dmesg - 1
microcode: microcode updated early to revision 0xba, date = 2010-10-03
Linux version 4.10.0-19-generic (buildd@lcy01-13) (gcc version 6.3.0 20170321 (Ubuntu 6.3.0-10ubuntu1) ) #21-Ubuntu SMP Thu Apr 6 17:04:57 UTC 2017 (Ubuntu 4.10.0-19.21-generic 4.10.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfeeffff] usable
BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfef2fff] ACPI NVS
BIOS-e820: [mem 0x00000000bfef3000-0x00000000bfefffff] ACPI data
BIOS-e820: [mem 0x00000000f0000000-0x00000000f1ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: System manufacturer System Product Name/P5N-D, BIOS ASUS P5N-D ACPI BIOS Revision 1204 01/07/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CDFFF write-protect
CE000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 100000000 mask FC0000000 write-back
3 base 0BFF00000 mask FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
total RAM covered: 4095M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G
e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbfef0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5b20-0x000f5b2f] mapped at [ffff9a78800f5b20]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9a7880099000] 99000 size 24576
BRK [0x07028000, 0x07028fff] PGTABLE
BRK [0x07029000, 0x07029fff] PGTABLE
BRK [0x0702a000, 0x0702afff] PGTABLE
BRK [0x0702b000, 0x0702bfff] PGTABLE
BRK [0x0702c000, 0x0702cfff] PGTABLE
RAMDISK: [mem 0x32de1000-0x356e7fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7660 000024 (v02 Nvidia)
ACPI: XSDT 0x00000000BFEF30C0 00004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: FACP 0x00000000BFEF9AC0 0000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20160930/tbfadt-603)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20160930/tbfadt-603)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20160930/tbfadt-603)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20160930/tbfadt-603)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20160930/tbfadt-603)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20160930/tbfadt-708)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20160930/tbfadt-708)
ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20160930/tbfadt-708)
ACPI: DSDT 0x00000000BFEF3240 00680A (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000)
ACPI: FACS 0x00000000BFEF0000 000040
ACPI: FACS 0x00000000BFEF0000 000040
ACPI: HPET 0x00000000BFEF9D00 000038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
ACPI: MCFG 0x00000000BFEF9D80 00003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: APIC 0x00000000BFEF9C00 000098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: SSDT 0x00000000BFEF9E00 00087B (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
NODE_DATA(0) allocated [mem 0x13ffd2000-0x13fffcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000013fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000bfeeffff]
node 0: [mem 0x0000000100000000-0x000000013fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
On node 0 totalpages: 1048206
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12220 pages used for memmap
DMA32 zone: 782064 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbfef0000-0xbfef2fff]
PM: Registered nosave memory: [mem 0xbfef3000-0xbfefffff]
PM: Registered nosave memory: [mem 0xbff00000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf1ffffff]
PM: Registered nosave memory: [mem 0xf2000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xbff00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff9a79bfc00000 s107800 r8192 d31464 u524288
pcpu-alloc: s107800 r8192 d31464 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031805
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3997732K/4192824K available (9061K kernel code, 1666K rwdata, 3816K rodata, 2228K init, 2364K bss, 195092K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:524544 nr_irqs:456 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2399.894 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.78 BogoMIPS (lpj=9599576)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 34175 entries in 134 pages
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (family: 0x6, model: 0xf, stepping: 0xb)
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
core: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19199.15 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbfef0000-0xbfef2fff] (12288 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 10:56:06, date: 09/30/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf0000000-0xf1ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf1ffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [10de:03a3] type 00 class 0x060000
pci 0000:00:00.1: [10de:03ac] type 00 class 0x050000
pci 0000:00:00.2: [10de:03aa] type 00 class 0x050000
pci 0000:00:00.3: [10de:03a9] type 00 class 0x050000
pci 0000:00:00.4: [10de:03ab] type 00 class 0x050000
pci 0000:00:00.5: [10de:03a8] type 00 class 0x050000
pci 0000:00:00.6: [10de:03b5] type 00 class 0x050000
pci 0000:00:00.7: [10de:03b4] type 00 class 0x050000
pci 0000:00:01.0: [10de:03ad] type 00 class 0x050000
pci 0000:00:01.1: [10de:03ae] type 00 class 0x050000
pci 0000:00:01.2: [10de:03af] type 00 class 0x050000
pci 0000:00:01.3: [10de:03b0] type 00 class 0x050000
pci 0000:00:01.4: [10de:03b1] type 00 class 0x050000
pci 0000:00:01.5: [10de:03b2] type 00 class 0x050000
pci 0000:00:01.6: [10de:03b3] type 00 class 0x050000
pci 0000:00:02.0: [10de:03b6] type 00 class 0x050000
pci 0000:00:02.1: [10de:03bc] type 00 class 0x050000
pci 0000:00:02.2: [10de:03ba] type 00 class 0x050000
pci 0000:00:03.0: [10de:03b7] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [10de:0270] type 00 class 0x050000
pci 0000:00:0a.0: [10de:0260] type 00 class 0x060100
pci 0000:00:0a.1: [10de:0264] type 00 class 0x0c0500
pci 0000:00:0a.1: reg 0x20: [io 0x1c00-0x1c3f]
pci 0000:00:0a.1: reg 0x24: [io 0x1c80-0x1cbf]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.2: [10de:0272] type 00 class 0x050000
pci 0000:00:0b.0: [10de:026d] type 00 class 0x0c0310
pci 0000:00:0b.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0b.1: [10de:026e] type 00 class 0x0c0320
pci 0000:00:0b.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: System wakeup disabled by ACPI
pci 0000:00:0d.0: [10de:0265] type 00 class 0x01018a
pci 0000:00:0d.0: reg 0x20: [io 0xfd00-0xfd0f]
pci 0000:00:0d.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:0d.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:0d.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:0d.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:0e.0: [10de:0266] type 00 class 0x010185
pci 0000:00:0e.0: reg 0x10: [io 0x09f0-0x09f7]
pci 0000:00:0e.0: reg 0x14: [io 0x0bf0-0x0bf3]
pci 0000:00:0e.0: reg 0x18: [io 0x0970-0x0977]
pci 0000:00:0e.0: reg 0x1c: [io 0x0b70-0x0b73]
pci 0000:00:0e.0: reg 0x20: [io 0xf800-0xf80f]
pci 0000:00:0e.0: reg 0x24: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:0f.0: [10de:0267] type 00 class 0x010185
pci 0000:00:0f.0: reg 0x10: [io 0x09e0-0x09e7]
pci 0000:00:0f.0: reg 0x14: [io 0x0be0-0x0be3]
pci 0000:00:0f.0: reg 0x18: [io 0x0960-0x0967]
pci 0000:00:0f.0: reg 0x1c: [io 0x0b60-0x0b63]
pci 0000:00:0f.0: reg 0x20: [io 0xf300-0xf30f]
pci 0000:00:0f.0: reg 0x24: [mem 0xfe02c000-0xfe02cfff]
pci 0000:00:10.0: [10de:026f] type 01 class 0x060401
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [10de:026c] type 00 class 0x040300
pci 0000:00:10.1: reg 0x10: [mem 0xfe024000-0xfe027fff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:14.0: [10de:0269] type 00 class 0x068000
pci 0000:00:14.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:14.0: reg 0x14: [io 0xf200-0xf207]
pci 0000:00:14.0: supports D1 D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:01:00.0: [10de:05bf] type 01 class 0x060400
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 01-06]
pci 0000:00:03.0: bridge window [io 0xa000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:00:03.0: bridge window [mem 0xc8000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10de:05bf] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:01.0: [10de:05bf] type 01 class 0x060400
pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: [10de:05bf] type 01 class 0x060400
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:03.0: [10de:05bf] type 01 class 0x060400
pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-06]
pci 0000:01:00.0: bridge window [io 0xa000-0xdfff]
pci 0000:01:00.0: bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:01:00.0: bridge window [mem 0xc8000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: [10de:11c0] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xc8000000-0xcfffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xdc00-0xdc7f]
pci 0000:03:00.0: reg 0x30: [mem 0xfbf00000-0xfbf7ffff pref]
pci 0000:03:00.1: [10de:0e0b] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfbffc000-0xfbffffff]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:00.0: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:02:00.0: bridge window [mem 0xc8000000-0xd7ffffff 64bit pref]
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:02:01.0: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:02:01.0: bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
pci 0000:02:02.0: PCI bridge to [bus 05]
pci 0000:02:02.0: bridge window [io 0xb000-0xbfff]
pci 0000:02:02.0: bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:02:02.0: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
pci 0000:02:03.0: PCI bridge to [bus 06]
pci 0000:02:03.0: bridge window [io 0xa000-0xafff]
pci 0000:02:03.0: bridge window [mem 0xfcd00000-0xfcdfffff]
pci 0000:02:03.0: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
pci 0000:07:06.0: [168c:0023] type 00 class 0x028000
pci 0000:07:06.0: reg 0x10: [mem 0xfdfe0000-0xfdfeffff]
pci 0000:07:08.0: [1106:3044] type 00 class 0x0c0010
pci 0000:07:08.0: reg 0x10: [mem 0xfdfff000-0xfdfff7ff]
pci 0000:07:08.0: reg 0x14: [io 0xec00-0xec7f]
pci 0000:07:08.0: supports D2
pci 0000:07:08.0: PME# supported from D2 D3hot D3cold
pci 0000:00:10.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:10.0: bridge window [io 0xe000-0xefff]
pci 0000:00:10.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:10.0: bridge window [mem 0xfde00000-0xfdefffff pref]
pci 0000:00:10.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:10.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0xbff00000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: Enabled 3 GPEs in block 20 to 5F
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:03:00.0: vgaarb: setting as boot VGA device
pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:03:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfef0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x1000-0x107f] has been reserved
system 00:00: [io 0x1080-0x10ff] has been reserved
system 00:00: [io 0x1400-0x147f] has been reserved
system 00:00: [io 0x1480-0x14ff] has been reserved
system 00:00: [io 0x1800-0x187f] has been reserved
system 00:00: [io 0x1880-0x18ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0290-0x0297] has been reserved
system 00:01: [io 0x0880-0x088f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:06: [mem 0xf0000000-0xf1ffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x000f0000-0x000f3fff] could not be reserved
system 00:07: [mem 0x000f4000-0x000f7fff] could not be reserved
system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:07: [mem 0xfeff0000-0xfeff00ff] has been reserved
system 00:07: [mem 0xbfef0000-0xbfefffff] could not be reserved
system 00:07: [mem 0xffff0000-0xffffffff] has been reserved
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x00100000-0xbfeeffff] could not be reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: [mem 0xfeff0000-0xfeff03ff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:00.0: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:02:00.0: bridge window [mem 0xc8000000-0xd7ffffff 64bit pref]
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:02:01.0: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:02:01.0: bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
pci 0000:02:02.0: PCI bridge to [bus 05]
pci 0000:02:02.0: bridge window [io 0xb000-0xbfff]
pci 0000:02:02.0: bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:02:02.0: bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
pci 0000:02:03.0: PCI bridge to [bus 06]
pci 0000:02:03.0: bridge window [io 0xa000-0xafff]
pci 0000:02:03.0: bridge window [mem 0xfcd00000-0xfcdfffff]
pci 0000:02:03.0: bridge window [mem 0xdfd00000-0xdfdfffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-06]
pci 0000:01:00.0: bridge window [io 0xa000-0xdfff]
pci 0000:01:00.0: bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:01:00.0: bridge window [mem 0xc8000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 01-06]
pci 0000:00:03.0: bridge window [io 0xa000-0xdfff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfcffffff]
pci 0000:00:03.0: bridge window [mem 0xc8000000-0xdfffffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 07]
pci 0000:00:10.0: bridge window [io 0xe000-0xefff]
pci 0000:00:10.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:10.0: bridge window [mem 0xfde00000-0xfdefffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xa000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
pci_bus 0000:01: resource 2 [mem 0xc8000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xa000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfcffffff]
pci_bus 0000:02: resource 2 [mem 0xc8000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:03: resource 2 [mem 0xc8000000-0xd7ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:04: resource 2 [mem 0xdff00000-0xdfffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xfce00000-0xfcefffff]
pci_bus 0000:05: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xa000-0xafff]
pci_bus 0000:06: resource 1 [mem 0xfcd00000-0xfcdfffff]
pci_bus 0000:06: resource 2 [mem 0xdfd00000-0xdfdfffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:07: resource 2 [mem 0xfde00000-0xfdefffff pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:07: resource 8 [mem 0xbff00000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 42012K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbef0000-0xbfef0000] (64MB) mapped at [ffff9a793bef0000-ffff9a793feeffff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1506768967.044:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 1680x1050x32, linelength=6720, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd7000000, mapped to 0xffffa729c1000000, using 6912k, total 6912k
Console: switching to colour frame buffer device 210x65
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:0b.1: EHCI Host Controller
ehci-pci 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:0b.1: debug port 1
ehci-pci 0000:00:0b.1: cache line size of 32 is not supported
ehci-pci 0000:00:0b.1: irq 22, io mem 0xfe02e000
ehci-pci 0000:00:0b.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:0b.0: OHCI PCI host controller
ohci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:0b.0: irq 23, io mem 0xfe02f000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 4.10.0-19-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:0b.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x6fb, pf=0x10, revision=0xba
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 8e99ee5b0fead84880b7849b477f2b92957907bc'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 1:225:933
rtc_cmos 00:02: setting system clock to 2017-09-30 10:56:07 UTC (1506768967)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2228K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1164K
Freeing unused kernel memory: 280K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
Floppy drive(s): fd0 is 1.44M
pata_amd 0000:00:0d.0: version 0.4.1
scsi host0: pata_amd
scsi host1: pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfd00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfd08 irq 15
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
sata_nv 0000:00:0e.0: Using SWNCQ mode
[drm] Initialized
scsi host2: sata_nv
scsi host3: sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf800 irq 21
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf808 irq 21
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
sata_nv 0000:00:0f.0: Using SWNCQ mode
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
scsi host4: sata_nv
scsi host5: sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf300 irq 20
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf308 irq 20
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
FDC 0 is a post-1991 82077
wmi: Mapper loaded
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
checking generic (d7000000 6c0000) vs hw (c8000000 8000000)
checking generic (d7000000 6c0000) vs hw (d6000000 2000000)
fb: switching to nouveaufb from VESA VGA
Console: switching to colour dummy device 80x25
nouveau 0000:03:00.0: NVIDIA GK106 (0e6000a1)
firewire_ohci 0000:07:08.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
nouveau 0000:03:00.0: bios: version 80.06.58.00.03
nouveau 0000:03:00.0: fb: 2048 MiB GDDR5
ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.01, max UDMA/66
ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
ata1.00: configured for UDMA/66
scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.01 PQ: 0 ANSI: 5
sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
[TTM] Zone kernel: Available graphics memory: 2021724 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:03:00.0: DRM: VRAM: 2048 MiB
nouveau 0000:03:00.0: DRM: GART: 1048576 MiB
nouveau 0000:03:00.0: DRM: TMDS table version 2.0
nouveau 0000:03:00.0: DRM: DCB version 4.0
nouveau 0000:03:00.0: DRM: DCB outp 00: 02000f00 00000000
nouveau 0000:03:00.0: DRM: DCB outp 01: 01000f02 00020030
nouveau 0000:03:00.0: DRM: DCB outp 03: 02011f62 00020010
nouveau 0000:03:00.0: DRM: DCB outp 04: 04822fb6 0f420010
nouveau 0000:03:00.0: DRM: DCB outp 05: 04022f72 00020010
nouveau 0000:03:00.0: DRM: DCB outp 06: 08033f82 00020030
nouveau 0000:03:00.0: DRM: DCB conn 00: 00001030
nouveau 0000:03:00.0: DRM: DCB conn 01: 00010161
nouveau 0000:03:00.0: DRM: DCB conn 02: 00020246
nouveau 0000:03:00.0: DRM: DCB conn 03: 01000331
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:03:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
nouveau 0000:03:00.0: DRM: MM: using COPY for buffer copies
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
nouveau 0000:03:00.0: DRM: allocated 1680x1050 fb: 0x60000, bo ffff9a79b2ae5800
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:03:00.0 on minor 0
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 48:5b:39:17:07:05
forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
forcedeth 0000:00:14.0 enp0s20: renamed from eth0
firewire_core 0000:07:08.0: created device fw0: GUID 001e8c0000cfae77, S400
usb 2-1: new low-speed USB device number 2 using ohci-pci
tsc: Refined TSC clocksource calibration: 2399.977 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298218dfc2, max_idle_ns: 440795219998 ns
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: ST3360320AS, 3.AAM, max UDMA/133
ata4.00: 703282608 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST3360320AS M PQ: 0 ANSI: 5
usb 2-1: New USB device found, idVendor=0000, idProduct=0538
usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1: Product: USB OPTICAL MOUSE
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sda] 703282608 512-byte logical blocks: (360 GB/335 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.0/0003:0000:0538.0001/input/input2
hid-generic 0003:0000:0538.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:0b.0-1/input0
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
usb 2-2: new full-speed USB device number 3 using ohci-pci
usb 2-2: New USB device found, idVendor=04f9, idProduct=023e
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2: Product: DCP-197C
usb 2-2: Manufacturer: Brother
usb 2-2: SerialNumber: BROC2F417613
usb-storage 2-2:1.2: USB Mass Storage device detected
scsi host6: usb-storage 2-2:1.2
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATA-9: SanDisk SDSSDA240G, Z32070RL, max UDMA/133
ata6.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA SanDisk SDSSDA24 70RL PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 5:0:0:0: [sdb] Attached SCSI disk
random: fast init done
usb 2-4: new low-speed USB device number 4 using ohci-pci
clocksource: Switched to clocksource tsc
usb 2-4: New USB device found, idVendor=046d, idProduct=c31c
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: USB Keyboard
usb 2-4: Manufacturer: Logitech
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/0003:046D:C31C.0002/input/input3
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:0b.0-4/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.1/0003:046D:C31C.0003/input/input4
hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:0b.0-4/input1
usb 1-6: new high-speed USB device number 5 using ehci-pci
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-6: New USB device found, idVendor=0781, idProduct=5581
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Ultra
usb 1-6: Manufacturer: SanDisk
usb 1-6: SerialNumber: 4C530001101102121100
usb-storage 1-6:1.0: USB Mass Storage device detected
scsi host7: usb-storage 1-6:1.0
scsi 6:0:0:0: Direct-Access Brother DCP-197C 1.00 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
ip_tables: (C) 2000-2006 Netfilter Core Team
scsi 7:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
sd 7:0:0:0: Attached scsi generic sg4 type 0
sd 7:0:0:0: [sdd] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB)
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 7:0:0:0: [sdd] Attached SCSI removable disk
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
random: crng init done
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Audit Socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[277]: Received request to flush runtime journal from PID 1
Adding 947196k swap on /swapfile. Priority:-1 extents:4 across:971772k FS
ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C05 (\_SB.PCI0.SM00) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C80-0x0000000000001CBF conflicts with OpRegion 0x0000000000001C80-0x0000000000001C85 (\_SB.PCI0.SM01) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xffffa729c1260000, irq=16
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
intel_powerclamp: No package C-state available
intel_powerclamp: No package C-state available
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
snd_hda_intel 0000:00:10.1: Disabling MSI
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
usblp 2-2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x023E
usbcore: registered new interface driver usblp
ath9k 0000:07:06.0 wlp7s6: renamed from wlan0
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input5
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input6
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input7
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input8
audit: type=1400 audit(1506768978.136:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=646 comm="apparmor_parser"
audit: type=1400 audit(1506768978.136:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=645 comm="apparmor_parser"
audit: type=1400 audit(1506768978.148:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=657 comm="apparmor_parser"
audit: type=1400 audit(1506768978.184:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=648 comm="apparmor_parser"
audit: type=1400 audit(1506768978.184:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=648 comm="apparmor_parser"
audit: type=1400 audit(1506768978.184:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=648 comm="apparmor_parser"
audit: type=1400 audit(1506768978.184:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=648 comm="apparmor_parser"
audit: type=1400 audit(1506768978.196:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=647 comm="apparmor_parser"
audit: type=1400 audit(1506768978.196:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=647 comm="apparmor_parser"
audit: type=1400 audit(1506768978.328:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ubuntu-printing-app" pid=662 comm="apparmor_parser"
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC883: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input9
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input10
input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input11
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:10.1/sound/card0/input12
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:10.1/sound/card0/input13
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:10.1/sound/card0/input14
input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:10.1/sound/card0/input15
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:10.1/sound/card0/input16
IPv6: ADDRCONF(NETDEV_UP): enp0s20: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
usblp0: removed
usblp 2-2:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x023E
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
systemd: 23 output lines suppressed due to ratelimiting
usb 1-6: USB disconnect, device number 5
kauditd_printk_skb: 75 callbacks suppressed
audit: type=1400 audit(1506769511.589:37): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/tcpdump" pid=6244 comm="apparmor_parser"
audit: type=1400 audit(1506769516.733:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=6468 comm="apparmor_parser"
audit: type=1400 audit(1506769516.749:39): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=6468 comm="apparmor_parser"
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1 gen() 3861 MB/s
raid6: sse2x1 xor() 3945 MB/s
raid6: sse2x2 gen() 4896 MB/s
raid6: sse2x2 xor() 4836 MB/s
raid6: sse2x4 gen() 6920 MB/s
raid6: sse2x4 xor() 5444 MB/s
raid6: using algorithm sse2x4 gen() 6920 MB/s
raid6: .... xor() 5444 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 9594.000 MB/sec
generic_sse: 8460.000 MB/sec
xor: using function: prefetch64-sse (9594.000 MB/sec)
Btrfs loaded, crc32c=crc32c-generic
perf: interrupt took too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
perf: interrupt took too long (3154 > 3146), lowering kernel.perf_event_max_sample_rate to 63250
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
perf: interrupt took too long (4014 > 3942), lowering kernel.perf_event_max_sample_rate to 49750
perf: interrupt took too long (5035 > 5017), lowering kernel.perf_event_max_sample_rate to 39500
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
perf: interrupt took too long (6332 > 6293), lowering kernel.perf_event_max_sample_rate to 31500
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
perf: interrupt took too long (8073 > 7915), lowering kernel.perf_event_max_sample_rate to 24750
audit: type=1400 audit(1506770692.048:40): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince" pid=22093 comm="apparmor_parser"
audit: type=1400 audit(1506770692.068:41): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=22093 comm="apparmor_parser"
audit: type=1400 audit(1506770692.068:42): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer" pid=22093 comm="apparmor_parser"
audit: type=1400 audit(1506770692.084:43): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=22093 comm="apparmor_parser"
audit: type=1400 audit(1506770692.084:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=22093 comm="apparmor_parser"
audit: type=1400 audit(1506770692.100:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=22093 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
perf: interrupt took too long (10154 > 10091), lowering kernel.perf_event_max_sample_rate to 19500
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
intel_powerclamp: No package C-state available
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp7s6: link is not ready