dmesg - HighPerf-PreferMaxPerf-2xAF
Linux version 4.10.0-21-generic (buildd@lgw01-48) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #23~16.04.1-Ubuntu SMP Tue May 2 12:57:17 UTC 2017 (Ubuntu 4.10.0-21.23~16.04.1-generic 4.10.11)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000003c896fff] usable
BIOS-e820: [mem 0x000000003c897000-0x000000003c8c3fff] reserved
BIOS-e820: [mem 0x000000003c8c4000-0x000000003c9d9fff] ACPI data
BIOS-e820: [mem 0x000000003c9da000-0x000000003d5e7fff] ACPI NVS
BIOS-e820: [mem 0x000000003d5e8000-0x000000003ea94fff] reserved
BIOS-e820: [mem 0x000000003ea95000-0x000000003eb0afff] type 20
BIOS-e820: [mem 0x000000003eb0b000-0x000000003eb2dfff] usable
BIOS-e820: [mem 0x000000003eb2e000-0x000000003eb2ffff] reserved
BIOS-e820: [mem 0x000000003eb30000-0x000000003eb30fff] usable
BIOS-e820: [mem 0x000000003eb31000-0x000000003ebb6fff] ACPI NVS
BIOS-e820: [mem 0x000000003ebb7000-0x000000003effffff] usable
BIOS-e820: [mem 0x0000000040000000-0x000000004fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004bfffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0x3c8fb000 ACPI 2.0=0x3c8fb000 SMBIOS=0xf04c0 MPS=0xfd6c0
SMBIOS 2.7 present.
DMI: ASUSTeK COMPUTER INC. Z9PE-D8 WS/Z9PE-D8 WS, BIOS 5802 06/10/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x4c0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FFC00000000 write-back
1 base 000400000000 mask 3FFF80000000 write-back
2 base 000480000000 mask 3FFFC0000000 write-back
3 base 000040000000 mask 3FFFC0000000 uncachable
4 base 000080000000 mask 3FFF80000000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
total RAM covered: 16384M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 5 lose cover RAM: 0G
e820: update [mem 0x40000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x3f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdb50-0x000fdb5f] mapped at [ffff8e1dc00fdb50]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8e1dc0098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x148c27000, 0x148c27fff] PGTABLE
BRK [0x148c28000, 0x148c28fff] PGTABLE
BRK [0x148c29000, 0x148c29fff] PGTABLE
BRK [0x148c2a000, 0x148c2afff] PGTABLE
BRK [0x148c2b000, 0x148c2bfff] PGTABLE
BRK [0x148c2c000, 0x148c2cfff] PGTABLE
RAMDISK: [mem 0x28910000-0x2b76bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000003C8FB000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000003C8FB088 000094 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000003C9084C0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000003C8FB1B0 00D30F (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x000000003D5E5F80 000040
ACPI: APIC 0x000000003C9085D0 000100 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000003C9086D0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000003C908718 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 0x000000003C908758 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: MSDM 0x000000003C908790 000055 (v01 ALASKA A M I 01072009 00000000)
ACPI: PRAD 0x000000003C9087E8 0000BE (v02 PRADID PRADTID 00000001 MSFT 03000001)
ACPI: SSDT 0x000000003C9088A8 0D0CB0 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: BGRT 0x000000003C9D9558 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: EINJ 0x000000003C9D9590 000130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 0x000000003C9D96C0 000230 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 0x000000003C9D98F0 0000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 0x000000003C9D9998 000030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: DMAR 0x000000003C9D99C8 0000BC (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000004bfffffff]
NODE_DATA(0) allocated [mem 0x4bffd5000-0x4bfffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000004bfffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000003c896fff]
node 0: [mem 0x000000003eb0b000-0x000000003eb2dfff]
node 0: [mem 0x000000003eb30000-0x000000003eb30fff]
node 0: [mem 0x000000003ebb7000-0x000000003effffff]
node 0: [mem 0x0000000100000000-0x00000004bfffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000004bfffffff]
On node 0 totalpages: 4181155
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 3829 pages used for memmap
DMA32 zone: 244996 pages, LIFO batch:31
Normal zone: 61440 pages used for memmap
Normal zone: 3932160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x3c897000-0x3c8c3fff]
PM: Registered nosave memory: [mem 0x3c8c4000-0x3c9d9fff]
PM: Registered nosave memory: [mem 0x3c9da000-0x3d5e7fff]
PM: Registered nosave memory: [mem 0x3d5e8000-0x3ea94fff]
PM: Registered nosave memory: [mem 0x3ea95000-0x3eb0afff]
PM: Registered nosave memory: [mem 0x3eb2e000-0x3eb2ffff]
PM: Registered nosave memory: [mem 0x3eb31000-0x3ebb6fff]
PM: Registered nosave memory: [mem 0x3f000000-0x3fffffff]
PM: Registered nosave memory: [mem 0x40000000-0x4fffffff]
PM: Registered nosave memory: [mem 0x50000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x50000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff8e226f200000 s107992 r8192 d31272 u262144
pcpu-alloc: s107992 r8192 d31272 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4115797
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16131764K/16724620K available (9058K kernel code, 1666K rwdata, 3836K rodata, 2224K init, 2364K bss, 592856K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=12
NR_IRQS:524544 nr_irqs:928 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2299.762 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4599.52 BogoMIPS (lpj=9199048)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 34199 entries in 134 pages
smpboot: Max logical packages: 2
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0462 ecap f020ff
DMAR: RMRR base: 0x0000003e975000 end: 0x0000003e98bfff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2630 0 @ 2.30GHz (family: 0x6, model: 0x2d, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (55194.28 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x3c9da000-0x3d5e7fff] (12640256 bytes)
PM: Registering ACPI NVS region [mem 0x3eb31000-0x3ebb6fff] (548864 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 6:01:52, date: 05/20/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x40000000-0x4fffffff] (base 0x40000000)
PCI: MMCONFIG at [mem 0x40000000-0x4fffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [mem 0x380000000000-0x383fffffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [8086:3c20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0x383ffff20000-0x383ffff23fff 64bit]
pci 0000:00:04.1: [8086:3c21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0x383ffff1c000-0x383ffff1ffff 64bit]
pci 0000:00:04.2: [8086:3c22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0x383ffff18000-0x383ffff1bfff 64bit]
pci 0000:00:04.3: [8086:3c23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0x383ffff14000-0x383ffff17fff 64bit]
pci 0000:00:04.4: [8086:3c24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0x383ffff10000-0x383ffff13fff 64bit]
pci 0000:00:04.5: [8086:3c25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0x383ffff0c000-0x383ffff0ffff 64bit]
pci 0000:00:04.6: [8086:3c26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0x383ffff08000-0x383ffff0bfff 64bit]
pci 0000:00:04.7: [8086:3c27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0x383ffff04000-0x383ffff07fff 64bit]
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xf3106000-0xf3106fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf3105000-0xf310500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xf3104000-0xf310400f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf3102000-0xf31023ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x383ffff00000-0x383ffff03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf3101000-0xf31013ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf3100000-0xf31007ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x383ffff24000-0x383ffff240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [10de:13c2] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:03:00.0: reg 0x30: [mem 0xf3000000-0xf307ffff pref]
pci 0000:03:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xf3080000-0xf3083fff]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xe0000000-0xf30fffff]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [8086:1d6b] type 00 class 0x010700
pci 0000:05:00.0: reg 0x10: [mem 0xf3800000-0xf3803fff 64bit pref]
pci 0000:05:00.0: reg 0x18: [mem 0xf3400000-0xf37fffff 64bit pref]
pci 0000:05:00.0: reg 0x20: [io 0xd000-0xd0ff]
pci 0000:05:00.0: reg 0x164: [mem 0x383fffe00000-0x383fffe03fff 64bit pref]
pci 0000:05:00.0: VF(n) BAR0 space: [mem 0x383fffe00000-0x383fffe7bfff 64bit pref] (contains BAR0 for 31 VFs)
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:00:11.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:11.0: bridge window [mem 0xf3400000-0xf38fffff]
pci 0000:00:11.0: bridge window [mem 0x383fffe00000-0x383fffefffff 64bit pref]
pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xf3f00000-0xf3f1ffff]
pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f]
pci 0000:06:00.0: reg 0x1c: [mem 0xf3f20000-0xf3f23fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xf3f00000-0xf3ffffff]
pci 0000:07:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xf3e00000-0xf3e1ffff]
pci 0000:07:00.0: reg 0x18: [io 0xb000-0xb01f]
pci 0000:07:00.0: reg 0x1c: [mem 0xf3e20000-0xf3e23fff]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xf3e00000-0xf3efffff]
pci 0000:08:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xf3d00000-0xf3d07fff 64bit]
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2: bridge window [mem 0xf3d00000-0xf3dfffff]
pci 0000:09:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:09:00.0: reg 0x10: [mem 0xf3c00000-0xf3c07fff 64bit]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [mem 0xf3c00000-0xf3cfffff]
pci 0000:0a:00.0: [1b4b:9230] type 00 class 0x010601
pci 0000:0a:00.0: reg 0x10: [io 0xa050-0xa057]
pci 0000:0a:00.0: reg 0x14: [io 0xa040-0xa043]
pci 0000:0a:00.0: reg 0x18: [io 0xa030-0xa037]
pci 0000:0a:00.0: reg 0x1c: [io 0xa020-0xa023]
pci 0000:0a:00.0: reg 0x20: [io 0xa000-0xa01f]
pci 0000:0a:00.0: reg 0x24: [mem 0xf3b10000-0xf3b107ff]
pci 0000:0a:00.0: reg 0x30: [mem 0xf3b00000-0xf3b0ffff pref]
pci 0000:0a:00.0: Enabling fixed DMA alias to 00.1
pci 0000:0a:00.0: PME# supported from D3hot
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.4: bridge window [mem 0xf3b00000-0xf3bfffff]
pci 0000:0b:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:0b:00.0: reg 0x10: [mem 0xf3a00000-0xf3a007ff 64bit]
pci 0000:0b:00.0: reg 0x18: [io 0x9000-0x90ff]
pci 0000:0b:00.0: supports D2
pci 0000:0b:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 0b]
pci 0000:00:1c.6: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.6: bridge window [mem 0xf3a00000-0xf3afffff]
pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x40000000-0xfbffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x380000000000-0x383fffffffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:ff: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:03:00.0: vgaarb: setting as boot VGA device
pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:03:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x3c897000-0x3fffffff]
e820: reserve RAM buffer [mem 0x3eb2e000-0x3fffffff]
e820: reserve RAM buffer [mem 0x3eb31000-0x3fffffff]
e820: reserve RAM buffer [mem 0x3f000000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0x00000400-0x000004ff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [io 0x0400-0x0453] has been reserved
system 00:07: [io 0x0458-0x047f] has been reserved
system 00:07: [io 0x1180-0x119f] has been reserved
system 00:07: [io 0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io 0x0454-0x0457] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xe0000000-0xf30fffff]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:00:11.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:11.0: bridge window [mem 0xf3400000-0xf38fffff]
pci 0000:00:11.0: bridge window [mem 0x383fffe00000-0x383fffefffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xf3f00000-0xf3ffffff]
pci 0000:00:1c.1: PCI bridge to [bus 07]
pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.1: bridge window [mem 0xf3e00000-0xf3efffff]
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2: bridge window [mem 0xf3d00000-0xf3dfffff]
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [mem 0xf3c00000-0xf3cfffff]
pci 0000:00:1c.4: PCI bridge to [bus 0a]
pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.4: bridge window [mem 0xf3b00000-0xf3bfffff]
pci 0000:00:1c.6: PCI bridge to [bus 0b]
pci 0000:00:1c.6: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.6: bridge window [mem 0xf3a00000-0xf3afffff]
pci 0000:00:1e.0: PCI bridge to [bus 0c]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x40000000-0xfbffffff window]
pci_bus 0000:00: resource 11 [mem 0x380000000000-0x383fffffffff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xe0000000-0xf30fffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xf3400000-0xf38fffff]
pci_bus 0000:05: resource 2 [mem 0x383fffe00000-0x383fffefffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xf3f00000-0xf3ffffff]
pci_bus 0000:07: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:07: resource 1 [mem 0xf3e00000-0xf3efffff]
pci_bus 0000:08: resource 1 [mem 0xf3d00000-0xf3dfffff]
pci_bus 0000:09: resource 1 [mem 0xf3c00000-0xf3cfffff]
pci_bus 0000:0a: resource 0 [io 0xa000-0xafff]
pci_bus 0000:0a: resource 1 [mem 0xf3b00000-0xf3bfffff]
pci_bus 0000:0b: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:0b: resource 1 [mem 0xf3a00000-0xf3afffff]
pci_bus 0000:0c: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:0c: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:0c: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:0c: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:0c: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0c: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:0c: resource 10 [mem 0x40000000-0xfbffffff window]
pci_bus 0000:0c: resource 11 [mem 0x380000000000-0x383fffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 47472K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x385a7000-0x3c5a7000] (64MB) mapped at [ffff8e1df85a7000-ffff8e1dfc5a6fff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1495260113.164:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: Signaling PME with IRQ 25
pcieport 0000:00:01.1: Signaling PME with IRQ 26
pcieport 0000:00:02.0: Signaling PME with IRQ 28
pcieport 0000:00:03.0: Signaling PME with IRQ 30
pcieport 0000:00:11.0: Signaling PME with IRQ 31
pcieport 0000:00:1c.0: Signaling PME with IRQ 32
pcieport 0000:00:1c.1: Signaling PME with IRQ 33
pcieport 0000:00:1c.2: Signaling PME with IRQ 34
pcieport 0000:00:1c.3: Signaling PME with IRQ 35
pcieport 0000:00:1c.4: Signaling PME with IRQ 36
pcieport 0000:00:1c.6: Signaling PME with IRQ 37
efifb: probing for efifb
efifb: framebuffer at 0xf1000000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: using zlib compression
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 17, io mem 0xf3102000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-21-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3101000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-21-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:08:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.10.0-21-generic xhci-hcd
usb usb3: SerialNumber: 0000:08:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.10.0-21-generic xhci-hcd
usb usb4: SerialNumber: 0000:08:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:09:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.10.0-21-generic xhci-hcd
usb usb5: SerialNumber: 0000:09:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.10.0-21-generic xhci-hcd
usb usb6: SerialNumber: 0000:09:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x206d7, pf=0x1, revision=0x710
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 3037061acd71f1aa83259540b4bf55ee8a7cdb7b'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
BERT: Can't request iomem region .
Magic number: 1:93:14
memory memory58: hash matches
rtc_cmos 00:03: setting system clock to 2017-05-20 06:01:53 UTC (1495260113)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2224K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1168K
Freeing unused kernel memory: 260K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
[drm] Initialized
ahci 0000:00:1f.2: version 3.0
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:06:00.0: enabling device (0000 -> 0002)
e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
isci 0000:05:00.0: driver configured for rev: 6 silicon
isci 0000:05:00.0: Unable to obtain EFI var data for OEM parms
isci 0000:05:00.0: OEM SAS parameters (version: 1.3) loaded (firmware)
isci 0000:05:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short}
scsi host0: isci
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia 0000:03:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 243
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 378.13 Tue Feb 7 20:10:06 PST 2017
(using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 378.13 Tue Feb 7 18:30:08 PST 2017
[drm] [nvidia-drm] [GPU ID 0x00000300] Loading driver
e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock
usb 1-1: new high-speed USB device number 2 using ehci-pci
firewire_ohci 0000:0b:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x10
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
ata1: SATA max UDMA/133 abar m2048@0xf3100000 port 0xf3100100 irq 55
ata2: SATA max UDMA/133 abar m2048@0xf3100000 port 0xf3100180 irq 55
ata3: SATA max UDMA/133 abar m2048@0xf3100000 port 0xf3100200 irq 55
ata4: SATA max UDMA/133 abar m2048@0xf3100000 port 0xf3100280 irq 55
ata5: SATA max UDMA/133 abar m2048@0xf3100000 port 0xf3100300 irq 55
ata6: SATA max UDMA/133 abar m2048@0xf3100000 port 0xf3100380 irq 55
ahci 0000:0a:00.0: controller can do FBS, turning on CAP_FBS
usb 2-1: new high-speed USB device number 2 using ehci-pci
ahci 0000:0a:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:0a:00.0: flags: 64bit ncq fbs pio
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
scsi host11: ahci
scsi host12: ahci
scsi host13: ahci
scsi host14: ahci
ata7: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10100 irq 61
ata8: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10180 irq 61
ata9: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10200 irq 61
ata10: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10280 irq 61
ata11: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10300 irq 61
ata12: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10380 irq 61
ata13: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10400 irq 61
ata14: SATA max UDMA/133 abar m2048@0xf3b10000 port 0xf3b10480 irq 61
e1000e 0000:06:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 60:a4:4c:04:13:02
e1000e 0000:06:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:06:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:07:00.0: enabling device (0000 -> 0002)
e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:07:00.0 0000:07:00.0 (uninitialized): registered PHC clock
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
e1000e 0000:07:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 60:a4:4c:04:13:03
e1000e 0000:07:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:07:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: NCQ Send/Recv Log not supported
ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: NCQ Send/Recv Log not supported
ata1.00: configured for UDMA/133
ata2.00: ATA-8: OCZ-AGILITY3, 2.25, max UDMA/133
ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata10: SATA link down (SStatus 0 SControl 300)
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata14.00: configured for UDMA/66
ata2.00: configured for UDMA/133
usb 2-1.3: new low-speed USB device number 3 using ehci-pci
firewire_core 0000:0b:00.0: created device fw0: GUID 001fc600001cd618, S400
usb 2-1.3: New USB device found, idVendor=1e7d, idProduct=38a4
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.3: Product: ROCCAT Kave Headset
usb 2-1.3: Manufacturer: HOLTEK
tsc: Refined TSC clocksource calibration: 2299.962 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21271171d96, max_idle_ns: 440795302441 ns
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HOLTEK ROCCAT Kave Headset as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:1E7D:38A4.0001/input/input2
hid-generic 0003:1E7D:38A4.0001: input,hidraw0: USB HID v1.10 Device [HOLTEK ROCCAT Kave Headset] on usb-0000:00:1d.0-1.3/input0
usb 2-1.5: new full-speed USB device number 4 using ehci-pci
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 2-1.5: New USB device found, idVendor=046d, idProduct=c223
usb 2-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.5: Product: G15 Keyboard Hub
hub 2-1.5:1.0: USB hub found
hub 2-1.5:1.0: 4 ports detected
random: fast init done
usb 2-1.6: new full-speed USB device number 5 using ehci-pci
usb 2-1.6: New USB device found, idVendor=046d, idProduct=c068
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: Product: G500
usb 2-1.6: Manufacturer: Logitech
usb 2-1.6: SerialNumber: 99BE3F9CC70018
ata7.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:046D:C068.0002/input/input3
ata7.00: configured for UDMA/133
hid-generic 0003:046D:C068.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.0-1.6/input0
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:046D:C068.0003/input/input4
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: ATA-8: Hitachi HDS721010DLE630, MS2OA5Q0, max UDMA/133
ata9.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata9.00: configured for UDMA/133
hid-generic 0003:046D:C068.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.0-1.6/input1
usb 2-1.5.1: new low-speed USB device number 6 using ehci-pci
usb 2-1.5.1: New USB device found, idVendor=046d, idProduct=c226
usb 2-1.5.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.5.1: Product: G15 Gaming Keyboard
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.0/0003:046D:C226.0004/input/input5
hid-generic 0003:046D:C226.0004: input,hidraw3: USB HID v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1d.0-1.5.1/input0
input: G15 Gaming Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.1/0003:046D:C226.0005/input/input6
hid-generic 0003:046D:C226.0005: input,hiddev0,hidraw4: USB HID v1.10 Device [G15 Gaming Keyboard] on usb-0000:00:1d.0-1.5.1/input1
usb 2-1.5.4: new full-speed USB device number 7 using ehci-pci
usb 2-1.5.4: New USB device found, idVendor=046d, idProduct=c227
usb 2-1.5.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.5.4: Product: G15 GamePanel LCD
input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.4/2-1.5.4:1.0/0003:046D:C227.0006/input/input7
hid-generic 0003:046D:C227.0006: input,hiddev0,hidraw5: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1d.0-1.5.4/input0
clocksource: Switched to clocksource tsc
sas: phy-0:2 added to port-0:0, phy_mask:0x4 (5fcfffff00000003)
sas: phy-0:3 added to port-0:1, phy_mask:0x8 (5fcfffff00000004)
sas: DOING DISCOVERY on port 0, pid:284
sas: DONE DISCOVERY on port 0, pid:284, result:0
sas: DOING DISCOVERY on port 1, pid:284
sas: DONE DISCOVERY on port 1, pid:284, result:0
sas: Enter sas_scsi_recover_host busy: 0 failed: 0
sas: ata15: end_device-0:0: dev error handler
ata15.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX03, max UDMA/100
ata15.00: configured for UDMA/100
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS70 EX03 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: Enter sas_scsi_recover_host busy: 0 failed: 1
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
ata16.00: ATAPI: HL-DT-ST BD-RE BH16NS40, 1.01, max UDMA/100
ata16.00: configured for UDMA/100
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 2
scsi 0:0:1:0: CD-ROM HL-DT-ST BD-RE BH16NS40 1.01 PQ: 0 ANSI: 5
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
sr 0:0:1:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 0:0:1:0: Attached scsi CD-ROM sr1
sr 0:0:1:0: Attached scsi generic sg1 type 5
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.25 PQ: 0 ANSI: 5
Alternate GPT is invalid, using primary GPT.
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg3 type 0
sd 2:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 7:0:0:0: Direct-Access ATA WDC WD20EZRX-00D 0A80 PQ: 0 ANSI: 5
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 7:0:0:0: Attached scsi generic sg4 type 0
sd 7:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 7:0:0:0: [sdc] 4096-byte physical blocks
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 9:0:0:0: Direct-Access ATA Hitachi HDS72101 A5Q0 PQ: 0 ANSI: 5
sd 9:0:0:0: Attached scsi generic sg5 type 0
sd 9:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 9:0:0:0: [sdd] 4096-byte physical blocks
sd 9:0:0:0: [sdd] Write Protect is off
sd 9:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 14:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5
scsi 14:0:0:0: Attached scsi generic sg6 type 3
sdd: sdd1
sd 9:0:0:0: [sdd] Attached SCSI disk
sdc: sdc1
sd 7:0:0:0: [sdc] Attached SCSI disk
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
sas: Enter sas_scsi_recover_host busy: 2 failed: 2
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 2 tries: 1
sas: Enter sas_scsi_recover_host busy: 2 failed: 2
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 2 tries: 1
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
sas: Enter sas_scsi_recover_host busy: 2 failed: 2
sas: ata15: end_device-0:0: cmd error handler
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 2 tries: 1
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Kernel Socket.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,discard
systemd-journald[395]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 4.00
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
ipmi message handler version 39.2
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
ipmi device interface
wmi: Mapper loaded
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
ipmi_si ipmi_si.0: Interface detection failed
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
random: crng init done
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:03:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 239
IPMI SSIF Interface driver
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sas: Enter sas_scsi_recover_host busy: 2 failed: 2
sas: ata15: end_device-0:0: cmd error handler
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 2 tries: 1
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
sas: Enter sas_scsi_recover_host busy: 2 failed: 2
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 2 tries: 1
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
sas: Enter sas_scsi_recover_host busy: 2 failed: 2
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 2 tries: 1
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input19
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
Adding 8095996k swap on /swap/swapfile.bin. Priority:-1 extents:178 across:36533116k SSFS
audit: type=1400 audit(1495260124.885:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1089 comm="apparmor_parser"
audit: type=1400 audit(1495260124.889:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1096 comm="apparmor_parser"
audit: type=1400 audit(1495260124.889:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1101 comm="apparmor_parser"
audit: type=1400 audit(1495260124.889:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1098 comm="apparmor_parser"
audit: type=1400 audit(1495260124.889:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1098 comm="apparmor_parser"
audit: type=1400 audit(1495260124.889:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1103 comm="apparmor_parser"
audit: type=1400 audit(1495260124.889:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1093 comm="apparmor_parser"
audit: type=1400 audit(1495260124.889:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1093 comm="apparmor_parser"
audit: type=1400 audit(1495260124.889:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1093 comm="apparmor_parser"
audit: type=1400 audit(1495260124.889:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1093 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
cgroup: new mount options do not match the existing superblock, will be ignored
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered disabled state
device eth0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
br0: port 1(eth0) entered blocking state
br0: port 1(eth0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
kauditd_printk_skb: 84 callbacks suppressed
audit: type=1400 audit(1495260130.893:40): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/lxc-start" pid=1756 comm="apparmor_parser"
ip_tables: (C) 2000-2006 Netfilter Core Team
audit: type=1400 audit(1495260130.897:41): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default" pid=1767 comm="apparmor_parser"
audit: type=1400 audit(1495260130.897:42): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-cgns" pid=1767 comm="apparmor_parser"
audit: type=1400 audit(1495260130.897:43): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-mounting" pid=1767 comm="apparmor_parser"
audit: type=1400 audit(1495260130.897:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-nesting" pid=1767 comm="apparmor_parser"
audit: type=1400 audit(1495260130.981:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/lxc-start" pid=1811 comm="apparmor_parser"
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffffa772b2c0)
audit: type=1400 audit(1495260130.989:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default" pid=1826 comm="apparmor_parser"
audit: type=1400 audit(1495260130.989:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-cgns" pid=1826 comm="apparmor_parser"
audit: type=1400 audit(1495260130.989:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-mounting" pid=1826 comm="apparmor_parser"
audit: type=1400 audit(1495260130.989:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-nesting" pid=1826 comm="apparmor_parser"
nvidia-modeset: Allocated GPU:0 (GPU-a3617cfe-3af8-a010-b422-8979a463ce2f) @ PCI:0000:03:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 5
input: G15 Extra Keys as /devices/virtual/input/input20
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata15: end_device-0:0: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1
sas: Enter sas_scsi_recover_host busy: 2 failed: 2
sas: ata15: end_device-0:0: cmd error handler
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 2 tries: 1
sas: Enter sas_scsi_recover_host busy: 1 failed: 1
sas: ata16: end_device-0:1: cmd error handler
sas: ata15: end_device-0:0: dev error handler
sas: ata16: end_device-0:1: dev error handler
sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 1 tries: 1