dmesg - basic
microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
Linux version 4.10.0-35-generic (buildd@lcy01-16) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #39-Ubuntu SMP Wed Sep 13 07:46:59 UTC 2017 (Ubuntu 4.10.0-35.39-generic 4.10.17)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
BIOS-e820: [mem 0x000000000009c000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009e1b9fff] usable
BIOS-e820: [mem 0x000000009e1ba000-0x000000009e27bfff] ACPI NVS
BIOS-e820: [mem 0x000000009e27c000-0x000000009fa31fff] usable
BIOS-e820: [mem 0x000000009fa32000-0x000000009fa99fff] reserved
BIOS-e820: [mem 0x000000009fa9a000-0x000000009faabfff] usable
BIOS-e820: [mem 0x000000009faac000-0x000000009fb19fff] ACPI NVS
BIOS-e820: [mem 0x000000009fb1a000-0x000000009fb25fff] usable
BIOS-e820: [mem 0x000000009fb26000-0x000000009fb39fff] ACPI data
BIOS-e820: [mem 0x000000009fb3a000-0x000000009fbfffff] usable
BIOS-e820: [mem 0x000000009fc00000-0x00000000afffffff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc0bfff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000045fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Intel S5000PSL/S5000PSL, BIOS S5000.86B.10.00.0085.112920071426 11/29/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x460000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask 3F80000000 write-back
1 base 0080000000 mask 3FE0000000 write-back
2 base 009FC00000 mask 3FFFC00000 uncachable
3 base 0100000000 mask 3F00000000 write-back
4 base 0200000000 mask 3E00000000 write-back
5 base 0400000000 mask 3C00000000 write-back
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
total RAM covered: 31228M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 8M num_reg: 6 lose cover RAM: 0G
e820: update [mem 0x9fc00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9fc00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd190-0x000fd19f] mapped at [ffff9e36c00fd190]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9e36c0096000] 96000 size 24576
BRK [0x24022a000, 0x24022afff] PGTABLE
BRK [0x24022b000, 0x24022bfff] PGTABLE
BRK [0x24022c000, 0x24022cfff] PGTABLE
BRK [0x24022d000, 0x24022dfff] PGTABLE
BRK [0x24022e000, 0x24022efff] PGTABLE
BRK [0x24022f000, 0x24022ffff] PGTABLE
BRK [0x240230000, 0x240230fff] PGTABLE
BRK [0x240231000, 0x240231fff] PGTABLE
BRK [0x240232000, 0x240232fff] PGTABLE
BRK [0x240233000, 0x240233fff] PGTABLE
RAMDISK: [mem 0x32f0f000-0x3577efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F03C0 000024 (v02 INTEL )
ACPI: XSDT 0x000000009FB39120 000084 (v01 INTEL S5000PSL 00000000 INTL 01000013)
ACPI: FACP 0x000000009FB37000 0000F4 (v03 INTEL S5000PSL 00000000 INTL 01000013)
ACPI: DSDT 0x000000009FB30000 0057F6 (v02 INTEL S5000PSL 00000001 INTL 01000013)
ACPI: FACS 0x000000009FAAC000 000040
ACPI: FACS 0x000000009FAAC000 000040
ACPI: APIC 0x000000009FB36000 0000C8 (v01 INTEL S5000PSL 00000000 INTL 01000013)
ACPI: SPCR 0x000000009FB2F000 000050 (v01 INTEL S5000PSL 00000000 INTL 01000013)
ACPI: HPET 0x000000009FB2E000 000038 (v01 INTEL S5000PSL 00000001 INTL 01000013)
ACPI: MCFG 0x000000009FB2D000 00003C (v01 INTEL S5000PSL 00000001 INTL 01000013)
ACPI: SSDT 0x000000009FB2C000 000A14 (v02 INTEL EIST 00004000 INTL 01000013)
ACPI: SSDT 0x000000009FB2B000 000193 (v02 INTEL IPMI 00004000 INTL 01000013)
ACPI: SSDT 0x000000009FB2A000 0000CE (v02 INTEL CST 00004000 INTL 01000013)
ACPI: HEST 0x000000009FB29000 0000A8 (v01 INTEL S5000PSL 00000001 INTL 00000001)
ACPI: BERT 0x000000009FB28000 000030 (v01 INTEL S5000PSL 00000001 INTL 00000001)
ACPI: ERST 0x000000009FB27000 000230 (v01 INTEL S5000PSL 00000001 INTL 00000001)
ACPI: EINJ 0x000000009FB26000 000130 (v01 INTEL S5000PSL 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000045fffffff]
NODE_DATA(0) allocated [mem 0x45ffc8000-0x45fff2fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000045fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x000000009e1b9fff]
node 0: [mem 0x000000009e27c000-0x000000009fa31fff]
node 0: [mem 0x000000009fa9a000-0x000000009faabfff]
node 0: [mem 0x000000009fb1a000-0x000000009fb25fff]
node 0: [mem 0x000000009fb3a000-0x000000009fbfffff]
node 0: [mem 0x0000000100000000-0x000000045fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000045fffffff]
On node 0 totalpages: 4192751
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 10154 pages used for memmap
DMA32 zone: 649812 pages, LIFO batch:31
Normal zone: 55296 pages used for memmap
Normal zone: 3538944 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x000fffff]
PM: Registered nosave memory: [mem 0x9e1ba000-0x9e27bfff]
PM: Registered nosave memory: [mem 0x9fa32000-0x9fa99fff]
PM: Registered nosave memory: [mem 0x9faac000-0x9fb19fff]
PM: Registered nosave memory: [mem 0x9fb26000-0x9fb39fff]
PM: Registered nosave memory: [mem 0x9fc00000-0xafffffff]
PM: Registered nosave memory: [mem 0xb0000000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffc0bfff]
PM: Registered nosave memory: [mem 0xffc0c000-0xffffffff]
e820: [mem 0xb0000000-0xffbfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff9e3b1fc00000 s107992 r8192 d31272 u262144
pcpu-alloc: s107992 r8192 d31272 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4127216
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16379276K/16771004K available (9091K kernel code, 1667K rwdata, 3820K rodata, 2232K init, 2364K bss, 391728K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:524544 nr_irqs:896 16
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2826.133 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5652.26 BogoMIPS (lpj=11304532)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 36K
ftrace: allocating 34198 entries in 134 pages
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz (family: 0x6, model: 0x17, stepping: 0xa)
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (45218.12 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x9e1ba000-0x9e27bfff] (794624 bytes)
PM: Registering ACPI NVS region [mem 0x9faac000-0x9fb19fff] (450560 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 9:27:43, date: 09/24/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xa0000000-0xafffffff] (base 0xa0000000)
PCI: MMCONFIG at [mem 0xa0000000-0xafffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits) (20160930/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB._OSC] (Node ffff9e3b0f0abcf8), AE_AML_BUFFER_LIMIT (20160930/psparse-543)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io 0x0ca2] (ignored, not CPU addressable)
acpi PNP0A03:00: host bridge window [io 0x0ca3] (ignored, not CPU addressable)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0ca1 window]
pci_bus 0000:00: root bus resource [io 0x0ca4-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfdffffff window]
pci_bus 0000:00: root bus resource [mem 0xfe700000-0xfe7003ff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:25d8] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:25f7] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:25e3] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:25f8] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:25e5] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [8086:25f9] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:25e7] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:1a38] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xfe700000-0xfe7003ff 64bit]
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000
pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000
pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000
pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000
pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000
pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x4080-0x409f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x4040-0x405f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x4020-0x403f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xcbe00400-0xcbe007ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x40d8-0x40df]
pci 0000:00:1f.1: reg 0x14: [io 0x40ec-0x40ef]
pci 0000:00:1f.1: reg 0x18: [io 0x40d0-0x40d7]
pci 0000:00:1f.1: reg 0x1c: [io 0x40e8-0x40eb]
pci 0000:00:1f.1: reg 0x20: [io 0x40b0-0x40bf]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.2: [8086:2680] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0x40c8-0x40cf]
pci 0000:00:1f.2: reg 0x14: [io 0x40e4-0x40e7]
pci 0000:00:1f.2: reg 0x18: [io 0x40c0-0x40c7]
pci 0000:00:1f.2: reg 0x1c: [io 0x40e0-0x40e3]
pci 0000:00:1f.2: reg 0x20: [io 0x40a0-0x40af]
pci 0000:00:1f.2: reg 0x24: [mem 0xcbe00000-0xcbe003ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:269b] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
pci 0000:01:00.0: [8086:3500] type 01 class 0x060400
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.3: [8086:350c] type 01 class 0x060400
pci 0000:01:00.3: PME# supported from D0 D3hot D3cold
pci 0000:01:00.3: System wakeup disabled by ACPI
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 01-05]
pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.0: bridge window [mem 0xcb000000-0xcbcfffff]
pci 0000:02:00.0: [8086:3510] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:02:02.0: [8086:3518] type 01 class 0x060400
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
pci 0000:02:02.0: System wakeup disabled by ACPI
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:01:00.0: bridge window [mem 0xcb000000-0xcbbfffff]
pci 0000:03:00.0: [9005:0285] type 00 class 0x010400
pci 0000:03:00.0: reg 0x10: [mem 0xcba00000-0xcbbfffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:03:00.0: supports D1
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0xcba00000-0xcbbfffff]
pci 0000:04:00.0: [8086:1096] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xcb820000-0xcb83ffff]
pci 0000:04:00.0: reg 0x14: [mem 0xcb400000-0xcb7fffff]
pci 0000:04:00.0: reg 0x18: [io 0x3020-0x303f]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: [8086:1096] type 00 class 0x020000
pci 0000:04:00.1: reg 0x10: [mem 0xcb800000-0xcb81ffff]
pci 0000:04:00.1: reg 0x14: [mem 0xcb000000-0xcb3fffff]
pci 0000:04:00.1: reg 0x18: [io 0x3000-0x301f]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:02:02.0: PCI bridge to [bus 04]
pci 0000:02:02.0: bridge window [io 0x3000-0x3fff]
pci 0000:02:02.0: bridge window [mem 0xcb000000-0xcb8fffff]
pci 0000:01:00.3: PCI bridge to [bus 05]
pci 0000:00:03.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [10de:0191] type 00 class 0x030000
pci 0000:07:00.0: reg 0x10: [mem 0xca000000-0xcaffffff]
pci 0000:07:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:07:00.0: reg 0x1c: [mem 0xc8000000-0xc9ffffff 64bit]
pci 0000:07:00.0: reg 0x24: [io 0x2000-0x207f]
pci 0000:07:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:04.0: PCI bridge to [bus 07]
pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:04.0: bridge window [mem 0xc8000000-0xcaffffff]
pci 0000:00:04.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 08]
pci 0000:00:06.0: PCI bridge to [bus 09]
pci 0000:00:07.0: PCI bridge to [bus 0a]
pci 0000:00:1c.0: PCI bridge to [bus 0b]
pci 0000:0c:0c.0: [1002:515e] type 00 class 0x030000
pci 0000:0c:0c.0: reg 0x10: [mem 0xc0000000-0xc7ffffff pref]
pci 0000:0c:0c.0: reg 0x14: [io 0x1000-0x10ff]
pci 0000:0c:0c.0: reg 0x18: [mem 0xcbd00000-0xcbd0ffff]
pci 0000:0c:0c.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:0c:0c.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0xcbd00000-0xcbdfffff]
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0ca1 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0ca4-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000fffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xb0000000-0xfdffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfe700000-0xfe7003ff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7 10 11)
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI: Enabled 2 GPEs in block 20 to 3F
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:07:00.0: vgaarb: setting as boot VGA device
pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:0c:0c.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:0c:0c.0: vgaarb: bridge control possible
pci 0000:07:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
e820: reserve RAM buffer [mem 0x9e1ba000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9fa32000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9faac000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9fb26000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xa0000000-0xafffffff] has been reserved
system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: [mem 0xfe600000-0xfe6fffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0500-0x053f] has been reserved
system 00:02: [io 0x0400-0x047f] has been reserved
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: [io 0x0ca0-0x0caf] could not be reserved
system 00:02: [io 0x0161] has been reserved
system 00:02: [io 0x0162] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:03:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:07:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:0c:0c.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xcbf00000-0xcc0fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xcc100000-0xcc2fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:03:00.0: BAR 6: no space for [mem size 0x00080000 pref]
pci 0000:03:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0xcba00000-0xcbbfffff]
pci 0000:02:02.0: PCI bridge to [bus 04]
pci 0000:02:02.0: bridge window [io 0x3000-0x3fff]
pci 0000:02:02.0: bridge window [mem 0xcb000000-0xcb8fffff]
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [io 0x3000-0x3fff]
pci 0000:01:00.0: bridge window [mem 0xcb000000-0xcbbfffff]
pci 0000:01:00.3: PCI bridge to [bus 05]
pci 0000:00:02.0: PCI bridge to [bus 01-05]
pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.0: bridge window [mem 0xcb000000-0xcbcfffff]
pci 0000:00:03.0: PCI bridge to [bus 06]
pci 0000:07:00.0: BAR 6: no space for [mem size 0x00020000 pref]
pci 0000:07:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
pci 0000:00:04.0: PCI bridge to [bus 07]
pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:04.0: bridge window [mem 0xc8000000-0xcaffffff]
pci 0000:00:04.0: bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 08]
pci 0000:00:06.0: PCI bridge to [bus 09]
pci 0000:00:07.0: PCI bridge to [bus 0a]
pci 0000:00:1c.0: PCI bridge to [bus 0b]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xcbf00000-0xcc0fffff]
pci 0000:00:1c.0: bridge window [mem 0xcc100000-0xcc2fffff 64bit pref]
pci 0000:0c:0c.0: BAR 6: assigned [mem 0xcbd20000-0xcbd3ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 0c]
pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1e.0: bridge window [mem 0xcbd00000-0xcbdfffff]
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0ca1 window]
pci_bus 0000:00: resource 5 [io 0x0ca4-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000fffff window]
pci_bus 0000:00: resource 9 [mem 0xb0000000-0xfdffffff window]
pci_bus 0000:00: resource 10 [mem 0xfe700000-0xfe7003ff window]
pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xcb000000-0xcbcfffff]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xcb000000-0xcbbfffff]
pci_bus 0000:03: resource 1 [mem 0xcba00000-0xcbbfffff]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xcb000000-0xcb8fffff]
pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:07: resource 1 [mem 0xc8000000-0xcaffffff]
pci_bus 0000:07: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:0b: resource 1 [mem 0xcbf00000-0xcc0fffff]
pci_bus 0000:0b: resource 2 [mem 0xcc100000-0xcc2fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:0c: resource 1 [mem 0xcbd00000-0xcbdfffff]
pci_bus 0000:0c: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref]
pci_bus 0000:0c: resource 4 [io 0x0000-0x0ca1 window]
pci_bus 0000:0c: resource 5 [io 0x0ca4-0x0cf7 window]
pci_bus 0000:0c: resource 6 [io 0x0d00-0xffff window]
pci_bus 0000:0c: resource 7 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0c: resource 8 [mem 0x000c0000-0x000fffff window]
pci_bus 0000:0c: resource 9 [mem 0xb0000000-0xfdffffff window]
pci_bus 0000:0c: resource 10 [mem 0xfe700000-0xfe7003ff window]
pci_bus 0000:0c: resource 11 [mem 0xfed40000-0xfed44fff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:07:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 41408K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9a1ba000-0x9e1ba000] (64MB) mapped at [ffff9e375a1ba000-ffff9e375e1b9fff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1506245262.920:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: does not run on family 6 model 23
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: using zlib compression
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 20
ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 20
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xcbe00400
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-35-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-35-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004060
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.10.0-35-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 23, io base 0x00004040
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.10.0-35-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 22, io base 0x00004020
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.10.0-35-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x1067a, pf=0x40, revision=0xa0b
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 44f20f5f04049cb3cdfa78390d63fc0732e43e8e'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 1:701:475
rtc_cmos 00:01: setting system clock to 2017-09-24 09:27:44 UTC (1506245264)
ACPI: Invalid _PSD:coord_type
ACPI: Invalid _PSD:coord_type
ACPI: Invalid _PSD:coord_type
ACPI: Invalid _PSD:coord_type
ACPI: Invalid _PSD:coord_type
ACPI: Invalid _PSD:coord_type
ACPI: Invalid _PSD:coord_type
ACPI: Invalid _PSD:coord_type
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 0: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 0: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 0: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 0: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 0: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 0: 0x80000000 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 0
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 1: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 1: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 1: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 1: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 1: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 1: 0x80000000 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 1
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 2: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 2: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 2: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 2: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 2: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 2: 0x80000000 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 2
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 3: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 3: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 3: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 3: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 3: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 3: 0x80000000 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 3
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 4: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 4: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 4: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 4: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 4: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 4: 0x80000000 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 4
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 5: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 5: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 5: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 5: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 5: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 5: 0x80000000 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 5
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 6: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 6: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 6: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 6: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 6: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 6: 0x80000000 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 6
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 7: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 7: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 7: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 7: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 7: 0x80000000 MHz
[Firmware Bug]: ACPI: Invalid BIOS _PSS frequency found for processor 7: 0x80000000 MHz
[Firmware Bug]: ACPI: No valid BIOS _PSS frequency found for processor 7
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata1.00: ATAPI: Optiarc DVD RW AD-7170A, 1.02, max UDMA/66
ata1.00: configured for UDMA/66
scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7170A 1.02 PQ: 0 ANSI: 5
sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 2232K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1132K
Freeing unused kernel memory: 276K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
Adaptec aacraid driver 1.2.1[50834]-custom
aacraid 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[drm] Initialized
aacraid: Comm Interface enabled
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
radeon 0000:0c:0c.0: enabling device (0380 -> 0383)
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x8086:0x3476 0x02).
[drm] register mmio base: 0xCBD00000
[drm] register mmio size: 65536
radeon 0000:0c:0c.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x7373
radeon 0000:0c:0c.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x7373
[drm:radeon_get_bios [radeon]] *ERROR* Unable to locate a BIOS ROM
radeon 0000:0c:0c.0: Card not posted and no BIOS - ignoring
radeon 0000:0c:0c.0: Fatal error during GPU init
[drm] radeon: finishing device.
[TTM] Memory type 2 has not been initialized
e1000e 0000:04:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:15:17:64:a1:c4
[drm] radeon: cp finalized
e1000e 0000:04:00.0 eth0: Intel(R) PRO/1000 Network Connection
x86/PAT: systemd-udevd:210 freeing invalid memtype [mem 0x00000000-0xffffffffffffffff]
e1000e 0000:04:00.0 eth0: MAC: 5, PHY: 5, PBA No: 400000-000
radeon: probe of 0000:0c:0c.0 failed with error -22
e1000e 0000:04:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:04:00.1 eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:64:a1:c5
e1000e 0000:04:00.1 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:04:00.1 eth1: MAC: 5, PHY: 5, PBA No: 400000-000
e1000e 0000:04:00.1 enp4s0f1: renamed from eth1
e1000e 0000:04:00.0 enp4s0f0: renamed from eth0
usb 2-1: new low-speed USB device number 2 using uhci_hcd
AAC0: kernel 5.2-0[16116] Jun 25 2008
AAC0: monitor 5.2-0[16116]
AAC0: bios 5.2-0[16116]
AAC0: serial 8B31107FD4D
AAC0: Non-DASD support enabled.
AAC0: 64bit support enabled.
aacraid 0000:03:00.0: 64 Bit DAC enabled
scsi host4: aacraid
scsi 4:0:0:0: Direct-Access Adaptec OS V1.0 PQ: 0 ANSI: 2
scsi 4:0:1:0: Direct-Access Adaptec Storage V1.0 PQ: 0 ANSI: 2
scsi 4:1:0:0: Direct-Access WDC WD1000FYPS-0 02.0 PQ: 1 ANSI: 5
usb 2-1: New USB device found, idVendor=03f0, idProduct=0024
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: HP Basic USB Keyboard
usb 2-1: Manufacturer: CHICONY
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:03F0:0024.0001/input/input6
hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1/input0
scsi 4:1:1:0: Direct-Access WDC WD1000FYPS-0 02.0 PQ: 1 ANSI: 5
scsi 4:1:4:0: Direct-Access WDC WD7500AAKS-0 30.0 PQ: 1 ANSI: 5
scsi 4:1:5:0: Direct-Access WDC WD7500AAKS-0 30.0 PQ: 1 ANSI: 5
scsi 4:1:6:0: Direct-Access WDC WD7500AAKS-0 30.0 PQ: 1 ANSI: 5
tsc: Refined TSC clocksource calibration: 2826.249 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28bd1d33ea1, max_idle_ns: 440795266768 ns
scsi 4:1:7:0: Direct-Access WDC WD7500AAKS-0 30.0 PQ: 1 ANSI: 5
random: fast init done
sd 4:0:0:0: [sda] 1952428032 512-byte logical blocks: (1000 GB/931 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 12 00 10 08
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 4:0:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
sd 4:0:1:0: [sdb] 4391415808 512-byte logical blocks: (2.25 TB/2.04 TiB)
sd 4:0:1:0: [sdb] Write Protect is off
sd 4:0:1:0: [sdb] Mode Sense: 12 00 10 08
sd 4:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 4:0:1:0: Attached scsi generic sg2 type 0
sd 4:0:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
sda: sda1
scsi 4:1:0:0: Attached scsi generic sg3 type 0
scsi 4:1:1:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sda] Attached SCSI removable disk
scsi 4:1:4:0: Attached scsi generic sg5 type 0
scsi 4:1:5:0: Attached scsi generic sg6 type 0
scsi 4:1:6:0: Attached scsi generic sg7 type 0
scsi 4:1:7:0: Attached scsi generic sg8 type 0
sdb: sdb1
sd 4:0:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
sd 4:0:1:0: [sdb] Attached SCSI removable disk
usb 2-2: new low-speed USB device number 3 using uhci_hcd
usb 2-2: New USB device found, idVendor=045e, idProduct=00f0
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Microsoft ® Laser Mouse 6000
usb 2-2: Manufacturer: Microsoft Corporation
input: Microsoft Corporation Microsoft ® Laser Mouse 6000 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:045E:00F0.0002/input/input7
hid-generic 0003:045E:00F0.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Corporation Microsoft ® Laser Mouse 6000] on usb-0000:00:1d.0-2/input0
clocksource: Switched to clocksource tsc
random: crng init done
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Reached target User and Group Name Lookups.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[1445]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1506245292.096:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1623 comm="apparmor_parser"
audit: type=1400 audit(1506245292.096:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1620 comm="apparmor_parser"
audit: type=1400 audit(1506245292.096:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1620 comm="apparmor_parser"
audit: type=1400 audit(1506245292.096:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1616 comm="apparmor_parser"
audit: type=1400 audit(1506245292.096:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1616 comm="apparmor_parser"
audit: type=1400 audit(1506245292.096:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1621 comm="apparmor_parser"
audit: type=1400 audit(1506245292.096:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1621 comm="apparmor_parser"
audit: type=1400 audit(1506245292.096:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=1621 comm="apparmor_parser"
audit: type=1400 audit(1506245292.096:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1617 comm="apparmor_parser"
audit: type=1400 audit(1506245292.096:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1617 comm="apparmor_parser"
Adding 2097148k swap on /swapfile. Priority:-1 extents:6 across:2260988k FS
ipmi message handler version 39.2
ipmi device interface
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: SMBIOS-specified kcs state machine: duplicate
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
i5k_amb i5k_amb.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i5000_edac.c controller I5000: DEV 0000:00:10.0 (POLLED)
EDAC PCI0: Giving out device to module i5000_edac controller EDAC PCI controller: DEV 0000:00:10.0 (POLLED)
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x000000000000042B (\_SB.PCI0.LPC.TPM.GPE0) (20160930/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x000000000000042B (\GPE0) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000539-0x0000000000000539 (\_SB.PCI0.LPC.TPM.GPLV) (20160930/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000539-0x0000000000000539 (\GPLV) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000052F (\_SI.SIOR) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
ipmi_si IPI0001:00: Found new BMC (man_id: 0x000157, prod_id: 0x0029, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
IPMI SSIF Interface driver
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia 0000:07:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:07:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.102 Mon Jan 16 13:06:29 PST 2017
nvidia_uvm: Loaded the UVM driver, major device number 240
IPv6: ADDRCONF(NETDEV_UP): enp4s0f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0f0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0f1: link is not ready
e1000e: enp4s0f1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0f1: link becomes ready
EXT4-fs (sdb1): recovery complete
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
perf: interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
perf: interrupt took too long (3149 > 3142), lowering kernel.perf_event_max_sample_rate to 63500
perf: interrupt took too long (3945 > 3936), lowering kernel.perf_event_max_sample_rate to 50500
perf: interrupt took too long (4932 > 4931), lowering kernel.perf_event_max_sample_rate to 40500