dmesg - flex01
microcode: microcode updated early to revision 0x29, date = 2013-06-12
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-693.2.2.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) ) #1 SMP Tue Sep 12 22:26:13 UTC 2017
Command line: BOOT_IMAGE=/vmlinuz-3.10.0-693.2.2.el7.x86_64 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=en_US.UTF-8
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000aa5cffff] usable
BIOS-e820: [mem 0x00000000aa5d0000-0x00000000aa5d01ff] ACPI NVS
BIOS-e820: [mem 0x00000000aa5d0200-0x00000000aa5d2fff] reserved
BIOS-e820: [mem 0x00000000aa5d3000-0x00000000aa6cffff] ACPI NVS
BIOS-e820: [mem 0x00000000aa6d0000-0x00000000aa6effff] ACPI data
BIOS-e820: [mem 0x00000000aa6f0000-0x00000000af9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000014fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: TOSHIBA PORTEGE R830/Portable PC, BIOS Version 3.70 05/07/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x14fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 uncachable
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0B0000000 mask FF0000000 uncachable
4 base 0AC000000 mask FFC000000 uncachable
5 base 0AB800000 mask FFF800000 uncachable
6 base 100000000 mask F80000000 write-back
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 4092MB, range: 4MB, type UC
reg 1, base: 0GB, range: 2GB, type WB
reg 2, base: 2GB, range: 1GB, type WB
reg 3, base: 2816MB, range: 256MB, type UC
reg 4, base: 2752MB, range: 64MB, type UC
reg 5, base: 2744MB, range: 8MB, type UC
reg 6, base: 4GB, range: 2GB, type WB
total RAM covered: 4792M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2560MB, range: 128MB, type WB
reg 3, base: 2688MB, range: 64MB, type WB
reg 4, base: 2744MB, range: 8MB, type UC
reg 5, base: 4GB, range: 2GB, type WB
e820: update [mem 0xab800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xaa5d0 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff880000098000] 98000 size 24576
reserving inaccessible SNB gfx pages
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
BRK [0x01fea000, 0x01feafff] PGTABLE
BRK [0x01feb000, 0x01febfff] PGTABLE
BRK [0x01fec000, 0x01fecfff] PGTABLE
BRK [0x01fed000, 0x01fedfff] PGTABLE
BRK [0x01fee000, 0x01feefff] PGTABLE
BRK [0x01fef000, 0x01feffff] PGTABLE
BRK [0x01ff0000, 0x01ff0fff] PGTABLE
RAMDISK: [mem 0x34471000-0x36230fff]
Early table checksum verification disabled
ACPI: RSDP 00000000000f0030 00014 (v00 TOSHIB)
ACPI: RSDT 00000000aa6ef038 00054 (v01 TOSHIB A007D 00000003 01000013)
ACPI: FACP 00000000aa6ee000 00081 (v02 TOSHIB A007D 00000003 LOHR 0000005F)
ACPI: DSDT 00000000aa6dd000 08A46 (v02 TOSHIB A007D 20111220 INTL 20061109)
ACPI: FACS 00000000aa6ad000 00040
ACPI: HPET 00000000aa6ed000 00038 (v01 TOSHIB A007D 00000001 LOHR 0000005F)
ACPI: APIC 00000000aa6ec000 000BC (v01 TOSHIB A007D 00000001 LOHR 0000005F)
ACPI: MCFG 00000000aa6eb000 0003C (v01 TOSHIB A007D 00000001 LOHR 0000005F)
ACPI: ASF! 00000000aa6ea000 000A0 (v32 TOSHIB A007D 00000001 LOHR 0000005F)
ACPI: TCPA 00000000aa6e9000 00032 (v02 TOSHIB A007D 00000000 LOHR 0000005F)
ACPI: BOOT 00000000aa6e8000 00028 (v01 TOSHIB A007D 00000000 LOHR 0000005F)
ACPI: SLIC 00000000aa6e7000 00176 (v01 TOSHIB A007D 00000000 LOHR 0000005F)
ACPI: SSDT 00000000aa6dc000 00395 (v01 TOSHIB SataAhci 00001000 INTL 20061109)
ACPI: SSDT 00000000aa6d9000 00720 (v01 TOSHIB PtidDevc 00001000 INTL 20061109)
ACPI: SSDT 00000000aa6d7000 007E5 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 00000000aa6d6000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000014fdfffff]
NODE_DATA(0) allocated [mem 0x14fdd9000-0x14fdfffff]
Reserving 161MB of memory at 672MB for crashkernel (System RAM: 3999MB)
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x14fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0xaa5cffff]
node 0: [mem 0x100000000-0x14fdfffff]
Initmem setup node 0 [mem 0x00001000-0x14fdfffff]
On node 0 totalpages: 1023853
DMA zone: 64 pages used for memmap
DMA zone: 157 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 10824 pages used for memmap
DMA32 zone: 692688 pages, LIFO batch:31
Normal zone: 5112 pages used for memmap
Normal zone: 327168 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000aba00000-0x00000000af9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0xaa5d0000-0xaa5d0fff]
PM: Registered nosave memory: [mem 0xaa5d1000-0xaa5d2fff]
PM: Registered nosave memory: [mem 0xaa5d3000-0xaa6cffff]
PM: Registered nosave memory: [mem 0xaa6d0000-0xaa6effff]
PM: Registered nosave memory: [mem 0xaa6f0000-0xaf9fffff]
PM: Registered nosave memory: [mem 0xafa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0xafa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88014fa00000 s97048 r8192 d29928 u262144
pcpu-alloc: s97048 r8192 d29928 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007696
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.0-693.2.2.el7.x86_64 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=en_US.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 3750060k/5502976k available (6886k kernel code, 1407564k absent, 345352k reserved, 4545k data, 1764k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=8.
NR_IRQS:327936 nr_irqs:488 0
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2494.200 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.40 BogoMIPS (lpj=2494200)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 26586 entries in 104 pages
smpboot: Max logical packages: 4
IRQ remapping doesn't support X2APIC mode, disable x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (19953.60 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xaa5d0000-0xaa5d01ff] (512 bytes)
PM: Registering ACPI NVS region [mem 0xaa5d3000-0xaa6cffff] (1036288 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 20:13:00, date: 09/26/17
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff8801496e2800 0071E (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff8801496de400 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT ffff8801496eb600 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PDOC] (off)
acpi PNP0A05:00: ACPI dock station (docks/bays count: 1)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff window]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc4824000-0xc482400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xc4800000-0xc481ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xc482a000-0xc482afff]
pci 0000:00:19.0: reg 0x18: [io 0x3060-0x307f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xc4829000-0xc48293ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc4820000-0xc4823fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:2448] type 01 class 0x060401
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc4828000-0xc48283ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
pci 0000:00:1f.2: reg 0x14: [io 0x309c-0x309f]
pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
pci 0000:00:1f.2: reg 0x1c: [io 0x3098-0x309b]
pci 0000:00:1f.2: reg 0x20: [io 0x3040-0x305f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc4827000-0xc48277ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:01:00.0: [1180:e823] type 00 class 0x088001
pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:01:00.0: reg 0x10: [mem 0xc4700000-0xc47000ff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xc4700000-0xc47fffff]
acpiphp: Slot [1] registered
pci 0000:00:1c.1: PCI bridge to [bus 02-03]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xc2700000-0xc46fffff]
pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc23fffff 64bit pref]
pci 0000:04:00.0: [168c:002b] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xc2600000-0xc260ffff 64bit]
pci 0000:04:00.0: supports D1
pci 0000:04:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xc2600000-0xc26fffff]
pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xc2500000-0xc2501fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xc2500000-0xc25fffff]
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [mem 0xc2400000-0xc24fffff]
pci 0000:00:1c.6: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0xafa00000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 *6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xaa5d0000-0xabffffff]
e820: reserve RAM buffer [mem 0x14fe00000-0x14fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xafa00000-0xafa00fff] has been reserved
system 00:00: [mem 0xfeb00000-0xfeb03fff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: [mem 0xff000000-0xffffffff] could not be reserved
system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
system 00:03: [io 0x1000-0x100f] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0xffff] has been reserved
system 00:03: [io 0x0400-0x047f] could not be reserved
system 00:03: [io 0x0500-0x053f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0680-0x06ff] has been reserved
system 00:04: [io 0x01e0-0x01e7] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs TOS0220 PNP0f13 (active)
system 00:08: [mem 0x20000000-0x201fffff] has been reserved
system 00:08: [mem 0x40000000-0x401fffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.5: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.5: BAR 15: assigned [mem 0xafb00000-0xafcfffff 64bit pref]
pci 0000:00:1c.5: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xc4700000-0xc47fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-03]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0xc2700000-0xc46fffff]
pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc23fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xc2600000-0xc26fffff]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xc2500000-0xc25fffff]
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.5: bridge window [mem 0xc2400000-0xc24fffff]
pci 0000:00:1c.5: bridge window [mem 0xafb00000-0xafcfffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 07]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xafa00000-0xfeafffff window]
pci_bus 0000:01: resource 1 [mem 0xc4700000-0xc47fffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xc2700000-0xc46fffff]
pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc23fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xc2600000-0xc26fffff]
pci_bus 0000:05: resource 1 [mem 0xc2500000-0xc25fffff]
pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0xc2400000-0xc24fffff]
pci_bus 0000:06: resource 2 [mem 0xafb00000-0xafcfffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:07: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:07: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:07: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:07: resource 10 [mem 0xafa00000-0xfeafffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 30464k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa65d0000-0xaa5d0000] (64MB) mapped at [ffff8800a65d0000-ffff8800aa5cffff]
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
Simple Boot Flag at 0x7c set to 0x1
sha1_ssse3: Using AVX optimized SHA-1 implementation
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1506456779.520:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7383
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (64 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT1] (battery absent)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xc4829000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-693.2.2.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xc4828000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-693.2.2.el7.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:05:00.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000004
xhci_hcd 0000:05:00.0: irq 24 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 25 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 26 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 27 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 28 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-693.2.2.el7.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:05:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.10.0-693.2.2.el7.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:05:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one year, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
microcode: Microcode Update Driver: v2.01 , Peter Oruba
PM: Hibernation image not present or could not be loaded.
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: c08b355341760f030a64e3c550e113cd47771ea9'
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type encrypted registered
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 1-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
hub 1-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=0781, idProduct=5583
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: Ultra Fit
usb 4-1: Manufacturer: SanDisk
usb 4-1: SerialNumber: 4C530001120611104175
Magic number: 1:264:246
rtc_cmos 00:05: setting system clock to 2017-09-26 20:13:01 UTC (1506456781)
Freeing unused kernel memory: 1764k freed
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Journal Service...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tsc: Refined TSC clocksource calibration: 2494.333 MHz
Switched to clocksource tsc
usb-storage 4-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 4-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
[drm] Initialized
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
libata version 3.00 loaded.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
sdhci-pci 0000:01:00.0: No vmmc regulator found
sdhci-pci 0000:01:00.0: No vqmmc regulator found
mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
psmouse serio1: synaptics: queried max coordinates: x [..5792], y [..4930]
usb 1-1.1: New USB device found, idVendor=08ff, idProduct=168b
usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.1: Product: Fingerprint Sensor
psmouse serio1: synaptics: queried min coordinates: x [1142..], y [924..]
e1000e 0000:00:19.0 (unregistered net_device): registered PHC clock
usb 1-1.3: new low-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00273/0x240000/0xa2400, board id: 1514, fw id: 988422
random: fast init done
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
usb 1-1.3: New USB device found, idVendor=0461, idProduct=4d17
usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.3: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input5
hid-generic 0003:0461:4D17.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.3/input0
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) e8:e0:b7:e2:d5:5e
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0xd impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
ata1: SATA max UDMA/133 abar m2048@0xc4827000 port 0xc4827100 irq 30
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xc4827000 port 0xc4827200 irq 30
ata4: SATA max UDMA/133 abar m2048@0xc4827000 port 0xc4827280 irq 30
ata5: DUMMY
ata6: DUMMY
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 31 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-1.5: new high-speed USB device number 5 using ehci-pci
ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
acpi device:05: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6
[drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff880149ad6d48), AE_NOT_FOUND (20130517/psparse-536)
ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff880149ad6d70), AE_NOT_FOUND (20130517/psparse-536)
ata1.00: ATA-8: TOSHIBA MK3261GSYN, MH001M, max UDMA/100
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff880149ad6d48), AE_NOT_FOUND (20130517/psparse-536)
ACPI Error: [GTF0] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff880149ad6d70), AE_NOT_FOUND (20130517/psparse-536)
ata1.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3261GS 1M PQ: 0 ANSI: 5
usb 1-1.5: New USB device found, idVendor=0bda, idProduct=58e5
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: TOSHIBA Web Camera
usb 1-1.5: Manufacturer: YZC626HR
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
psmouse serio1: synaptics: queried max coordinates: x [..5792], y [..4930]
psmouse serio1: synaptics: queried min coordinates: x [1142..], y [924..]
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: MATSHITADVD-RAM UJ8B2E, 1.20, max UDMA/100
ata3.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8B2E 1.20 PQ: 0 ANSI: 5
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00273/0x240000/0xa2400, board id: 1514, fw id: 988422
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
scsi 0:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sdb] 121307136 512-byte logical blocks: (62.1 GB/57.8 GiB)
sd 0:0:0:0: [sdb] Write Protect is off
sd 0:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 0:0:0:0: [sdb] Attached SCSI removable disk
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
random: crng init done
SGI XFS with ACLs, security attributes, no debug enabled
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Ending clean mount
systemd-journald[111]: Received SIGTERM from PID 1 (systemd).
type=1404 audit(1506456784.771:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 106024 rules.
SELinux: 2048 avtab hash slots, 106024 rules.
SELinux: 8 users, 14 roles, 4998 types, 307 bools, 1 sens, 1024 cats
SELinux: 94 classes, 106024 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
type=1403 audit(1506456785.062:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 297.979ms.
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
systemd[1]: Relabelled /dev and /run in 20.987ms.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd-journald[532]: Received request to flush runtime journal from PID 1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057b (\GPIO) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057b (\GPIO) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057b (\GPIO) (20130517/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: irq 32 for MSI/MSI-X
toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
toshiba_bluetooth: Re-enabling Toshiba Bluetooth
input: PC Speaker as /devices/platform/pcspkr/input/input8
wmi: Mapper loaded
sd 1:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sd 0:0:0:0: Attached scsi generic sg2 type 0
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
input: Toshiba input device as /devices/virtual/input/input9
snd_hda_intel 0000:00:1b.0: irq 33 for MSI/MSI-X
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
Linux video capture interface: v2.00
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera (0bda:58e5)
alg: No test for crc32 (crc32-pclmul)
ath: phy0: ASPM enabled: 0x43
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
input: TOSHIBA Web Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input15
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90001040000, irq=18
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
Adding 6066172k swap on /dev/mapper/centos-swap. Priority:-1 extents:1 across:6066172k FS
XFS (sdb1): Mounting V5 Filesystem
usb 2-1.6: new full-speed USB device number 3 using ehci-pci
usb 2-1.6: New USB device found, idVendor=0930, idProduct=0215
usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
XFS (dm-2): Mounting V5 Filesystem
usbcore: registered new interface driver btusb
usbcore: registered new interface driver ath3k
usb 2-1.6: USB disconnect, device number 3
usb 2-1.6: new full-speed USB device number 4 using ehci-pci
usb 2-1.6: New USB device found, idVendor=0cf3, idProduct=3005
usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
XFS (dm-2): Ending clean mount
XFS (sdb1): Ending clean mount
type=1305 audit(1506449594.813:4): audit_pid=787 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
ip_set: protocol 6
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
wlp4s0: authenticate with f4:06:8d:b5:7c:65
wlp4s0: send auth to f4:06:8d:b5:7c:65 (try 1/3)
wlp4s0: authenticated
wlp4s0: associate with f4:06:8d:b5:7c:65 (try 1/3)
wlp4s0: RX AssocResp from f4:06:8d:b5:7c:65 (capab=0x431 status=0 aid=2)
wlp4s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
fuse init (API version 7.22)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
perf: interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3162 > 3136), lowering kernel.perf_event_max_sample_rate to 63000
TCP: lp registered
toshiba_acpi: Unknown key 12e