dmesg - test
microcode: microcode updated early to revision 0x62, date = 2017-04-27
Linux version 4.12.5-300.fc26.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 7.1.1 20170622 (Red Hat 7.1.1-3) (GCC) ) #1 SMP Mon Aug 7 15:27:25 UTC 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000a40dcfff] usable
BIOS-e820: [mem 0x00000000a40dd000-0x00000000a40ddfff] ACPI NVS
BIOS-e820: [mem 0x00000000a40de000-0x00000000a40defff] reserved
BIOS-e820: [mem 0x00000000a40df000-0x00000000b4f9afff] usable
BIOS-e820: [mem 0x00000000b4f9b000-0x00000000b5d7efff] reserved
BIOS-e820: [mem 0x00000000b5d7f000-0x00000000b5f7efff] ACPI NVS
BIOS-e820: [mem 0x00000000b5f7f000-0x00000000b5ffefff] ACPI data
BIOS-e820: [mem 0x00000000b5fff000-0x00000000b5ffffff] usable
BIOS-e820: [mem 0x00000000b6000000-0x00000000d87fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000002257fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xa14da018-0xa14ea057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000a14da017] usable
reserve setup_data: [mem 0x00000000a14da018-0x00000000a14ea057] usable
reserve setup_data: [mem 0x00000000a14ea058-0x00000000a40dcfff] usable
reserve setup_data: [mem 0x00000000a40dd000-0x00000000a40ddfff] ACPI NVS
reserve setup_data: [mem 0x00000000a40de000-0x00000000a40defff] reserved
reserve setup_data: [mem 0x00000000a40df000-0x00000000b4f9afff] usable
reserve setup_data: [mem 0x00000000b4f9b000-0x00000000b5d7efff] reserved
reserve setup_data: [mem 0x00000000b5d7f000-0x00000000b5f7efff] ACPI NVS
reserve setup_data: [mem 0x00000000b5f7f000-0x00000000b5ffefff] ACPI data
reserve setup_data: [mem 0x00000000b5fff000-0x00000000b5ffffff] usable
reserve setup_data: [mem 0x00000000b6000000-0x00000000d87fffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000002257fffff] usable
efi: EFI v2.50 by HP
efi: ACPI=0xb5ffe000 ACPI 2.0=0xb5ffe014 SMBIOS=0xb5765000 SMBIOS 3.0=0xb5763000 MPS=0xb5ae5000 ESRT=0xb292f858 MEMATTR=0xb2371018
SMBIOS 3.0.0 present.
DMI: HP HP EliteBook 840 G4/828C, BIOS P78 Ver. 01.05 05/24/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x225800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00B8000000 mask 7FF8000000 uncachable
2 base 1C00000000 mask 7C00000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xb6000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000b292f858 to 0x00000000b292f890.
Base memory trampoline at [ffff9fb000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x15c493000, 0x15c493fff] PGTABLE
BRK [0x15c494000, 0x15c494fff] PGTABLE
BRK [0x15c495000, 0x15c495fff] PGTABLE
BRK [0x15c496000, 0x15c496fff] PGTABLE
BRK [0x15c497000, 0x15c497fff] PGTABLE
BRK [0x15c498000, 0x15c498fff] PGTABLE
BRK [0x15c499000, 0x15c499fff] PGTABLE
BRK [0x15c49a000, 0x15c49afff] PGTABLE
BRK [0x15c49b000, 0x15c49bfff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x3eb24000-0x3fffdfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000B5FFE014 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000B5FBA188 0000F4 (v01 HPQOEM SLIC-BPC 00000000 01000013)
ACPI: FACP 0x00000000B5FFD000 0000F4 (v05 HPQOEM SLIC-BPC 00000000 HP 00000001)
ACPI: DSDT 0x00000000B5FC3000 01E534 (v02 HPQOEM 828C 00000000 INTL 20160422)
ACPI: FACS 0x00000000B5F59000 000040
ACPI: SSDT 0x00000000B5FFC000 00012A (v02 HP ShmTable 00000001 INTL 20160422)
ACPI: SSDT 0x00000000B5FEF000 00C0A3 (v02 AcpiRe PLT_RTD3 00001000 INTL 20160422)
ACPI: TCPA 0x00000000B5FED000 000032 (v02 HPQOEM EDK2 00000002 01000013)
ACPI: UEFI 0x00000000B5F69000 000042 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: SSDT 0x00000000B5FEC000 0003D5 (v02 HPQOEM TcgTable 00001000 INTL 20160422)
ACPI: SSDT 0x00000000B5FE8000 003054 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x00000000B5FE7000 0005B6 (v02 Intel PerfTune 00001000 INTL 20160422)
ACPI: WSMT 0x00000000B5FE6000 000028 (v01 HPQOEM 828C 00000001 HP 00000001)
ACPI: HPET 0x00000000B5FE4000 000038 (v01 HPQOEM 828C 00000001 HP 00000001)
ACPI: APIC 0x00000000B5FE3000 0000BC (v03 HPQOEM 828C 00000001 HP 00000001)
ACPI: MCFG 0x00000000B5FE2000 00003C (v01 HPQOEM 828C 00000001 HP 00000001)
ACPI: SSDT 0x00000000B5FC2000 0001BC (v02 HPQOEM Sata0Ide 00001000 INTL 20160422)
ACPI: SSDT 0x00000000B5FC1000 000734 (v01 HPQOEM PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x00000000B5FC0000 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x00000000B5FBF000 000553 (v02 CtdpB CtdpB 00001000 INTL 20160422)
ACPI: SSDT 0x00000000B5FBE000 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x00000000B5FBD000 000346 (v01 INTEL EInkApp 00000000 INTL 20160422)
ACPI: DBGP 0x00000000B5FBC000 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x00000000B5FBB000 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: DMAR 0x00000000B5FE5000 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
ACPI: NHLT 0x00000000B5FB9000 00002D (v00 INTEL EDK2 00000002 01000013)
ACPI: ASF! 0x00000000B5FB8000 0000A0 (v32 HPQOEM UYA 00000001 TFSM 000F4240)
ACPI: FPDT 0x00000000B5FB7000 000044 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: BGRT 0x00000000B5FB6000 000038 (v01 HPQOEM EDK2 00000002 01000013)
ACPI: SSDT 0x00000000B5FEE000 0002F9 (v02 HP PwrCtlEv 00000001 INTL 20160422)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000002257fffff]
NODE_DATA(0) allocated [mem 0x2257d5000-0x2257fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000002257fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009dfff]
node 0: [mem 0x000000000009f000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000a40dcfff]
node 0: [mem 0x00000000a40df000-0x00000000b4f9afff]
node 0: [mem 0x00000000b5fff000-0x00000000b5ffffff]
node 0: [mem 0x0000000100000000-0x00000002257fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000002257fffff]
On node 0 totalpages: 1943351
DMA zone: 64 pages used for memmap
DMA zone: 1112 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 11519 pages used for memmap
DMA32 zone: 737178 pages, LIFO batch:31
Normal zone: 18784 pages used for memmap
Normal zone: 1202176 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000b8800000-0x00000000d87fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xa14da000-0xa14dafff]
PM: Registered nosave memory: [mem 0xa14ea000-0xa14eafff]
PM: Registered nosave memory: [mem 0xa40dd000-0xa40ddfff]
PM: Registered nosave memory: [mem 0xa40de000-0xa40defff]
PM: Registered nosave memory: [mem 0xb4f9b000-0xb5d7efff]
PM: Registered nosave memory: [mem 0xb5d7f000-0xb5f7efff]
PM: Registered nosave memory: [mem 0xb5f7f000-0xb5ffefff]
PM: Registered nosave memory: [mem 0xb6000000-0xd87fffff]
PM: Registered nosave memory: [mem 0xd8800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfe00ffff]
PM: Registered nosave memory: [mem 0xfe010000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
e820: [mem 0xd8800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 37 pages/cpu @ffff9fb225400000 s112088 r8192 d31272 u524288
pcpu-alloc: s112088 r8192 d31272 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1911872
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 7445720K/7773404K available (8693K kernel code, 2456K rwdata, 3692K rodata, 2160K init, 1980K bss, 327684K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 34423 entries in 135 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:524544 nr_irqs:1024 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 2700.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.00 BogoMIPS (lpj=2712000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
ACPI: 13 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 8 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x000000b5cd6000 end: 0x000000b5cf5fff
DMAR: RMRR base: 0x000000b8000000 end: 0x000000d87fffff
DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz (family: 0x6, model: 0x8e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (21712.47 BogoMIPS)
sched_clock: Marking stable (242000000, 0)->(246223443, -4223443)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xa40dd000-0xa40ddfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xb5d7f000-0xb5f7efff] (2097152 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 8:54:53, date: 08/18/17
NET: Registered protocol family 16
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 50 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FB21B877000 0006B4 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI Error: Field [CAP1] at 96 exceeds Buffer [NULL] size 64 (bits) (20170303/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB._OSC] (Node ffff9fb21d16cf50), AE_AML_BUFFER_LIMIT (20170303/psparse-543)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FB21B98F000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FB21B875000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9FB21B98AA00 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PXP] (on)
ACPI: Power Resource [WRST] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xd8800000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1fffffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x1ffe000000-0x1ffeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf0320000-0xf032ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0x1fff018000-0x1fff018fff 64bit]
pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0x1fff017000-0x1fff017fff 64bit]
pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0x1fff016000-0x1fff016fff 64bit]
pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0x1fff015000-0x1fff015fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xf0334000-0xf0335fff]
pci 0000:00:17.0: reg 0x14: [mem 0xf0337000-0xf03370ff]
pci 0000:00:17.0: reg 0x18: [io 0x3080-0x3087]
pci 0000:00:17.0: reg 0x1c: [io 0x3088-0x308b]
pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:17.0: reg 0x24: [mem 0xf0336000-0xf03367ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:9d11] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9d13] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xf0330000-0xf0333fff]
pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040380
pci 0000:00:1f.3: reg 0x10: [mem 0x1fff010000-0x1fff013fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0x1fff000000-0x1fff00ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0x1fff014000-0x1fff0140ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.6: [8086:15d8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xf0300000-0xf031ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:01:00.0: [10ec:522a] type 00 class 0xff0000
pci 0000:01:00.0: reg 0x10: [mem 0xf0200000-0xf0200fff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf0101fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:03:00.0: [144d:a804] type 00 class 0x010802
pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf0003fff 64bit]
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: PCI bridge to [bus 03]
pci 0000:00:1d.0: bridge window [mem 0xf0000000-0xf00fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x6e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xa14da018-0xa3ffffff]
e820: reserve RAM buffer [mem 0xa40dd000-0xa7ffffff]
e820: reserve RAM buffer [mem 0xb4f9b000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb6000000-0xb7ffffff]
e820: reserve RAM buffer [mem 0x225800000-0x227ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x2000-0x20fe] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs HPQ8002 PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs SYN3052 SYN0100 SYN0002 PNP0f13 (active)
system 00:07: [io 0x0200-0x023f] has been reserved
system 00:07: [mem 0xfedf0000-0xfedfffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfe031000-0xfe031fff] has been reserved
system 00:08: [mem 0xfe030008-0xfe030fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfe030000-0xfe030007] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:0a: [mem 0xd8800000-0xd881ffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp: PnP ACPI: found 12 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 15: assigned [mem 0x1c00000000-0x1c001fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:1c.0: bridge window [mem 0x1c00000000-0x1c001fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:1d.0: PCI bridge to [bus 03]
pci 0000:00:1d.0: bridge window [mem 0xf0000000-0xf00fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xd8800000-0xf7ffffff window]
pci_bus 0000:00: resource 8 [mem 0x1c00000000-0x1fffffffff window]
pci_bus 0000:00: resource 9 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
pci_bus 0000:01: resource 2 [mem 0x1c00000000-0x1c001fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:14.0: enabling device (0000 -> 0002)
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 21352K
DMAR: ACPI device "device:6b" under DMAR at fed91000 as 00:15.0
DMAR: ACPI device "device:6c" under DMAR at fed91000 as 00:15.1
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xad36c000-0xb136c000] (64MB) mapped at [ffff9fb0ad36c000-ffff9fb0b136bfff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1503046496.920:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:1c.0: AER enabled with IRQ 122
pcieport 0000:00:1c.3: AER enabled with IRQ 123
pcieport 0000:00:1d.0: AER enabled with IRQ 124
pcieport 0000:00:1c.0: Signaling PME with IRQ 122
pcieport 0000:00:1c.3: Signaling PME with IRQ 123
pcieport 0000:00:1d.0: Signaling PME with IRQ 124
pciehp 0000:00:1c.0:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x8E
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [CPUZ] (20 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [GFXZ] (0 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [EXTZ] (0 C)
thermal LNXTHERM:03: registered as thermal_zone3
ACPI: Thermal Zone [LOCZ] (24 C)
thermal LNXTHERM:04: registered as thermal_zone4
ACPI: Thermal Zone [BATZ] (26 C)
ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20170303/exoparg2-427)
ACPI Error: Method parse/execution failed [\_TZ.GETP] (Node ffff9fb21d16ed48), AE_AML_PACKAGE_LIMIT (20170303/psparse-543)
ACPI Error: Method parse/execution failed [\_TZ.CHGZ._CRT] (Node ffff9fb21d16e960), AE_AML_PACKAGE_LIMIT (20170303/psparse-543)
ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000005) is beyond end of object (length 0x5) (20170303/exoparg2-427)
ACPI Error: Method parse/execution failed [\_TZ.GETP] (Node ffff9fb21d16ed48), AE_AML_PACKAGE_LIMIT (20170303/psparse-543)
ACPI Error: Method parse/execution failed [\_TZ.CHGZ._CRT] (Node ffff9fb21d16e960), AE_AML_PACKAGE_LIMIT (20170303/psparse-543)
[Firmware Bug]: No valid trip found
thermal LNXTHERM:06: registered as thermal_zone5
ACPI: Thermal Zone [PCHZ] (0 C)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
ata1: SATA max UDMA/133 abar m2048@0xf0336000 port 0xf0336100 irq 125
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.12.5-300.fc26.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
ACPI: Battery Slot [BAT0] (battery present)
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.12.5-300.fc26.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb: port power management may be unreliable
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002)
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x806e9, pf=0x80, revision=0x62
microcode: Microcode Update Driver: v2.2.
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'Fedora kernel signing key: c59eb7bc258ea685d356097bc77d1b42d3512906'
Loaded UEFI:db cert 'Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: 1d7cf2c2b92673f69c8ee1ec7063967ab9b62bec' linked to secondary sys keyring
Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
Loaded UEFI:MokListRT cert 'Fedora Secure Boot CA: fde32599c2d61db1bf5807335d7b20e4cd963b42' linked to secondary sys keyring
zswap: loaded using pool lzo/zbud
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type big_key registered
Key type encrypted registered
Magic number: 13:103:928
rtc_cmos 00:03: setting system clock to 2017-08-18 08:54:57 UTC (1503046497)
PM: Hibernation image not present or could not be loaded.
ata1: SATA link down (SStatus 4 SControl 300)
Freeing unused kernel memory: 2160K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1532K
Freeing unused kernel memory: 404K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
usb 1-7: new full-speed USB device number 2 using xhci_hcd
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd-cryptse: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Unnecessary job for dev-mapper-luks\x2d02a96c3a\x2ddc47\x2d48ca\x2db8f6\x2d95f80b71b084.device was removed.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Timers.
systemd[1]: Created slice System Slice.
audit: type=1130 audit(1503046497.889:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503046497.893:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503046497.935:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
audit: type=1130 audit(1503046498.013:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1503046498.013:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503046498.046:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503046498.072:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503046498.080:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 1-8: new full-speed USB device number 3 using xhci_hcd
audit: type=1130 audit(1503046498.235:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
clocksource: Switched to clocksource tsc
rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
nvme nvme0: pci function 0000:03:00.0
usb 1-8: New USB device found, idVendor=138a, idProduct=003f
usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-8: SerialNumber: 00302873bb9e
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input9
usb 1-9: new high-speed USB device number 4 using xhci_hcd
random: fast init done
nvme0n1: p1 p2 p3
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) f4:30:b9:cb:4c:9f
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[drm] Memory usable by graphics device = 4096M
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
usb 1-9: New USB device found, idVendor=04ca, idProduct=7063
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9: Product: HP HD Camera
usb 1-9: Manufacturer: DFSML019I72HNQ
fbcon: inteldrmfb (fb0) is primary device
psmouse serio3: synaptics: queried max coordinates: x [..5670], y [..4758]
psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1198..]
psmouse serio3: synaptics: Your touchpad (PNP: SYN3052 SYN0100 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
psmouse serio3: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3139, fw id: 2000742
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[drm] RC6 on
random: crng init done
kauditd_printk_skb: 4 callbacks suppressed
audit: type=1130 audit(1503046505.833:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-cryptsetup@luks\x2d02a96c3a\x2ddc47\x2d48ca\x2db8f6\x2d95f80b71b084 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503046505.931:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503046505.947:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1503046506.020:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1503046506.020:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503046506.151:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1503046506.160:21): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503046506.161:22): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1503046506.161:23): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1503046506.162:24): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[202]: Received SIGTERM from PID 1 (systemd).
systemd: 19 output lines suppressed due to ratelimiting
SELinux: 32768 avtab hash slots, 108182 rules.
SELinux: 32768 avtab hash slots, 108182 rules.
SELinux: 8 users, 14 roles, 5108 types, 315 bools, 1 sens, 1024 cats
SELinux: 94 classes, 108182 rules
SELinux: Permission getrlimit in class process not defined in policy.
SELinux: Class sctp_socket not defined in policy.
SELinux: Class icmp_socket not defined in policy.
SELinux: Class ax25_socket not defined in policy.
SELinux: Class ipx_socket not defined in policy.
SELinux: Class netrom_socket not defined in policy.
SELinux: Class atmpvc_socket not defined in policy.
SELinux: Class x25_socket not defined in policy.
SELinux: Class rose_socket not defined in policy.
SELinux: Class decnet_socket not defined in policy.
SELinux: Class atmsvc_socket not defined in policy.
SELinux: Class rds_socket not defined in policy.
SELinux: Class irda_socket not defined in policy.
SELinux: Class pppox_socket not defined in policy.
SELinux: Class llc_socket not defined in policy.
SELinux: Class can_socket not defined in policy.
SELinux: Class tipc_socket not defined in policy.
SELinux: Class bluetooth_socket not defined in policy.
SELinux: Class iucv_socket not defined in policy.
SELinux: Class rxrpc_socket not defined in policy.
SELinux: Class isdn_socket not defined in policy.
SELinux: Class phonet_socket not defined in policy.
SELinux: Class ieee802154_socket not defined in policy.
SELinux: Class caif_socket not defined in policy.
SELinux: Class alg_socket not defined in policy.
SELinux: Class nfc_socket not defined in policy.
SELinux: Class vsock_socket not defined in policy.
SELinux: Class kcm_socket not defined in policy.
SELinux: Class qipcrtr_socket not defined in policy.
SELinux: Class smc_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
systemd[1]: Successfully loaded SELinux policy in 80.575ms.
systemd[1]: Relabelled /dev and /run in 12.595ms.
EXT4-fs (dm-1): re-mounted. Opts: (null)
systemd-journald[722]: Received request to flush runtime journal from PID 1
input: HP Wireless hotkeys as /devices/virtual/input/input13
hp_accel: hardware type HPB64xx found
tpm_tis 00:0b: 1.2 TPM (device-id 0x1B, rev-id 16)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
wmi: Mapper loaded
lis3lv02d: 8 bits 3DC sensor found
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
Bluetooth: hci0: Device revision is 16
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
idma64 idma64.0: Found Intel integrated DMA 64-bit
media: Linux media interface: v0.10
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
Linux video capture interface: v2.00
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
uvcvideo: Found UVC 1.00 device HP HD Camera (04ca:7063)
uvcvideo 1-9:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-9:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-9:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-9:1.0: Entity type for entity Camera 1 was not initialized!
input: HP HD Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-30.ucode failed with error -2
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-29.ucode failed with error -2
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8265-28.ucode failed with error -2
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
iwlwifi 0000:02:00.0: capa flags index 3 larger than supported by driver
iwlwifi 0000:02:00.0: loaded firmware version 27.455470.0 op_mode iwlmvm
snd_hda_codec_conexant hdaudioC0D0: CX8200: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX8200: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC0D0: inputs:
snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
Adding 8183804k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:8183804k SSFS
ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9fb20c75fa20 (20170303/exresop-593)
ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170303/dswexec-461)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9fb21d12a640), AE_AML_OPERAND_TYPE (20170303/psparse-543)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9fb21d12ac58), AE_AML_OPERAND_TYPE (20170303/psparse-543)
ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9fb20c75f9d8 (20170303/exresop-593)
ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170303/dswexec-461)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9fb21d12a640), AE_AML_OPERAND_TYPE (20170303/psparse-543)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9fb21d12ac58), AE_AML_OPERAND_TYPE (20170303/psparse-543)
ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff9fb20c75f8b8 (20170303/exresop-593)
ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170303/dswexec-461)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPO] (Node ffff9fb21d12a640), AE_AML_OPERAND_TYPE (20170303/psparse-543)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9fb21d12ac58), AE_AML_OPERAND_TYPE (20170303/psparse-543)
input: HP WMI hotkeys as /devices/virtual/input/input22
ACPI Error: Attempt to CreateField of length zero (20170303/dsopcode-168)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WVPI] (Node ffff9fb21d12a2d0), AE_AML_OPERAND_VALUE (20170303/psparse-543)
ACPI Error: Method parse/execution failed [\_SB.WMIV.WMPV] (Node ffff9fb21d12ac58), AE_AML_OPERAND_VALUE (20170303/psparse-543)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal thermal_zone8: failed to read out thermal zone (-5)
iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input23
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1414751 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 11838 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
tun: Universal TUN/TAP device driver, 1.6
virbr1: port 1(virbr1-nic) entered blocking state
virbr1: port 1(virbr1-nic) entered disabled state
device virbr1-nic entered promiscuous mode
virbr1: port 1(virbr1-nic) entered blocking state
virbr1: port 1(virbr1-nic) entered listening state
virbr1: port 1(virbr1-nic) entered disabled state
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with c0:7c:d1:19:90:37
wlp2s0: send auth to c0:7c:d1:19:90:37 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with c0:7c:d1:19:90:37 (try 1/3)
wlp2s0: RX AssocResp from c0:7c:d1:19:90:37 (capab=0x1411 status=0 aid=2)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
Bridge firewalling registered
ctnetlink v0.93: registering with nfnetlink.
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
fuse init (API version 7.26)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
docker0: port 1(vethd2c6f44) entered blocking state
docker0: port 1(vethd2c6f44) entered disabled state
device vethd2c6f44 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethd2c6f44: link is not ready
eth0: renamed from veth6e5e4ba
IPv6: ADDRCONF(NETDEV_CHANGE): vethd2c6f44: link becomes ready
docker0: port 1(vethd2c6f44) entered blocking state
docker0: port 1(vethd2c6f44) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
veth6e5e4ba: renamed from eth0
docker0: port 1(vethd2c6f44) entered disabled state
docker0: port 1(vethd2c6f44) entered disabled state
device vethd2c6f44 left promiscuous mode
docker0: port 1(vethd2c6f44) entered disabled state