dmesg - Stock
random: get_random_bytes called from start_kernel+0x42/0x46e with crng_init=0
Linux version 4.13.0-999-generic (kernel@gomeisa) (gcc version 6.3.0 20170618 (Ubuntu 6.3.0-19ubuntu1)) #201707302201 SMP Mon Jul 31 02:02:48 UTC 2017
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000004e444fff] usable
BIOS-e820: [mem 0x000000004e445000-0x000000004e445fff] ACPI NVS
BIOS-e820: [mem 0x000000004e446000-0x000000004e446fff] reserved
BIOS-e820: [mem 0x000000004e447000-0x000000005b21ffff] usable
BIOS-e820: [mem 0x000000005b220000-0x000000005d5a2fff] reserved
BIOS-e820: [mem 0x000000005d5a3000-0x000000005d62cfff] ACPI data
BIOS-e820: [mem 0x000000005d62d000-0x000000005e6adfff] ACPI NVS
BIOS-e820: [mem 0x000000005e6ae000-0x000000005fabffff] reserved
BIOS-e820: [mem 0x000000005fac0000-0x000000005fba1fff] type 20
BIOS-e820: [mem 0x000000005fba2000-0x000000005fbfffff] usable
BIOS-e820: [mem 0x000000005fc00000-0x000000006fffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000049effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0x5d5f8000 ACPI=0x5d5f8000 SMBIOS=0x5fa2f000 SMBIOS 3.0=0x5fa2e000 MPS=0xfcb20 ESRT=0x58e34118 MEMATTR=0x58f5d018
random: fast init done
SMBIOS 3.0.0 present.
DMI: System manufacturer System Product Name/PRIME X299-A, BIOS 0218 06/01/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x49f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 0060000000 mask 7FE0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x5fc00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcdd0-0x000fcddf] mapped at [ffff99e3c00fcdd0]
esrt: Reserving ESRT space from 0x0000000058e34118 to 0x0000000058e34150.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff99e3c0095000] 95000 size 24576
Using GB pages for direct mapping
BRK [0x2e524000, 0x2e524fff] PGTABLE
BRK [0x2e525000, 0x2e525fff] PGTABLE
BRK [0x2e526000, 0x2e526fff] PGTABLE
BRK [0x2e527000, 0x2e527fff] PGTABLE
BRK [0x2e528000, 0x2e528fff] PGTABLE
BRK [0x2e529000, 0x2e529fff] PGTABLE
BRK [0x2e52a000, 0x2e52afff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x330cc000-0x3585dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000005D5F8000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000005D5F80A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000005D620B98 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000005D5F8210 028988 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000005E6ACF00 000040
ACPI: FPDT 0x000000005D620CB0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000005D620CF8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: WSMT 0x000000005D62C588 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000005D620DF0 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000005D621198 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000005D6242F0 0025D9 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x000000005D6268D0 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: APIC 0x000000005D626908 0000BC (v03 INTEL KBL 00000001 MSFT 0000005F)
ACPI: MCFG 0x000000005D6269C8 00003C (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000005D626A08 000E3B (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x000000005D627848 0008D6 (v02 INTEL xh_bsf 00000000 INTL 20160422)
ACPI: UEFI 0x000000005D628120 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x000000005D628168 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000005D629048 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: WDAT 0x000000005D6290E0 000134 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000005D629218 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000005D6294B8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x000000005D62C4C0 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000005D62C4F8 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: BGRT 0x000000005D62C550 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000049effffff]
NODE_DATA(0) allocated [mem 0x49efd3000-0x49effdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000049effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000004e444fff]
node 0: [mem 0x000000004e447000-0x000000005b21ffff]
node 0: [mem 0x000000005fba2000-0x000000005fbfffff]
node 0: [mem 0x0000000100000000-0x000000049effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000049effffff]
On node 0 totalpages: 4170265
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 5770 pages used for memmap
DMA32 zone: 369276 pages, LIFO batch:31
Normal zone: 59328 pages used for memmap
Normal zone: 3796992 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x4e445000-0x4e445fff]
PM: Registered nosave memory: [mem 0x4e446000-0x4e446fff]
PM: Registered nosave memory: [mem 0x5b220000-0x5d5a2fff]
PM: Registered nosave memory: [mem 0x5d5a3000-0x5d62cfff]
PM: Registered nosave memory: [mem 0x5d62d000-0x5e6adfff]
PM: Registered nosave memory: [mem 0x5e6ae000-0x5fabffff]
PM: Registered nosave memory: [mem 0x5fac0000-0x5fba1fff]
PM: Registered nosave memory: [mem 0x5fc00000-0x6fffffff]
PM: Registered nosave memory: [mem 0x70000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x70000000-0xfdffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 39 pages/cpu @ffff99e85ec00000 s119640 r8192 d31912 u262144
pcpu-alloc: s119640 r8192 d31912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4105076
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16069296K/16681060K available (9249K kernel code, 2480K rwdata, 4044K rodata, 2320K init, 2388K bss, 611764K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 37524 entries in 147 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 4300.000 MHz processor
[Firmware Bug]: TSC ADJUST: CPU0: -612198274 force to 0
Calibrating delay loop (skipped), value calculated using timer frequency.. 8592.00 BogoMIPS (lpj=17184000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170531/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170531/psobject-252)
ACPI Exception: AE_NOT_FOUND, (SSDT: xh_bsf) while loading table (20170531/tbxfload-228)
ACPI Error: 1 table load failures, 8 successful (20170531/tbxfload-246)
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 2
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-7740K CPU @ 4.30GHz (family: 0x6, model: 0x9e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
[Firmware Bug]: TSC ADJUST differs: Reference CPU0: -612198274 CPU1: 0
#2
[Firmware Bug]: TSC ADJUST differs: Reference CPU0: -612198274 CPU2: 0
#3
[Firmware Bug]: TSC ADJUST differs: Reference CPU0: -612198274 CPU3: 0
#4
[Firmware Bug]: TSC ADJUST differs: Reference CPU0: -612198274 CPU4: 0
#5
[Firmware Bug]: TSC ADJUST differs: Reference CPU0: -612198274 CPU5: 0
#6
[Firmware Bug]: TSC ADJUST differs: Reference CPU0: -612198274 CPU6: 0
#7
[Firmware Bug]: TSC ADJUST differs: Reference CPU0: -612198274 CPU7: 0
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (68744.14 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x4e445000-0x4e445fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x5d62d000-0x5e6adfff] (17305600 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 13:07:26, date: 08/07/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x60000000-0x6fffffff] (base 0x60000000)
PCI: MMCONFIG at [mem 0x60000000-0x6fffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 34 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF99E84E133000 000840 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF99E84BC51C00 000130 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF99E84BC53600 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF99E84BC4B800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF99E84BC52400 000197 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x70000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfbf30000-0xfbf3ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xfbf4e000-0xfbf4efff 64bit]
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbf4d000-0xfbf4dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xfbf48000-0xfbf49fff]
pci 0000:00:17.0: reg 0x14: [mem 0xfbf4c000-0xfbf4c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xfbf4b000-0xfbf4b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400
pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:a296] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a2d2] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xfbf44000-0xfbf47fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xfbf40000-0xfbf43fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xfbf20000-0xfbf2ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xfbf4a000-0xfbf4a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xfbf00000-0xfbf1ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [1002:7300] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xfbe00000-0xfbe3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xfbe40000-0xfbe5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.1: [1002:aae8] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfbe60000-0xfbe63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [144d:a802] type 00 class 0x010802
pci 0000:03:00.0: reg 0x10: [mem 0xfbd10000-0xfbd13fff 64bit]
pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x30: [mem 0xfbd00000-0xfbd0ffff pref]
pci 0000:00:1b.4: PCI bridge to [bus 03]
pci 0000:00:1b.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1b.4: bridge window [mem 0xfbd00000-0xfbdfffff]
acpiphp: Slot [1-1] registered
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfbc00000-0xfbc07fff 64bit]
pci 0000:05:00.0: PME# supported from D0
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:06:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfbb00000-0xfbb07fff 64bit]
pci 0000:06:00.0: PME# supported from D0
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [mem 0xfbb00000-0xfbbfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x4e445000-0x4fffffff]
e820: reserve RAM buffer [mem 0x5b220000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5fc00000-0x5fffffff]
e820: reserve RAM buffer [mem 0x49f000000-0x49fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0x60000000-0x6fffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xfbfe0000-0xfbffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] could not be reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.4: PCI bridge to [bus 03]
pci 0000:00:1b.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1b.4: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x70000000-0xfbffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:06: resource 1 [mem 0xfbb00000-0xfbbfffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 40520K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x482c6000-0x4c2c6000] (64MB) mapped at [ffff99e4082c6000-ffff99e40c2c5fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3deca0b3b47, max_idle_ns: 440795250112 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1502111246.081:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.0-999-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.0-999-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:05:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.13.0-999-generic xhci-hcd
usb usb3: SerialNumber: 0000:05:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.13.0-999-generic xhci-hcd
usb usb4: SerialNumber: 0000:05:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000010
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.13.0-999-generic xhci-hcd
usb usb5: SerialNumber: 0000:06:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.13.0-999-generic xhci-hcd
usb usb6: SerialNumber: 0000:06:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906e9, pf=0x2, revision=0x5e
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1368319735, 0)->(1389476381, -21156646)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 016323ff50247ed1098eee6942f86648c70a8f86'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 13:978:128
acpi PNP0C02:00: hash matches
acpi device:03: hash matches
rtc_cmos 00:04: setting system clock to 2017-08-07 13:07:27 UTC (1502111247)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2320K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 980K
Freeing unused kernel memory: 52K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
hidraw: raw HID events driver (C) Jiri Kosina
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
nvme nvme0: pci function 0000:03:00.0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (FIJI 0x1002:0x7300 0x174B:0xE329 0xCB).
[drm] register mmio base: 0xFBE00000
[drm] register mmio size: 262144
[drm] probing gen 2 caps for device 8086:1901 = 261ad03/e
[drm] probing mlw for device 8086:1901 = 261ad03
[drm] UVD is enabled in physical mode
[drm] VCE enabled in physical mode
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf4b000 port 0xfbf4b100 irq 41
ata2: SATA max UDMA/133 abar m2048@0xfbf4b000 port 0xfbf4b180 irq 41
ata3: SATA max UDMA/133 abar m2048@0xfbf4b000 port 0xfbf4b200 irq 41
ata4: SATA max UDMA/133 abar m2048@0xfbf4b000 port 0xfbf4b280 irq 41
ata5: SATA max UDMA/133 abar m2048@0xfbf4b000 port 0xfbf4b300 irq 41
ata6: SATA max UDMA/133 abar m2048@0xfbf4b000 port 0xfbf4b380 irq 41
ata7: SATA max UDMA/133 abar m2048@0xfbf4b000 port 0xfbf4b400 irq 41
ata8: SATA max UDMA/133 abar m2048@0xfbf4b000 port 0xfbf4b480 irq 41
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
nvme0n1: p1 p2 p3
usb 1-5: new high-speed USB device number 2 using xhci_hcd
[drm] BIOS signature incorrect 0 0
amdgpu 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: 113-1E3290U-S4A
[drm] GPU post is not needed
[drm] Changing default dispclk from 500Mhz to 600Mhz
[drm] vm size is 64 GB, block size is 13-bit
amdgpu 0000:01:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used)
amdgpu 0000:01:00.0: GTT: 4096M 0x0000000100000000 - 0x00000001FFFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 512bits HBM
[TTM] Zone kernel: Available graphics memory: 8166386 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 1048576, num gpu pages 1048576
[drm] PCIE GART of 4096M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
amdgpu: [powerplay] amdgpu: powerplay sw initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD5
[drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DP-2
[drm] HPD4
[drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] DP-3
[drm] HPD3
[drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] Connector 3:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY2
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000100000008, cpu addr 0xffff99e84294f008
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000100000018, cpu addr 0xffff99e84294f018
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000100000028, cpu addr 0xffff99e84294f028
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000100000038, cpu addr 0xffff99e84294f038
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000100000048, cpu addr 0xffff99e84294f048
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000100000058, cpu addr 0xffff99e84294f058
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000100000068, cpu addr 0xffff99e84294f068
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000100000078, cpu addr 0xffff99e84294f078
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000100000088, cpu addr 0xffff99e84294f088
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x000000010000009c, cpu addr 0xffff99e84294f09c
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000001000000ac, cpu addr 0xffff99e84294f0ac
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x00000001000000bc, cpu addr 0xffff99e84294f0bc
[drm] Found UVD firmware Version: 1.87 Family ID: 12
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x0000000000a12e90, cpu addr 0xffffb93cc343fe90
[drm] Found VCE firmware Version: 52.8 Binary ID: 3
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000001000000dc, cpu addr 0xffff99e84294f0dc
amdgpu 0000:01:00.0: fence driver on ring 14 use gpu addr 0x00000001000000ec, cpu addr 0xffff99e84294f0ec
amdgpu 0000:01:00.0: fence driver on ring 15 use gpu addr 0x00000001000000fc, cpu addr 0xffff99e84294f0fc
usb 1-5: New USB device found, idVendor=1a40, idProduct=0101
usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-5: Product: USB 2.0 Hub
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: [powerplay] Failed to setup PCC HW register! Wrong GPIO assigned for VDDC_PCC_GPIO_PINID!
[drm] ring test on 0 succeeded in 17 usecs
[drm] ring test on 9 succeeded in 12 usecs
[drm] ring test on 1 succeeded in 10 usecs
[drm] ring test on 2 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 12 usecs
[drm] ring test on 6 succeeded in 3 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] ring test on 8 succeeded in 3 usecs
[drm] ring test on 10 succeeded in 6 usecs
[drm] ring test on 11 succeeded in 5 usecs
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[drm] ring test on 12 succeeded in 1 usecs
[drm] UVD initialized successfully.
ata1: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8.00: supports DRM functions and may not be fully accessible
ata7: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata8.00: ATA-10: Crucial_CT525MX300SSD1, M0CR040, max UDMA/133
ata8.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata8.00: supports DRM functions and may not be fully accessible
ata8.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access ATA Crucial_CT525MX3 R040 PQ: 0 ANSI: 5
usb 1-7: new full-speed USB device number 3 using xhci_hcd
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 10:7b:44:4f:1c:f0
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[drm] ring test on 13 succeeded in 14 usecs
[drm] ring test on 14 succeeded in 3 usecs
[drm] ring test on 15 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
ata8.00: Enabling discard_zeroes_data
sd 7:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
sd 7:0:0:0: [sda] Write Protect is off
sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: Enabling discard_zeroes_data
sd 7:0:0:0: Attached scsi generic sg0 type 0
ata8.00: Enabling discard_zeroes_data
sd 7:0:0:0: [sda] supports TCG Opal
sd 7:0:0:0: [sda] Attached SCSI disk
usb 1-7: New USB device found, idVendor=0403, idProduct=6001
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7: Product: FT232R USB UART
usb 1-7: Manufacturer: FTDI
usb 1-7: SerialNumber: A800fq8V
[drm] fb mappable at 0xE0D93000
[drm] vram apper at 0xE0000000
[drm] size 33177600
[drm] fb depth is 24
[drm] pitch is 15360
fbcon: amdgpudrmfb (fb0) is primary device
usb 1-5.4: new high-speed USB device number 4 using xhci_hcd
Console: switching to colour frame buffer device 480x135
clocksource: Switched to clocksource tsc
usb 1-5.4: New USB device found, idVendor=2109, idProduct=2811
usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.4: Product: USB2.0 Hub
usb 1-5.4: Manufacturer: VIA Labs, Inc.
hub 1-5.4:1.0: USB hub found
hub 1-5.4:1.0: 4 ports detected
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.18.0 20150101 for 0000:01:00.0 on minor 0
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target User and Group Name Lookups.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
systemd-journald[306]: Received request to flush runtime journal from PID 1
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input3
asus_wmi: Number of fans: 1
usb 1-5.4.3: new full-speed USB device number 5 using xhci_hcd
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
Adding 16680956k swap on /dev/nvme0n1p3. Priority:-1 extents:1 across:16680956k SSFS
random: crng init done
usb 1-5.4.3: New USB device found, idVendor=1532, idProduct=0043
usb 1-5.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.4.3: Product: Razer DeathAdder Chroma
usb 1-5.4.3: Manufacturer: Razer
audit: type=1400 audit(1502111248.780:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=762 comm="apparmor_parser"
audit: type=1400 audit(1502111248.780:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=759 comm="apparmor_parser"
audit: type=1400 audit(1502111248.780:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=759 comm="apparmor_parser"
audit: type=1400 audit(1502111248.781:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=760 comm="apparmor_parser"
audit: type=1400 audit(1502111248.782:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=764 comm="apparmor_parser"
audit: type=1400 audit(1502111248.782:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=755 comm="apparmor_parser"
audit: type=1400 audit(1502111248.782:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=755 comm="apparmor_parser"
audit: type=1400 audit(1502111248.782:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=755 comm="apparmor_parser"
audit: type=1400 audit(1502111248.782:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=755 comm="apparmor_parser"
usb 1-5.4.4: new low-speed USB device number 6 using xhci_hcd
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
usb 1-5.4.4: New USB device found, idVendor=04f2, idProduct=0833
usb 1-5.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.4.4: Product: USB Keyboard
usb 1-5.4.4: Manufacturer: CHICONY
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.4/1-5.4.3/1-5.4.3:1.0/0003:1532:0043.0001/input/input17
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
hid-generic 0003:1532:0043.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-5.4.3/input0
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.4/1-5.4.3/1-5.4.3:1.1/0003:1532:0043.0002/input/input18
hid-generic 0003:1532:0043.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-5.4.3/input1
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.4/1-5.4.3/1-5.4.3:1.2/0003:1532:0043.0003/input/input19
hid-generic 0003:1532:0043.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-5.4.3/input2
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.4/1-5.4.4/1-5.4.4:1.0/0003:04F2:0833.0004/input/input20
hid-generic 0003:04F2:0833.0004: input,hidraw3: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-5.4.4/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.4/1-5.4.4/1-5.4.4:1.1/0003:04F2:0833.0005/input/input21
hid-generic 0003:04F2:0833.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-5.4.4/input1
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver ftdi_sio
ftdi_sio 1-7:1.0: FTDI USB Serial Device converter detected
usb 1-7: Detected FT232RL
usb 1-7: FTDI USB Serial Device converter now attached to ttyUSB0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)