dmesg - lxde
Linux version 4.11.6-201.fc25.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 6.3.1 20161221 (Red Hat 6.3.1-1) (GCC) ) #1 SMP Tue Jun 20 20:21:11 UTC 2017
Command line: BOOT_IMAGE=/vmlinuz-4.11.6-201.fc25.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000def7efff] usable
BIOS-e820: [mem 0x00000000def7f000-0x00000000df87efff] reserved
BIOS-e820: [mem 0x00000000df87f000-0x00000000dfb7efff] ACPI NVS
BIOS-e820: [mem 0x00000000dfb7f000-0x00000000dfbfefff] ACPI data
BIOS-e820: [mem 0x00000000dfbff000-0x00000000dfbfffff] usable
BIOS-e820: [mem 0x00000000dfc00000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f0200000-0x00000000f02fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001feffffff] usable
BIOS-e820: [mem 0x00000001ff000000-0x000000021effffff] reserved
NX (Execute Disable) protection: active
e820: update [mem 0xd4c2e018-0xd4c3dc57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000d4c2e017] usable
reserve setup_data: [mem 0x00000000d4c2e018-0x00000000d4c3dc57] usable
reserve setup_data: [mem 0x00000000d4c3dc58-0x00000000def7efff] usable
reserve setup_data: [mem 0x00000000def7f000-0x00000000df87efff] reserved
reserve setup_data: [mem 0x00000000df87f000-0x00000000dfb7efff] ACPI NVS
reserve setup_data: [mem 0x00000000dfb7f000-0x00000000dfbfefff] ACPI data
reserve setup_data: [mem 0x00000000dfbff000-0x00000000dfbfffff] usable
reserve setup_data: [mem 0x00000000dfc00000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f0200000-0x00000000f02fffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000001feffffff] usable
reserve setup_data: [mem 0x00000001ff000000-0x000000021effffff] reserved
efi: EFI v2.50 by INSYDE Corp.
efi: ESRT=0xdf227098 ACPI 2.0=0xdfbfe014 SMBIOS=0xdf225000
SMBIOS 2.8 present.
DMI: HP HP Notebook/81F9, BIOS F.17 09/01/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1ff000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000FF800000 mask FFFFFF800000 write-protect
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000021f000000 aka 8688M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xdfc00 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000df227098 to 0x00000000df2270d0.
Base memory trampoline at [ffff8cdc40029000] 29000 size 24576
Using GB pages for direct mapping
BRK [0x14381000, 0x14381fff] PGTABLE
BRK [0x14382000, 0x14382fff] PGTABLE
BRK [0x14383000, 0x14383fff] PGTABLE
BRK [0x14384000, 0x14384fff] PGTABLE
BRK [0x14385000, 0x14385fff] PGTABLE
BRK [0x14386000, 0x14386fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x3ea78000-0x3fffafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DFBFE014 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000DFBD2188 0000EC (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
ACPI: FACP 0x00000000DFBF9000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: DSDT 0x00000000DFBEA000 008CE4 (v01 HPQOEM SLIC-MPC 00040000 ACPI 00040000)
ACPI: FACS 0x00000000DFB48000 000040
ACPI: UEFI 0x00000000DFBFD000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: MSDM 0x00000000DFBFC000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: ASF! 0x00000000DFBFB000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: BOOT 0x00000000DFBFA000 000028 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: HPET 0x00000000DFBF8000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: APIC 0x00000000DFBF7000 000090 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: MCFG 0x00000000DFBF6000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: SPCR 0x00000000DFBF5000 000050 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: WDAT 0x00000000DFBF4000 00017C (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: WDRT 0x00000000DFBF3000 000047 (v01 HPQOEM INSYDE 00000000 HP 00040000)
ACPI: UEFI 0x00000000DFBE9000 000042 (v01 HPQOEM INSYDE 00000000 HP 00040000)
ACPI: SSDT 0x00000000DFBE2000 006616 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: SSDT 0x00000000DFBE1000 0009F8 (v01 HPQOEM INSYDE 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000DFBD8000 00888F (v02 HPQOEM INSYDE 00000002 ACPI 00040000)
ACPI: IVRS 0x00000000DFBD7000 0000D0 (v02 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: CRAT 0x00000000DFBD6000 000550 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: SSDT 0x00000000DFBD5000 000482 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
ACPI: TPM2 0x00000000DFBD4000 000034 (v03 HPQOEM INSYDE 00000002 HP 00040000)
ACPI: SSDT 0x00000000DFBD3000 000692 (v01 HPQOEM INSYDE 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000DFBD0000 001A89 (v01 HPQOEM INSYDE 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000DFBCE000 00165E (v01 HPQOEM INSYDE 00000001 ACPI 00040000)
ACPI: FPDT 0x00000000DFBCD000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000)
ACPI: SSDT 0x00000000DFBCA000 0021DF (v01 HPQOEM INSYDE 00000001 ACPI 00040000)
ACPI: BGRT 0x00000000DFBC9000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001feffffff]
NODE_DATA(0) allocated [mem 0x1fefd3000-0x1feffdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000001feffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000087fff]
node 0: [mem 0x0000000000100000-0x00000000def7efff]
node 0: [mem 0x00000000dfbff000-0x00000000dfbfffff]
node 0: [mem 0x0000000100000000-0x00000001feffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000001feffffff]
On node 0 totalpages: 1957639
DMA zone: 64 pages used for memmap
DMA zone: 1134 pages reserved
DMA zone: 3975 pages, LIFO batch:0
DMA32 zone: 14206 pages used for memmap
DMA32 zone: 909184 pages, LIFO batch:31
Normal zone: 16320 pages used for memmap
Normal zone: 1044480 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
PM: Registered nosave memory: [mem 0xd4c2e000-0xd4c2efff]
PM: Registered nosave memory: [mem 0xd4c3d000-0xd4c3dfff]
PM: Registered nosave memory: [mem 0xdef7f000-0xdf87efff]
PM: Registered nosave memory: [mem 0xdf87f000-0xdfb7efff]
PM: Registered nosave memory: [mem 0xdfb7f000-0xdfbfefff]
PM: Registered nosave memory: [mem 0xdfc00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf01fffff]
PM: Registered nosave memory: [mem 0xf0200000-0xf02fffff]
PM: Registered nosave memory: [mem 0xf0300000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xe0000000-0xf01fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff8cde3ec00000 s108888 r8192 d30376 u524288
pcpu-alloc: s108888 r8192 d30376 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1925915
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.6-201.fc25.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 7537952K/7830556K available (8690K kernel code, 1650K rwdata, 3600K rodata, 2124K init, 1816K bss, 292604K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:524544 nr_irqs:1000 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2395.504 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.00 BogoMIPS (lpj=2395504)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170119
ACPI: 9 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 31898 entries in 125 pages
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-9600P RADEON R5, 10 COMPUTE CORES 4C+6G (family: 0x15, model: 0x65, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19094.24 BogoMIPS)
sched_clock: Marking stable (192000000, 0)->(541736384, -349736384)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdf87f000-0xdfb7efff] (3145728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 2:32:09, date: 07/08/17
NET: Registered protocol family 16
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x44 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
platform wdat_wdt: failed to claim resource 1: [mem 0xfeb00004-0xfeb00008]
ACPI: watchdog: Device creation failed: -16
ACPI: Power Resource [P0U2] (off)
ACPI: Power Resource [P3U2] (off)
ACPI: Power Resource [P0U3] (off)
ACPI: Power Resource [P3U3] (off)
ACPI: Power Resource [P0ST] (on)
ACPI: Power Resource [P3ST] (on)
ACPI: Power Resource [P0SA] (off)
ACPI: Power Resource [P3SA] (off)
ACPI: Power Resource [P0SD] (off)
ACPI: Power Resource [P3SD] (off)
ACPI Error: [WLVD] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_SB.WLBU._STA] (Node ffff8cde368ab5f0), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: [WLVD] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_SB.WLBU._STA] (Node ffff8cde368ab5f0), AE_NOT_FOUND (20170119/psparse-543)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cfbff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
pci 0000:00:00.2: [1022:1577] type 00 class 0x080600
pci 0000:00:01.0: [1002:9874] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xf0800000-0xf0ffffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0x4000-0x40ff]
pci 0000:00:01.0: reg 0x24: [mem 0xf0500000-0xf053ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xf0560000-0xf0563fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
pci 0000:00:02.2: [1022:157c] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: [1022:157c] type 01 class 0x060400
pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: System wakeup disabled by ACPI
pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
pci 0000:00:03.1: [1022:157c] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: System wakeup disabled by ACPI
pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xf0540000-0xf055ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xf0300000-0xf03fffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xf0570000-0xf0570fff]
pci 0000:00:08.0: reg 0x24: [mem 0xf056a000-0xf056bfff]
pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
pci 0000:00:09.2: reg 0x10: [mem 0xf0564000-0xf0567fff]
pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xf0568000-0xf0569fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7904] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
pci 0000:00:11.0: reg 0x24: [mem 0xf056c000-0xf056c3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320
pci 0000:00:12.0: reg 0x10: [mem 0xf056e000-0xf056e0ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:14.7: [1022:7906] type 00 class 0x080501
pci 0000:00:14.7: reg 0x10: [mem 0xf056d000-0xf056d0ff 64bit]
pci 0000:00:14.7: PME# supported from D3cold
pci 0000:00:18.0: [1022:1570] type 00 class 0x060000
pci 0000:00:18.1: [1022:1571] type 00 class 0x060000
pci 0000:00:18.2: [1022:1572] type 00 class 0x060000
pci 0000:00:18.3: [1022:1573] type 00 class 0x060000
pci 0000:00:18.4: [1022:1574] type 00 class 0x060000
pci 0000:00:18.5: [1022:1575] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x18: [mem 0xf0400000-0xf0400fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xf0100000-0xf0103fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.2: bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:02.2: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
pci 0000:02:00.0: [10ec:8179] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf1000000-0xf1003fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.4: PCI bridge to [bus 02-04]
pci 0000:00:02.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.4: bridge window [mem 0xf1000000-0xf10fffff]
pci 0000:00:02.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 05]
ACPI: IRQ 7 override to edge, high
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 6 10 11) *0, disabled.
ACPI Error: [WLVD] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_SB.WLBU._STA] (Node ffff8cde368ab5f0), AE_NOT_FOUND (20170119/psparse-543)
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:00:01.0: vgaarb: setting as boot VGA device
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:01.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
e820: reserve RAM buffer [mem 0xd4c2e018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xdef7f000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdfc00000-0xdfffffff]
e820: reserve RAM buffer [mem 0x1ff000000-0x1ffffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xf0200000-0xf02fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs FUJ7401 PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs SYN3223 PNP0f13 (active)
system 00:04: [io 0x0400-0x04cf] has been reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cdb] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0xff800000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
ACPI Error: [WLVD] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_SB.WLBU._STA] (Node ffff8cde368ab5f0), AE_NOT_FOUND (20170119/psparse-543)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:03.1: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
pci 0000:00:03.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
pci 0000:00:03.1: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
pci 0000:00:03.1: BAR 14: assigned [mem 0xf0600000-0xf07fffff]
pci 0000:00:03.1: BAR 15: assigned [mem 0xf1100000-0xf12fffff 64bit pref]
pci 0000:00:01.0: BAR 6: assigned [mem 0xf0580000-0xf059ffff pref]
pci 0000:00:03.1: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.2: bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:02.2: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
pci 0000:00:02.4: PCI bridge to [bus 02-04]
pci 0000:00:02.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.4: bridge window [mem 0xf1000000-0xf10fffff]
pci 0000:00:02.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 05]
pci 0000:00:03.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:03.1: bridge window [mem 0xf0600000-0xf07fffff]
pci 0000:00:03.1: bridge window [mem 0xf1100000-0xf12fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf0400000-0xf04fffff]
pci_bus 0000:01: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf1000000-0xf10fffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:05: resource 1 [mem 0xf0600000-0xf07fffff]
pci_bus 0000:05: resource 2 [mem 0xf1100000-0xf12fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 22028K
AMD-Vi: IOMMU performance counters supported
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
iommu: Adding device 0000:00:01.0 to group 0
iommu: Using direct mapping for device 0000:00:01.0
iommu: Adding device 0000:00:01.1 to group 0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Adding device 0000:00:02.2 to group 1
iommu: Adding device 0000:00:02.4 to group 1
iommu: Adding device 0000:00:03.0 to group 2
iommu: Adding device 0000:00:03.1 to group 2
iommu: Adding device 0000:00:08.0 to group 3
iommu: Adding device 0000:00:09.0 to group 4
iommu: Adding device 0000:00:09.2 to group 4
iommu: Adding device 0000:00:10.0 to group 5
iommu: Adding device 0000:00:11.0 to group 6
iommu: Adding device 0000:00:12.0 to group 7
iommu: Adding device 0000:00:14.0 to group 8
iommu: Adding device 0000:00:14.3 to group 8
iommu: Adding device 0000:00:14.7 to group 8
iommu: Adding device 0000:00:18.0 to group 9
iommu: Adding device 0000:00:18.1 to group 9
iommu: Adding device 0000:00:18.2 to group 9
iommu: Adding device 0000:00:18.3 to group 9
iommu: Adding device 0000:00:18.4 to group 9
iommu: Adding device 0000:00:18.5 to group 9
iommu: Adding device 0000:01:00.0 to group 1
iommu: Adding device 0000:02:00.0 to group 1
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0x37ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000007ff)
perf: amd_iommu: Detected. (0 banks, 0 counters/bank)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1499481129.881:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 4224k, total 4224k
efifb: mode is 1366x768x32, linelength=5632, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
ACPI: AC Adapter [ACAD] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TSZ0] (42 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TSZ2] (20 C)
GHES: HEST is not enabled!
dw-apb-uart AMD0020:00: clock rate not defined
dw-apb-uart: probe of AMD0020:00 failed with error -22
dw-apb-uart AMD0020:01: clock rate not defined
dw-apb-uart: probe of AMD0020:01 failed with error -22
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m1024@0xf056c000 port 0xf056c100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xf056c000 port 0xf056c180 irq 19
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.0: EHCI Host Controller
ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.0: debug port 2
ehci-pci 0000:00:12.0: irq 18, io mem 0xf056e000
ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.11.6-201.fc25.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.11.6-201.fc25.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.11.6-201.fc25.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:00:10.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
ACPI: Battery Slot [BAT1] (battery present)
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
microcode: CPU0: patch_level=0x06006118
microcode: CPU1: patch_level=0x06006118
microcode: CPU2: patch_level=0x06006118
microcode: CPU3: patch_level=0x06006118
microcode: Microcode Update Driver: v2.2.
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'Fedora kernel signing key: 2ee9bd9e452481fd75fcb0af51c020701b6df716'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
Magic number: 9:293:510
rtc_cmos 00:01: setting system clock to 2017-07-08 02:32:11 UTC (1499481131)
PM: Hibernation image not present or could not be loaded.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=0438, idProduct=7900
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-10: Crucial_CT250MX200SSD1, MU03, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata2.00: ATAPI: hp DVDRW DU8AESH, 6H61, max UDMA/133
random: fast init done
usb 2-1: New USB device found, idVendor=04f2, idProduct=b56c
usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 2-1: Product: HP TrueVision HD
usb 2-1: Manufacturer: Generic
usb 2-1: SerialNumber: 200901010001
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Crucial_CT250MX2 MU03 PQ: 0 ANSI: 5
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata2.00: configured for UDMA/133
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
sda: sda1 sda2 sda3
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM hp DVDRW DU8AESH 6H61 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 2124K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1536K
Freeing unused kernel memory: 496K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Local File Systems.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Timers.
systemd[1]: Listening on Journal Audit Socket.
audit: type=1130 audit(1499481132.155:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
tsc: Refined TSC clocksource calibration: 2395.503 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22879f329da, max_idle_ns: 440795240351 ns
psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786
audit: type=1130 audit(1499481132.265:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
audit: type=1130 audit(1499481132.366:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1499481132.496:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1499481132.588:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1499481132.603:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1499481132.656:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1499481132.831:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1499481132.867:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:01:00.0 eth0: RTL8106e at 0xffffa8d3c0cc5000, c8:d3:ff:23:65:3a, XID 04900000 IRQ 33
8021q: 802.1Q VLAN Support v1.8
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7906] (rev 1)
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
r8169 0000:01:00.0 enp1s0: renamed from eth0
clocksource: Switched to clocksource tsc
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
Found CRAT image with size=1360
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=4 id_base=16
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU GPU: simds=40 id_base=-2147483648
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=17
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=19
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 420000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (CARRIZO 0x1002:0x9874 0x103C:0x81F9 0xCA).
[drm] register mmio base: 0xF0500000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xF0800000
[drm] doorbell mmio size: 8388608
[drm] UVD is enabled in physical mode
[drm] VCE enabled in physical mode
[drm] BIOS signature incorrect 0 0
ATOM BIOS: CARRIZO
[drm] GPU post is not needed
amdgpu 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
amdgpu 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=512M
[drm] RAM width 64bits UNKNOWN
[TTM] Zone kernel: Available graphics memory: 3845418 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 512M of VRAM memory ready
[drm] amdgpu: 1024M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:00:01.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
amdgpu: [powerplay] amdgpu: powerplay sw initialized
[drm] amdgpu atom DIG backlight initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] eDP-1
[drm] HPD1
[drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] DP-1
[drm] HPD3
[drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
amdgpu 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000010, cpu addr 0xffff8cde2f808010
amdgpu 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000020, cpu addr 0xffff8cde2f808020
amdgpu 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000030, cpu addr 0xffff8cde2f808030
amdgpu 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000040, cpu addr 0xffff8cde2f808040
amdgpu 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000050, cpu addr 0xffff8cde2f808050
amdgpu 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000020000060, cpu addr 0xffff8cde2f808060
amdgpu 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000070, cpu addr 0xffff8cde2f808070
amdgpu 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000080, cpu addr 0xffff8cde2f808080
amdgpu 0000:00:01.0: fence driver on ring 8 use gpu addr 0x0000000020000090, cpu addr 0xffff8cde2f808090
amdgpu 0000:00:01.0: fence driver on ring 9 use gpu addr 0x00000000200000a0, cpu addr 0xffff8cde2f8080a0
amdgpu 0000:00:01.0: fence driver on ring 10 use gpu addr 0x00000000200000b0, cpu addr 0xffff8cde2f8080b0
amdgpu 0000:00:01.0: fence driver on ring 11 use gpu addr 0x00000000200000c0, cpu addr 0xffff8cde2f8080c0
[drm] Found UVD firmware Version: 1.87 Family ID: 11
amdgpu 0000:00:01.0: fence driver on ring 12 use gpu addr 0x00000000002946e0, cpu addr 0xffffa8d3c24416e0
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
amdgpu 0000:00:01.0: fence driver on ring 13 use gpu addr 0x00000000200000e0, cpu addr 0xffff8cde2f8080e0
amdgpu 0000:00:01.0: fence driver on ring 14 use gpu addr 0x00000000200000f0, cpu addr 0xffff8cde2f8080f0
[drm] ring test on 1 succeeded in 7 usecs
[drm] ring test on 2 succeeded in 12 usecs
[drm] ring test on 3 succeeded in 9 usecs
[drm] ring test on 4 succeeded in 7 usecs
[drm] ring test on 5 succeeded in 6 usecs
[drm] ring test on 6 succeeded in 6 usecs
[drm] ring test on 7 succeeded in 7 usecs
[drm] ring test on 8 succeeded in 7 usecs
[drm] ring test on 9 succeeded in 7 usecs
[drm] ring test on 10 succeeded in 2 usecs
[drm] ring test on 11 succeeded in 2 usecs
[drm] ring test on 12 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 13 succeeded in 10 usecs
[drm] ring test on 14 succeeded in 2 usecs
[drm] VCE initialized successfully.
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
[drm] fb mappable at 0x1FF615000
[drm] vram apper at 0x1FF000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: amdgpudrmfb (fb0) is primary device
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
Console: switching to colour frame buffer device 170x48
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
amdgpu: [powerplay] min_core_set_clock not set
kfd kfd: Allocated 3944480 bytes on gart for device(1002:9874)
amdkfd: adding doorbell packet type capability
kfd kfd: added device (1002:9874)
[drm] Initialized amdgpu 3.10.0 20150101 for 0000:00:01.0 on minor 0
audit: type=1130 audit(1499481138.515:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1499481138.556:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1499481138.813:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1499481138.813:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1499481139.066:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1499481139.089:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1499481139.089:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1499481139.092:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1499481139.094:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1499481139.094:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[209]: Received SIGTERM from PID 1 (systemd).
systemd: 15 output lines suppressed due to ratelimiting
SELinux: 32768 avtab hash slots, 107090 rules.
SELinux: 32768 avtab hash slots, 107090 rules.
SELinux: 8 users, 14 roles, 5072 types, 310 bools, 1 sens, 1024 cats
SELinux: 94 classes, 107090 rules
SELinux: Class sctp_socket not defined in policy.
SELinux: Class icmp_socket not defined in policy.
SELinux: Class ax25_socket not defined in policy.
SELinux: Class ipx_socket not defined in policy.
SELinux: Class netrom_socket not defined in policy.
SELinux: Class atmpvc_socket not defined in policy.
SELinux: Class x25_socket not defined in policy.
SELinux: Class rose_socket not defined in policy.
SELinux: Class decnet_socket not defined in policy.
SELinux: Class atmsvc_socket not defined in policy.
SELinux: Class rds_socket not defined in policy.
SELinux: Class irda_socket not defined in policy.
SELinux: Class pppox_socket not defined in policy.
SELinux: Class llc_socket not defined in policy.
SELinux: Class can_socket not defined in policy.
SELinux: Class tipc_socket not defined in policy.
SELinux: Class bluetooth_socket not defined in policy.
SELinux: Class iucv_socket not defined in policy.
SELinux: Class rxrpc_socket not defined in policy.
SELinux: Class isdn_socket not defined in policy.
SELinux: Class phonet_socket not defined in policy.
SELinux: Class ieee802154_socket not defined in policy.
SELinux: Class caif_socket not defined in policy.
SELinux: Class alg_socket not defined in policy.
SELinux: Class nfc_socket not defined in policy.
SELinux: Class vsock_socket not defined in policy.
SELinux: Class kcm_socket not defined in policy.
SELinux: Class qipcrtr_socket not defined in policy.
SELinux: Class smc_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
systemd[1]: Successfully loaded SELinux policy in 260.838ms.
systemd[1]: Relabelled /dev and /run in 67.817ms.
EXT4-fs (dm-0): re-mounted. Opts: (null)
systemd-journald[622]: Received request to flush runtime journal from PID 1
Initializing HPQ6001 module
input: HP Wireless hotkeys as /devices/virtual/input/input6
ACPI Error: [WLVD] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_SB.WLBU._STA] (Node ffff8cde368ab5f0), AE_NOT_FOUND (20170119/psparse-543)
------------[ cut here ]------------
WARNING: CPU: 3 PID: 660 at drivers/i2c/busses/i2c-designware-core.c:293 i2c_dw_clk_rate+0x41/0x50 [i2c_designware_core]
Modules linked in: acpi_cpufreq(+) video(+) tpm_tis tpm_tis_core tpm hp_wireless i2c_designware_platform(+) i2c_designware_core amdkfd amd_iommu_v2 amdgpu i2c_algo_bit drm_kms_helper crc32c_intel sdhci_pci ttm serio_raw sdhci drm 8021q mmc_core garp stp llc mrp r8169 mii
CPU: 3 PID: 660 Comm: systemd-udevd Not tainted 4.11.6-201.fc25.x86_64 #1
Hardware name: HP HP Notebook/81F9, BIOS F.17 09/01/2016
Call Trace:
dump_stack+0x63/0x86
__warn+0xcb/0xf0
warn_slowpath_null+0x1d/0x20
i2c_dw_clk_rate+0x41/0x50 [i2c_designware_core]
i2c_dw_init+0x2f9/0x610 [i2c_designware_core]
i2c_dw_probe+0x35/0x8c0 [i2c_designware_core]
dw_i2c_plat_probe+0x306/0x580 [i2c_designware_platform]
platform_drv_probe+0x3b/0xa0
driver_probe_device+0x2bb/0x460
__driver_attach+0xdf/0xf0
? driver_probe_device+0x460/0x460
bus_for_each_dev+0x6c/0xc0
driver_attach+0x1e/0x20
bus_add_driver+0x170/0x270
driver_register+0x60/0xe0
? 0xffffffffc01d6000
__platform_driver_register+0x36/0x40
dw_i2c_init_driver+0x17/0x1000 [i2c_designware_platform]
do_one_initcall+0x52/0x1a0
? kmem_cache_alloc_trace+0x159/0x1b0
? do_init_module+0x27/0x1f8
do_init_module+0x5f/0x1f8
load_module+0x27cc/0x2be0
SYSC_init_module+0x173/0x190
? SYSC_init_module+0x173/0x190
SyS_init_module+0xe/0x10
do_syscall_64+0x67/0x180
entry_SYSCALL64_slow_path+0x25/0x25
RIP: 0033:0x7f890d3c046a
RSP: 002b:00007ffec4e40f68 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
RAX: ffffffffffffffda RBX: 0000558f3a6ba4b0 RCX: 00007f890d3c046a
RDX: 00007f890def8995 RSI: 0000000000004833 RDI: 0000558f3a6cc840
RBP: 00007f890def8995 R08: 0000558f3a6be060 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000558f3a6cc840
R13: 0000558f3a6b2200 R14: 0000000000020000 R15: 0000558f3a6ba4b0
---[ end trace 03c164ae8f69e959 ]---
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
acpi_cpufreq: overriding BIOS provided _PSD data
ACPI Error: [WLVD] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_SB.WLBU._STA] (Node ffff8cde368ab5f0), AE_NOT_FOUND (20170119/psparse-543)
tpm_crb MSFT0101:00: can't request region for resource [mem 0xdfb7a000-0xdfb7dfff]
tpm_crb: probe of MSFT0101:00 failed with error -16
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x790b, Revision ID: 0x4a
sp5100_tco: I/O address 0x0cd6 already in use
media: Linux media interface: v0.10
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
Linux video capture interface: v2.00
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input8
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:09.2/sound/card1/input9
Adding 7823356k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:7823356k SSFS
uvcvideo: Found UVC 1.00 device HP TrueVision HD (04f2:b56c)
uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized!
input: HP TrueVision HD as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
rtl8188ee: rtl8188ee: Power Save off (module option)
rtl8188ee: rtl8188ee: FW Power Save off (module option)
rtl8188ee: Using firmware rtlwifi/rtl8188efw.bin
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: rtlwifi: wireless switch is on
rtl8188ee 0000:02:00.0 wlo1: renamed from wlan0
input: HP WMI hotkeys as /devices/virtual/input/input10
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
random: crng init done
snd_hda_intel 0000:00:01.1: azx_get_response timeout, switching to polling mode: last cmd=0x000f0001
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input12
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
tun: Universal TUN/TAP device driver, 1.6
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
wlo1: authenticate with 00:18:39:58:81:e3
wlo1: send auth to 00:18:39:58:81:e3 (try 1/3)
wlo1: authenticated
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
rtl8188ee 0000:02:00.0 wlo1: disabling HT as WMM/QoS is not supported by the AP
rtl8188ee 0000:02:00.0 wlo1: disabling VHT as WMM/QoS is not supported by the AP
wlo1: associate with 00:18:39:58:81:e3 (try 1/3)
wlo1: RX AssocResp from 00:18:39:58:81:e3 (capab=0x411 status=0 aid=2)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
virbr0: port 1(virbr0-nic) entered disabled state
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
fuse init (API version 7.26)
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
show_signal_msg: 58 callbacks suppressed
lxpanel[1629]: segfault at 2 ip 00007f507d08acb0 sp 00007ffec7917080 error 4 in libc-2.24.so[7f507cfc8000+1bc000]
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] min_core_set_clock not set
amdgpu: [powerplay] pp_dpm_get_sclk_od was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.