dmesg - 2017-08-18
calling check_cpu_stall_init+0x0/0x1b @ 1
initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs
calling rcu_register_oom_notifier+0x0/0x14 @ 1
initcall rcu_register_oom_notifier+0x0/0x14 returned 0 after 0 usecs
calling rcu_spawn_gp_kthread+0x0/0x136 @ 1
initcall rcu_spawn_gp_kthread+0x0/0x136 returned 0 after 34 usecs
calling cpu_stop_init+0x0/0x9e @ 1
initcall cpu_stop_init+0x0/0x9e returned 0 after 13 usecs
calling init_events+0x0/0x49 @ 1
initcall init_events+0x0/0x49 returned 0 after 12 usecs
calling init_trace_printk+0x0/0x12 @ 1
initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
calling event_trace_enable_again+0x0/0x44 @ 1
initcall event_trace_enable_again+0x0/0x44 returned 0 after 0 usecs
calling dynamic_debug_init+0x0/0x26b @ 1
initcall dynamic_debug_init+0x0/0x26b returned 0 after 221 usecs
calling rand_initialize+0x0/0x100 @ 1
initcall rand_initialize+0x0/0x100 returned 0 after 0 usecs
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (27200.60 BogoMIPS)
sched_clock: Marking stable (86000000, 0)->(109766782, -23766782)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
calling ipc_ns_init+0x0/0x3f @ 1
initcall ipc_ns_init+0x0/0x3f returned 0 after 0 usecs
calling init_mmap_min_addr+0x0/0x11 @ 1
initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs
calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 3 usecs
calling net_ns_init+0x0/0x134 @ 1
initcall net_ns_init+0x0/0x134 returned 0 after 23 usecs
calling e820__register_nvs_regions+0x0/0x38 @ 1
initcall e820__register_nvs_regions+0x0/0x38 returned 0 after 0 usecs
calling cpufreq_register_tsc_scaling+0x0/0x32 @ 1
initcall cpufreq_register_tsc_scaling+0x0/0x32 returned 0 after 0 usecs
calling init_cpu_syscore+0x0/0x14 @ 1
initcall init_cpu_syscore+0x0/0x14 returned 0 after 0 usecs
calling reboot_init+0x0/0x37 @ 1
initcall reboot_init+0x0/0x37 returned 0 after 2 usecs
calling init_lapic_sysfs+0x0/0x24 @ 1
initcall init_lapic_sysfs+0x0/0x24 returned 0 after 0 usecs
calling wq_sysfs_init+0x0/0x2b @ 1
initcall wq_sysfs_init+0x0/0x2b returned 0 after 11 usecs
calling ksysfs_init+0x0/0x97 @ 1
initcall ksysfs_init+0x0/0x97 returned 0 after 3 usecs
calling pm_init+0x0/0x5a @ 1
initcall pm_init+0x0/0x5a returned 0 after 20 usecs
calling rcu_set_runtime_mode+0x0/0xd @ 1
initcall rcu_set_runtime_mode+0x0/0xd returned 0 after 0 usecs
calling init_jiffies_clocksource+0x0/0x19 @ 1
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
initcall init_jiffies_clocksource+0x0/0x19 returned 0 after 2 usecs
calling futex_init+0x0/0xcb @ 1
futex hash table entries: 2048 (order: 5, 131072 bytes)
initcall futex_init+0x0/0xcb returned 0 after 25 usecs
calling cgroup_wq_init+0x0/0x2e @ 1
initcall cgroup_wq_init+0x0/0x2e returned 0 after 10 usecs
calling cgroup1_wq_init+0x0/0x2e @ 1
initcall cgroup1_wq_init+0x0/0x2e returned 0 after 8 usecs
calling init_wakeup_tracer+0x0/0x32 @ 1
initcall init_wakeup_tracer+0x0/0x32 returned 0 after 1 usecs
calling init_per_zone_wmark_min+0x0/0x75 @ 1
initcall init_per_zone_wmark_min+0x0/0x75 returned 0 after 3 usecs
calling init_zero_pfn+0x0/0x33 @ 1
initcall init_zero_pfn+0x0/0x33 returned 0 after 0 usecs
calling fsnotify_init+0x0/0x49 @ 1
initcall fsnotify_init+0x0/0x49 returned 0 after 3 usecs
calling filelock_init+0x0/0x95 @ 1
initcall filelock_init+0x0/0x95 returned 0 after 3 usecs
calling init_misc_binfmt+0x0/0x2d @ 1
initcall init_misc_binfmt+0x0/0x2d returned 0 after 0 usecs
calling init_script_binfmt+0x0/0x16 @ 1
initcall init_script_binfmt+0x0/0x16 returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0x16 @ 1
initcall init_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
calling init_compat_elf_binfmt+0x0/0x16 @ 1
initcall init_compat_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
calling configfs_init+0x0/0x94 @ 1
initcall configfs_init+0x0/0x94 returned 0 after 2 usecs
calling debugfs_init+0x0/0x50 @ 1
initcall debugfs_init+0x0/0x50 returned 0 after 1 usecs
calling tracefs_init+0x0/0x3b @ 1
initcall tracefs_init+0x0/0x3b returned 0 after 1 usecs
calling securityfs_init+0x0/0x66 @ 1
initcall securityfs_init+0x0/0x66 returned 0 after 14 usecs
calling calibrate_xor_blocks+0x0/0x125 @ 1
xor: automatically using best checksumming function avx
initcall calibrate_xor_blocks+0x0/0x125 returned 0 after 1 usecs
calling prandom_init+0x0/0xc5 @ 1
initcall prandom_init+0x0/0xc5 returned 0 after 6 usecs
calling pinctrl_init+0x0/0xae @ 1
pinctrl core: initialized pinctrl subsystem
initcall pinctrl_init+0x0/0xae returned 0 after 9 usecs
calling virtio_init+0x0/0x30 @ 1
initcall virtio_init+0x0/0x30 returned 0 after 5 usecs
calling iommu_init+0x0/0x2b @ 1
initcall iommu_init+0x0/0x2b returned 0 after 1 usecs
calling cpufreq_core_init+0x0/0x4c @ 1
initcall cpufreq_core_init+0x0/0x4c returned 0 after 1 usecs
calling cpuidle_init+0x0/0x3b @ 1
initcall cpuidle_init+0x0/0x3b returned 0 after 2 usecs
calling capsule_reboot_register+0x0/0x12 @ 1
initcall capsule_reboot_register+0x0/0x12 returned 0 after 0 usecs
calling sock_init+0x0/0x9a @ 1
initcall sock_init+0x0/0x9a returned 0 after 1414 usecs
calling net_inuse_init+0x0/0x24 @ 1
initcall net_inuse_init+0x0/0x24 returned 0 after 1 usecs
calling net_defaults_init+0x0/0x24 @ 1
initcall net_defaults_init+0x0/0x24 returned 0 after 0 usecs
calling init_default_flow_dissectors+0x0/0x50 @ 1
initcall init_default_flow_dissectors+0x0/0x50 returned 0 after 0 usecs
calling netpoll_init+0x0/0x23 @ 1
initcall netpoll_init+0x0/0x23 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x16e @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x16e returned 0 after 34 usecs
calling irq_sysfs_init+0x0/0x96 @ 1
initcall irq_sysfs_init+0x0/0x96 returned 0 after 64 usecs
calling bdi_class_init+0x0/0x49 @ 1
initcall bdi_class_init+0x0/0x49 returned 0 after 4 usecs
calling mm_sysfs_init+0x0/0x29 @ 1
initcall mm_sysfs_init+0x0/0x29 returned 0 after 0 usecs
calling kobject_uevent_init+0x0/0x12 @ 1
initcall kobject_uevent_init+0x0/0x12 returned 0 after 1 usecs
calling pcibus_class_init+0x0/0x19 @ 1
initcall pcibus_class_init+0x0/0x19 returned 0 after 2 usecs
calling pci_driver_init+0x0/0x12 @ 1
initcall pci_driver_init+0x0/0x12 returned 0 after 5 usecs
calling backlight_class_init+0x0/0xa7 @ 1
initcall backlight_class_init+0x0/0xa7 returned 0 after 2 usecs
calling tty_class_init+0x0/0x34 @ 1
initcall tty_class_init+0x0/0x34 returned 0 after 1 usecs
calling vtconsole_class_init+0x0/0xde @ 1
initcall vtconsole_class_init+0x0/0xde returned 0 after 13 usecs
calling iommu_dev_init+0x0/0x19 @ 1
initcall iommu_dev_init+0x0/0x19 returned 0 after 2 usecs
calling register_node_type+0x0/0x2f @ 1
initcall register_node_type+0x0/0x2f returned 0 after 11 usecs
calling regmap_initcall+0x0/0xd @ 1
initcall regmap_initcall+0x0/0xd returned 0 after 1 usecs
calling mipi_dsi_bus_init+0x0/0x12 @ 1
initcall mipi_dsi_bus_init+0x0/0x12 returned 0 after 4 usecs
calling spi_init+0x0/0x97 @ 1
initcall spi_init+0x0/0x97 returned 0 after 6 usecs
calling i2c_init+0x0/0x89 @ 1
initcall i2c_init+0x0/0x89 returned 0 after 9 usecs
calling init_ladder+0x0/0x25 @ 1
cpuidle: using governor ladder
initcall init_ladder+0x0/0x25 returned 0 after 28 usecs
calling init_menu+0x0/0x12 @ 1
cpuidle: using governor menu
initcall init_menu+0x0/0x12 returned 0 after 22 usecs
calling pcc_init+0x0/0x94 @ 1
PCCT header not found.
initcall pcc_init+0x0/0x94 returned -19 after 1 usecs
calling amd_postcore_init+0x0/0x112 @ 1
initcall amd_postcore_init+0x0/0x112 returned 0 after 0 usecs
calling bts_init+0x0/0xab @ 1
initcall bts_init+0x0/0xab returned 0 after 2 usecs
calling pt_init+0x0/0x334 @ 1
initcall pt_init+0x0/0x334 returned 0 after 13 usecs
calling boot_params_ksysfs_init+0x0/0x228 @ 1
initcall boot_params_ksysfs_init+0x0/0x228 returned 0 after 19 usecs
calling sbf_init+0x0/0xcd @ 1
initcall sbf_init+0x0/0xcd returned 0 after 0 usecs
calling arch_kdebugfs_init+0x0/0x1d1 @ 1
initcall arch_kdebugfs_init+0x0/0x1d1 returned 0 after 9 usecs
calling mtrr_if_init+0x0/0x62 @ 1
initcall mtrr_if_init+0x0/0x62 returned 0 after 1 usecs
calling ffh_cstate_init+0x0/0x2b @ 1
initcall ffh_cstate_init+0x0/0x2b returned 0 after 0 usecs
calling activate_jump_labels+0x0/0x67 @ 1
initcall activate_jump_labels+0x0/0x67 returned 0 after 0 usecs
calling gigantic_pages_init+0x0/0x32 @ 1
initcall gigantic_pages_init+0x0/0x32 returned 0 after 0 usecs
calling kcmp_cookies_init+0x0/0x36 @ 1
initcall kcmp_cookies_init+0x0/0x36 returned 0 after 1 usecs
calling acpi_pci_init+0x0/0x58 @ 1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
initcall acpi_pci_init+0x0/0x58 returned 0 after 2 usecs
calling dma_bus_init+0x0/0xd8 @ 1
initcall dma_bus_init+0x0/0xd8 returned 0 after 10 usecs
calling dma_channel_table_init+0x0/0xd7 @ 1
initcall dma_channel_table_init+0x0/0xd7 returned 0 after 6 usecs
calling dmi_id_init+0x0/0x31d @ 1
initcall dmi_id_init+0x0/0x31d returned 0 after 25 usecs
calling dca_init+0x0/0x1e @ 1
dca service started, version 1.12.1
initcall dca_init+0x0/0x1e returned 0 after 2 usecs
calling pci_arch_init+0x0/0x66 @ 1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x40000000-0x4fffffff] (base 0x40000000)
PCI: MMCONFIG at [mem 0x40000000-0x4fffffff] reserved in E820
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x66 returned 0 after 26 usecs
calling init_vdso+0x0/0x35 @ 1
initcall init_vdso+0x0/0x35 returned 0 after 41 usecs
calling sysenter_setup+0x0/0x14 @ 1
initcall sysenter_setup+0x0/0x14 returned 0 after 1 usecs
calling fixup_ht_bug+0x0/0xa6 @ 1
initcall fixup_ht_bug+0x0/0xa6 returned 0 after 0 usecs
calling topology_init+0x0/0x8e @ 1
initcall topology_init+0x0/0x8e returned 0 after 401 usecs
calling mtrr_init_finialize+0x0/0x42 @ 1
initcall mtrr_init_finialize+0x0/0x42 returned 0 after 0 usecs
calling uid_cache_init+0x0/0x95 @ 1
initcall uid_cache_init+0x0/0x95 returned 0 after 1 usecs
calling param_sysfs_init+0x0/0x194 @ 1
initcall param_sysfs_init+0x0/0x194 returned 0 after 1989 usecs
calling user_namespace_sysctl_init+0x0/0x34 @ 1
initcall user_namespace_sysctl_init+0x0/0x34 returned 0 after 8 usecs
calling proc_schedstat_init+0x0/0x22 @ 1
initcall proc_schedstat_init+0x0/0x22 returned 0 after 1 usecs
calling pm_sysrq_init+0x0/0x19 @ 1
initcall pm_sysrq_init+0x0/0x19 returned 0 after 7 usecs
calling create_proc_profile+0x0/0xe0 @ 1
initcall create_proc_profile+0x0/0xe0 returned 0 after 0 usecs
calling cgroup_namespaces_init+0x0/0x3 @ 1
initcall cgroup_namespaces_init+0x0/0x3 returned 0 after 0 usecs
calling user_namespaces_init+0x0/0x2d @ 1
initcall user_namespaces_init+0x0/0x2d returned 0 after 3 usecs
calling oom_init+0x0/0x5f @ 1
initcall oom_init+0x0/0x5f returned 0 after 13 usecs
calling default_bdi_init+0x0/0xb0 @ 1
initcall default_bdi_init+0x0/0xb0 returned 0 after 33 usecs
calling percpu_enable_async+0x0/0xa @ 1
initcall percpu_enable_async+0x0/0xa returned 0 after 0 usecs
calling kcompactd_init+0x0/0x94 @ 1
initcall kcompactd_init+0x0/0x94 returned 0 after 11 usecs
calling init_reserve_notifier+0x0/0x24 @ 1
initcall init_reserve_notifier+0x0/0x24 returned 0 after 0 usecs
calling init_admin_reserve+0x0/0x40 @ 1
initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
calling init_user_reserve+0x0/0x40 @ 1
initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
calling hugetlb_init+0x0/0x1b @ 1
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
initcall hugetlb_init+0x0/0x1b returned 0 after 20 usecs
calling ksm_init+0x0/0x19a @ 1
initcall ksm_init+0x0/0x19a returned 0 after 24 usecs
calling hugepage_init+0x0/0x156 @ 1
initcall hugepage_init+0x0/0x156 returned 0 after 20 usecs
calling mem_cgroup_swap_init+0x0/0x5a @ 1
initcall mem_cgroup_swap_init+0x0/0x5a returned 0 after 1 usecs
calling mem_cgroup_init+0x0/0x14d @ 1
initcall mem_cgroup_init+0x0/0x14d returned 0 after 9 usecs
calling crypto_wq_init+0x0/0x31 @ 1
initcall crypto_wq_init+0x0/0x31 returned 0 after 18 usecs
calling cryptomgr_init+0x0/0x12 @ 1
initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
calling cryptd_init+0x0/0xba @ 1
initcall cryptd_init+0x0/0xba returned 0 after 1 usecs
calling init_bio+0x0/0xd4 @ 1
initcall init_bio+0x0/0xd4 returned 0 after 45 usecs
calling blk_settings_init+0x0/0x25 @ 1
initcall blk_settings_init+0x0/0x25 returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x2a @ 1
initcall blk_ioc_init+0x0/0x2a returned 0 after 2 usecs
calling blk_softirq_init+0x0/0x7d @ 1
initcall blk_softirq_init+0x0/0x7d returned 0 after 0 usecs
calling blk_mq_init+0x0/0x2a @ 1
initcall blk_mq_init+0x0/0x2a returned 0 after 0 usecs
calling genhd_device_init+0x0/0x76 @ 1
initcall genhd_device_init+0x0/0x76 returned 0 after 29 usecs
calling raid6_select_algo+0x0/0x8f @ 1
raid6: Forced to use recovery algorithm avx2x2
raid6: Forced gen() algo avx2x4
initcall raid6_select_algo+0x0/0x8f returned 0 after 1 usecs
calling irq_poll_setup+0x0/0x7d @ 1
initcall irq_poll_setup+0x0/0x7d returned 0 after 0 usecs
calling pwm_debugfs_init+0x0/0x24 @ 1
initcall pwm_debugfs_init+0x0/0x24 returned 0 after 0 usecs
calling pwm_sysfs_init+0x0/0x19 @ 1
initcall pwm_sysfs_init+0x0/0x19 returned 0 after 2 usecs
calling pci_slot_init+0x0/0x50 @ 1
initcall pci_slot_init+0x0/0x50 returned 0 after 1 usecs
calling fbmem_init+0x0/0xcf @ 1
initcall fbmem_init+0x0/0xcf returned 0 after 4 usecs
calling acpi_init+0x0/0x314 @ 1
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x50000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfbf3d000-0xfbf3dfff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfbf20000-0xfbf2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbf3c000-0xfbf3c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfbf00000-0xfbf1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfbf39000-0xfbf39fff]
pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbf38000-0xfbf383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbf30000-0xfbf33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: Enabling MPC IRBNCE
pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: Enabling MPC IRBNCE
pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbf37000-0xfbf373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbf36000-0xfbf367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbf35000-0xfbf350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1002:6759] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xfbe20000-0xfbe3ffff 64bit]
pci 0000:02:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x30: [mem 0xfbe00000-0xfbe1ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: [1002:aa90] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xfbe40000-0xfbe43fff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfbd00000-0xfbd07fff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 3F
initcall acpi_init+0x0/0x314 returned 0 after 101994 usecs
calling pnp_init+0x0/0x12 @ 1
initcall pnp_init+0x0/0x12 returned 0 after 5 usecs
calling misc_init+0x0/0xbc @ 1
initcall misc_init+0x0/0xbc returned 0 after 4 usecs
calling cn_init+0x0/0xc0 @ 1
initcall cn_init+0x0/0xc0 returned 0 after 3 usecs
calling dax_fs_init+0x0/0xbf @ 1
initcall dax_fs_init+0x0/0xbf returned 0 after 13 usecs
calling dax_init+0x0/0x30 @ 1
initcall dax_init+0x0/0x30 returned 0 after 2 usecs
calling dma_buf_init+0x0/0xac @ 1
initcall dma_buf_init+0x0/0xac returned 0 after 2 usecs
calling init_scsi+0x0/0x78 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x78 returned 0 after 40 usecs
calling ata_init+0x0/0x2fe @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x2fe returned 0 after 32 usecs
calling vga_arb_device_init+0x0/0x178 @ 1
pci 0000:02:00.0: vgaarb: setting as boot VGA device
pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:02:00.0: vgaarb: bridge control possible
vgaarb: loaded
initcall vga_arb_device_init+0x0/0x178 returned 0 after 44 usecs
calling usb_init+0x0/0x162 @ 1
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x162 returned 0 after 46 usecs
calling serio_init+0x0/0x2a @ 1
initcall serio_init+0x0/0x2a returned 0 after 4 usecs
calling input_init+0x0/0x103 @ 1
initcall input_init+0x0/0x103 returned 0 after 3 usecs
calling rtc_init+0x0/0x4d @ 1
initcall rtc_init+0x0/0x4d returned 0 after 2 usecs
calling pps_init+0x0/0xaa @ 1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
initcall pps_init+0x0/0xaa returned 0 after 3 usecs
calling ptp_init+0x0/0x99 @ 1
PTP clock support registered
initcall ptp_init+0x0/0x99 returned 0 after 2 usecs
calling power_supply_class_init+0x0/0x40 @ 1
initcall power_supply_class_init+0x0/0x40 returned 0 after 3 usecs
calling hwmon_init+0x0/0xc5 @ 1
initcall hwmon_init+0x0/0xc5 returned 0 after 6 usecs
calling md_init+0x0/0x166 @ 1
initcall md_init+0x0/0x166 returned 0 after 33 usecs
calling mmc_init+0x0/0x35 @ 1
initcall mmc_init+0x0/0x35 returned 0 after 11 usecs
calling leds_init+0x0/0x3c @ 1
initcall leds_init+0x0/0x3c returned 0 after 1 usecs
calling dmi_init+0x0/0x111 @ 1
initcall dmi_init+0x0/0x111 returned 0 after 2 usecs
calling efisubsys_init+0x0/0x289 @ 1
Registered efivars operations
initcall efisubsys_init+0x0/0x289 returned 0 after 3692 usecs
calling hv_acpi_init+0x0/0x18b @ 1
initcall hv_acpi_init+0x0/0x18b returned -19 after 0 usecs
calling devfreq_init+0x0/0xa3 @ 1
initcall devfreq_init+0x0/0xa3 returned 0 after 20 usecs
calling devfreq_performance_init+0x0/0x12 @ 1
initcall devfreq_performance_init+0x0/0x12 returned 0 after 0 usecs
calling pci_subsys_init+0x0/0x48 @ 1
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x320ff018-0x33ffffff]
e820: reserve RAM buffer [mem 0x32111018-0x33ffffff]
e820: reserve RAM buffer [mem 0x39195000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3a1b3000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3b5c0000-0x3bffffff]
initcall pci_subsys_init+0x0/0x48 returned 0 after 6198 usecs
calling proto_init+0x0/0x12 @ 1
initcall proto_init+0x0/0x12 returned 0 after 1 usecs
calling net_dev_init+0x0/0x1ec @ 1
initcall net_dev_init+0x0/0x1ec returned 0 after 70 usecs
calling neigh_init+0x0/0x80 @ 1
initcall neigh_init+0x0/0x80 returned 0 after 0 usecs
calling fib_rules_init+0x0/0xac @ 1
initcall fib_rules_init+0x0/0xac returned 0 after 0 usecs
calling init_cgroup_netprio+0x0/0x14 @ 1
initcall init_cgroup_netprio+0x0/0x14 returned 0 after 0 usecs
calling pktsched_init+0x0/0x10f @ 1
initcall pktsched_init+0x0/0x10f returned 0 after 2 usecs
calling tc_filter_init+0x0/0x55 @ 1
initcall tc_filter_init+0x0/0x55 returned 0 after 0 usecs
calling genl_init+0x0/0x36 @ 1
initcall genl_init+0x0/0x36 returned 0 after 3 usecs
calling ipv4_netfilter_init+0x0/0x12 @ 1
initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 usecs
calling cipso_v4_init+0x0/0x64 @ 1
initcall cipso_v4_init+0x0/0x64 returned 0 after 0 usecs
calling netlbl_init+0x0/0x79 @ 1
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x79 returned 0 after 18 usecs
calling nmi_warning_debugfs+0x0/0x27 @ 1
initcall nmi_warning_debugfs+0x0/0x27 returned 0 after 6 usecs
calling save_microcode_in_initrd+0x0/0x78 @ 1
initcall save_microcode_in_initrd+0x0/0x78 returned 0 after 12 usecs
calling hpet_late_init+0x0/0x10e @ 1
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
initcall hpet_late_init+0x0/0x10e returned 0 after 2951 usecs
calling init_amd_nbs+0x0/0x99 @ 1
initcall init_amd_nbs+0x0/0x99 returned 0 after 15 usecs
calling clocksource_done_booting+0x0/0x42 @ 1
clocksource: Switched to clocksource hpet
initcall clocksource_done_booting+0x0/0x42 returned 0 after 13 usecs
calling tracer_init_tracefs+0x0/0x174 @ 1
initcall tracer_init_tracefs+0x0/0x174 returned 0 after 6209 usecs
calling init_trace_printk_function_export+0x0/0x32 @ 1
initcall init_trace_printk_function_export+0x0/0x32 returned 0 after 1 usecs
calling event_trace_init+0x0/0x2e5 @ 1
initcall event_trace_init+0x0/0x2e5 returned 0 after 8854 usecs
calling bpf_init+0x0/0x47 @ 1
initcall bpf_init+0x0/0x47 returned 0 after 2 usecs
calling init_pipe_fs+0x0/0x47 @ 1
initcall init_pipe_fs+0x0/0x47 returned 0 after 6 usecs
calling cgroup_writeback_init+0x0/0x2b @ 1
initcall cgroup_writeback_init+0x0/0x2b returned 0 after 13 usecs
calling inotify_user_setup+0x0/0x48 @ 1
initcall inotify_user_setup+0x0/0x48 returned 0 after 1 usecs
calling eventpoll_init+0x0/0xdd @ 1
initcall eventpoll_init+0x0/0xdd returned 0 after 1 usecs
calling anon_inode_init+0x0/0x5b @ 1
initcall anon_inode_init+0x0/0x5b returned 0 after 3 usecs
calling init_dax_wait_table+0x0/0x42 @ 1
initcall init_dax_wait_table+0x0/0x42 returned 0 after 26 usecs
calling proc_locks_init+0x0/0x22 @ 1
initcall proc_locks_init+0x0/0x22 returned 0 after 1 usecs
calling proc_cmdline_init+0x0/0x22 @ 1
initcall proc_cmdline_init+0x0/0x22 returned 0 after 0 usecs
calling proc_consoles_init+0x0/0x22 @ 1
initcall proc_consoles_init+0x0/0x22 returned 0 after 0 usecs
calling proc_cpuinfo_init+0x0/0x22 @ 1
initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 0 usecs
calling proc_devices_init+0x0/0x22 @ 1
initcall proc_devices_init+0x0/0x22 returned 0 after 0 usecs
calling proc_interrupts_init+0x0/0x22 @ 1
initcall proc_interrupts_init+0x0/0x22 returned 0 after 0 usecs
calling proc_loadavg_init+0x0/0x22 @ 1
initcall proc_loadavg_init+0x0/0x22 returned 0 after 0 usecs
calling proc_meminfo_init+0x0/0x22 @ 1
initcall proc_meminfo_init+0x0/0x22 returned 0 after 1 usecs
calling proc_stat_init+0x0/0x22 @ 1
initcall proc_stat_init+0x0/0x22 returned 0 after 0 usecs
calling proc_uptime_init+0x0/0x22 @ 1
initcall proc_uptime_init+0x0/0x22 returned 0 after 0 usecs
calling proc_version_init+0x0/0x22 @ 1
initcall proc_version_init+0x0/0x22 returned 0 after 0 usecs
calling proc_softirqs_init+0x0/0x22 @ 1
initcall proc_softirqs_init+0x0/0x22 returned 0 after 0 usecs
calling proc_kmsg_init+0x0/0x25 @ 1
initcall proc_kmsg_init+0x0/0x25 returned 0 after 0 usecs
calling proc_page_init+0x0/0x5f @ 1
initcall proc_page_init+0x0/0x5f returned 0 after 1 usecs
calling init_ramfs_fs+0x0/0x20 @ 1
initcall init_ramfs_fs+0x0/0x20 returned 0 after 0 usecs
calling init_hugetlbfs_fs+0x0/0x155 @ 1
initcall init_hugetlbfs_fs+0x0/0x155 returned 0 after 19 usecs
calling blk_scsi_ioctl_init+0x0/0x387 @ 1
initcall blk_scsi_ioctl_init+0x0/0x387 returned 0 after 0 usecs
calling dynamic_debug_init_debugfs+0x0/0x67 @ 1
initcall dynamic_debug_init_debugfs+0x0/0x67 returned 0 after 2 usecs
calling fb_console_init+0x0/0x118 @ 1
initcall fb_console_init+0x0/0x118 returned 0 after 16 usecs
calling acpi_event_init+0x0/0x30 @ 1
initcall acpi_event_init+0x0/0x30 returned 0 after 6 usecs
calling pnp_system_init+0x0/0x12 @ 1
initcall pnp_system_init+0x0/0x12 returned 0 after 4 usecs
calling pnpacpi_init+0x0/0x6e @ 1
pnp: PnP ACPI init
system 00:00: [io 0x0454-0x0457] has been reserved
system 00:00: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0x0400-0x047f] could not be reserved
system 00:02: [io 0x0580-0x059f] has been reserved
system 00:02: [io 0x0600-0x061f] has been reserved
system 00:02: [io 0x0880-0x0883] has been reserved
system 00:02: [io 0x0800-0x081f] has been reserved
system 00:02: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:02: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:02: [mem 0xff000000-0xffffffff] has been reserved
system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:02: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:02: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:02: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0a00-0x0a0f] has been reserved
system 00:03: [io 0x0a10-0x0a1f] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 4 devices
initcall pnpacpi_init+0x0/0x6e returned 0 after 1181 usecs
calling chr_dev_init+0x0/0xa8 @ 1
initcall chr_dev_init+0x0/0xa8 returned 0 after 1490 usecs
calling firmware_class_init+0x0/0x2c @ 1
initcall firmware_class_init+0x0/0x2c returned 0 after 0 usecs
calling thermal_init+0x0/0xa3 @ 1
initcall thermal_init+0x0/0xa3 returned 0 after 8 usecs
calling cpufreq_gov_performance_init+0x0/0x12 @ 1
initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 usecs
calling init_acpi_pm_clocksource+0x0/0xd3 @ 1
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
initcall init_acpi_pm_clocksource+0x0/0xd3 returned 0 after 4411 usecs
calling pcibios_assign_resources+0x0/0xc2 @ 1
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x50000000-0xfbffbfff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
initcall pcibios_assign_resources+0x0/0xc2 returned 0 after 236 usecs
calling sysctl_core_init+0x0/0x2c @ 1
initcall sysctl_core_init+0x0/0x2c returned 0 after 12 usecs
calling eth_offload_init+0x0/0x14 @ 1
initcall eth_offload_init+0x0/0x14 returned 0 after 0 usecs
calling inet_init+0x0/0x269 @ 1
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
initcall inet_init+0x0/0x269 returned 0 after 697 usecs
calling ipv4_offload_init+0x0/0x5d @ 1
initcall ipv4_offload_init+0x0/0x5d returned 0 after 0 usecs
calling af_unix_init+0x0/0x4e @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x4e returned 0 after 4 usecs
calling ipv6_offload_init+0x0/0x7f @ 1
initcall ipv6_offload_init+0x0/0x7f returned 0 after 0 usecs
calling pci_apply_final_quirks+0x0/0xfb @ 1
pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (64 != 32), using 64 bytes
initcall pci_apply_final_quirks+0x0/0xfb returned 0 after 795 usecs
calling acpi_reserve_resources+0x0/0xeb @ 1
initcall acpi_reserve_resources+0x0/0xeb returned 0 after 1 usecs
calling populate_rootfs+0x0/0xab @ 1
initcall populate_rootfs+0x0/0xab returned 0 after 31 usecs
calling pci_iommu_init+0x0/0x3c @ 1
DMAR: [Firmware Bug]: RMRR entry for device 04:00.0 is broken - applying workaround
DMAR: dmar0: Using Queued invalidation
DMAR: dmar1: Using Queued invalidation
DMAR: Setting RMRR:
DMAR: Setting identity map for device 0000:00:14.0 [0x3b42e000 - 0x3b43dfff]
DMAR: Setting identity map for device 0000:00:1a.0 [0x3b42e000 - 0x3b43dfff]
DMAR: Setting identity map for device 0000:00:1d.0 [0x3b42e000 - 0x3b43dfff]
DMAR: Setting identity map for device 0000:04:00.0 [0x3b42e000 - 0x3b43dfff]
DMAR: Prepare 0-16MiB unity mapping for LPC
DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
DMAR: Intel(R) Virtualization Technology for Directed I/O
iommu: Adding device 0000:ff:0b.0 to group 0
iommu: Adding device 0000:ff:0b.1 to group 0
iommu: Adding device 0000:ff:0b.2 to group 0
iommu: Adding device 0000:ff:0b.3 to group 0
iommu: Adding device 0000:ff:0c.0 to group 1
iommu: Adding device 0000:ff:0c.1 to group 1
iommu: Adding device 0000:ff:0c.2 to group 1
iommu: Adding device 0000:ff:0c.3 to group 1
iommu: Adding device 0000:ff:0c.4 to group 1
iommu: Adding device 0000:ff:0c.5 to group 1
iommu: Adding device 0000:ff:0c.6 to group 1
iommu: Adding device 0000:ff:0c.7 to group 1
iommu: Adding device 0000:ff:0f.0 to group 2
iommu: Adding device 0000:ff:0f.1 to group 2
iommu: Adding device 0000:ff:0f.4 to group 2
iommu: Adding device 0000:ff:0f.5 to group 2
iommu: Adding device 0000:ff:0f.6 to group 2
iommu: Adding device 0000:ff:10.0 to group 3
iommu: Adding device 0000:ff:10.1 to group 3
iommu: Adding device 0000:ff:10.5 to group 3
iommu: Adding device 0000:ff:10.6 to group 3
iommu: Adding device 0000:ff:10.7 to group 3
iommu: Adding device 0000:ff:12.0 to group 4
iommu: Adding device 0000:ff:12.1 to group 4
iommu: Adding device 0000:ff:13.0 to group 5
iommu: Adding device 0000:ff:13.1 to group 5
iommu: Adding device 0000:ff:13.2 to group 5
iommu: Adding device 0000:ff:13.3 to group 5
iommu: Adding device 0000:ff:13.4 to group 5
iommu: Adding device 0000:ff:13.5 to group 5
iommu: Adding device 0000:ff:13.6 to group 5
iommu: Adding device 0000:ff:13.7 to group 5
iommu: Adding device 0000:ff:14.0 to group 6
iommu: Adding device 0000:ff:14.1 to group 6
iommu: Adding device 0000:ff:14.2 to group 6
iommu: Adding device 0000:ff:14.3 to group 6
iommu: Adding device 0000:ff:14.4 to group 6
iommu: Adding device 0000:ff:14.5 to group 6
iommu: Adding device 0000:ff:14.6 to group 6
iommu: Adding device 0000:ff:14.7 to group 6
iommu: Adding device 0000:ff:15.0 to group 7
iommu: Adding device 0000:ff:15.1 to group 7
iommu: Adding device 0000:ff:15.2 to group 7
iommu: Adding device 0000:ff:15.3 to group 7
iommu: Adding device 0000:ff:16.0 to group 8
iommu: Adding device 0000:ff:16.6 to group 8
iommu: Adding device 0000:ff:16.7 to group 8
iommu: Adding device 0000:ff:17.0 to group 9
iommu: Adding device 0000:ff:17.4 to group 9
iommu: Adding device 0000:ff:17.5 to group 9
iommu: Adding device 0000:ff:17.6 to group 9
iommu: Adding device 0000:ff:17.7 to group 9
iommu: Adding device 0000:ff:1e.0 to group 10
iommu: Adding device 0000:ff:1e.1 to group 10
iommu: Adding device 0000:ff:1e.2 to group 10
iommu: Adding device 0000:ff:1e.3 to group 10
iommu: Adding device 0000:ff:1e.4 to group 10
iommu: Adding device 0000:ff:1f.0 to group 11
iommu: Adding device 0000:ff:1f.2 to group 11
iommu: Adding device 0000:00:00.0 to group 12
iommu: Adding device 0000:00:01.0 to group 13
iommu: Adding device 0000:00:03.0 to group 14
iommu: Adding device 0000:00:05.0 to group 15
iommu: Adding device 0000:00:05.1 to group 15
iommu: Adding device 0000:00:05.2 to group 15
iommu: Adding device 0000:00:05.4 to group 15
iommu: Adding device 0000:00:11.0 to group 16
iommu: Adding device 0000:00:14.0 to group 17
iommu: Adding device 0000:00:16.0 to group 18
iommu: Adding device 0000:00:19.0 to group 19
iommu: Adding device 0000:00:1a.0 to group 20
iommu: Adding device 0000:00:1b.0 to group 21
iommu: Adding device 0000:00:1c.0 to group 22
iommu: Adding device 0000:00:1c.4 to group 23
iommu: Adding device 0000:00:1d.0 to group 24
iommu: Adding device 0000:00:1f.0 to group 25
iommu: Adding device 0000:00:1f.2 to group 25
iommu: Adding device 0000:00:1f.3 to group 25
iommu: Adding device 0000:02:00.0 to group 26
iommu: Adding device 0000:02:00.1 to group 26
iommu: Adding device 0000:04:00.0 to group 27
initcall pci_iommu_init+0x0/0x3c returned 0 after 5621 usecs
calling ir_dev_scope_init+0x0/0x33 @ 1
initcall ir_dev_scope_init+0x0/0x33 returned 0 after 0 usecs
calling ia32_binfmt_init+0x0/0x14 @ 1
initcall ia32_binfmt_init+0x0/0x14 returned 0 after 2 usecs
calling amd_uncore_init+0x0/0x275 @ 1
initcall amd_uncore_init+0x0/0x275 returned -19 after 0 usecs
calling amd_ibs_init+0x0/0x1d5 @ 1
initcall amd_ibs_init+0x0/0x1d5 returned -19 after 0 usecs
calling msr_init+0x0/0xc3 @ 1
initcall msr_init+0x0/0xc3 returned 0 after 2 usecs
calling intel_cqm_init+0x0/0x3b7 @ 1
Intel CQM monitoring enabled
Intel MBM enabled
initcall intel_cqm_init+0x0/0x3b7 returned 0 after 77 usecs
calling rapl_pmu_init+0x0/0x20d @ 1
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
initcall rapl_pmu_init+0x0/0x20d returned 0 after 69 usecs
calling intel_uncore_init+0x0/0x24d @ 1
initcall intel_uncore_init+0x0/0x24d returned 0 after 223 usecs
calling cstate_pmu_init+0x0/0x1a7 @ 1
initcall cstate_pmu_init+0x0/0x1a7 returned 0 after 77 usecs
calling vmx_init+0x0/0x1e @ 1
initcall vmx_init+0x0/0x1e returned 0 after 195 usecs
calling register_kernel_offset_dumper+0x0/0x1b @ 1
initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 0 usecs
calling i8259A_init_ops+0x0/0x24 @ 1
initcall i8259A_init_ops+0x0/0x24 returned 0 after 0 usecs
calling init_tsc_clocksource+0x0/0xcc @ 1
initcall init_tsc_clocksource+0x0/0xcc returned 0 after 1 usecs
calling add_rtc_cmos+0x0/0xcf @ 1
initcall add_rtc_cmos+0x0/0xcf returned 0 after 0 usecs
calling i8237A_init_ops+0x0/0x14 @ 1
initcall i8237A_init_ops+0x0/0x14 returned 0 after 2 usecs
calling thermal_throttle_init_device+0x0/0x42 @ 1
initcall thermal_throttle_init_device+0x0/0x42 returned 0 after 137 usecs
calling msr_init+0x0/0xdb @ 1
initcall msr_init+0x0/0xdb returned 0 after 351 usecs
calling cpuid_init+0x0/0xdb @ 1
initcall cpuid_init+0x0/0xdb returned 0 after 251 usecs
calling ioapic_init_ops+0x0/0x14 @ 1
initcall ioapic_init_ops+0x0/0x14 returned 0 after 0 usecs
calling start_periodic_check_for_corruption+0x0/0x50 @ 1
initcall start_periodic_check_for_corruption+0x0/0x50 returned 0 after 0 usecs
calling sysfb_init+0x0/0x77 @ 1
initcall sysfb_init+0x0/0x77 returned 0 after 16 usecs
calling aes_init+0x0/0x12 @ 1
alg: self-tests disabled
initcall aes_init+0x0/0x12 returned 0 after 43 usecs
calling init+0x0/0x45 @ 1
initcall init+0x0/0x45 returned 0 after 167 usecs
calling crc32c_intel_mod_init+0x0/0x57 @ 1
initcall crc32c_intel_mod_init+0x0/0x57 returned 0 after 28 usecs
calling sha256_ssse3_mod_init+0x0/0xe8 @ 1
initcall sha256_ssse3_mod_init+0x0/0xe8 returned 0 after 168 usecs
calling sha512_ssse3_mod_init+0x0/0xad @ 1
initcall sha512_ssse3_mod_init+0x0/0xad returned 0 after 170 usecs
calling camellia_aesni_init+0x0/0x7b @ 1
initcall camellia_aesni_init+0x0/0x7b returned 0 after 286 usecs
calling serpent_init+0x0/0x41 @ 1
initcall serpent_init+0x0/0x41 returned 0 after 282 usecs
calling camellia_aesni_init+0x0/0x89 @ 1
initcall camellia_aesni_init+0x0/0x89 returned 0 after 287 usecs
calling init+0x0/0x6f @ 1
initcall init+0x0/0x6f returned 0 after 295 usecs
calling iosf_mbi_init+0x0/0x1b @ 1
initcall iosf_mbi_init+0x0/0x1b returned 0 after 14 usecs
calling proc_execdomains_init+0x0/0x22 @ 1
initcall proc_execdomains_init+0x0/0x22 returned 0 after 1 usecs
calling cpuhp_sysfs_init+0x0/0x7b @ 1
initcall cpuhp_sysfs_init+0x0/0x7b returned 0 after 11 usecs
calling ioresources_init+0x0/0x3c @ 1
initcall ioresources_init+0x0/0x3c returned 0 after 1 usecs
calling init_sched_debug_procfs+0x0/0x2c @ 1
initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 usecs
calling timekeeping_init_ops+0x0/0x14 @ 1
initcall timekeeping_init_ops+0x0/0x14 returned 0 after 0 usecs
calling init_clocksource_sysfs+0x0/0x69 @ 1
initcall init_clocksource_sysfs+0x0/0x69 returned 0 after 23 usecs
calling init_timer_list_procfs+0x0/0x2c @ 1
initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 usecs
calling alarmtimer_init+0x0/0x186 @ 1
initcall alarmtimer_init+0x0/0x186 returned 0 after 21 usecs
calling init_posix_timers+0x0/0x252 @ 1
initcall init_posix_timers+0x0/0x252 returned 0 after 4 usecs
calling init_posix_cpu_timers+0x0/0x8f @ 1
initcall init_posix_cpu_timers+0x0/0x8f returned 0 after 0 usecs
calling clockevents_init_sysfs+0x0/0xd1 @ 1
initcall clockevents_init_sysfs+0x0/0xd1 returned 0 after 85 usecs
calling proc_dma_init+0x0/0x22 @ 1
initcall proc_dma_init+0x0/0x22 returned 0 after 0 usecs
calling proc_modules_init+0x0/0x22 @ 1
initcall proc_modules_init+0x0/0x22 returned 0 after 0 usecs
calling kallsyms_init+0x0/0x25 @ 1
initcall kallsyms_init+0x0/0x25 returned 0 after 0 usecs
calling pid_namespaces_init+0x0/0x40 @ 1
initcall pid_namespaces_init+0x0/0x40 returned 0 after 5 usecs
calling utsname_sysctl_init+0x0/0x14 @ 1
initcall utsname_sysctl_init+0x0/0x14 returned 0 after 4 usecs
calling init_tracepoints+0x0/0x28 @ 1
initcall init_tracepoints+0x0/0x28 returned 0 after 0 usecs
calling init_lstats_procfs+0x0/0x25 @ 1
initcall init_lstats_procfs+0x0/0x25 returned 0 after 0 usecs
calling init_blk_tracer+0x0/0x56 @ 1
initcall init_blk_tracer+0x0/0x56 returned 0 after 4 usecs
calling perf_event_sysfs_init+0x0/0x8d @ 1
initcall perf_event_sysfs_init+0x0/0x8d returned 0 after 409 usecs
calling padata_driver_init+0x0/0x39 @ 1
initcall padata_driver_init+0x0/0x39 returned 0 after 0 usecs
calling system_trusted_keyring_init+0x0/0x61 @ 1
Initialise system trusted keyrings
initcall system_trusted_keyring_init+0x0/0x61 returned 0 after 4 usecs
calling kswapd_init+0x0/0x89 @ 1
initcall kswapd_init+0x0/0x89 returned 0 after 20 usecs
calling extfrag_debug_init+0x0/0x78 @ 1
initcall extfrag_debug_init+0x0/0x78 returned 0 after 2 usecs
calling mm_compute_batch_init+0x0/0x19 @ 1
initcall mm_compute_batch_init+0x0/0x19 returned 0 after 0 usecs
calling workingset_init+0x0/0x7f @ 1
workingset: timestamp_bits=44 max_order=22 bucket_order=0
initcall workingset_init+0x0/0x7f returned 0 after 1 usecs
calling proc_vmalloc_init+0x0/0x25 @ 1
initcall proc_vmalloc_init+0x0/0x25 returned 0 after 1 usecs
calling procswaps_init+0x0/0x22 @ 1
initcall procswaps_init+0x0/0x22 returned 0 after 0 usecs
calling slab_sysfs_init+0x0/0xfc @ 1
initcall slab_sysfs_init+0x0/0xfc returned 0 after 900 usecs
calling fcntl_init+0x0/0x2a @ 1
initcall fcntl_init+0x0/0x2a returned 0 after 1 usecs
calling proc_filesystems_init+0x0/0x22 @ 1
initcall proc_filesystems_init+0x0/0x22 returned 0 after 0 usecs
calling start_dirtytime_writeback+0x0/0x2a @ 1
initcall start_dirtytime_writeback+0x0/0x2a returned 0 after 0 usecs
calling blkdev_init+0x0/0x25 @ 1
initcall blkdev_init+0x0/0x25 returned 0 after 35 usecs
calling dio_init+0x0/0x2d @ 1
initcall dio_init+0x0/0x2d returned 0 after 15 usecs
calling dnotify_init+0x0/0x79 @ 1
initcall dnotify_init+0x0/0x79 returned 0 after 2 usecs
calling fanotify_user_setup+0x0/0x52 @ 1
initcall fanotify_user_setup+0x0/0x52 returned 0 after 2 usecs
calling aio_setup+0x0/0xa3 @ 1
initcall aio_setup+0x0/0xa3 returned 0 after 13 usecs
calling init_sys32_ioctl+0x0/0x28 @ 1
initcall init_sys32_ioctl+0x0/0x28 returned 0 after 86 usecs
calling mbcache_init+0x0/0x31 @ 1
initcall mbcache_init+0x0/0x31 returned 0 after 13 usecs
calling init_devpts_fs+0x0/0x28 @ 1
initcall init_devpts_fs+0x0/0x28 returned 0 after 5 usecs
calling ext4_init_fs+0x0/0x178 @ 1
initcall ext4_init_fs+0x0/0x178 returned 0 after 68 usecs
calling journal_init+0x0/0x10c @ 1
initcall journal_init+0x0/0x10c returned 0 after 65 usecs
calling init_fat_fs+0x0/0x4a @ 1
initcall init_fat_fs+0x0/0x4a returned 0 after 22 usecs
calling init_vfat_fs+0x0/0x12 @ 1
initcall init_vfat_fs+0x0/0x12 returned 0 after 0 usecs
calling init_msdos_fs+0x0/0x12 @ 1
initcall init_msdos_fs+0x0/0x12 returned 0 after 0 usecs
calling init_nls_cp437+0x0/0x14 @ 1
initcall init_nls_cp437+0x0/0x14 returned 0 after 0 usecs
calling init_nls_ascii+0x0/0x14 @ 1
initcall init_nls_ascii+0x0/0x14 returned 0 after 0 usecs
calling init_autofs4_fs+0x0/0x26 @ 1
initcall init_autofs4_fs+0x0/0x26 returned 0 after 24 usecs
calling ovl_init+0x0/0x12 @ 1
initcall ovl_init+0x0/0x12 returned 0 after 0 usecs
calling init_xfs_fs+0x0/0x19b @ 1
SGI XFS with ACLs, security attributes, realtime, no debug enabled
initcall init_xfs_fs+0x0/0x19b returned 0 after 266 usecs
calling init_pstore_fs+0x0/0x47 @ 1
initcall init_pstore_fs+0x0/0x47 returned 0 after 1 usecs
calling efivarfs_init+0x0/0x34 @ 1
initcall efivarfs_init+0x0/0x34 returned 0 after 0 usecs
calling ipc_init+0x0/0x17 @ 1
initcall ipc_init+0x0/0x17 returned 0 after 1 usecs
calling ipc_sysctl_init+0x0/0x14 @ 1
initcall ipc_sysctl_init+0x0/0x14 returned 0 after 7 usecs
calling init_mqueue_fs+0x0/0xf3 @ 1
initcall init_mqueue_fs+0x0/0xf3 returned 0 after 31 usecs
calling key_proc_init+0x0/0x5e @ 1
initcall key_proc_init+0x0/0x5e returned 0 after 1 usecs
calling crypto_algapi_init+0x0/0xd @ 1
initcall crypto_algapi_init+0x0/0xd returned 0 after 0 usecs
calling seqiv_module_init+0x0/0x12 @ 1
initcall seqiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling echainiv_module_init+0x0/0x12 @ 1
initcall echainiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling rsa_init+0x0/0x40 @ 1
initcall rsa_init+0x0/0x40 returned 0 after 31 usecs
calling hmac_module_init+0x0/0x12 @ 1
initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs
calling crypto_null_mod_init+0x0/0x48 @ 1
initcall crypto_null_mod_init+0x0/0x48 returned 0 after 115 usecs
calling md5_mod_init+0x0/0x12 @ 1
initcall md5_mod_init+0x0/0x12 returned 0 after 28 usecs
calling sha1_generic_mod_init+0x0/0x12 @ 1
initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 28 usecs
calling sha256_generic_mod_init+0x0/0x17 @ 1
initcall sha256_generic_mod_init+0x0/0x17 returned 0 after 59 usecs
calling sha512_generic_mod_init+0x0/0x17 @ 1
initcall sha512_generic_mod_init+0x0/0x17 returned 0 after 58 usecs
calling crypto_ecb_module_init+0x0/0x12 @ 1
initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 0 usecs
calling crypto_cbc_module_init+0x0/0x12 @ 1
initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 usecs
calling crypto_module_init+0x0/0x12 @ 1
initcall crypto_module_init+0x0/0x12 returned 0 after 0 usecs
calling crypto_module_init+0x0/0x12 @ 1
initcall crypto_module_init+0x0/0x12 returned 0 after 0 usecs
calling crypto_ctr_module_init+0x0/0x39 @ 1
initcall crypto_ctr_module_init+0x0/0x39 returned 0 after 0 usecs
calling crypto_ccm_module_init+0x0/0x76 @ 1
initcall crypto_ccm_module_init+0x0/0x76 returned 0 after 0 usecs
calling serpent_mod_init+0x0/0x17 @ 1
initcall serpent_mod_init+0x0/0x17 returned 0 after 56 usecs
calling aes_init+0x0/0x12 @ 1
initcall aes_init+0x0/0x12 returned 0 after 28 usecs
calling aes_init+0x0/0x12 @ 1
initcall aes_init+0x0/0x12 returned 0 after 31 usecs
calling arc4_init+0x0/0x17 @ 1
initcall arc4_init+0x0/0x17 returned 0 after 63 usecs
calling deflate_mod_init+0x0/0x3f @ 1
initcall deflate_mod_init+0x0/0x3f returned 0 after 170 usecs
calling crc32c_mod_init+0x0/0x12 @ 1
initcall crc32c_mod_init+0x0/0x12 returned 0 after 29 usecs
calling crct10dif_mod_init+0x0/0x12 @ 1
initcall crct10dif_mod_init+0x0/0x12 returned 0 after 29 usecs
calling drbg_init+0x0/0x1d1 @ 1
initcall drbg_init+0x0/0x1d1 returned 0 after 232 usecs
calling jent_mod_init+0x0/0x30 @ 1
initcall jent_mod_init+0x0/0x30 returned 0 after 248 usecs
calling af_alg_init+0x0/0x3b @ 1
NET: Registered protocol family 38
initcall af_alg_init+0x0/0x3b returned 0 after 1 usecs
calling algif_hash_init+0x0/0x12 @ 1
initcall algif_hash_init+0x0/0x12 returned 0 after 0 usecs
calling algif_skcipher_init+0x0/0x12 @ 1
initcall algif_skcipher_init+0x0/0x12 returned 0 after 0 usecs
calling asymmetric_key_init+0x0/0x12 @ 1
Key type asymmetric registered
initcall asymmetric_key_init+0x0/0x12 returned 0 after 1 usecs
calling x509_key_init+0x0/0x12 @ 1
Asymmetric key parser 'x509' registered
initcall x509_key_init+0x0/0x12 returned 0 after 0 usecs
calling proc_genhd_init+0x0/0x3c @ 1
initcall proc_genhd_init+0x0/0x3c returned 0 after 2 usecs
calling bsg_init+0x0/0x167 @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
initcall bsg_init+0x0/0x167 returned 0 after 10 usecs
calling throtl_init+0x0/0x42 @ 1
initcall throtl_init+0x0/0x42 returned 0 after 31 usecs
calling noop_init+0x0/0x12 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x12 returned 0 after 1 usecs
calling deadline_init+0x0/0x12 @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0x12 returned 0 after 0 usecs
calling cfq_init+0x0/0x74 @ 1
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x74 returned 0 after 7 usecs
calling deadline_init+0x0/0x12 @ 1
io scheduler mq-deadline registered
initcall deadline_init+0x0/0x12 returned 0 after 0 usecs
calling kyber_init+0x0/0x12 @ 1
io scheduler kyber registered
initcall kyber_init+0x0/0x12 returned 0 after 0 usecs
calling bfq_init+0x0/0x74 @ 1
io scheduler bfq registered
initcall bfq_init+0x0/0x74 returned 0 after 23 usecs
calling crc_t10dif_mod_init+0x0/0x57 @ 1
initcall crc_t10dif_mod_init+0x0/0x57 returned 0 after 2 usecs
calling libcrc32c_mod_init+0x0/0x2b @ 1
initcall libcrc32c_mod_init+0x0/0x2b returned 0 after 1 usecs
calling percpu_counter_startup+0x0/0x56 @ 1
initcall percpu_counter_startup+0x0/0x56 returned 0 after 68 usecs
calling sg_pool_init+0x0/0xdc @ 1
initcall sg_pool_init+0x0/0xdc returned 0 after 8 usecs
calling pci_proc_init+0x0/0x6e @ 1
initcall pci_proc_init+0x0/0x6e returned 0 after 65 usecs
calling pcie_portdrv_init+0x0/0x73 @ 1
initcall pcie_portdrv_init+0x0/0x73 returned 0 after 563 usecs
calling pcie_pme_service_init+0x0/0x12 @ 1
pcieport 0000:00:01.0: Signaling PME with IRQ 25
pcieport 0000:00:03.0: Signaling PME with IRQ 27
pcieport 0000:00:1c.0: Signaling PME with IRQ 28
pcieport 0000:00:1c.4: Signaling PME with IRQ 29
initcall pcie_pme_service_init+0x0/0x12 returned 0 after 66 usecs
calling pci_hotplug_init+0x0/0x3 @ 1
initcall pci_hotplug_init+0x0/0x3 returned 0 after 0 usecs
calling pci_stub_init+0x0/0x12c @ 1
initcall pci_stub_init+0x0/0x12c returned 0 after 11 usecs
calling pci_ep_cfs_init+0x0/0xce @ 1
initcall pci_ep_cfs_init+0x0/0xce returned 0 after 11 usecs
calling pci_epc_init+0x0/0x42 @ 1
initcall pci_epc_init+0x0/0x42 returned 0 after 2 usecs
calling pci_epf_init+0x0/0x2a @ 1
initcall pci_epf_init+0x0/0x2a returned 0 after 4 usecs
calling efifb_driver_init+0x0/0x14 @ 1
efifb: probing for efifb
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
initcall efifb_driver_init+0x0/0x14 returned 0 after 4229 usecs
calling intel_idle_init+0x0/0x59e @ 1
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x4F
intel_idle: lapic_timer_reliable_states 0xffffffff
initcall intel_idle_init+0x0/0x59e returned 0 after 264 usecs
calling acpi_button_driver_init+0x0/0x12 @ 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
initcall acpi_button_driver_init+0x0/0x12 returned 0 after 150 usecs
calling acpi_fan_driver_init+0x0/0x14 @ 1
initcall acpi_fan_driver_init+0x0/0x14 returned 0 after 6 usecs
calling acpi_video_init+0x0/0x84 @ 1
initcall acpi_video_init+0x0/0x84 returned 0 after 64 usecs
calling acpi_processor_driver_init+0x0/0x95 @ 1
initcall acpi_processor_driver_init+0x0/0x95 returned 0 after 916 usecs
calling acpi_thermal_init+0x0/0x7f @ 1
initcall acpi_thermal_init+0x0/0x7f returned 0 after 86 usecs
calling acpi_ec_sys_init+0x0/0xfc @ 1
initcall acpi_ec_sys_init+0x0/0xfc returned -19 after 0 usecs
calling acpi_pad_init+0x0/0xe2 @ 1
initcall acpi_pad_init+0x0/0xe2 returned 0 after 48 usecs
calling erst_init+0x0/0x2ce @ 1
initcall erst_init+0x0/0x2ce returned 0 after 0 usecs
calling gpio_clk_driver_init+0x0/0x14 @ 1
initcall gpio_clk_driver_init+0x0/0x14 returned 0 after 4 usecs
calling plt_clk_driver_init+0x0/0x14 @ 1
initcall plt_clk_driver_init+0x0/0x14 returned 0 after 3 usecs
calling ioat_init_module+0x0/0xb1 @ 1
ioatdma: Intel(R) QuickData Technology Driver 4.00
initcall ioat_init_module+0x0/0xb1 returned 0 after 30 usecs
calling virtio_pci_driver_init+0x0/0x1b @ 1
initcall virtio_pci_driver_init+0x0/0x1b returned 0 after 12 usecs
calling pty_init+0x0/0x1ec @ 1
initcall pty_init+0x0/0x1ec returned 0 after 31 usecs
calling sysrq_init+0x0/0x6f @ 1
initcall sysrq_init+0x0/0x6f returned 0 after 1 usecs
calling serial8250_init+0x0/0x166 @ 1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
initcall serial8250_init+0x0/0x166 returned 0 after 40253 usecs
calling serial_pci_driver_init+0x0/0x1b @ 1
initcall serial_pci_driver_init+0x0/0x1b returned 0 after 45 usecs
calling ttyprintk_init+0x0/0x102 @ 1
initcall ttyprintk_init+0x0/0x102 returned 0 after 21 usecs
calling init+0x0/0xfd @ 1
initcall init+0x0/0xfd returned 0 after 12 usecs
calling hpet_init+0x0/0x65 @ 1
initcall hpet_init+0x0/0x65 returned 0 after 120 usecs
calling hwrng_modinit+0x0/0x7d @ 1
initcall hwrng_modinit+0x0/0x7d returned 0 after 23 usecs
calling mod_init+0x0/0x1db @ 1
initcall mod_init+0x0/0x1db returned -19 after 133 usecs
calling virtio_rng_driver_init+0x0/0x12 @ 1
initcall virtio_rng_driver_init+0x0/0x12 returned 0 after 3 usecs
calling cn_proc_init+0x0/0x36 @ 1
initcall cn_proc_init+0x0/0x36 returned 0 after 0 usecs
calling topology_sysfs_init+0x0/0x30 @ 1
initcall topology_sysfs_init+0x0/0x30 returned 0 after 26 usecs
calling cacheinfo_sysfs_init+0x0/0x2d @ 1
initcall cacheinfo_sysfs_init+0x0/0x2d returned 165 after 497 usecs
calling devcoredump_init+0x0/0x19 @ 1
initcall devcoredump_init+0x0/0x19 returned 0 after 3 usecs
calling loop_init+0x0/0x140 @ 1
loop: module loaded
initcall loop_init+0x0/0x140 returned 0 after 1273 usecs
calling init_cryptoloop+0x0/0x28 @ 1
initcall init_cryptoloop+0x0/0x28 returned 0 after 0 usecs
calling init+0x0/0x7a @ 1
initcall init+0x0/0x7a returned 0 after 14 usecs
calling raid_init+0x0/0x12 @ 1
initcall raid_init+0x0/0x12 returned 0 after 2 usecs
calling spi_transport_init+0x0/0x77 @ 1
initcall spi_transport_init+0x0/0x77 returned 0 after 5 usecs
calling fc_transport_init+0x0/0x80 @ 1
initcall fc_transport_init+0x0/0x80 returned 0 after 7 usecs
calling sas_transport_init+0x0/0xb6 @ 1
initcall sas_transport_init+0x0/0xb6 returned 0 after 11 usecs
calling sas_class_init+0x0/0x34 @ 1
initcall sas_class_init+0x0/0x34 returned 0 after 2 usecs
calling libfc_init+0x0/0x35 @ 1
initcall libfc_init+0x0/0x35 returned 0 after 63 usecs
calling blogic_init+0x0/0x1014 @ 1
initcall blogic_init+0x0/0x1014 returned 0 after 29 usecs
calling isci_init+0x0/0x68 @ 1
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
initcall isci_init+0x0/0x68 returned 0 after 18 usecs
calling hpsa_init+0x0/0x4e @ 1
initcall hpsa_init+0x0/0x4e returned 0 after 18 usecs
calling megasas_init+0x0/0x1d0 @ 1
megasas: 07.701.17.00-rc1
initcall megasas_init+0x0/0x1d0 returned 0 after 19 usecs
calling _mpt3sas_init+0x0/0x1bb @ 1
mpt3sas version 15.100.00.00 loaded
initcall _mpt3sas_init+0x0/0x1bb returned 0 after 61 usecs
calling init+0x0/0xcc @ 1
initcall init+0x0/0xcc returned 0 after 8 usecs
calling pvscsi_init+0x0/0x35 @ 1
VMware PVSCSI driver - version 1.0.7.0-k
initcall pvscsi_init+0x0/0x35 returned 0 after 13 usecs
calling storvsc_drv_init+0x0/0x79 @ 1
hv_vmbus: registering driver hv_storvsc
initcall storvsc_drv_init+0x0/0x79 returned -19 after 3 usecs
calling init_sd+0x0/0x173 @ 1
initcall init_sd+0x0/0x173 returned 0 after 10 usecs
calling init_sg+0x0/0xc1 @ 1
initcall init_sg+0x0/0xc1 returned 0 after 2 usecs
calling nvme_core_init+0x0/0x79 @ 1
initcall nvme_core_init+0x0/0x79 returned 0 after 2 usecs
calling nvme_init+0x0/0x5a @ 1
initcall nvme_init+0x0/0x5a returned 0 after 38 usecs
calling ahci_pci_driver_init+0x0/0x1b @ 1
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xfbf36000 port 0xfbf36180 irq 30
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
initcall ahci_pci_driver_init+0x0/0x1b returned 0 after 1368 usecs
calling ahci_driver_init+0x0/0x14 @ 1
initcall ahci_driver_init+0x0/0x14 returned 0 after 7 usecs
calling piix_init+0x0/0x29 @ 1
initcall piix_init+0x0/0x29 returned 0 after 27 usecs
calling sch_pci_driver_init+0x0/0x1b @ 1
initcall sch_pci_driver_init+0x0/0x1b returned 0 after 12 usecs
calling mpiix_pci_driver_init+0x0/0x1b @ 1
initcall mpiix_pci_driver_init+0x0/0x1b returned 0 after 12 usecs
calling ata_generic_pci_driver_init+0x0/0x1b @ 1
initcall ata_generic_pci_driver_init+0x0/0x1b returned 0 after 15 usecs
calling drm_kms_helper_init+0x0/0x15 @ 1
initcall drm_kms_helper_init+0x0/0x15 returned 0 after 0 usecs
calling drm_core_init+0x0/0xd8 @ 1
initcall drm_core_init+0x0/0xd8 returned 0 after 6 usecs
calling ttm_init+0x0/0x5d @ 1
initcall ttm_init+0x0/0x5d returned 0 after 8 usecs
calling i915_init+0x0/0x55 @ 1
initcall i915_init+0x0/0x55 returned 0 after 41 usecs
calling cirrus_init+0x0/0x3e @ 1
initcall cirrus_init+0x0/0x3e returned 0 after 14 usecs
calling bochs_init+0x0/0x3e @ 1
initcall bochs_init+0x0/0x3e returned 0 after 12 usecs
calling virtio_gpu_driver_init+0x0/0x12 @ 1
initcall virtio_gpu_driver_init+0x0/0x12 returned 0 after 3 usecs
calling net_olddevs_init+0x0/0x62 @ 1
initcall net_olddevs_init+0x0/0x62 returned 0 after 2 usecs
calling tun_init+0x0/0x81 @ 1
tun: Universal TUN/TAP device driver, 1.6
initcall tun_init+0x0/0x81 returned 0 after 28 usecs
calling e100_init_module+0x0/0x59 @ 1
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall e100_init_module+0x0/0x59 returned 0 after 22 usecs
calling fusion_init+0x0/0xf4 @ 1
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
initcall fusion_init+0x0/0xf4 returned 0 after 3 usecs
calling mptspi_init+0x0/0xec @ 1
Fusion MPT SPI Host driver 3.04.20
initcall mptspi_init+0x0/0xec returned 0 after 14 usecs
calling mptsas_init+0x0/0x128 @ 1
Fusion MPT SAS Host driver 3.04.20
initcall mptsas_init+0x0/0x128 returned 0 after 16 usecs
calling ehci_hcd_init+0x0/0xc1 @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
initcall ehci_hcd_init+0x0/0xc1 returned 0 after 2 usecs
calling ehci_pci_init+0x0/0x67 @ 1
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbf38000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.12.8-378.native ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfbf37000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.12.8-378.native ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
initcall ehci_pci_init+0x0/0x67 returned 0 after 21191 usecs
calling uhci_hcd_init+0x0/0x117 @ 1
uhci_hcd: USB Universal Host Controller Interface driver
initcall uhci_hcd_init+0x0/0x117 returned 0 after 20 usecs
calling xhci_hcd_init+0x0/0x14 @ 1
initcall xhci_hcd_init+0x0/0x14 returned 0 after 0 usecs
calling xhci_pci_init+0x0/0x44 @ 1
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.12.8-378.native xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.12.8-378.native xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:04:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.12.8-378.native xhci-hcd
usb usb5: SerialNumber: 0000:04:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.12.8-378.native xhci-hcd
usb usb6: SerialNumber: 0000:04:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
initcall xhci_pci_init+0x0/0x44 returned 0 after 63739 usecs
calling usb_storage_driver_init+0x0/0x30 @ 1
usbcore: registered new interface driver usb-storage
initcall usb_storage_driver_init+0x0/0x30 returned 0 after 27 usecs
calling ucsi_acpi_platform_driver_init+0x0/0x14 @ 1
initcall ucsi_acpi_platform_driver_init+0x0/0x14 returned 0 after 5 usecs
calling evdev_init+0x0/0x12 @ 1
initcall evdev_init+0x0/0x12 returned 0 after 50 usecs
calling cmos_init+0x0/0x69 @ 1
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
initcall cmos_init+0x0/0x69 returned 0 after 146 usecs
calling dw_i2c_driver_init+0x0/0x1b @ 1
initcall dw_i2c_driver_init+0x0/0x1b returned 0 after 17 usecs
calling acpi_power_meter_init+0x0/0x37 @ 1
initcall acpi_power_meter_init+0x0/0x37 returned 0 after 52 usecs
calling coretemp_init+0x0/0xb7 @ 1
initcall coretemp_init+0x0/0xb7 returned 0 after 223 usecs
calling powerclamp_init+0x0/0x21f @ 1
initcall powerclamp_init+0x0/0x21f returned 0 after 18 usecs
calling pkg_temp_thermal_init+0x0/0x11b @ 1
initcall pkg_temp_thermal_init+0x0/0x11b returned 0 after 87 usecs
calling raid0_init+0x0/0x12 @ 1
initcall raid0_init+0x0/0x12 returned 0 after 0 usecs
calling raid_init+0x0/0x12 @ 1
initcall raid_init+0x0/0x12 returned 0 after 0 usecs
calling raid_init+0x0/0x12 @ 1
initcall raid_init+0x0/0x12 returned 0 after 0 usecs
calling dm_init+0x0/0x46 @ 1
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
initcall dm_init+0x0/0x46 returned 0 after 55 usecs
calling cpufreq_gov_dbs_init+0x0/0x12 @ 1
initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 0 usecs
calling intel_pstate_init+0x0/0x36f @ 1
intel_pstate: Intel P-state driver initializing
initcall intel_pstate_init+0x0/0x36f returned 0 after 166 usecs
calling mmc_blk_init+0x0/0x79 @ 1
initcall mmc_blk_init+0x0/0x79 returned 0 after 4 usecs
calling sdhci_drv_init+0x0/0x20 @ 1
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
initcall sdhci_drv_init+0x0/0x20 returned 0 after 1 usecs
calling sdhci_driver_init+0x0/0x1b @ 1
initcall sdhci_driver_init+0x0/0x1b returned 0 after 23 usecs
calling sdhci_acpi_driver_init+0x0/0x14 @ 1
initcall sdhci_acpi_driver_init+0x0/0x14 returned 0 after 6 usecs
calling dmi_sysfs_init+0x0/0x9d @ 1
initcall dmi_sysfs_init+0x0/0x9d returned 0 after 379 usecs
calling efivars_sysfs_init+0x0/0x210 @ 1
EFI Variables Facility v0.08 2004-May-17
initcall efivars_sysfs_init+0x0/0x210 returned 0 after 4662 usecs
calling esrt_sysfs_init+0x0/0x2dd @ 1
initcall esrt_sysfs_init+0x0/0x2dd returned 0 after 13 usecs
calling efivars_pstore_init+0x0/0x9f @ 1
pstore: using zlib compression
pstore: Registered efi as persistent store backend
initcall efivars_pstore_init+0x0/0x9f returned 0 after 3 usecs
calling efibc_init+0x0/0x38 @ 1
initcall efibc_init+0x0/0x38 returned 0 after 0 usecs
calling efi_capsule_loader_init+0x0/0x3f @ 1
initcall efi_capsule_loader_init+0x0/0x3f returned 0 after 54 usecs
calling hid_init+0x0/0x5d @ 1
hidraw: raw HID events driver (C) Jiri Kosina
initcall hid_init+0x0/0x5d returned 0 after 11 usecs
calling hid_generic_init+0x0/0x1b @ 1
initcall hid_generic_init+0x0/0x1b returned 0 after 5 usecs
calling belkin_driver_init+0x0/0x1b @ 1
initcall belkin_driver_init+0x0/0x1b returned 0 after 4 usecs
calling ch_driver_init+0x0/0x1b @ 1
initcall ch_driver_init+0x0/0x1b returned 0 after 3 usecs
calling ch_driver_init+0x0/0x1b @ 1
initcall ch_driver_init+0x0/0x1b returned 0 after 4 usecs
calling holtek_kbd_driver_init+0x0/0x1b @ 1
initcall holtek_kbd_driver_init+0x0/0x1b returned 0 after 5 usecs
calling holtek_mouse_driver_init+0x0/0x1b @ 1
initcall holtek_mouse_driver_init+0x0/0x1b returned 0 after 4 usecs
calling holtek_driver_init+0x0/0x1b @ 1
initcall holtek_driver_init+0x0/0x1b returned 0 after 4 usecs
calling ks_driver_init+0x0/0x1b @ 1
initcall ks_driver_init+0x0/0x1b returned 0 after 4 usecs
calling lenovo_driver_init+0x0/0x1b @ 1
initcall lenovo_driver_init+0x0/0x1b returned 0 after 3 usecs
calling lg_driver_init+0x0/0x1b @ 1
initcall lg_driver_init+0x0/0x1b returned 0 after 4 usecs
calling ms_driver_init+0x0/0x1b @ 1
initcall ms_driver_init+0x0/0x1b returned 0 after 4 usecs
calling samsung_driver_init+0x0/0x1b @ 1
initcall samsung_driver_init+0x0/0x1b returned 0 after 4 usecs
calling hid_init+0x0/0x4a @ 1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
initcall hid_init+0x0/0x4a returned 0 after 10 usecs
calling i2c_hid_driver_init+0x0/0x14 @ 1
initcall i2c_hid_driver_init+0x0/0x14 returned 0 after 4 usecs
calling ips_pci_driver_init+0x0/0x1b @ 1
initcall ips_pci_driver_init+0x0/0x1b returned 0 after 13 usecs
calling pmc_atom_init+0x0/0x265 @ 1
initcall pmc_atom_init+0x0/0x265 returned -19 after 14 usecs
calling powercap_init+0x0/0x283 @ 1
initcall powercap_init+0x0/0x283 returned 0 after 35 usecs
calling rapl_init+0x0/0x201 @ 1
intel_rapl: Found RAPL domain package
initcall rapl_init+0x0/0x201 returned 0 after 139 usecs
calling sock_diag_init+0x0/0x35 @ 1
initcall sock_diag_init+0x0/0x35 returned 0 after 14 usecs
calling llc_init+0x0/0x20 @ 1
initcall llc_init+0x0/0x20 returned 0 after 0 usecs
calling snap_init+0x0/0x38 @ 1
initcall snap_init+0x0/0x38 returned 0 after 0 usecs
calling blackhole_init+0x0/0x12 @ 1
initcall blackhole_init+0x0/0x12 returned 0 after 0 usecs
calling cbq_module_init+0x0/0x12 @ 1
initcall cbq_module_init+0x0/0x12 returned 0 after 0 usecs
calling multiq_module_init+0x0/0x12 @ 1
initcall multiq_module_init+0x0/0x12 returned 0 after 0 usecs
calling codel_module_init+0x0/0x12 @ 1
initcall codel_module_init+0x0/0x12 returned 0 after 0 usecs
calling fq_codel_module_init+0x0/0x12 @ 1
initcall fq_codel_module_init+0x0/0x12 returned 0 after 0 usecs
calling fq_module_init+0x0/0x51 @ 1
initcall fq_module_init+0x0/0x51 returned 0 after 3 usecs
calling init_cgroup_cls+0x0/0x12 @ 1
initcall init_cgroup_cls+0x0/0x12 returned 0 after 0 usecs
calling nfnetlink_init+0x0/0x76 @ 1
Netfilter messages via NETLINK v0.30.
initcall nfnetlink_init+0x0/0x76 returned 0 after 7 usecs
calling nfnl_acct_init+0x0/0x64 @ 1
nfnl_acct: registering with nfnetlink.
initcall nfnl_acct_init+0x0/0x64 returned 0 after 0 usecs
calling nfnetlink_queue_init+0x0/0x98 @ 1
initcall nfnetlink_queue_init+0x0/0x98 returned 0 after 2 usecs
calling nfnetlink_log_init+0x0/0x9a @ 1
initcall nfnetlink_log_init+0x0/0x9a returned 0 after 1 usecs
calling xt_init+0x0/0x10e @ 1
initcall xt_init+0x0/0x10e returned 0 after 1 usecs
calling tcpudp_mt_init+0x0/0x17 @ 1
initcall tcpudp_mt_init+0x0/0x17 returned 0 after 0 usecs
calling mark_mt_init+0x0/0x3d @ 1
initcall mark_mt_init+0x0/0x3d returned 0 after 0 usecs
calling ip_set_init+0x0/0xa1 @ 1
ip_set: protocol 6
initcall ip_set_init+0x0/0xa1 returned 0 after 1 usecs
calling hash_ip_init+0x0/0x12 @ 1
initcall hash_ip_init+0x0/0x12 returned 0 after 0 usecs
calling gre_offload_init+0x0/0x49 @ 1
initcall gre_offload_init+0x0/0x49 returned 0 after 0 usecs
calling sysctl_ipv4_init+0x0/0x4c @ 1
initcall sysctl_ipv4_init+0x0/0x4c returned 0 after 50 usecs
calling bbr_register+0x0/0x12 @ 1
initcall bbr_register+0x0/0x12 returned 0 after 0 usecs
calling xfrm_user_init+0x0/0x45 @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x45 returned 0 after 2 usecs
calling inet6_init+0x0/0x351 @ 1
NET: Registered protocol family 10
Segment Routing with IPv6
initcall inet6_init+0x0/0x351 returned 0 after 293 usecs
calling packet_init+0x0/0x42 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x42 returned 0 after 2 usecs
calling packet_diag_init+0x0/0x12 @ 1
initcall packet_diag_init+0x0/0x12 returned 0 after 0 usecs
calling br_init+0x0/0xd0 @ 1
initcall br_init+0x0/0xd0 returned 0 after 5 usecs
calling br_netfilter_init+0x0/0xa9 @ 1
Bridge firewalling registered
initcall br_netfilter_init+0x0/0xa9 returned 0 after 5 usecs
calling ebtables_init+0x0/0x49 @ 1
Ebtables v2.0 registered
initcall ebtables_init+0x0/0x49 returned 0 after 0 usecs
calling ebtable_broute_init+0x0/0x23 @ 1
initcall ebtable_broute_init+0x0/0x23 returned 0 after 8 usecs
calling ebtable_filter_init+0x0/0x12 @ 1
initcall ebtable_filter_init+0x0/0x12 returned 0 after 2 usecs
calling ebtable_nat_init+0x0/0x12 @ 1
initcall ebtable_nat_init+0x0/0x12 returned 0 after 1 usecs
calling ebt_802_3_init+0x0/0x12 @ 1
initcall ebt_802_3_init+0x0/0x12 returned 0 after 0 usecs
calling ebt_among_init+0x0/0x12 @ 1
initcall ebt_among_init+0x0/0x12 returned 0 after 0 usecs
calling ebt_arp_init+0x0/0x12 @ 1
initcall ebt_arp_init+0x0/0x12 returned 0 after 0 usecs
calling ebt_ip_init+0x0/0x12 @ 1
initcall ebt_ip_init+0x0/0x12 returned 0 after 0 usecs
calling ebt_ip6_init+0x0/0x12 @ 1
initcall ebt_ip6_init+0x0/0x12 returned 0 after 0 usecs
calling ebt_limit_init+0x0/0x12 @ 1
initcall ebt_limit_init+0x0/0x12 returned 0 after 0 usecs
calling ebt_mark_m_init+0x0/0x12 @ 1
initcall ebt_mark_m_init+0x0/0x12 returned 0 after 0 usecs
calling ebt_pkttype_init+0x0/0x12 @ 1
initcall ebt_pkttype_init+0x0/0x12 returned 0 after 0 usecs
calling ebt_stp_init+0x0/0x12 @ 1
initcall ebt_stp_init+0x0/0x12 returned 0 after 0 usecs
calling ebt_vlan_init+0x0/0x2e @ 1
initcall ebt_vlan_init+0x0/0x2e returned 0 after 0 usecs
calling ebt_arpreply_init+0x0/0x12 @ 1
initcall ebt_arpreply_init+0x0/0x12 returned 0 after 0 usecs
calling ebt_mark_init+0x0/0x12 @ 1
initcall ebt_mark_init+0x0/0x12 returned 0 after 0 usecs
calling ebt_dnat_init+0x0/0x12 @ 1
initcall ebt_dnat_init+0x0/0x12 returned 0 after 0 usecs
calling ebt_redirect_init+0x0/0x12 @ 1
initcall ebt_redirect_init+0x0/0x12 returned 0 after 0 usecs
calling ebt_snat_init+0x0/0x12 @ 1
initcall ebt_snat_init+0x0/0x12 returned 0 after 0 usecs
calling ebt_log_init+0x0/0x12 @ 1
initcall ebt_log_init+0x0/0x12 returned 0 after 0 usecs
calling ebt_nflog_init+0x0/0x12 @ 1
initcall ebt_nflog_init+0x0/0x12 returned 0 after 0 usecs
calling dcbnl_init+0x0/0x4d @ 1
initcall dcbnl_init+0x0/0x4d returned 0 after 0 usecs
calling mcheck_init_device+0x0/0x136 @ 1
initcall mcheck_init_device+0x0/0x136 returned 0 after 511 usecs
calling tboot_late_init+0x0/0x28b @ 1
initcall tboot_late_init+0x0/0x28b returned 0 after 0 usecs
calling intel_rdt_late_init+0x0/0x30e @ 1
intel_rdt: Intel RDT L3 allocation detected
intel_rdt: Intel RDT L3DATA allocation detected
intel_rdt: Intel RDT L3CODE allocation detected
initcall intel_rdt_late_init+0x0/0x30e returned 0 after 253 usecs
calling mcheck_late_init+0x0/0x89 @ 1
initcall mcheck_late_init+0x0/0x89 returned 0 after 3 usecs
calling severities_debugfs_init+0x0/0x3b @ 1
initcall severities_debugfs_init+0x0/0x3b returned 0 after 0 usecs
calling threshold_init_device+0x0/0x56 @ 1
initcall threshold_init_device+0x0/0x56 returned 0 after 0 usecs
calling microcode_init+0x0/0x1d3 @ 1
microcode: sig=0x406f1, pf=0x1, revision=0xb000021
microcode: Microcode Update Driver: v2.2.
initcall microcode_init+0x0/0x1d3 returned 0 after 83 usecs
calling hpet_insert_resource+0x0/0x24 @ 1
initcall hpet_insert_resource+0x0/0x24 returned 0 after 1 usecs
calling update_mp_table+0x0/0x419 @ 1
initcall update_mp_table+0x0/0x419 returned 0 after 0 usecs
calling lapic_insert_resource+0x0/0x40 @ 1
initcall lapic_insert_resource+0x0/0x40 returned 0 after 0 usecs
calling print_ICs+0x0/0x1a5 @ 1
initcall print_ICs+0x0/0x1a5 returned 0 after 0 usecs
calling pat_memtype_list_init+0x0/0x35 @ 1
initcall pat_memtype_list_init+0x0/0x35 returned 0 after 1 usecs
calling create_tlb_single_page_flush_ceiling+0x0/0x29 @ 1
initcall create_tlb_single_page_flush_ceiling+0x0/0x29 returned 0 after 0 usecs
calling aesni_init+0x0/0x20d @ 1
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
initcall aesni_init+0x0/0x20d returned 0 after 395 usecs
calling init_oops_id+0x0/0x40 @ 1
initcall init_oops_id+0x0/0x40 returned 0 after 0 usecs
calling sched_init_debug+0x0/0x24 @ 1
initcall sched_init_debug+0x0/0x24 returned 0 after 2 usecs
calling pm_qos_power_init+0x0/0xa8 @ 1
initcall pm_qos_power_init+0x0/0xa8 returned 0 after 102 usecs
calling printk_late_init+0x0/0xa4 @ 1
initcall printk_late_init+0x0/0xa4 returned 0 after 0 usecs
calling tk_debug_sleep_time_init+0x0/0x3c @ 1
initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 0 usecs
calling taskstats_init+0x0/0x37 @ 1
registered taskstats version 1
initcall taskstats_init+0x0/0x37 returned 0 after 4 usecs
calling clear_boot_tracer+0x0/0x2e @ 1
initcall clear_boot_tracer+0x0/0x2e returned 0 after 0 usecs
calling load_system_certificate_list+0x0/0xf5 @ 1
Loading compiled-in X.509 certificates
clr: call_modprobe: crypto-pkcs1pad(rsa,sha512) 2
clr: call_modprobe: crypto-pkcs1pad(rsa,sha512)-all 2
Loaded X.509 cert 'Build time autogenerated kernel key: 78e09e9af4aede37e8a0626ae865134e0f7d6bc0'
initcall load_system_certificate_list+0x0/0xf5 returned 0 after 1174 usecs
calling fault_around_debugfs+0x0/0x35 @ 1
initcall fault_around_debugfs+0x0/0x35 returned 0 after 4 usecs
calling max_swapfiles_check+0x0/0x3 @ 1
initcall max_swapfiles_check+0x0/0x3 returned 0 after 0 usecs
calling split_huge_pages_debugfs+0x0/0x35 @ 1
initcall split_huge_pages_debugfs+0x0/0x35 returned 0 after 0 usecs
calling check_early_ioremap_leak+0x0/0x3a @ 1
initcall check_early_ioremap_leak+0x0/0x3a returned 0 after 0 usecs
calling init_btrfs_fs+0x0/0x129 @ 1
Btrfs loaded, crc32c=crc32c-intel
initcall init_btrfs_fs+0x0/0x129 returned 0 after 250 usecs
calling init_root_keyring+0x0/0xb @ 1
initcall init_root_keyring+0x0/0xb returned 0 after 5 usecs
calling prandom_reseed+0x0/0x2f @ 1
initcall prandom_reseed+0x0/0x2f returned 0 after 5 usecs
calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 0 usecs
calling pci_sysfs_init+0x0/0x55 @ 1
initcall pci_sysfs_init+0x0/0x55 returned 0 after 354 usecs
calling bert_init+0x0/0x20e @ 1
initcall bert_init+0x0/0x20e returned 0 after 0 usecs
calling clk_debug_init+0x0/0x13e @ 1
initcall clk_debug_init+0x0/0x13e returned 0 after 5 usecs
calling dmar_free_unused_resources+0x0/0xbb @ 1
initcall dmar_free_unused_resources+0x0/0xbb returned 0 after 0 usecs
calling deferred_probe_initcall+0x0/0x20 @ 1
initcall deferred_probe_initcall+0x0/0x20 returned 0 after 8 usecs
calling acpi_cpufreq_init+0x0/0x1f0 @ 1
initcall acpi_cpufreq_init+0x0/0x1f0 returned -17 after 0 usecs
calling firmware_memmap_init+0x0/0x33 @ 1
initcall firmware_memmap_init+0x0/0x33 returned 0 after 38 usecs
calling efi_shutdown_init+0x0/0x31 @ 1
initcall efi_shutdown_init+0x0/0x31 returned 0 after 0 usecs
calling itmt_legacy_init+0x0/0x56 @ 1
initcall itmt_legacy_init+0x0/0x56 returned 0 after 240 usecs
calling pci_mmcfg_late_insert_resources+0x0/0x53 @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x53 returned 0 after 0 usecs
calling tcp_congestion_default+0x0/0x12 @ 1
initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 usecs
calling clk_disable_unused+0x0/0x170 @ 1
initcall clk_disable_unused+0x0/0x170 returned 0 after 0 usecs
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
usb 1-1: new high-speed USB device number 2 using ehci-pci
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT1.SPT1._GTF] (Node ffff9040ef1700f0), AE_NOT_FOUND (20170303/psparse-543)
ata2.00: ATA-9: CORSAIR FORCE LX SSD, N0307A, max UDMA/133
ata2.00: 500118192 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170303/psargs-364)
usb 2-1: new high-speed USB device number 2 using ehci-pci
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT1.SPT1._GTF] (Node ffff9040ef1700f0), AE_NOT_FOUND (20170303/psparse-543)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA CORSAIR FORCE LX 7A PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:3.
devtmpfs: mounted
Freeing unused kernel memory: 1140K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 1380K
Freeing unused kernel memory: 1592K
random: fast init done
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL -XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=legacy)
systemd[1]: Detected architecture x86-64.
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
systemd[1]: Created slice System Slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Journal Socket.
clr: call_modprobe: net-pf-16-proto-9 2
systemd-journald[251]: Received request to flush runtime journal from PID 1
calling tpm_init+0x0/0x1000 [tpm] @ 278
initcall tpm_init+0x0/0x1000 [tpm] returned 0 after 11 usecs
calling init_tis+0x0/0x1000 [tpm_tis] @ 278
initcall init_tis+0x0/0x1000 [tpm_tis] returned 0 after 102 usecs
calling acpi_wmi_init+0x0/0x1000 [wmi] @ 282
wmi: Mapper loaded
initcall acpi_wmi_init+0x0/0x1000 [wmi] returned 0 after 185 usecs
calling i8042_init+0x0/0x6cc [i8042] @ 280
i8042: PNP: No PS/2 controller found.
initcall i8042_init+0x0/0x6cc [i8042] returned -19 after 24 usecs
calling i8042_init+0x0/0x6cc [i8042] @ 285
i8042: PNP: No PS/2 controller found.
initcall i8042_init+0x0/0x6cc [i8042] returned -19 after 23 usecs
calling i8042_init+0x0/0x6cc [i8042] @ 280
i8042: PNP: No PS/2 controller found.
initcall i8042_init+0x0/0x6cc [i8042] returned -19 after 23 usecs
calling i8042_init+0x0/0x6cc [i8042] @ 285
i8042: PNP: No PS/2 controller found.
initcall i8042_init+0x0/0x6cc [i8042] returned -19 after 30 usecs
calling shpcd_init+0x0/0x1000 [shpchp] @ 292
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
initcall shpcd_init+0x0/0x1000 [shpchp] returned 0 after 28 usecs
calling init_soundcore+0x0/0x1000 [soundcore] @ 287
initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 4 usecs
calling lpc_ich_driver_init+0x0/0x1000 [lpc_ich] @ 288
initcall lpc_ich_driver_init+0x0/0x1000 [lpc_ich] returned 0 after 108 usecs
calling alsa_sound_init+0x0/0x82 [snd] @ 280
initcall alsa_sound_init+0x0/0x82 [snd] returned 0 after 6 usecs
calling e1000_init_module+0x0/0x1000 [e1000e] @ 293
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic mode
calling alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 287
initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 1 usecs
calling hda_bus_init+0x0/0x12 [snd_hda_core] @ 280
initcall hda_bus_init+0x0/0x12 [snd_hda_core] returned 0 after 7 usecs
calling alsa_hwdep_init+0x0/0x1000 [snd_hwdep] @ 287
initcall alsa_hwdep_init+0x0/0x1000 [snd_hwdep] returned 0 after 2 usecs
calling azx_driver_init+0x0/0xfd4 [snd_hda_intel] @ 280
Adding 524284k swap on /dev/sda2. Priority:-1 extents:1 across:524284k SS
calling mxm_wmi_init+0x0/0x1000 [mxm_wmi] @ 283
initcall mxm_wmi_init+0x0/0x1000 [mxm_wmi] returned 0 after 0 usecs
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 4c:cc:6a:4d:a6:4f
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
initcall e1000_init_module+0x0/0x1000 [e1000e] returned 0 after 128945 usecs
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
initcall azx_driver_init+0x0/0xfd4 [snd_hda_intel] returned 0 after 118363 usecs
e1000e 0000:00:19.0 eno1: renamed from eth0
clr: call_modprobe: hdaudio:v1002AA01r00100200a01
2
calling hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] @ 307
initcall hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] returned 0 after 241 usecs
clr: call_modprobe: hdaudio:v10EC0892r00100302a01
2
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input2
calling generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 308
initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 10 usecs
calling realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] @ 308
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
random: crng init done
initcall realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 11872 usecs
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
tsc: Refined TSC clocksource calibration: 1699.998 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x188125786ea, max_idle_ns: 440795276273 ns
clocksource: Switched to clocksource tsc
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
python (12267): drop_caches: 3
python (12267): drop_caches: 3
python (12320): drop_caches: 3
python (12320): drop_caches: 3
python (12372): drop_caches: 3
python (12372): drop_caches: 3
python (12380): drop_caches: 3
python (12380): drop_caches: 3
python (12433): drop_caches: 3
python (12433): drop_caches: 3