x174B:0xE225).
[drm] register mmio base: 0xFE8C0000
[drm] register mmio size: 131072
ATOM BIOS: HD5450
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
scsi host7: pata_jmicron
ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[TTM] Zone kernel: Available graphics memory: 2538998 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CEDAR Microcode
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000000025E000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880034cc4c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880034cc4c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000101c418
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
atl1 0000:02:00.0 enp2s0: renamed from eth0
ata7.00: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
ata7.00: 240121728 sectors, multi 0: LBA
ata7.01: ATA-6: ST3120022A, 3.04, max UDMA/100
ata7.01: 234441648 sectors, multi 0: LBA48
ata7.00: configured for UDMA/100
usb 4-2: new low-speed USB device number 2 using uhci_hcd
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 3005.554 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b52c43fc35, max_idle_ns: 440795331618 ns
ata7.01: configured for UDMA/100
scsi 6:0:0:0: Direct-Access ATA Maxtor 6Y120L0 1BW0 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdb] 240121728 512-byte logical blocks: (123 GB/114 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
scsi 6:0:1:0: Direct-Access ATA ST3120022A 3.04 PQ: 0 ANSI: 5
sd 6:0:1:0: [sdc] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 6:0:1:0: Attached scsi generic sg3 type 0
sd 6:0:1:0: [sdc] Write Protect is off
sd 6:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 6:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 6:0:0:0: [sdb] Attached SCSI disk
sd 6:0:1:0: [sdc] Attached SCSI disk
firewire_core 0000:05:03.0: created device fw0: GUID 0011d80001642e54, S400
usb 4-2: New USB device found, idVendor=093a, idProduct=2510
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB OPTICAL MOUSE
usb 4-2: Manufacturer: PIXART
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/0003:093A:2510.0001/input/input3
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1a.1-2/input0
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi host8: usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD4
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] fb mappable at 0xD045F000
[drm] vram apper at 0xD0000000
[drm] size 7299072
[drm] fb depth is 24
[drm] pitch is 6912
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
clocksource: Switched to clocksource tsc
scsi 8:0:0:0: Direct-Access WD My Passport 0748 1015 PQ: 0 ANSI: 6
scsi 8:0:0:1: Enclosure WD SES Device 1015 PQ: 0 ANSI: 6
sd 8:0:0:0: Attached scsi generic sg4 type 0
scsi 8:0:0:1: Attached scsi generic sg5 type 13
sd 8:0:0:0: [sdd] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 47 00 10 08
sd 8:0:0:0: [sdd] No Caching mode page found
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
ses 8:0:0:1: Attached Enclosure device
sd 8:0:0:0: [sdd] Attached SCSI disk
random: nonblocking pool is initialized
floppy0: no floppy controllers found
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Set console keymap...
systemd[1]: Started Read required files in advance.
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Service...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Uncomplicated firewall.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd-journald[237]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
audit: type=1400 audit(1507225303.161:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=561 comm="apparmor_parser"
audit: type=1400 audit(1507225303.161:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=561 comm="apparmor_parser"
audit: type=1400 audit(1507225303.161:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=561 comm="apparmor_parser"
audit: type=1400 audit(1507225303.161:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=561 comm="apparmor_parser"
audit: type=1400 audit(1507225303.165:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=560 comm="apparmor_parser"
audit: type=1400 audit(1507225303.165:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=560 comm="apparmor_parser"
audit: type=1400 audit(1507225303.177:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=580 comm="apparmor_parser"
audit: type=1400 audit(1507225303.177:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=580 comm="apparmor_parser"
audit: type=1400 audit(1507225303.181:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=581 comm="apparmor_parser"
gameport gameport0: EMU10K1 is pci0000:05:01.1/gameport0, io 0xec00, speed 1044kHz
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC883: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
intel_powerclamp: No package C-state available
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90001ba0000, irq=18
gpio_ich: GPIO from 451 to 511 on gpio_ich
Adding 4192252k swap on /dev/sda6. Priority:-1 extents:1 across:4192252k SSFS
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
cfg80211: Regulatory domain changed to country: CN
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
cgroup: new mount options do not match the existing superblock, will be ignored
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
floppy0: no floppy controllers found
work still pending
wlan0: authenticate with a0:21:b7:e5:53:af
wlan0: send auth to a0:21:b7:e5:53:af (try 1/3)
wlan0: authenticated
wlan0: associate with a0:21:b7:e5:53:af (try 1/3)
wlan0: RX AssocResp from a0:21:b7:e5:53:af (capab=0x411 status=0 aid=5)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 2 processor cores
vboxdrv: fAsync=0 offMin=0x1cb offMax=0x7ce
vboxdrv: TSC mode is Synchronous, tentative frequency 3005548226 Hz
vboxdrv: Successfully loaded version 5.0.40_Ubuntu (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
UDF-fs: INFO Mounting volume 'ANOTHER_WOMAN', timestamp 2002/06/24 16:35 (1078)