dmesg - mat2017
Linux version 4.12.8-2-ARCH (builduser@foutrelis) (gcc version 7.2.0 (GCC) ) #1 SMP PREEMPT Fri Aug 18 14:08:02 UTC 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x0000000077952fff] usable
BIOS-e820: [mem 0x0000000077953000-0x0000000078514fff] reserved
BIOS-e820: [mem 0x0000000078515000-0x0000000078791fff] usable
BIOS-e820: [mem 0x0000000078792000-0x0000000079364fff] ACPI NVS
BIOS-e820: [mem 0x0000000079365000-0x000000007b25efff] reserved
BIOS-e820: [mem 0x000000007b25f000-0x000000007b2bafff] type 20
BIOS-e820: [mem 0x000000007b2bb000-0x000000007b2bbfff] usable
BIOS-e820: [mem 0x000000007b2bc000-0x000000007b341fff] reserved
BIOS-e820: [mem 0x000000007b342000-0x000000007b557fff] usable
BIOS-e820: [mem 0x000000007b558000-0x000000007bff8fff] reserved
BIOS-e820: [mem 0x000000007bff9000-0x000000007bffffff] usable
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000187fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0x78b9a000 ACPI 2.0=0x78b9a000 ESRT=0x7b1e9b98 SMBIOS=0xf0570 MPS=0xfd630
SMBIOS 2.8 present.
DMI: Supermicro X10SRA/X10SRA, BIOS 1.0a 11/27/2014
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1880000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 380000000000 mask 3FC000000000 uncachable
2 base 0000E0000000 mask 3FFFF0000000 write-through
3 base 0000F0000000 mask 3FFFFF800000 write-through
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd960-0x000fd96f] mapped at [ffff8a29800fd960]
esrt: Reserving ESRT space from 0x000000007b1e9b98 to 0x000000007b1e9bd0.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8a2980098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x1e9d5f000, 0x1e9d5ffff] PGTABLE
BRK [0x1e9d60000, 0x1e9d60fff] PGTABLE
BRK [0x1e9d61000, 0x1e9d61fff] PGTABLE
BRK [0x1e9d62000, 0x1e9d62fff] PGTABLE
BRK [0x1e9d63000, 0x1e9d63fff] PGTABLE
BRK [0x1e9d64000, 0x1e9d64fff] PGTABLE
BRK [0x1e9d65000, 0x1e9d65fff] PGTABLE
BRK [0x1e9d66000, 0x1e9d66fff] PGTABLE
BRK [0x1e9d67000, 0x1e9d67fff] PGTABLE
BRK [0x1e9d68000, 0x1e9d68fff] PGTABLE
BRK [0x1e9d69000, 0x1e9d69fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x37387000-0x379bafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000078B9A000 000024 (v02 SUPERM)
ACPI: XSDT 0x0000000078B9A0A0 0000BC (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FACP 0x0000000078BC7F70 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: DSDT 0x0000000078B9A1F0 02DD79 (v02 SUPERM SMCI--MB 01072009 INTL 20091013)
ACPI: FACS 0x0000000079361F80 000040
ACPI: APIC 0x0000000078BC8080 0000C8 (v03 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FPDT 0x0000000078BC8148 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FIDT 0x0000000078BC8190 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: MCFG 0x0000000078BC8230 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: UEFI 0x0000000078BC8270 000042 (v01 SUPERM SMCI--MB 01072009 00000000)
ACPI: BDAT 0x0000000078BC82B8 000030 (v01 SUPERM SMCI--MB 00000000 INTL 20091013)
ACPI: HPET 0x0000000078BC82E8 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: MSCT 0x0000000078BC8320 000090 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: PMCT 0x0000000078BC83B0 000064 (v01 SUPERM SMCI--MB 00000000 INTL 20091013)
ACPI: SLIT 0x0000000078BC8418 00002D (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: SRAT 0x0000000078BC8448 000E58 (v03 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: WDDT 0x0000000078BC92A0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013)
ACPI: SSDT 0x0000000078BC92E0 00EDE7 (v01 SUPERM PmMgt 00000001 INTL 20120913)
ACPI: BGRT 0x0000000078BD80C8 000038 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: SSDT 0x0000000078BD8100 00211F (v02 SUPERM SpsNm 00000002 INTL 20120913)
ACPI: SSDT 0x0000000078BDA220 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913)
ACPI: PRAD 0x0000000078BDA288 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913)
ACPI: DMAR 0x0000000078BDA390 0000D4 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x187fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x187fffffff] -> [mem 0x00000000-0x187fffffff]
NODE_DATA(0) allocated [mem 0x187fffa000-0x187fffefff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000187fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000077952fff]
node 0: [mem 0x0000000078515000-0x0000000078791fff]
node 0: [mem 0x000000007b2bb000-0x000000007b2bbfff]
node 0: [mem 0x000000007b342000-0x000000007b557fff]
node 0: [mem 0x000000007bff9000-0x000000007bffffff]
node 0: [mem 0x0000000100000000-0x000000187fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000187fffffff]
On node 0 totalpages: 25132429
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 7608 pages used for memmap
DMA32 zone: 486894 pages, LIFO batch:31
Normal zone: 385024 pages used for memmap
Normal zone: 24641536 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x77953000-0x78514fff]
PM: Registered nosave memory: [mem 0x78792000-0x79364fff]
PM: Registered nosave memory: [mem 0x79365000-0x7b25efff]
PM: Registered nosave memory: [mem 0x7b25f000-0x7b2bafff]
PM: Registered nosave memory: [mem 0x7b2bc000-0x7b341fff]
PM: Registered nosave memory: [mem 0x7b558000-0x7bff8fff]
PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff8a41ffc00000 s106328 r8192 d28840 u262144
pcpu-alloc: s106328 r8192 d28840 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 24739708
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 98700228K/100529716K available (6539K kernel code, 1124K rwdata, 2048K rodata, 1324K init, 912K bss, 1829488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 27933 entries in 110 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:896 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3491.920 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6986.83 BogoMIPS (lpj=11639733)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 24K
smpboot: Max logical packages: 2
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000007b1f8000 end: 0x0000007b206fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1620 v3 @ 3.50GHz (family: 0x6, model: 0x3f, stepping: 0x2)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (55905.15 BogoMIPS)
sched_clock: Marking stable (903333244, 0)->(905477665, -2144421)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
PM: Registering ACPI NVS region [mem 0x78792000-0x79364fff] (12398592 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 11:55:14, date: 09/03/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.2: [8086:2f06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfbf1d000-0xfbf1dfff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf110-0xf117]
pci 0000:00:11.4: reg 0x14: [io 0xf100-0xf103]
pci 0000:00:11.4: reg 0x18: [io 0xf0f0-0xf0f7]
pci 0000:00:11.4: reg 0x1c: [io 0xf0e0-0xf0e3]
pci 0000:00:11.4: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:11.4: reg 0x24: [mem 0xfbf1c000-0xfbf1c7ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfbf00000-0xfbf0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbf18000-0xfbf183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbf10000-0xfbf13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:8d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbf17000-0xfbf173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbf16000-0xfbf167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbf15000-0xfbf150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:1f.6: [8086:8d24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xfbf14000-0xfbf14fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1002:6658] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x24: [mem 0xfbe00000-0xfbe3ffff]
pci 0000:03:00.0: reg 0x30: [mem 0xfbe40000-0xfbe5ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.1: [1002:aac0] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfbe60000-0xfbe63fff 64bit]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: bridge window [io 0xe000-0xefff]
pci 0000:00:02.2: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.2: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfbd00000-0xfbd07fff 64bit]
pci 0000:05:00.0: PME# supported from D3cold
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:06:00.0: [8086:1533] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xfbc00000-0xfbc7ffff]
pci 0000:06:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:06:00.0: reg 0x1c: [mem 0xfbc80000-0xfbc83fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:07:00.0: [8086:1533] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xfbb00000-0xfbb7ffff]
pci 0000:07:00.0: reg 0x18: [io 0xc000-0xc01f]
pci 0000:07:00.0: reg 0x1c: [mem 0xfbb80000-0xfbb83fff]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 07]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:08:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xfba00000-0xfba07fff 64bit]
pci 0000:08:00.0: PME# supported from D3cold
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:09:00.0: [1b21:1182] type 01 class 0x060400
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 09-0c]
pci 0000:0a:03.0: [1b21:1182] type 01 class 0x060400
pci 0000:0a:03.0: PME# supported from D0 D3hot D3cold
pci 0000:0a:07.0: [1b21:1182] type 01 class 0x060400
pci 0000:0a:07.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PCI bridge to [bus 0a-0c]
pci 0000:0a:03.0: PCI bridge to [bus 0b]
pci 0000:0a:07.0: PCI bridge to [bus 0c]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 3 GPEs in block 00 to 3F
pci 0000:03:00.0: vgaarb: setting as boot VGA device
pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:03:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x77953000-0x77ffffff]
e820: reserve RAM buffer [mem 0x78792000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b2bc000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b558000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
system 00:02: [io 0x0a40-0x0a4f] has been reserved
system 00:02: [io 0x0a60-0x0a6f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: bridge window [io 0xe000-0xefff]
pci 0000:00:02.2: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.2: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.3: PCI bridge to [bus 07]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:0a:03.0: PCI bridge to [bus 0b]
pci 0000:0a:07.0: PCI bridge to [bus 0c]
pci 0000:09:00.0: PCI bridge to [bus 0a-0c]
pci 0000:00:1c.7: PCI bridge to [bus 09-0c]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf07fffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:08: resource 1 [mem 0xfba00000-0xfbafffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 6352K
DMAR: [Firmware Bug]: RMRR entry for device 05:00.0 is broken - applying workaround
DMAR: [Firmware Bug]: RMRR entry for device 08:00.0 is broken - applying workaround
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x69513000-0x6d513000] (64MB) mapped at [ffff8a29e9513000-ffff8a29ed512fff]
Intel CQM monitoring enabled
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=40 max_order=25 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.0: AER enabled with IRQ 25
pcieport 0000:00:02.0: AER enabled with IRQ 27
pcieport 0000:00:02.2: AER enabled with IRQ 28
pcieport 0000:00:03.0: AER enabled with IRQ 30
pcieport 0000:00:01.0: Signaling PME with IRQ 25
pcieport 0000:00:02.0: Signaling PME with IRQ 27
pcieport 0000:00:02.2: Signaling PME with IRQ 28
pcieport 0000:00:03.0: Signaling PME with IRQ 30
pcieport 0000:00:1c.0: Signaling PME with IRQ 31
pcieport 0000:00:1c.2: Signaling PME with IRQ 32
pcieport 0000:00:1c.3: Signaling PME with IRQ 33
pcieport 0000:00:1c.4: Signaling PME with IRQ 34
pcieport 0000:00:1c.7: Signaling PME with IRQ 35
efifb: probing for efifb
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
efifb: framebuffer at 0xe0000000, using 7552k, total 7552k
efifb: mode is 1600x1200x32, linelength=6400, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 200x75
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x306f2, pf=0x1, revision=0x27
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 1:300:933
acpi device:fd: hash matches
rtc_cmos 00:00: setting system clock to 2017-09-03 11:55:15 UTC (1504439715)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1324K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1640K
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 32 is not supported
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 15 ports detected
libata version 3.00 loaded.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:05:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x10000410
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
ehci-pci 0000:00:1a.0: EHCI Host Controller
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbf18000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:08:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x10000410
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 7
usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
ehci-pci 0000:00:1d.0: EHCI Host Controller
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 8
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfbf17000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf1c000 port 0xfbf1c100 irq 56
ata2: SATA max UDMA/133 abar m2048@0xfbf1c000 port 0xfbf1c180 irq 56
ata3: SATA max UDMA/133 abar m2048@0xfbf1c000 port 0xfbf1c200 irq 56
ata4: SATA max UDMA/133 abar m2048@0xfbf1c000 port 0xfbf1c280 irq 56
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata5: SATA max UDMA/133 abar m2048@0xfbf16000 port 0xfbf16100 irq 57
ata6: SATA max UDMA/133 abar m2048@0xfbf16000 port 0xfbf16180 irq 57
ata7: SATA max UDMA/133 abar m2048@0xfbf16000 port 0xfbf16200 irq 57
ata8: SATA max UDMA/133 abar m2048@0xfbf16000 port 0xfbf16280 irq 57
ata9: SATA max UDMA/133 abar m2048@0xfbf16000 port 0xfbf16300 irq 57
ata10: SATA max UDMA/133 abar m2048@0xfbf16000 port 0xfbf16380 irq 57
usb 1-7: new high-speed USB device number 2 using xhci_hcd
usb 5-1: new high-speed USB device number 2 using ehci-pci
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 4 ports detected
usb 8-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 6 ports detected
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: HPA detected: current 3907027055, native 3907029168
ata9.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata9.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata7.00: ATA-9: ST2000DM001-1CH164, CC29, max UDMA/133
ata7.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata9.00: configured for UDMA/133
ata6.00: supports DRM functions and may not be fully accessible
ata7.00: configured for UDMA/133
ata6.00: disabling queued TRIM support
ata6.00: ATA-9: Samsung SSD 850 PRO 512GB, EXM02B6Q, max UDMA/133
ata6.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: disabling queued TRIM support
ata6.00: configured for UDMA/133
usb 2-6: new SuperSpeed USB device number 2 using xhci_hcd
hub 2-6:1.0: USB hub found
hub 2-6:1.0: 4 ports detected
hub 8-1:1.0: USB hub found
hub 8-1:1.0: 8 ports detected
ata5.00: ATA-8: TOSHIBA MD04ACA400, FP2A, max UDMA/100
ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/100
scsi 4:0:0:0: Direct-Access ATA TOSHIBA MD04ACA4 FP2A PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
usb 1-7.3: new high-speed USB device number 3 using xhci_hcd
scsi 6:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC29 PQ: 0 ANSI: 5
ata8.00: ATA-8: TOSHIBA MD04ACA400, FP2A, max UDMA/100
ata8.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/100
scsi 7:0:0:0: Direct-Access ATA TOSHIBA MD04ACA4 FP2A PQ: 0 ANSI: 5
hub 1-7.3:1.0: USB hub found
hub 1-7.3:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 3491.915 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32557b87bec, max_idle_ns: 440795348858 ns
scsi 8:0:0:0: Direct-Access ATA WDC WD20EZRX-00D 0A80 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 4:0:0:0: [sda] 4096-byte physical blocks
sd 7:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 7:0:0:0: [sdd] 4096-byte physical blocks
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 6:0:0:0: [sdc] 4096-byte physical blocks
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:0:0: [sde] 3907027055 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 8:0:0:0: [sde] 4096-byte physical blocks
sd 8:0:0:0: [sde] Write Protect is off
sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 5:0:0:0: [sdb] Attached SCSI disk
usb 2-6.3: new SuperSpeed USB device number 3 using xhci_hcd
random: fast init done
sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI disk
sde: sde1
sd 8:0:0:0: [sde] Attached SCSI disk
hub 2-6.3:1.0: USB hub found
hub 2-6.3:1.0: 4 ports detected
usb 1-7.4: new high-speed USB device number 4 using xhci_hcd
sda: sda2
sd 4:0:0:0: [sda] Attached SCSI disk
sdd: sdd2
sd 7:0:0:0: [sdd] Attached SCSI disk
raid6: sse2x1 gen() 9880 MB/s
hub 1-7.4:1.0: USB hub found
hub 1-7.4:1.0: 3 ports detected
raid6: sse2x1 xor() 8608 MB/s
raid6: sse2x2 gen() 14896 MB/s
raid6: sse2x2 xor() 9532 MB/s
raid6: sse2x4 gen() 17465 MB/s
raid6: sse2x4 xor() 10965 MB/s
usb 1-7.4.1: new full-speed USB device number 5 using xhci_hcd
raid6: avx2x1 gen() 24462 MB/s
raid6: avx2x1 xor() 17005 MB/s
raid6: avx2x2 gen() 29253 MB/s
usb 1-7.4.3: new full-speed USB device number 6 using xhci_hcd
raid6: avx2x2 xor() 17589 MB/s
raid6: avx2x4 gen() 33417 MB/s
raid6: avx2x4 xor() 20969 MB/s
raid6: using algorithm avx2x4 gen() 33417 MB/s
raid6: .... xor() 20969 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
clocksource: Switched to clocksource tsc
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device label large devid 7 transid 825506 /dev/sde1
BTRFS: device label large devid 3 transid 825506 /dev/sda2
BTRFS: device fsid c8b7991f-9633-4ec7-a5c6-91b016cc7261 devid 1 transid 164734 /dev/sdb2
BTRFS: device label large devid 4 transid 825506 /dev/sdd2
BTRFS: device label large devid 8 transid 825506 /dev/sdc1
BTRFS info (device sdb2): disk space caching is enabled
BTRFS info (device sdb2): has skinny extents
BTRFS info (device sdb2): detected SSD devices, enabling SSD mode
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Login Prompts.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice System Slice.
systemd[1]: Mounting NFSD configuration filesystem...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:0: Attached scsi generic sg4 type 0
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
BTRFS info (device sdb2): enabling auto defrag
BTRFS info (device sdb2): disk space caching is enabled
systemd-journald[259]: Received request to flush runtime journal from PID 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
ipmi message handler version 39.2
ipmi device interface
IPMI System Interface driver.
ipmi_si: Unable to find any System Interface(s)
i8042: PNP: No PS/2 controller found.
random: crng init done
BTRFS info (device sdc1): disk space caching is enabled
IPMI SSIF Interface driver
i8042: PNP: No PS/2 controller found.
i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
wmi: Mapper loaded
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
hidraw: raw HID events driver (C) Jiri Kosina
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input2
dca service started, version 1.12.1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
PTP clock support registered
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
A link change request failed with some changes committed already. Interface br0 may have been left with an inconsistent configuration, please check.
logitech-djreceiver 0003:046D:C52B.0004: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-7.4.3/input2
iTCO_vendor_support: vendor-support=0
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.1/1-7.4.1:1.0/0003:0853:0100.0001/input/input3
snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:03:00.1: Force to non-snoop mode
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Wellsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.2/0000:03:00.1/sound/card1/input4
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
[drm] radeon kernel modesetting enabled.
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC MC0: Giving out device to module sbridge_edac.c controller Haswell Socket#0: DEV 0000:ff:12.0 (INTERRUPT)
EDAC sbridge: Ver: 1.1.1
intel_rapl: Found RAPL domain package
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 760000) vs hw (e0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (BONAIRE 0x1002:0x6658 0x174B:0xE258 0x00).
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: C58204
radeon 0000:03:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:03:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 49438954 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading bonaire Microcode
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:2f06 = 57a3083/e
[drm] radeon: dpm initialized
[drm] Found UVD firmware Version: 1.64 Family ID: 9
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 8086:2f06 = 57a3083/e
[drm] PCIE gen 3 link speeds already enabled
hid-generic 0003:0853:0100.0001: input,hidraw1: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:14.0-7.4.1/input0
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.2/0000:03:00.1/sound/card1/input5
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.2/0000:03:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.2/0000:03:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.2/0000:03:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.2/0000:03:00.1/sound/card1/input9
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8a4185e97c00
radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff8a4185e97c04
radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff8a4185e97c08
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8a4185e97c0c
radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff8a4185e97c10
radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0xffffb03e0dc38d30
radeon 0000:03:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff8a4185e97c18
radeon 0000:03:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff8a4185e97c1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:03:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
BTRFS info (device sdc1): bdev /dev/sdd2 errs: wr 21496660, rd 21443610, flush 73, corrupt 19113, gen 37
BTRFS info (device sdc1): bdev /dev/sda2 errs: wr 0, rd 896, flush 0, corrupt 0, gen 3
[drm] ring test on 5 succeeded in 2 usecs
input: Logitech MX Master as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.3/1-7.4.3:1.2/0003:046D:C52B.0004/0003:046D:4041.0005/input/input18
logitech-hidpp-device 0003:046D:4041.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech MX Master] on usb-0000:00:14.0-7.4.3:1
input: Logitech K270 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.3/1-7.4.3:1.2/0003:046D:C52B.0004/0003:046D:4003.0006/input/input19
logitech-hidpp-device 0003:046D:4003.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:14.0-7.4.3:2
mousedev: PS/2 mouse device common for all mice
[drm] UVD initialized successfully.
pps pps0: new PPS source ptp0
igb 0000:06:00.0: added PHC on eth0
igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:4c:99:fa
igb 0000:06:00.0: eth0: PBA No: 013000-000
igb 0000:06:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[drm] ring test on 6 succeeded in 21 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
pps pps1: new PPS source ptp1
igb 0000:07:00.0: added PHC on eth1
igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:4c:99:fb
igb 0000:07:00.0: eth1: PBA No: 011000-000
igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:06:00.0 eno1: renamed from eth0
igb 0000:07:00.0 eno2: renamed from eth1
br0: port 1(eno1) entered blocking state
br0: port 1(eno1) entered disabled state
device eno1 entered promiscuous mode
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD6
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
[drm] fb mappable at 0xE0721000
[drm] vram apper at 0xE0000000
[drm] size 14745600
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 320x90
radeon 0000:03:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:03:00.0 on minor 0
[drm] amdgpu kernel modesetting enabled.
igb 0000:06:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
br0: port 1(eno1) entered blocking state
br0: port 1(eno1) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
lm92: Found Maxim MAX6635 chip
nct6775: Found NCT6776D/F or compatible chip at 0x4e:0xa30
NFSD: starting 90-second grace period (net ffffffffb6acddc0)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
tun: Universal TUN/TAP device driver, 1.6
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entered blocking state
br0: port 2(vnet0) entered forwarding state
fuse init (API version 7.26)
logitech-hidpp-device 0003:046D:4041.0005: HID++ 4.5 device connected.
usb 2-6.3.2: new SuperSpeed USB device number 4 using xhci_hcd
usb-storage 2-6.3.2:1.0: USB Mass Storage device detected
scsi host10: usb-storage 2-6.3.2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 10:0:0:0: Direct-Access TS-RDF5 SD Transcend TS38 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sdf] 31422464 512-byte logical blocks: (16.1 GB/15.0 GiB)
sd 10:0:0:0: [sdf] Write Protect is off
sd 10:0:0:0: [sdf] Mode Sense: 23 00 00 00
sd 10:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1
sd 10:0:0:0: [sdf] Attached SCSI removable disk
sdf: detected capacity change from 16088301568 to 0
usb 2-6.3.2: USB disconnect, device number 4
perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
usb 2-6.3.1: new SuperSpeed USB device number 5 using xhci_hcd
usb-storage 2-6.3.1:1.0: USB Mass Storage device detected
scsi host10: usb-storage 2-6.3.1:1.0
scsi 10:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sdf] 61457664 512-byte logical blocks: (31.5 GB/29.3 GiB)
sd 10:0:0:0: [sdf] Write Protect is off
sd 10:0:0:0: [sdf] Mode Sense: 23 00 00 00
sd 10:0:0:0: [sdf] No Caching mode page found
sd 10:0:0:0: [sdf] Assuming drive cache: write through
sdf: sdf1
sd 10:0:0:0: [sdf] Attached SCSI removable disk
FAT-fs (sdf1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sdf: detected capacity change from 31466323968 to 0
usb 2-6.3.1: USB disconnect, device number 5
perf: interrupt took too long (3136 > 3130), lowering kernel.perf_event_max_sample_rate to 63600
usb 1-7.3.1: new full-speed USB device number 7 using xhci_hcd
usb-storage 1-7.3.1:1.0: USB Mass Storage device detected
scsi host10: usb-storage 1-7.3.1:1.0
scsi 10:0:0:0: CD-ROM HDZB-CCB USB AutoRunDisk 1.00 PQ: 0 ANSI: 0
scsi 10:0:0:0: Attached scsi generic sg5 type 5
sr 10:0:0:0: [sr0] scsi-1 drive
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 10:0:0:0: Attached scsi CD-ROM sr0
usb 1-7.3.1: reset full-speed USB device number 7 using xhci_hcd
usb 1-7.3.1: reset full-speed USB device number 7 using xhci_hcd
usb 1-7.3.1: reset full-speed USB device number 7 using xhci_hcd
usb-storage 1-7.3.1:1.0: USB Mass Storage device detected
scsi host10: usb-storage 1-7.3.1:1.0
scsi 10:0:0:0: CD-ROM HDZB-CCB USB AutoRunDisk 1.00 PQ: 0 ANSI: 0
sr 10:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
sr 10:0:0:0: Attached scsi CD-ROM sr0
sr 10:0:0:0: Attached scsi generic sg5 type 5
perf: interrupt took too long (3934 > 3920), lowering kernel.perf_event_max_sample_rate to 50700
usb 1-7.3.1: USB disconnect, device number 7
gnome-shell[12799]: segfault at 7fd8c45fffe8 ip 00007fd96b0f0fe5 sp 00007ffd58d469f0 error 4 in libgjs.so.0.0.0[7fd96b0c9000+bb000]
usb 2-6.3.1: new SuperSpeed USB device number 6 using xhci_hcd
usb-storage 2-6.3.1:1.0: USB Mass Storage device detected
scsi host10: usb-storage 2-6.3.1:1.0
scsi 10:0:0:0: Direct-Access TS-RDF5 SD Transcend TS38 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sd 10:0:0:0: [sdf] Write Protect is off
sd 10:0:0:0: [sdf] Mode Sense: 23 00 00 00
sd 10:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1
sd 10:0:0:0: [sdf] Attached SCSI removable disk
sd 10:0:0:0: [sdf] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sd 10:0:0:0: [sdf] tag#0 Sense Key : 0x2 [current]
sd 10:0:0:0: [sdf] tag#0 ASC=0x3a ASCQ=0x0
sd 10:0:0:0: [sdf] tag#0 CDB: opcode=0x28 28 00 00 01 02 00 00 00 08 00
blk_update_request: I/O error, dev sdf, sector 66048
sd 10:0:0:0: [sdf] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sd 10:0:0:0: [sdf] tag#0 Sense Key : 0x2 [current]
sd 10:0:0:0: [sdf] tag#0 ASC=0x3a ASCQ=0x0
sd 10:0:0:0: [sdf] tag#0 CDB: opcode=0x28 28 00 00 01 02 00 00 00 08 00
blk_update_request: I/O error, dev sdf, sector 66048
Buffer I/O error on dev sdf1, logical block 4160, async page read
sdf: detected capacity change from 63864569856 to 0
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
sdf: detected capacity change from 63864569856 to 0
usb 2-6.3.1: USB disconnect, device number 6
usb 2-6.3.2: new SuperSpeed USB device number 7 using xhci_hcd
usb-storage 2-6.3.2:1.0: USB Mass Storage device detected
scsi host10: usb-storage 2-6.3.2:1.0
scsi 10:0:0:0: Direct-Access TS-RDF5 SD Transcend TS38 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sdf] Spinning up disk...
.
sd 10:0:0:0: [sdf] Attached SCSI removable disk
usb 2-6.3: USB disconnect, device number 3
usb 2-6.3.2: USB disconnect, device number 7
usb 1-7.3: USB disconnect, device number 3
usb 2-6.3: new SuperSpeed USB device number 8 using xhci_hcd
hub 2-6.3:1.0: USB hub found
hub 2-6.3:1.0: 4 ports detected
usb 2-6.3.2: new SuperSpeed USB device number 9 using xhci_hcd
usb-storage 2-6.3.2:1.0: USB Mass Storage device detected
scsi host10: usb-storage 2-6.3.2:1.0
usb 1-7.3: new high-speed USB device number 8 using xhci_hcd
hub 1-7.3:1.0: USB hub found
hub 1-7.3:1.0: 4 ports detected
scsi 10:0:0:0: Direct-Access TS-RDF5 SD Transcend TS38 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sdf] Spinning up disk...
.
sd 10:0:0:0: [sdf] Attached SCSI removable disk
usb 2-6.3.2: USB disconnect, device number 9
usb 2-6.3.3: new SuperSpeed USB device number 10 using xhci_hcd
usb-storage 2-6.3.3:1.0: USB Mass Storage device detected
scsi host10: usb-storage 2-6.3.3:1.0
scsi 10:0:0:0: Direct-Access TS-RDF5 SD Transcend TS38 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sdf] Spinning up disk...
.
sd 10:0:0:0: [sdf] Attached SCSI removable disk
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
sdf: detected capacity change from 63864569856 to 0
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
sdf: detected capacity change from 63864569856 to 0
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
sdf: detected capacity change from 63864569856 to 0
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
sdf: detected capacity change from 63864569856 to 0
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
usb 2-6.3.3: USB disconnect, device number 10
usb 2-6.3.1: new SuperSpeed USB device number 11 using xhci_hcd
usb-storage 2-6.3.1:1.0: USB Mass Storage device detected
scsi host10: usb-storage 2-6.3.1:1.0
scsi 10:0:0:0: Direct-Access TS-RDF5 SD Transcend TS38 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sd 10:0:0:0: [sdf] Write Protect is off
sd 10:0:0:0: [sdf] Mode Sense: 23 00 00 00
sd 10:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1
sd 10:0:0:0: [sdf] Attached SCSI removable disk
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
sd 10:0:0:0: [sdf] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sd 10:0:0:0: [sdf] tag#0 Sense Key : 0x2 [current]
sd 10:0:0:0: [sdf] tag#0 ASC=0x3a ASCQ=0x0
sd 10:0:0:0: [sdf] tag#0 CDB: opcode=0x28 28 00 00 00 90 00 00 00 08 00
blk_update_request: I/O error, dev sdf, sector 36864
sd 10:0:0:0: [sdf] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sd 10:0:0:0: [sdf] tag#0 Sense Key : 0x2 [current]
sd 10:0:0:0: [sdf] tag#0 ASC=0x3a ASCQ=0x0
sd 10:0:0:0: [sdf] tag#0 CDB: opcode=0x28 28 00 00 00 90 00 00 00 08 00
blk_update_request: I/O error, dev sdf, sector 36864
Buffer I/O error on dev sdf1, logical block 512, async page read
sdf: detected capacity change from 63864569856 to 0
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
VFS: Dirty inode writeback failed for block device sdf1 (err=-5).
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
VFS: Dirty inode writeback failed for block device sdf1 (err=-5).
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
VFS: Dirty inode writeback failed for block device sdf1 (err=-5).
sdf: detected capacity change from 63864569856 to 0
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
VFS: Dirty inode writeback failed for block device sdf1 (err=-5).
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
VFS: Dirty inode writeback failed for block device sdf1 (err=-5).
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
sdf: detected capacity change from 63864569856 to 0
usb 1-7: USB disconnect, device number 2
usb 1-7.3: USB disconnect, device number 8
usb 1-7.4: USB disconnect, device number 4
usb 1-7.4.1: USB disconnect, device number 5
usb 1-7.4.3: USB disconnect, device number 6
xhci_hcd 0000:00:14.0: Cannot set link state.
usb usb2-port6: cannot disable (err = -32)
usb 2-6: USB disconnect, device number 2
usb 2-6.3: USB disconnect, device number 8
usb 2-6.3.1: USB disconnect, device number 11
usb 1-7: new high-speed USB device number 9 using xhci_hcd
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 4 ports detected
usb 2-6: new SuperSpeed USB device number 12 using xhci_hcd
hub 2-6:1.0: USB hub found
hub 2-6:1.0: 4 ports detected
usb 1-7.4: new high-speed USB device number 10 using xhci_hcd
hub 1-7.4:1.0: USB hub found
hub 1-7.4:1.0: 3 ports detected
usb 2-6.3: new SuperSpeed USB device number 13 using xhci_hcd
hub 2-6.3:1.0: USB hub found
hub 2-6.3:1.0: 4 ports detected
usb 1-7.4.1: new full-speed USB device number 11 using xhci_hcd
input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.1/1-7.4.1:1.0/0003:0853:0100.0007/input/input20
hid-generic 0003:0853:0100.0007: input,hidraw1: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:14.0-7.4.1/input0
usb 1-7.3: new high-speed USB device number 12 using xhci_hcd
hub 1-7.3:1.0: USB hub found
hub 1-7.3:1.0: 4 ports detected
usb 1-7.4.3: new full-speed USB device number 13 using xhci_hcd
logitech-djreceiver 0003:046D:C52B.000A: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-7.4.3/input2
usb 2-6.3.1: new SuperSpeed USB device number 14 using xhci_hcd
usb-storage 2-6.3.1:1.0: USB Mass Storage device detected
scsi host10: usb-storage 2-6.3.1:1.0
input: Logitech MX Master as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.3/1-7.4.3:1.2/0003:046D:C52B.000A/0003:046D:4041.000B/input/input21
logitech-hidpp-device 0003:046D:4041.000B: input,hidraw3: USB HID v1.11 Keyboard [Logitech MX Master] on usb-0000:00:14.0-7.4.3:1
input: Logitech K270 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.3/1-7.4.3:1.2/0003:046D:C52B.000A/0003:046D:4003.000C/input/input22
logitech-hidpp-device 0003:046D:4003.000C: input,hidraw4: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:14.0-7.4.3:2
scsi 10:0:0:0: Direct-Access TS-RDF5 SD Transcend TS38 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sdf] Attached SCSI removable disk
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sd 10:0:0:0: [sdf] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
sd 10:0:0:0: [sdf] tag#0 Sense Key : 0xb [current]
sd 10:0:0:0: [sdf] tag#0 ASC=0x47 ASCQ=0x1
sd 10:0:0:0: [sdf] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
blk_update_request: I/O error, dev sdf, sector 0
Buffer I/O error on dev sdf, logical block 0, async page read
ldm_validate_partition_table(): Disk read failed.
sdf: unable to read partition table
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
VFS: Dirty inode writeback failed for block device sdf1 (err=-5).
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
sdf: detected capacity change from 63864569856 to 0
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
VFS: Dirty inode writeback failed for block device sdf1 (err=-5).
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
VFS: Dirty inode writeback failed for block device sdf1 (err=-5).
nautilus[2401]: segfault at 380 ip 00007f2fe50b6c74 sp 00007fffab3b75e0 error 4 in libgtk-3.so.0.2200.19[7f2fe4f1b000+70a000]
usb 1-7: USB disconnect, device number 9
usb 1-7.3: USB disconnect, device number 12
usb 1-7.4: USB disconnect, device number 10
usb 1-7.4.1: USB disconnect, device number 11
usb 1-7.4.3: USB disconnect, device number 13
xhci_hcd 0000:00:14.0: Cannot set link state.
usb usb2-port6: cannot disable (err = -32)
usb 2-6: USB disconnect, device number 12
usb 2-6.3: USB disconnect, device number 13
usb 2-6.3.1: USB disconnect, device number 14
usb 1-7: new high-speed USB device number 14 using xhci_hcd
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 4 ports detected
usb 2-6: new SuperSpeed USB device number 15 using xhci_hcd
hub 2-6:1.0: USB hub found
hub 2-6:1.0: 4 ports detected
usb 1-7.4: new high-speed USB device number 15 using xhci_hcd
hub 1-7.4:1.0: USB hub found
hub 1-7.4:1.0: 3 ports detected
usb 2-6.3: new SuperSpeed USB device number 16 using xhci_hcd
hub 2-6.3:1.0: USB hub found
hub 2-6.3:1.0: 4 ports detected
usb 1-7.4.1: new full-speed USB device number 16 using xhci_hcd
input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.1/1-7.4.1:1.0/0003:0853:0100.000D/input/input23
hid-generic 0003:0853:0100.000D: input,hidraw1: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:14.0-7.4.1/input0
usb 1-7.3: new high-speed USB device number 17 using xhci_hcd
hub 1-7.3:1.0: USB hub found
hub 1-7.3:1.0: 4 ports detected
usb 1-7.4.3: new full-speed USB device number 18 using xhci_hcd
logitech-djreceiver 0003:046D:C52B.0010: hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-7.4.3/input2
usb 2-6.3.1: new SuperSpeed USB device number 17 using xhci_hcd
usb-storage 2-6.3.1:1.0: USB Mass Storage device detected
scsi host10: usb-storage 2-6.3.1:1.0
input: Logitech MX Master as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.3/1-7.4.3:1.2/0003:046D:C52B.0010/0003:046D:4041.0011/input/input24
logitech-hidpp-device 0003:046D:4041.0011: input,hidraw5: USB HID v1.11 Keyboard [Logitech MX Master] on usb-0000:00:14.0-7.4.3:1
input: Logitech K270 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.3/1-7.4.3:1.2/0003:046D:C52B.0010/0003:046D:4003.0012/input/input25
logitech-hidpp-device 0003:046D:4003.0012: input,hidraw6: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:14.0-7.4.3:2
scsi 10:0:0:0: Direct-Access TS-RDF5 SD Transcend TS38 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sd 10:0:0:0: [sdf] Write Protect is off
sd 10:0:0:0: [sdf] Mode Sense: 23 00 00 00
sd 10:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1
sd 10:0:0:0: [sdf] Attached SCSI removable disk
logitech-hidpp-device 0003:046D:4041.0011: HID++ 4.5 device connected.
VFS: Dirty inode writeback failed for block device sdf1 (err=-5).
darktable[14465]: segfault at 0 ip (null) sp 00007f0f88062568 error 14 in darktable[561c8ca7f000+1000]
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
FAT-fs (sdf1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 2-6.3.1: USB disconnect, device number 17
sd 10:0:0:0: [sdf] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00
sd 10:0:0:0: [sdf] tag#0 CDB: opcode=0x28 28 00 00 4d 48 00 00 02 00 00
blk_update_request: I/O error, dev sdf, sector 5064704
sd 10:0:0:0: [sdf] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00
sd 10:0:0:0: [sdf] tag#0 CDB: opcode=0x28 28 00 00 4d 4a 00 00 02 00 00
blk_update_request: I/O error, dev sdf, sector 5065216
usb 2-6.3.1: new SuperSpeed USB device number 18 using xhci_hcd
usb-storage 2-6.3.1:1.0: USB Mass Storage device detected
scsi host10: usb-storage 2-6.3.1:1.0
scsi 10:0:0:0: Direct-Access TS-RDF5 SD Transcend TS38 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sd 10:0:0:0: [sdf] Write Protect is off
sd 10:0:0:0: [sdf] Mode Sense: 23 00 00 00
sd 10:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1
sd 10:0:0:0: [sdf] Attached SCSI removable disk
FAT-fs (sdf1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sd 10:0:0:0: [sdf] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
sdf: sdf1
FAT-fs (sdf1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
mmap: DedicatedWorker (8995): VmData 2147819520 exceed data ulimit 2147483647. Update limits or use boot option ignore_rlimit_data.
VFS: Dirty inode writeback failed for block device sdf1 (err=-5).
sd 10:0:0:0: [sdf] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
sdf: sdf1
FAT-fs (sdf1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
VFS: Dirty inode writeback failed for block device sdf1 (err=-5).
darktable[7360]: segfault at 0 ip (null) sp 00007fa14cf4d568 error 14 in darktable[5609bef90000+1000]
TCP: request_sock_TCP: Possible SYN flooding on port 64800. Sending cookies. Check SNMP counters.
TCP: request_sock_TCPv6: Possible SYN flooding on port 64800. Sending cookies. Check SNMP counters.
usb 1-7: USB disconnect, device number 14
usb 1-7.3: USB disconnect, device number 17
usb 1-7.4: USB disconnect, device number 15
usb 1-7.4.1: USB disconnect, device number 16
usb 1-7.4.3: USB disconnect, device number 18
xhci_hcd 0000:00:14.0: Cannot set link state.
usb usb2-port6: cannot disable (err = -32)
usb 2-6: USB disconnect, device number 15
usb 2-6.3: USB disconnect, device number 16
usb 2-6.3.1: USB disconnect, device number 18
usb 2-6.3.1: Failed to set U1 timeout to 0x0,error code -110
usb 2-6.3.1: usb_reset_and_verify_device Failed to disable LPM
.
usb 1-7: new high-speed USB device number 19 using xhci_hcd
hub 1-7:1.0: USB hub found
hub 1-7:1.0: 4 ports detected
usb 2-6: new SuperSpeed USB device number 19 using xhci_hcd
hub 2-6:1.0: USB hub found
hub 2-6:1.0: 4 ports detected
usb 1-7.4: new high-speed USB device number 20 using xhci_hcd
hub 1-7.4:1.0: USB hub found
hub 1-7.4:1.0: 3 ports detected
usb 2-6.3: new SuperSpeed USB device number 20 using xhci_hcd
hub 2-6.3:1.0: USB hub found
hub 2-6.3:1.0: 4 ports detected
usb 1-7.4.1: new full-speed USB device number 21 using xhci_hcd
input: Topre Corporation HHKB Professional as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.1/1-7.4.1:1.0/0003:0853:0100.0013/input/input26
hid-generic 0003:0853:0100.0013: input,hidraw1: USB HID v1.11 Keyboard [Topre Corporation HHKB Professional] on usb-0000:00:14.0-7.4.1/input0
usb 1-7.3: new high-speed USB device number 22 using xhci_hcd
hub 1-7.3:1.0: USB hub found
hub 1-7.3:1.0: 4 ports detected
usb 1-7.4.3: new full-speed USB device number 23 using xhci_hcd
logitech-djreceiver 0003:046D:C52B.0016: hiddev0,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-7.4.3/input2
usb 2-6.3.1: new SuperSpeed USB device number 21 using xhci_hcd
usb-storage 2-6.3.1:1.0: USB Mass Storage device detected
scsi host10: usb-storage 2-6.3.1:1.0
input: Logitech MX Master as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.3/1-7.4.3:1.2/0003:046D:C52B.0016/0003:046D:4041.0017/input/input27
logitech-hidpp-device 0003:046D:4041.0017: input,hidraw6: USB HID v1.11 Keyboard [Logitech MX Master] on usb-0000:00:14.0-7.4.3:1
input: Logitech K270 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7.4/1-7.4.3/1-7.4.3:1.2/0003:046D:C52B.0016/0003:046D:4003.0018/input/input28
logitech-hidpp-device 0003:046D:4003.0018: input,hidraw7: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:14.0-7.4.3:2
scsi 10:0:0:0: Direct-Access TS-RDF5 SD Transcend TS38 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: [sdf] Attached SCSI removable disk
snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
sd 10:0:0:0: [sdf] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
sdf: sdf1
FAT-fs (sdf1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
VFS: Dirty inode writeback failed for block device sdf1 (err=-5).