dmesg - RANDOm
microcode: microcode updated early to revision 0x29, date = 2013-06-12
Linux version 4.10.0-32-generic (buildd@lcy01-05) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #36-Ubuntu SMP Tue Aug 8 12:10:06 UTC 2017 (Ubuntu 4.10.0-32.36-generic 4.10.17)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000caf7ffff] usable
BIOS-e820: [mem 0x00000000caf80000-0x00000000cafa2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cafa3000-0x00000000cafdffff] ACPI data
BIOS-e820: [mem 0x00000000cafe0000-0x00000000caffffff] reserved
BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. Z68AP-D3/Z68AP-D3, BIOS FB 10/12/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x42fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CDFFF write-protect
CE000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 0D0000000 mask FF0000000 uncachable
3 base 0CC000000 mask FFC000000 uncachable
4 base 0CB800000 mask FFF800000 uncachable
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask E00000000 write-back
7 base 300000000 mask F00000000 write-back
8 base 400000000 mask FC0000000 write-back
9 base 430000000 mask FF0000000 uncachable
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
total RAM covered: 16312M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 9 lose cover RAM: 0G
e820: update [mem 0xcb800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcaf80 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5ba0-0x000f5baf] mapped at [ffff8def400f5ba0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8def40099000] 99000 size 24576
reserving inaccessible SNB gfx pages
BRK [0x12e2a000, 0x12e2afff] PGTABLE
BRK [0x12e2b000, 0x12e2bfff] PGTABLE
BRK [0x12e2c000, 0x12e2cfff] PGTABLE
BRK [0x12e2d000, 0x12e2dfff] PGTABLE
BRK [0x12e2e000, 0x12e2efff] PGTABLE
BRK [0x12e2f000, 0x12e2ffff] PGTABLE
BRK [0x12e30000, 0x12e30fff] PGTABLE
BRK [0x12e31000, 0x12e31fff] PGTABLE
BRK [0x12e32000, 0x12e32fff] PGTABLE
BRK [0x12e33000, 0x12e33fff] PGTABLE
BRK [0x12e34000, 0x12e34fff] PGTABLE
BRK [0x12e35000, 0x12e35fff] PGTABLE
RAMDISK: [mem 0x31e2f000-0x34f0efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7790 000014 (v00 GBT )
ACPI: RSDT 0x00000000CAFA3040 000050 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000CAFA3100 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000CAFA31C0 00503A (v01 GBT GBTUACPI 00001000 MSFT 04000000)
ACPI: FACS 0x00000000CAF80000 000040
ACPI: MSDM 0x00000000CAFA8340 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 0x00000000CAFA8400 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000CAFA8480 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: ASPT 0x00000000CAFA8600 000034 (v07 GBT PerfTune 312E3042 UTBG 01010101)
ACPI: SSPT 0x00000000CAFA8640 002380 (v01 GBT SsptHead 312E3042 UTBG 01010101)
ACPI: EUDS 0x00000000CAFAA9C0 0000C0 (v01 GBT 00000000 00000000)
ACPI: TAMG 0x00000000CAFAAA80 000A82 (v01 GBT GBT B0 5455312E BG?? 53450101)
ACPI: APIC 0x00000000CAFA8240 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 0x00000000CAFAB540 001F4C (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: MATS 0x00000000CAFAD4C0 00A768 (v01 MATS RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042fdfffff]
NODE_DATA(0) allocated [mem 0x42fdcc000-0x42fdf6fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000042fdfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000caf7ffff]
node 0: [mem 0x0000000100000000-0x000000042fdfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000042fdfffff]
On node 0 totalpages: 4173086
DMA zone: 64 pages used for memmap
DMA zone: 158 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12926 pages used for memmap
DMA32 zone: 827264 pages, LIFO batch:31
Normal zone: 52216 pages used for memmap
Normal zone: 3341824 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcaf80000-0xcafa2fff]
PM: Registered nosave memory: [mem 0xcafa3000-0xcafdffff]
PM: Registered nosave memory: [mem 0xcafe0000-0xcaffffff]
PM: Registered nosave memory: [mem 0xcb000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xcb000000-0xf3ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff8df36fa00000 s107992 r8192 d31272 u262144
pcpu-alloc: s107992 r8192 d31272 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4107722
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16291432K/16692344K available (9083K kernel code, 1666K rwdata, 3816K rodata, 2232K init, 2364K bss, 400912K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:524544 nr_irqs:488 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3292.461 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6584.92 BogoMIPS (lpj=13169844)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 36K
ftrace: allocating 34182 entries in 134 pages
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (26339.68 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcaf80000-0xcafa2fff] (143360 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 4:59:19, date: 08/15/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-3f]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0112] type 00 class 0x038000
pci 0000:00:02.0: reg 0x10: [mem 0xfb800000-0xfbbfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xff00-0xff3f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbfff000-0xfbfff00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
pci 0000:00:1f.2: reg 0x14: [io 0xfd00-0xfd03]
pci 0000:00:1f.2: reg 0x18: [io 0xfc00-0xfc07]
pci 0000:00:1f.2: reg 0x1c: [io 0xfb00-0xfb03]
pci 0000:00:1f.2: reg 0x20: [io 0xfa00-0xfa0f]
pci 0000:00:1f.2: reg 0x24: [io 0xf900-0xf90f]
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf700-0xf707]
pci 0000:00:1f.5: reg 0x14: [io 0xf600-0xf603]
pci 0000:00:1f.5: reg 0x18: [io 0xf500-0xf507]
pci 0000:00:1f.5: reg 0x1c: [io 0xf400-0xf403]
pci 0000:00:1f.5: reg 0x20: [io 0xf300-0xf30f]
pci 0000:00:1f.5: reg 0x24: [io 0xf200-0xf20f]
pci 0000:01:00.0: [10de:100a] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf9000000-0xf9ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xee000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xdf00-0xdf7f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0e1a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfaffc000-0xfaffffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xf9000000-0xfaffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfbdf8000-0xfbdfffff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xee00-0xeeff]
pci 0000:04:00.0: reg 0x18: [mem 0xfbcff000-0xfbcfffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xfbcf8000-0xfbcfbfff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbc00000-0xfbcfffff 64bit pref]
pci 0000:05:00.0: [1283:8892] type 01 class 0x060401
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 05-06] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xcfa00000-0xfebfffff window] (subtractive decode)
pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:05:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:05:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
pci 0000:05:00.0: bridge window [mem 0xcfa00000-0xfebfffff window] (subtractive decode)
pci 0000:07:00.0: [168c:0030] type 00 class 0x028000
pci 0000:07:00.0: reg 0x10: [mem 0xfbec0000-0xfbedffff 64bit]
pci 0000:07:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:07:00.0: supports D1
pci 0000:07:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xfbe00000-0xfbefffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcaf80000-0xcbffffff]
e820: reserve RAM buffer [mem 0x42fe00000-0x42fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x0805] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:04: [io 0x0400-0x04cf] has been reserved
system 00:04: [io 0x04d2-0x04ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x1000-0x107f] has been reserved
system 00:05: [io 0x1080-0x10ff] has been reserved
system 00:05: [io 0x1100-0x117f] has been reserved
system 00:05: [io 0x1180-0x11ff] has been reserved
system 00:05: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x000cea00-0x000cffff] has been reserved
system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:08: [mem 0xcaf80000-0xcafdffff] could not be reserved
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x00100000-0xcaf7ffff] could not be reserved
system 00:08: [mem 0xcafe0000-0xcaffffff] has been reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:08: [mem 0xfed20000-0xfed8ffff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
system 00:08: [mem 0x000e0000-0x000effff] has been reserved
system 00:08: [mem 0x20000000-0x201fffff] could not be reserved
system 00:08: [mem 0x40000000-0x400fffff] could not be reserved
system 00:08: [mem 0xcb000000-0xcf9fffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xcfa00000-0xcfbfffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xcfc00000-0xcfdfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa07ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xf9000000-0xfaffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xcfa00000-0xcfbfffff]
pci 0000:00:1c.0: bridge window [mem 0xcfc00000-0xcfdfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.2: bridge window [mem 0xfbc00000-0xfbcfffff 64bit pref]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:00:1c.3: PCI bridge to [bus 05-06]
pci 0000:07:00.0: BAR 6: assigned [mem 0xfbe00000-0xfbe0ffff pref]
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: resource 9 [mem 0xcfa00000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xf9000000-0xfaffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xcfa00000-0xcfbfffff]
pci_bus 0000:02: resource 2 [mem 0xcfc00000-0xcfdfffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 2 [mem 0xfbc00000-0xfbcfffff 64bit pref]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:05: resource 9 [mem 0xcfa00000-0xfebfffff window]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:06: resource 9 [mem 0xcfa00000-0xfebfffff window]
pci_bus 0000:07: resource 1 [mem 0xfbe00000-0xfbefffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 4 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 50048K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc6f80000-0xcaf80000] (64MB) mapped at [ffff8df006f80000-ffff8df00af7ffff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1502773159.764:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xef000000, mapped to 0xffffb2e2c2000000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 19
ata2: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
ata4: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-32-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.10.0-32-generic xhci-hcd
usb usb3: SerialNumber: 0000:03:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.10.0-32-generic xhci-hcd
usb usb4: SerialNumber: 0000:03:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high-speed USB device number 2 using ehci-pci
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x206a7, pf=0x2, revision=0x29
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: cb5b018934adee4454c39338805827a09e183084'
zswap: loaded using pool lzo/zbud
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: new low-speed USB device number 2 using xhci_hcd
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 13:4:970
rtc_cmos 00:01: setting system clock to 2017-08-15 04:59:20 UTC (1502773160)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-1: New USB device found, idVendor=046d, idProduct=c326
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Keyboard
usb 3-1: Manufacturer: Logitech
usb 3-2: new full-speed USB device number 3 using xhci_hcd
ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: ATA-10: Crucial_CT525MX300SSD1, M0CR031, max UDMA/133
ata2.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: supports DRM functions and may not be fully accessible
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA Crucial_CT525MX3 R031 PQ: 0 ANSI: 5
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-2: New USB device found, idVendor=046d, idProduct=c537
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Receiver
usb 3-2: Manufacturer: Logitech
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: Enabling discard_zeroes_data
sdb: sdb1 < sdb5 >
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 2232K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1140K
Freeing unused kernel memory: 280K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0xffffb2e2c18b1000, 50:e5:49:e1:2f:50, XID 0c900800 IRQ 26
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[drm] Initialized
hidraw: raw HID events driver (C) Jiri Kosina
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
Floppy drive(s): fd0 is unknown type 13 (usb?), fd1 is unknown type 13 (usb?)
nvidia-nvlink: Nvlink Core is being initialized, major device number 246
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 381.22 Thu May 4 00:55:03 PDT 2017 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 381.22 Thu May 4 00:21:48 PDT 2017
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Memory usable by graphics device = 2048M
checking generic (ef000000 130000) vs hw (d0000000 10000000)
[drm] Replacing VGA console driver
[drm:i915_gem_init_stolen [i915]] *ERROR* conflict detected with stolen region: [0xcba00000 - 0xcfa00000]
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1c.1/0000:03:00.0/usb3/3-1/3-1:1.0/0003:046D:C326.0001/input/input3
[drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 1
tsc: Refined TSC clocksource calibration: 3292.520 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b1eac7a, max_idle_ns: 440795210882 ns
hid-generic 0003:046D:C326.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:03:00.0-1/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1c.1/0000:03:00.0/usb3/3-1/3-1:1.1/0003:046D:C326.0002/input/input4
hid-generic 0003:046D:C326.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:03:00.0-1/input1
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1c.1/0000:03:00.0/usb3/3-2/3-2:1.0/0003:046D:C537.0003/input/input5
hid-generic 0003:046D:C537.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:03:00.0-2/input0
checking generic (ef000000 130000) vs hw (d0000000 10000000)
i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1c.1/0000:03:00.0/usb3/3-2/3-2:1.1/0003:046D:C537.0004/input/input6
hid-generic 0003:046D:C537.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:03:00.0-2/input1
clocksource: Switched to clocksource tsc
floppy0: no floppy controllers found
work still pending
raid6: sse2x1 gen() 9491 MB/s
raid6: sse2x1 xor() 7399 MB/s
raid6: sse2x2 gen() 11913 MB/s
raid6: sse2x2 xor() 8611 MB/s
raid6: sse2x4 gen() 13856 MB/s
raid6: sse2x4 xor() 10461 MB/s
raid6: using algorithm sse2x4 gen() 13856 MB/s
raid6: .... xor() 10461 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
random: fast init done
BTRFS: device label SSDer devid 1 transid 7182 /dev/sdb5
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: cgproxy.service: Cannot add dependency job, ignoring: Unit cgproxy.service is masked.
systemd[1]: ofono.service: Cannot add dependency job, ignoring: Unit ofono.service is masked.
systemd[1]: cgmanager.service: Cannot add dependency job, ignoring: Unit cgmanager.service is masked.
systemd[1]: ubuntu-fan.service: Cannot add dependency job, ignoring: Unit ubuntu-fan.service is masked.
systemd[1]: urfkill.service: Cannot add dependency job, ignoring: Unit urfkill.service is masked.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on LVM2 poll daemon socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:03: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
lp0: using parport0 (interrupt-driven).
EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
it87: Found IT8728F chip at 0x290, revision 1
it87: Beeping is supported
systemd-journald[344]: Received request to flush runtime journal from PID 1
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Floppy drive(s): fd0 is unknown type 13 (usb?), fd1 is unknown type 13 (usb?)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 243
audit: type=1400 audit(1502773170.837:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=705 comm="apparmor_parser"
audit: type=1400 audit(1502773170.837:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=704 comm="apparmor_parser"
audit: type=1400 audit(1502773170.845:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=706 comm="apparmor_parser"
audit: type=1400 audit(1502773170.877:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2312/usr/lib/snapd/snap-confine" pid=735 comm="apparmor_parser"
audit: type=1400 audit(1502773170.877:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2312/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=735 comm="apparmor_parser"
audit: type=1400 audit(1502773170.877:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2381/usr/lib/snapd/snap-confine" pid=736 comm="apparmor_parser"
audit: type=1400 audit(1502773170.877:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2381/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=736 comm="apparmor_parser"
audit: type=1400 audit(1502773170.913:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=734 comm="apparmor_parser"
audit: type=1400 audit(1502773170.913:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=734 comm="apparmor_parser"
audit: type=1400 audit(1502773170.913:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=734 comm="apparmor_parser"
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
ath: EEPROM regdomain: 0x21
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: AU
ath: Regpair used: 0x21
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffb2e2c2a40000, irq=19
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
BTRFS info (device sdb5): disk space caching is enabled
BTRFS info (device sdb5): has skinny extents
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
gpio_ich: GPIO from 436 to 511 on gpio_ich
BTRFS info (device sdb5): detected SSD devices, enabling SSD mode
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
Adding 8302588k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:8302588k SSFS
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3292519864 Hz
vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000)
floppy0: no floppy controllers found
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
nvidia-modeset: Allocated GPU:0 (GPU-d86402a0-4f53-8573-98c2-40295039d16c) @ PCI:0000:01:00.0
Ebtables v2.0 registered
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:04:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
random: crng init done
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
aufs 4.x-rcN-20170206
Bridge firewalling registered
Initializing XFRM netlink socket
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): br-bffd25f9761c: link is not ready
aufs au_opts_verify:1585:dockerd[2894]: dirperm1 breaks the protection by the permission bits on the lower branch
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 70:9f:2d:ae:ab:7c
wlan0: send auth to 70:9f:2d:ae:ab:7c (try 1/3)
wlan0: authenticated
wlan0: associate with 70:9f:2d:ae:ab:7c (try 1/3)
wlan0: RX AssocResp from 70:9f:2d:ae:ab:7c (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from 70:9f:2d:ae:ab:7c by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 70:9f:2d:ae:ab:7c
wlan0: send auth to 70:9f:2d:ae:ab:7c (try 1/3)
wlan0: authenticated
wlan0: associate with 70:9f:2d:ae:ab:7c (try 1/3)
wlan0: RX AssocResp from 70:9f:2d:ae:ab:7c (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: deauthenticating from 70:9f:2d:ae:ab:7c by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 70:9f:2d:ae:ab:7c
wlan0: send auth to 70:9f:2d:ae:ab:7c (try 1/3)
wlan0: authenticated
kauditd_printk_skb: 45 callbacks suppressed
audit: type=1400 audit(1502773241.041:57): apparmor="DENIED" operation="sendmsg" profile="/usr/lib/telepathy/telepathy-*" name="/run/systemd/journal/socket" pid=4046 comm="telepathy-haze" requested_mask="w" denied_mask="w" fsuid=1000 ouid=0
wlan0: aborting authentication with 70:9f:2d:ae:ab:7c by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with 70:9f:2d:ae:ab:7c
wlan0: send auth to 70:9f:2d:ae:ab:7c (try 1/3)
wlan0: authenticated
wlan0: aborting authentication with 70:9f:2d:ae:ab:7c by local choice (Reason: 3=DEAUTH_LEAVING)
wlan0: authenticate with 70:9f:2d:ae:ab:7c
wlan0: send auth to 70:9f:2d:ae:ab:7c (try 1/3)
wlan0: authenticated
wlan0: aborting authentication with 70:9f:2d:ae:ab:7c by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 70:9f:2d:ae:ab:7c
wlan0: send auth to 70:9f:2d:ae:ab:7c (try 1/3)
wlan0: authenticated
wlan0: associate with 70:9f:2d:ae:ab:7c (try 1/3)
wlan0: RX AssocResp from 70:9f:2d:ae:ab:7c (capab=0x411 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3133 > 3130), lowering kernel.perf_event_max_sample_rate to 63750