dmesg - 2
microcode: microcode updated early to revision 0x29, date = 2013-06-12
Linux version 4.11.8-200.fc25.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 6.3.1 20161221 (Red Hat 6.3.1-1) (GCC) ) #1 SMP Thu Jun 29 16:13:56 UTC 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000befb9fff] usable
BIOS-e820: [mem 0x00000000befba000-0x00000000bf010fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf011000-0x00000000bf59ffff] reserved
BIOS-e820: [mem 0x00000000bf5a0000-0x00000000bf5b0fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf5b1000-0x00000000bf5c7fff] reserved
BIOS-e820: [mem 0x00000000bf5c8000-0x00000000bf5c9fff] usable
BIOS-e820: [mem 0x00000000bf5ca000-0x00000000bf5cafff] ACPI NVS
BIOS-e820: [mem 0x00000000bf5cb000-0x00000000bf5d2fff] reserved
BIOS-e820: [mem 0x00000000bf5d3000-0x00000000bf5dcfff] ACPI NVS
BIOS-e820: [mem 0x00000000bf5dd000-0x00000000bf638fff] reserved
BIOS-e820: [mem 0x00000000bf639000-0x00000000bf67bfff] ACPI NVS
BIOS-e820: [mem 0x00000000bf67c000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043f7fffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x0a994018-0x0a9b3857] usable ==> usable
e820: update [mem 0x0a956018-0x0a965657] usable ==> usable
e820: update [mem 0x0a966018-0x0a969e57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x000000000a956017] usable
reserve setup_data: [mem 0x000000000a956018-0x000000000a965657] usable
reserve setup_data: [mem 0x000000000a965658-0x000000000a966017] usable
reserve setup_data: [mem 0x000000000a966018-0x000000000a969e57] usable
reserve setup_data: [mem 0x000000000a969e58-0x000000000a994017] usable
reserve setup_data: [mem 0x000000000a994018-0x000000000a9b3857] usable
reserve setup_data: [mem 0x000000000a9b3858-0x00000000befb9fff] usable
reserve setup_data: [mem 0x00000000befba000-0x00000000bf010fff] ACPI NVS
reserve setup_data: [mem 0x00000000bf011000-0x00000000bf59ffff] reserved
reserve setup_data: [mem 0x00000000bf5a0000-0x00000000bf5b0fff] ACPI NVS
reserve setup_data: [mem 0x00000000bf5b1000-0x00000000bf5c7fff] reserved
reserve setup_data: [mem 0x00000000bf5c8000-0x00000000bf5c9fff] usable
reserve setup_data: [mem 0x00000000bf5ca000-0x00000000bf5cafff] ACPI NVS
reserve setup_data: [mem 0x00000000bf5cb000-0x00000000bf5d2fff] reserved
reserve setup_data: [mem 0x00000000bf5d3000-0x00000000bf5dcfff] ACPI NVS
reserve setup_data: [mem 0x00000000bf5dd000-0x00000000bf638fff] reserved
reserve setup_data: [mem 0x00000000bf639000-0x00000000bf67bfff] ACPI NVS
reserve setup_data: [mem 0x00000000bf67c000-0x00000000bf7fffff] usable
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000043f7fffff] usable
efi: EFI v2.00 by American Megatrends
efi: SMBIOS=0xbf637a18 ACPI=0xbf008000 ACPI 2.0=0xbf008000 MPS=0xfcaf0
SMBIOS 2.6 present.
DMI: System manufacturer System Product Name/SABERTOOTH P67, BIOS 2103 11/22/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x43f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-DFFFF uncachable
E0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 43F800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce50-0x000fce5f] mapped at [ffff90cbc00fce50]
Base memory trampoline at [ffff90cbc0097000] 97000 size 24576
BRK [0x404386000, 0x404386fff] PGTABLE
BRK [0x404387000, 0x404387fff] PGTABLE
BRK [0x404388000, 0x404388fff] PGTABLE
BRK [0x404389000, 0x404389fff] PGTABLE
BRK [0x40438a000, 0x40438afff] PGTABLE
BRK [0x40438b000, 0x40438bfff] PGTABLE
BRK [0x40438c000, 0x40438cfff] PGTABLE
BRK [0x40438d000, 0x40438dfff] PGTABLE
BRK [0x40438e000, 0x40438efff] PGTABLE
BRK [0x40438f000, 0x40438ffff] PGTABLE
BRK [0x404390000, 0x404390fff] PGTABLE
BRK [0x404391000, 0x404391fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x3d7cc000-0x3e914fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BF008000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BF008068 00004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BF0109A0 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BF008140 00885A (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BF5D4F80 000040
ACPI: APIC 0x00000000BF010A98 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000BF010B30 0001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 0x00000000BF010D08 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BF010D48 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043f7fffff]
NODE_DATA(0) allocated [mem 0x43f7cb000-0x43f7f5fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043f7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000befb9fff]
node 0: [mem 0x00000000bf5c8000-0x00000000bf5c9fff]
node 0: [mem 0x00000000bf67c000-0x00000000bf7fffff]
node 0: [mem 0x0000000100000000-0x000000043f7fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000043f7fffff]
On node 0 totalpages: 4188383
DMA zone: 64 pages used for memmap
DMA zone: 41 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 12165 pages used for memmap
DMA32 zone: 778560 pages, LIFO batch:31
Normal zone: 53216 pages used for memmap
Normal zone: 3405824 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x0a956000-0x0a956fff]
PM: Registered nosave memory: [mem 0x0a965000-0x0a965fff]
PM: Registered nosave memory: [mem 0x0a966000-0x0a966fff]
PM: Registered nosave memory: [mem 0x0a969000-0x0a969fff]
PM: Registered nosave memory: [mem 0x0a994000-0x0a994fff]
PM: Registered nosave memory: [mem 0x0a9b3000-0x0a9b3fff]
PM: Registered nosave memory: [mem 0xbefba000-0xbf010fff]
PM: Registered nosave memory: [mem 0xbf011000-0xbf59ffff]
PM: Registered nosave memory: [mem 0xbf5a0000-0xbf5b0fff]
PM: Registered nosave memory: [mem 0xbf5b1000-0xbf5c7fff]
PM: Registered nosave memory: [mem 0xbf5ca000-0xbf5cafff]
PM: Registered nosave memory: [mem 0xbf5cb000-0xbf5d2fff]
PM: Registered nosave memory: [mem 0xbf5d3000-0xbf5dcfff]
PM: Registered nosave memory: [mem 0xbf5dd000-0xbf638fff]
PM: Registered nosave memory: [mem 0xbf639000-0xbf67bfff]
PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff90cfff400000 s108888 r8192 d30376 u262144
pcpu-alloc: s108888 r8192 d30376 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4122897
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 16208292K/16753532K available (8698K kernel code, 1668K rwdata, 3604K rodata, 2124K init, 1816K bss, 545240K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:524544 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3411.183 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6822.36 BogoMIPS (lpj=3411183)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170119
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 31962 entries in 125 pages
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54611.75 BogoMIPS)
sched_clock: Marking stable (460000000, 0)->(685904500, -225904500)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbefba000-0xbf010fff] (356352 bytes)
PM: Registering ACPI NVS region [mem 0xbf5a0000-0xbf5b0fff] (69632 bytes)
PM: Registering ACPI NVS region [mem 0xbf5ca000-0xbf5cafff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xbf5d3000-0xbf5dcfff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xbf639000-0xbf67bfff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 7:55:49, date: 07/10/17
NET: Registered protocol family 16
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF90CFEC8B4000 00079C (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF90CFEC49A800 00021C (v01 AMI CST 00000001 MSFT 03000001)
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
acpi PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ce5ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb529000-0xfb52900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb500000-0xfb51ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb528000-0xfb528fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb527000-0xfb5273ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb520000-0xfb523fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb526000-0xfb5263ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb525000-0xfb5257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb524000-0xfb5240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1c03] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfb400000-0xfb401fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:05:00.0: [197b:2362] type 00 class 0x010185
pci 0000:05:00.0: reg 0x10: [io 0xd040-0xd047]
pci 0000:05:00.0: reg 0x14: [io 0xd030-0xd033]
pci 0000:05:00.0: reg 0x18: [io 0xd020-0xd027]
pci 0000:05:00.0: reg 0x1c: [io 0xd010-0xd013]
pci 0000:05:00.0: reg 0x20: [io 0xd000-0xd00f]
pci 0000:05:00.0: reg 0x24: [mem 0xfb310000-0xfb3101ff]
pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:06:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfb200000-0xfb201fff 64bit]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:07:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:07:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 07-08] (subtractive decode)
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
pci 0000:08:01.0: [1106:3044] type 00 class 0x0c0010
pci 0000:08:01.0: reg 0x10: [mem 0xfb100000-0xfb1007ff]
pci 0000:08:01.0: reg 0x14: [io 0xc000-0xc07f]
pci 0000:08:01.0: supports D2
pci 0000:08:01.0: PME# supported from D2 D3hot D3cold
pci 0000:07:00.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:07:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:07:00.0: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:07:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode)
pci 0000:07:00.0: bridge window [mem 0xfb100000-0xfb1fffff] (subtractive decode)
pci 0000:07:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:07:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:07:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:07:00.0: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0a956018-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a966018-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a994018-0x0bffffff]
e820: reserve RAM buffer [mem 0xbefba000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf5ca000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x43f800000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io 0x0400-0x0453] has been reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:05:00.0: BAR 6: assigned [mem 0xfb300000-0xfb30ffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:07:00.0: PCI bridge to [bus 08]
pci 0000:07:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:07:00.0: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1c.6: PCI bridge to [bus 07-08]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:06: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:07: resource 7 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:08: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:08: resource 4 [io 0xc000-0xcfff]
pci_bus 0000:08: resource 5 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:08: resource 6 [io 0x0000-0x0cf7 window]
pci_bus 0000:08: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:08: resource 9 [mem 0xc0000000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17700K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbafba000-0xbefba000] (64MB) mapped at [ffff90cc7afba000-ffff90cc7efb9fff]
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1499673348.978:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:01.0: Signaling PME with IRQ 24
pcieport 0000:00:1c.0: Signaling PME with IRQ 25
pcieport 0000:00:1c.1: Signaling PME with IRQ 26
pcieport 0000:00:1c.2: Signaling PME with IRQ 27
pcieport 0000:00:1c.3: Signaling PME with IRQ 28
pcieport 0000:00:1c.4: Signaling PME with IRQ 29
efifb: probing for efifb
efifb: framebuffer at 0xd1000000, using 1876k, total 1875k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb525000 port 0xfb525100 irq 30
ata2: SATA max UDMA/133 abar m2048@0xfb525000 port 0xfb525180 irq 30
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfb525000 port 0xfb525300 irq 30
ata6: SATA max UDMA/133 abar m2048@0xfb525000 port 0xfb525380 irq 30
ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xfb310000 port 0xfb310100 irq 19
ata8: SATA max UDMA/133 abar m512@0xfb310000 port 0xfb310180 irq 19
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xfb527000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.11.8-200.fc25.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb526000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.11.8-200.fc25.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.11.8-200.fc25.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:03:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.11.8-200.fc25.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:03:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.11.8-200.fc25.x86_64 xhci-hcd
usb usb5: SerialNumber: 0000:06:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.11.8-200.fc25.x86_64 xhci-hcd
usb usb6: SerialNumber: 0000:06:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: sig=0x206a7, pf=0x2, revision=0x29
microcode: Microcode Update Driver: v2.2.
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'Fedora kernel signing key: a703c4a5168b95e38faad4e87b2d7bd26fa62285'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
Magic number: 9:388:925
rtc_cmos 00:02: setting system clock to 2017-07-10 07:55:50 UTC (1499673350)
PM: Hibernation image not present or could not be loaded.
ata8: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATA-10: WDC WD40EZRZ-00GXCB0, 80.00A80, max UDMA/133
ata6.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
ata2.00: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ATAPI: ASUS DRW-24B3LT, 1.00, max UDMA/100
ata5.00: configured for UDMA/100
ata2.00: configured for UDMA/133
ata1.00: ATA-9: INTEL SSDSC2BW240A4, DC32, max UDMA/133
ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 3-2: new high-speed USB device number 2 using xhci_hcd
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BW24 DC32 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
scsi 1:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 4:0:0:0: CD-ROM ASUS DRW-24B3LT 1.00 PQ: 0 ANSI: 5
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg2 type 5
scsi 5:0:0:0: Direct-Access ATA WDC WD40EZRZ-00G 0A80 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 5:0:0:0: [sdc] 4096-byte physical blocks
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
hub 1-1:1.0: 6 ports detected
usb 3-2: New USB device found, idVendor=058f, idProduct=6362
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Mass Storage Device
usb 3-2: Manufacturer: Generic
usb 3-2: SerialNumber: 058F63626476
usb 2-1.2: new full-speed USB device number 3 using ehci-pci
sdc: sdc1 sdc2
sd 5:0:0:0: [sdc] Attached SCSI disk
Freeing unused kernel memory: 2124K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1528K
Freeing unused kernel memory: 492K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
usb 2-1.2: New USB device found, idVendor=051d, idProduct=0002
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: Back-UPS BR 900GI FW:879.L3 .I USB FW:L3
usb 2-1.2: Manufacturer: American Power Conversion
usb 2-1.2: SerialNumber: 3B1143X33037
random: fast init done
tsc: Refined TSC clocksource calibration: 3411.123 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x312b5a120e9, max_idle_ns: 440795265630 ns
hid-generic 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BR 900GI FW:879.L3 .I USB FW:L3 ] on usb-0000:00:1d.0-1.2/input0
systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Timers.
systemd[1]: Reached target Local File Systems.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Swap.
systemd[1]: Created slice System Slice.
audit: type=1130 audit(1499673351.319:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 2-1.3: new high-speed USB device number 4 using ehci-pci
audit: type=1130 audit(1499673351.350:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1499673351.354:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1499673351.359:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1499673351.382:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1499673351.384:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1499673351.398:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 2-1.3: New USB device found, idVendor=1a40, idProduct=0201
usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.3: Product: USB 2.0 Hub [MTT]
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 7 ports detected
usb 5-2: new high-speed USB device number 2 using xhci_hcd
wmi: Mapper loaded
audit: type=1130 audit(1499673351.436:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
usb-storage 3-2:1.0: USB Mass Storage device detected
scsi host8: usb-storage 3-2:1.0
usbcore: registered new interface driver usb-storage
PTP clock support registered
usbcore: registered new interface driver uas
audit: type=1130 audit(1499673351.451:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 6-2: New USB device found, idVendor=2109, idProduct=0810
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: 4-Port USB 3.0 Hub
usb 6-2: Manufacturer: VIA Labs, Inc.
hub 6-2:1.0: USB hub found
usb 2-1.8: new full-speed USB device number 5 using ehci-pci
firewire_ohci 0000:08:01.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
hub 6-2:1.0: 4 ports detected
usb 5-2: New USB device found, idVendor=2109, idProduct=3431
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: USB2.0 Hub
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
usb 2-1.8: New USB device found, idVendor=0b05, idProduct=1715
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8: Product: Bluetooth 2.0 USB Device
usb 2-1.8: Manufacturer: Broadcom Corp
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
usb 2-1.3.1: new low-speed USB device number 6 using ehci-pci
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f4:6d:04:99:27:50
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 eno1: renamed from eth0
8021q: 802.1Q VLAN Support v1.8
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.3.1: New USB device found, idVendor=0566, idProduct=3107
usb 2-1.3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 0566:3107 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.0/0003:0566:3107.0002/input/input2
hid-generic 0003:0566:3107.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 0566:3107] on usb-0000:00:1d.0-1.3.1/input0
input: HID 0566:3107 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.1/2-1.3.1:1.1/0003:0566:3107.0003/input/input3
hid-generic 0003:0566:3107.0003: input,hidraw2: USB HID v1.10 Device [HID 0566:3107] on usb-0000:00:1d.0-1.3.1/input1
usb 2-1.3.3: new low-speed USB device number 7 using ehci-pci
firewire_core 0000:08:01.0: created device fw0: GUID 001e8c000045b186, S400
usb 2-1.3.3: New USB device found, idVendor=09da, idProduct=000a
usb 2-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3.3: Product: USB Mouse
usb 2-1.3.3: Manufacturer: A4Tech
systemd-journald[265]: Received SIGTERM from PID 1 (systemd).
systemd: 15 output lines suppressed due to ratelimiting
SELinux: 32768 avtab hash slots, 107090 rules.
SELinux: 32768 avtab hash slots, 107090 rules.
SELinux: 8 users, 14 roles, 5072 types, 310 bools, 1 sens, 1024 cats
SELinux: 94 classes, 107090 rules
SELinux: Class sctp_socket not defined in policy.
SELinux: Class icmp_socket not defined in policy.
SELinux: Class ax25_socket not defined in policy.
SELinux: Class ipx_socket not defined in policy.
SELinux: Class netrom_socket not defined in policy.
SELinux: Class atmpvc_socket not defined in policy.
SELinux: Class x25_socket not defined in policy.
SELinux: Class rose_socket not defined in policy.
SELinux: Class decnet_socket not defined in policy.
SELinux: Class atmsvc_socket not defined in policy.
SELinux: Class rds_socket not defined in policy.
SELinux: Class irda_socket not defined in policy.
SELinux: Class pppox_socket not defined in policy.
SELinux: Class llc_socket not defined in policy.
SELinux: Class can_socket not defined in policy.
SELinux: Class tipc_socket not defined in policy.
SELinux: Class bluetooth_socket not defined in policy.
SELinux: Class iucv_socket not defined in policy.
SELinux: Class rxrpc_socket not defined in policy.
SELinux: Class isdn_socket not defined in policy.
SELinux: Class phonet_socket not defined in policy.
SELinux: Class ieee802154_socket not defined in policy.
SELinux: Class caif_socket not defined in policy.
SELinux: Class alg_socket not defined in policy.
SELinux: Class nfc_socket not defined in policy.
SELinux: Class vsock_socket not defined in policy.
SELinux: Class kcm_socket not defined in policy.
SELinux: Class qipcrtr_socket not defined in policy.
SELinux: Class smc_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
systemd[1]: Successfully loaded SELinux policy in 84.340ms.
systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
systemd[1]: Relabelled /dev and /run in 19.579ms.
clocksource: Switched to clocksource tsc
EXT4-fs (sda6): re-mounted. Opts: (null)
scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
scsi 8:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
scsi 8:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg4 type 0
sd 8:0:0:1: Attached scsi generic sg5 type 0
sd 8:0:0:2: Attached scsi generic sg6 type 0
sd 8:0:0:3: Attached scsi generic sg7 type 0
sd 8:0:0:0: [sdd] Attached SCSI removable disk
sd 8:0:0:1: [sde] Attached SCSI removable disk
sd 8:0:0:2: [sdf] Attached SCSI removable disk
sd 8:0:0:3: [sdg] Attached SCSI removable disk
systemd-journald[563]: Received request to flush runtime journal from PID 1
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20170119/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20170119/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.SBRG.GPBX) (20170119/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
random: crng init done
input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.3/2-1.3.3:1.0/0003:09DA:000A.0004/input/input4
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
a4tech 0003:09DA:000A.0004: input,hidraw3: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.0-1.3.3/input0
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
usbcore: registered new interface driver btusb
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 240
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.66 Mon May 1 15:29:16 PDT 2017 (using threaded interrupts)
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
Adding 14648316k swap on /dev/sda7. Priority:-1 extents:1 across:14648316k SSFS
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.66 Mon May 1 14:33:30 PDT 2017
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
kvm: disabled by bios
iTCO_vendor_support: vendor-support=0
asus_wmi: ASUS WMI generic driver loaded
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13
asus_wmi: Number of fans: 1
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
kvm: disabled by bios
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: RAPL package 0 domain package locked by BIOS
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
fuse init (API version 7.26)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
e1000e 0000:00:19.0 eno1: changing MTU from 1500 to 1492
FS-Cache: Loaded
Key type dns_resolver registered
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-ece037ca-a9fe-7d85-b5db-537df94878d8) @ PCI:0000:01:00.0
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Autodisabling the use of server inode numbers on \\192.168.1.1\keenetic_hdd. This server doesn't seem to support them properly. Hardlinks will not be recognized on this mount. Consider mounting with the "noserverino" option to silence this message.
CIFS VFS: bogus file nlink value 0
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.255 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 5:0:0:0: [sdc] Synchronizing SCSI cache
serial 00:04: disabled
serial 00:04: System wakeup disabled by ACPI
ACPI : EC: event blocked
sd 5:0:0:0: [sdc] Stopping disk
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000011
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 792.936 msecs
PM: suspend devices took 0.793 seconds
PM: late suspend of devices complete after 0.610 msecs
ACPI : EC: interrupt blocked
pcieport 0000:00:1c.4: System wakeup enabled by ACPI
pcieport 0000:00:1c.1: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 13.883 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 30
smpboot: CPU 1 is now offline
Broke affinity for irq 30
smpboot: CPU 2 is now offline
Broke affinity for irq 30
smpboot: CPU 3 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
smpboot: CPU 4 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
smpboot: CPU 5 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 39
smpboot: CPU 6 is now offline
Broke affinity for irq 17
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 39
Broke affinity for irq 50
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 37415.000 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
microcode: sig=0x206a7, pf=0x2, revision=0x25
microcode: updated to revision 0x29, date = 2013-06-12
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
microcode: sig=0x206a7, pf=0x2, revision=0x29
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
ACPI : EC: interrupt unblocked
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.4: System wakeup disabled by ACPI
pcieport 0000:00:1c.1: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 12.263 msecs
PM: early resume of devices complete after 0.331 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
ACPI : EC: event unblocked
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
sd 5:0:0:0: [sdc] Starting disk
serial 00:04: activated
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: configured for UDMA/100
ata1.00: configured for UDMA/133
firewire_core 0000:08:01.0: rediscovered device fw0
xhci_hcd 0000:06:00.0: Cannot set link state.
usb usb6-port2: cannot disable (err = -32)
PM: resume of devices complete after 2405.358 msecs
PM: resume devices took 2.405 seconds
PM: Finishing wakeup.
Restarting tasks ...
usb 6-2: USB disconnect, device number 2
usb 5-2: USB disconnect, device number 2
done.
usb 5-2: new high-speed USB device number 3 using xhci_hcd
e1000e: eno1 NIC Link is Down
usb 5-2: New USB device found, idVendor=2109, idProduct=3431
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: USB2.0 Hub
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
usb 6-2: new SuperSpeed USB device number 3 using xhci_hcd
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
usb 6-2: New USB device found, idVendor=2109, idProduct=0810
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: 4-Port USB 3.0 Hub
usb 6-2: Manufacturer: VIA Labs, Inc.
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
ata6: link is slow to respond, please be patient (ready=0)
ata2: link is slow to respond, please be patient (ready=0)
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/133
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 5:0:0:0: [sdc] Synchronizing SCSI cache
sd 5:0:0:0: [sdc] Stopping disk
serial 00:04: disabled
serial 00:04: System wakeup disabled by ACPI
ACPI : EC: event blocked
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 800.221 msecs
PM: suspend devices took 0.800 seconds
PM: late suspend of devices complete after 0.666 msecs
ACPI : EC: interrupt blocked
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
pcieport 0000:00:1c.4: System wakeup enabled by ACPI
pcieport 0000:00:1c.1: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 12.960 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 30
smpboot: CPU 1 is now offline
Broke affinity for irq 30
smpboot: CPU 2 is now offline
Broke affinity for irq 30
smpboot: CPU 3 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
smpboot: CPU 4 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
smpboot: CPU 5 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 39
smpboot: CPU 6 is now offline
Broke affinity for irq 9
Broke affinity for irq 17
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 39
Broke affinity for irq 50
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 4497.664 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
microcode: sig=0x206a7, pf=0x2, revision=0x25
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
microcode: sig=0x206a7, pf=0x2, revision=0x29
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
ACPI : EC: interrupt unblocked
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.1: System wakeup disabled by ACPI
pcieport 0000:00:1c.4: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 12.414 msecs
PM: early resume of devices complete after 0.301 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
ACPI : EC: event unblocked
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
sd 5:0:0:0: [sdc] Starting disk
serial 00:04: activated
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: configured for UDMA/100
ata1.00: configured for UDMA/133
firewire_core 0000:08:01.0: rediscovered device fw0
xhci_hcd 0000:06:00.0: Cannot set link state.
usb usb6-port2: cannot disable (err = -32)
PM: resume of devices complete after 2461.293 msecs
PM: resume devices took 2.461 seconds
PM: Finishing wakeup.
Restarting tasks ...
usb 6-2: USB disconnect, device number 3
usb 5-2: USB disconnect, device number 3
done.
usb 2-1.3.7: new high-speed USB device number 8 using ehci-pci
usb 5-2: new full-speed USB device number 4 using xhci_hcd
usb 2-1.3.7: New USB device found, idVendor=0b05, idProduct=7772
usb 2-1.3.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3.7: Product: Android
usb 2-1.3.7: Manufacturer: Android
usb 2-1.3.7: SerialNumber: G9AXGV8415338WD
usb 5-2: device descriptor read/64, error -71
e1000e: eno1 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
usb 5-2: device descriptor read/64, error -71
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
usb 6-2: new SuperSpeed USB device number 4 using xhci_hcd
usb 5-2: new high-speed USB device number 6 using xhci_hcd
usb 6-2: New USB device found, idVendor=2109, idProduct=0810
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: 4-Port USB 3.0 Hub
usb 6-2: Manufacturer: VIA Labs, Inc.
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
usb 5-2: New USB device found, idVendor=2109, idProduct=3431
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: USB2.0 Hub
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
ata2: link is slow to respond, please be patient (ready=0)
ata6: link is slow to respond, please be patient (ready=0)
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/133
usb 2-1.3.7: USB disconnect, device number 8
usb 2-1.3.7: new high-speed USB device number 9 using ehci-pci
usb 2-1.3.7: New USB device found, idVendor=0b05, idProduct=7772
usb 2-1.3.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3.7: Product: Android
usb 2-1.3.7: Manufacturer: Android
usb 2-1.3.7: SerialNumber: G9AXGV8415338WD
usb 2-1.3.7: USB disconnect, device number 9
usb 2-1.3.7: new high-speed USB device number 10 using ehci-pci
usb 2-1.3.7: New USB device found, idVendor=0b05, idProduct=5600
usb 2-1.3.7: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 2-1.3.7: Product: Android
usb 2-1.3.7: Manufacturer: Android
usb 2-1.3.7: SerialNumber: F7AZFG07F168
usb-storage 2-1.3.7:1.1: USB Mass Storage device detected
scsi host9: usb-storage 2-1.3.7:1.1
scsi 9:0:0:0: CD-ROM ASUS File-CD Gadget 0310 PQ: 0 ANSI: 2
sr 9:0:0:0: [sr1] scsi-1 drive
sr 9:0:0:0: Attached scsi CD-ROM sr1
sr 9:0:0:0: Attached scsi generic sg8 type 5
usb 2-1.3.7: USB disconnect, device number 10
usb 2-1.3.7: new high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: New USB device found, idVendor=0b05, idProduct=5600
usb 2-1.3.7: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 2-1.3.7: Product: Android
usb 2-1.3.7: Manufacturer: Android
usb 2-1.3.7: SerialNumber: F7AZFG07F168
usb-storage 2-1.3.7:1.1: USB Mass Storage device detected
scsi host9: usb-storage 2-1.3.7:1.1
scsi 9:0:0:0: CD-ROM ASUS File-CD Gadget 0310 PQ: 0 ANSI: 2
sr 9:0:0:0: [sr1] scsi-1 drive
sr 9:0:0:0: Attached scsi CD-ROM sr1
sr 9:0:0:0: Attached scsi generic sg8 type 5
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: usbfs: process 4383 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: usbfs: process 4383 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4375 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: usbfs: process 4375 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4383 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4390 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: usbfs: process 4390 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4375 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4375 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: usbfs: process 4390 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4375 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: usbfs: process 4375 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4390 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: usbfs: process 4410 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: usbfs: process 4410 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4410 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4413 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: usbfs: process 4413 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: usbfs: process 4393 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: usbfs: process 4413 (mtp.so) did not claim interface 0 before use
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
usb 2-1.3.7: reset high-speed USB device number 11 using ehci-pci
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
usb 2-1.3.7: USB disconnect, device number 11
usb 2-1.3.7: new high-speed USB device number 12 using ehci-pci
usb 2-1.3.7: New USB device found, idVendor=0b05, idProduct=7772
usb 2-1.3.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3.7: Product: Android
usb 2-1.3.7: Manufacturer: Android
usb 2-1.3.7: SerialNumber: G9AXGV8415338WD
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 2.353 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
serial 00:04: disabled
serial 00:04: System wakeup disabled by ACPI
ACPI : EC: event blocked
sd 5:0:0:0: [sdc] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 5:0:0:0: [sdc] Stopping disk
sd 1:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000011
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 812.048 msecs
PM: suspend devices took 0.812 seconds
PM: late suspend of devices complete after 0.754 msecs
ACPI : EC: interrupt blocked
pcieport 0000:00:1c.4: System wakeup enabled by ACPI
pcieport 0000:00:1c.1: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 12.978 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 30
smpboot: CPU 1 is now offline
Broke affinity for irq 30
smpboot: CPU 2 is now offline
Broke affinity for irq 30
smpboot: CPU 3 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
smpboot: CPU 4 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
smpboot: CPU 5 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 39
smpboot: CPU 6 is now offline
Broke affinity for irq 9
Broke affinity for irq 17
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 39
Broke affinity for irq 50
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 728.489 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
microcode: sig=0x206a7, pf=0x2, revision=0x25
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
microcode: sig=0x206a7, pf=0x2, revision=0x29
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
ACPI : EC: interrupt unblocked
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.1: System wakeup disabled by ACPI
pcieport 0000:00:1c.4: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 12.795 msecs
PM: early resume of devices complete after 0.376 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
ACPI : EC: event unblocked
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
sd 5:0:0:0: [sdc] Starting disk
serial 00:04: activated
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: configured for UDMA/100
ata1.00: configured for UDMA/133
firewire_core 0000:08:01.0: rediscovered device fw0
xhci_hcd 0000:06:00.0: Cannot set link state.
usb usb6-port2: cannot disable (err = -32)
PM: resume of devices complete after 2448.241 msecs
PM: resume devices took 2.449 seconds
PM: Finishing wakeup.
Restarting tasks ...
usb 5-2: USB disconnect, device number 6
usb 6-2: USB disconnect, device number 4
done.
usb 5-2: new full-speed USB device number 7 using xhci_hcd
usb 5-2: device descriptor read/64, error -71
e1000e: eno1 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
usb 5-2: device descriptor read/64, error -71
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
usb 5-2: new high-speed USB device number 9 using xhci_hcd
usb 5-2: New USB device found, idVendor=2109, idProduct=3431
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: USB2.0 Hub
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
usb 6-2: new SuperSpeed USB device number 5 using xhci_hcd
usb 6-2: New USB device found, idVendor=2109, idProduct=0810
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: 4-Port USB 3.0 Hub
usb 6-2: Manufacturer: VIA Labs, Inc.
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
ata6: link is slow to respond, please be patient (ready=0)
ata2: link is slow to respond, please be patient (ready=0)
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/133
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
usb 2-1.3.7: USB disconnect, device number 12
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
Freezing remaining freezable tasks ... (elapsed 3.011 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
serial 00:04: disabled
serial 00:04: System wakeup disabled by ACPI
ACPI : EC: event blocked
sd 5:0:0:0: [sdc] Synchronizing SCSI cache
sd 5:0:0:0: [sdc] Stopping disk
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 777.166 msecs
PM: suspend devices took 0.777 seconds
PM: late suspend of devices complete after 0.600 msecs
ACPI : EC: interrupt blocked
pcieport 0000:00:1c.4: System wakeup enabled by ACPI
pcieport 0000:00:1c.1: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 12.978 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 30
smpboot: CPU 1 is now offline
Broke affinity for irq 30
smpboot: CPU 2 is now offline
Broke affinity for irq 30
smpboot: CPU 3 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
smpboot: CPU 4 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
smpboot: CPU 5 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 39
smpboot: CPU 6 is now offline
Broke affinity for irq 9
Broke affinity for irq 17
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 39
Broke affinity for irq 50
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 28803.548 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
microcode: sig=0x206a7, pf=0x2, revision=0x25
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
microcode: sig=0x206a7, pf=0x2, revision=0x29
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
ACPI : EC: interrupt unblocked
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.4: System wakeup disabled by ACPI
pcieport 0000:00:1c.1: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.253 msecs
PM: early resume of devices complete after 0.319 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
ACPI : EC: event unblocked
rtc_cmos 00:02: System wakeup disabled by ACPI
serial 00:04: activated
sd 0:0:0:0: [sda] Starting disk
sd 1:0:0:0: [sdb] Starting disk
sd 5:0:0:0: [sdc] Starting disk
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: configured for UDMA/100
ata1.00: configured for UDMA/133
firewire_core 0000:08:01.0: rediscovered device fw0
usb 6-2: reset SuperSpeed USB device number 5 using xhci_hcd
PM: resume of devices complete after 2945.234 msecs
PM: resume devices took 2.946 seconds
PM: Finishing wakeup.
Restarting tasks ...
usb 5-2: USB disconnect, device number 9
done.
usb 5-2: new high-speed USB device number 10 using xhci_hcd
e1000e: eno1 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
usb 5-2: New USB device found, idVendor=2109, idProduct=3431
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: USB2.0 Hub
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
ata2: link is slow to respond, please be patient (ready=0)
ata6: link is slow to respond, please be patient (ready=0)
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: configured for UDMA/133
ata2.00: configured for UDMA/133
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 1.590 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
serial 00:04: disabled
serial 00:04: System wakeup disabled by ACPI
ACPI : EC: event blocked
sd 5:0:0:0: [sdc] Synchronizing SCSI cache
sd 5:0:0:0: [sdc] Stopping disk
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000011
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 794.058 msecs
PM: suspend devices took 0.794 seconds
PM: late suspend of devices complete after 0.739 msecs
ACPI : EC: interrupt blocked
pcieport 0000:00:1c.4: System wakeup enabled by ACPI
pcieport 0000:00:1c.1: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 12.863 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 30
smpboot: CPU 1 is now offline
Broke affinity for irq 30
smpboot: CPU 2 is now offline
Broke affinity for irq 30
smpboot: CPU 3 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
smpboot: CPU 4 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
smpboot: CPU 5 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 39
smpboot: CPU 6 is now offline
Broke affinity for irq 9
Broke affinity for irq 17
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 39
Broke affinity for irq 50
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 6464.045 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
microcode: sig=0x206a7, pf=0x2, revision=0x25
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
microcode: sig=0x206a7, pf=0x2, revision=0x29
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
ACPI : EC: interrupt unblocked
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.4: System wakeup disabled by ACPI
pcieport 0000:00:1c.1: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 12.521 msecs
PM: early resume of devices complete after 0.330 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
ACPI : EC: event unblocked
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 1:0:0:0: [sdb] Starting disk
sd 0:0:0:0: [sda] Starting disk
sd 5:0:0:0: [sdc] Starting disk
serial 00:04: activated
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: configured for UDMA/100
ata1.00: configured for UDMA/133
firewire_core 0000:08:01.0: rediscovered device fw0
xhci_hcd 0000:06:00.0: Cannot set link state.
usb usb6-port2: cannot disable (err = -32)
PM: resume of devices complete after 2392.282 msecs
PM: resume devices took 2.392 seconds
PM: Finishing wakeup.
Restarting tasks ...
usb 5-2: USB disconnect, device number 10
done.
usb 6-2: USB disconnect, device number 5
usb 5-2: new full-speed USB device number 11 using xhci_hcd
usb 5-2: device descriptor read/64, error -71
e1000e: eno1 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
usb 6-2: new SuperSpeed USB device number 6 using xhci_hcd
usb 5-2: new high-speed USB device number 12 using xhci_hcd
usb 6-2: New USB device found, idVendor=2109, idProduct=0810
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: 4-Port USB 3.0 Hub
usb 6-2: Manufacturer: VIA Labs, Inc.
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
usb 5-2: New USB device found, idVendor=2109, idProduct=3431
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: USB2.0 Hub
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
ata2: link is slow to respond, please be patient (ready=0)
ata6: link is slow to respond, please be patient (ready=0)
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/133
perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3140 > 3133), lowering kernel.perf_event_max_sample_rate to 63000
CIFS VFS: bogus file nlink value 0
CIFS VFS: bogus file nlink value 0
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 1.103 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
serial 00:04: disabled
serial 00:04: System wakeup disabled by ACPI
ACPI : EC: event blocked
sd 5:0:0:0: [sdc] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Stopping disk
sd 5:0:0:0: [sdc] Stopping disk
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000011
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 811.007 msecs
PM: suspend devices took 0.812 seconds
PM: late suspend of devices complete after 0.710 msecs
ACPI : EC: interrupt blocked
pcieport 0000:00:1c.4: System wakeup enabled by ACPI
pcieport 0000:00:1c.1: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 13.195 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 30
smpboot: CPU 1 is now offline
Broke affinity for irq 30
smpboot: CPU 2 is now offline
Broke affinity for irq 30
smpboot: CPU 3 is now offline
Broke affinity for irq 30
Broke affinity for irq 31
smpboot: CPU 4 is now offline
Broke affinity for irq 30
Broke affinity for irq 31
smpboot: CPU 5 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 39
smpboot: CPU 6 is now offline
Broke affinity for irq 9
Broke affinity for irq 17
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 39
Broke affinity for irq 50
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 17073.267 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
microcode: sig=0x206a7, pf=0x2, revision=0x25
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
microcode: sig=0x206a7, pf=0x2, revision=0x29
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
ACPI : EC: interrupt unblocked
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.4: System wakeup disabled by ACPI
pcieport 0000:00:1c.1: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 12.222 msecs
PM: early resume of devices complete after 0.324 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
ACPI : EC: event unblocked
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 1:0:0:0: [sdb] Starting disk
sd 0:0:0:0: [sda] Starting disk
sd 5:0:0:0: [sdc] Starting disk
serial 00:04: activated
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: configured for UDMA/100
ata1.00: configured for UDMA/133
firewire_core 0000:08:01.0: rediscovered device fw0
xhci_hcd 0000:06:00.0: Cannot set link state.
usb usb6-port2: cannot disable (err = -32)
PM: resume of devices complete after 2389.306 msecs
PM: resume devices took 2.389 seconds
PM: Finishing wakeup.
Restarting tasks ...
usb 6-2: USB disconnect, device number 6
done.
usb 5-2: USB disconnect, device number 12
usb 5-2: new full-speed USB device number 13 using xhci_hcd
e1000e: eno1 NIC Link is Down
usb 5-2: device descriptor read/64, error -71
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
usb 6-2: new SuperSpeed USB device number 7 using xhci_hcd
usb 5-2: new high-speed USB device number 14 using xhci_hcd
usb 6-2: New USB device found, idVendor=2109, idProduct=0810
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: 4-Port USB 3.0 Hub
usb 6-2: Manufacturer: VIA Labs, Inc.
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
usb 5-2: New USB device found, idVendor=2109, idProduct=3431
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: USB2.0 Hub
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
ata2: link is slow to respond, please be patient (ready=0)
ata6: link is slow to respond, please be patient (ready=0)
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/133
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.016 seconds) done.
Freezing remaining freezable tasks ... (elapsed 5.526 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
serial 00:04: disabled
serial 00:04: System wakeup disabled by ACPI
ACPI : EC: event blocked
sd 5:0:0:0: [sdc] Synchronizing SCSI cache
sd 5:0:0:0: [sdc] Stopping disk
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Stopping disk
sd 0:0:0:0: [sda] Synchronizing SCSI cache
e1000e: EEE TX LPI TIMER: 00000011
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 796.309 msecs
PM: suspend devices took 0.796 seconds
PM: late suspend of devices complete after 0.790 msecs
ACPI : EC: interrupt blocked
pcieport 0000:00:1c.4: System wakeup enabled by ACPI
pcieport 0000:00:1c.1: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 14.232 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 30
smpboot: CPU 1 is now offline
Broke affinity for irq 30
smpboot: CPU 2 is now offline
Broke affinity for irq 30
smpboot: CPU 3 is now offline
Broke affinity for irq 30
Broke affinity for irq 31
smpboot: CPU 4 is now offline
Broke affinity for irq 30
Broke affinity for irq 31
smpboot: CPU 5 is now offline
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 39
smpboot: CPU 6 is now offline
Broke affinity for irq 9
Broke affinity for irq 17
Broke affinity for irq 23
Broke affinity for irq 30
Broke affinity for irq 31
Broke affinity for irq 39
Broke affinity for irq 50
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 859.194 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
microcode: sig=0x206a7, pf=0x2, revision=0x25
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
microcode: sig=0x206a7, pf=0x2, revision=0x29
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
ACPI : EC: interrupt unblocked
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
pcieport 0000:00:1c.1: System wakeup disabled by ACPI
pcieport 0000:00:1c.4: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 12.543 msecs
PM: early resume of devices complete after 0.293 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
ACPI : EC: event unblocked
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 1:0:0:0: [sdb] Starting disk
sd 0:0:0:0: [sda] Starting disk
sd 5:0:0:0: [sdc] Starting disk
serial 00:04: activated
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: configured for UDMA/100
ata1.00: configured for UDMA/133
firewire_core 0000:08:01.0: rediscovered device fw0
xhci_hcd 0000:06:00.0: Cannot set link state.
usb usb6-port2: cannot disable (err = -32)
PM: resume of devices complete after 2390.341 msecs
PM: resume devices took 2.390 seconds
PM: Finishing wakeup.
Restarting tasks ...
usb 5-2: USB disconnect, device number 14
usb 6-2: USB disconnect, device number 7
done.
usb 5-2: new high-speed USB device number 15 using xhci_hcd
e1000e: eno1 NIC Link is Down
usb 5-2: New USB device found, idVendor=2109, idProduct=3431
usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-2: Product: USB2.0 Hub
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 4 ports detected
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
usb 6-2: new SuperSpeed USB device number 8 using xhci_hcd
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
usb 6-2: New USB device found, idVendor=2109, idProduct=0810
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: 4-Port USB 3.0 Hub
usb 6-2: Manufacturer: VIA Labs, Inc.
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 4 ports detected
ata2: link is slow to respond, please be patient (ready=0)
ata6: link is slow to respond, please be patient (ready=0)
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/133
perf: interrupt took too long (3931 > 3925), lowering kernel.perf_event_max_sample_rate to 50000
perf: interrupt took too long (4948 > 4913), lowering kernel.perf_event_max_sample_rate to 40000