dmesg - ap2

Return To ap2 System Information

Linux version 4.12.4-1-ARCH (builduser@nspawn-9860) (gcc version 7.1.1 20170630 (GCC) ) #1 SMP PREEMPT Fri Jul 28 18:54:18 UTC 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable
BIOS-e820: [mem 0x000000000008c000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000631dbfff] usable
BIOS-e820: [mem 0x00000000631dc000-0x00000000633ddfff] reserved
BIOS-e820: [mem 0x00000000633de000-0x00000000db342fff] usable
BIOS-e820: [mem 0x00000000db343000-0x00000000dce23fff] reserved
BIOS-e820: [mem 0x00000000dce24000-0x00000000dcf7efff] ACPI NVS
BIOS-e820: [mem 0x00000000dcf7f000-0x00000000dcffefff] ACPI data
BIOS-e820: [mem 0x00000000dcfff000-0x00000000dcffffff] usable
BIOS-e820: [mem 0x00000000dd000000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xcb3c9018-0xcb3d4057] usable ==> usable
e820: update [mem 0xcb3b8018-0xcb3c8057] usable ==> usable
e820: update [mem 0xcb3ad018-0xcb3b7857] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000008bfff] usable
reserve setup_data: [mem 0x000000000008c000-0x00000000000bffff] reserved
reserve setup_data: [mem 0x00000000000e0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000631dbfff] usable
reserve setup_data: [mem 0x00000000631dc000-0x00000000633ddfff] reserved
reserve setup_data: [mem 0x00000000633de000-0x00000000cb3ad017] usable
reserve setup_data: [mem 0x00000000cb3ad018-0x00000000cb3b7857] usable
reserve setup_data: [mem 0x00000000cb3b7858-0x00000000cb3b8017] usable
reserve setup_data: [mem 0x00000000cb3b8018-0x00000000cb3c8057] usable
reserve setup_data: [mem 0x00000000cb3c8058-0x00000000cb3c9017] usable
reserve setup_data: [mem 0x00000000cb3c9018-0x00000000cb3d4057] usable
reserve setup_data: [mem 0x00000000cb3d4058-0x00000000db342fff] usable
reserve setup_data: [mem 0x00000000db343000-0x00000000dce23fff] reserved
reserve setup_data: [mem 0x00000000dce24000-0x00000000dcf7efff] ACPI NVS
reserve setup_data: [mem 0x00000000dcf7f000-0x00000000dcffefff] ACPI data
reserve setup_data: [mem 0x00000000dcfff000-0x00000000dcffffff] usable
reserve setup_data: [mem 0x00000000dd000000-0x00000000df9fffff] reserved
reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000021f5fffff] usable
efi: EFI v2.31 by Lenovo
efi:  ACPI=0xdcffe000  ACPI 2.0=0xdcffe014  SMBIOS=0xdce23000 
efi: [Firmware Bug]: Invalid EFI memory map entries:
efi: mem49: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
efi: mem50: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
efi: mem51: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
efi: mem52: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
efi: mem53: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
efi: mem54: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
efi: mem55: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
efi: Removing 7 invalid memory map entries.
SMBIOS 2.7 present.
DMI: LENOVO 20CD0038GE/20CD0038GE, BIOS GQET27WW (1.07 ) 10/17/2013
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 00E0000000 mask 7FE0000000 uncachable
  1 base 00DE000000 mask 7FFE000000 uncachable
  2 base 00DD000000 mask 7FFF000000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: last_pfn = 0xdd000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8aea40063000] 63000 size 24576
Using GB pages for direct mapping
BRK [0x187d5f000, 0x187d5ffff] PGTABLE
BRK [0x187d60000, 0x187d60fff] PGTABLE
BRK [0x187d61000, 0x187d61fff] PGTABLE
BRK [0x187d62000, 0x187d62fff] PGTABLE
BRK [0x187d63000, 0x187d63fff] PGTABLE
BRK [0x187d64000, 0x187d64fff] PGTABLE
BRK [0x187d65000, 0x187d65fff] PGTABLE
BRK [0x187d66000, 0x187d66fff] PGTABLE
BRK [0x187d67000, 0x187d67fff] PGTABLE
BRK [0x187d68000, 0x187d68fff] PGTABLE
BRK [0x187d69000, 0x187d69fff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x7f99e000-0x7fffefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DCFFE014 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000DCFFE170 0000B4 (v01 LENOVO TP-GQ    00001070 PTEC 00000002)
ACPI: FACP 0x00000000DCFFA000 00010C (v05 LENOVO TP-GQ    00001070 PTEC 00000002)
ACPI: DSDT 0x00000000DCFE9000 00CAF1 (v02 LENOVO TP-GQ    00001070 INTL 20120711)
ACPI: FACS 0x00000000DCF49000 000040
ACPI: SLIC 0x00000000DCFFD000 000176 (v01 LENOVO TP-GQ    00001070 PTEC 00000001)
ACPI: ASF! 0x00000000DCFFC000 0000A5 (v32 LENOVO TP-GQ    00001070 PTEC 00000002)
ACPI: HPET 0x00000000DCFF9000 000038 (v01 LENOVO TP-GQ    00001070 PTEC 00000002)
ACPI: LPIT 0x00000000DCFF8000 00005C (v01 LENOVO TP-GQ    00001070 PTEC 00000002)
ACPI: APIC 0x00000000DCFF7000 000098 (v01 LENOVO TP-GQ    00001070 PTEC 00000002)
ACPI: MCFG 0x00000000DCFF6000 00003C (v01 LENOVO TP-GQ    00001070 PTEC 00000002)
ACPI: SSDT 0x00000000DCFE8000 000539 (v01 LENOVO Cpu0Ist  00003000 INTL 20120711)
ACPI: SSDT 0x00000000DCFE7000 000AD8 (v01 LENOVO CpuPm    00003000 INTL 20120711)
ACPI: SSDT 0x00000000DCFE3000 00351B (v01 LENOVO SaSsdt   00003000 INTL 20120711)
ACPI: TCPA 0x00000000DCFE2000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
ACPI: SSDT 0x00000000DCFE1000 000571 (v01 Intel_ TpmTable 00001000 INTL 20120711)
ACPI: UEFI 0x00000000DCFE0000 000042 (v01 LENOVO TP-GQ    00001070 PTEC 00000002)
ACPI: MSDM 0x00000000DCEB3000 000055 (v03 LENOVO TP-GQ    00001070 PTEC 00000002)
ACPI: BATB 0x00000000DCFDF000 000046 (v01 LENOVO TP-GQ    00001070 PTEC 00000002)
ACPI: FPDT 0x00000000DCFDE000 000064 (v01 LENOVO TP-GQ    00001070 PTEC 00000002)
ACPI: UEFI 0x00000000DCFDD000 0002E2 (v01 LENOVO TP-GQ    00001070 PTEC 00000002)
ACPI: SSDT 0x00000000DCFDC000 000A3A (v01 LENOVO IsctTabl 00001000 INTL 20120711)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
NODE_DATA(0) allocated [mem 0x21f5fb000-0x21f5fffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000021f5fffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x0000000000057fff]
  node   0: [mem 0x0000000000059000-0x000000000008bfff]
  node   0: [mem 0x0000000000100000-0x00000000631dbfff]
  node   0: [mem 0x00000000633de000-0x00000000db342fff]
  node   0: [mem 0x00000000dcfff000-0x00000000dcffffff]
  node   0: [mem 0x0000000100000000-0x000000021f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021f5fffff]
On node 0 totalpages: 2074316
  DMA zone: 64 pages used for memmap
  DMA zone: 72 pages reserved
  DMA zone: 3978 pages, LIFO batch:0
  DMA32 zone: 13958 pages used for memmap
  DMA32 zone: 893250 pages, LIFO batch:31
  Normal zone: 18392 pages used for memmap
  Normal zone: 1177088 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000dda00000-0x00000000df9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0008c000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x631dc000-0x633ddfff]
PM: Registered nosave memory: [mem 0xcb3ad000-0xcb3adfff]
PM: Registered nosave memory: [mem 0xcb3b7000-0xcb3b7fff]
PM: Registered nosave memory: [mem 0xcb3b8000-0xcb3b8fff]
PM: Registered nosave memory: [mem 0xcb3c8000-0xcb3c8fff]
PM: Registered nosave memory: [mem 0xcb3c9000-0xcb3c9fff]
PM: Registered nosave memory: [mem 0xcb3d4000-0xcb3d4fff]
PM: Registered nosave memory: [mem 0xdb343000-0xdce23fff]
PM: Registered nosave memory: [mem 0xdce24000-0xdcf7efff]
PM: Registered nosave memory: [mem 0xdcf7f000-0xdcffefff]
PM: Registered nosave memory: [mem 0xdd000000-0xdf9fffff]
PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff]
PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
PM: Registered nosave memory: [mem 0xf80f9000-0xfe100fff]
PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
PM: Registered nosave memory: [mem 0xfe113000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
e820: [mem 0xdfa00000-0xf80f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff8aec5f200000 s106328 r8192 d28840 u262144
pcpu-alloc: s106328 r8192 d28840 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2041830
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7882544K/8297264K available (6539K kernel code, 1124K rwdata, 2048K rodata, 1324K init, 912K bss, 414720K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 27931 entries in 110 pages
Preemptible hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:760 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.443 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.42 BogoMIPS (lpj=7981476)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 24K
smpboot: Max logical packages: 4
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (family: 0x6, model: 0x45, stepping: 0x1)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19170.84 BogoMIPS)
sched_clock: Marking stable (449999955, 0)->(489443882, -39443927)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdce24000-0xdcf7efff] (1421312 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 10:09:01, date: 09/05/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8AEC555E5800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8AEC55417800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8AEC555D9C00 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf0619000-0xf061901f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf0614000-0xf0617fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf061d000-0xf061d3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf061c000-0xf061c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf0618000-0xf06180ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:04:00.0: [8086:08b2] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xf0500000-0xf0501fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:05:00.0: [10ec:5227] type 00 class 0xff0000
pci 0000:05:00.0: reg 0x10: [mem 0xf0400000-0xf0400fff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
e820: reserve RAM buffer [mem 0x631dc000-0x63ffffff]
e820: reserve RAM buffer [mem 0xcb3ad018-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb3b8018-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb3c9018-0xcbffffff]
e820: reserve RAM buffer [mem 0xdb343000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io  0x0680-0x069f] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0xffff] has been reserved
system 00:00: [io  0x1800-0x18fe] has been reserved
system 00:00: [io  0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN0042 PNP0f13 (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xf8000000-0xfbffffff] could not be reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:05: [mem 0xdfa10000-0xdfa1ffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2:   bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:04: resource 1 [mem 0xf0500000-0xf05fffff]
pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:14.0: can't derive routing for PCI INT A
pci 0000:00:14.0: PCI INT A: not connected
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 6532K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc73ad000-0xcb3ad000] (64MB) mapped at [ffff8aeb073ad000-ffff8aeb0b3acfff]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=40 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 1200k, total 1200k
efifb: mode is 640x480x32, linelength=2560, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x40651, pf=0x40, revision=0x15
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
  Magic number: 1:70:173
acpi device:36: hash matches
rtc_cmos 00:01: setting system clock to 2017-09-05 10:09:02 UTC (1504606142)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1324K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1640K
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 3.00 loaded.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf061d000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xf061c000 port 0xf061c100 irq 41
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
xhci_hcd 0000:00:14.0: PCI INT A: no GSI
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ATA-9: KINGSTON SHSS37A240G, SAFM00.Y, max UDMA/133
ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SHSS37A 00.Y PQ: 0 ANSI: 5
usb 2-4: new full-speed USB device number 2 using xhci_hcd
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
random: fast init done
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
usb 2-5: new full-speed USB device number 3 using xhci_hcd
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 1-1.7: new full-speed USB device number 3 using ehci-pci
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Created slice system-yoga\x2drotate.slice.
vboxdrv: loading out-of-tree module taints kernel.
EXT4-fs (sda2): re-mounted. Opts: data=ordered
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2394456656 Hz
vboxdrv: Successfully loaded version 5.1.26 (interface 0x002a0000)
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
systemd-journald[177]: Received request to flush runtime journal from PID 1
systemd-journald[177]: File /var/log/journal/435c5f6bfa5a4ef8b2ab469286063483/system.journal corrupted or uncleanly shut down, renaming and replacing.
usb 2-6: new high-speed USB device number 4 using xhci_hcd
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
tsc: Refined TSC clocksource calibration: 2394.457 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c360c9e, max_idle_ns: 440795302742 ns
tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
soc_button_array: probe of MSFT9000:00 failed with error -2
usb 1-1.8: new full-speed USB device number 4 using ehci-pci
snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC1D0:    hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC1D0:    mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC1D0:    inputs:
snd_hda_codec_conexant hdaudioC1D0:      Internal Mic=0x1a
snd_hda_codec_conexant hdaudioC1D0:      Mic=0x19
snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi: 
thinkpad_acpi: ThinkPad BIOS GQET27WW (1.07 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad S1 Yoga, model 20CD0038GE
thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
Adding 16777212k swap on /swapfile.  Priority:-1 extents:11 across:18087932k SSFS
wmi: Mapper loaded
ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20170303/evregion-300)
ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff8aec56926a78), AE_BAD_PARAMETER (20170303/psparse-543)
ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20170303/evregion-300)
ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff8aec56926a78), AE_BAD_PARAMETER (20170303/psparse-543)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 12c000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
usbcore: registered new interface driver btusb
ACPI: Battery Slot [BAT0] (battery present)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
ACPI: AC Adapter [AC] (on-line)
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
hidraw: raw HID events driver (C) Jiri Kosina
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
iwlwifi 0000:04:00.0: loaded firmware version 17.459231.0 op_mode iwlmvm
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
iTCO_vendor_support: vendor-support=0
iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/0003:04F3:0254.0001/input/input11
hid-multitouch 0003:04F3:0254.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-5/input0
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
media: Linux media interface: v0.10
kvm: disabled by bios
Linux video capture interface: v2.00
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
systemd-journald[177]: File /var/log/journal/435c5f6bfa5a4ef8b2ab469286063483/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
uvcvideo: Found UVC 1.00 device Integrated Camera (0bda:5720)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
uvcvideo 2-6:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 2-6:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 2-6:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input15
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: Wacom ISDv4 EC Pen as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8:1.0/0003:056A:00EC.0003/input/input16
wacom 0003:056A:00EC.0003: hidraw1: USB HID v1.10 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.8/input0
mousedev: PS/2 mouse device common for all mice
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
fbcon: inteldrmfb (fb0) is primary device
iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696]
clocksource: Switched to clocksource tsc
psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..]
psmouse serio1: synaptics: Trying to set up SMBus access
rmi4_smbus 8-002c: registering SMbus-connected sensor
rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM2911-001, fw id: 0
input: Synaptics TM2911-001 as /devices/rmi4-00/input/input19
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio2/input/input20
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25
random: crng init done
wlp4s0: authenticate with 24:65:11:14:36:00
wlp4s0: send auth to 24:65:11:14:36:00 (try 1/3)
wlp4s0: authenticated
wlp4s0: associate with 24:65:11:14:36:00 (try 1/3)
wlp4s0: RX AssocResp from 24:65:11:14:36:00 (capab=0x431 status=0 aid=1)
wlp4s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready

Return To ap2 System Information