dmesg - bb
Linux version 4.11.7-1-ARCH (builduser@tobias) (gcc version 7.1.1 20170621 (GCC) ) #1 SMP PREEMPT Sat Jun 24 09:07:09 CEST 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000081c7bfff] usable
BIOS-e820: [mem 0x0000000081c7c000-0x0000000081c7cfff] ACPI NVS
BIOS-e820: [mem 0x0000000081c7d000-0x0000000081c7dfff] reserved
BIOS-e820: [mem 0x0000000081c7e000-0x0000000089c11fff] usable
BIOS-e820: [mem 0x0000000089c12000-0x0000000089f8bfff] reserved
BIOS-e820: [mem 0x0000000089f8c000-0x000000008a0fafff] usable
BIOS-e820: [mem 0x000000008a0fb000-0x000000008a7a5fff] ACPI NVS
BIOS-e820: [mem 0x000000008a7a6000-0x000000008aefefff] reserved
BIOS-e820: [mem 0x000000008aeff000-0x000000008aefffff] usable
BIOS-e820: [mem 0x000000008af00000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000046effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x7ed40018-0x7ed5fa57] usable ==> usable
e820: update [mem 0x7ed2f018-0x7ed3f057] usable ==> usable
e820: update [mem 0x81d31018-0x81d3d057] usable ==> usable
e820: update [mem 0x7ed1e018-0x7ed2ee57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000007ed1e017] usable
reserve setup_data: [mem 0x000000007ed1e018-0x000000007ed2ee57] usable
reserve setup_data: [mem 0x000000007ed2ee58-0x000000007ed2f017] usable
reserve setup_data: [mem 0x000000007ed2f018-0x000000007ed3f057] usable
reserve setup_data: [mem 0x000000007ed3f058-0x000000007ed40017] usable
reserve setup_data: [mem 0x000000007ed40018-0x000000007ed5fa57] usable
reserve setup_data: [mem 0x000000007ed5fa58-0x0000000081c7bfff] usable
reserve setup_data: [mem 0x0000000081c7c000-0x0000000081c7cfff] ACPI NVS
reserve setup_data: [mem 0x0000000081c7d000-0x0000000081c7dfff] reserved
reserve setup_data: [mem 0x0000000081c7e000-0x0000000081d31017] usable
reserve setup_data: [mem 0x0000000081d31018-0x0000000081d3d057] usable
reserve setup_data: [mem 0x0000000081d3d058-0x0000000089c11fff] usable
reserve setup_data: [mem 0x0000000089c12000-0x0000000089f8bfff] reserved
reserve setup_data: [mem 0x0000000089f8c000-0x000000008a0fafff] usable
reserve setup_data: [mem 0x000000008a0fb000-0x000000008a7a5fff] ACPI NVS
reserve setup_data: [mem 0x000000008a7a6000-0x000000008aefefff] reserved
reserve setup_data: [mem 0x000000008aeff000-0x000000008aefffff] usable
reserve setup_data: [mem 0x000000008af00000-0x000000008fffffff] reserved
reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000046effffff] usable
efi: EFI v2.50 by American Megatrends
efi: ACPI 2.0=0x8a3fb000 ACPI=0x8a3fb000 SMBIOS=0x8adb6000 SMBIOS 3.0=0x8adb5000 MPS=0xfca10 ESRT=0x8872c158
SMBIOS 3.0.0 present.
DMI: Gigabyte Technology Co., Ltd. Z270X-Gaming 7/Z270X-Gaming 7, BIOS F4 02/10/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x46f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 008C000000 mask 7FFC000000 uncachable
4 base 008B800000 mask 7FFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x8af00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fccd0-0x000fccdf] mapped at [ffff8800000fccd0]
esrt: Reserving ESRT space from 0x000000008872c158 to 0x000000008872c190.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x01d42000, 0x01d42fff] PGTABLE
BRK [0x01d43000, 0x01d43fff] PGTABLE
BRK [0x01d44000, 0x01d44fff] PGTABLE
BRK [0x01d45000, 0x01d45fff] PGTABLE
BRK [0x01d46000, 0x01d46fff] PGTABLE
BRK [0x01d47000, 0x01d47fff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x7ed60000-0x7f430fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008A3FB000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000008A3FB0A0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000008A423318 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000008A3FB200 028111 (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000008A7A5C40 000040
ACPI: APIC 0x000000008A423430 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000008A4234F0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000008A423538 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: FIDT 0x000000008A423578 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000008A423618 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000008A426770 002544 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x000000008A428CB8 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000008A428CF0 000E3B (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x000000008A429B30 0008FF (v02 INTEL xh_rvp10 00000000 INTL 20160422)
ACPI: UEFI 0x000000008A42A430 000042 (v01 INTEL EDK2 00000002 01000013)
ACPI: SSDT 0x000000008A42A478 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000008A42B358 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: WSMT 0x000000008A42B3F0 000028 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000008A42B418 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000008A42B6B8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x000000008A42E6C0 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000008A42E6F8 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: BGRT 0x000000008A42E750 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x000000008A42E788 0000A8 (v01 INTEL KBL 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000046effffff]
NODE_DATA(0) allocated [mem 0x46eff7000-0x46effbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000046effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x0000000081c7bfff]
node 0: [mem 0x0000000081c7e000-0x0000000089c11fff]
node 0: [mem 0x0000000089f8c000-0x000000008a0fafff]
node 0: [mem 0x000000008aeff000-0x000000008aefffff]
node 0: [mem 0x0000000100000000-0x000000046effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000046effffff]
On node 0 totalpages: 4164893
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 8758 pages used for memmap
DMA32 zone: 560512 pages, LIFO batch:31
Normal zone: 56256 pages used for memmap
Normal zone: 3600384 pages, LIFO batch:31
Reserving Intel graphics memory at 0x000000008c000000-0x000000008fffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x7ed1e000-0x7ed1efff]
PM: Registered nosave memory: [mem 0x7ed2e000-0x7ed2efff]
PM: Registered nosave memory: [mem 0x7ed2f000-0x7ed2ffff]
PM: Registered nosave memory: [mem 0x7ed3f000-0x7ed3ffff]
PM: Registered nosave memory: [mem 0x7ed40000-0x7ed40fff]
PM: Registered nosave memory: [mem 0x7ed5f000-0x7ed5ffff]
PM: Registered nosave memory: [mem 0x81c7c000-0x81c7cfff]
PM: Registered nosave memory: [mem 0x81c7d000-0x81c7dfff]
PM: Registered nosave memory: [mem 0x81d31000-0x81d31fff]
PM: Registered nosave memory: [mem 0x81d3d000-0x81d3dfff]
PM: Registered nosave memory: [mem 0x89c12000-0x89f8bfff]
PM: Registered nosave memory: [mem 0x8a0fb000-0x8a7a5fff]
PM: Registered nosave memory: [mem 0x8a7a6000-0x8aefefff]
PM: Registered nosave memory: [mem 0x8af00000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff88046ec00000 s103256 r8192 d31912 u262144
pcpu-alloc: s103256 r8192 d31912 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4099790
Policy zone: Normal
DMAR: IOMMU enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16155696K/16659572K available (6484K kernel code, 1091K rwdata, 2020K rodata, 1304K init, 904K bss, 503876K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:2048 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 4200.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8403.00 BogoMIPS (lpj=14000000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170119
ACPI: 8 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 24K
ftrace: allocating 25552 entries in 100 pages
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x00000089ede000 end: 0x00000089efdfff
DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz (family: 0x6, model: 0x9e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (67235.46 BogoMIPS)
sched_clock: Marking stable (886666579, 0)->(886084519, 582060)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x81c7c000-0x81c7cfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8a0fb000-0x8a7a5fff] (6991872 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 1:57:08, date: 07/03/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 35 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045E031000 00081F (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045BEC5000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xefffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-7e]
pci 0000:00:00.0: [8086:591f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:5912] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xec000000-0xecffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xee24e000-0xee24efff 64bit]
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xee230000-0xee23ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xee24d000-0xee24dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xee248000-0xee249fff]
pci 0000:00:17.0: reg 0x14: [mem 0xee24c000-0xee24c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xee24b000-0xee24b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1b.2: [8086:a2e9] type 01 class 0x060400
pci 0000:00:1b.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.2: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1b.2: System wakeup disabled by ACPI
pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400
pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.4: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1b.4: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:a291] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:a292] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a2c5] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xee244000-0xee247fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xee240000-0xee243fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xee220000-0xee22ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xee24a000-0xee24a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xee200000-0xee21ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:01:00.0: [10de:1b06] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xed000000-0xedffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xee000000-0xee07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:10ef] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xee080000-0xee083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xed000000-0xee0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.2: PCI bridge to [bus 03]
pci 0000:00:1b.4: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:07:00.0: [1969:e0b1] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xee100000-0xee13ffff 64bit]
pci 0000:07:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xee100000-0xee1fffff]
pci 0000:08:00.0: [8086:15d3] type 01 class 0x060400
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 08-40]
pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xebffffff]
pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xd5ffffff 64bit pref]
pci 0000:08:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci_bus 0000:09: busn_res: can not insert [bus 09-ff] under [bus 08-40] (conflicts with (null) [bus 08-40])
pci 0000:09:00.0: [8086:15d3] type 01 class 0x060400
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:01.0: [8086:15d3] type 01 class 0x060400
pci 0000:09:01.0: supports D1 D2
pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:02.0: [8086:15d3] type 01 class 0x060400
pci 0000:09:02.0: supports D1 D2
pci 0000:09:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: PCI bridge to [bus 09-ff]
pci 0000:08:00.0: bridge window [io 0x0000-0x0fff]
pci 0000:08:00.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:08:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
pci 0000:09:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:09:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:09:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:09:00.0: PCI bridge to [bus 0a-ff]
pci 0000:09:00.0: bridge window [io 0x0000-0x0fff]
pci 0000:09:00.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:09:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
pci_bus 0000:0a: busn_res: [bus 0a-ff] end is updated to 0a
pci 0000:09:01.0: PCI bridge to [bus 0b-ff]
pci 0000:09:01.0: bridge window [io 0x0000-0x0fff]
pci 0000:09:01.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:09:01.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
pci_bus 0000:0b: busn_res: [bus 0b-ff] end is updated to 0b
pci 0000:0c:00.0: [8086:15d4] type 00 class 0x0c0330
pci 0000:0c:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
pci 0000:0c:00.0: supports D1 D2
pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:02.0: PCI bridge to [bus 0c-ff]
pci 0000:09:02.0: bridge window [io 0x0000-0x0fff]
pci 0000:09:02.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:09:02.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
pci_bus 0000:0c: busn_res: [bus 0c-ff] end is updated to 0c
pci_bus 0000:09: busn_res: [bus 09-ff] end is updated to 0c
pci 0000:00:1d.0: PCI bridge to [bus 41]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 7 GPEs in block 00 to 7F
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: no bridge control possible
vgaarb: loaded
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7ed1e018-0x7fffffff]
e820: reserve RAM buffer [mem 0x7ed2f018-0x7fffffff]
e820: reserve RAM buffer [mem 0x7ed40018-0x7fffffff]
e820: reserve RAM buffer [mem 0x81c7c000-0x83ffffff]
e820: reserve RAM buffer [mem 0x81d31018-0x83ffffff]
e820: reserve RAM buffer [mem 0x89c12000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8a0fb000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8af00000-0x8bffffff]
e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: [io 0x0a40-0x0a4f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xeffe0000-0xefffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0xff00-0xfffe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:09:01.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
pci 0000:09:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
pci 0000:09:01.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
pci 0000:08:00.0: bridge window [io 0x1000-0x0fff] to [bus 09-0c] add_size 1000
pci 0000:08:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09-0c] add_size 200000 add_align 100000
pci 0000:08:00.0: bridge window [mem 0x00100000-0x001fffff] to [bus 09-0c] add_size 200000 add_align 100000
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 08-40] add_size 1000
pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xed000000-0xee0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 02]
pci 0000:00:1b.2: PCI bridge to [bus 03]
pci 0000:00:1b.4: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xee100000-0xee1fffff]
pci 0000:08:00.0: BAR 14: assigned [mem 0xdc000000-0xdc2fffff]
pci 0000:08:00.0: BAR 15: assigned [mem 0xd4000000-0xd41fffff 64bit pref]
pci 0000:08:00.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:09:01.0: BAR 14: assigned [mem 0xdc000000-0xdc1fffff]
pci 0000:09:01.0: BAR 15: assigned [mem 0xd4000000-0xd41fffff 64bit pref]
pci 0000:09:02.0: BAR 14: assigned [mem 0xdc200000-0xdc2fffff]
pci 0000:09:01.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:09:00.0: PCI bridge to [bus 0a]
pci 0000:09:01.0: PCI bridge to [bus 0b]
pci 0000:09:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:09:01.0: bridge window [mem 0xdc000000-0xdc1fffff]
pci 0000:09:01.0: bridge window [mem 0xd4000000-0xd41fffff 64bit pref]
pci 0000:0c:00.0: BAR 0: assigned [mem 0xdc200000-0xdc20ffff]
pci 0000:09:02.0: PCI bridge to [bus 0c]
pci 0000:09:02.0: bridge window [mem 0xdc200000-0xdc2fffff]
pci 0000:08:00.0: PCI bridge to [bus 09-0c]
pci 0000:08:00.0: bridge window [io 0x2000-0x2fff]
pci 0000:08:00.0: bridge window [mem 0xdc000000-0xdc2fffff]
pci 0000:08:00.0: bridge window [mem 0xd4000000-0xd41fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08-40]
pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.4: bridge window [mem 0xdc000000-0xebffffff]
pci 0000:00:1c.4: bridge window [mem 0xd4000000-0xd5ffffff 64bit pref]
pci 0000:00:1d.0: PCI bridge to [bus 41]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xefffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xed000000-0xee0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xee100000-0xee1fffff]
pci_bus 0000:08: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:08: resource 1 [mem 0xdc000000-0xebffffff]
pci_bus 0000:08: resource 2 [mem 0xd4000000-0xd5ffffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:09: resource 1 [mem 0xdc000000-0xdc2fffff]
pci_bus 0000:09: resource 2 [mem 0xd4000000-0xd41fffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:0b: resource 1 [mem 0xdc000000-0xdc1fffff]
pci_bus 0000:0b: resource 2 [mem 0xd4000000-0xd41fffff 64bit pref]
pci_bus 0000:0c: resource 1 [mem 0xdc200000-0xdc2fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:08:00.0: enabling device (0000 -> 0003)
pci 0000:09:02.0: enabling device (0000 -> 0002)
pci 0000:0c:00.0: enabling device (0000 -> 0002)
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 6980K
DMAR: No ATSR found
DMAR: dmar0: Using Queued invalidation
dmar0: Allocated order 8 PASID table.
DMAR: dmar1: Using Queued invalidation
DMAR: Setting RMRR:
DMAR: Setting identity map for device 0000:00:02.0 [0x8b800000 - 0x8fffffff]
DMAR: Setting identity map for device 0000:00:14.0 [0x89ede000 - 0x89efdfff]
DMAR: Prepare 0-16MiB unity mapping for LPC
DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
DMAR: Intel(R) Virtualization Technology for Directed I/O
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:01.0 to group 1
iommu: Adding device 0000:00:02.0 to group 2
iommu: Adding device 0000:00:08.0 to group 3
iommu: Adding device 0000:00:14.0 to group 4
iommu: Adding device 0000:00:16.0 to group 5
iommu: Adding device 0000:00:17.0 to group 6
iommu: Adding device 0000:00:1b.0 to group 7
iommu: Adding device 0000:00:1b.2 to group 8
iommu: Adding device 0000:00:1b.4 to group 9
iommu: Adding device 0000:00:1c.0 to group 10
iommu: Adding device 0000:00:1c.1 to group 11
iommu: Adding device 0000:00:1c.2 to group 12
iommu: Adding device 0000:00:1c.4 to group 13
iommu: Adding device 0000:00:1d.0 to group 14
iommu: Adding device 0000:00:1f.0 to group 15
iommu: Adding device 0000:00:1f.2 to group 15
iommu: Adding device 0000:00:1f.3 to group 15
iommu: Adding device 0000:00:1f.4 to group 15
iommu: Adding device 0000:00:1f.6 to group 16
iommu: Adding device 0000:01:00.0 to group 1
iommu: Adding device 0000:01:00.1 to group 1
iommu: Adding device 0000:07:00.0 to group 17
iommu: Adding device 0000:08:00.0 to group 18
iommu: Adding device 0000:09:00.0 to group 19
iommu: Adding device 0000:09:01.0 to group 20
iommu: Adding device 0000:09:02.0 to group 21
iommu: Adding device 0000:0c:00.0 to group 21
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3c8a615336c, max_idle_ns: 440795257976 ns
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
pcieport 0000:09:01.0: enabling device (0000 -> 0003)
efifb: probing for efifb
efifb: framebuffer at 0xb0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
microcode: sig=0x906e9, pf=0x2, revision=0x42
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 9:774:962
memory memory13: hash matches
rtc_cmos 00:03: setting system clock to 2017-07-03 01:57:08 UTC (1499047028)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1304K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1692K
Freeing unused kernel memory: 28K
random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
VFIO - User Level meta-driver version: 0.3
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
i8042: PNP: No PS/2 controller found.
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 3.00 loaded.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ahci 0000:00:17.0: version 3.0
xhci_hcd 0000:0c:00.0: xHCI Host Controller
xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 3
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
xhci_hcd 0000:0c:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x00009810
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:0c:00.0: xHCI Host Controller
xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xee24b000 port 0xee24b100 irq 129
ata2: SATA max UDMA/133 abar m2048@0xee24b000 port 0xee24b180 irq 129
ata3: SATA max UDMA/133 abar m2048@0xee24b000 port 0xee24b200 irq 129
ata4: SATA max UDMA/133 abar m2048@0xee24b000 port 0xee24b280 irq 129
ata5: SATA max UDMA/133 abar m2048@0xee24b000 port 0xee24b300 irq 129
ata6: SATA max UDMA/133 abar m2048@0xee24b000 port 0xee24b380 irq 129
usb 1-1: new high-speed USB device number 2 using xhci_hcd
usb 3-2: new full-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-10: WDC WD10EZEX-00WN4A0, 01.01A01, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata3.00: ATA-8: WDC WD5000AAKS-00WWPA0, 01.03B01, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: NCQ Send/Recv Log not supported
ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133
ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: NCQ Send/Recv Log not supported
ata3.00: configured for UDMA/133
ata5: SATA link down (SStatus 4 SControl 300)
ata1.00: configured for UDMA/133
ata6: SATA link down (SStatus 4 SControl 300)
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
ata4: SATA link down (SStatus 4 SControl 300)
scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-00W 1A01 PQ: 0 ANSI: 5
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Genius 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:1c.4/0000:08:00.0/0000:09:02.0/0000:0c:00.0/usb3/3-2/3-2:1.0/0003:0458:0152.0001/input/input0
scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 3B01 PQ: 0 ANSI: 5
hid-generic 0003:0458:0152.0001: input,hidraw0: USB HID v1.11 Mouse [Genius 2.4G Wireless Mouse] on usb-0000:0c:00.0-2/input0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Attached SCSI disk
usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
random: fast init done
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 1-2: new high-speed USB device number 3 using xhci_hcd
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 233 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Created slice System Slice.
EXT4-fs (sda2): re-mounted. Opts: data=ordered
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 8 processor cores
usb 1-3: new full-speed USB device number 4 using xhci_hcd
vboxdrv: TSC mode is Invariant, tentative frequency 4199987640 Hz
vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000)
VBoxPciLinuxInit
vboxpci: IOMMU found
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
systemd-journald[229]: Received request to flush runtime journal from PID 1
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
wmi: Mapper loaded
i8042: PNP: No PS/2 controller found.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
pps_core: LinuxPPS API ver. 1 registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.4: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
i8042: PNP: No PS/2 controller found.
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
alx 0000:07:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [1c:1b:0d:9b:b6:4b]
input: PC Speaker as /devices/platform/pcspkr/input/input4
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
random: crng init done
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 3 ports detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
alx 0000:07:00.0 enp7s0: renamed from eth0
mousedev: PS/2 mouse device common for all mice
raid6: sse2x1 gen() 13899 MB/s
raid6: sse2x1 xor() 11963 MB/s
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
usb 1-4: new low-speed USB device number 5 using xhci_hcd
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
raid6: sse2x2 gen() 19950 MB/s
raid6: sse2x2 xor() 13699 MB/s
input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:045E:0083.0002/input/input5
hid-generic 0003:045E:0083.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:14.0-4/input0
raid6: sse2x4 gen() 20847 MB/s
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
usbcore: registered new interface driver rtl8192cu
rtl8192cu 1-2:1.0 enp0s20f0u2: renamed from wlan0
usb 1-3.1: new full-speed USB device number 6 using xhci_hcd
raid6: sse2x4 xor() 14637 MB/s
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 1c:1b:0d:9b:b6:49
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[drm] Memory usable by graphics device = 4096M
[drm] VT-d active for gfx access
checking generic (b0000000 300000) vs hw (b0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[drm] GuC firmware load skipped
[drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0f: registered as cooling_device13
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
raid6: avx2x1 gen() 31889 MB/s
input: Chicony Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.0/0003:0458:0708.0003/input/input7
raid6: avx2x1 xor() 22985 MB/s
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
hid-generic 0003:0458:0708.0003: input,hidraw2: USB HID v1.10 Keyboard [Chicony Multimedia Keyboard] on usb-0000:00:14.0-3.1/input0
input: Chicony Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.1/1-3.1:1.1/0003:0458:0708.0004/input/input8
raid6: avx2x2 gen() 35752 MB/s
hid-generic 0003:0458:0708.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Chicony Multimedia Keyboard] on usb-0000:00:14.0-3.1/input1
fbcon: inteldrmfb (fb0) is primary device
raid6: avx2x2 xor() 23954 MB/s
snd_hda_codec_ca0132 hdaudioC0D0: autoconfig for CA0132: line_outs=1 (0xb/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_ca0132 hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_ca0132 hdaudioC0D0: hp_outs=1 (0x10/0x0/0x0/0x0/0x0)
snd_hda_codec_ca0132 hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_ca0132 hdaudioC0D0: dig-out=0xc/0x0
snd_hda_codec_ca0132 hdaudioC0D0: inputs:
snd_hda_codec_ca0132 hdaudioC0D0: Mic=0x12
snd_hda_codec_ca0132 hdaudioC0D0: Line=0x11
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
raid6: avx2x4 gen() 41116 MB/s
raid6: avx2x4 xor() 26423 MB/s
raid6: using algorithm avx2x4 gen() 41116 MB/s
raid6: .... xor() 26423 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device fsid aee4023a-2487-4cff-aa7d-42160ac8230a devid 1 transid 2044 /dev/sdc1
BTRFS info (device sdc1): disk space caching is enabled
BTRFS info (device sdc1): has skinny extents
bbswitch: version 0.8
bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
bbswitch: failed to evaluate \_SB_.PCI0.PEG0.PEGP._DSM {0xF8,0xD8,0x86,0xA4,0xDA,0x0B,0x1B,0x47,0xA7,0x2B,0x60,0x42,0xA6,0xB5,0xBE,0xE0} 0x100 0x0 {0x00,0x00,0x00,0x00}: AE_NOT_FOUND
bbswitch: failed to evaluate \_SB_.PCI0.PEG0.PEGP._DSM {0xA0,0xA0,0x95,0x9D,0x60,0x00,0x48,0x4D,0xB3,0x4D,0x7E,0x5F,0xEA,0x12,0x9F,0xD4} 0x102 0x0 {0x00,0x00,0x00,0x00}: AE_NOT_FOUND
ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
bbswitch: No suitable _DSM call found.
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
snd_hda_codec_ca0132 hdaudioC0D0: ca0132 DSP downloaded and running
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u2: link is not ready
input: HDA Intel PCH Front Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u2: link is not ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[drm] RC6 on
snd_hda_codec_ca0132 hdaudioC0D0: ca0132 DSP downloaded and running
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u2: link is not ready
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20f0u2: link becomes ready
vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered listening state
qemu-system-x86: sending ioctl 5326 to a partition!
vfio-pci 0000:01:00.0: enabling device (0000 -> 0003)
vfio_ecap_init: 0000:01:00.0 hiding ecap 0x19@0x900
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
virbr0: port 2(vnet0) entered learning state
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
virbr0: port 2(vnet0) entered forwarding state
virbr0: topology change detected, propagating
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
perf: interrupt took too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 79200
perf: interrupt took too long (3157 > 3146), lowering kernel.perf_event_max_sample_rate to 63300
perf: interrupt took too long (4076 > 3946), lowering kernel.perf_event_max_sample_rate to 48900
perf: interrupt took too long (5119 > 5095), lowering kernel.perf_event_max_sample_rate to 39000
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
virbr0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
virbr0: port 2(vnet0) entered disabled state
input: Genius 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:1c.4/0000:08:00.0/0000:09:02.0/0000:0c:00.0/usb3/3-2/3-2:1.0/0003:0458:0152.0005/input/input21
hid-generic 0003:0458:0152.0005: input,hidraw0: USB HID v1.11 Mouse [Genius 2.4G Wireless Mouse] on usb-0000:0c:00.0-2/input0
vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input25
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia-nvlink: Nvlink Core is being initialized, major device number 240
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 381.22 Thu May 4 00:55:03 PDT 2017 (using threaded interrupts)
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 239
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 381.22 Thu May 4 00:21:48 PDT 2017
nvidia-modeset: Allocated GPU:0 (GPU-d5730afd-b412-8899-d389-68a9e82b9218) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-d5730afd-b412-8899-d389-68a9e82b9218) @ PCI:0000:01:00.0
vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=none,decodes=io+mem:owns=none
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered listening state
qemu-system-x86: sending ioctl 5326 to a partition!
virbr0: port 2(vnet0) entered learning state
vfio_ecap_init: 0000:01:00.0 hiding ecap 0x19@0x900
virbr0: port 2(vnet0) entered forwarding state
virbr0: topology change detected, propagating
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
rtw_wx_set_mlme
rtw_wx_set_mlme, cmd=0, reason=3
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u2: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20f0u2: link becomes ready
systemd: 41 output lines suppressed due to ratelimiting
rtw_wx_set_mlme
rtw_wx_set_mlme, cmd=0, reason=3
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u2: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20f0u2: link becomes ready
rtw_wx_set_mlme
rtw_wx_set_mlme, cmd=0, reason=3
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u2: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20f0u2: link becomes ready
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
virbr0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
virbr0: port 2(vnet0) entered disabled state
input: Genius 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:1c.4/0000:08:00.0/0000:09:02.0/0000:0c:00.0/usb3/3-2/3-2:1.0/0003:0458:0152.0006/input/input26
hid-generic 0003:0458:0152.0006: input,hidraw0: USB HID v1.11 Mouse [Genius 2.4G Wireless Mouse] on usb-0000:0c:00.0-2/input0
vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input27
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input28
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input29
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input30
vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=none,decodes=io+mem:owns=none
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered listening state
qemu-system-x86: sending ioctl 5326 to a partition!
vfio_ecap_init: 0000:01:00.0 hiding ecap 0x19@0x900
virbr0: port 2(vnet0) entered learning state
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
virbr0: port 2(vnet0) entered forwarding state
virbr0: topology change detected, propagating
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
rtw_wx_set_mlme
rtw_wx_set_mlme, cmd=0, reason=3
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u2: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20f0u2: link becomes ready
------------[ cut here ]------------
WARNING: CPU: 5 PID: 14500 at arch/x86/kvm/lapic.c:1529 kvm_lapic_expired_hv_timer+0xd2/0xf0 [kvm]
Modules linked in: nvidia_modeset(PO) nvidia_uvm(PO) nvidia(PO) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c crc32c_generic ipt_REJECT nf_reject_ipv4 xt_tcpudp tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter cfg80211 snd_hda_codec_hdmi btrfs intel_rapl x86_pkg_temp_thermal intel_powerclamp xor snd_hda_codec_ca0132 coretemp input_leds led_class kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd 8192cu(O) intel_cstate joydev mousedev iTCO_wdt iTCO_vendor_support evdev mac_hid mxm_wmi i915 intel_rapl_perf drm_kms_helper snd_hda_intel pcspkr nls_iso8859_1
drm snd_hda_codec snd_hda_core e1000e alx snd_hwdep nls_cp437 intel_gtt snd_pcm mdio hci_uart syscopyarea snd_timer sysfillrect mei_me sysimgblt vfat ptp btbcm snd btqca raid6_pq pps_core fat i2c_i801 fb_sys_fops soundcore btintel i2c_algo_bit mei shpchp bluetooth video rfkill wmi battery i2c_hid intel_lpss_acpi intel_lpss acpi_als tpm_infineon kfifo_buf acpi_pad tpm_tis thermal tpm_tis_core industrialio tpm fan button sch_fq_codel vboxnetflt(O) vboxnetadp(O) pci_stub vboxpci(O) vboxdrv(O) ip_tables x_tables ext4 crc16 jbd2 fscrypto mbcache sd_mod hid_generic usbhid hid ahci xhci_pci libahci xhci_hcd libata usbcore scsi_mod usb_common serio vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio
CPU: 5 PID: 14500 Comm: CPU 0/KVM Tainted: P O 4.11.7-1-ARCH #1
Hardware name: Gigabyte Technology Co., Ltd. Z270X-Gaming 7/Z270X-Gaming 7, BIOS F4 02/10/2017
Call Trace:
dump_stack+0x63/0x81
__warn+0xcb/0xf0
warn_slowpath_null+0x1d/0x20
kvm_lapic_expired_hv_timer+0xd2/0xf0 [kvm]
handle_preemption_timer+0xe/0x20 [kvm_intel]
vmx_handle_exit+0xba/0x1460 [kvm_intel]
? atomic_switch_perf_msrs+0x6f/0xa0 [kvm_intel]
? vmx_vcpu_run+0x322/0x430 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xca5/0x16a0 [kvm]
? kvm_arch_vcpu_load+0x6d/0x290 [kvm]
? __vmx_load_host_state.part.30+0x128/0x210 [kvm_intel]
kvm_vcpu_ioctl+0x2a6/0x640 [kvm]
? kvm_vcpu_ioctl+0x2a6/0x640 [kvm]
? vfio_pci_rw+0x37/0x90 [vfio_pci]
? vfio_pci_read+0x19/0x20 [vfio_pci]
? vfio_device_fops_read+0x24/0x30 [vfio]
? __vfs_read+0x37/0x130
do_vfs_ioctl+0xa5/0x600
? __fget+0x77/0xb0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x1a/0xa9
RIP: 0033:0x7f04d95cec47
RSP: 002b:00007f04cb91b168 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000000000000ae80 RCX: 00007f04d95cec47
RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000014
RBP: 00007f04ce3a8d80 R08: 000055ac30f1f6d0 R09: 00000000000000ff
R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f04e083f000 R14: 0000000000000000 R15: 00007f04ce3a8d80
---[ end trace 157c6b9629e7a5dd ]---
rtw_wx_set_mlme
rtw_wx_set_mlme, cmd=0, reason=3
IPv6: ADDRCONF(NETDEV_UP): enp0s20f0u2: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20f0u2: link becomes ready
usb 1-1.2: new full-speed USB device number 7 using xhci_hcd
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.3/0003:046D:0A44.0007/input/input31
hid-generic 0003:046D:0A44.0007: input,hidraw0: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:14.0-1.2/input3
usbcore: registered new interface driver snd-usb-audio
loop: module loaded
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
NET: Registered protocol family 38
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.2: USB disconnect, device number 7
usb 3-2: reset full-speed USB device number 2 using xhci_hcd
virbr0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
virbr0: port 2(vnet0) entered disabled state
input: Genius 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:1c.4/0000:08:00.0/0000:09:02.0/0000:0c:00.0/usb3/3-2/3-2:1.0/0003:0458:0152.0008/input/input32
hid-generic 0003:0458:0152.0008: input,hidraw0: USB HID v1.11 Mouse [Genius 2.4G Wireless Mouse] on usb-0000:0c:00.0-2/input0
vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=none
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input33
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input34
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input35
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input36
nvidia-modeset: Allocated GPU:0 (GPU-d5730afd-b412-8899-d389-68a9e82b9218) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-d5730afd-b412-8899-d389-68a9e82b9218) @ PCI:0000:01:00.0