dmesg - demo
microcode: microcode updated early to revision 0x24, date = 2016-04-29
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-514.21.2.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-11) (GCC) ) #1 SMP Tue Jun 20 12:24:47 UTC 2017
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
BIOS-e820: [mem 0x0000000010000000-0x000000001000afff] reserved
BIOS-e820: [mem 0x000000001000b000-0x00000000a069cfff] usable
BIOS-e820: [mem 0x00000000a069d000-0x00000000acdfefff] reserved
BIOS-e820: [mem 0x00000000acdff000-0x00000000acf7efff] ACPI NVS
BIOS-e820: [mem 0x00000000acf7f000-0x00000000acffefff] ACPI data
BIOS-e820: [mem 0x00000000acfff000-0x00000000afffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ff000fff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000024effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20DCA098CD/20DCA098CD, BIOS J5ET50WW (1.21 ) 11/20/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x24f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00B0000000 mask 7FF0000000 uncachable
2 base 00AE000000 mask 7FFE000000 uncachable
3 base 00AD000000 mask 7FFF000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xa069d max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x01fa2000, 0x01fa2fff] PGTABLE
BRK [0x01fa3000, 0x01fa3fff] PGTABLE
BRK [0x01fa4000, 0x01fa4fff] PGTABLE
BRK [0x01fa5000, 0x01fa5fff] PGTABLE
BRK [0x01fa6000, 0x01fa6fff] PGTABLE
BRK [0x01fa7000, 0x01fa7fff] PGTABLE
RAMDISK: [mem 0x343b8000-0x361d3fff]
ACPI: RSDP 00000000000f0120 00024 (v02 LENOVO)
ACPI: XSDT 00000000acffe1c0 000D4 (v01 LENOVO TP-J5 00001210 PTEC 00000002)
ACPI: FACP 00000000acff9000 0010C (v05 LENOVO TP-J5 00001210 PTEC 00000002)
ACPI: DSDT 00000000acfe3000 112E7 (v01 LENOVO TP-J5 00001210 INTL 20120711)
ACPI: FACS 00000000acf68000 00040
ACPI: ASF! 00000000acffd000 000A5 (v32 LENOVO TP-J5 00001210 PTEC 00000002)
ACPI: HPET 00000000acffc000 00038 (v01 LENOVO TP-J5 00001210 PTEC 00000002)
ACPI: ECDT 00000000acffb000 00052 (v01 LENOVO TP-J5 00001210 PTEC 00000002)
ACPI: APIC 00000000acff8000 00098 (v01 LENOVO TP-J5 00001210 PTEC 00000002)
ACPI: MCFG 00000000acff7000 0003C (v01 LENOVO TP-J5 00001210 PTEC 00000002)
ACPI: SSDT 00000000acff6000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
ACPI: SSDT 00000000acff5000 00486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
ACPI: SSDT 00000000acfe2000 00922 (v01 LENOVO SataAhci 00001000 INTL 20120711)
ACPI: SSDT 00000000acfe1000 0062A (v01 LENOVO Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 00000000acfe0000 00B74 (v02 LENOVO CpuSsdt 00003000 INTL 20120711)
ACPI: SSDT 00000000acfdf000 00369 (v02 LENOVO CtdpB 00001000 INTL 20120711)
ACPI: SSDT 00000000acfdd000 01477 (v01 LENOVO SaSsdt 00003000 INTL 20120711)
ACPI: SSDT 00000000acfdc000 00394 (v02 LENOVO CppcTabl 00001000 INTL 20120711)
ACPI: PCCT 00000000acfdb000 0006E (v05 LENOVO TP-J5 00001210 PTEC 00000002)
ACPI: SSDT 00000000acfda000 00AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711)
ACPI: UEFI 00000000acfd9000 00042 (v01 LENOVO TP-J5 00001210 PTEC 00000002)
ACPI: MSDM 00000000acf42000 00055 (v03 LENOVO TP-J5 00001210 PTEC 00000002)
ACPI: BATB 00000000acfd8000 00046 (v01 LENOVO TP-J5 00001210 PTEC 00000002)
ACPI: FPDT 00000000acfd7000 00064 (v01 LENOVO TP-J5 00001210 PTEC 00000002)
ACPI: UEFI 00000000acfd6000 002E2 (v01 LENOVO TP-J5 00001210 PTEC 00000002)
ACPI: DMAR 00000000acfd5000 000B0 (v01 LENOVO TP-J5 00001210 PTEC 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000024effffff]
Initmem setup node 0 [mem 0x00000000-0x24effffff]
NODE_DATA [mem 0x24efd8000-0x24effefff]
Reserving 161MB of memory at 672MB for crashkernel (System RAM: 7926MB)
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x24effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x0fffffff]
node 0: [mem 0x1000b000-0xa069cfff]
node 0: [mem 0x100000000-0x24effffff]
On node 0 totalpages: 2029102
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 10203 pages used for memmap
DMA32 zone: 652946 pages, LIFO batch:31
Normal zone: 21440 pages used for memmap
Normal zone: 1372160 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xae000000-0xafffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x10000000-0x1000afff]
PM: Registered nosave memory: [mem 0xa069d000-0xacdfefff]
PM: Registered nosave memory: [mem 0xacdff000-0xacf7efff]
PM: Registered nosave memory: [mem 0xacf7f000-0xacffefff]
PM: Registered nosave memory: [mem 0xacfff000-0xafffffff]
PM: Registered nosave memory: [mem 0xb0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xff000fff]
PM: Registered nosave memory: [mem 0xff001000-0xff9fffff]
PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
e820: [mem 0xb0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88024ec00000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1997374
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 4447540k/9682944k available (6768k kernel code, 1566536k absent, 408360k reserved, 4445k data, 1680k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=8.
NR_IRQS:327936 nr_irqs:760 0
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33030144 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2194.715 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.43 BogoMIPS (lpj=2194715)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 25817 entries in 101 pages
smpboot: Max logical packages: 4
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
DMAR: RMRR base: 0x000000ac6ed000 end: 0x000000ac703fff
DMAR: RMRR base: 0x000000ad800000 end: 0x000000afffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
IRQ remapping doesn't support X2APIC mode, disable x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz (fam: 06, model: 3d, stepping: 04)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3
Brought up 4 CPUs
smpboot: Total of 4 processors activated (17557.72 BogoMIPS)
node 0 initialised, 815127 pages in 16ms
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xacdff000-0xacf7efff] (1572864 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000acdc9918 00436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00436 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: SSDT 00000000acdca618 005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: SSDT 00000000acdc8d98 00119 (v02 PmRef ApCst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v02 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PUBS] (on)
ACPI: Power Resource [AMD3] (on)
ACPI: Power Resource [AMD2] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfebfffff window]
pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xe1330000-0xe1333fff 64bit]
pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xe1320000-0xe132ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xe1339000-0xe133901f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a3] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xe1300000-0xe131ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xe133e000-0xe133efff]
pci 0000:00:19.0: reg 0x18: [io 0x4080-0x409f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe1334000-0xe1337fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:9c9a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xe133d000-0xe133d3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x40a8-0x40af]
pci 0000:00:1f.2: reg 0x14: [io 0x40b4-0x40b7]
pci 0000:00:1f.2: reg 0x18: [io 0x40a0-0x40a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x40b0-0x40b3]
pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:1f.2: reg 0x24: [mem 0xe133c000-0xe133c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xe1338000-0xe13380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xe133b000-0xe133bfff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:04:00.0: [8086:08b4] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xe1200000-0xe1201fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xe1200000-0xe12fffff]
pci 0000:05:00.0: [1002:6664] type 00 class 0x038000
pci 0000:05:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:05:00.0: reg 0x18: [mem 0xe1100000-0xe113ffff 64bit]
pci 0000:05:00.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:05:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D1 D2 D3hot
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xe1100000-0xe11fffff]
pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:06:00.0: [10ec:5227] type 00 class 0xff0000
pci 0000:06:00.0: reg 0x10: [mem 0xe1000000-0xe1000fff]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [mem 0xe1000000-0xe10fffff]
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI: EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xa069d000-0xa3ffffff]
e820: reserve RAM buffer [mem 0x24f000000-0x24fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xafffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x1800-0x189f] could not be reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0980-0x09ff] has been reserved
system 00:01: [io 0x0a00-0x0a7f] has been reserved
system 00:01: [io 0x0a80-0x0aff] has been reserved
system 00:01: [io 0x0b00-0x0b7f] has been reserved
system 00:01: [io 0x0b80-0x0bff] has been reserved
system 00:01: [io 0x1640-0x165f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN200c PNP0f13 (active)
system 00:05: [mem 0xb0010000-0xb001ffff] has been reserved
system 00:05: [mem 0xb0000000-0xb000ffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
ACPI: bus type PNP unregistered
pci 0000:05:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xe1200000-0xe12fffff]
pci 0000:05:00.0: BAR 6: assigned [mem 0xe1140000-0xe115ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xe1100000-0xe11fffff]
pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [mem 0xe1000000-0xe10fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfebfffff window]
pci_bus 0000:04: resource 1 [mem 0xe1200000-0xe12fffff]
pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:05: resource 1 [mem 0xe1100000-0xe11fffff]
pci_bus 0000:05: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xe1000000-0xe10fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 30832k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9c69d000-0xa069d000] (64MB) mapped at [ffff88009c69d000-ffff8800a069cfff]
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff]
caller snb_uncore_imc_init_box+0x6c/0xb0 mapping multiple BARs
sha1_ssse3: Using AVX2 optimized SHA-1 implementation
sha256_ssse3: Using AVX2 optimized SHA-256 implementation
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1498101070.663:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15115
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x3D
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (47 C)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xe133d000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-514.21.2.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-514.21.2.el7.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 11 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.10.0-514.21.2.el7.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x24
microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x24
microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x24
microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x24
microcode: Microcode Update Driver: v2.01 , Peter Oruba
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: c2fec5c406d849ce0f85e34b1ac5f37c4f4b4bba'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:02: setting system clock to 2017-06-22 03:11:11 UTC (1498101071)
ACPI: Battery Slot [BAT0] (battery present)
Freeing unused kernel memory: 1680k freed
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
[drm] Initialized drm 1.1.0 20060810
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
libata version 3.00 loaded.
rtsx_pci 0000:06:00.0: irq 44 for MSI/MSI-X
rtsx_pci 0000:06:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 44
[drm] radeon kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.VID_.ATPX handle
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
[drm] initializing kernel modesetting (HAINAN 0x1002:0x6664 0x17AA:0x5021 0x00).
[drm] register mmio base: 0xE1100000
[drm] register mmio size: 262144
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-7: new full-speed USB device number 2 using xhci_hcd
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 50:7b:9d:ad:ff:40
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
usb 1-1: New USB device found, idVendor=8087, idProduct=8001
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
tsc: Refined TSC clocksource calibration: 2194.918 MHz
Switched to clocksource tsc
input: DualPoint Stick as /devices/platform/i8042/serio1/input/input3
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input4
ACPI Error: Field [TBF3] at 294912 exceeds Buffer [NULL] size 262144 (bits) (20130517/dsopcode-236)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VID_.GETB] (Node ffff88017cc435c8), AE_AML_BUFFER_LIMIT (20130517/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VID_.ATRM] (Node ffff88017cc435a0), AE_AML_BUFFER_LIMIT (20130517/psparse-536)
failed to evaluate ATRM got AE_AML_BUFFER_LIMIT
ATOM BIOS: Lenovo/LCFC
[drm] GPU not posted. posting now...
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m2048@0xe133c000 port 0xe133c100 irq 45
ata2: DUMMY
ata3: DUMMY
usb 2-7: New USB device found, idVendor=8087, idProduct=07dc
usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
radeon 0000:05:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:05:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 3870294 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading hainan Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:9c98 = 5323c42/0
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 8086:9c98 = 5323c42/0
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:05:00.0: WB enabled
radeon 0000:05:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88023f818c00
radeon 0000:05:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88023f818c04
radeon 0000:05:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88023f818c08
radeon 0000:05:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88023f818c0c
radeon 0000:05:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88023f818c10
radeon 0000:05:00.0: VCE init error (-22).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:05:00.0: radeon: MSI limited to 32-bit
radeon 0000:05:00.0: irq 46 for MSI/MSI-X
radeon 0000:05:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Initialized radeon 2.43.0 20080528 for 0000:05:00.0 on minor 0
[drm] Memory usable by graphics device = 4096M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 47 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vga_switcheroo: enabled
ATPX version 1, functions 0x00000033
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 2-8: new high-speed USB device number 3 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ATA-8: ST500LM021-1KJ152, 0003LIM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
usb 2-8: New USB device found, idVendor=04f2, idProduct=b444
usb 2-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 2-8: Product: Integrated Camera
usb 2-8: Manufacturer: Chicony Electronics Co.,Ltd.
usb 2-8: SerialNumber: 0001
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST500LM021-1KJ15 LIM1 PQ: 0 ANSI: 5
fbcon: inteldrmfb (fb0) is primary device
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input6
[drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 1
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
SGI XFS with ACLs, security attributes, no debug enabled
XFS (sda2): Mounting V4 Filesystem
XFS (sda2): Ending clean mount
systemd-journald[107]: Received SIGTERM from PID 1 (systemd).
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1498101075.977:2): selinux=0 auid=4294967295 ses=4294967295
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
systemd-journald[399]: Received request to flush runtime journal from PID 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
sd 0:0:0:0: Attached scsi generic sg0 type 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS J5ET50WW (1.21 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad E450, model 20DCA098CD
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
input: PC Speaker as /devices/platform/pcspkr/input/input8
[drm] probing gen 2 caps for device 8086:9c98 = 5323c42/0
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:05:00.0: WB enabled
radeon 0000:05:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88023f818c00
radeon 0000:05:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88023f818c04
radeon 0000:05:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88023f818c08
radeon 0000:05:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88023f818c0c
radeon 0000:05:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88023f818c10
radeon 0000:05:00.0: VCE init error (-22).
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:04:00.0: irq 49 for MSI/MSI-X
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
Linux video capture interface: v2.00
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b444)
input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 51 for MSI/MSI-X
snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC1D0: inputs:
snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a
snd_hda_codec_conexant hdaudioC1D0: Mic=0x19
snd_hda_codec_conexant hdaudioC1D0: Enable sync_write for stable communication
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
Adding 8388604k swap on /dev/sda1. Priority:-1 extents:1 across:8388604k FS
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
alg: No test for crc32 (crc32-pclmul)
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 3707100100012d0d26
Bluetooth: hci0: Intel device is already patched. patch num: 26
iwlwifi 0000:04:00.0: loaded firmware version 17.352738.0 op_mode iwlmvm
iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 3160, REV=0x164
iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:04:00.0: L1 Enabled - LTR Enabled
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
type=1305 audit(1498101087.141:3): audit_pid=777 old=0 auid=4294967295 ses=4294967295 res=1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[drm] probing gen 2 caps for device 8086:9c98 = 5323c42/0
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:05:00.0: WB enabled
radeon 0000:05:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88023f818c00
radeon 0000:05:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88023f818c04
radeon 0000:05:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88023f818c08
radeon 0000:05:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88023f818c0c
radeon 0000:05:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88023f818c10
radeon 0000:05:00.0: VCE init error (-22).
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
fuse init (API version 7.22)
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device virbr0-nic entered promiscuous mode
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered listening state
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
virbr0: port 1(virbr0-nic) entered disabled state
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
systemd-readahead[406]: open(/var/tmp/dracut.yEPuzg/initramfs/usr/bin/loginctl) failed: Too many levels of symbolic links
systemd-readahead[406]: open(/var/tmp/dracut.yEPuzg/initramfs/usr/lib/systemd/system/dracut-emergency.service) failed: Too many levels of symbolic links
perf: interrupt took too long (2560 > 2500), lowering kernel.perf_event_max_sample_rate to 78000
e1000e: enp0s25 NIC Link is Down
e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
perf: interrupt took too long (3218 > 3200), lowering kernel.perf_event_max_sample_rate to 62000
perf: interrupt took too long (4047 > 4022), lowering kernel.perf_event_max_sample_rate to 49000
TCP: lp registered
device vnet0 entered promiscuous mode
virbr0: port 2(vnet0) entered listening state
virbr0: port 2(vnet0) entered listening state
virbr0: port 2(vnet0) entered learning state
virbr0: topology change detected, propagating
virbr0: port 2(vnet0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): virbr0: link becomes ready
kvm: zapping shadow pages for mmio generation wraparound
kvm [30986]: vcpu0 unhandled rdmsr: 0x611
kvm [30986]: vcpu0 unhandled rdmsr: 0x639
kvm [30986]: vcpu0 unhandled rdmsr: 0x641
kvm [30986]: vcpu0 unhandled rdmsr: 0x619
perf: interrupt took too long (5072 > 5058), lowering kernel.perf_event_max_sample_rate to 39000
perf: interrupt took too long (6371 > 6340), lowering kernel.perf_event_max_sample_rate to 31000
perf: interrupt took too long (7968 > 7963), lowering kernel.perf_event_max_sample_rate to 25000
perf: interrupt took too long (9987 > 9960), lowering kernel.perf_event_max_sample_rate to 20000