dmesg - LinuxSystemAntergos
Linux version 4.11.9-1-ARCH (builduser@tobias) (gcc version 7.1.1 20170621 (GCC) ) #1 SMP PREEMPT Wed Jul 5 18:23:08 CEST 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cf3aefff] usable
BIOS-e820: [mem 0x00000000cf3af000-0x00000000cf3b5fff] ACPI NVS
BIOS-e820: [mem 0x00000000cf3b6000-0x00000000cffdbfff] usable
BIOS-e820: [mem 0x00000000cffdc000-0x00000000d04aefff] reserved
BIOS-e820: [mem 0x00000000d04af000-0x00000000d7db3fff] usable
BIOS-e820: [mem 0x00000000d7db4000-0x00000000d7ffffff] reserved
BIOS-e820: [mem 0x00000000d8000000-0x00000000d8758fff] usable
BIOS-e820: [mem 0x00000000d8759000-0x00000000d87fffff] reserved
BIOS-e820: [mem 0x00000000d8800000-0x00000000d8f95fff] usable
BIOS-e820: [mem 0x00000000d8f96000-0x00000000d8ffffff] ACPI data
BIOS-e820: [mem 0x00000000d9000000-0x00000000da71bfff] usable
BIOS-e820: [mem 0x00000000da71c000-0x00000000da7fffff] ACPI NVS
BIOS-e820: [mem 0x00000000da800000-0x00000000dbcf4fff] usable
BIOS-e820: [mem 0x00000000dbcf5000-0x00000000dbffffff] reserved
BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Dell Inc. Latitude E7440/0PC4X0, BIOS A05 09/23/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x21ee00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DBFFF write-protect
DC000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FE0000000 write-back
2 base 00E0000000 mask 7FE0000000 uncachable
3 base 00DE000000 mask 7FFE000000 uncachable
4 base 00DD000000 mask 7FFF000000 uncachable
5 base 021F000000 mask 7FFF000000 uncachable
6 base 021EE00000 mask 7FFFE00000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdbcf5 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd970-0x000fd97f] mapped at [ffff8800000fd970]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000008b000] 8b000 size 24576
Using GB pages for direct mapping
BRK [0x01d42000, 0x01d42fff] PGTABLE
BRK [0x01d43000, 0x01d43fff] PGTABLE
BRK [0x01d44000, 0x01d44fff] PGTABLE
BRK [0x01d45000, 0x01d45fff] PGTABLE
BRK [0x01d46000, 0x01d46fff] PGTABLE
BRK [0x01d47000, 0x01d47fff] PGTABLE
RAMDISK: [mem 0x372ef000-0x3796efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000EEE50 000024 (v02 DELL )
ACPI: XSDT 0x00000000D8FD6088 000094 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x00000000D8FE77A8 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x00000000D8FD61B0 0115F6 (v02 DELL CBX3 00000014 INTL 20120711)
ACPI: FACS 0x00000000DA7FE080 000040
ACPI: APIC 0x00000000D8FE78B8 000072 (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x00000000D8FE7930 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: SLIC 0x00000000D8FE7978 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: LPIT 0x00000000D8FE7AF0 00005C (v01 DELL CBX3 00000000 AMI. 00000005)
ACPI: SSDT 0x00000000D8FE7B50 000228 (v01 INTEL sensrhub 00000000 INTL 20120711)
ACPI: SSDT 0x00000000D8FE7D78 000548 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x00000000D8FE82C0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: HPET 0x00000000D8FE8D98 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000D8FE8DD0 000455 (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: MCFG 0x00000000D8FE9228 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: ASF! 0x00000000D8FE9268 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: MSDM 0x00000000D8FE9310 000055 (v03 DELL CBX3 06222004 AMI 00010013)
ACPI: DMAR 0x00000000D8FE9368 0000B0 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021edfffff]
NODE_DATA(0) allocated [mem 0x21edf4000-0x21edf8fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021edfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000090fff]
node 0: [mem 0x0000000000100000-0x00000000cf3aefff]
node 0: [mem 0x00000000cf3b6000-0x00000000cffdbfff]
node 0: [mem 0x00000000d04af000-0x00000000d7db3fff]
node 0: [mem 0x00000000d8000000-0x00000000d8758fff]
node 0: [mem 0x00000000d8800000-0x00000000d8f95fff]
node 0: [mem 0x00000000d9000000-0x00000000da71bfff]
node 0: [mem 0x00000000da800000-0x00000000dbcf4fff]
node 0: [mem 0x0000000100000000-0x000000021edfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021edfffff]
On node 0 totalpages: 2072938
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3984 pages, LIFO batch:0
DMA32 zone: 13968 pages used for memmap
DMA32 zone: 893914 pages, LIFO batch:31
Normal zone: 18360 pages used for memmap
Normal zone: 1175040 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000dd200000-0x00000000df1fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcf3af000-0xcf3b5fff]
PM: Registered nosave memory: [mem 0xcffdc000-0xd04aefff]
PM: Registered nosave memory: [mem 0xd7db4000-0xd7ffffff]
PM: Registered nosave memory: [mem 0xd8759000-0xd87fffff]
PM: Registered nosave memory: [mem 0xd8f96000-0xd8ffffff]
PM: Registered nosave memory: [mem 0xda71c000-0xda7fffff]
PM: Registered nosave memory: [mem 0xdbcf5000-0xdbffffff]
PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff88021ea00000 s103256 r8192 d31912 u524288
pcpu-alloc: s103256 r8192 d31912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2040525
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8073716K/8291752K available (6485K kernel code, 1091K rwdata, 2020K rodata, 1304K init, 904K bss, 218036K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:8448 nr_irqs:728 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2494.283 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.42 BogoMIPS (lpj=8314276)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170119
ACPI: 5 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 24K
ftrace: allocating 25552 entries in 100 pages
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
DMAR: RMRR base: 0x000000d7f18000 end: 0x000000d7f26fff
DMAR: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (family: 0x6, model: 0x45, stepping: 0x1)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19967.84 BogoMIPS)
sched_clock: Marking stable (429999957, 0)->(430222911, -222954)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xcf3af000-0xcf3b5fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xda71c000-0xda7fffff] (933888 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 13:20:04, date: 07/08/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880214855C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880214EBC000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880214852000 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x27, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7e34000-0xf7e37fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7e3f000-0xf7e3f01f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7e3c000-0xf7e3cfff]
pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7e3b000-0xf7e3b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7e3a000-0xf7e3a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7e39000-0xf7e390ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [168c:0032] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d7ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xf7d80000-0xf7d8ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:03:00.0: [1217:8520] type 00 class 0x080501
pci 0000:03:00.0: reg 0x10: [mem 0xf7c01000-0xf7c01fff]
pci 0000:03:00.0: reg 0x14: [mem 0xf7c00000-0xf7c007ff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 7F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x27, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
e820: reserve RAM buffer [mem 0xcf3af000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcffdc000-0xcfffffff]
e820: reserve RAM buffer [mem 0xd7db4000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd8759000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd8f96000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda71c000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbcf5000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs DLL05cb PNP0f13 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (disabled)
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 10 [mem 0xdf200000-0xfeafffff window]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 6656K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd3db4000-0xd7db4000] (64MB) mapped at [ffff8800d3db4000-ffff8800d7db3fff]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001800000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
microcode: sig=0x40651, pf=0x40, revision=0x16
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 9:256:331
tty tty52: hash matches
rtc_cmos 00:02: setting system clock to 2017-07-08 13:20:05 UTC (1499520005)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1304K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1692K
Freeing unused kernel memory: 28K
random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
sdhci-pci 0000:03:00.0: SDHCI controller found [1217:8520] (rev 1)
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
SCSI subsystem initialized
libata version 3.00 loaded.
mmc0: Unknown controller version (3). You may experience problems.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7e3b000
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag led clo only pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a100 irq 43
ata2: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a180 irq 43
ata3: DUMMY
usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usb-storage
scsi host3: uas
usbcore: registered new interface driver uas
scsi 3:0:0:0: Direct-Access Seagate Expansion 0634 PQ: 0 ANSI: 6
usb 1-4: new high-speed USB device number 2 using xhci_hcd
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
tsc: Refined TSC clocksource calibration: 2494.222 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3e76dd04, max_idle_ns: 440795285707 ns
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: NCQ Send/Recv Log not supported
ata2.00: ATA-9: SAMSUNG SSD SM841 mSATA 256GB, DXM43D0Q, max UDMA/133
ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: NCQ Send/Recv Log not supported
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD SM84 3D0Q PQ: 0 ANSI: 5
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: Enabling discard_zeroes_data
sd 3:0:0:0: [sda] 976773167 512-byte logical blocks: (500 GB/466 GiB)
sdb: sdb1 sdb2
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 2b 00 10 08
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
usb 3-1.8: new full-speed USB device number 3 using ehci-pci
random: fast init done
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8:1.0/0003:04F3:0111.0001/input/input2
hid-multitouch 0003:04F3:0111.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:1d.0-1.8/input0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
ip_tables: (C) 2000-2006 Netfilter Core Team
random: crng init done
systemd[1]: systemd 233 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target Login Prompts.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
EXT4-fs (sda2): re-mounted. Opts: data=ordered
systemd-journald[190]: Received request to flush runtime journal from PID 1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
ACPI: Power Button [PBTN]
ACPI: AC Adapter [AC] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
ACPI: Power Button [PWRF]
parport_pc 00:07: [io 0x0378-0x037b]
parport_pc 00:07: [io 0x0278-0x027b]
parport_pc 00:07: [io 0x03bc-0x03bf]
parport_pc 00:07: [io 0x0378-0x037b]
parport_pc 00:07: [irq 7]
parport_pc 00:07: activated
parport_pc 00:07: reported by Plug and Play ACPI
wmi: Mapper loaded
ACPI: Battery Slot [BAT0] (battery present)
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (25 C)
i801_smbus 0000:00:1f.3: SPD Write Disable is set
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
input: PC Speaker as /devices/platform/pcspkr/input/input11
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
dell_laptop: Using dell-rbtn acpi driver for receiving events
ppdev: user-space parallel port driver
dell_wmi: Detected Dell WMI interface version 1
input: Dell WMI hotkeys as /devices/virtual/input/input12
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:1f:af:68:a2:06
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0
mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
ath: phy0: Enable LNA combining
ath: phy0: ASPM enabled: 0x43
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90001480000, irq=19
e1000e 0000:00:19.0 eno1: renamed from eth0
ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
nfc: nfc_init: NFC Core ver 0.1
NET: Registered protocol family 39
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
fbcon: inteldrmfb (fb0) is primary device
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
Probing NFC pn544
media: Linux media interface: v0.10
mousedev: PS/2 mouse device common for all mice
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (1bcf:2985)
uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-4:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input23
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
intel_rapl: RAPL package 0 domain package locked by BIOS
intel_rapl: RAPL package 0 domain dram locked by BIOS
input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input24
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input10
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
loop: module loaded
Adding 4095484k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:4095484k FS
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=2)
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
Key type trusted registered
Key type encrypted registered
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 - driver resynced.
ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000028 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x00000000000016ea])
ecryptfs_write_end: Error encrypting page (upper index [0x00000000000021cb])
ecryptfs_write_end: Error encrypting page (upper index [0x0000000000000a39])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x0000000000000a39])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x00000000000016ea])
ecryptfs_write_end: Error encrypting page (upper index [0x00000000000021cb])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x0000000000003ec5])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x0000000000003ec5])
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000001e1fb])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000001e1fb])
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x0000000000000000])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x0000000000000000])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_encrypt_page: Error attempting to write lower page; rc = [-28]
ecryptfs_write_end: Error encrypting page (upper index [0x000000000000003a])
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
ecryptfs_write_metadata_to_contents: Error attempting to write header information to lower file; rc = [-28]
ecryptfs_write_metadata: Error writing metadata out to lower file; rc = [-28]
Error writing headers; rc = [-28]
perf: interrupt took too long (2540 > 2500), lowering kernel.perf_event_max_sample_rate to 78600
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
fuse init (API version 7.26)
perf: interrupt took too long (3181 > 3175), lowering kernel.perf_event_max_sample_rate to 62700
perf: interrupt took too long (4034 > 3976), lowering kernel.perf_event_max_sample_rate to 49500
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 - driver resynced.
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: DualPoint TouchPad at isa0060/serio1/input0 - driver resynced.
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=2)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE
wlp2s0: disassociated from a0:63:91:a2:9e:85 (Reason: 4)
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 2/3)
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 3/3)
wlp2s0: authentication with a0:63:91:a2:9e:85 timed out
wlp2s0: authenticate with a0:63:91:a2:9e:85
wlp2s0: send auth to a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with a0:63:91:a2:9e:85 (try 1/3)
wlp2s0: RX AssocResp from a0:63:91:a2:9e:85 (capab=0x431 status=0 aid=1)
wlp2s0: associated
ath: EEPROM regdomain: 0x8348
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ath: regdomain 0x8348 dynamically updated by country IE