dmesg - phpbench
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-81-generic (buildd@lgw01-02) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #104-Ubuntu SMP Wed Jun 14 08:17:06 UTC 2017 (Ubuntu 4.4.0-81.104-generic 4.4.67)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
BIOS-e820: [mem 0x000000001f000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000006aea1fff] usable
BIOS-e820: [mem 0x000000006aea2000-0x000000006af1cfff] reserved
BIOS-e820: [mem 0x000000006af1d000-0x000000006b043fff] usable
BIOS-e820: [mem 0x000000006b044000-0x000000006b4aafff] ACPI NVS
BIOS-e820: [mem 0x000000006b4ab000-0x000000006b7d2fff] reserved
BIOS-e820: [mem 0x000000006b7d3000-0x000000006b836fff] type 20
BIOS-e820: [mem 0x000000006b837000-0x000000006bffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ESRT=0x6b7cf218 ACPI=0x6b412000 ACPI 2.0=0x6b412000 SMBIOS=0xf05e0 MPS=0xfc900
esrt: Reserving ESRT space from 0x000000006b7cf218 to 0x000000006b7cf250.
SMBIOS 2.8 present.
DMI: MSI MS-7890/N3150I ECO (MS-7890), BIOS 1.20 03/09/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 040000000 mask FE0000000 write-back
2 base 060000000 mask FF0000000 write-back
3 base 06E800000 mask FFF800000 uncachable
4 base 06F000000 mask FFF000000 uncachable
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask F80000000 write-back
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1GB, range: 512MB, type WB
reg 2, base: 1536MB, range: 256MB, type WB
reg 3, base: 1768MB, range: 8MB, type UC
reg 4, base: 1776MB, range: 16MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 2GB, type WB
total RAM covered: 7912M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 512M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 1768MB, range: 8MB, type UC
reg 2, base: 1776MB, range: 16MB, type UC
reg 3, base: 1792MB, range: 256MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 2GB, type WB
e820: update [mem 0x6e800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x6c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcae0-0x000fcaef] mapped at [ffff8800000fcae0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
BRK [0x0320b000, 0x0320bfff] PGTABLE
BRK [0x0320c000, 0x0320cfff] PGTABLE
BRK [0x0320d000, 0x0320dfff] PGTABLE
BRK [0x0320e000, 0x0320efff] PGTABLE
BRK [0x0320f000, 0x0320ffff] PGTABLE
BRK [0x03210000, 0x03210fff] PGTABLE
RAMDISK: [mem 0x336f4000-0x35b71fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000006B412000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000006B412080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000006B41F0E8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150930/tbfadt-623)
ACPI: DSDT 0x000000006B412190 00CF57 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x000000006B4AAE80 000040
ACPI: APIC 0x000000006B41F1F8 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000006B41F280 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000006B41F2C8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000006B41F368 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000006B41F3A8 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 0x000000006B41FB10 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 0x000000006B41FDA0 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
ACPI: UEFI 0x000000006B41FF20 000042 (v01 ALASKA A M I 00000000 00000000)
ACPI: LPIT 0x000000006B41FF68 000104 (v01 ALASKA A M I 00000005 MSFT 0100000D)
ACPI: CSRT 0x000000006B420070 00014C (v00 INTEL LANFORDC 00000005 MSFT 0100000D)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
NODE_DATA(0) allocated [mem 0x27fff4000-0x27fff8fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000027fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000003efff]
node 0: [mem 0x0000000000040000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000001effffff]
node 0: [mem 0x0000000020200000-0x000000006aea1fff]
node 0: [mem 0x000000006af1d000-0x000000006b043fff]
node 0: [mem 0x000000006b837000-0x000000006bffffff]
node 0: [mem 0x0000000100000000-0x000000027fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
On node 0 totalpages: 2008368
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 6743 pages used for memmap
DMA32 zone: 431506 pages, LIFO batch:31
Normal zone: 24576 pages used for memmap
Normal zone: 1572864 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x6ef00000-0x7eefffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x1f000000-0x201fffff]
PM: Registered nosave memory: [mem 0x6aea2000-0x6af1cfff]
PM: Registered nosave memory: [mem 0x6b044000-0x6b4aafff]
PM: Registered nosave memory: [mem 0x6b4ab000-0x6b7d2fff]
PM: Registered nosave memory: [mem 0x6b7d3000-0x6b836fff]
PM: Registered nosave memory: [mem 0x6c000000-0x6eefffff]
PM: Registered nosave memory: [mem 0x6ef00000-0x7eefffff]
PM: Registered nosave memory: [mem 0x7ef00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff]
PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed05fff]
PM: Registered nosave memory: [mem 0xfed06000-0xfed06fff]
PM: Registered nosave memory: [mem 0xfed07000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed09fff]
PM: Registered nosave memory: [mem 0xfed0a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
PM: Registered nosave memory: [mem 0xfed1d000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfedbffff]
PM: Registered nosave memory: [mem 0xfedc0000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
e820: [mem 0x7ef00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88027fc00000 s98264 r8192 d28712 u524288
pcpu-alloc: s98264 r8192 d28712 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1976958
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7695568K/8033472K available (8469K kernel code, 1294K rwdata, 3984K rodata, 1484K init, 1316K bss, 337904K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:1024 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
tsc: PIT calibration matches PMTIMER. 1 loops
tsc: Detected 1599.927 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.85 BogoMIPS (lpj=6399708)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
ftrace: allocating 32129 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Celeron(R) CPU N3150 @ 1.60GHz (family: 0x6, model: 0x4c, stepping: 0x3)
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (12799.41 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x6b044000-0x6b4aafff] (4616192 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 4:04:11, date: 06/22/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802760E1800 000613 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802760F2400 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802760F5800 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802760FCB40 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [ID3C] (on)
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [CLK0] (off)
ACPI: Power Resource [CLK0] (off)
ACPI: Power Resource [CLK1] (off)
ACPI: Power Resource [FN00] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x80000000-0x80ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
pci 0000:00:13.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:13.0: reg 0x24: [mem 0x81315000-0x813157ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x81300000-0x8130ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0x81100000-0x811fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0x81000000-0x810fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x81310000-0x81313fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x81314000-0x8131401f]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x18: [mem 0x81200000-0x81200fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xa0000000-0xa0003fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0x81200000-0x812fffff]
pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xa00fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
e820: reserve RAM buffer [mem 0x6aea2000-0x6bffffff]
e820: reserve RAM buffer [mem 0x6b044000-0x6bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0500-0x05fe] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a0f] has been reserved
system 00:02: [io 0x0a10-0x0a1f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:07: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:07: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:07: [mem 0xfed06000-0xfed06fff] has been reserved
system 00:07: [mem 0xfed08000-0xfed09fff] has been reserved
system 00:07: [mem 0xfed80000-0xfedbffff] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
clocksource: Switched to clocksource acpi_pm
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.1: BAR 14: assigned [mem 0x81400000-0x815fffff]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x81600000-0x817fffff 64bit pref]
pci 0000:00:1c.1: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0x81200000-0x812fffff]
pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xa00fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.1: bridge window [mem 0x81400000-0x815fffff]
pci 0000:00:1c.1: bridge window [mem 0x81600000-0x817fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0x81200000-0x812fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xa00fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0x81400000-0x815fffff]
pci_bus 0000:02: resource 2 [mem 0x81600000-0x817fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 37368K (ffff8800336f4000 - ffff880035b72000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x61ef7000-0x65ef7000] (64MB) mapped at [ffff880061ef7000-ffff880065ef6fff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1498104252.579:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0x90000000, mapped to 0xffffc90001000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x33000020
intel_idle: v0.4.1 model 0x4C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (27 C)
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-81-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 7 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-81-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x406c3, pf=0x1, revision=0x353
microcode: CPU1 sig=0x406c3, pf=0x1, revision=0x353
microcode: CPU2 sig=0x406c3, pf=0x1, revision=0x353
microcode: CPU3 sig=0x406c3, pf=0x1, revision=0x353
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 4e3fcaabc4148de0b198d1fb3d36a6c6d4cf062b'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 5:587:60
acpi INT33BB:00: hash matches
rtc_cmos 00:00: setting system clock to 2017-06-22 04:04:12 UTC (1498104252)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1484K (ffffffff81f45000 - ffffffff820b8000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1760K (ffff880002848000 - ffff880002a00000)
Freeing unused kernel memory: 112K (ffff880002de4000 - ffff880002e00000)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
hidraw: raw HID events driver (C) Jiri Kosina
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm sds apst
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0x81315000 port 0x81315100 irq 118
ata2: SATA max UDMA/133 abar m2048@0x81315000 port 0x81315180 irq 118
[drm] Initialized drm 1.1.0 20060810
r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffffc90000e5c000, 4c:cc:6a:00:31:d5, XID 0c000800 IRQ 119
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[drm] Memory usable by graphics device = 2048M
checking generic (90000000 300000) vs hw (90000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
r8169 0000:01:00.0 enp1s0: renamed from eth0
usb 1-5: new high-speed USB device number 2 using xhci_hcd
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
usb 1-5: New USB device found, idVendor=05e3, idProduct=0608
usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-5: Product: USB2.0 Hub
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: TOSHIBA DT01ABA200V, MZ4OABB0, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ABA2 ABB0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2: SATA link down (SStatus 4 SControl 300)
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:09: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
sd 0:0:0:0: [sda] Attached SCSI disk
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-5.2: new high-speed USB device number 3 using xhci_hcd
usb 1-5.2: New USB device found, idVendor=0409, idProduct=005a
usb 1-5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-5.2:1.0: USB hub found
hub 1-5.2:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 1599.947 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170ff2fc09b, max_idle_ns: 440795267654 ns
usb 1-5.2.3: new full-speed USB device number 4 using xhci_hcd
usb 1-5.2.3: New USB device found, idVendor=0557, idProduct=8021
usb 1-5.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.2.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 1-5.2.3:1.0: USB hub found
hub 1-5.2.3:1.0: 4 ports detected
usb 1-5.2.3.1: new full-speed USB device number 5 using xhci_hcd
usb 1-5.2.3.1: New USB device found, idVendor=04b4, idProduct=0101
usb 1-5.2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.1: Product: SteelS쀁̄Љ̒DATA
usb 1-5.2.3.1: Manufacturer: DATACOMP
usb 1-5.2.3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.0/0003:04B4:0101.0001/input/input6
usb 1-5.2.3.2: new full-speed USB device number 6 using xhci_hcd
hid-generic 0003:04B4:0101.0001: input,hidraw0: USB HID v1.00 Keyboard [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input0
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.1/0003:04B4:0101.0002/input/input7
hid-generic 0003:04B4:0101.0002: input,hidraw1: USB HID v1.00 Device [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input1
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.2/0003:04B4:0101.0003/input/input8
hid-generic 0003:04B4:0101.0003: input,hidraw2: USB HID v1.10 Mouse [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input2
clocksource: Switched to clocksource tsc
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0004/input/input9
hid-generic 0003:046D:C246.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.0005/input/input10
hid-generic 0003:046D:C246.0005: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3: USB disconnect, device number 4
usb 1-5.2.3.1: USB disconnect, device number 5
usb 1-5.2.3.2: USB disconnect, device number 6
usb 1-5.2.3: new full-speed USB device number 7 using xhci_hcd
usb 1-5.2.3: New USB device found, idVendor=0557, idProduct=8021
usb 1-5.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.2.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 1-5.2.3:1.0: USB hub found
hub 1-5.2.3:1.0: 4 ports detected
usb 1-5.2.3.1: new full-speed USB device number 8 using xhci_hcd
usb 1-5.2.3.1: New USB device found, idVendor=04b4, idProduct=0101
usb 1-5.2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.1: Product: SteelS쀁̄Љ̒DATA
usb 1-5.2.3.1: Manufacturer: DATACOMP
usb 1-5.2.3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.0/0003:04B4:0101.0006/input/input11
hid-generic 0003:04B4:0101.0006: input,hidraw0: USB HID v1.00 Keyboard [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input0
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.1/0003:04B4:0101.0007/input/input12
hid-generic 0003:04B4:0101.0007: input,hidraw1: USB HID v1.00 Device [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input1
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.2/0003:04B4:0101.0008/input/input13
hid-generic 0003:04B4:0101.0008: input,hidraw2: USB HID v1.10 Mouse [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input2
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Read required files in advance.
systemd[1]: Reached target Slices.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Set console keymap...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Braille Device Support.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
systemd[1]: Mounting Debug File System...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Started Journal Service.
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd-journald[299]: Received request to flush runtime journal from PID 1
nfc: nfc_init: NFC Core ver 0.1
NET: Registered protocol family 39
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
SSE version of gcm_enc/dec engaged.
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
Adding 20479484k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:20479484k FS
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
usb 1-5.2.3.2: new full-speed USB device number 9 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0009/input/input22
hid-generic 0003:046D:C246.0009: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.000A/input/input23
hid-generic 0003:046D:C246.000A: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
audit: type=1400 audit(1498104269.161:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=860 comm="apparmor_parser"
audit: type=1400 audit(1498104269.161:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=860 comm="apparmor_parser"
audit: type=1400 audit(1498104269.161:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=860 comm="apparmor_parser"
audit: type=1400 audit(1498104269.161:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=860 comm="apparmor_parser"
audit: type=1400 audit(1498104269.185:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=859 comm="apparmor_parser"
audit: type=1400 audit(1498104269.185:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=859 comm="apparmor_parser"
audit: type=1400 audit(1498104269.185:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=864 comm="apparmor_parser"
audit: type=1400 audit(1498104269.185:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=864 comm="apparmor_parser"
audit: type=1400 audit(1498104269.213:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=866 comm="apparmor_parser"
audit: type=1400 audit(1498104269.213:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=866 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
audit_printk_skb: 36 callbacks suppressed
audit: type=1400 audit(1498104276.789:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1214 comm="apparmor_parser"
aufs 4.x-rcN-20160111
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
aufs au_opts_verify:1597:dockerd[1168]: dirperm1 breaks the protection by the permission bits on the lower branch
usb 1-5.2.3.2: USB disconnect, device number 9
usb 1-5.2.3.2: new full-speed USB device number 10 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.000B/input/input24
hid-generic 0003:046D:C246.000B: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.000C/input/input25
hid-generic 0003:046D:C246.000C: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=8564, idProduct=1000
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Mass Storage Device
usb 2-1: Manufacturer: JetFlash
usb 2-1: SerialNumber: 3120811545
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 2:0:0:0: Direct-Access JetFlash Transcend 16GB 1.00 PQ: 0 ANSI: 6
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 30867456 512-byte logical blocks: (15.8 GB/14.7 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 2:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1 gen() 1073 MB/s
raid6: sse2x1 xor() 2231 MB/s
raid6: sse2x2 gen() 1443 MB/s
raid6: sse2x2 xor() 2475 MB/s
raid6: sse2x4 gen() 1393 MB/s
raid6: sse2x4 xor() 1850 MB/s
raid6: using algorithm sse2x2 gen() 1443 MB/s
raid6: .... xor() 2475 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 7191.000 MB/sec
generic_sse: 6595.000 MB/sec
xor: using function: prefetch64-sse (7191.000 MB/sec)
Btrfs loaded
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethfc4a1bf entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethfc4a1bf: link is not ready
eth0: renamed from vethc84b132
IPv6: ADDRCONF(NETDEV_CHANGE): vethfc4a1bf: link becomes ready
docker0: port 1(vethfc4a1bf) entered forwarding state
docker0: port 1(vethfc4a1bf) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
docker0: port 1(vethfc4a1bf) entered disabled state
vethc84b132: renamed from eth0
docker0: port 1(vethfc4a1bf) entered disabled state
device vethfc4a1bf left promiscuous mode
docker0: port 1(vethfc4a1bf) entered disabled state
usb 2-1: USB disconnect, device number 2
xhci_hcd 0000:00:14.0: Stop endpoint command completion for disabled slot 10
usb 1-5.2.3.2: USB disconnect, device number 10
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth6808b36 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth6808b36: link is not ready
eth0: renamed from vethec423e5
IPv6: ADDRCONF(NETDEV_CHANGE): veth6808b36: link becomes ready
docker0: port 1(veth6808b36) entered forwarding state
docker0: port 1(veth6808b36) entered forwarding state
docker0: port 1(veth6808b36) entered forwarding state
docker0: port 1(veth6808b36) entered disabled state
vethec423e5: renamed from eth0
docker0: port 1(veth6808b36) entered disabled state
device veth6808b36 left promiscuous mode
docker0: port 1(veth6808b36) entered disabled state
aufs au_opts_verify:1597:dockerd[1208]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1208]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1208]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1208]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethc8717a4 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethc8717a4: link is not ready
eth0: renamed from veth497d691
IPv6: ADDRCONF(NETDEV_CHANGE): vethc8717a4: link becomes ready
docker0: port 1(vethc8717a4) entered forwarding state
docker0: port 1(vethc8717a4) entered forwarding state
docker0: port 1(vethc8717a4) entered forwarding state
usb 1-5.2.3.2: new full-speed USB device number 11 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.000D/input/input26
hid-generic 0003:046D:C246.000D: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.000E/input/input27
hid-generic 0003:046D:C246.000E: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
docker0: port 1(vethc8717a4) entered disabled state
veth497d691: renamed from eth0
docker0: port 1(vethc8717a4) entered disabled state
device vethc8717a4 left promiscuous mode
docker0: port 1(vethc8717a4) entered disabled state
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethc2ab049 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethc2ab049: link is not ready
eth0: renamed from veth3006006
IPv6: ADDRCONF(NETDEV_CHANGE): vethc2ab049: link becomes ready
docker0: port 1(vethc2ab049) entered forwarding state
docker0: port 1(vethc2ab049) entered forwarding state
docker0: port 1(vethc2ab049) entered forwarding state
veth3006006: renamed from eth0
docker0: port 1(vethc2ab049) entered disabled state
docker0: port 1(vethc2ab049) entered disabled state
device vethc2ab049 left promiscuous mode
docker0: port 1(vethc2ab049) entered disabled state
aufs au_opts_verify:1597:dockerd[1140]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth47d3485 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth47d3485: link is not ready
eth0: renamed from vetha38813b
IPv6: ADDRCONF(NETDEV_CHANGE): veth47d3485: link becomes ready
docker0: port 1(veth47d3485) entered forwarding state
docker0: port 1(veth47d3485) entered forwarding state
docker0: port 1(veth47d3485) entered forwarding state
docker0: port 1(veth47d3485) entered disabled state
vetha38813b: renamed from eth0
docker0: port 1(veth47d3485) entered disabled state
device veth47d3485 left promiscuous mode
docker0: port 1(veth47d3485) entered disabled state
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth5129abd entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth5129abd: link is not ready
docker0: port 1(veth5129abd) entered forwarding state
docker0: port 1(veth5129abd) entered forwarding state
docker0: port 1(veth5129abd) entered disabled state
eth0: renamed from veth29c7d3c
IPv6: ADDRCONF(NETDEV_CHANGE): veth5129abd: link becomes ready
docker0: port 1(veth5129abd) entered forwarding state
docker0: port 1(veth5129abd) entered forwarding state
docker0: port 1(veth5129abd) entered disabled state
veth29c7d3c: renamed from eth0
docker0: port 1(veth5129abd) entered disabled state
device veth5129abd left promiscuous mode
docker0: port 1(veth5129abd) entered disabled state
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth0cfb629 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth0cfb629: link is not ready
eth0: renamed from vethe2a6b75
IPv6: ADDRCONF(NETDEV_CHANGE): veth0cfb629: link becomes ready
docker0: port 1(veth0cfb629) entered forwarding state
docker0: port 1(veth0cfb629) entered forwarding state
docker0: port 1(veth0cfb629) entered disabled state
vethe2a6b75: renamed from eth0
docker0: port 1(veth0cfb629) entered disabled state
device veth0cfb629 left promiscuous mode
docker0: port 1(veth0cfb629) entered disabled state
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethf101a95 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethf101a95: link is not ready
docker0: port 1(vethf101a95) entered forwarding state
docker0: port 1(vethf101a95) entered forwarding state
docker0: port 1(vethf101a95) entered disabled state
eth0: renamed from veth8bdf38c
IPv6: ADDRCONF(NETDEV_CHANGE): vethf101a95: link becomes ready
docker0: port 1(vethf101a95) entered forwarding state
docker0: port 1(vethf101a95) entered forwarding state
docker0: port 1(vethf101a95) entered disabled state
veth8bdf38c: renamed from eth0
docker0: port 1(vethf101a95) entered disabled state
device vethf101a95 left promiscuous mode
docker0: port 1(vethf101a95) entered disabled state
aufs au_opts_verify:1597:dockerd[21323]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth165d7ad entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth165d7ad: link is not ready
eth0: renamed from veth75be5b7
IPv6: ADDRCONF(NETDEV_CHANGE): veth165d7ad: link becomes ready
docker0: port 1(veth165d7ad) entered forwarding state
docker0: port 1(veth165d7ad) entered forwarding state
docker0: port 1(veth165d7ad) entered forwarding state
docker0: port 1(veth165d7ad) entered disabled state
veth75be5b7: renamed from eth0
docker0: port 1(veth165d7ad) entered disabled state
device veth165d7ad left promiscuous mode
docker0: port 1(veth165d7ad) entered disabled state
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethac7870c entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethac7870c: link is not ready
docker0: port 1(vethac7870c) entered forwarding state
docker0: port 1(vethac7870c) entered forwarding state
docker0: port 1(vethac7870c) entered disabled state
eth0: renamed from vethdef1089
IPv6: ADDRCONF(NETDEV_CHANGE): vethac7870c: link becomes ready
docker0: port 1(vethac7870c) entered forwarding state
docker0: port 1(vethac7870c) entered forwarding state
docker0: port 1(vethac7870c) entered disabled state
vethdef1089: renamed from eth0
docker0: port 1(vethac7870c) entered disabled state
device vethac7870c left promiscuous mode
docker0: port 1(vethac7870c) entered disabled state
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethbd742b4 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethbd742b4: link is not ready
docker0: port 1(vethbd742b4) entered forwarding state
docker0: port 1(vethbd742b4) entered forwarding state
docker0: port 1(vethbd742b4) entered disabled state
eth0: renamed from veth9eb879b
IPv6: ADDRCONF(NETDEV_CHANGE): vethbd742b4: link becomes ready
docker0: port 1(vethbd742b4) entered forwarding state
docker0: port 1(vethbd742b4) entered forwarding state
docker0: port 1(vethbd742b4) entered disabled state
veth9eb879b: renamed from eth0
docker0: port 1(vethbd742b4) entered disabled state
device vethbd742b4 left promiscuous mode
docker0: port 1(vethbd742b4) entered disabled state
aufs au_opts_verify:1597:dockerd[1209]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1178]: dirperm1 breaks the protection by the permission bits on the lower branch
unregister_netdevice: waiting for lo to become free. Usage count = 1
unregister_netdevice: waiting for lo to become free. Usage count = 1
unregister_netdevice: waiting for lo to become free. Usage count = 0
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1207]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth93b926e entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth93b926e: link is not ready
eth0: renamed from veth31e1430
IPv6: ADDRCONF(NETDEV_CHANGE): veth93b926e: link becomes ready
docker0: port 1(veth93b926e) entered forwarding state
docker0: port 1(veth93b926e) entered forwarding state
usb 1-5.2.3: USB disconnect, device number 7
usb 1-5.2.3.1: USB disconnect, device number 8
usb 1-5.2.3.2: USB disconnect, device number 11
usb 1-5.2.3: new full-speed USB device number 12 using xhci_hcd
usb 1-5.2.3: New USB device found, idVendor=0557, idProduct=8021
usb 1-5.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.2.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 1-5.2.3:1.0: USB hub found
hub 1-5.2.3:1.0: 4 ports detected
usb 1-5.2.3.1: new full-speed USB device number 13 using xhci_hcd
usb 1-5.2.3.1: New USB device found, idVendor=04b4, idProduct=0101
usb 1-5.2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.1: Product: SteelS쀁̄Љ̒DATA
usb 1-5.2.3.1: Manufacturer: DATACOMP
usb 1-5.2.3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.0/0003:04B4:0101.000F/input/input28
hid-generic 0003:04B4:0101.000F: input,hidraw0: USB HID v1.00 Keyboard [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input0
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.1/0003:04B4:0101.0010/input/input29
hid-generic 0003:04B4:0101.0010: input,hidraw1: USB HID v1.00 Device [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input1
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.2/0003:04B4:0101.0011/input/input30
hid-generic 0003:04B4:0101.0011: input,hidraw2: USB HID v1.10 Mouse [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input2
docker0: port 1(veth93b926e) entered forwarding state
usb 1-5.2.3.2: new full-speed USB device number 14 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0012/input/input31
hid-generic 0003:046D:C246.0012: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.0013/input/input32
hid-generic 0003:046D:C246.0013: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
perf interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
docker0: port 1(veth93b926e) entered disabled state
veth31e1430: renamed from eth0
docker0: port 1(veth93b926e) entered disabled state
device veth93b926e left promiscuous mode
docker0: port 1(veth93b926e) entered disabled state
aufs au_opts_verify:1597:dockerd[1168]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1168]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1168]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1168]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth27f1c6b entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth27f1c6b: link is not ready
docker0: port 1(veth27f1c6b) entered forwarding state
docker0: port 1(veth27f1c6b) entered forwarding state
docker0: port 1(veth27f1c6b) entered disabled state
eth0: renamed from vethef376e0
IPv6: ADDRCONF(NETDEV_CHANGE): veth27f1c6b: link becomes ready
docker0: port 1(veth27f1c6b) entered forwarding state
docker0: port 1(veth27f1c6b) entered forwarding state
docker0: port 1(veth27f1c6b) entered forwarding state
docker0: port 1(veth27f1c6b) entered disabled state
vethef376e0: renamed from eth0
docker0: port 1(veth27f1c6b) entered disabled state
device veth27f1c6b left promiscuous mode
docker0: port 1(veth27f1c6b) entered disabled state
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth7ba535b entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth7ba535b: link is not ready
docker0: port 1(veth7ba535b) entered forwarding state
docker0: port 1(veth7ba535b) entered forwarding state
docker0: port 1(veth7ba535b) entered disabled state
eth0: renamed from veth77b4935
IPv6: ADDRCONF(NETDEV_CHANGE): veth7ba535b: link becomes ready
docker0: port 1(veth7ba535b) entered forwarding state
docker0: port 1(veth7ba535b) entered forwarding state
docker0: port 1(veth7ba535b) entered disabled state
veth77b4935: renamed from eth0
docker0: port 1(veth7ba535b) entered disabled state
device veth7ba535b left promiscuous mode
docker0: port 1(veth7ba535b) entered disabled state
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1208]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1208]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1208]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth3bc4dc7 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth3bc4dc7: link is not ready
eth0: renamed from veth96e905a
IPv6: ADDRCONF(NETDEV_CHANGE): veth3bc4dc7: link becomes ready
docker0: port 1(veth3bc4dc7) entered forwarding state
docker0: port 1(veth3bc4dc7) entered forwarding state
docker0: port 1(veth3bc4dc7) entered disabled state
veth96e905a: renamed from eth0
docker0: port 1(veth3bc4dc7) entered disabled state
device veth3bc4dc7 left promiscuous mode
docker0: port 1(veth3bc4dc7) entered disabled state
aufs au_opts_verify:1597:dockerd[21323]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21323]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21323]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21323]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethae8d1f3 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethae8d1f3: link is not ready
docker0: port 1(vethae8d1f3) entered forwarding state
docker0: port 1(vethae8d1f3) entered forwarding state
docker0: port 1(vethae8d1f3) entered disabled state
eth0: renamed from veth2e8af84
IPv6: ADDRCONF(NETDEV_CHANGE): vethae8d1f3: link becomes ready
docker0: port 1(vethae8d1f3) entered forwarding state
docker0: port 1(vethae8d1f3) entered forwarding state
docker0: port 1(vethae8d1f3) entered disabled state
veth2e8af84: renamed from eth0
docker0: port 1(vethae8d1f3) entered disabled state
device vethae8d1f3 left promiscuous mode
docker0: port 1(vethae8d1f3) entered disabled state
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethd0ab8d9 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethd0ab8d9: link is not ready
eth0: renamed from veth1991208
IPv6: ADDRCONF(NETDEV_CHANGE): vethd0ab8d9: link becomes ready
docker0: port 1(vethd0ab8d9) entered forwarding state
docker0: port 1(vethd0ab8d9) entered forwarding state
docker0: port 1(vethd0ab8d9) entered forwarding state
veth1991208: renamed from eth0
docker0: port 1(vethd0ab8d9) entered disabled state
docker0: port 1(vethd0ab8d9) entered disabled state
device vethd0ab8d9 left promiscuous mode
docker0: port 1(vethd0ab8d9) entered disabled state
aufs au_opts_verify:1597:dockerd[1208]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1208]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1208]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1208]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethdc9ee89 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethdc9ee89: link is not ready
docker0: port 1(vethdc9ee89) entered forwarding state
docker0: port 1(vethdc9ee89) entered forwarding state
docker0: port 1(vethdc9ee89) entered disabled state
eth0: renamed from veth9c28bb5
IPv6: ADDRCONF(NETDEV_CHANGE): vethdc9ee89: link becomes ready
docker0: port 1(vethdc9ee89) entered forwarding state
docker0: port 1(vethdc9ee89) entered forwarding state
docker0: port 1(vethdc9ee89) entered disabled state
veth9c28bb5: renamed from eth0
docker0: port 1(vethdc9ee89) entered disabled state
device vethdc9ee89 left promiscuous mode
docker0: port 1(vethdc9ee89) entered disabled state
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth6610ecb entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth6610ecb: link is not ready
docker0: port 1(veth6610ecb) entered forwarding state
docker0: port 1(veth6610ecb) entered forwarding state
docker0: port 1(veth6610ecb) entered disabled state
eth0: renamed from vethd65cadc
IPv6: ADDRCONF(NETDEV_CHANGE): veth6610ecb: link becomes ready
docker0: port 1(veth6610ecb) entered forwarding state
docker0: port 1(veth6610ecb) entered forwarding state
docker0: port 1(veth6610ecb) entered disabled state
vethd65cadc: renamed from eth0
docker0: port 1(veth6610ecb) entered disabled state
device veth6610ecb left promiscuous mode
docker0: port 1(veth6610ecb) entered disabled state
aufs au_opts_verify:1597:dockerd[1209]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21324]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1209]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1209]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1209]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1209]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1209]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1209]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1209]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[1206]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[21323]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethb74cfa0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethb74cfa0: link is not ready
unregister_netdevice: waiting for lo to become free. Usage count = 1
eth0: renamed from veth3e196a8
IPv6: ADDRCONF(NETDEV_CHANGE): vethb74cfa0: link becomes ready
docker0: port 1(vethb74cfa0) entered forwarding state
docker0: port 1(vethb74cfa0) entered forwarding state
docker0: port 1(vethb74cfa0) entered forwarding state
usb 1-5.2.3: USB disconnect, device number 12
usb 1-5.2.3.1: USB disconnect, device number 13
usb 1-5.2.3.2: USB disconnect, device number 14
usb 1-5.2.3: new full-speed USB device number 15 using xhci_hcd
usb 1-5.2.3: New USB device found, idVendor=0557, idProduct=8021
usb 1-5.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.2.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 1-5.2.3:1.0: USB hub found
hub 1-5.2.3:1.0: 4 ports detected
usb 1-5.2.3.1: new full-speed USB device number 16 using xhci_hcd
usb 1-5.2.3.1: New USB device found, idVendor=04b4, idProduct=0101
usb 1-5.2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.1: Product: SteelS쀁̄Љ̒DATA
usb 1-5.2.3.1: Manufacturer: DATACOMP
usb 1-5.2.3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.0/0003:04B4:0101.0014/input/input33
hid-generic 0003:04B4:0101.0014: input,hidraw0: USB HID v1.00 Keyboard [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input0
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.1/0003:04B4:0101.0015/input/input34
hid-generic 0003:04B4:0101.0015: input,hidraw1: USB HID v1.00 Device [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input1
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.2/0003:04B4:0101.0016/input/input35
hid-generic 0003:04B4:0101.0016: input,hidraw2: USB HID v1.10 Mouse [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input2
docker0: port 1(vethb74cfa0) entered disabled state
veth3e196a8: renamed from eth0
docker0: port 1(vethb74cfa0) entered disabled state
device vethb74cfa0 left promiscuous mode
docker0: port 1(vethb74cfa0) entered disabled state
usb 1-5.2.3.2: new full-speed USB device number 17 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0017/input/input36
hid-generic 0003:046D:C246.0017: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.0018/input/input37
hid-generic 0003:046D:C246.0018: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
aufs au_opts_verify:1597:dockerd[25611]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25555]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth0f2d564 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth0f2d564: link is not ready
eth0: renamed from vethe7d3d2c
IPv6: ADDRCONF(NETDEV_CHANGE): veth0f2d564: link becomes ready
docker0: port 1(veth0f2d564) entered forwarding state
docker0: port 1(veth0f2d564) entered forwarding state
docker0: port 1(veth0f2d564) entered forwarding state
usb 1-5.2.3: USB disconnect, device number 15
usb 1-5.2.3.1: USB disconnect, device number 16
usb 1-5.2.3.2: USB disconnect, device number 17
usb 1-5.2.3: new full-speed USB device number 18 using xhci_hcd
usb 1-5.2.3: New USB device found, idVendor=0557, idProduct=8021
usb 1-5.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.2.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 1-5.2.3:1.0: USB hub found
hub 1-5.2.3:1.0: 4 ports detected
usb 1-5.2.3.1: new full-speed USB device number 19 using xhci_hcd
usb 1-5.2.3.1: New USB device found, idVendor=04b4, idProduct=0101
usb 1-5.2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.1: Product: SteelS쀁̄Љ̒DATA
usb 1-5.2.3.1: Manufacturer: DATACOMP
usb 1-5.2.3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.0/0003:04B4:0101.0019/input/input38
hid-generic 0003:04B4:0101.0019: input,hidraw0: USB HID v1.00 Keyboard [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input0
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.1/0003:04B4:0101.001A/input/input39
hid-generic 0003:04B4:0101.001A: input,hidraw1: USB HID v1.00 Device [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input1
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.2/0003:04B4:0101.001B/input/input40
hid-generic 0003:04B4:0101.001B: input,hidraw2: USB HID v1.10 Mouse [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input2
usb 1-5.2.3.2: new full-speed USB device number 20 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.001C/input/input41
hid-generic 0003:046D:C246.001C: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.001D/input/input42
hid-generic 0003:046D:C246.001D: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3: USB disconnect, device number 18
usb 1-5.2.3.1: USB disconnect, device number 19
usb 1-5.2.3.2: USB disconnect, device number 20
usb 1-5.2.3: new full-speed USB device number 21 using xhci_hcd
usb 1-5.2.3: New USB device found, idVendor=0557, idProduct=8021
usb 1-5.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.2.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 1-5.2.3:1.0: USB hub found
hub 1-5.2.3:1.0: 4 ports detected
usb 1-5.2.3.1: new full-speed USB device number 22 using xhci_hcd
usb 1-5.2.3.1: New USB device found, idVendor=04b4, idProduct=0101
usb 1-5.2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.1: Product: SteelS쀁̄Љ̒DATA
usb 1-5.2.3.1: Manufacturer: DATACOMP
usb 1-5.2.3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.0/0003:04B4:0101.001E/input/input43
hid-generic 0003:04B4:0101.001E: input,hidraw0: USB HID v1.00 Keyboard [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input0
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.1/0003:04B4:0101.001F/input/input44
hid-generic 0003:04B4:0101.001F: input,hidraw1: USB HID v1.00 Device [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input1
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.2/0003:04B4:0101.0020/input/input45
hid-generic 0003:04B4:0101.0020: input,hidraw2: USB HID v1.10 Mouse [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input2
usb 1-5.2.3.2: new full-speed USB device number 23 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0021/input/input46
hid-generic 0003:046D:C246.0021: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.0022/input/input47
hid-generic 0003:046D:C246.0022: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3.2: USB disconnect, device number 23
usb 1-5.2.3.2: new full-speed USB device number 24 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0023/input/input48
hid-generic 0003:046D:C246.0023: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.0024/input/input49
hid-generic 0003:046D:C246.0024: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3.2: USB disconnect, device number 24
usb 1-5.2.3.2: new full-speed USB device number 25 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0025/input/input50
hid-generic 0003:046D:C246.0025: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.0026/input/input51
hid-generic 0003:046D:C246.0026: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3: USB disconnect, device number 21
usb 1-5.2.3.1: USB disconnect, device number 22
usb 1-5.2.3.2: USB disconnect, device number 25
usb 1-5.2.3: new full-speed USB device number 26 using xhci_hcd
usb 1-5.2.3: New USB device found, idVendor=0557, idProduct=8021
usb 1-5.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.2.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 1-5.2.3:1.0: USB hub found
hub 1-5.2.3:1.0: 4 ports detected
usb 1-5.2.3.1: new full-speed USB device number 27 using xhci_hcd
usb 1-5.2.3.1: New USB device found, idVendor=04b4, idProduct=0101
usb 1-5.2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.1: Product: SteelS쀁̄Љ̒DATA
usb 1-5.2.3.1: Manufacturer: DATACOMP
usb 1-5.2.3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.0/0003:04B4:0101.0027/input/input52
hid-generic 0003:04B4:0101.0027: input,hidraw0: USB HID v1.00 Keyboard [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input0
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.1/0003:04B4:0101.0028/input/input53
hid-generic 0003:04B4:0101.0028: input,hidraw1: USB HID v1.00 Device [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input1
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.2/0003:04B4:0101.0029/input/input54
hid-generic 0003:04B4:0101.0029: input,hidraw2: USB HID v1.10 Mouse [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input2
usb 1-5.2.3.2: new full-speed USB device number 28 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.002A/input/input55
hid-generic 0003:046D:C246.002A: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.002B/input/input56
hid-generic 0003:046D:C246.002B: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
perf interrupt took too long (5011 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
docker0: port 1(veth0f2d564) entered disabled state
vethe7d3d2c: renamed from eth0
docker0: port 1(veth0f2d564) entered disabled state
device veth0f2d564 left promiscuous mode
docker0: port 1(veth0f2d564) entered disabled state
aufs au_opts_verify:1597:dockerd[26278]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[26278]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[26278]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[26278]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[26278]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[26278]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth4e6a162 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth4e6a162: link is not ready
eth0: renamed from vethe8a9a9d
IPv6: ADDRCONF(NETDEV_CHANGE): veth4e6a162: link becomes ready
docker0: port 1(veth4e6a162) entered forwarding state
docker0: port 1(veth4e6a162) entered forwarding state
docker0: port 1(veth4e6a162) entered forwarding state
docker0: port 1(veth4e6a162) entered disabled state
vethe8a9a9d: renamed from eth0
docker0: port 1(veth4e6a162) entered disabled state
device veth4e6a162 left promiscuous mode
docker0: port 1(veth4e6a162) entered disabled state
usb 1-5.2.3.2: USB disconnect, device number 28
usb 1-5.2.3.2: new full-speed USB device number 29 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.002C/input/input57
hid-generic 0003:046D:C246.002C: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.002D/input/input58
hid-generic 0003:046D:C246.002D: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
aufs au_opts_verify:1597:dockerd[25558]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25558]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25558]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25558]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25558]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25558]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth160fb08 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth160fb08: link is not ready
eth0: renamed from veth585d5d9
IPv6: ADDRCONF(NETDEV_CHANGE): veth160fb08: link becomes ready
docker0: port 1(veth160fb08) entered forwarding state
docker0: port 1(veth160fb08) entered forwarding state
docker0: port 1(veth160fb08) entered forwarding state
usb 1-5.2.3: USB disconnect, device number 26
usb 1-5.2.3.1: USB disconnect, device number 27
usb 1-5.2.3.2: USB disconnect, device number 29
usb 1-5.2.3: new full-speed USB device number 30 using xhci_hcd
usb 1-5.2.3: New USB device found, idVendor=0557, idProduct=8021
usb 1-5.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.2.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 1-5.2.3:1.0: USB hub found
hub 1-5.2.3:1.0: 4 ports detected
usb 1-5.2.3.1: new full-speed USB device number 31 using xhci_hcd
usb 1-5.2.3.1: New USB device found, idVendor=04b4, idProduct=0101
usb 1-5.2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.1: Product: SteelS쀁̄Љ̒DATA
usb 1-5.2.3.1: Manufacturer: DATACOMP
usb 1-5.2.3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.0/0003:04B4:0101.002E/input/input59
hid-generic 0003:04B4:0101.002E: input,hidraw0: USB HID v1.00 Keyboard [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input0
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.1/0003:04B4:0101.002F/input/input60
hid-generic 0003:04B4:0101.002F: input,hidraw1: USB HID v1.00 Device [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input1
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.2/0003:04B4:0101.0030/input/input61
hid-generic 0003:04B4:0101.0030: input,hidraw2: USB HID v1.10 Mouse [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input2
usb 1-5.2.3.2: new full-speed USB device number 32 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0031/input/input62
hid-generic 0003:046D:C246.0031: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.0032/input/input63
hid-generic 0003:046D:C246.0032: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
docker0: port 1(veth160fb08) entered disabled state
veth585d5d9: renamed from eth0
docker0: port 1(veth160fb08) entered disabled state
device veth160fb08 left promiscuous mode
docker0: port 1(veth160fb08) entered disabled state
aufs au_opts_verify:1597:dockerd[25552]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25555]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25555]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25555]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth3e96135 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth3e96135: link is not ready
eth0: renamed from veth43bbaaa
IPv6: ADDRCONF(NETDEV_CHANGE): veth3e96135: link becomes ready
docker0: port 1(veth3e96135) entered forwarding state
docker0: port 1(veth3e96135) entered forwarding state
docker0: port 1(veth3e96135) entered forwarding state
docker0: port 1(veth3e96135) entered disabled state
veth43bbaaa: renamed from eth0
docker0: port 1(veth3e96135) entered disabled state
device veth3e96135 left promiscuous mode
docker0: port 1(veth3e96135) entered disabled state
aufs au_opts_verify:1597:dockerd[25555]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25555]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25555]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[26278]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethf5a0fdb entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethf5a0fdb: link is not ready
docker0: port 1(vethf5a0fdb) entered forwarding state
docker0: port 1(vethf5a0fdb) entered forwarding state
docker0: port 1(vethf5a0fdb) entered disabled state
eth0: renamed from vethdbb35a2
IPv6: ADDRCONF(NETDEV_CHANGE): vethf5a0fdb: link becomes ready
docker0: port 1(vethf5a0fdb) entered forwarding state
docker0: port 1(vethf5a0fdb) entered forwarding state
docker0: port 1(vethf5a0fdb) entered disabled state
vethdbb35a2: renamed from eth0
docker0: port 1(vethf5a0fdb) entered disabled state
device vethf5a0fdb left promiscuous mode
docker0: port 1(vethf5a0fdb) entered disabled state
aufs au_opts_verify:1597:dockerd[26278]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25552]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25552]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25552]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth0a1d3bc entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth0a1d3bc: link is not ready
docker0: port 1(veth0a1d3bc) entered forwarding state
docker0: port 1(veth0a1d3bc) entered forwarding state
docker0: port 1(veth0a1d3bc) entered disabled state
eth0: renamed from veth02862db
IPv6: ADDRCONF(NETDEV_CHANGE): veth0a1d3bc: link becomes ready
docker0: port 1(veth0a1d3bc) entered forwarding state
docker0: port 1(veth0a1d3bc) entered forwarding state
usb 1-5.2.3.2: USB disconnect, device number 32
docker0: port 1(veth0a1d3bc) entered forwarding state
docker0: port 1(veth0a1d3bc) entered disabled state
veth02862db: renamed from eth0
docker0: port 1(veth0a1d3bc) entered disabled state
device veth0a1d3bc left promiscuous mode
docker0: port 1(veth0a1d3bc) entered disabled state
aufs au_opts_verify:1597:dockerd[25558]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25561]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25561]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25561]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethfe1c401 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethfe1c401: link is not ready
docker0: port 1(vethfe1c401) entered forwarding state
docker0: port 1(vethfe1c401) entered forwarding state
docker0: port 1(vethfe1c401) entered disabled state
eth0: renamed from vethc814e26
IPv6: ADDRCONF(NETDEV_CHANGE): vethfe1c401: link becomes ready
docker0: port 1(vethfe1c401) entered forwarding state
docker0: port 1(vethfe1c401) entered forwarding state
docker0: port 1(vethfe1c401) entered disabled state
vethc814e26: renamed from eth0
docker0: port 1(vethfe1c401) entered disabled state
device vethfe1c401 left promiscuous mode
docker0: port 1(vethfe1c401) entered disabled state
aufs au_opts_verify:1597:dockerd[27670]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[27670]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[27670]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[27670]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[27670]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25558]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25558]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25558]: dirperm1 breaks the protection by the permission bits on the lower branch
usb 1-5.2.3.2: new full-speed USB device number 33 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0033/input/input64
hid-generic 0003:046D:C246.0033: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.0034/input/input65
hid-generic 0003:046D:C246.0034: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
aufs au_opts_verify:1597:dockerd[25753]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25753]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25558]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethe597037 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethe597037: link is not ready
eth0: renamed from veth236307d
IPv6: ADDRCONF(NETDEV_CHANGE): vethe597037: link becomes ready
docker0: port 1(vethe597037) entered forwarding state
docker0: port 1(vethe597037) entered forwarding state
docker0: port 1(vethe597037) entered forwarding state
unregister_netdevice: waiting for lo to become free. Usage count = 1
usb 1-5.2.3: USB disconnect, device number 30
usb 1-5.2.3.1: USB disconnect, device number 31
usb 1-5.2.3.2: USB disconnect, device number 33
usb 1-5.2.3: new full-speed USB device number 34 using xhci_hcd
usb 1-5.2.3: New USB device found, idVendor=0557, idProduct=8021
usb 1-5.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.2.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 1-5.2.3:1.0: USB hub found
hub 1-5.2.3:1.0: 4 ports detected
usb 1-5.2.3.1: new full-speed USB device number 35 using xhci_hcd
usb 1-5.2.3.1: New USB device found, idVendor=04b4, idProduct=0101
usb 1-5.2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.1: Product: SteelS쀁̄Љ̒DATA
usb 1-5.2.3.1: Manufacturer: DATACOMP
usb 1-5.2.3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.0/0003:04B4:0101.0035/input/input66
hid-generic 0003:04B4:0101.0035: input,hidraw0: USB HID v1.00 Keyboard [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input0
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.1/0003:04B4:0101.0036/input/input67
hid-generic 0003:04B4:0101.0036: input,hidraw1: USB HID v1.00 Device [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input1
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.2/0003:04B4:0101.0037/input/input68
hid-generic 0003:04B4:0101.0037: input,hidraw2: USB HID v1.10 Mouse [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input2
usb 1-5.2.3.2: new full-speed USB device number 36 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0038/input/input69
hid-generic 0003:046D:C246.0038: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.0039/input/input70
hid-generic 0003:046D:C246.0039: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3.2: USB disconnect, device number 36
usb 1-5.2.3.2: new full-speed USB device number 37 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.003A/input/input71
hid-generic 0003:046D:C246.003A: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.003B/input/input72
hid-generic 0003:046D:C246.003B: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3.2: USB disconnect, device number 37
usb 1-5.2.3.2: new full-speed USB device number 38 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.003C/input/input73
hid-generic 0003:046D:C246.003C: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.003D/input/input74
hid-generic 0003:046D:C246.003D: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
docker0: port 1(vethe597037) entered disabled state
veth236307d: renamed from eth0
docker0: port 1(vethe597037) entered disabled state
device vethe597037 left promiscuous mode
docker0: port 1(vethe597037) entered disabled state
usb 1-5.2.3: USB disconnect, device number 34
usb 1-5.2.3.1: USB disconnect, device number 35
usb 1-5.2.3.2: USB disconnect, device number 38
usb 1-5.2.3: new full-speed USB device number 39 using xhci_hcd
usb 1-5.2.3: New USB device found, idVendor=0557, idProduct=8021
usb 1-5.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.2.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 1-5.2.3:1.0: USB hub found
hub 1-5.2.3:1.0: 4 ports detected
usb 1-5.2.3.1: new full-speed USB device number 40 using xhci_hcd
usb 1-5.2.3.1: New USB device found, idVendor=04b4, idProduct=0101
usb 1-5.2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.1: Product: SteelS쀁̄Љ̒DATA
usb 1-5.2.3.1: Manufacturer: DATACOMP
usb 1-5.2.3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.0/0003:04B4:0101.003E/input/input75
hid-generic 0003:04B4:0101.003E: input,hidraw0: USB HID v1.00 Keyboard [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input0
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.1/0003:04B4:0101.003F/input/input76
hid-generic 0003:04B4:0101.003F: input,hidraw1: USB HID v1.00 Device [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input1
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.2/0003:04B4:0101.0040/input/input77
hid-generic 0003:04B4:0101.0040: input,hidraw2: USB HID v1.10 Mouse [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input2
usb 1-5.2.3.2: new full-speed USB device number 41 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0041/input/input78
hid-generic 0003:046D:C246.0041: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.0042/input/input79
hid-generic 0003:046D:C246.0042: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3: USB disconnect, device number 39
usb 1-5.2.3.1: USB disconnect, device number 40
usb 1-5.2.3.2: USB disconnect, device number 41
usb 1-5.2.3: new full-speed USB device number 42 using xhci_hcd
usb 1-5.2.3: New USB device found, idVendor=0557, idProduct=8021
usb 1-5.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.2.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 1-5.2.3:1.0: USB hub found
hub 1-5.2.3:1.0: 4 ports detected
usb 1-5.2.3.1: new full-speed USB device number 43 using xhci_hcd
usb 1-5.2.3.1: New USB device found, idVendor=04b4, idProduct=0101
usb 1-5.2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.1: Product: SteelS쀁̄Љ̒DATA
usb 1-5.2.3.1: Manufacturer: DATACOMP
usb 1-5.2.3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.0/0003:04B4:0101.0043/input/input80
hid-generic 0003:04B4:0101.0043: input,hidraw0: USB HID v1.00 Keyboard [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input0
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.1/0003:04B4:0101.0044/input/input81
hid-generic 0003:04B4:0101.0044: input,hidraw1: USB HID v1.00 Device [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input1
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.2/0003:04B4:0101.0045/input/input82
hid-generic 0003:04B4:0101.0045: input,hidraw2: USB HID v1.10 Mouse [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input2
usb 1-5.2.3.2: new full-speed USB device number 44 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0046/input/input83
hid-generic 0003:046D:C246.0046: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.0047/input/input84
hid-generic 0003:046D:C246.0047: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3.2: USB disconnect, device number 44
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
i8042 aux 00:04: System wakeup disabled by ACPI
serial 00:03: disabled
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 724.348 msecs
PM: late suspend of devices complete after 15.906 msecs
r8169 0000:01:00.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.357 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 120
smpboot: CPU 1 is now offline
Broke affinity for irq 119
Broke affinity for irq 120
smpboot: CPU 2 is now offline
Broke affinity for irq 117
Broke affinity for irq 118
Broke affinity for irq 119
Broke affinity for irq 120
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:00: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 13.692 msecs
PM: early resume of devices complete after 76.096 msecs
r8169 0000:01:00.0: System wakeup disabled by ACPI
rtc_cmos 00:00: System wakeup disabled by ACPI
serial 00:03: activated
sd 0:0:0:0: [sda] Starting disk
r8169 0000:01:00.0 enp1s0: link down
PM: resume of devices complete after 191.696 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
usb 1-5.2.3.2: new full-speed USB device number 45 using xhci_hcd
ata2: SATA link down (SStatus 4 SControl 300)
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0048/input/input88
hid-generic 0003:046D:C246.0048: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.0049/input/input89
hid-generic 0003:046D:C246.0049: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
r8169 0000:01:00.0 enp1s0: link up
ata1: link is slow to respond, please be patient (ready=0)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd
usb 2-1: New USB device found, idVendor=8564, idProduct=1000
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: Mass Storage Device
usb 2-1: Manufacturer: JetFlash
usb 2-1: SerialNumber: 3120811545
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host3: usb-storage 2-1:1.0
scsi 3:0:0:0: Direct-Access JetFlash Transcend 16GB 1.00 PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 30867456 512-byte logical blocks: (15.8 GB/14.7 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 3:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1: USB disconnect, device number 3
xhci_hcd 0000:00:14.0: Stop endpoint command completion for disabled slot 17
usb 1-5.2.3.2: USB disconnect, device number 45
usb 1-5.2.3.2: new full-speed USB device number 46 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.004A/input/input90
hid-generic 0003:046D:C246.004A: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.004B/input/input91
hid-generic 0003:046D:C246.004B: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3.2: USB disconnect, device number 46
usb 1-5.2.3.2: new full-speed USB device number 47 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.004C/input/input92
hid-generic 0003:046D:C246.004C: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.004D/input/input93
hid-generic 0003:046D:C246.004D: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3.2: USB disconnect, device number 47
usb 1-5.2.3.2: new full-speed USB device number 48 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.004E/input/input94
hid-generic 0003:046D:C246.004E: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.004F/input/input95
hid-generic 0003:046D:C246.004F: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3.2: USB disconnect, device number 48
usb 1-5.2.3.2: new full-speed USB device number 49 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0050/input/input96
hid-generic 0003:046D:C246.0050: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.0051/input/input97
hid-generic 0003:046D:C246.0051: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3.2: USB disconnect, device number 49
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
i8042 aux 00:04: System wakeup disabled by ACPI
serial 00:03: disabled
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 708.264 msecs
PM: late suspend of devices complete after 15.759 msecs
r8169 0000:01:00.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.368 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 120
smpboot: CPU 1 is now offline
Broke affinity for irq 118
Broke affinity for irq 120
smpboot: CPU 2 is now offline
Broke affinity for irq 1
Broke affinity for irq 9
Broke affinity for irq 12
Broke affinity for irq 117
Broke affinity for irq 118
Broke affinity for irq 119
Broke affinity for irq 120
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:00: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 14.042 msecs
PM: early resume of devices complete after 76.436 msecs
r8169 0000:01:00.0: System wakeup disabled by ACPI
rtc_cmos 00:00: System wakeup disabled by ACPI
serial 00:03: activated
sd 0:0:0:0: [sda] Starting disk
r8169 0000:01:00.0 enp1s0: link down
ata2: SATA link down (SStatus 4 SControl 300)
usb 1-5.2.3: reset full-speed USB device number 42 using xhci_hcd
usb 1-5.2.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
usb 1-5.2.3.1: reset full-speed USB device number 43 using xhci_hcd
usb 1-5.2.3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
PM: resume of devices complete after 897.500 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
usb 1-5.2.3.2: new full-speed USB device number 50 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0052/input/input101
hid-generic 0003:046D:C246.0052: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.0053/input/input102
hid-generic 0003:046D:C246.0053: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
r8169 0000:01:00.0 enp1s0: link up
ata1: link is slow to respond, please be patient (ready=0)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
aufs au_opts_verify:1597:dockerd[25753]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25753]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[25753]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth64b782b entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth64b782b: link is not ready
eth0: renamed from veth7ffa2ea
IPv6: ADDRCONF(NETDEV_CHANGE): veth64b782b: link becomes ready
docker0: port 1(veth64b782b) entered forwarding state
docker0: port 1(veth64b782b) entered forwarding state
docker0: port 1(veth64b782b) entered forwarding state
docker0: port 1(veth64b782b) entered disabled state
veth7ffa2ea: renamed from eth0
docker0: port 1(veth64b782b) entered disabled state
device veth64b782b left promiscuous mode
docker0: port 1(veth64b782b) entered disabled state
aufs au_opts_verify:1597:dockerd[3102]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3309]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3309]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3309]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3309]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethf889fdf entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethf889fdf: link is not ready
eth0: renamed from vethfcdde57
IPv6: ADDRCONF(NETDEV_CHANGE): vethf889fdf: link becomes ready
docker0: port 1(vethf889fdf) entered forwarding state
docker0: port 1(vethf889fdf) entered forwarding state
docker0: port 1(vethf889fdf) entered forwarding state
docker0: port 1(vethf889fdf) entered disabled state
vethfcdde57: renamed from eth0
docker0: port 1(vethf889fdf) entered disabled state
device vethf889fdf left promiscuous mode
docker0: port 1(vethf889fdf) entered disabled state
aufs au_opts_verify:1597:dockerd[3321]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3481]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3481]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3481]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethca325f7 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethca325f7: link is not ready
eth0: renamed from veth9994409
IPv6: ADDRCONF(NETDEV_CHANGE): vethca325f7: link becomes ready
docker0: port 1(vethca325f7) entered forwarding state
docker0: port 1(vethca325f7) entered forwarding state
docker0: port 1(vethca325f7) entered forwarding state
docker0: port 1(vethca325f7) entered disabled state
veth9994409: renamed from eth0
docker0: port 1(vethca325f7) entered disabled state
device vethca325f7 left promiscuous mode
docker0: port 1(vethca325f7) entered disabled state
aufs au_opts_verify:1597:dockerd[3482]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3482]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3482]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3482]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3482]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3482]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3482]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3482]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3322]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3322]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[3482]: dirperm1 breaks the protection by the permission bits on the lower branch
device vethe542357 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethe542357: link is not ready
docker0: port 1(vethe542357) entered forwarding state
docker0: port 1(vethe542357) entered forwarding state
docker0: port 1(vethe542357) entered disabled state
eth0: renamed from vethf601383
IPv6: ADDRCONF(NETDEV_CHANGE): vethe542357: link becomes ready
docker0: port 1(vethe542357) entered forwarding state
docker0: port 1(vethe542357) entered forwarding state
docker0: port 1(vethe542357) entered disabled state
vethf601383: renamed from eth0
docker0: port 1(vethe542357) entered disabled state
device vethe542357 left promiscuous mode
docker0: port 1(vethe542357) entered disabled state
aufs au_opts_verify:1597:dockerd[5905]: dirperm1 breaks the protection by the permission bits on the lower branch
aufs au_opts_verify:1597:dockerd[5907]: dirperm1 breaks the protection by the permission bits on the lower branch
device veth0cc4930 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth0cc4930: link is not ready
eth0: renamed from veth81d48a4
IPv6: ADDRCONF(NETDEV_CHANGE): veth0cc4930: link becomes ready
docker0: port 1(veth0cc4930) entered forwarding state
docker0: port 1(veth0cc4930) entered forwarding state
usb 1-5.2.3.2: USB disconnect, device number 50
docker0: port 1(veth0cc4930) entered forwarding state
usb 1-5.2.3.2: new full-speed USB device number 51 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0054/input/input103
hid-generic 0003:046D:C246.0054: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.0055/input/input104
hid-generic 0003:046D:C246.0055: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3: USB disconnect, device number 42
usb 1-5.2.3.1: USB disconnect, device number 43
usb 1-5.2.3.2: USB disconnect, device number 51
usb 1-5.2.3: new full-speed USB device number 52 using xhci_hcd
usb 1-5.2.3: New USB device found, idVendor=0557, idProduct=8021
usb 1-5.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.2.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 1-5.2.3:1.0: USB hub found
hub 1-5.2.3:1.0: 4 ports detected
usb 1-5.2.3.1: new full-speed USB device number 53 using xhci_hcd
usb 1-5.2.3.1: New USB device found, idVendor=04b4, idProduct=0101
usb 1-5.2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.1: Product: SteelS쀁̄Љ̒DATA
usb 1-5.2.3.1: Manufacturer: DATACOMP
usb 1-5.2.3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.0/0003:04B4:0101.0056/input/input105
hid-generic 0003:04B4:0101.0056: input,hidraw0: USB HID v1.00 Keyboard [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input0
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.1/0003:04B4:0101.0057/input/input106
hid-generic 0003:04B4:0101.0057: input,hidraw1: USB HID v1.00 Device [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input1
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.2/0003:04B4:0101.0058/input/input107
hid-generic 0003:04B4:0101.0058: input,hidraw2: USB HID v1.10 Mouse [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input2
usb 1-5.2.3.2: new full-speed USB device number 54 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.0059/input/input108
hid-generic 0003:046D:C246.0059: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.005A/input/input109
hid-generic 0003:046D:C246.005A: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3: USB disconnect, device number 52
usb 1-5.2.3.1: USB disconnect, device number 53
usb 1-5.2.3.2: USB disconnect, device number 54
usb 1-5.2.3: new full-speed USB device number 55 using xhci_hcd
usb 1-5.2.3: New USB device found, idVendor=0557, idProduct=8021
usb 1-5.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.2.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 1-5.2.3:1.0: USB hub found
hub 1-5.2.3:1.0: 4 ports detected
usb 1-5.2.3.1: new full-speed USB device number 56 using xhci_hcd
usb 1-5.2.3.1: New USB device found, idVendor=04b4, idProduct=0101
usb 1-5.2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.1: Product: SteelS쀁̄Љ̒DATA
usb 1-5.2.3.1: Manufacturer: DATACOMP
usb 1-5.2.3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.0/0003:04B4:0101.005B/input/input110
hid-generic 0003:04B4:0101.005B: input,hidraw0: USB HID v1.00 Keyboard [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input0
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.1/0003:04B4:0101.005C/input/input111
hid-generic 0003:04B4:0101.005C: input,hidraw1: USB HID v1.00 Device [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input1
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.2/0003:04B4:0101.005D/input/input112
hid-generic 0003:04B4:0101.005D: input,hidraw2: USB HID v1.10 Mouse [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input2
usb 1-5.2.3.2: new full-speed USB device number 57 using xhci_hcd
usb 1-5.2.3.2: New USB device found, idVendor=046d, idProduct=c246
usb 1-5.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.2: Product: G300s Optical Gaming Mouse
usb 1-5.2.3.2: Manufacturer: Logitech
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.0/0003:046D:C246.005E/input/input113
hid-generic 0003:046D:C246.005E: input,hidraw3: USB HID v1.10 Mouse [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input0
input: Logitech G300s Optical Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.2/1-5.2.3.2:1.1/0003:046D:C246.005F/input/input114
hid-generic 0003:046D:C246.005F: input,hiddev0,hidraw4: USB HID v1.10 Keyboard [Logitech G300s Optical Gaming Mouse] on usb-0000:00:14.0-5.2.3.2/input1
usb 1-5.2.3: USB disconnect, device number 55
usb 1-5.2.3.1: USB disconnect, device number 56
usb 1-5.2.3.2: USB disconnect, device number 57
usb 1-5.2.3: new full-speed USB device number 58 using xhci_hcd
usb 1-5.2.3: New USB device found, idVendor=0557, idProduct=8021
usb 1-5.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5.2.3: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
hub 1-5.2.3:1.0: USB hub found
hub 1-5.2.3:1.0: 4 ports detected
usb 1-5.2.3.1: new full-speed USB device number 59 using xhci_hcd
usb 1-5.2.3.1: New USB device found, idVendor=04b4, idProduct=0101
usb 1-5.2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5.2.3.1: Product: SteelS쀁̄Љ̒DATA
usb 1-5.2.3.1: Manufacturer: DATACOMP
usb 1-5.2.3.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-5.2.3.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.0/0003:04B4:0101.0060/input/input115
hid-generic 0003:04B4:0101.0060: input,hidraw0: USB HID v1.00 Keyboard [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input0
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.1/0003:04B4:0101.0061/input/input116
hid-generic 0003:04B4:0101.0061: input,hidraw1: USB HID v1.00 Device [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input1
input: DATACOMP SteelS쀁̄Љ̒DATA as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2.3/1-5.2.3.1/1-5.2.3.1:1.2/0003:04B4:0101.0062/input/input117
hid-generic 0003:04B4:0101.0062: input,hidraw2: USB HID v1.10 Mouse [DATACOMP SteelS쀁̄Љ̒DATA] on usb-0000:00:14.0-5.2.3.1/input2