dmesg - Lamborghini_7zip

Return To Lamborghini_7zip System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-58-generic (buildd@lcy01-12) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #79-Ubuntu SMP Tue Dec 20 12:12:35 UTC 2016 (Ubuntu 4.4.0-58.79-generic 4.4.35)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000af65ffff] usable
BIOS-e820: [mem 0x00000000af660000-0x00000000af66dfff] ACPI data
BIOS-e820: [mem 0x00000000af66e000-0x00000000af6affff] ACPI NVS
BIOS-e820: [mem 0x00000000af6b0000-0x00000000af6bffff] reserved
BIOS-e820: [mem 0x00000000af6c0000-0x00000000af6dffff] ACPI NVS
BIOS-e820: [mem 0x00000000af6e0000-0x00000000af6fffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000010fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: ASUSTeK Computer INC. VX6/VX6, BIOS 0901    04/25/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x110000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 100000000 mask FF0000000 write-back
  2 base 0B0000000 mask FF0000000 uncachable
  3 base 0C0000000 mask FC0000000 uncachable
  4 base 0AF700000 mask FFFF00000 uncachable
  5 base 0AF800000 mask FFF800000 uncachable
  6 disabled
  7 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 256MB, type WB
reg 2, base: 2816MB, range: 256MB, type UC
reg 3, base: 3GB, range: 1GB, type UC
reg 4, base: 2807MB, range: 1MB, type UC
reg 5, base: 2808MB, range: 8MB, type UC
total RAM covered: 3063M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 16M 	num_reg: 6  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2560MB, range: 256MB, type WB
reg 3, base: 2807MB, range: 1MB, type UC
reg 4, base: 2808MB, range: 8MB, type UC
reg 5, base: 4GB, range: 256MB, type WB
e820: update [mem 0xaf700000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xaf660 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
BRK [0x0220b000, 0x0220bfff] PGTABLE
BRK [0x0220c000, 0x0220cfff] PGTABLE
BRK [0x0220d000, 0x0220dfff] PGTABLE
BRK [0x0220e000, 0x0220efff] PGTABLE
BRK [0x0220f000, 0x0220ffff] PGTABLE
BRK [0x02210000, 0x02210fff] PGTABLE
RAMDISK: [mem 0x338b4000-0x35c51fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FBF30 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000AF660100 00006C (v01 _ASUS_ Notebook 04001125 MSFT 00000097)
ACPI: FACP 0x00000000AF660290 0000F4 (v04 A_M_I_ OEMFACP  04001125 MSFT 00000097)
ACPI: DSDT 0x00000000AF6604A0 0099DF (v02 A1660  A1660000 00000000 INTL 20060113)
ACPI: FACS 0x00000000AF66E000 000040
ACPI: FACS 0x00000000AF66E000 000040
ACPI: APIC 0x00000000AF660390 00006C (v02 A_M_I_ OEMAPIC  04001125 MSFT 00000097)
ACPI: MCFG 0x00000000AF660400 00003C (v01 A_M_I_ OEMMCFG  04001125 MSFT 00000097)
ACPI: ECDT 0x00000000AF660440 000055 (v01 A_M_I_ OEMECDT  04001125 MSFT 00000097)
ACPI: OEMB 0x00000000AF66E040 000061 (v01 A_M_I_ AMI_OEM  04001125 MSFT 00000097)
ACPI: HPET 0x00000000AF669E80 000038 (v01 A_M_I_ OEMHPET  04001125 MSFT 00000097)
ACPI: GSCI 0x00000000AF66E0B0 002024 (v01 A_M_I_ GMCHSCI  04001125 MSFT 00000097)
ACPI: SSDT 0x00000000AF6708A0 0004F0 (v01 PmRef  CpuPm    00003000 INTL 20060113)
ACPI: SLIC 0x00000000AF669EC0 000176 (v01 _ASUS_ Notebook 04001125 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000010fffffff]
NODE_DATA(0) allocated [mem 0x10fffa000-0x10fffefff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000010fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000af65ffff]
  node   0: [mem 0x0000000100000000-0x000000010fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000010fffffff]
On node 0 totalpages: 783870
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 11162 pages used for memmap
  DMA32 zone: 714336 pages, LIFO batch:31
  Normal zone: 1024 pages used for memmap
  Normal zone: 65536 pages, LIFO batch:15
Reserving Intel graphics stolen memory at 0xaf800000-0xafffffff
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xaf660000-0xaf66dfff]
PM: Registered nosave memory: [mem 0xaf66e000-0xaf6affff]
PM: Registered nosave memory: [mem 0xaf6b0000-0xaf6bffff]
PM: Registered nosave memory: [mem 0xaf6c0000-0xaf6dffff]
PM: Registered nosave memory: [mem 0xaf6e0000-0xaf6fffff]
PM: Registered nosave memory: [mem 0xaf700000-0xaf7fffff]
PM: Registered nosave memory: [mem 0xaf800000-0xafffffff]
PM: Registered nosave memory: [mem 0xb0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xb0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88010fc00000 s98264 r8192 d28712 u524288
pcpu-alloc: s98264 r8192 d28712 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 771599
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2964420K/3135480K available (8436K kernel code, 1291K rwdata, 3960K rodata, 1488K init, 1316K bss, 171060K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:456 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1799.891 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.78 BogoMIPS (lpj=7199564)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
ftrace: allocating 32064 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Atom(TM) CPU D525   @ 1.80GHz (family: 0x6, model: 0x1c, stepping: 0xa)
Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
... version:                3
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
Disabled fast string operations
 #2
Disabled fast string operations
 #3
Disabled fast string operations
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (14399.12 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xaf66e000-0xaf6affff] (270336 bytes)
PM: Registering ACPI NVS region [mem 0xaf6c0000-0xaf6dffff] (131072 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 10:39:00, date: 05/21/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI : EC: EC started
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88010B5C2000 000724 (v01 PmRef  Cpu0Cst  00003001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800AB01DC00 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xaf700000-0xfed8ffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:a000] type 00 class 0x060000
pci 0000:00:02.0: [8086:a001] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf5d00000-0xf5d7ffff]
pci 0000:00:02.0: reg 0x14: [io  0xcc00-0xcc07]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0xf5c00000-0xf5cfffff]
pci 0000:00:02.1: [8086:a002] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xf5d80000-0xf5dfffff]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf5bf8000-0xf5bfbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0xc400-0xc41f]
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0xc480-0xc49f]
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0xc800-0xc81f]
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io  0xc880-0xc89f]
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf5bf7c00-0xf5bf7fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xc080-0xc087]
pci 0000:00:1f.2: reg 0x14: [io  0xc000-0xc003]
pci 0000:00:1f.2: reg 0x18: [io  0xbc00-0xbc07]
pci 0000:00:1f.2: reg 0x1c: [io  0xb880-0xb883]
pci 0000:00:1f.2: reg 0x20: [io  0xb800-0xb81f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf5bf7800-0xf5bf7bff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
pci 0000:05:00.0: [10de:0a76] type 00 class 0x030000
pci 0000:05:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:05:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:05:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
pci 0000:05:00.0: reg 0x24: [io  0xec00-0xec7f]
pci 0000:05:00.0: reg 0x30: [mem 0xfbf00000-0xfbf7ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: [14e4:4727] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf9ffc000-0xf9ffffff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03-04]
pci 0000:00:1c.1:   bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xc8000000-0xcdffffff 64bit pref]
pci 0000:02:00.0: [1969:2062] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xf5fc0000-0xf5ffffff 64bit]
pci 0000:02:00.0: reg 0x18: [io  0xdc00-0xdc7f]
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xf5f00000-0xf5ffffff]
pci 0000:01:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0xf5efe000-0xf5efffff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 01]
pci 0000:00:1c.3:   bridge window [mem 0xf5e00000-0xf5efffff]
pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xaf700000-0xfed8ffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:05:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xaf660000-0xafffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
system 00:04: [io  0x025c-0x025f] has been reserved
system 00:04: [io  0x0380-0x0383] has been reserved
system 00:04: [io  0x0400-0x041f] has been reserved
system 00:04: [io  0x04d0-0x04d1] has been reserved
system 00:04: [io  0x0800-0x087f] could not be reserved
system 00:04: [io  0x0480-0x04bf] has been reserved
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:04: [mem 0xfed50000-0xfed8ffff] has been reserved
system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0xaf6fffff] could not be reserved
system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03-04] add_size 1000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.3: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.3: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-04]
pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.1:   bridge window [mem 0xf6000000-0xf9ffffff]
pci 0000:00:1c.1:   bridge window [mem 0xc8000000-0xcdffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xf5f00000-0xf5ffffff]
pci 0000:00:1c.2:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 01]
pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.3:   bridge window [mem 0xf5e00000-0xf5efffff]
pci 0000:00:1c.3:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 06]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xaf700000-0xfed8ffff window]
pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:05: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf9ffffff]
pci_bus 0000:03: resource 2 [mem 0xc8000000-0xcdffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf5f00000-0xf5ffffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xf5e00000-0xf5efffff]
pci_bus 0000:01: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:06: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:06: resource 8 [mem 0xaf700000-0xfed8ffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
pci 0000:00:1c.3: enabling device (0106 -> 0107)
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 36472K (ffff8800338b4000 - ffff880035c52000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xab660000-0xaf660000] (64MB) mapped at [ffff8800ab660000-ffff8800af65ffff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1495363141.680:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.1: enabling device (0106 -> 0107)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90000800000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x10
intel_idle: v0.4.1 model 0x1C
intel_idle: lapic_timer_reliable_states 0x2
ACPI: AC Adapter [AC0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (39 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf5bf7c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-58-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-58-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c480
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-58-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0-58-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c880
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.4.0-58-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:01:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.4.0-58-generic xhci-hcd
usb usb6: SerialNumber: 0000:01:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 7
usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 4.4.0-58-generic xhci-hcd
usb usb7: SerialNumber: 0000:01:00.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x106ca, pf=0x8, revision=0x107
microcode: CPU1 sig=0x106ca, pf=0x8, revision=0x107
microcode: CPU2 sig=0x106ca, pf=0x8, revision=0x107
microcode: CPU3 sig=0x106ca, pf=0x8, revision=0x107
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 1c061f062c14f76166dfaf1ddf354773ef9540f3'
zswap: loaded using pool lzo/zbud
ACPI: Battery Slot [BAT0] (battery present)
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 1:763:679
rtc_cmos 00:01: setting system clock to 2017-05-21 10:39:02 UTC (1495363142)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1488K (ffffffff81f44000 - ffffffff820b8000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1792K (ffff880001840000 - ffff880001a00000)
Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
usb 1-6: new high-speed USB device number 2 using ehci-pci
[drm] Initialized drm 1.1.0 20060810
atl1c 0000:02:00.0: version 1.0.1.1-NAPI
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m1024@0xf5bf7800 port 0xf5bf7900 irq 33
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
[drm] Memory usable by graphics device = 512M
checking generic (b0000000 300000) vs hw (b0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
atl1c 0000:02:00.0 enp2s0: renamed from eth0
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
usb 1-6: New USB device found, idVendor=13d3, idProduct=5071
usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=0
usb 1-6: Product: USB2.0 UVC 1.3M WebCam
usb 1-6: Manufacturer: GenesysLogic Technology Co. III, Ltd.
[drm] initialized overlay support
[Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/LNXVIDEO:00/input/input7
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
acpi device:2b: registered as cooling_device4
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: unexpected _GTF length (8)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: READ LOG DMA EXT failed, trying unqueued
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: unexpected _GTF length (8)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 1799.988 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f21e26ba5, max_idle_ns: 440795219359 ns
psmouse serio1: synaptics: queried max coordinates: x [..5624], y [..4754]
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 600854
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
clocksource: Switched to clocksource tsc
[drm:intel_enable_lvds [i915]] *ERROR* timed out waiting for panel to power on
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Set console keymap...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Read required files in advance.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Starting Nameserver information manager...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create list of required static device nodes for the current kernel.
lp: driver loaded but no devices found
systemd[1]: Started Nameserver information manager.
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Started Journal Service.
EXT4-fs (sda2): re-mounted. Opts: discard,errors=remount-ro
random: nonblocking pool is initialized
systemd-journald[281]: Received request to flush runtime journal from PID 1
audit: type=1400 audit(1495363150.462:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=515 comm="apparmor_parser"
audit: type=1400 audit(1495363150.486:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=518 comm="apparmor_parser"
audit: type=1400 audit(1495363150.494:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=513 comm="apparmor_parser"
audit: type=1400 audit(1495363150.494:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=513 comm="apparmor_parser"
audit: type=1400 audit(1495363150.494:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=513 comm="apparmor_parser"
audit: type=1400 audit(1495363150.494:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=513 comm="apparmor_parser"
audit: type=1400 audit(1495363150.498:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=516 comm="apparmor_parser"
audit: type=1400 audit(1495363150.498:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=516 comm="apparmor_parser"
audit: type=1400 audit(1495363150.498:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=517 comm="apparmor_parser"
audit: type=1400 audit(1495363150.498:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=517 comm="apparmor_parser"
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\PMIO) (20150930/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082F (\_SB_.PCI0.SBRG.IELK.GPSE) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB_.PCI0.SBRG.GPBX) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB_.PCI0.SBRG.GPBX) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or required key missing - tainting kernel
wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (13d3:5071)
input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
asus_wmi: ASUS WMI generic driver loaded
wl 0000:03:00.0 wlp3s0: renamed from wlan0
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.6
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input10
asus_wmi: Number of fans: 1
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:1e.0: PCI bridge to [bus 06]
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:1e.0: PCI bridge to [bus 06]
Adding 6684156k swap on /dev/mapper/cryptswap1.  Priority:-1 extents:1 across:6684156k SSFS
zram: Added device: zram0
zram: Added device: zram1
zram: Added device: zram2
zram: Added device: zram3
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:1e.0: PCI bridge to [bus 06]
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
zram0: detected capacity change from 0 to 384557056
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:1e.0: PCI bridge to [bus 06]
Adding 375540k swap on /dev/zram0.  Priority:5 extents:1 across:375540k SSFS
zram1: detected capacity change from 0 to 384557056
Adding 375540k swap on /dev/zram1.  Priority:5 extents:1 across:375540k SSFS
zram2: detected capacity change from 0 to 384557056
bbswitch: version 0.8
bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.VGA_
bbswitch: Found discrete VGA device 0000:05:00.0: \_SB_.PCI0.P0P4.GFX0
ACPI Warning: \_SB_.PCI0.P0P4.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
bbswitch: detected an Optimus _DSM function
pci 0000:05:00.0: enabling device (0000 -> 0003)
bbswitch: Succesfully loaded. Discrete card 0000:05:00.0 is on
Adding 375540k swap on /dev/zram2.  Priority:5 extents:1 across:375540k SSFS
zram3: detected capacity change from 0 to 384557056
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.P0P4.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
Adding 375540k swap on /dev/zram3.  Priority:5 extents:1 across:375540k SSFS
vboxdrv: Found 4 processor cores
vboxdrv: fAsync=0 offMin=0x5a0 offMax=0x29bb
vboxdrv: TSC mode is Synchronous, tentative frequency 1799987688 Hz
vboxdrv: Successfully loaded version 5.0.30 (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
atl1c 0000:02:00.0: atl1c: enp2s0 NIC Link is Up
perf interrupt took too long (2546 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5023 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
atl1c 0000:02:00.0: atl1c: enp2s0 NIC Link is Down
perf interrupt took too long (12497 > 10000), lowering kernel.perf_event_max_sample_rate to 12500

Return To Lamborghini_7zip System Information