dmesg - 1

Return To 1 System Information

Linux version 4.10.0-24-generic (buildd@lcy01-09) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #28-Ubuntu SMP Wed Jun 14 08:14:34 UTC 2017 (Ubuntu 4.10.0-24.28-generic 4.10.15)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000078cfafff] usable
BIOS-e820: [mem 0x0000000078cfb000-0x0000000078cfbfff] ACPI NVS
BIOS-e820: [mem 0x0000000078cfc000-0x0000000078d25fff] reserved
BIOS-e820: [mem 0x0000000078d26000-0x0000000078d79fff] usable
BIOS-e820: [mem 0x0000000078d7a000-0x0000000079a9afff] reserved
BIOS-e820: [mem 0x0000000079a9b000-0x00000000868c2fff] usable
BIOS-e820: [mem 0x00000000868c3000-0x0000000086919fff] type 20
BIOS-e820: [mem 0x000000008691a000-0x00000000877affff] reserved
BIOS-e820: [mem 0x00000000877b0000-0x0000000087f99fff] ACPI NVS
BIOS-e820: [mem 0x0000000087f9a000-0x0000000087ffefff] ACPI data
BIOS-e820: [mem 0x0000000087fff000-0x0000000087ffffff] usable
BIOS-e820: [mem 0x0000000088000000-0x00000000880fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000010767fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi:  ACPI=0x87f2d000  ACPI 2.0=0x87f2d000  SMBIOS=0xf05e0  MPS=0xfc4b0 
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z170 Extreme7+, BIOS P7.30 11/18/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1076800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 00C0000000 mask 7FC0000000 uncachable
  1 base 00A0000000 mask 7FE0000000 uncachable
  2 base 0090000000 mask 7FF0000000 uncachable
  3 base 008C000000 mask 7FFC000000 uncachable
  4 base 008A000000 mask 7FFE000000 uncachable
  5 base 0089000000 mask 7FFF000000 uncachable
  6 base 0088800000 mask 7FFF800000 uncachable
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: last_pfn = 0x88000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fc890-0x000fc89f] mapped at [ffff9b3d000fc890]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9b3d00096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x470628000, 0x470628fff] PGTABLE
BRK [0x470629000, 0x470629fff] PGTABLE
BRK [0x47062a000, 0x47062afff] PGTABLE
BRK [0x47062b000, 0x47062bfff] PGTABLE
BRK [0x47062c000, 0x47062cfff] PGTABLE
BRK [0x47062d000, 0x47062dfff] PGTABLE
BRK [0x47062e000, 0x47062efff] PGTABLE
BRK [0x47062f000, 0x47062ffff] PGTABLE
BRK [0x470630000, 0x470630fff] PGTABLE
BRK [0x470631000, 0x470631fff] PGTABLE
BRK [0x470632000, 0x470632fff] PGTABLE
RAMDISK: [mem 0x32147000-0x3509afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000087F2D000 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000087F2D0A0 0000BC (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x0000000087F50388 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x0000000087F2D1F0 023191 (v02 ALASKA A M I    01072009 INTL 20120913)
ACPI: FACS 0x0000000087F99F80 000040
ACPI: APIC 0x0000000087F50498 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x0000000087F50520 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x0000000087F50568 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x0000000087F50608 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: HPET 0x0000000087F50648 000038 (v01 ALASKA A M I    01072009 AMI. 0005000B)
ACPI: SSDT 0x0000000087F50680 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x0000000087F509F0 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000087F50A88 00002B (v02 INTEL  UsbCTabl 00001000 INTL 20120913)
ACPI: DBGP 0x0000000087F50AB8 000034 (v01 INTEL           00000000 MSFT 0000005F)
ACPI: DBG2 0x0000000087F50AF0 000054 (v00 INTEL           00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000087F50B48 000614 (v02 INTEL  xh_rvp08 00000000 INTL 20120913)
ACPI: AAFT 0x0000000087F51160 000557 (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
ACPI: SSDT 0x0000000087F516B8 005212 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
ACPI: UEFI 0x0000000087F568D0 000042 (v01                 00000000      00000000)
ACPI: SSDT 0x0000000087F56918 000E58 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
ACPI: BGRT 0x0000000087F57770 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: DMAR 0x0000000087F577A8 000070 (v01 INTEL  SKL      00000001 INTL 00000001)
ACPI: ASF! 0x0000000087F57818 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000010767fffff]
NODE_DATA(0) allocated [mem 0x10767d5000-0x10767fffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x00000010767fffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x0000000000057fff]
  node   0: [mem 0x0000000000059000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x0000000078cfafff]
  node   0: [mem 0x0000000078d26000-0x0000000078d79fff]
  node   0: [mem 0x0000000079a9b000-0x00000000868c2fff]
  node   0: [mem 0x0000000087fff000-0x0000000087ffffff]
  node   0: [mem 0x0000000100000000-0x00000010767fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000010767fffff]
On node 0 totalpages: 16761621
  DMA zone: 64 pages used for memmap
  DMA zone: 26 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 8494 pages used for memmap
  DMA32 zone: 543608 pages, LIFO batch:31
  Normal zone: 253344 pages used for memmap
  Normal zone: 16214016 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x78cfb000-0x78cfbfff]
PM: Registered nosave memory: [mem 0x78cfc000-0x78d25fff]
PM: Registered nosave memory: [mem 0x78d7a000-0x79a9afff]
PM: Registered nosave memory: [mem 0x868c3000-0x86919fff]
PM: Registered nosave memory: [mem 0x8691a000-0x877affff]
PM: Registered nosave memory: [mem 0x877b0000-0x87f99fff]
PM: Registered nosave memory: [mem 0x87f9a000-0x87ffefff]
PM: Registered nosave memory: [mem 0x88000000-0x880fffff]
PM: Registered nosave memory: [mem 0x88100000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x88100000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff9b4d76400000 s107992 r8192 d31272 u524288
pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 16499693
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 65635976K/67046484K available (9082K kernel code, 1666K rwdata, 3816K rodata, 2228K init, 2364K bss, 1410508K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:524544 nr_irqs:1024 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 3500.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7008.00 BogoMIPS (lpj=14016000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20160930/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160930/psobject-227)
ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20160930/tbxfload-228)
ACPI Error: 1 table load failures, 5 successful (20160930/tbxfload-246)
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K
ftrace: allocating 34180 entries in 134 pages
smpboot: Max logical packages: 1
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x00000087552000 end: 0x00000087571fff
DMAR-IR: IOAPIC id 2 under DRHD base  0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version:                4
... bit width:              48
... generic registers:      8
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (28032.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x78cfb000-0x78cfbfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x877b0000-0x87f99fff] (8298496 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 17:20:13, date: 06/21/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 21 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9B4D2F335000 000705 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9B4D2ED8B400 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9B4D2EC16000 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9B4D2ED02C00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x89800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf630000-0xdf63ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf64e000-0xdf64efff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf64d000-0xdf64dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf648000-0xdf649fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf64c000-0xdf64c0ff]
pci 0000:00:17.0: reg 0x18: [io  0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io  0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf64b000-0xdf64b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.4: [8086:a11c] type 01 class 0x060400
pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.4: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf644000-0xdf647fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf640000-0xdf643fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf620000-0xdf62ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf64a000-0xdf64a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdf600000-0xdf61ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:01:00.0: [10de:1c03] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:10f1] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:1187] type 01 class 0x060400
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03-09]
pci 0000:00:1c.2:   bridge window [io  0xa000-0xcfff]
pci 0000:00:1c.2:   bridge window [mem 0xdf100000-0xdf3fffff]
pci 0000:04:01.0: [1b21:1187] type 01 class 0x060400
pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
pci 0000:04:04.0: [1b21:1187] type 01 class 0x060400
pci 0000:04:04.0: PME# supported from D0 D3hot D3cold
pci 0000:04:05.0: [1b21:1187] type 01 class 0x060400
pci 0000:04:05.0: PME# supported from D0 D3hot D3cold
pci 0000:04:06.0: [1b21:1187] type 01 class 0x060400
pci 0000:04:06.0: PME# supported from D0 D3hot D3cold
pci 0000:04:07.0: [1b21:1187] type 01 class 0x060400
pci 0000:04:07.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04-09]
pci 0000:03:00.0:   bridge window [io  0xa000-0xcfff]
pci 0000:03:00.0:   bridge window [mem 0xdf100000-0xdf3fffff]
pci 0000:05:00.0: [8086:1539] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xdf300000-0xdf31ffff]
pci 0000:05:00.0: reg 0x18: [io  0xc000-0xc01f]
pci 0000:05:00.0: reg 0x1c: [mem 0xdf320000-0xdf323fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:01.0: PCI bridge to [bus 05]
pci 0000:04:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:04:01.0:   bridge window [mem 0xdf300000-0xdf3fffff]
pci 0000:04:04.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:07:00.0: reg 0x10: [io  0xb050-0xb057]
pci 0000:07:00.0: reg 0x14: [io  0xb040-0xb043]
pci 0000:07:00.0: reg 0x18: [io  0xb030-0xb037]
pci 0000:07:00.0: reg 0x1c: [io  0xb020-0xb023]
pci 0000:07:00.0: reg 0x20: [io  0xb000-0xb01f]
pci 0000:07:00.0: reg 0x24: [mem 0xdf200000-0xdf2001ff]
pci 0000:04:05.0: PCI bridge to [bus 07]
pci 0000:04:05.0:   bridge window [io  0xb000-0xbfff]
pci 0000:04:05.0:   bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:08:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:08:00.0: reg 0x10: [io  0xa050-0xa057]
pci 0000:08:00.0: reg 0x14: [io  0xa040-0xa043]
pci 0000:08:00.0: reg 0x18: [io  0xa030-0xa037]
pci 0000:08:00.0: reg 0x1c: [io  0xa020-0xa023]
pci 0000:08:00.0: reg 0x20: [io  0xa000-0xa01f]
pci 0000:08:00.0: reg 0x24: [mem 0xdf100000-0xdf1001ff]
pci 0000:04:06.0: PCI bridge to [bus 08]
pci 0000:04:06.0:   bridge window [io  0xa000-0xafff]
pci 0000:04:06.0:   bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:04:07.0: PCI bridge to [bus 09]
pci 0000:0a:00.0: [144d:a802] type 00 class 0x010802
pci 0000:0a:00.0: reg 0x10: [mem 0xdf510000-0xdf513fff 64bit]
pci 0000:0a:00.0: reg 0x18: [io  0xd000-0xd0ff]
pci 0000:0a:00.0: reg 0x30: [mem 0xdf500000-0xdf50ffff pref]
pci 0000:0a:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: PCI bridge to [bus 0a]
pci 0000:00:1d.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1d.0:   bridge window [mem 0xdf500000-0xdf5fffff]
pci 0000:0b:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:0b:00.0: reg 0x10: [mem 0xdf400000-0xdf407fff 64bit]
pci 0000:0b:00.0: PME# supported from D3cold
pci 0000:0b:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.4: PCI bridge to [bus 0b]
pci 0000:00:1d.4:   bridge window [mem 0xdf400000-0xdf4fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x78cfb000-0x7bffffff]
e820: reserve RAM buffer [mem 0x78d7a000-0x7bffffff]
e820: reserve RAM buffer [mem 0x868c3000-0x87ffffff]
e820: reserve RAM buffer [mem 0x1076800000-0x1077ffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io  0x0280-0x028f] has been reserved
system 00:00: [io  0x0290-0x029f] has been reserved
system 00:00: [io  0x02a0-0x02af] has been reserved
system 00:00: [io  0x02b0-0x02bf] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io  0x0680-0x069f] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0x1800-0x18fe] has been reserved
system 00:01: [io  0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0800-0x087f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io  0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io  0xff00-0xfffe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:04:01.0: PCI bridge to [bus 05]
pci 0000:04:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:04:01.0:   bridge window [mem 0xdf300000-0xdf3fffff]
pci 0000:04:04.0: PCI bridge to [bus 06]
pci 0000:04:05.0: PCI bridge to [bus 07]
pci 0000:04:05.0:   bridge window [io  0xb000-0xbfff]
pci 0000:04:05.0:   bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:04:06.0: PCI bridge to [bus 08]
pci 0000:04:06.0:   bridge window [io  0xa000-0xafff]
pci 0000:04:06.0:   bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:04:07.0: PCI bridge to [bus 09]
pci 0000:03:00.0: PCI bridge to [bus 04-09]
pci 0000:03:00.0:   bridge window [io  0xa000-0xcfff]
pci 0000:03:00.0:   bridge window [mem 0xdf100000-0xdf3fffff]
pci 0000:00:1c.2: PCI bridge to [bus 03-09]
pci 0000:00:1c.2:   bridge window [io  0xa000-0xcfff]
pci 0000:00:1c.2:   bridge window [mem 0xdf100000-0xdf3fffff]
pci 0000:00:1d.0: PCI bridge to [bus 0a]
pci 0000:00:1d.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1d.0:   bridge window [mem 0xdf500000-0xdf5fffff]
pci 0000:00:1d.4: PCI bridge to [bus 0b]
pci 0000:00:1d.4:   bridge window [mem 0xdf400000-0xdf4fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x89800000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xa000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf3fffff]
pci_bus 0000:04: resource 0 [io  0xa000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf3fffff]
pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xdf300000-0xdf3fffff]
pci_bus 0000:07: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:07: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:08: resource 0 [io  0xa000-0xafff]
pci_bus 0000:08: resource 1 [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:0a: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:0a: resource 1 [mem 0xdf500000-0xdf5fffff]
pci_bus 0000:0b: resource 1 [mem 0xdf400000-0xdf4fffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 48464K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x73da2000-0x77da2000] (64MB) mapped at [ffff9b3d73da2000-ffff9b3d77da1fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3282142a9b0, max_idle_ns: 440795384778 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1498065613.744:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=24 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: Signaling PME with IRQ 121
pcieport 0000:00:1c.0: Signaling PME with IRQ 122
pcieport 0000:00:1c.2: Signaling PME with IRQ 123
pcieport 0000:00:1d.0: Signaling PME with IRQ 124
pcieport 0000:00:1d.4: Signaling PME with IRQ 125
efifb: probing for efifb
efifb: framebuffer at 0xd1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-24-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-24-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
xhci_hcd 0000:0b:00.0: xHCI Host Controller
xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:0b:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.10.0-24-generic xhci-hcd
usb usb3: SerialNumber: 0000:0b:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:0b:00.0: xHCI Host Controller
xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.10.0-24-generic xhci-hcd
usb usb4: SerialNumber: 0000:0b:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x506e3, pf=0x2, revision=0x74
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 27eede362a4e5dd307bee293ea5b775d0ffac6f6'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
  Magic number: 5:652:340
usb usb1-port11: hash matches
rtc_cmos 00:03: setting system clock to 2017-06-21 17:20:13 UTC (1498065613)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2228K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1144K
Freeing unused kernel memory: 280K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ahci 0000:00:17.0: version 3.0
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvme nvme0: pci function 0000:0a:00.0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
nvidia-nvlink: Nvlink Core is being initialized, major device number 244
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  381.22  Thu May  4 00:55:03 PDT 2017 (using threaded interrupts)
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[drm] Initialized
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x30 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  381.22  Thu May  4 00:21:48 PDT 2017
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xdf64b000 port 0xdf64b300 irq 138
ata6: SATA max UDMA/133 abar m2048@0xdf64b000 port 0xdf64b380 irq 138
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ahci 0000:07:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:07:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xdf200000 port 0xdf200100 irq 145
ata8: SATA max UDMA/133 abar m512@0xdf200000 port 0xdf200180 irq 145
ahci 0000:08:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:08:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
scsi host8: ahci
scsi host9: ahci
ata9: SATA max UDMA/133 abar m512@0xdf100000 port 0xdf100100 irq 147
ata10: SATA max UDMA/133 abar m512@0xdf100000 port 0xdf100180 irq 147
pps pps0: new PPS source ptp0
igb 0000:05:00.0: added PHC on eth0
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) d0:50:99:85:e2:9d
igb 0000:05:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:05:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:05:00.0 enp5s0: renamed from eth0
 nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8
usb 1-3: new low-speed USB device number 2 using xhci_hcd
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata5.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB00, max UDMA/100
ata5.00: configured for UDMA/100
usb 1-3: New USB device found, idVendor=0510, idProduct=0032
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3: Product: SEJIN USB joint Keyboard
usb 1-3: Manufacturer: SEJIN
scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223Q  SB00 PQ: 0 ANSI: 5
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:85:e2:9f
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
ata7: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: SEJIN SEJIN USB joint Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:0510:0032.0001/input/input3
sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg0 type 5
hid-generic 0003:0510:0032.0001: input,hidraw0: USB HID v1.10 Keyboard [SEJIN SEJIN USB joint Keyboard] on usb-0000:00:14.0-3/input0
usb 2-5: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-5: New USB device found, idVendor=174c, idProduct=3074
usb 2-5: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 2-5: Product: ASM107x
usb 2-5: Manufacturer: ASRock
hub 2-5:1.0: USB hub found
hub 2-5:1.0: 4 ports detected
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133
ata9.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata9.00: configured for UDMA/133
usb 1-4: new low-speed USB device number 3 using xhci_hcd
usb 1-4: New USB device found, idVendor=1bcf, idProduct=0005
usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-4: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:1BCF:0005.0002/input/input4
hid-generic 0003:1BCF:0005.0002: input,hidraw1: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-4/input0
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
random: fast init done
ata8.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
ata8.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M AB51 PQ: 0 ANSI: 5
clocksource: Switched to clocksource tsc
usb 1-5: new high-speed USB device number 4 using xhci_hcd
sd 7:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 7:0:0:0: Attached scsi generic sg1 type 0
sd 7:0:0:0: [sda] Write Protect is off
sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 8:0:0:0: Direct-Access     ATA      ST4000VN008-2DR1 SC60 PQ: 0 ANSI: 5
 sda: sda1 sda2 sda3
sd 7:0:0:0: [sda] Attached SCSI disk
sd 8:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 8:0:0:0: [sdb] 4096-byte physical blocks
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 8:0:0:0: Attached scsi generic sg2 type 0
 sdb: sdb1 sdb2 sdb3 sdb4
sd 8:0:0:0: [sdb] Attached SCSI disk
usb 1-5: New USB device found, idVendor=174c, idProduct=2074
usb 1-5: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 1-5: Product: ASM107x
usb 1-5: Manufacturer: ASRock
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
usb 1-6: new full-speed USB device number 5 using xhci_hcd
usb 1-6: New USB device found, idVendor=0a5c, idProduct=21e8
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: BCM20702A0
usb 1-6: Manufacturer: Broadcom Corp
usb 1-6: SerialNumber: 5CF37074703C
ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata10.00: ATA-10: ST4000VN008-2DR166, SC60, max UDMA/133
ata10.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata10.00: configured for UDMA/133
scsi 9:0:0:0: Direct-Access     ATA      ST4000VN008-2DR1 SC60 PQ: 0 ANSI: 5
sd 9:0:0:0: Attached scsi generic sg3 type 0
sd 9:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 9:0:0:0: [sdc] 4096-byte physical blocks
sd 9:0:0:0: [sdc] Write Protect is off
sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1 sdc2 sdc3 sdc4
sd 9:0:0:0: [sdc] Attached SCSI disk
EXT4-fs (nvme0n1p7): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: crng init done
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Created slice User and Session Slice.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (nvme0n1p7): re-mounted. Opts: errors=remount-ro
systemd-journald[268]: Received request to flush runtime journal from PID 1
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
wmi: Mapper loaded
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 239
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
usbcore: registered new interface driver btusb
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
Bluetooth: hci0: BCM: chip id 63
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
Bluetooth: hci0: netspio
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e8.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e8.hcd not found
raid6: sse2x1   gen() 13850 MB/s
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
raid6: sse2x1   xor() 10192 MB/s
raid6: sse2x2   gen() 16972 MB/s
raid6: sse2x2   xor() 11830 MB/s
raid6: sse2x4   gen() 18606 MB/s
raid6: sse2x4   xor() 13007 MB/s
raid6: avx2x1   gen() 26771 MB/s
raid6: avx2x1   xor() 18945 MB/s
raid6: avx2x2   gen() 31052 MB/s
raid6: avx2x2   xor() 21867 MB/s
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
raid6: avx2x4   gen() 34049 MB/s
raid6: avx2x4   xor() 25419 MB/s
raid6: using algorithm avx2x4 gen() 34049 MB/s
raid6: .... xor() 25419 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function   avx       
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device label personal devid 2 transid 4252 /dev/sdb1
BTRFS: device label personal devid 1 transid 4252 /dev/sdc1
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
Adding 1023996k swap on /dev/nvme0n1p3.  Priority:-1 extents:1 across:1023996k SSFS
audit: type=1400 audit(1498065616.660:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=863 comm="apparmor_parser"
audit: type=1400 audit(1498065616.660:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=863 comm="apparmor_parser"
audit: type=1400 audit(1498065616.660:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=860 comm="apparmor_parser"
audit: type=1400 audit(1498065616.660:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=860 comm="apparmor_parser"
audit: type=1400 audit(1498065616.660:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=860 comm="apparmor_parser"
audit: type=1400 audit(1498065616.660:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=860 comm="apparmor_parser"
audit: type=1400 audit(1498065616.664:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=864 comm="apparmor_parser"
audit: type=1400 audit(1498065616.664:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=865 comm="apparmor_parser"
audit: type=1400 audit(1498065616.664:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=865 comm="apparmor_parser"
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
nvidia-modeset: Allocated GPU:0 (GPU-bd64060d-007b-85ea-51c9-167552cb345a) @ PCI:0000:01:00.0
igb 0000:05:00.0 enp5s0: igb: enp5s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 2
EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
BTRFS info (device sdc1): disk space caching is enabled
BTRFS info (device sdc1): has skinny extents
NVRM: GPU at PCI:0000:01:00: GPU-bd64060d-007b-85ea-51c9-167552cb345a
NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 3): Out Of Range Address
NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 0, TPC 3): Physical Multiple Warp Errors
NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x505e48=0x24000e 0x505e50=0x24 0x505e44=0xd3eff2 0x505e4c=0x17f
NVRM: Xid (PCI:0000:01:00): 43, Ch 00000030, engmask 00000101
NVRM: Xid (PCI:0000:01:00): 13, NVRM: Graphics TEX Exception on (GPC 0, TPC 3):     TEX NACK / Page Fault
NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x505a24=0x80000041 0x505a28=0x100001 0x505a2c=0x0 0x505a34=0x1fc0
NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x505a24=0x80000000 0x505a28=0x0 0x505a2c=0x0 0x505a34=0x0
NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Warp Exception on (GPC 0, TPC 3): Out Of Range Address
NVRM: Xid (PCI:0000:01:00): 13, Graphics SM Global Exception on (GPC 0, TPC 3): Physical Multiple Warp Errors
NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ESR 0x505e48=0x106000e 0x505e50=0x4 0x505e44=0xd3eff2 0x505e4c=0x17f
NVRM: Xid (PCI:0000:01:00): 31, Ch 00000031, engmask 00000101, intr 10000000

Return To 1 System Information