dmesg - r2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.65-1+deb7u1
Command line: root=LABEL=DOROOT ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fffb000 (usable)
BIOS-e820: 000000007fffb000 - 0000000080000000 (reserved)
BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: DigitalOcean Droplet, BIOS 20161103 11/03/2016
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7fffb max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask FF80000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [ffff8800000f1260] f1260
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009a000] 9a000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-000000007fffb000
0000000000 - 0040000000 page 1G
0040000000 - 007fe00000 page 2M
007fe00000 - 007fffb000 page 4k
kernel direct mapping tables up to 7fffb000 @ 1fffd000-20000000
RAMDISK: 7f621000 - 7fff0000
ACPI: RSDP 00000000000f10b0 00014 (v00 BOCHS )
ACPI: RSDT 000000007fffe410 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 000000007fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 000000007fffe450 01135 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
ACPI: FACS 000000007fffff40 00040
ACPI: SSDT 000000007ffff6c0 0087A (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 000000007ffff5d0 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 000000007ffff590 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007fffb000
Initmem setup node 0 0000000000000000-000000007fffb000
NODE_DATA [000000007fff6000 - 000000007fffafff]
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:16a8701, boot clock
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007ce00000-ffff88007e9fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fffb
On node 0 totalpages: 524170
DMA zone: 56 pages used for memmap
DMA zone: 5 pages reserved
DMA zone: 3922 pages, LIFO batch:0
DMA32 zone: 7112 pages used for memmap
DMA32 zone: 513075 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7effc000)
Booting paravirtualized kernel on KVM
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88007f200000 s78848 r8192 d23552 u1048576
pcpu-alloc: s78848 r8192 d23552 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
kvm-clock: cpu 0, msr 0:7f212701, primary cpu clock
KVM setup async PF for cpu 0
kvm-stealtime: cpu 0, msr 7f20cfc0
Built 1 zonelists in Node order, mobility grouping on. Total pages: 516997
Policy zone: DMA32
Kernel command line: root=LABEL=DOROOT ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2049228k/2097132k available (3433k kernel code, 452k absent, 47452k reserved, 3305k data, 576k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:512 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Detected 2299.998 MHz processor.
Calibrating delay loop (skipped) preset value.. 4599.99 BogoMIPS (lpj=9199992)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
mce: CPU supports 10 MCE banks
ACPI: Core revision 20110623
Enabling x2apic
Enabled x2apic
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2630 0 @ 2.30GHz stepping 07
Performance Events: SandyBridge events, Intel PMU driver.
... version: 2
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9a000
KVM setup async PF for cpu 1
kvm-stealtime: cpu 1, msr 7f30cfc0
kvm-clock: cpu 1, msr 0:7f312701, secondary cpu clock
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (9199.99 BogoMIPS).
devtmpfs: initialized
print_constraints: dummy:
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff]
pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
pci 0000:00:01.1: reg 20: [io 0xc120-0xc12f]
pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
pci 0000:00:01.2: reg 20: [io 0xc080-0xc09f]
pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
pci 0000:00:02.0: [1b36:0100] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0: reg 14: [mem 0xfc000000-0xfcffffff]
pci 0000:00:02.0: reg 18: [mem 0xfd090000-0xfd091fff]
pci 0000:00:02.0: reg 1c: [io 0xc0a0-0xc0bf]
pci 0000:00:02.0: reg 30: [mem 0xfd080000-0xfd08ffff pref]
pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
pci 0000:00:03.0: reg 10: [io 0xc0c0-0xc0df]
pci 0000:00:03.0: reg 14: [mem 0xfd092000-0xfd092fff]
pci 0000:00:03.0: reg 30: [mem 0xfd000000-0xfd03ffff pref]
pci 0000:00:04.0: [1af4:1000] type 0 class 0x000200
pci 0000:00:04.0: reg 10: [io 0xc0e0-0xc0ff]
pci 0000:00:04.0: reg 14: [mem 0xfd093000-0xfd093fff]
pci 0000:00:04.0: reg 30: [mem 0xfd040000-0xfd07ffff pref]
pci 0000:00:05.0: [1af4:1004] type 0 class 0x000100
pci 0000:00:05.0: reg 10: [io 0xc000-0xc03f]
pci 0000:00:05.0: reg 14: [mem 0xfd094000-0xfd094fff]
pci 0000:00:06.0: [1af4:1001] type 0 class 0x000100
pci 0000:00:06.0: reg 10: [io 0xc040-0xc07f]
pci 0000:00:06.0: reg 14: [mem 0xfd095000-0xfd095fff]
pci 0000:00:07.0: [1af4:1002] type 0 class 0x0000ff
pci 0000:00:07.0: reg 10: [io 0xc100-0xc11f]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000007fffb000 - 000000007fffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switching to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x80000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0070-0x0071]
pnp 00:01: [irq 8]
pnp 00:01: [io 0x0072-0x0077]
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [io 0x0060]
pnp 00:02: [io 0x0064]
pnp 00:02: [irq 1]
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: [irq 12]
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:04: [io 0x03f2-0x03f5]
pnp 00:04: [io 0x03f7]
pnp 00:04: [irq 6]
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:05: [io 0x03f8-0x03ff]
pnp 00:05: [irq 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [mem 0xfed00000-0xfed003ff]
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 7 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 0 pci_try_num: 1
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 10044k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1497036283.564:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4022
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
intel_idle: does not run on family 6 model 45
ERST: Table is not found!
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:01: setting system clock to 2017-06-09 19:24:43 UTC (1497036283)
Initializing network drop monitor service
Freeing unused kernel memory: 576k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 644k freed
Freeing unused kernel memory: 688k freed
udevd[47]: starting version 175
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
virtio-pci 0000:00:03.0: setting latency timer to 64
virtio-pci 0000:00:04.0: setting latency timer to 64
usbcore: registered new interface driver hub
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
virtio-pci 0000:00:05.0: setting latency timer to 64
libata version 3.00 loaded.
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
virtio-pci 0000:00:06.0: setting latency timer to 64
virtio-pci 0000:00:07.0: setting latency timer to 64
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c080
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
virtio-pci 0000:00:03.0: irq 40 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 41 for MSI/MSI-X
virtio-pci 0000:00:03.0: irq 42 for MSI/MSI-X
FDC 0 is a S82078B
virtio-pci 0000:00:06.0: irq 43 for MSI/MSI-X
virtio-pci 0000:00:06.0: irq 44 for MSI/MSI-X
virtio-pci 0000:00:04.0: irq 45 for MSI/MSI-X
virtio-pci 0000:00:04.0: irq 46 for MSI/MSI-X
virtio-pci 0000:00:04.0: irq 47 for MSI/MSI-X
virtio-pci 0000:00:05.0: irq 48 for MSI/MSI-X
virtio-pci 0000:00:05.0: irq 49 for MSI/MSI-X
virtio-pci 0000:00:05.0: irq 50 for MSI/MSI-X
virtio-pci 0000:00:05.0: irq 51 for MSI/MSI-X
vda: vda1
scsi2 : Virtio SCSI HBA
EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
Refined TSC clocksource calibration: 2300.000 MHz.
udevd[295]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
input: PC Speaker as /devices/platform/pcspkr/input/input2
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
Error: Driver 'pcspkr' is already registered, aborting...
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
EXT4-fs (vda1): re-mounted. Opts: (null)
EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
postgres (2751): /proc/2751/oom_adj is deprecated, please use /proc/2751/oom_score_adj instead.
eth0: no IPv6 routers present
eth1: no IPv6 routers present
Clocksource tsc unstable (delta = 7269508642 ns)
hrtimer: interrupt took 24359050 ns
UDP: bad checksum. From 60.191.40.196:23841 to 104.236.250.5:80 ulen 49
UDP: bad checksum. From 60.191.40.196:23841 to 104.236.250.5:80 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:2000 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:2000 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:2086 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:2086 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:2152 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:2152 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:2181 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:2181 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:623 ulen 31
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:1099 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:11211 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:502 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:1962 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:161 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:37 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:515 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:6379 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:49 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:1200 ulen 49
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:2455 ulen 49
UDP: bad checksum. From 104.243.41.166:1900 to 104.236.250.5:1900 ulen 98
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:53 ulen 37
UDP: bad checksum. From 60.191.29.20:23841 to 104.236.250.5:161 ulen 49
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com