dmesg - mrbayes
Linux version 4.11.8-300.fc26.x86_64 ([email protected]) (gcc version 7.1.1 20170622 (Red Hat 7.1.1-3) (GCC) ) #1 SMP Thu Jun 29 20:09:48 UTC 2017
Command line: BOOT_IMAGE=/vmlinuz-4.11.8-300.fc26.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=es_MX.UTF-8
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000994b5fff] usable
BIOS-e820: [mem 0x00000000994b6000-0x0000000099db5fff] reserved
BIOS-e820: [mem 0x0000000099db6000-0x000000009f4befff] usable
BIOS-e820: [mem 0x000000009f4bf000-0x000000009f8befff] reserved
BIOS-e820: [mem 0x000000009f8bf000-0x000000009fbbefff] ACPI NVS
BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
BIOS-e820: [mem 0x000000009fc00000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f0a00000-0x00000000f0afffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: Acer Aspire E5-522/Nami_CZL, BIOS V1.01 03/24/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 00FF800000 mask FFFF800000 write-protect
1 base 0000000000 mask FF80000000 write-back
2 base 0080000000 mask FFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000021f000000 aka 8688M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x9fc00 max_arch_pfn = 0x400000000
Base memory trampoline at [ffffa0e2c0099000] 99000 size 24576
Using GB pages for direct mapping
BRK [0x1df384000, 0x1df384fff] PGTABLE
BRK [0x1df385000, 0x1df385fff] PGTABLE
BRK [0x1df386000, 0x1df386fff] PGTABLE
BRK [0x1df387000, 0x1df387fff] PGTABLE
BRK [0x1df388000, 0x1df388fff] PGTABLE
BRK [0x1df389000, 0x1df389fff] PGTABLE
BRK [0x1df38a000, 0x1df38afff] PGTABLE
BRK [0x1df38b000, 0x1df38bfff] PGTABLE
BRK [0x1df38c000, 0x1df38cfff] PGTABLE
BRK [0x1df38d000, 0x1df38dfff] PGTABLE
RAMDISK: [mem 0x35287000-0x3693bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
ACPI: XSDT 0x000000009FBD6188 0000C4 (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 0x000000009FBF4000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: DSDT 0x000000009FBE5000 0073B8 (v01 ACRSYS ACRPRDCT 00040000 1025 00040000)
ACPI: FACS 0x000000009FBBB000 000040
ACPI: SSDT 0x000000009FBD7000 00009B (v01 AMD?CH FCHACPI 00001000 INTL 20130117)
ACPI: UEFI 0x000000009FBFC000 001036 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: UEFI 0x000000009FBFB000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: SSDT 0x000000009FBF7000 003548 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: ASF! 0x000000009FBF6000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: BOOT 0x000000009FBF5000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: HPET 0x000000009FBF3000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: APIC 0x000000009FBF2000 000090 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: MCFG 0x000000009FBF1000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SPCR 0x000000009FBF0000 000050 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: WDAT 0x000000009FBEF000 0001AC (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: WDRT 0x000000009FBEE000 000047 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: MSDM 0x000000009FBED000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000009FBE4000 000CB4 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000009FBDF000 0048A6 (v02 ACRSYS ACRPRDCT 00000002 1025 00040000)
ACPI: CRAT 0x000000009FBDE000 0003A8 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000009FBDC000 0014D0 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000009FBDA000 0015B8 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: FPDT 0x000000009FBD9000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021effffff]
NODE_DATA(0) allocated [mem 0x21efd5000-0x21effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000994b5fff]
node 0: [mem 0x0000000099db6000-0x000000009f4befff]
node 0: [mem 0x000000009fbff000-0x000000009fbfffff]
node 0: [mem 0x0000000100000000-0x000000021effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
On node 0 totalpages: 1825630
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 10095 pages used for memmap
DMA32 zone: 646080 pages, LIFO batch:31
Normal zone: 18368 pages used for memmap
Normal zone: 1175552 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x994b6000-0x99db5fff]
PM: Registered nosave memory: [mem 0x9f4bf000-0x9f8befff]
PM: Registered nosave memory: [mem 0x9f8bf000-0x9fbbefff]
PM: Registered nosave memory: [mem 0x9fbbf000-0x9fbfefff]
PM: Registered nosave memory: [mem 0x9fc00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf09fffff]
PM: Registered nosave memory: [mem 0xf0a00000-0xf0afffff]
PM: Registered nosave memory: [mem 0xf0b00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xe0000000-0xf09fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffffa0e4dec00000 s108888 r8192 d30376 u524288
pcpu-alloc: s108888 r8192 d30376 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1797082
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.8-300.fc26.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=es_MX.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 7077700K/7302520K available (8688K kernel code, 1668K rwdata, 3604K rodata, 2120K init, 1816K bss, 224820K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:524544 nr_irqs:1000 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2195.917 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.83 BogoMIPS (lpj=2195917)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170119
ACPI: 7 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 31978 entries in 125 pages
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A8-7410 APU with AMD Radeon R5 Graphics (family: 0x16, model: 0x30, stepping: 0x1)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (17564.32 BogoMIPS)
sched_clock: Marking stable (232000000, 0)->(351089916, -119089916)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x9f8bf000-0x9fbbefff] (3145728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 18:22:21, date: 08/23/17
NET: Registered protocol family 16
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x44 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
platform wdat_wdt: failed to claim resource 1: [mem 0xfec000f4-0xfec000f8]
ACPI: watchdog: Device creation failed: -16
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
pci 0000:00:01.0: [1002:9851] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:00:01.0: reg 0x24: [mem 0xf0d00000-0xf0d3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xf0d60000-0xf0d63fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
pci 0000:00:02.1: [1022:1439] type 01 class 0x060400
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.1: System wakeup disabled by ACPI
pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: System wakeup disabled by ACPI
pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xf0d40000-0xf0d5ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xf0b00000-0xf0bfffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xf0d6f000-0xf0d6ffff]
pci 0000:00:08.0: reg 0x24: [mem 0xf0d6a000-0xf0d6bfff]
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xf0d68000-0xf0d69fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f]
pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127]
pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117]
pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123]
pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f]
pci 0000:00:11.0: reg 0x24: [mem 0xf0d6c000-0xf0d6c3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.0: reg 0x10: [mem 0xf0d6e000-0xf0d6e0ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.0: reg 0x10: [mem 0xf0d6d000-0xf0d6d0ff]
pci 0000:00:13.0: supports D1 D2
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf0d64000-0xf0d67fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf0c04000-0xf0c04fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xf0c00000-0xf0c03fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.2: PCI bridge to [bus 02]
pci 0000:00:02.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.2: bridge window [mem 0xf0c00000-0xf0cfffff]
pci 0000:03:00.0: [168c:0042] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf0800000-0xf09fffff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: PCI bridge to [bus 03]
pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf09fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:00:01.0: vgaarb: setting as boot VGA device
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:01.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0x994b6000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9f4bf000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs FUJ7401 PNP0303 (active)
system 00:03: [io 0x0400-0x04cf] has been reserved
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x04d6] has been reserved
system 00:03: [io 0x0c00-0x0c01] has been reserved
system 00:03: [io 0x0c14] has been reserved
system 00:03: [io 0x0c50-0x0c52] has been reserved
system 00:03: [io 0x0c6c] has been reserved
system 00:03: [io 0x0c6f] has been reserved
system 00:03: [io 0x0cd0-0x0cdb] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:04: [mem 0xff800000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:02.1: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:02.1: BAR 14: assigned [mem 0xf0e00000-0xf0ffffff]
pci 0000:00:02.1: BAR 15: assigned [mem 0xf1000000-0xf11fffff 64bit pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0xf0d80000-0xf0d9ffff pref]
pci 0000:00:02.1: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:02.1: bridge window [mem 0xf0e00000-0xf0ffffff]
pci 0000:00:02.1: bridge window [mem 0xf1000000-0xf11fffff 64bit pref]
pci 0000:00:02.2: PCI bridge to [bus 02]
pci 0000:00:02.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.2: bridge window [mem 0xf0c00000-0xf0cfffff]
pci 0000:00:02.3: PCI bridge to [bus 03]
pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf09fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xf0e00000-0xf0ffffff]
pci_bus 0000:01: resource 2 [mem 0xf1000000-0xf11fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf0c00000-0xf0cfffff]
pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf09fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 23252K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9b4bf000-0x9f4bf000] (64MB) mapped at [ffffa0e35b4bf000-ffffa0e35f4befff]
perf: AMD NB counters detected
perf: AMD LLC counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1503512540.872:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
ACPI: AC Adapter [ACAD] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (59 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT1] (battery present)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m1024@0xf0d6c000 port 0xf0d6c100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xf0d6c000 port 0xf0d6c180 irq 19
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.0: EHCI Host Controller
ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.0: debug port 2
ehci-pci 0000:00:12.0: irq 18, io mem 0xf0d6e000
ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.11.8-300.fc26.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:13.0: EHCI Host Controller
ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.0: debug port 2
ehci-pci 0000:00:13.0: irq 18, io mem 0xf0d6d000
ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.11.8-300.fc26.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.11.8-300.fc26.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:00:10.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.11.8-300.fc26.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:00:10.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: CPU0: patch_level=0x07030105
microcode: CPU1: patch_level=0x07030105
microcode: CPU2: patch_level=0x07030105
microcode: CPU3: patch_level=0x07030105
microcode: Microcode Update Driver: v2.2.
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'Fedora kernel signing key: a97d6306ae6a6507bdc5a7857746bd9b5938a8b2'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
Magic number: 13:473:393
rtc_cmos 00:01: setting system clock to 2017-08-23 18:22:21 UTC (1503512541)
PM: Hibernation image not present or could not be loaded.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=0438, idProduct=7900
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=0438, idProduct=7900
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: ATAPI: Slimtype DVD A DA8A6SH, GA11, max UDMA/133
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM Slimtype DVD A DA8A6SH GA11 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 2120K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1536K
Freeing unused kernel memory: 492K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Timers.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
audit: type=1130 audit(1503512542.111:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503512542.117:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 1-1.2: new full-speed USB device number 3 using ehci-pci
usb 2-1.1: new full-speed USB device number 3 using ehci-pci
audit: type=1130 audit(1503512542.227:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 1-1.2: New USB device found, idVendor=06cb, idProduct=2970
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product:
usb 1-1.2: Manufacturer:
usb 2-1.1: New USB device found, idVendor=04ca, idProduct=3015
usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
audit: type=1130 audit(1503512542.315:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1503512542.315:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503512542.326:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 2-1.2: new high-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 2195.881 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa6ffc1640, max_idle_ns: 440795239502 ns
audit: type=1130 audit(1503512542.378:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503512542.391:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
input: Touchpad as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:06CB:2970.0001/input/input6
hid-multitouch 0003:06CB:2970.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [ ] on usb-0000:00:12.0-1.2/input0
usb 2-1.2: New USB device found, idVendor=1bcf, idProduct=2c81
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2: Product: HD WebCam
usb 2-1.2: Manufacturer: NC2141103M51100DB0LM05
usb 1-1.4: new high-speed USB device number 4 using ehci-pci
usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0129
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: USB2.0-CRW
usb 1-1.4: Manufacturer: Generic
usb 1-1.4: SerialNumber: 20100201396000000
audit: type=1130 audit(1503512542.543:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0xffffbb2dc0ded000, 2c:60:0c:81:49:17, XID 14100800 IRQ 33
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usbcore: registered new interface driver rtsx_usb
r8169 0000:02:00.0 enp2s0: renamed from eth0
random: fast init done
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
Found CRAT image with size=936
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=4 id_base=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=1
Found cache entry in CRAT table with processor_id=1
Found cache entry in CRAT table with processor_id=1
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=3
Found cache entry in CRAT table with processor_id=3
Found cache entry in CRAT table with processor_id=3
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
[drm] initializing kernel modesetting (MULLINS 0x1002:0x9851 0x1025:0x0960 0x45).
[drm] register mmio base: 0xF0D00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: AMD
radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 3552566 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading mullins Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] Found UVD firmware Version: 1.64 Family ID: 9
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffffa0e4d0b88c00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffffa0e4d0b88c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffffa0e4d0b88c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffffa0e4d0b88c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffffa0e4d0b88c10
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0xffffbb2dc1838d30
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffffa0e4d0b88c18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffffa0e4d0b88c1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 12 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
clocksource: Switched to clocksource tsc
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] eDP-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] fb mappable at 0xE0722000
[drm] vram apper at 0xE0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.49.0 20080528 for 0000:00:01.0 on minor 0
random: crng init done
kauditd_printk_skb: 1 callbacks suppressed
audit: type=1130 audit(1503512546.833:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503512547.027:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1503512547.213:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1503512547.213:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503512547.375:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1503512547.385:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503512547.390:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1503512547.390:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503512547.391:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1503512547.391:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[204]: Received SIGTERM from PID 1 (systemd).
systemd: 15 output lines suppressed due to ratelimiting
SELinux: 32768 avtab hash slots, 107409 rules.
SELinux: 32768 avtab hash slots, 107409 rules.
SELinux: 8 users, 14 roles, 5094 types, 312 bools, 1 sens, 1024 cats
SELinux: 94 classes, 107409 rules
SELinux: Class sctp_socket not defined in policy.
SELinux: Class icmp_socket not defined in policy.
SELinux: Class ax25_socket not defined in policy.
SELinux: Class ipx_socket not defined in policy.
SELinux: Class netrom_socket not defined in policy.
SELinux: Class atmpvc_socket not defined in policy.
SELinux: Class x25_socket not defined in policy.
SELinux: Class rose_socket not defined in policy.
SELinux: Class decnet_socket not defined in policy.
SELinux: Class atmsvc_socket not defined in policy.
SELinux: Class rds_socket not defined in policy.
SELinux: Class irda_socket not defined in policy.
SELinux: Class pppox_socket not defined in policy.
SELinux: Class llc_socket not defined in policy.
SELinux: Class can_socket not defined in policy.
SELinux: Class tipc_socket not defined in policy.
SELinux: Class bluetooth_socket not defined in policy.
SELinux: Class iucv_socket not defined in policy.
SELinux: Class rxrpc_socket not defined in policy.
SELinux: Class isdn_socket not defined in policy.
SELinux: Class phonet_socket not defined in policy.
SELinux: Class ieee802154_socket not defined in policy.
SELinux: Class caif_socket not defined in policy.
SELinux: Class alg_socket not defined in policy.
SELinux: Class nfc_socket not defined in policy.
SELinux: Class vsock_socket not defined in policy.
SELinux: Class kcm_socket not defined in policy.
SELinux: Class qipcrtr_socket not defined in policy.
SELinux: Class smc_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
systemd[1]: Successfully loaded SELinux policy in 277.163ms.
systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time.
systemd[1]: Relabelled /dev and /run in 39.844ms.
EXT4-fs (dm-0): re-mounted. Opts: (null)
systemd-journald[554]: Received request to flush runtime journal from PID 1
kauditd_printk_skb: 32 callbacks suppressed
audit: type=1130 audit(1503530551.881:54): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503530552.129:55): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503530552.495:56): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1503530552.495:57): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503530552.534:58): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503530552.735:59): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503530553.142:60): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=fedora-readonly comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503530553.583:61): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503530553.615:62): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
acpi_cpufreq: overriding BIOS provided _PSD data
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
ccp 0000:00:08.0: 4 command queues available
ccp 0000:00:08.0: enabled
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMBS.SMB0) (20170119/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x42
sp5100_tco: Using 0xfeb00000 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffbb2dc0e2d000). heartbeat=60 sec (nowayout=0)
audit: type=1130 audit(1503530554.808:63): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-backlight@backlight:radeon_bl0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
ath10k_pci 0000:03:00.0: qca9377 hw1.0 target 0x05020000 chip_id 0x003820ff sub 11ad:1806
ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 0 testmode 0
ath10k_pci 0000:03:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 93da0176
media: Linux media interface: v0.10
Linux video capture interface: v2.00
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x1
input: Acer WMI hotkeys as /devices/virtual/input/input13
input: Acer BMA150 accelerometer as /devices/virtual/input/input14
uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c81)
uvcvideo 2-1.2:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 2-1.2:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 2-1.2:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 2-1.2:1.0: Entity type for entity Camera 1 was not initialized!
input: HD WebCam as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input15
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input16
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
usb 2-1.1: USB disconnect, device number 3
EDAC MC: Ver: 3.0.0
usb 2-1.1: new full-speed USB device number 5 using ehci-pci
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
usb 2-1.1: New USB device found, idVendor=04ca, idProduct=3015
usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x12
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
Adding 7237628k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:7237628k FS
kauditd_printk_skb: 1 callbacks suppressed
audit: type=1130 audit(1503530557.846:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
ath10k_pci 0000:03:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
ath: EEPROM regdomain: 0x69
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x69
ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
audit: type=1130 audit(1503530558.450:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503530559.146:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1503530559.146:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503530560.412:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503530560.718:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@8:5 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503530560.976:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-fedora\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1503530561.266:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503530561.409:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)!
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
tun: Universal TUN/TAP device driver, 1.6
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)!
ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)!
fuse init (API version 7.26)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)!
ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)!
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 04:bd:88:4f:8f:13
wlp3s0: send auth to 04:bd:88:4f:8f:13 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 04:bd:88:4f:8f:13 (try 1/3)
wlp3s0: RX AssocResp from 04:bd:88:4f:8f:13 (capab=0x1 status=0 aid=4)
wlp3s0: associated
wlp3s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 04:bd:88:4f:8f:13
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
ath: EEPROM regdomain: 0x81e4
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x10
ath: Country alpha2 being used: MX
ath: Regpair used: 0x10
ath: regdomain 0x81e4 dynamically updated by country IE
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
wlp3s0: deauthenticating from 04:bd:88:4f:8f:13 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
ACPI : EC: event blocked
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 958.830 msecs
PM: suspend devices took 0.959 seconds
PM: late suspend of devices complete after 1.014 msecs
ACPI : EC: interrupt blocked
pcieport 0000:00:02.2: System wakeup enabled by ACPI
ehci-pci 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 24.938 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
LVT offset 0 assigned for vector 0x400
Suspended for 557.000 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
microcode: CPU1: patch_level=0x07030105
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
microcode: CPU2: patch_level=0x07030105
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
microcode: CPU3: patch_level=0x07030105
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI : EC: interrupt unblocked
ehci-pci 0000:00:12.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 27.817 msecs
PM: early resume of devices complete after 0.391 msecs
ACPI : EC: event unblocked
pcieport 0000:00:02.2: System wakeup disabled by ACPI
rtc_cmos 00:01: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffffa0e4d0b88c00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffffa0e4d0b88c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffffa0e4d0b88c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffffa0e4d0b88c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffffa0e4d0b88c10
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0xffffbb2dc1838d30
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffffa0e4d0b88c18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffffa0e4d0b88c1c
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
r8169 0000:02:00.0 enp2s0: link down
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 6 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
usb 1-1.2: reset full-speed USB device number 3 using ehci-pci
usb 2-1.1: reset full-speed USB device number 5 using ehci-pci
usb 2-1.2: reset high-speed USB device number 4 using ehci-pci
usb 1-1.4: reset high-speed USB device number 4 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/133
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
PM: resume of devices complete after 2408.044 msecs
usb 2-1.1:1.0: rebind failed: -517
usb 2-1.1:1.1: rebind failed: -517
PM: resume devices took 2.409 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)!
ath10k_pci 0000:03:00.0: no channel configured; ignoring frame(s)!
wlp3s0: authenticate with 04:bd:88:4f:81:13
wlp3s0: send auth to 04:bd:88:4f:81:13 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 04:bd:88:4f:81:13 (try 1/3)
wlp3s0: RX AssocResp from 04:bd:88:4f:81:13 (capab=0x1 status=0 aid=7)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
ath: EEPROM regdomain: 0x81e4
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x10
ath: Country alpha2 being used: MX
ath: Regpair used: 0x10
ath: regdomain 0x81e4 dynamically updated by country IE
wlp3s0: Limiting TX power to 36 (36 - 0) dBm as advertised by 04:bd:88:4f:81:13