dmesg - mint_nx6310_new_bios
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-32-generic (buildd@lgw01-24) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #37~14.04.1-Ubuntu SMP Thu Oct 22 09:37:25 UTC 2015 (Ubuntu 3.19.0-32.37~14.04.1-generic 3.19.8-ckt7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f7cffff] usable
BIOS-e820: [mem 0x000000007f7d0000-0x000000007f7e55ff] reserved
BIOS-e820: [mem 0x000000007f7e5600-0x000000007f7f7fff] ACPI NVS
BIOS-e820: [mem 0x000000007f7f8000-0x000000007f7fffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9afff] reserved
BIOS-e820: [mem 0x00000000feda0000-0x00000000fedbffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Hewlett-Packard HP Compaq nx6310 (EY589ES#AKR)/30AA, BIOS 68YDU Ver. F.0E 02/21/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7f7d0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base F7F800000 mask FFF800000 uncachable
2 base 0FEDA0000 mask FFFFE0000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 63480MB, range: 8MB, type UC
reg 2, base: 4175488KB, range: 128KB, type UC
total RAM covered: 2048M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 1 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x021fffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x20000000-0x377fffff]
[mem 0x20000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01c2c000, 0x01c2cfff] PGTABLE
BRK [0x01c2d000, 0x01c2dfff] PGTABLE
RAMDISK: [mem 0x34522000-0x36288fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000F7C30 000024 (v02 HP )
ACPI: XSDT 0x7F7E57C4 000074 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: FACP 0x7F7E5684 0000F4 (v04 HP 30AA 00000003 HP 00000001)
ACPI: DSDT 0x7F7E5AC0 00FBEB (v01 HP nc6340 00010000 MSFT 0100000E)
ACPI: FACS 0x7F7F7E80 000040
ACPI: FACS 0x7F7F7E80 000040
ACPI: SLIC 0x7F7E5838 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: HPET 0x7F7E59B0 000038 (v01 HP 30AA 00000001 HP 00000001)
ACPI: APIC 0x7F7E59E8 000068 (v01 HP 30AA 00000001 HP 00000001)
ACPI: MCFG 0x7F7E5A50 00003C (v01 HP 30AA 00000001 HP 00000001)
ACPI: TCPA 0x7F7E5A8C 000032 (v02 HP 30AA 00000001 HP 00000001)
ACPI: SSDT 0x7F7F56AB 000326 (v01 HP HPQSAT 00000001 MSFT 0100000E)
ACPI: SSDT 0x7F7F59D1 0004CB (v01 HP Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 0x7F7F5E9C 00025F (v01 HP Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 0x7F7F60FB 0004D7 (v01 HP CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
1147MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x7f7cffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x7f7cffff]
Initmem setup node 0 [mem 0x00001000-0x7f7cffff]
On node 0 totalpages: 522094
DMA zone: 40 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 2190 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 293842 pages, LIFO batch:31
Using APIC driver default
Reserving Intel graphics stolen memory at 0x7f800000-0x7fffffff
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 1 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0x80000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 17 pages/cpu @f67b5000 s39360 r0 d30272 u69632
pcpu-alloc: s39360 r0 d30272 u69632 alloc=17*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519864
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00037bfe:0007f7d0)
Initializing Movable for node 0 (00000000:00000000)
Memory: 2024152K/2088376K available (6951K kernel code, 670K rwdata, 3004K rodata, 932K init, 788K bss, 64224K reserved, 0K cma-reserved, 1175368K highmem)
virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1a64000 - 0xc1b4d000 ( 932 kB)
.data : 0xc16ca0d0 - 0xc1a62b40 (3682 kB)
.text : 0xc1000000 - 0xc16ca0d0 (6952 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:2304 nr_irqs:440 16
CPU 0 irqstacks, hard=f4036000 soft=f4038000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1728.932 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.86 BogoMIPS (lpj=6915728)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Disabled fast string operations
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
ftrace: allocating 29331 entries in 58 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz (fam: 06, model: 0e, stepping: 08)
Performance Events: Core events, core PMU driver.
... version: 1
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 0
... event mask: 0000000000000003
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (3457.86 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
PM: Registering ACPI NVS region [mem 0x7f7e5600-0x7f7f7fff] (76288 bytes)
reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
pinctrl core: initialized pinctrl subsystem
RTC time: 15:07:02, date: 08/22/17
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: Power Resource [C1F0] (on)
ACPI: Power Resource [C1FD] (on)
ACPI: Power Resource [C21A] (on)
ACPI: Power Resource [C222] (off)
ACPI: Power Resource [C321] (off)
ACPI: Power Resource [C322] (off)
ACPI: Power Resource [C323] (off)
ACPI: Power Resource [C324] (off)
ACPI: PCI Root Bridge [C002] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x7f800000-0xfedfffff]
pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe8400000-0xe847ffff]
pci 0000:00:02.0: reg 0x14: [io 0x6000-0x6007]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0xe8480000-0xe84bffff]
pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xe8500000-0xe857ffff]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe8580000-0xe8583fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x6020-0x603f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x6040-0x605f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x6060-0x607f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x6080-0x609f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xe8584000-0xe85843ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x1000-0x107f]: address conflict with ACPI CPU throttle [io 0x1010-0x1015]
pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (mask 0007)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io 0x60a0-0x60af]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x13f0-0x13f7]
pci 0000:00:1f.2: reg 0x14: [io 0x15f4-0x15f7]
pci 0000:00:1f.2: reg 0x18: [io 0x1370-0x1377]
pci 0000:00:1f.2: reg 0x1c: [io 0x1574-0x1577]
pci 0000:00:1f.2: reg 0x20: [io 0x60d0-0x60df]
pci 0000:00:1f.2: reg 0x24: [mem 0xe8585000-0xe85853ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:08:00.0: [14e4:4311] type 00 class 0x028000
pci 0000:08:00.0: reg 0x10: [mem 0xe8000000-0xe8003fff]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:00:1c.0: bridge window [mem 0xe8000000-0xe80fffff]
acpiphp: Slot [1] registered
pci 0000:00:1c.2: PCI bridge to [bus 18]
pci 0000:00:1c.2: bridge window [io 0x4000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe7ffffff]
acpiphp: Slot [1-1] registered
pci 0000:00:1c.3: PCI bridge to [bus 20]
pci 0000:00:1c.3: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:02:06.0: [104c:8039] type 02 class 0x060700
pci 0000:02:06.0: reg 0x10: [mem 0xe8100000-0xe8100fff]
pci 0000:02:06.0: supports D1 D2
pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:06.1: [104c:803a] type 00 class 0x0c0010
pci 0000:02:06.1: reg 0x10: [mem 0xe8101000-0xe81017ff]
pci 0000:02:06.1: reg 0x14: [mem 0xe8104000-0xe8107fff]
pci 0000:02:06.1: supports D1 D2
pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot
pci 0000:02:0e.0: [14e4:170c] type 00 class 0x020000
pci 0000:02:0e.0: reg 0x10: [mem 0xe8108000-0xe8109fff]
pci 0000:02:0e.0: supports D1 D2
pci 0000:02:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe8100000-0xe83fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x7f800000-0xfedfffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-03] (conflicts with (null) [bus 02-03])
pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06
pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02-03] (conflicts with (null) [bus 02-03])
pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
pci 0000:00:1e.0: bridge has subordinate 03 but max busn 06
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [C10E] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C10F] (IRQs *10 11)
ACPI: PCI Interrupt Link [C110] (IRQs *10 11)
ACPI: PCI Interrupt Link [C111] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12A] (IRQs *10 11)
ACPI: PCI Interrupt Link [C12B] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C12C] (IRQs 10 11) *0, disabled.
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20141107/pci_link-178)
ACPI: Enabled 5 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f7d0000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x7f7fffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs SYN0112 SYN0100 SYN0002 PNP0f13 (active)
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x0800-0x080f] has been reserved
system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [io 0x1000-0x107f] could not be reserved
system 00:05: [io 0x1100-0x113f] has been reserved
system 00:05: [io 0x1200-0x121f] has been reserved
system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:05: [mem 0xfec00000-0xfec000ff] could not be reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed9afff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfeda0000-0xfedbffff] has been reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 18] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000
pci 0000:02:06.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:02:06.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000
pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x7000-0x7fff]
pci 0000:00:1e.0: BAR 13: assigned [io 0x8000-0x8fff]
pci 0000:00:1c.0: PCI bridge to [bus 08]
pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.0: bridge window [mem 0xe8000000-0xe80fffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 18]
pci 0000:00:1c.2: bridge window [io 0x4000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe7ffffff]
pci 0000:00:1c.2: bridge window [mem 0x80200000-0x803fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 20]
pci 0000:00:1c.3: bridge window [io 0x2000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe3ffffff]
pci 0000:00:1c.3: bridge window [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:02:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
pci 0000:02:06.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
pci 0000:02:06.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:02:06.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
pci 0000:02:06.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
pci 0000:02:06.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
pci 0000:02:06.0: BAR 13: assigned [io 0x8000-0x80ff]
pci 0000:02:06.0: BAR 14: assigned [io 0x8400-0x84ff]
pci 0000:02:06.0: CardBus bridge to [bus 03-06]
pci 0000:02:06.0: bridge window [io 0x8000-0x80ff]
pci 0000:02:06.0: bridge window [io 0x8400-0x84ff]
pci 0000:02:06.0: bridge window [mem 0x84000000-0x87ffffff pref]
pci 0000:02:06.0: bridge window [mem 0x88000000-0x8bffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02-03]
pci 0000:00:1e.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:1e.0: bridge window [mem 0xe8100000-0xe83fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x7f800000-0xfedfffff]
pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff]
pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff]
pci_bus 0000:08: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:08: resource 1 [mem 0xe8000000-0xe80fffff]
pci_bus 0000:08: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:18: resource 0 [io 0x4000-0x5fff]
pci_bus 0000:18: resource 1 [mem 0xe4000000-0xe7ffffff]
pci_bus 0000:18: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
pci_bus 0000:20: resource 0 [io 0x2000-0x3fff]
pci_bus 0000:20: resource 1 [mem 0xe0000000-0xe3ffffff]
pci_bus 0000:20: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:02: resource 1 [mem 0xe8100000-0xe83fffff]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 7 [mem 0x7f800000-0xfedfffff]
pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff]
pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 0 [io 0x8000-0x80ff]
pci_bus 0000:03: resource 1 [io 0x8400-0x84ff]
pci_bus 0000:03: resource 2 [mem 0x84000000-0x87ffffff pref]
pci_bus 0000:03: resource 3 [mem 0x88000000-0x8bffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30108K (f4522000 - f6289000)
microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1503414423.128:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xf8480000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 14
ACPI: AC Adapter [C1BA] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [C23F]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [C238]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (51 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ1] (50 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [TZ2] (41 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [TZ3] (28 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [TZ4] (72 C)
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0xe8584000
ata2: port disabled--ignoring
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006020
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006040
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006060
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006080
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.19.0-32-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:C217,PNP0f13:C218] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 6727a22571c7546e4be91b5c8a96c4bc8c7cc61d'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 13:321:134
acpi device:09: hash matches
rtc_cmos 00:01: setting system clock to 2017-08-22 15:07:04 UTC (1503414424)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata1.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, HH15, max MWDMA2
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
isapnp: No Plug & Play device found
ata1.00: configured for MWDMA2
ACPI: Battery Slot [C1BC] (battery present)
ACPI: Battery Slot [C1BB] (battery absent)
scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D HH15 PQ: 0 ANSI: 5
sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 932K (c1a64000 - c1b4d000)
Write protecting the kernel text: 6956k
Write protecting the kernel read-only data: 3008k
NX-protecting the kernel data: 5332k
systemd-udevd[101]: starting version 204
[Firmware Bug]: _BCQ is used instead of _BQC
ACPI: Video Device [C083] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:02: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: quirky BIOS, skipping spindown on poweroff
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
ssb: Found chip with id 0x4311, rev 0x01 and package 0x00
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata3: SATA max UDMA/133 abar m1024@0xe8585000 port 0xe8585100 irq 27
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ssb: Sonics Silicon Backplane found on PCI device 0000:08:00.0
firewire_ohci 0000:02:06.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[drm] Memory usable by graphics device = 256M
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
ssb: Found chip with id 0x4401, rev 0x02 and package 0x00
ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:17:08:46:ac:83
psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0, board id: 0, fw id: 240405
psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[drm] initialized overlay support
[drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: ATA-7: FUJITSU MHV2060BH PL, 892C, max UDMA/100
ata3.00: 117231408 sectors, multi 16: LBA48
ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA FUJITSU MHV2060B 892C PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg1 type 0
firewire_core 0000:02:06.1: created device fw0: GUID 00023f9929e1490c, S400
sda: sda1 sda2 < sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 126 bits of entropy available
random: nonblocking pool is initialized
usb 3-2: new full-speed USB device number 2 using uhci_hcd
usb 3-2: New USB device found, idVendor=1ea7, idProduct=0064
usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-2: Product: 2.4G Mouse
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-udevd[353]: starting version 204
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: FWH not detected
ACPI Warning: SystemIO range 0x00001028-0x0000102f conflicts with OpRegion 0x00001000-0x00001042 (\_SB_.C002.C003.C0BA) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00001130-0x0000113f conflicts with OpRegion 0x00001100-0x0000113b (\_SB_.C002.C003.C0CC) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00001100-0x0000112f conflicts with OpRegion 0x00001100-0x0000113b (\_SB_.C002.C003.C0CC) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
cfg80211: Calling CRDA to update world regulatory domain
leds_ss4200: no LED devices found
yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30aa]
yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:06.0: TI: mfunc 0x01a61b22, devctl 0x64
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18
yenta_cardbus 0000:02:06.0: Socket status: 30000820
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io 0x8000-0x8fff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x8000-0x8fff:
excluding 0x8000-0x80ff 0x8400-0x84ff
device-mapper: multipath: version 1.7.0 loaded
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xe8100000-0xe83fffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8100000-0xe83fffff:
excluding 0xe8100000-0xe812ffff
b43-phy0: Broadcom 4311 WLAN found (core revision 10)
b43-phy0: Found PHY: Analog 4, Type 2 (G), Revision 8
b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 2, Version 0
Broadcom 43xx driver loaded [ Features: PNL ]
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
init: cups main process (541) killed by HUP signal
init: cups main process ended, respawning
systemd-hostnamed[562]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
sound hdaudioC0D0: autoconfig: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x6/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Mic=0x8
sound hdaudioC0D0: Internal Mic=0x18
sound hdaudioC0D0: Line=0x9
pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
pci 0000:03:00.0: [1033:0035] type 00 class 0x0c0310
pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:00.1: [1033:0035] type 00 class 0x0c0310
pci 0000:03:00.1: reg 0x10: [mem 0x00000000-0x00000fff]
pci 0000:03:00.1: supports D1 D2
pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot
pci 0000:03:00.2: [1033:00e0] type 00 class 0x0c0320
pci 0000:03:00.2: reg 0x10: [mem 0x00000000-0x000000ff]
pci 0000:03:00.2: supports D1 D2
pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot
pci 0000:03:00.3: [104c:8023] type 00 class 0x0c0010
pci 0000:03:00.3: reg 0x10: [mem 0x00000000-0x000007ff]
pci 0000:03:00.3: reg 0x14: [mem 0x00000000-0x00003fff]
pci 0000:03:00.3: supports D1 D2
pci 0000:03:00.3: PME# supported from D0 D1 D2 D3hot
pci 0000:03:00.3: BAR 1: assigned [mem 0x88000000-0x88003fff]
pci 0000:03:00.0: BAR 0: assigned [mem 0x88004000-0x88004fff]
pci 0000:03:00.1: BAR 0: assigned [mem 0x88005000-0x88005fff]
pci 0000:03:00.3: BAR 0: assigned [mem 0x88006000-0x880067ff]
pci 0000:03:00.2: BAR 0: assigned [mem 0x88006800-0x880068ff]
pci 0000:03:00.0: enabling device (0000 -> 0002)
ohci-pci 0000:03:00.0: OHCI PCI host controller
ohci-pci 0000:03:00.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:03:00.0: irq 18, io mem 0x88004000
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.19.0-32-generic ohci_hcd
usb usb6: SerialNumber: 0000:03:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
pci 0000:03:00.1: enabling device (0000 -> 0002)
ohci-pci 0000:03:00.1: OHCI PCI host controller
ohci-pci 0000:03:00.1: new USB bus registered, assigned bus number 7
ohci-pci 0000:03:00.1: irq 18, io mem 0x88005000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.19.0-32-generic ohci_hcd
usb usb7: SerialNumber: 0000:03:00.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
pci 0000:03:00.2: enabling device (0000 -> 0002)
ehci-pci 0000:03:00.2: EHCI Host Controller
ehci-pci 0000:03:00.2: new USB bus registered, assigned bus number 8
ehci-pci 0000:03:00.2: irq 18, io mem 0x88006800
ehci-pci 0000:03:00.2: USB 2.0 started, EHCI 1.00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
usb usb8: SerialNumber: 0000:03:00.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 3 ports detected
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
firewire_ohci 0000:03:00.3: enabling device (0000 -> 0002)
firewire_ohci 0000:03:00.3: added OHCI v1.10 device as card 1, 4 IR + 8 IT contexts, quirks 0x2
init: failsafe main process (663) killed by TERM signal
firewire_core 0000:03:00.3: created device fw1: GUID 00000000000010ea, S400
input: HP WMI hotkeys as /devices/virtual/input/input17
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
excluding 0x3f0-0x3f7 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xcffff 0xe0000-0xfffff
pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
clean.
pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
input: 2.4G Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:1EA7:0064.0001/input/input18
hid-generic 0003:1EA7:0064.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:1d.1-2/input0
clean.
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: samba-ad-dc main process (1056) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
wlan0: authenticate with 90:94:e4:b1:f1:d8
wlan0: send auth to 90:94:e4:b1:f1:d8 (try 1/3)
wlan0: send auth to 90:94:e4:b1:f1:d8 (try 2/3)
wlan0: send auth to 90:94:e4:b1:f1:d8 (try 3/3)
b44 ssb1:0 eth0: Link is up at 100 Mbps, full duplex
b44 ssb1:0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
wlan0: authentication with 90:94:e4:b1:f1:d8 timed out
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 1 processor cores
vboxdrv: TSC mode is Synchronous, tentative frequency 1729000254 Hz
vboxdrv: Successfully loaded version 5.0.2 (interface 0x00230003)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
b43-phy0: Radio hardware status changed to DISABLED
init: plymouth-stop pre-start process (1755) terminated with status 1
usb 8-1: new high-speed USB device number 2 using ehci-pci
usb 8-1: New USB device found, idVendor=1307, idProduct=0165
usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-1: Product: USB Mass Storage Device
usb 8-1: Manufacturer: USBest Technology
usb 8-1: SerialNumber: 09020354f08002
usb-storage 8-1:1.0: USB Mass Storage device detected
scsi host6: usb-storage 8-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access 0.00 PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 2007040 512-byte logical blocks: (1.02 GB/980 MiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
perf interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000