dmesg - XPS15
microcode: microcode updated early to revision 0xba, date = 2017-04-09
Linux version 4.11.7-1-default (geeko@buildhost) (gcc version 7.1.1 20170530 [gcc-7-branch revision 248621] (SUSE Linux) ) #1 SMP PREEMPT Sat Jun 24 07:54:41 UTC 2017 (ddd09a5)
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000005efff] usable
BIOS-e820: [mem 0x000000000005f000-0x000000000005ffff] reserved
BIOS-e820: [mem 0x0000000000060000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000320a2fff] usable
BIOS-e820: [mem 0x00000000320a3000-0x00000000320a3fff] ACPI NVS
BIOS-e820: [mem 0x00000000320a4000-0x00000000320edfff] reserved
BIOS-e820: [mem 0x00000000320ee000-0x0000000032144fff] usable
BIOS-e820: [mem 0x0000000032145000-0x0000000032935fff] reserved
BIOS-e820: [mem 0x0000000032936000-0x00000000367f9fff] usable
BIOS-e820: [mem 0x00000000367fa000-0x0000000036ba2fff] reserved
BIOS-e820: [mem 0x0000000036ba3000-0x0000000036be0fff] ACPI data
BIOS-e820: [mem 0x0000000036be1000-0x00000000373c4fff] ACPI NVS
BIOS-e820: [mem 0x00000000373c5000-0x000000003a4fefff] reserved
BIOS-e820: [mem 0x000000003a4ff000-0x000000003a4fffff] usable
BIOS-e820: [mem 0x000000003a500000-0x000000003fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000008bdffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x23535018-0x2354e657] usable ==> usable
e820: update [mem 0x23524018-0x23534057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000005efff] usable
reserve setup_data: [mem 0x000000000005f000-0x000000000005ffff] reserved
reserve setup_data: [mem 0x0000000000060000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000023524017] usable
reserve setup_data: [mem 0x0000000023524018-0x0000000023534057] usable
reserve setup_data: [mem 0x0000000023534058-0x0000000023535017] usable
reserve setup_data: [mem 0x0000000023535018-0x000000002354e657] usable
reserve setup_data: [mem 0x000000002354e658-0x00000000320a2fff] usable
reserve setup_data: [mem 0x00000000320a3000-0x00000000320a3fff] ACPI NVS
reserve setup_data: [mem 0x00000000320a4000-0x00000000320edfff] reserved
reserve setup_data: [mem 0x00000000320ee000-0x0000000032144fff] usable
reserve setup_data: [mem 0x0000000032145000-0x0000000032935fff] reserved
reserve setup_data: [mem 0x0000000032936000-0x00000000367f9fff] usable
reserve setup_data: [mem 0x00000000367fa000-0x0000000036ba2fff] reserved
reserve setup_data: [mem 0x0000000036ba3000-0x0000000036be0fff] ACPI data
reserve setup_data: [mem 0x0000000036be1000-0x00000000373c4fff] ACPI NVS
reserve setup_data: [mem 0x00000000373c5000-0x000000003a4fefff] reserved
reserve setup_data: [mem 0x000000003a4ff000-0x000000003a4fffff] usable
reserve setup_data: [mem 0x000000003a500000-0x000000003fffffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000008bdffffff] usable
efi: EFI v2.40 by American Megatrends
efi: ACPI=0x36baf000 ACPI 2.0=0x36baf000 SMBIOS=0xf05e0 MPS=0xfccd0
SMBIOS 2.8 present.
DMI: Dell Inc. XPS 15 9550/0N7TVV, BIOS 1.2.25 05/07/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x8be000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 0040000000 mask 7FC0000000 uncachable
2 base 003C000000 mask 7FFC000000 uncachable
3 base 003B800000 mask 7FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x3a500 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcfe0-0x000fcfef] mapped at [ffff99ed000fcfe0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff99ed00096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x89e269000, 0x89e269fff] PGTABLE
BRK [0x89e26a000, 0x89e26afff] PGTABLE
BRK [0x89e26b000, 0x89e26bfff] PGTABLE
BRK [0x89e26c000, 0x89e26cfff] PGTABLE
BRK [0x89e26d000, 0x89e26dfff] PGTABLE
BRK [0x89e26e000, 0x89e26efff] PGTABLE
BRK [0x89e26f000, 0x89e26ffff] PGTABLE
BRK [0x89e270000, 0x89e270fff] PGTABLE
BRK [0x89e271000, 0x89e271fff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x2354f000-0x2421ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000036BAF000 000024 (v02 DELL )
ACPI: XSDT 0x0000000036BAF0C0 000104 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x0000000036BCFFE8 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x0000000036BAF258 020D8C (v02 DELL CBX3 01072009 INTL 20120913)
ACPI: FACS 0x00000000373C3D80 000040
ACPI: APIC 0x0000000036BD00F8 0000BC (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x0000000036BD01B8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x0000000036BD0200 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: HPET 0x0000000036BD0240 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
ACPI: SSDT 0x0000000036BD0278 00046D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: WSMT 0x0000000036BD06E8 000028 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: LPIT 0x0000000036BD0710 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000036BD07A8 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0x0000000036BD09F0 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
ACPI: SSDT 0x0000000036BD35A0 000024 (v02 INTEL OEM_RTD3 00001000 INTL 20120913)
ACPI: SSDT 0x0000000036BD35C8 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
ACPI: SSDT 0x0000000036BD41B0 0004DC (v02 INTEL zpodd 00001000 INTL 20120913)
ACPI: DBGP 0x0000000036BD4690 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x0000000036BD46C8 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000036BD4720 000775 (v02 INTEL xh_rvp10 00000000 INTL 20120913)
ACPI: BOOT 0x0000000036BD4E98 000028 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: SSDT 0x0000000036BD4EC0 0037D6 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x0000000036BD8698 000042 (v01 00000000 00000000)
ACPI: SSDT 0x0000000036BD86E0 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: MSDM 0x0000000036BD9558 000055 (v03 DELL CBX3 06222004 AMI 00010013)
ACPI: SSDT 0x0000000036BD95B0 0044FA (v02 DptfTa DptfTabl 00001000 INTL 20120913)
ACPI: SLIC 0x0000000036BDDAB0 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: SSDT 0x0000000036BDDC28 0000C3 (v02 SgRef SgPeg 00001000 INTL 20120913)
ACPI: DMAR 0x0000000036BDDCF0 0000F0 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: SSDT 0x0000000036BDDDE0 001868 (v01 OptRef OptTabl 00001000 INTL 20120913)
ACPI: ASF! 0x0000000036BDF648 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: BGRT 0x0000000036BDF6F0 000038 (v00 \xfffffff3\xffffffee 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000008bdffffff]
NODE_DATA(0) allocated [mem 0x8bdfea000-0x8bdffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000008bdffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000005efff]
node 0: [mem 0x0000000000060000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000320a2fff]
node 0: [mem 0x00000000320ee000-0x0000000032144fff]
node 0: [mem 0x0000000032936000-0x00000000367f9fff]
node 0: [mem 0x000000003a4ff000-0x000000003a4fffff]
node 0: [mem 0x0000000100000000-0x00000008bdffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000008bdffffff]
On node 0 totalpages: 8339291
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 3391 pages used for memmap
DMA32 zone: 217023 pages, LIFO batch:31
Normal zone: 126848 pages used for memmap
Normal zone: 8118272 pages, LIFO batch:31
Reserving Intel graphics memory at 0x000000003c000000-0x000000003fffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0005f000-0x0005ffff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x23524000-0x23524fff]
PM: Registered nosave memory: [mem 0x23534000-0x23534fff]
PM: Registered nosave memory: [mem 0x23535000-0x23535fff]
PM: Registered nosave memory: [mem 0x2354e000-0x2354efff]
PM: Registered nosave memory: [mem 0x320a3000-0x320a3fff]
PM: Registered nosave memory: [mem 0x320a4000-0x320edfff]
PM: Registered nosave memory: [mem 0x32145000-0x32935fff]
PM: Registered nosave memory: [mem 0x367fa000-0x36ba2fff]
PM: Registered nosave memory: [mem 0x36ba3000-0x36be0fff]
PM: Registered nosave memory: [mem 0x36be1000-0x373c4fff]
PM: Registered nosave memory: [mem 0x373c5000-0x3a4fefff]
PM: Registered nosave memory: [mem 0x3a500000-0x3fffffff]
PM: Registered nosave memory: [mem 0x40000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x40000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 38 pages/cpu @ffff99f5bdc00000 s117464 r8192 d29992 u262144
pcpu-alloc: s117464 r8192 d29992 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8208964
Policy zone: Normal
log_buf_len individual max cpu contribution: 32768 bytes
log_buf_len total cpu_extra contributions: 229376 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 524288 bytes
early log buf free: 244884(93%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 3074112K/33357164K available (7449K kernel code, 1307K rwdata, 5256K rodata, 1828K init, 1340K bss, 714724K reserved, 0K cma-reserved)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:2048 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 2600.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5184.00 BogoMIPS (lpj=10368000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170119
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170119/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170119/psobject-227)
ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp10) while loading table (20170119/tbxfload-228)
ACPI Error: 1 table load failures, 12 successful (20170119/tbxfload-246)
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 28K
ftrace: allocating 29398 entries in 115 pages
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000003690d000 end: 0x0000003692cfff
DMAR: RMRR base: 0x0000003b800000 end: 0x0000003fffffff
DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (41479.25 BogoMIPS)
sched_clock: Marking stable (948000000, 0)->(954481830, -6481830)
node 0 initialised, 7392082 pages in 96ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x320a3000-0x320a3fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x36be1000-0x373c4fff] (8273920 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 13:37:49, date: 07/01/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x47 set to 0x80
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 22 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF99EE8FCC0000 0005DC (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF99EE8C1D2000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF99EE8FCC0800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF99EE8FCCF000 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x70000000-0x7fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xddc20000-0xddc27fff 64bit]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xddc10000-0xddc1ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xddc38000-0xddc38fff 64bit]
pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xddc37000-0xddc37fff 64bit]
pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0xddc36000-0xddc36fff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xddc35000-0xddc35fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xddc30000-0xddc31fff]
pci 0000:00:17.0: reg 0x14: [mem 0xddc34000-0xddc340ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xddc33000-0xddc337ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:a111] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.4: [8086:a11c] type 01 class 0x060400
pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.4: System wakeup disabled by ACPI
pci 0000:00:1d.6: [8086:a11e] type 01 class 0x060400
pci 0000:00:1d.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.6: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xddc2c000-0xddc2ffff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040380
pci 0000:00:1f.3: reg 0x10: [mem 0xddc28000-0xddc2bfff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xddc00000-0xddc0ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xddc32000-0xddc320ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10de:139b] type 00 class 0x030200
pci 0000:01:00.0: reg 0x10: [mem 0xdc000000-0xdcffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdd000000-0xdd07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdd0fffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xddb00000-0xddb01fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xddb00000-0xddbfffff]
pci 0000:03:00.0: [10ec:525a] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x14: [mem 0xdd100000-0xdd100fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xdd100000-0xddafffff]
pci 0000:00:1c.1: bridge window [mem 0xc2100000-0xc2afffff 64bit pref]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.4: PCI bridge to [bus 05]
pci 0000:00:1d.6: PCI bridge to [bus 06-3e]
pci 0000:00:1d.6: bridge window [mem 0xc4000000-0xda0fffff]
pci 0000:00:1d.6: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0005f000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x23524018-0x23ffffff]
e820: reserve RAM buffer [mem 0x23535018-0x23ffffff]
e820: reserve RAM buffer [mem 0x320a3000-0x33ffffff]
e820: reserve RAM buffer [mem 0x32145000-0x33ffffff]
e820: reserve RAM buffer [mem 0x367fa000-0x37ffffff]
e820: reserve RAM buffer [mem 0x3a500000-0x3bffffff]
e820: reserve RAM buffer [mem 0x8be000000-0x8bfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs DLL06e4 PNP0f13 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xff00-0xfffe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1d.6: bridge window [io 0x1000-0x0fff] to [bus 06-3e] add_size 1000
pci 0000:00:1d.6: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdc000000-0xdd0fffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [mem 0xddb00000-0xddbfffff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xdd100000-0xddafffff]
pci 0000:00:1c.1: bridge window [mem 0xc2100000-0xc2afffff 64bit pref]
pci 0000:00:1d.0: PCI bridge to [bus 04]
pci 0000:00:1d.4: PCI bridge to [bus 05]
pci 0000:00:1d.6: PCI bridge to [bus 06-3e]
pci 0000:00:1d.6: bridge window [io 0x2000-0x2fff]
pci 0000:00:1d.6: bridge window [mem 0xc4000000-0xda0fffff]
pci 0000:00:1d.6: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x40000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdc000000-0xdd0fffff]
pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xddb00000-0xddbfffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xdd100000-0xddafffff]
pci_bus 0000:03: resource 2 [mem 0xc2100000-0xc2afffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:06: resource 1 [mem 0xc4000000-0xda0fffff]
pci_bus 0000:06: resource 2 [mem 0x80000000-0xa1ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 13124K
DMAR: ACPI device "device:68" under DMAR at fed91000 as 00:15.0
DMAR: ACPI device "device:69" under DMAR at fed91000 as 00:15.1
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x2c5fb000-0x305fb000] (64MB) mapped at [ffff99ed2c5fb000-ffff99ed305fafff]
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1498916270.548:1): state=initialized audit_enabled=0 res=1
workingset: timestamp_bits=37 max_order=23 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
efifb: probing for efifb
efifb: framebuffer at 0x70000000, using 32400k, total 32400k
efifb: mode is 3840x2160x32, linelength=15360, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 480x135
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm led clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0xddc33000 port 0xddc33100 irq 123
ata2: SATA max UDMA/133 abar m2048@0xddc33000 port 0xddc33180 irq 123
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
hidraw: raw HID events driver (C) Jiri Kosina
NET: Registered protocol family 10
Segment Routing with IPv6
microcode: sig=0x506e3, pf=0x20, revision=0xba
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 9:40:634
platform INT3403:01: hash matches
acpi INT3403:01: hash matches
rtc_cmos 00:02: setting system clock to 2017-07-01 13:37:51 UTC (1498916271)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: SanDisk SD8SN8U1T001122, X4120000, max UDMA/133
ata1.00: 2000409264 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SanDisk SD8SN8U1 0000 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 4 SControl 300)
clocksource: Switched to clocksource tsc
psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4646]
psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1206..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x12e800/0x0, board id: 3125, fw id: 1961136
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1828K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 728K
Freeing unused kernel memory: 888K
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 233 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Swap.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Timers.
sd 0:0:0:0: Attached scsi generic sg0 type 0
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
wmi: Mapper loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 124
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.11.7-1-default xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
MXM: GUID detected in BIOS
ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
nouveau: detected PR support, will not use DSM
nouveau 0000:01:00.0: enabling device (0006 -> 0007)
checking generic (70000000 1fa4000) vs hw (b0000000 10000000)
checking generic (70000000 1fa4000) vs hw (c0000000 2000000)
nouveau 0000:01:00.0: NVIDIA GM107 (1171b0a2)
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.11.7-1-default xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
PM: Starting manual resume from disk
PM: Hibernation image partition 8:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
nouveau 0000:01:00.0: bios: version 82.07.82.00.2a
raid6: sse2x1 gen() 9010 MB/s
[drm] Memory usable by graphics device = 4096M
checking generic (70000000 1fa4000) vs hw (70000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[drm] GuC firmware load skipped
random: crng init done
raid6: sse2x1 xor() 7851 MB/s
nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 10ac08 [ IBUS ]
nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1c40822c)
raid6: sse2x2 gen() 14589 MB/s
raid6: sse2x2 xor() 9948 MB/s
usb 1-4: new full-speed USB device number 2 using xhci_hcd
raid6: sse2x4 gen() 17083 MB/s
raid6: sse2x4 xor() 10461 MB/s
usb 1-4: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
raid6: avx2x1 gen() 23735 MB/s
raid6: avx2x1 xor() 16654 MB/s
usb 1-9: new full-speed USB device number 3 using xhci_hcd
raid6: avx2x2 gen() 29014 MB/s
raid6: avx2x2 xor() 18445 MB/s
usb 1-9: New USB device found, idVendor=04f3, idProduct=21d5
usb 1-9: New USB device strings: Mfr=4, Product=14, SerialNumber=0
usb 1-9: Product: Touchscreen
usb 1-9: Manufacturer: ELAN
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:04F3:21D5.0001/input/input7
hid-multitouch 0003:04F3:21D5.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-9/input0
raid6: avx2x4 gen() 32647 MB/s
raid6: avx2x4 xor() 20098 MB/s
raid6: using algorithm avx2x4 gen() 32647 MB/s
raid6: .... xor() 20098 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel, assert=on
BTRFS: device fsid 61ccebd1-e64a-4fed-b291-d671f91535f3 devid 1 transid 786 /dev/sda3
usb 1-12: new high-speed USB device number 4 using xhci_hcd
BTRFS info (device sda3): disk space caching is enabled
BTRFS info (device sda3): has skinny extents
BTRFS info (device sda3): detected SSD devices, enabling SSD mode
usb 1-12: New USB device found, idVendor=0c45, idProduct=6713
usb 1-12: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-12: Product: Integrated_Webcam_HD
usb 1-12: Manufacturer: CN045G28724875B3B31PA01
vga_switcheroo: enabled
[TTM] Zone kernel: Available graphics memory: 16373610 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
nouveau 0000:01:00.0: DRM: DCB version 4.0
nouveau 0000:01:00.0: DRM: Pointer to flat panel table invalid
nouveau 0000:01:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 1
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input12
fbcon: inteldrmfb (fb0) is primary device
[drm] RC6 on
Console: switching to colour frame buffer device 480x135
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
systemd-journald[183]: Received SIGTERM from PID 1 (systemd).
systemd: 19 output lines suppressed due to ratelimiting
BTRFS info (device sda3): disk space caching is enabled
audit: type=1400 audit(1498916276.037:2): apparmor="STATUS" operation="profile_load" name="ping" pid=407 comm="apparmor_parser"
audit: type=1400 audit(1498916276.045:3): apparmor="STATUS" operation="profile_load" name="klogd" pid=416 comm="apparmor_parser"
audit: type=1400 audit(1498916276.053:4): apparmor="STATUS" operation="profile_load" name="syslog-ng" pid=422 comm="apparmor_parser"
audit: type=1400 audit(1498916276.057:5): apparmor="STATUS" operation="profile_load" name="syslogd" pid=427 comm="apparmor_parser"
audit: type=1400 audit(1498916276.065:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/lessopen.sh" pid=433 comm="apparmor_parser"
audit: type=1400 audit(1498916276.073:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=448 comm="apparmor_parser"
audit: type=1400 audit(1498916276.073:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=448 comm="apparmor_parser"
audit: type=1400 audit(1498916276.073:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=448 comm="apparmor_parser"
audit: type=1400 audit(1498916276.073:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=448 comm="apparmor_parser"
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.CHRG] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\PNOT] (Node ffff99ee8fceea00), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: Method parse/execution failed [\_SB.AC._PSR] (Node ffff99ee8fd00190), AE_NOT_FOUND (20170119/psparse-543)
ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20170119/ac-128)
ACPI Warning: \_SB.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20170119/nspredef-297)
ACPI: Invalid package element [0]: got number, expecting [R]
_ART package 0 is invalid, ignored
ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20170119/nsprepkg-130)
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff99ee8fd35a28), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff99ee8fd350a0), AE_NOT_FOUND (20170119/psparse-543)
acpi PNP0C0B:00: Failed to change power state to D0
thermal LNXTHERM:00: registered as thermal_zone2
ACPI: Thermal Zone [THM] (25 C)
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff99ee8fd35a28), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff99ee8fd350a0), AE_NOT_FOUND (20170119/psparse-543)
acpi PNP0C0B:00: Failed to set initial power state
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff99ee8fd37e60), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff99ee8fd37e60), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff99ee8fd37c08), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff99ee8fd37c08), AE_NOT_FOUND (20170119/psparse-543)
ACPI: Battery Slot [BAT0] (battery present)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
acpi PNP0C0B:00: Cannot transition from (unknown) to D3hot
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff99ee8fd35a28), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: Method parse/execution failed [\_TZ.FN01._ON] (Node ffff99ee8fd35460), AE_NOT_FOUND (20170119/psparse-543)
acpi PNP0C0B:01: Failed to change power state to D0
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff99ee8fd35a28), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: Method parse/execution failed [\_TZ.FN01._ON] (Node ffff99ee8fd35460), AE_NOT_FOUND (20170119/psparse-543)
acpi PNP0C0B:01: Failed to set initial power state
acpi PNP0C0B:01: Cannot transition from (unknown) to D3hot
acpi INT33D5:00: intel-hid: created platform device
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
idma64 idma64.0: Found Intel integrated DMA 64-bit
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-28.ucode failed with error -2
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff99ee8fd35a28), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: Method parse/execution failed [\_TZ.FN02._ON] (Node ffff99ee8fd35960), AE_NOT_FOUND (20170119/psparse-543)
acpi PNP0C0B:02: Failed to change power state to D0
iwlwifi 0000:02:00.0: capa flags index 3 larger than supported by driver
iwlwifi 0000:02:00.0: loaded firmware version 27.455470.0 op_mode iwlmvm
dell_wmi: Detected Dell WMI interface version 1
input: Dell WMI hotkeys as /devices/virtual/input/input13
proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff99ee8fd35a28), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: Method parse/execution failed [\_TZ.FN02._ON] (Node ffff99ee8fd35960), AE_NOT_FOUND (20170119/psparse-543)
acpi PNP0C0B:02: Failed to set initial power state
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
acpi PNP0C0B:02: Cannot transition from (unknown) to D3hot
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
Adding 33550332k swap on /dev/sda1. Priority:-1 extents:1 across:33550332k SSFS
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff99ee8fd35a28), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: Method parse/execution failed [\_TZ.FN03._ON] (Node ffff99ee8fd357f8), AE_NOT_FOUND (20170119/psparse-543)
acpi PNP0C0B:03: Failed to change power state to D0
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff99ee8fd35a28), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: Method parse/execution failed [\_TZ.FN03._ON] (Node ffff99ee8fd357f8), AE_NOT_FOUND (20170119/psparse-543)
acpi PNP0C0B:03: Failed to set initial power state
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
acpi PNP0C0B:03: Cannot transition from (unknown) to D3hot
input: Intel HID events as /devices/platform/INT33D5:00/input/input14
input: PC Speaker as /devices/platform/pcspkr/input/input15
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff99ee8fd35a28), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: Method parse/execution failed [\_TZ.FN04._ON] (Node ffff99ee8fd35820), AE_NOT_FOUND (20170119/psparse-543)
acpi PNP0C0B:04: Failed to change power state to D0
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff99ee8fd35a28), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: Method parse/execution failed [\_TZ.FN04._ON] (Node ffff99ee8fd35820), AE_NOT_FOUND (20170119/psparse-543)
acpi PNP0C0B:04: Failed to set initial power state
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal thermal_zone11: failed to read out thermal zone (-5)
iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
acpi PNP0C0B:04: Cannot transition from (unknown) to D3hot
input: DLL06E4:01 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-20/i2c-DLL06E4:01/0018:06CB:7A13.0002/input/input18
hid-multitouch 0018:06CB:7A13.0002: input,hidraw1: I2C HID v1.00 Mouse [DLL06E4:01 06CB:7A13] on i2c-DLL06E4:01
systemd-journald[376]: Received request to flush runtime journal from PID 1
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
Linux video capture interface: v2.00
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
NET: Registered protocol family 17
uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6713)
input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input28
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
do_trap: 36 callbacks suppressed
traps: gnome-shell[1576] trap int3 ip:7f5d689894f1 sp:7fffa34177e0 error:0
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with e0:51:63:26:1c:fd
wlp2s0: send auth to e0:51:63:26:1c:fd (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e0:51:63:26:1c:fd (try 1/3)
wlp2s0: RX AssocResp from e0:51:63:26:1c:fd (capab=0x1031 status=0 aid=4)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e0:51:63:26:1c:fd
SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC=34:02:86:69:c8:69:34:02:86:69:c8:69:86:dd SRC=fe80:0000:0000:0000:e69f:1f72:0de2:0731 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=186 TC=0 HOPLIMIT=255 FLOWLBL=813272 PROTO=UDP SPT=5353 DPT=5353 LEN=146
SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC=34:02:86:69:c8:69:34:02:86:69:c8:69:86:dd SRC=fe80:0000:0000:0000:e69f:1f72:0de2:0731 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=322 TC=0 HOPLIMIT=255 FLOWLBL=813272 PROTO=UDP SPT=5353 DPT=5353 LEN=282
SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC=34:02:86:69:c8:69:34:02:86:69:c8:69:86:dd SRC=fe80:0000:0000:0000:e69f:1f72:0de2:0731 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=87 TC=0 HOPLIMIT=255 FLOWLBL=813272 PROTO=UDP SPT=5353 DPT=5353 LEN=47
SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC=34:02:86:69:c8:69:34:02:86:69:c8:69:86:dd SRC=fe80:0000:0000:0000:e69f:1f72:0de2:0731 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=322 TC=0 HOPLIMIT=255 FLOWLBL=813272 PROTO=UDP SPT=5353 DPT=5353 LEN=282
SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC=34:02:86:69:c8:69:34:02:86:69:c8:69:86:dd SRC=fe80:0000:0000:0000:e69f:1f72:0de2:0731 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=322 TC=0 HOPLIMIT=255 FLOWLBL=813272 PROTO=UDP SPT=5353 DPT=5353 LEN=282
nouveau 0000:01:00.0: DRM: evicting buffers...
nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
nouveau 0000:01:00.0: DRM: suspending fence...
nouveau 0000:01:00.0: DRM: suspending object tree...
nouveau 0000:01:00.0: DRM: resuming object tree...
nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1b40822c)
nouveau 0000:01:00.0: DRM: resuming fence...
fuse init (API version 7.26)
SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC=34:02:86:69:c8:69:90:4d:4a:07:f2:77:08:00 SRC=192.168.1.254 DST=192.168.1.65 LEN=525 TOS=0x00 PREC=0x00 TTL=64 ID=0 PROTO=UDP SPT=33357 DPT=45194 LEN=505
nouveau 0000:01:00.0: DRM: evicting buffers...
nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
nouveau 0000:01:00.0: DRM: suspending fence...
nouveau 0000:01:00.0: DRM: suspending object tree...
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC=34:02:86:69:c8:69:34:02:86:69:c8:69:86:dd SRC=fdaa:bbcc:ddee:0000:a8da:2283:1156:0ca9 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=87 TC=0 HOPLIMIT=255 FLOWLBL=254261 PROTO=UDP SPT=5353 DPT=5353 LEN=47
SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC=34:02:86:69:c8:69:34:02:86:69:c8:69:86:dd SRC=fdaa:bbcc:ddee:0000:a8da:2283:1156:0ca9 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=87 TC=0 HOPLIMIT=255 FLOWLBL=254261 PROTO=UDP SPT=5353 DPT=5353 LEN=47
SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC=34:02:86:69:c8:69:34:02:86:69:c8:69:86:dd SRC=fdaa:bbcc:ddee:0000:a8da:2283:1156:0ca9 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=87 TC=0 HOPLIMIT=255 FLOWLBL=254261 PROTO=UDP SPT=5353 DPT=5353 LEN=47
SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC=34:02:86:69:c8:69:34:02:86:69:c8:69:86:dd SRC=fdaa:bbcc:ddee:0000:a8da:2283:1156:0ca9 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=87 TC=0 HOPLIMIT=255 FLOWLBL=254261 PROTO=UDP SPT=5353 DPT=5353 LEN=47
SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC=34:02:86:69:c8:69:60:57:18:01:1d:64:86:dd SRC=2a00:23c5:69a9:7500:199b:169d:fece:8c68 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=87 TC=0 HOPLIMIT=255 FLOWLBL=593464 PROTO=UDP SPT=5353 DPT=5353 LEN=47
SFW2-INext-DROP-DEFLT IN=wlp2s0 OUT= MAC=34:02:86:69:c8:69:34:02:86:69:c8:69:86:dd SRC=fdaa:bbcc:ddee:0000:a8da:2283:1156:0ca9 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=87 TC=0 HOPLIMIT=255 FLOWLBL=254261 PROTO=UDP SPT=5353 DPT=5353 LEN=47
dell_wmi: Unknown WMI event type 0x12
nouveau 0000:01:00.0: DRM: resuming object tree...
nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1c40822c)
nouveau 0000:01:00.0: DRM: resuming fence...
nouveau 0000:01:00.0: DRM: evicting buffers...
nouveau 0000:01:00.0: DRM: waiting for kernel channels to go idle...
nouveau 0000:01:00.0: DRM: suspending fence...
nouveau 0000:01:00.0: DRM: suspending object tree...