dmesg - erlangen
microcode: microcode updated early to revision 0xba, date = 2017-04-09
Linux version 4.12.8-1-default (geeko@buildhost) (gcc version 7.1.1 20170629 [gcc-7-branch revision 249772] (SUSE Linux) ) #1 SMP PREEMPT Thu Aug 17 05:30:12 UTC 2017 (4d7933a)
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000005a497fff] usable
BIOS-e820: [mem 0x000000005a498000-0x000000005a498fff] ACPI NVS
BIOS-e820: [mem 0x000000005a499000-0x000000005a4e2fff] reserved
BIOS-e820: [mem 0x000000005a4e3000-0x000000005a534fff] usable
BIOS-e820: [mem 0x000000005a535000-0x000000005ac37fff] reserved
BIOS-e820: [mem 0x000000005ac38000-0x0000000076e47fff] usable
BIOS-e820: [mem 0x0000000076e48000-0x00000000777adfff] reserved
BIOS-e820: [mem 0x00000000777ae000-0x0000000077f99fff] ACPI NVS
BIOS-e820: [mem 0x0000000077f9a000-0x0000000077ffefff] ACPI data
BIOS-e820: [mem 0x0000000077fff000-0x0000000077ffffff] usable
BIOS-e820: [mem 0x0000000078000000-0x00000000780fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000875ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z170 Pro4S, BIOS P3.50 06/23/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x876000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 007C000000 mask 7FFC000000 uncachable
2 base 007A000000 mask 7FFE000000 uncachable
3 base 0079000000 mask 7FFF000000 uncachable
4 base 0078800000 mask 7FFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fc6a0-0x000fc6af] mapped at [ffff984b000fc6a0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff984b00096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x2705b0000, 0x2705b0fff] PGTABLE
BRK [0x2705b1000, 0x2705b1fff] PGTABLE
BRK [0x2705b2000, 0x2705b2fff] PGTABLE
BRK [0x2705b3000, 0x2705b3fff] PGTABLE
BRK [0x2705b4000, 0x2705b4fff] PGTABLE
BRK [0x2705b5000, 0x2705b5fff] PGTABLE
BRK [0x2705b6000, 0x2705b6fff] PGTABLE
BRK [0x2705b7000, 0x2705b7fff] PGTABLE
BRK [0x2705b8000, 0x2705b8fff] PGTABLE
BRK [0x2705b9000, 0x2705b9fff] PGTABLE
RAMDISK: [mem 0x36c61000-0x37627fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000077F31098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x0000000077F52160 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x0000000077F311E8 020F74 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x0000000077F99F80 000040
ACPI: APIC 0x0000000077F52270 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x0000000077F52330 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x0000000077F52378 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x0000000077F52418 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x0000000077F52458 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
ACPI: SSDT 0x0000000077F52490 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x0000000077F52800 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000077F52898 00002B (v02 INTEL UsbCTabl 00001000 INTL 20120913)
ACPI: DBGP 0x0000000077F528C8 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x0000000077F52900 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000077F52958 000619 (v02 INTEL xh_rvp08 00000000 INTL 20120913)
ACPI: AAFT 0x0000000077F52F78 0004FE (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: SSDT 0x0000000077F53478 005212 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x0000000077F58690 000042 (v01 00000000 00000000)
ACPI: SSDT 0x0000000077F586D8 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: DMAR 0x0000000077F59530 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: ASF! 0x0000000077F595D8 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000875ffffff]
NODE_DATA(0) allocated [mem 0x875fea000-0x875ffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000875ffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x000000005a497fff]
node 0: [mem 0x000000005a4e3000-0x000000005a534fff]
node 0: [mem 0x000000005ac38000-0x0000000076e47fff]
node 0: [mem 0x0000000077fff000-0x0000000077ffffff]
node 0: [mem 0x0000000100000000-0x0000000875ffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000875ffffff]
On node 0 totalpages: 8308374
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 7516 pages used for memmap
DMA32 zone: 481019 pages, LIFO batch:31
Normal zone: 122240 pages used for memmap
Normal zone: 7823360 pages, LIFO batch:31
Reserving Intel graphics memory at 0x0000000079000000-0x0000000088ffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x5a498000-0x5a498fff]
PM: Registered nosave memory: [mem 0x5a499000-0x5a4e2fff]
PM: Registered nosave memory: [mem 0x5a535000-0x5ac37fff]
PM: Registered nosave memory: [mem 0x76e48000-0x777adfff]
PM: Registered nosave memory: [mem 0x777ae000-0x77f99fff]
PM: Registered nosave memory: [mem 0x77f9a000-0x77ffefff]
PM: Registered nosave memory: [mem 0x78000000-0x780fffff]
PM: Registered nosave memory: [mem 0x78100000-0x78ffffff]
PM: Registered nosave memory: [mem 0x79000000-0x88ffffff]
PM: Registered nosave memory: [mem 0x89000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x89000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 39 pages/cpu @ffff985375c00000 s121240 r8192 d30312 u262144
pcpu-alloc: s121240 r8192 d30312 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8178533
Policy zone: Normal
log_buf_len individual max cpu contribution: 32768 bytes
log_buf_len total cpu_extra contributions: 229376 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 524288 bytes
early log buf free: 249352(95%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 4223688K/33233496K available (7482K kernel code, 1400K rwdata, 5324K rodata, 1868K init, 1364K bss, 620416K reserved, 0K cma-reserved)
ftrace: allocating 32065 entries in 126 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:2048 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 4000.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8016.00 BogoMIPS (lpj=16032000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170303/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170303/psobject-241)
ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20170303/tbxfload-228)
ACPI Error: 1 table load failures, 5 successful (20170303/tbxfload-246)
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 28K
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x00000077528000 end: 0x00000077547fff
DMAR: RMRR base: 0x00000078800000 end: 0x00000088ffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64135.59 BogoMIPS)
sched_clock: Marking stable (912000000, 0)->(912383857, -383857)
node 0 initialised, 7097348 pages in 56ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x5a498000-0x5a498fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x777ae000-0x77f99fff] (8306688 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 12:39:36, date: 08/28/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 21 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF984C8FD3E800 0007AA (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF984C8C3A3400 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF984C8FD3E000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF984C8FD43000 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x89000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf230000-0xdf23ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf24e000-0xdf24efff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf24d000-0xdf24dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf248000-0xdf249fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf24c000-0xdf24c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf24b000-0xdf24b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf244000-0xdf247fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf240000-0xdf243fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf220000-0xdf22ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf24a000-0xdf24a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdf200000-0xdf21ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:00:1b.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [168c:002e] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf10ffff 64bit]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:04:00.0: [144d:a802] type 00 class 0x010802
pci 0000:04:00.0: reg 0x10: [mem 0xdf010000-0xdf013fff 64bit]
pci 0000:04:00.0: reg 0x18: [io 0xe000-0xe0ff]
pci 0000:04:00.0: reg 0x30: [mem 0xdf000000-0xdf00ffff pref]
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1d.0: bridge window [mem 0xdf000000-0xdf0fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
e820: reserve RAM buffer [mem 0x5a498000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5a535000-0x5bffffff]
e820: reserve RAM buffer [mem 0x76e48000-0x77ffffff]
e820: reserve RAM buffer [mem 0x876000000-0x877ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0280-0x028f] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x02a0-0x02af] has been reserved
system 00:00: [io 0x02b0-0x02bf] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xff00-0xfffe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1b.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1d.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x89000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xdf000000-0xdf0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 10012K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x72e48000-0x76e48000] (64MB) mapped at [ffff984b72e48000-ffff984b76e47fff]
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39c5e21a6f1, max_idle_ns: 440795312983 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1503923976.662:1): state=initialized audit_enabled=0 res=1
workingset: timestamp_bits=37 max_order=23 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:1b.0: Signaling PME with IRQ 122
pcieport 0000:00:1c.0: Signaling PME with IRQ 123
pcieport 0000:00:1c.2: Signaling PME with IRQ 124
pcieport 0000:00:1d.0: Signaling PME with IRQ 125
vesafb: mode is 1920x1200x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffa9a784000000, using 9024k, total 9024k
Console: switching to colour frame buffer device 240x75
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b100 irq 126
ata2: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b180 irq 126
ata3: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b200 irq 126
ata4: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b280 irq 126
ata5: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b300 irq 126
ata6: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b380 irq 126
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
NET: Registered protocol family 10
Segment Routing with IPv6
RAS: Correctable Errors collector initialized.
microcode: sig=0x506e3, pf=0x2, revision=0xba
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 13:521:684
mem full: hash matches
rtc_cmos 00:04: setting system clock to 2017-08-28 12:39:37 UTC (1503923977)
PM: Hibernation image not present or could not be loaded.
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata1.00: ATA-9: WDC WD40EZRX-22SPEB0, 80.00A80, max UDMA/133
ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD40EZRX-22S 0A80 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1868K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 696K
Freeing unused kernel memory: 820K
systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Timers.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Audit Socket.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Local File Systems.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Swap.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Socket (/dev/log).
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Socket.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
sd 0:0:0:0: Attached scsi generic sg0 type 0
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.12.8-1-default xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
nvme nvme0: pci function 0000:04:00.0
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.12.8-1-default xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
[drm] Memory usable by graphics device = 4096M
checking generic (c0000000 8d0000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0f: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
fbcon: inteldrmfb (fb0) is primary device
nvme0n1: p1 p2 p3
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
random: fast init done
Console: switching to colour frame buffer device 240x75
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
random: crng init done
usb 1-7: new low-speed USB device number 2 using xhci_hcd
usb 1-7: New USB device found, idVendor=046d, idProduct=c05a
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: USB Optical Mouse
usb 1-7: Manufacturer: Logitech
systemd-journald[194]: Received SIGTERM from PID 1 (systemd).
systemd: 20 output lines suppressed due to ratelimiting
usb 1-8: new low-speed USB device number 3 using xhci_hcd
EXT4-fs (nvme0n1p2): re-mounted. Opts: acl
systemd-journald[375]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1503923978.657:2): apparmor="STATUS" operation="profile_load" name="ping" pid=409 comm="apparmor_parser"
audit: type=1400 audit(1503923978.663:3): apparmor="STATUS" operation="profile_load" name="klogd" pid=417 comm="apparmor_parser"
audit: type=1400 audit(1503923978.667:4): apparmor="STATUS" operation="profile_load" name="syslog-ng" pid=422 comm="apparmor_parser"
audit: type=1400 audit(1503923978.671:5): apparmor="STATUS" operation="profile_load" name="syslogd" pid=427 comm="apparmor_parser"
audit: type=1400 audit(1503923978.674:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/lessopen.sh" pid=433 comm="apparmor_parser"
audit: type=1400 audit(1503923978.680:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=439 comm="apparmor_parser"
audit: type=1400 audit(1503923978.680:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=439 comm="apparmor_parser"
audit: type=1400 audit(1503923978.680:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=439 comm="apparmor_parser"
audit: type=1400 audit(1503923978.680:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=439 comm="apparmor_parser"
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
wmi: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input4
usb 1-8: New USB device found, idVendor=046a, idProduct=0011
usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
PTP clock support registered
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
iTCO_vendor_support: vendor-support=0
Adding 33550332k swap on /dev/nvme0n1p1. Priority:-1 extents:1 across:33550332k SSFS
EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: acl
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:046D:C05A.0001/input/input5
hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-7/input0
input: HID 046a:0011 as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046A:0011.0002/input/input6
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: acl
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffa9a7841a0000, irq=18
ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
hid-generic 0003:046A:0011.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:14.0-8/input0
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: acl
No iBFT detected.
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
NET: Registered protocol family 17
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:9a:e1:50
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[drm] RC6 on
wlp3s0: authenticate with 08:96:d7:e2:d6:d3
wlp3s0: send auth to 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: RX AssocResp from 08:96:d7:e2:d6:d3 (capab=0x431 status=0 aid=2)
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
wlp3s0: associated
fuse init (API version 7.26)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.025 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from 08:96:d7:e2:d6:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
serial 00:01: disabled
serial 00:01: System wakeup disabled by ACPI
e1000e: EEE TX LPI TIMER: 00000011
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 418.947 msecs
PM: late suspend of devices complete after 20.391 msecs
e1000e 0000:00:1f.6: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 39.961 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 16
Broke affinity for irq 126
smpboot: CPU 5 is now offline
Broke affinity for irq 16
Broke affinity for irq 123
Broke affinity for irq 126
smpboot: CPU 6 is now offline
Broke affinity for irq 16
Broke affinity for irq 122
Broke affinity for irq 123
Broke affinity for irq 125
Broke affinity for irq 126
Broke affinity for irq 127
Broke affinity for irq 129
smpboot: CPU 7 is now offline
[Firmware Bug]: TSC ADJUST differs: CPU0 0 --> -3154764567. Restoring
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Suspended for 16483.726 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
microcode: sig=0x506e3, pf=0x2, revision=0x74
microcode: updated to revision 0xba, date = 2017-04-09
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
microcode: sig=0x506e3, pf=0x2, revision=0xba
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 41.949 msecs
PM: early resume of devices complete after 21.873 msecs
e1000e 0000:00:1f.6: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
serial 00:01: activated
rtc_cmos 00:04: System wakeup disabled by ACPI
ata5: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[drm] RC6 on
ata1.00: configured for UDMA/133
PM: resume of devices complete after 11380.557 msecs
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
wlp3s0: authenticate with 08:96:d7:e2:d6:d3
wlp3s0: send auth to 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: RX AssocResp from 08:96:d7:e2:d6:d3 (capab=0x431 status=0 aid=2)
wlp3s0: associated
wlp3s0: authenticate with 08:96:d7:e2:d6:d3
wlp3s0: send auth to 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: RX AssocResp from 08:96:d7:e2:d6:d3 (capab=0x431 status=0 aid=2)
wlp3s0: associated
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from 08:96:d7:e2:d6:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
serial 00:01: disabled
serial 00:01: System wakeup disabled by ACPI
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 222.681 msecs
PM: late suspend of devices complete after 17.069 msecs
e1000e 0000:00:1f.6: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 39.855 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 16
Broke affinity for irq 129
smpboot: CPU 5 is now offline
Broke affinity for irq 16
Broke affinity for irq 123
Broke affinity for irq 127
Broke affinity for irq 129
smpboot: CPU 6 is now offline
Broke affinity for irq 16
Broke affinity for irq 122
Broke affinity for irq 123
Broke affinity for irq 125
Broke affinity for irq 127
Broke affinity for irq 129
smpboot: CPU 7 is now offline
[Firmware Bug]: TSC ADJUST differs: CPU0 0 --> -3160348166. Restoring
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Suspended for 36883.927 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
microcode: sig=0x506e3, pf=0x2, revision=0x74
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
microcode: sig=0x506e3, pf=0x2, revision=0xba
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 42.101 msecs
PM: early resume of devices complete after 23.974 msecs
e1000e 0000:00:1f.6: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
serial 00:01: activated
rtc_cmos 00:04: System wakeup disabled by ACPI
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
[drm] RC6 on
ata1.00: configured for UDMA/133
PM: resume of devices complete after 11428.754 msecs
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
wlp3s0: authenticate with 08:96:d7:e2:d6:d3
wlp3s0: send auth to 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: RX AssocResp from 08:96:d7:e2:d6:d3 (capab=0x431 status=0 aid=2)
wlp3s0: associated
usb 1-6: new full-speed USB device number 4 using xhci_hcd
usb 1-6: New USB device found, idVendor=0fcf, idProduct=1009
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: ANT USB-m Stick
usb 1-6: Manufacturer: Dynastream Innovations
usb 1-6: SerialNumber: 192
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver usb_serial_simple
usb_serial_simple 1-6:1.0: suunto converter detected
usb 1-6: suunto converter now attached to ttyUSB0
suunto ttyUSB0: suunto converter now disconnected from ttyUSB0
usb_serial_simple 1-6:1.0: device disconnected
usb 1-6: reset full-speed USB device number 4 using xhci_hcd
usb 1-6: USB disconnect, device number 4
usb 1-6: new full-speed USB device number 5 using xhci_hcd
usb 1-6: device descriptor read/64, error -71
usb 1-6: device descriptor read/64, error -71
usb 1-6: new full-speed USB device number 7 using xhci_hcd
usb 1-6: Device not responding to setup address.
usb 1-6: Device not responding to setup address.
usb 1-6: device not accepting address 7, error -71
usb 1-6: new full-speed USB device number 9 using xhci_hcd
usb 1-6: New USB device found, idVendor=091e, idProduct=2519
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=5
usb 1-6: SerialNumber: 0000e7434bc9
usb-storage 1-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-6:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access Garmin GARMIN Flash 1.00 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg1 type 0
scsi 6:0:0:1: Direct-Access Garmin GARMIN Card 1.00 PQ: 0 ANSI: 5
sd 6:0:0:1: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 7634944 512-byte logical blocks: (3.91 GB/3.64 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 6:0:0:1: [sdc] 15353856 512-byte logical blocks: (7.86 GB/7.32 GiB)
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:1: [sdc] Write Protect is off
sd 6:0:0:1: [sdc] Mode Sense: 23 00 00 00
sd 6:0:0:1: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:
sdc: sdc1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:1: [sdc] Attached SCSI removable disk
FAT-fs (sdb): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 1-6: USB disconnect, device number 9
sd 6:0:0:0: [sdb] Synchronizing SCSI cache
sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 6:0:0:1: [sdc] Synchronizing SCSI cache
sd 6:0:0:1: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from 08:96:d7:e2:d6:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
serial 00:01: disabled
serial 00:01: System wakeup disabled by ACPI
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 240.460 msecs
PM: late suspend of devices complete after 19.720 msecs
e1000e 0000:00:1f.6: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 39.990 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 16
Broke affinity for irq 129
smpboot: CPU 5 is now offline
Broke affinity for irq 16
Broke affinity for irq 123
Broke affinity for irq 126
Broke affinity for irq 129
smpboot: CPU 6 is now offline
Broke affinity for irq 16
Broke affinity for irq 122
Broke affinity for irq 123
Broke affinity for irq 125
Broke affinity for irq 126
Broke affinity for irq 129
smpboot: CPU 7 is now offline
[Firmware Bug]: TSC ADJUST differs: CPU0 0 --> -3163721944. Restoring
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Suspended for 17449.247 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
microcode: sig=0x506e3, pf=0x2, revision=0x74
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
microcode: sig=0x506e3, pf=0x2, revision=0xba
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 38.137 msecs
PM: early resume of devices complete after 23.537 msecs
e1000e 0000:00:1f.6: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
serial 00:01: activated
rtc_cmos 00:04: System wakeup disabled by ACPI
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
[drm] RC6 on
ata1.00: configured for UDMA/133
PM: resume of devices complete after 11527.650 msecs
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
wlp3s0: authenticate with 08:96:d7:e2:d6:d3
wlp3s0: send auth to 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: RX AssocResp from 08:96:d7:e2:d6:d3 (capab=0x431 status=0 aid=2)
wlp3s0: associated
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from 08:96:d7:e2:d6:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
serial 00:01: disabled
serial 00:01: System wakeup disabled by ACPI
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 412.122 msecs
PM: late suspend of devices complete after 22.094 msecs
e1000e 0000:00:1f.6: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 39.961 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 16
Broke affinity for irq 129
smpboot: CPU 5 is now offline
Broke affinity for irq 16
Broke affinity for irq 123
Broke affinity for irq 126
Broke affinity for irq 127
Broke affinity for irq 129
smpboot: CPU 6 is now offline
Broke affinity for irq 16
Broke affinity for irq 122
Broke affinity for irq 123
Broke affinity for irq 125
Broke affinity for irq 126
Broke affinity for irq 127
Broke affinity for irq 129
smpboot: CPU 7 is now offline
[Firmware Bug]: TSC ADJUST differs: CPU0 0 --> -3155637698. Restoring
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Suspended for 22794.114 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
microcode: sig=0x506e3, pf=0x2, revision=0x74
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
microcode: sig=0x506e3, pf=0x2, revision=0xba
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 38.244 msecs
PM: early resume of devices complete after 23.961 msecs
e1000e 0000:00:1f.6: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
serial 00:01: activated
rtc_cmos 00:04: System wakeup disabled by ACPI
ata2: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
[drm] RC6 on
ata1.00: configured for UDMA/133
PM: resume of devices complete after 11415.539 msecs
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
wlp3s0: authenticate with 08:96:d7:e2:d6:d3
wlp3s0: send auth to 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: RX AssocResp from 08:96:d7:e2:d6:d3 (capab=0x431 status=0 aid=2)
wlp3s0: associated
usb 2-6: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-6: New USB device found, idVendor=05e3, idProduct=0743
usb 2-6: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 2-6: Product: USB Storage
usb 2-6: Manufacturer: Generic
usb 2-6: SerialNumber: 000000000828
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-6:1.0
scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 0828 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 63272960 512-byte logical blocks: (32.4 GB/30.2 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 2-6: USB disconnect, device number 2
usb 1-6: new full-speed USB device number 10 using xhci_hcd
usb 1-6: device descriptor read/64, error -71
usb 1-6: device descriptor read/64, error -71
usb 1-6: new full-speed USB device number 12 using xhci_hcd
usb 1-6: Device not responding to setup address.
usb 1-6: Device not responding to setup address.
usb 1-6: device not accepting address 12, error -71
usb 1-6: new full-speed USB device number 14 using xhci_hcd
usb 1-6: New USB device found, idVendor=091e, idProduct=2519
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=5
usb 1-6: SerialNumber: 0000e7434bc9
usb-storage 1-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-6:1.0
scsi 6:0:0:0: Direct-Access Garmin GARMIN Flash 1.00 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg1 type 0
scsi 6:0:0:1: Direct-Access Garmin GARMIN Card 1.00 PQ: 0 ANSI: 5
sd 6:0:0:1: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 7634944 512-byte logical blocks: (3.91 GB/3.64 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:1: [sdc] 15353856 512-byte logical blocks: (7.86 GB/7.32 GiB)
sd 6:0:0:1: [sdc] Write Protect is off
sd 6:0:0:1: [sdc] Mode Sense: 23 00 00 00
sd 6:0:0:1: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:
sdc: sdc1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:1: [sdc] Attached SCSI removable disk
FAT-fs (sdb): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 1-6: USB disconnect, device number 14
sd 6:0:0:0: [sdb] Synchronizing SCSI cache
sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 6:0:0:1: [sdc] Synchronizing SCSI cache
sd 6:0:0:1: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 2-6: new SuperSpeed USB device number 3 using xhci_hcd
usb 2-6: New USB device found, idVendor=05e3, idProduct=0743
usb 2-6: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 2-6: Product: USB Storage
usb 2-6: Manufacturer: Generic
usb 2-6: SerialNumber: 000000000828
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-6:1.0
scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 0828 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 63272960 512-byte logical blocks: (32.4 GB/30.2 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 2-6: USB disconnect, device number 3
usb 1-6: new high-speed USB device number 15 using xhci_hcd
usb 1-6: New USB device found, idVendor=04da, idProduct=2372
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: DMC-TZ71
usb 1-6: Manufacturer: Panasonic
usb 1-6: SerialNumber: 000000000000000000HX1L05290943
usb-storage 1-6:1.0: USB Mass Storage device detected
usb-storage 1-6:1.0: Quirks match for vid 04da pid 2372: 90
scsi host6: usb-storage 1-6:1.0
scsi 6:0:0:0: Direct-Access MATSHITA DMC-TZ71 0100 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 63272960
sd 6:0:0:0: [sdb] 63272959 512-byte logical blocks: (32.4 GB/30.2 GiB)
sd 6:0:0:0: [sdb] Write Protect is on
sd 6:0:0:0: [sdb] Mode Sense: 23 00 80 00
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 63272960
sdb: sdb1
sdb: p1 size 63264768 extends beyond EOD, enabling native capacity
sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 63272960
sdb: sdb1
sdb: p1 size 63264768 extends beyond EOD, truncated
sd 6:0:0:0: [sdb] Adjusting the sector count from its reported value: 63272960
sd 6:0:0:0: [sdb] Attached SCSI removable disk
usb 1-6: USB disconnect, device number 15
usb 1-6: new high-speed USB device number 16 using xhci_hcd
usb 1-6: New USB device found, idVendor=04da, idProduct=2372
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: DMC-TZ71
usb 1-6: Manufacturer: Panasonic
usb 1-6: SerialNumber: 000000000000000000HX1L05290943
usb-storage 1-6:1.0: USB Mass Storage device detected
usb-storage 1-6:1.0: Quirks match for vid 04da pid 2372: 90
scsi host6: usb-storage 1-6:1.0
usb 1-6: USB disconnect, device number 16
usb 1-6: new high-speed USB device number 17 using xhci_hcd
usb 1-6: New USB device found, idVendor=04da, idProduct=2372
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: DMC-TZ71
usb 1-6: Manufacturer: Panasonic
usb 1-6: SerialNumber: 000000000000000000HX1L05290943
usb-storage 1-6:1.0: USB Mass Storage device detected
usb-storage 1-6:1.0: Quirks match for vid 04da pid 2372: 90
scsi host6: usb-storage 1-6:1.0
usb 1-6: USB disconnect, device number 17
usb 1-6: new high-speed USB device number 18 using xhci_hcd
usb 1-6: New USB device found, idVendor=04da, idProduct=2372
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: DMC-TZ71
usb 1-6: Manufacturer: Panasonic
usb 1-6: SerialNumber: 000000000000000000HX1L05290943
usb-storage 1-6:1.0: USB Mass Storage device detected
usb-storage 1-6:1.0: Quirks match for vid 04da pid 2372: 90
scsi host6: usb-storage 1-6:1.0
usb 1-6: USB disconnect, device number 18
usb 1-9: new high-speed USB device number 19 using xhci_hcd
usb 1-9: New USB device found, idVendor=05e3, idProduct=0743
usb 1-9: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 1-9: Product: USB Storage
usb 1-9: Manufacturer: Generic
usb 1-9: SerialNumber: 000000000828
usb-storage 1-9:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-9:1.0
scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 0828 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 63272960 512-byte logical blocks: (32.4 GB/30.2 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 1-9: USB disconnect, device number 19
usb 1-6: new high-speed USB device number 20 using xhci_hcd
usb 1-6: New USB device found, idVendor=04da, idProduct=2372
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: DMC-TZ71
usb 1-6: Manufacturer: Panasonic
usb 1-6: SerialNumber: 000000000000000000HX1L05290943
usb-storage 1-6:1.0: USB Mass Storage device detected
usb-storage 1-6:1.0: Quirks match for vid 04da pid 2372: 90
scsi host6: usb-storage 1-6:1.0
usb 1-6: USB disconnect, device number 20
usb 1-6: new full-speed USB device number 21 using xhci_hcd
usb 1-6: New USB device found, idVendor=0fcf, idProduct=1009
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: ANT USB-m Stick
usb 1-6: Manufacturer: Dynastream Innovations
usb 1-6: SerialNumber: 192
usb_serial_simple 1-6:1.0: suunto converter detected
usb 1-6: suunto converter now attached to ttyUSB0
suunto ttyUSB0: suunto converter now disconnected from ttyUSB0
usb_serial_simple 1-6:1.0: device disconnected
usb 1-6: reset full-speed USB device number 21 using xhci_hcd
usb 1-6: reset full-speed USB device number 21 using xhci_hcd
usb 1-6: USB disconnect, device number 21
perf: interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from 08:96:d7:e2:d6:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
serial 00:01: disabled
serial 00:01: System wakeup disabled by ACPI
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 128.668 msecs
PM: late suspend of devices complete after 23.690 msecs
e1000e 0000:00:1f.6: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 39.990 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 123
smpboot: CPU 5 is now offline
Broke affinity for irq 123
Broke affinity for irq 124
smpboot: CPU 6 is now offline
Broke affinity for irq 16
Broke affinity for irq 123
Broke affinity for irq 124
Broke affinity for irq 125
Broke affinity for irq 126
Broke affinity for irq 127
smpboot: CPU 7 is now offline
[Firmware Bug]: TSC ADJUST differs: CPU0 0 --> -3165216987. Restoring
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Suspended for 17778.552 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
microcode: sig=0x506e3, pf=0x2, revision=0x74
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
microcode: sig=0x506e3, pf=0x2, revision=0xba
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 38.051 msecs
PM: early resume of devices complete after 23.956 msecs
e1000e 0000:00:1f.6: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
serial 00:01: activated
rtc_cmos 00:04: System wakeup disabled by ACPI
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
[drm] RC6 on
ata1.00: configured for UDMA/133
PM: resume of devices complete after 11384.921 msecs
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
wlp3s0: authenticate with 08:96:d7:e2:d6:d3
wlp3s0: send auth to 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: RX AssocResp from 08:96:d7:e2:d6:d3 (capab=0x431 status=0 aid=2)
wlp3s0: associated
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from 08:96:d7:e2:d6:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
serial 00:01: disabled
serial 00:01: System wakeup disabled by ACPI
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 412.565 msecs
PM: late suspend of devices complete after 20.132 msecs
e1000e 0000:00:1f.6: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 39.936 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
Broke affinity for irq 124
Broke affinity for irq 127
smpboot: CPU 5 is now offline
Broke affinity for irq 16
Broke affinity for irq 124
Broke affinity for irq 127
Broke affinity for irq 129
smpboot: CPU 6 is now offline
Broke affinity for irq 16
Broke affinity for irq 123
Broke affinity for irq 124
Broke affinity for irq 125
Broke affinity for irq 127
Broke affinity for irq 129
smpboot: CPU 7 is now offline
[Firmware Bug]: TSC ADJUST differs: CPU0 0 --> -3159993468. Restoring
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Suspended for 28315.929 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
microcode: sig=0x506e3, pf=0x2, revision=0x74
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
microcode: sig=0x506e3, pf=0x2, revision=0xba
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 36.864 msecs
PM: early resume of devices complete after 23.951 msecs
e1000e 0000:00:1f.6: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
serial 00:01: activated
rtc_cmos 00:04: System wakeup disabled by ACPI
ata2: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
[drm] RC6 on
ata1.00: configured for UDMA/133
PM: resume of devices complete after 11424.545 msecs
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
wlp3s0: authenticate with 08:96:d7:e2:d6:d3
wlp3s0: send auth to 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: RX AssocResp from 08:96:d7:e2:d6:d3 (capab=0x431 status=0 aid=2)
wlp3s0: associated
perf: interrupt took too long (3143 > 3137), lowering kernel.perf_event_max_sample_rate to 63500
usb 1-6: new full-speed USB device number 22 using xhci_hcd
usb 1-6: New USB device found, idVendor=0fcf, idProduct=1009
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: ANT USB-m Stick
usb 1-6: Manufacturer: Dynastream Innovations
usb 1-6: SerialNumber: 192
usb_serial_simple 1-6:1.0: suunto converter detected
usb 1-6: suunto converter now attached to ttyUSB0
suunto ttyUSB0: suunto converter now disconnected from ttyUSB0
usb_serial_simple 1-6:1.0: device disconnected
usb 1-6: reset full-speed USB device number 22 using xhci_hcd
usb 1-6: USB disconnect, device number 22
usb 2-6: new SuperSpeed USB device number 4 using xhci_hcd
usb 2-6: New USB device found, idVendor=0781, idProduct=5580
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: Extreme
usb 2-6: Manufacturer: SanDisk
usb 2-6: SerialNumber: AA011208142056380851
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-6:1.0
scsi 6:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 53 00 00 08
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
xhci_hcd 0000:00:14.0: Cannot set link state.
usb usb2-port6: cannot disable (err = -32)
usb 2-6: USB disconnect, device number 4
sd 6:0:0:0: [sdb] Synchronizing SCSI cache
sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 2-6: new SuperSpeed USB device number 5 using xhci_hcd
usb 2-6: New USB device found, idVendor=1058, idProduct=1078
usb 2-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-6: Product: Elements 1078
usb 2-6: Manufacturer: Western Digital
usb 2-6: SerialNumber: 575844314133364E38365032
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-6:1.0
scsi 6:0:0:0: Direct-Access WD Elements 1078 1065 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] Spinning up disk...
.
.
.
.
.
.
ready
sd 6:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 53 00 10 08
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sdb1): recovery complete
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
xhci_hcd 0000:00:14.0: Cannot set link state.
usb usb2-port6: cannot disable (err = -32)
usb 2-6: USB disconnect, device number 5
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from 08:96:d7:e2:d6:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
serial 00:01: disabled
serial 00:01: System wakeup disabled by ACPI
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 249.809 msecs
PM: late suspend of devices complete after 19.758 msecs
e1000e 0000:00:1f.6: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 39.951 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
Broke affinity for irq 126
smpboot: CPU 4 is now offline
Broke affinity for irq 124
Broke affinity for irq 126
Broke affinity for irq 127
smpboot: CPU 5 is now offline
Broke affinity for irq 16
Broke affinity for irq 124
Broke affinity for irq 126
Broke affinity for irq 127
Broke affinity for irq 129
smpboot: CPU 6 is now offline
Broke affinity for irq 16
Broke affinity for irq 123
Broke affinity for irq 124
Broke affinity for irq 125
Broke affinity for irq 126
Broke affinity for irq 127
Broke affinity for irq 129
smpboot: CPU 7 is now offline
[Firmware Bug]: TSC ADJUST differs: CPU0 0 --> -3158749578. Restoring
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Suspended for 29551.786 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
microcode: sig=0x506e3, pf=0x2, revision=0x74
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
microcode: sig=0x506e3, pf=0x2, revision=0xba
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 38.069 msecs
PM: early resume of devices complete after 23.990 msecs
e1000e 0000:00:1f.6: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
serial 00:01: activated
rtc_cmos 00:04: System wakeup disabled by ACPI
ata4: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
[drm] RC6 on
ata1.00: configured for UDMA/133
PM: resume of devices complete after 11417.422 msecs
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
wlp3s0: authenticate with 08:96:d7:e2:d6:d3
wlp3s0: send auth to 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 08:96:d7:e2:d6:d3 (try 1/3)
wlp3s0: RX AssocResp from 08:96:d7:e2:d6:d3 (capab=0x431 status=0 aid=2)
wlp3s0: associated
perf: interrupt took too long (3945 > 3928), lowering kernel.perf_event_max_sample_rate to 50500
usb 2-6: new SuperSpeed USB device number 6 using xhci_hcd
usb 2-6: New USB device found, idVendor=0781, idProduct=5580
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: Extreme
usb 2-6: Manufacturer: SanDisk
usb 2-6: SerialNumber: AA011208142056380851
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-6:1.0
scsi 6:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 53 00 00 08
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
xhci_hcd 0000:00:14.0: Cannot set link state.
usb usb2-port6: cannot disable (err = -32)
usb 2-6: USB disconnect, device number 6
usb 2-6: new SuperSpeed USB device number 7 using xhci_hcd
usb 2-6: New USB device found, idVendor=0781, idProduct=5580
usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-6: Product: Extreme
usb 2-6: Manufacturer: SanDisk
usb 2-6: SerialNumber: AA011208142056380851
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-6:1.0
scsi 6:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 53 00 00 08
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
xhci_hcd 0000:00:14.0: Cannot set link state.
usb usb2-port6: cannot disable (err = -32)
usb 2-6: USB disconnect, device number 7