dmesg - 33
Linux version 4.12.0-12-generic (buildd@lcy01-21) (gcc version 7.1.0 (Ubuntu 7.1.0-13ubuntu1) ) #13-Ubuntu SMP Thu Aug 17 16:13:25 UTC 2017 (Ubuntu 4.12.0-12.13-generic 4.12.8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable
BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x00000000dccfffff] usable
BIOS-e820: [mem 0x00000000dcd00000-0x00000000dce40fff] reserved
BIOS-e820: [mem 0x00000000dce41000-0x00000000dcf36fff] usable
BIOS-e820: [mem 0x00000000dcf37000-0x00000000dd30efff] ACPI NVS
BIOS-e820: [mem 0x00000000dd30f000-0x00000000de328fff] reserved
BIOS-e820: [mem 0x00000000de329000-0x00000000de3e6fff] type 20
BIOS-e820: [mem 0x00000000de3e7000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fdf00000-0x00000000fdffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0xdcf37000 ACPI=0xdcf37000 SMBIOS=0xde298000 ESRT=0xdadaec98 MEMATTR=0xdaae1018
SMBIOS 3.0 present.
DMI: MSI MS-7A33/X370 SLI PLUS (MS-7A33), BIOS 3.50 07/31/2017
tsc: Fast TSC calibration failed
tsc: Using PIT calibration value
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000DF000000 mask FFFFFF000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
total RAM covered: 3568M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 3 lose cover RAM: 0G
e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000dadaec98 to 0x00000000dadaecd0.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff89fbc0096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x300d24000, 0x300d24fff] PGTABLE
BRK [0x300d25000, 0x300d25fff] PGTABLE
BRK [0x300d26000, 0x300d26fff] PGTABLE
BRK [0x300d27000, 0x300d27fff] PGTABLE
BRK [0x300d28000, 0x300d28fff] PGTABLE
BRK [0x300d29000, 0x300d29fff] PGTABLE
BRK [0x300d2a000, 0x300d2afff] PGTABLE
BRK [0x300d2b000, 0x300d2bfff] PGTABLE
BRK [0x300d2c000, 0x300d2cfff] PGTABLE
BRK [0x300d2d000, 0x300d2dfff] PGTABLE
BRK [0x300d2e000, 0x300d2efff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x316fd000-0x34b75fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DCF37000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DCF37098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DCF3D1B0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170303/tbfadt-658)
ACPI: DSDT 0x00000000DCF371D8 005FD4 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DD2F8E00 000040
ACPI: APIC 0x00000000DCF3D2C8 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DCF3D3A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DCF3D3F0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DCF3D490 008C4C (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DCF460E0 0020E4 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000DCF481C8 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DCF49118 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DCF49148 0017D2 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DCF4A920 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000DCF4A960 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DCF4A998 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DCF4A9C0 000042 (v01 00000000 00000000)
ACPI: IVRS 0x00000000DCF4AA08 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: BGRT 0x00000000DCF4AAD8 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DCF4AB10 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: SSDT 0x00000000DCF4AC08 001664 (v01 AMD CPMCMN 00000001 INTL 20120913)
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
Setting APIC routing to physical flat.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
NODE_DATA(0) allocated [mem 0x41f355000-0x41f37ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009d7ffff]
node 0: [mem 0x000000000a000000-0x00000000dccfffff]
node 0: [mem 0x00000000dce41000-0x00000000dcf36fff]
node 0: [mem 0x00000000de3e7000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000041f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
On node 0 totalpages: 4180654
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 14111 pages used for memmap
DMA32 zone: 903055 pages, LIFO batch:31
Normal zone: 51150 pages used for memmap
Normal zone: 3273600 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
PM: Registered nosave memory: [mem 0xdcd00000-0xdce40fff]
PM: Registered nosave memory: [mem 0xdcf37000-0xdd30efff]
PM: Registered nosave memory: [mem 0xdd30f000-0xde328fff]
PM: Registered nosave memory: [mem 0xde329000-0xde3e6fff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfdefffff]
PM: Registered nosave memory: [mem 0xfdf00000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 39 pages/cpu @ffff89ffce600000 s119384 r8192 d32168 u262144
pcpu-alloc: s119384 r8192 d32168 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4115302
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16271676K/16722616K available (9166K kernel code, 2537K rwdata, 3920K rodata, 2264K init, 2392K bss, 450940K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 37223 entries in 146 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS:524544 nr_irqs:1096 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 2999.818 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.63 BogoMIPS (lpj=11999272)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
ACPI: 7 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Freeing SMP alternatives memory: 32K
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Ryzen 7 1700 Eight-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (95994.17 BogoMIPS)
sched_clock: Marking stable (96000000, 0)->(510609287, -414609287)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdcf37000-0xdd30efff] (4030464 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 8:10:14, date: 09/08/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:01.3: System wakeup disabled by ACPI
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: System wakeup disabled by ACPI
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:03:00.0: [1022:43b9] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfd7a0000-0xfd7a7fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:03:00.1: [1022:43b5] type 00 class 0x010601
pci 0000:03:00.1: reg 0x24: [mem 0xfd780000-0xfd79ffff]
pci 0000:03:00.1: reg 0x30: [mem 0xfd700000-0xfd77ffff pref]
pci 0000:03:00.1: PME# supported from D3hot D3cold
pci 0000:03:00.2: [1022:43b0] type 01 class 0x060400
pci 0000:03:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 03-22]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xfd500000-0xfd7fffff]
pci 0000:04:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:01.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:01.0: PME# supported from D3hot D3cold
pci 0000:04:01.0: System wakeup disabled by ACPI
pci 0000:04:02.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:02.0: PME# supported from D3hot D3cold
pci 0000:04:03.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:03.0: PME# supported from D3hot D3cold
pci 0000:04:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:04.0: PME# supported from D3hot D3cold
pci 0000:04:08.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:08.0: PME# supported from D3hot D3cold
pci 0000:03:00.2: PCI bridge to [bus 04-22]
pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
pci 0000:03:00.2: bridge window [mem 0xfd500000-0xfd6fffff]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:1e:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:1e:00.0: reg 0x10: [io 0xf000-0xf0ff]
pci 0000:1e:00.0: reg 0x18: [mem 0xfd604000-0xfd604fff 64bit]
pci 0000:1e:00.0: reg 0x20: [mem 0xfd600000-0xfd603fff 64bit]
pci 0000:1e:00.0: supports D1 D2
pci 0000:1e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:01.0: PCI bridge to [bus 1e]
pci 0000:04:01.0: bridge window [io 0xf000-0xffff]
pci 0000:04:01.0: bridge window [mem 0xfd600000-0xfd6fffff]
pci 0000:04:02.0: PCI bridge to [bus 1f]
pci 0000:04:03.0: PCI bridge to [bus 20]
pci 0000:04:04.0: PCI bridge to [bus 21]
pci 0000:22:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:22:00.0: reg 0x10: [mem 0xfd500000-0xfd507fff 64bit]
pci 0000:22:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:08.0: PCI bridge to [bus 22]
pci 0000:04:08.0: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:23:00.0: [10de:1c03] type 00 class 0x030000
pci 0000:23:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
pci 0000:23:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:23:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:23:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:23:00.0: reg 0x30: [mem 0xfd000000-0xfd07ffff pref]
pci 0000:23:00.1: [10de:10f1] type 00 class 0x040300
pci 0000:23:00.1: reg 0x10: [mem 0xfd080000-0xfd083fff]
pci 0000:00:03.1: PCI bridge to [bus 23]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfc000000-0xfd0fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:24:00.0: [1022:145a] type 00 class 0x130000
pci 0000:24:00.2: [1022:1456] type 00 class 0x108000
pci 0000:24:00.2: reg 0x18: [mem 0xfd300000-0xfd3fffff]
pci 0000:24:00.2: reg 0x24: [mem 0xfd400000-0xfd401fff]
pci 0000:24:00.3: [1022:145c] type 00 class 0x0c0330
pci 0000:24:00.3: reg 0x10: [mem 0xfd200000-0xfd2fffff 64bit]
pci 0000:24:00.3: PME# supported from D0 D3hot D3cold
pci 0000:24:00.3: System wakeup disabled by ACPI
pci 0000:00:07.1: PCI bridge to [bus 24]
pci 0000:00:07.1: bridge window [mem 0xfd200000-0xfd4fffff]
pci 0000:25:00.0: [1022:1455] type 00 class 0x130000
pci 0000:25:00.2: [1022:7901] type 00 class 0x010601
pci 0000:25:00.2: reg 0x24: [mem 0xfd808000-0xfd808fff]
pci 0000:25:00.2: PME# supported from D3hot D3cold
pci 0000:25:00.3: [1022:1457] type 00 class 0x040300
pci 0000:25:00.3: reg 0x10: [mem 0xfd800000-0xfd807fff]
pci 0000:25:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 25]
pci 0000:00:08.1: bridge window [mem 0xfd800000-0xfd8fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:23:00.0: vgaarb: setting as boot VGA device
pci 0000:23:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:23:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
e820: reserve RAM buffer [mem 0xdcd00000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdcf37000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0a00-0x0a0f] has been reserved
system 00:03: [io 0x0a10-0x0a1f] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: [io 0x0a40-0x0a4f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x040b] has been reserved
system 00:06: [io 0x04d6] has been reserved
system 00:06: [io 0x0c00-0x0c01] has been reserved
system 00:06: [io 0x0c14] has been reserved
system 00:06: [io 0x0c50-0x0c51] has been reserved
system 00:06: [io 0x0c52] has been reserved
system 00:06: [io 0x0c6c] has been reserved
system 00:06: [io 0x0c6f] has been reserved
system 00:06: [io 0x0cd0-0x0cd1] has been reserved
system 00:06: [io 0x0cd2-0x0cd3] has been reserved
system 00:06: [io 0x0cd4-0x0cd5] has been reserved
system 00:06: [io 0x0cd6-0x0cd7] has been reserved
system 00:06: [io 0x0cd8-0x0cdf] has been reserved
system 00:06: [io 0x0800-0x089f] has been reserved
system 00:06: [io 0x0b00-0x0b0f] has been reserved
system 00:06: [io 0x0b20-0x0b3f] has been reserved
system 00:06: [io 0x0900-0x090f] has been reserved
system 00:06: [io 0x0910-0x091f] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:01.0: PCI bridge to [bus 1e]
pci 0000:04:01.0: bridge window [io 0xf000-0xffff]
pci 0000:04:01.0: bridge window [mem 0xfd600000-0xfd6fffff]
pci 0000:04:02.0: PCI bridge to [bus 1f]
pci 0000:04:03.0: PCI bridge to [bus 20]
pci 0000:04:04.0: PCI bridge to [bus 21]
pci 0000:04:08.0: PCI bridge to [bus 22]
pci 0000:04:08.0: bridge window [mem 0xfd500000-0xfd5fffff]
pci 0000:03:00.2: PCI bridge to [bus 04-22]
pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
pci 0000:03:00.2: bridge window [mem 0xfd500000-0xfd6fffff]
pci 0000:00:01.3: PCI bridge to [bus 03-22]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xfd500000-0xfd7fffff]
pci 0000:00:03.1: PCI bridge to [bus 23]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfc000000-0xfd0fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 24]
pci 0000:00:07.1: bridge window [mem 0xfd200000-0xfd4fffff]
pci 0000:00:08.1: PCI bridge to [bus 25]
pci 0000:00:08.1: bridge window [mem 0xfd800000-0xfd8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xfd500000-0xfd7fffff]
pci_bus 0000:04: resource 0 [io 0xf000-0xffff]
pci_bus 0000:04: resource 1 [mem 0xfd500000-0xfd6fffff]
pci_bus 0000:1e: resource 0 [io 0xf000-0xffff]
pci_bus 0000:1e: resource 1 [mem 0xfd600000-0xfd6fffff]
pci_bus 0000:22: resource 1 [mem 0xfd500000-0xfd5fffff]
pci_bus 0000:23: resource 0 [io 0xe000-0xefff]
pci_bus 0000:23: resource 1 [mem 0xfc000000-0xfd0fffff]
pci_bus 0000:23: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:24: resource 1 [mem 0xfd200000-0xfd4fffff]
pci_bus 0000:25: resource 1 [mem 0xfd800000-0xfd8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:23:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 53732K
AMD-Vi: IOMMU performance counters supported
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.3 to group 1
iommu: Adding device 0000:00:02.0 to group 2
iommu: Adding device 0000:00:03.0 to group 3
iommu: Adding device 0000:00:03.1 to group 4
iommu: Adding device 0000:00:04.0 to group 5
iommu: Adding device 0000:00:07.0 to group 6
iommu: Adding device 0000:00:07.1 to group 6
iommu: Adding device 0000:00:08.0 to group 7
iommu: Adding device 0000:00:08.1 to group 7
iommu: Adding device 0000:00:14.0 to group 8
iommu: Adding device 0000:00:14.3 to group 8
iommu: Adding device 0000:00:18.0 to group 9
iommu: Adding device 0000:00:18.1 to group 9
iommu: Adding device 0000:00:18.2 to group 9
iommu: Adding device 0000:00:18.3 to group 9
iommu: Adding device 0000:00:18.4 to group 9
iommu: Adding device 0000:00:18.5 to group 9
iommu: Adding device 0000:00:18.6 to group 9
iommu: Adding device 0000:00:18.7 to group 9
iommu: Adding device 0000:03:00.0 to group 10
iommu: Adding device 0000:03:00.1 to group 10
iommu: Adding device 0000:03:00.2 to group 10
iommu: Adding device 0000:04:00.0 to group 10
iommu: Adding device 0000:04:01.0 to group 10
iommu: Adding device 0000:04:02.0 to group 10
iommu: Adding device 0000:04:03.0 to group 10
iommu: Adding device 0000:04:04.0 to group 10
iommu: Adding device 0000:04:08.0 to group 10
iommu: Adding device 0000:1e:00.0 to group 10
iommu: Adding device 0000:22:00.0 to group 10
iommu: Adding device 0000:23:00.0 to group 11
iommu: Adding device 0000:23:00.1 to group 11
iommu: Adding device 0000:24:00.0 to group 6
iommu: Adding device 0000:24:00.2 to group 6
iommu: Adding device 0000:24:00.3 to group 6
iommu: Adding device 0000:25:00.0 to group 7
iommu: Adding device 0000:25:00.2 to group 7
iommu: Adding device 0000:25:00.3 to group 7
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0xf77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1504858214.779:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.3: AER enabled with IRQ 284
pcieport 0000:00:03.1: AER enabled with IRQ 285
pcieport 0000:00:01.3: Signaling PME with IRQ 284
pcieport 0000:00:03.1: Signaling PME with IRQ 285
pcieport 0000:00:07.1: Signaling PME with IRQ 286
pcieport 0000:00:08.1: Signaling PME with IRQ 288
efifb: probing for efifb
efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x08000418
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.12.0-12-generic xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.12.0-12-generic xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:22:00.0: xHCI Host Controller
xhci_hcd 0000:22:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:22:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.12.0-12-generic xhci-hcd
usb usb3: SerialNumber: 0000:22:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:22:00.0: xHCI Host Controller
xhci_hcd 0000:22:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.12.0-12-generic xhci-hcd
usb usb4: SerialNumber: 0000:22:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:24:00.3: xHCI Host Controller
xhci_hcd 0000:24:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:24:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000418
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.12.0-12-generic xhci-hcd
usb usb5: SerialNumber: 0000:24:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:24:00.3: xHCI Host Controller
xhci_hcd 0000:24:00.3: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.12.0-12-generic xhci-hcd
usb usb6: SerialNumber: 0000:24:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08001126
microcode: CPU1: patch_level=0x08001126
microcode: CPU2: patch_level=0x08001126
microcode: CPU3: patch_level=0x08001126
microcode: CPU4: patch_level=0x08001126
microcode: CPU5: patch_level=0x08001126
microcode: CPU6: patch_level=0x08001126
microcode: CPU7: patch_level=0x08001126
microcode: CPU8: patch_level=0x08001126
microcode: CPU9: patch_level=0x08001126
microcode: CPU10: patch_level=0x08001126
microcode: CPU11: patch_level=0x08001126
microcode: CPU12: patch_level=0x08001126
microcode: CPU13: patch_level=0x08001126
microcode: CPU14: patch_level=0x08001126
microcode: CPU15: patch_level=0x08001126
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 9fc4f2692e98c3b909ff78e7f0fe11f213909aae'
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI db list
Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI dbx list
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 1:83:169
acpi device:32: hash matches
rtc_cmos 00:02: setting system clock to 2017-09-08 08:10:15 UTC (1504858215)
acpi_cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2264K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1060K
Freeing unused kernel memory: 176K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
ahci 0000:03:00.1: version 3.0
ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780100 irq 302
ata2: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780180 irq 302
ata3: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780200 irq 302
ata4: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780280 irq 302
ata5: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780300 irq 302
ata6: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780380 irq 302
ata7: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780400 irq 302
ata8: SATA max UDMA/133 abar m131072@0xfd780000 port 0xfd780480 irq 302
ahci 0000:25:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:25:00.2: flags: 64bit ncq sntf ilck led clo only pmp fbs pio
scsi host8: ahci
ata9: SATA max UDMA/133 abar m4096@0xfd808000 port 0xfd808100 irq 304
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
r8169 0000:1e:00.0 eth0: RTL8168h/8111h at 0xffffb65c018ed000, 4c:cc:6a:ff:6f:d0, XID 14100800 IRQ 305
r8169 0000:1e:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
nvidia 0000:23:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 245
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.82 Wed Jul 19 21:16:49 PDT 2017 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.82 Wed Jul 19 20:35:11 PDT 2017
[drm] [nvidia-drm] [GPU ID 0x00002300] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:23:00.0 on minor 0
r8169 0000:1e:00.0 enp30s0: renamed from eth0
usb 6-4: new SuperSpeed USB device number 2 using xhci_hcd
usb 1-12: new low-speed USB device number 2 using xhci_hcd
ata9: SATA link down (SStatus 0 SControl 300)
usb 6-4: New USB device found, idVendor=2109, idProduct=0812
usb 6-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-4: Product: USB3.0 Hub
usb 6-4: Manufacturer: VIA Labs, Inc.
hub 6-4:1.0: USB hub found
hub 6-4:1.0: 4 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-10: ADATA SU800, P0801A, max UDMA/133
ata1.00: 1000215216 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ADATA SU800 1A PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-12: New USB device found, idVendor=046d, idProduct=c219
usb 1-12: New USB device strings: Mfr=3, Product=1, SerialNumber=0
usb 1-12: Product: Logitech Cordless RumblePad 2
usb 1-12: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usb 5-1: new low-speed USB device number 2 using xhci_hcd
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.0/0003:046D:C219.0001/input/input2
logitech 0003:046D:C219.0001: input,hidraw0: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:03:00.0-12/input0
hid_logitech: Force feedback for Logitech force feedback devices by Johann Deneux
tsc: Refined TSC clocksource calibration: 2999.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e44b2357, max_idle_ns: 440795324996 ns
usb 1-13: new full-speed USB device number 3 using xhci_hcd
usb 5-1: New USB device found, idVendor=046d, idProduct=c31c
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB Keyboard
usb 5-1: Manufacturer: Logitech
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:24:00.3/usb5/5-1/5-1:1.0/0003:046D:C31C.0002/input/input3
usb 6-4.1: new SuperSpeed USB device number 3 using xhci_hcd
random: fast init done
usb 6-4.1: New USB device found, idVendor=05e3, idProduct=0743
usb 6-4.1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 6-4.1: Product: USB Storage
usb 6-4.1: Manufacturer: Generic
usb 6-4.1: SerialNumber: 000000000817
usb-storage 6-4.1:1.0: USB Mass Storage device detected
scsi host9: usb-storage 6-4.1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:24:00.3-1/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:24:00.3/usb5/5-1/5-1:1.1/0003:046D:C31C.0003/input/input4
hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:24:00.3-1/input1
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 5-2: new low-speed USB device number 3 using xhci_hcd
ata2.00: ATA-8: KINGSTON SV300S37A120G, 525ABBF0, max UDMA/133
ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-13: New USB device found, idVendor=046d, idProduct=c52b
usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-13: Product: USB Receiver
usb 1-13: Manufacturer: Logitech
usb 5-2: New USB device found, idVendor=275d, idProduct=0ba6
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: USB OPTICAL MOUSE
logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.0-13/input2
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:07.1/0000:24:00.3/usb5/5-2/5-2:1.0/0003:275D:0BA6.0007/input/input5
hid-generic 0003:275D:0BA6.0007: input,hidraw4: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:24:00.3-2/input0
input: Logitech M310 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.2/0003:046D:C52B.0006/0003:046D:1024.0008/input/input6
logitech-hidpp-device 0003:046D:1024.0008: input,hidraw5: USB HID v1.11 Mouse [Logitech M310] on usb-0000:03:00.0-13:1
input: Logitech K520 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.2/0003:046D:C52B.0006/0003:046D:2011.0009/input/input7
logitech-hidpp-device 0003:046D:2011.0009: input,hidraw6: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:03:00.0-13:2
input: Logitech M310 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.2/0003:046D:C52B.0006/0003:046D:1024.000A/input/input8
logitech-hidpp-device 0003:046D:1024.000A: input,hidraw7: USB HID v1.11 Mouse [Logitech M310] on usb-0000:03:00.0-13:3
input: Logitech K520 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.2/0003:046D:C52B.0006/0003:046D:2011.000B/input/input9
logitech-hidpp-device 0003:046D:2011.000B: input,hidraw8: USB HID v1.11 Keyboard [Logitech K520] on usb-0000:03:00.0-13:4
ata3: SATA link down (SStatus 0 SControl 300)
usb 5-4: new high-speed USB device number 4 using xhci_hcd
usb 5-4: New USB device found, idVendor=2109, idProduct=2812
usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4: Product: USB2.0 Hub
usb 5-4: Manufacturer: VIA Labs, Inc.
hub 5-4:1.0: USB hub found
hub 5-4:1.0: 4 ports detected
clocksource: Switched to clocksource tsc
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS70 EX00 PQ: 0 ANSI: 5
scsi 9:0:0:0: Direct-Access Generic STORAGE DEVICE 0817 PQ: 0 ANSI: 6
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdc] Attached SCSI removable disk
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg3 type 5
ata5: SATA link down (SStatus 0 SControl 330)
ata6: SATA link down (SStatus 0 SControl 330)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting Huge Pages File System...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd-journald[373]: Received request to flush runtime journal from PID 1
Adding 2097148k swap on /swapfile. Priority:-1 extents:6 across:2260988k SSFS
lp0: using parport0 (interrupt-driven).
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 243
ccp 0000:24:00.2: enabling device (0000 -> 0002)
ccp 0000:24:00.2: enabled
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:23:00.1: Disabling MSI
snd_hda_intel 0000:23:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:25:00.3: enabling device (0000 -> 0002)
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input10
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input11
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input12
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input13
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input14
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input15
input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input16
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input17
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
random: crng init done
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
audit: type=1400 audit(1504858220.204:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=917 comm="apparmor_parser"
audit: type=1400 audit(1504858220.204:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=915 comm="apparmor_parser"
audit: type=1400 audit(1504858220.205:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=914 comm="apparmor_parser"
audit: type=1400 audit(1504858220.205:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=921 comm="apparmor_parser"
audit: type=1400 audit(1504858220.205:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=918 comm="apparmor_parser"
audit: type=1400 audit(1504858220.205:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=918 comm="apparmor_parser"
audit: type=1400 audit(1504858220.206:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=923 comm="apparmor_parser"
audit: type=1400 audit(1504858220.207:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=919 comm="apparmor_parser"
audit: type=1400 audit(1504858220.208:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=911 comm="apparmor_parser"
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:23:00.1/sound/card0/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:23:00.1/sound/card0/input19
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:23:00.1/sound/card0/input20
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:23:00.1/sound/card0/input21
IPv6: ADDRCONF(NETDEV_UP): enp30s0: link is not ready
r8169 0000:1e:00.0 enp30s0: link down
r8169 0000:1e:00.0 enp30s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp30s0: link is not ready
nvidia-modeset: Allocated GPU:0 (GPU-8e1345f1-ce6b-26b0-0c8f-a93a6a9e8540) @ PCI:0000:23:00.0
r8169 0000:1e:00.0 enp30s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp30s0: link becomes ready
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 10
rfkill: input handler disabled