dmesg - test01
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-62-generic (buildd@lcy01-30) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #83-Ubuntu SMP Wed Jan 18 14:10:15 UTC 2017 (Ubuntu 4.4.0-62.83-generic 4.4.40)
Command line: BOOT_IMAGE=/vmlinuz-4.4.0-62-generic root=/dev/mapper/servidorHP--vg-root ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000997ff] usable
BIOS-e820: [mem 0x0000000000099800-0x0000000000099bff] reserved
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000f1de3fff] usable
BIOS-e820: [mem 0x00000000f1de4000-0x00000000f1dedfff] ACPI data
BIOS-e820: [mem 0x00000000f1dee000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000040bffefff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: HP ProLiant MicroServer Gen8, BIOS J06 11/02/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x40bfff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0F4000000 mask FFC000000 uncachable
1 base 0F8000000 mask FF8000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xf1de4 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000093000] 93000 size 24576
BRK [0x0220b000, 0x0220bfff] PGTABLE
BRK [0x0220c000, 0x0220cfff] PGTABLE
BRK [0x0220d000, 0x0220dfff] PGTABLE
BRK [0x0220e000, 0x0220efff] PGTABLE
BRK [0x0220f000, 0x0220ffff] PGTABLE
BRK [0x02210000, 0x02210fff] PGTABLE
RAMDISK: [mem 0x3382e000-0x35c0efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP )
ACPI: XSDT 0x00000000F1DE6400 0000B4 (v01 HP ProLiant 00000002 \xffffffd2? 0000162E)
ACPI: FACP 0x00000000F1DE6540 0000F4 (v03 HP ProLiant 00000002 \xffffffd2? 0000162E)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20150930/tbfadt-623)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20150930/tbfadt-623)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20150930/tbfadt-704)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20150930/tbfadt-704)
ACPI: DSDT 0x00000000F1DE6640 001C1A (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 0x00000000F1DE4140 000040
ACPI: FACS 0x00000000F1DE4140 000040
ACPI: SPCR 0x00000000F1DE4180 000050 (v01 HP SPCRRBSU 00000001 \xffffffd2? 0000162E)
ACPI: MCFG 0x00000000F1DE4200 00003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 0x00000000F1DE4240 000038 (v01 HP ProLiant 00000002 \xffffffd2? 0000162E)
ACPI: FFFF 0x00000000F1DE4280 000064 (v02 HP ProLiant 00000002 \xffffffd2? 0000162E)
ACPI: SPMI 0x00000000F1DE4300 000040 (v05 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: ERST 0x00000000F1DE4340 000230 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: APIC 0x00000000F1DE4580 000252 (v01 HP ProLiant 00000002 00000000)
ACPI: FFFF 0x00000000F1DE4800 000176 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: BERT 0x00000000F1DE4980 000030 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: HEST 0x00000000F1DE49C0 0000BC (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: FFFF 0x00000000F1DE4A80 001914 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E)
ACPI: FFFF 0x00000000F1DE63C0 00002D (v01 HP ProLiant 00000001 00000000)
ACPI: SSDT 0x00000000F1DE8280 000137 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 0x00000000F1DE83C0 000177 (v03 HP riser0 00000002 INTL 20030228)
ACPI: SSDT 0x00000000F1DE8540 0001E1 (v01 HP pcc 00000001 INTL 20090625)
ACPI: SSDT 0x00000000F1DE8740 000377 (v01 HP pmab 00000001 INTL 20090625)
ACPI: SSDT 0x00000000F1DE8AC0 000504 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000040bffefff]
NODE_DATA(0) allocated [mem 0x40bffa000-0x40bffefff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000040bffefff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000098fff]
node 0: [mem 0x0000000000100000-0x00000000f1de3fff]
node 0: [mem 0x0000000100000000-0x000000040bffefff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000040bffefff]
On node 0 totalpages: 4185467
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3992 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 986596 pages, LIFO batch:31
Normal zone: 49920 pages used for memmap
Normal zone: 3194879 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 64 CPUs, 62 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
PM: Registered nosave memory: [mem 0x00099000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xf1de4000-0xf1dedfff]
PM: Registered nosave memory: [mem 0xf1dee000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfee0ffff]
PM: Registered nosave memory: [mem 0xfee10000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xf8000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:64 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff8803fa200000 s98264 r8192 d28712 u262144
pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
pcpu-alloc: [0] 32 33 34 35 36 37 38 39 [0] 40 41 42 43 44 45 46 47
pcpu-alloc: [0] 48 49 50 51 52 53 54 55 [0] 56 57 58 59 60 61 62 63
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4119142
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-62-generic root=/dev/mapper/servidorHP--vg-root ro
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 258048 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 524288 bytes
early log buf free: 251668(96%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16347012K/16741868K available (8436K kernel code, 1291K rwdata, 3960K rodata, 1488K init, 1316K bss, 394856K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=64.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=64
NR_IRQS:33024 nr_irqs:936 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.823 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.64 BogoMIPS (lpj=9179292)
pid_max: default: 65536 minimum: 512
ACPI: Core revision 20150930
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
ftrace: allocating 32065 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 32
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Celeron(R) CPU G1610T @ 2.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (9179.29 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 11:53:47, date: 04/14/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-14])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant []
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff window]; [mem 0xfed00000-0xfed44fff window] ignored
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window]
pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window]
pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [bus 00-14]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [8086:015d] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfacf0000-0xfacf03ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xface0000-0xface03ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1c54] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x10c0-0x10c7]
pci 0000:00:1f.2: reg 0x14: [io 0x10c8-0x10cb]
pci 0000:00:1f.2: reg 0x18: [io 0x10d0-0x10d7]
pci 0000:00:1f.2: reg 0x1c: [io 0x10d8-0x10db]
pci 0000:00:1f.2: reg 0x20: [io 0x10e0-0x10ff]
pci 0000:00:1f.2: reg 0x24: [mem 0xfacd0000-0xfacd07ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 07]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: PCI bridge to [bus 0d]
pci 0000:03:00.0: [14e4:165f] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfabf0000-0xfabfffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xfabe0000-0xfabeffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xfabd0000-0xfabdffff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: [14e4:165f] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xfabc0000-0xfabcffff 64bit pref]
pci 0000:03:00.1: reg 0x18: [mem 0xfabb0000-0xfabbffff 64bit pref]
pci 0000:03:00.1: reg 0x20: [mem 0xfaba0000-0xfabaffff 64bit pref]
pci 0000:03:00.1: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xfab00000-0xfabfffff 64bit pref]
pci 0000:04:00.0: [1912:0014] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfbff0000-0xfbff1fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 04]
pci 0000:00:1c.6: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:01:00.0: [103c:3306] type 00 class 0x088000
pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x14: [mem 0xfbef0000-0xfbef01ff]
pci 0000:01:00.0: reg 0x18: [io 0x3400-0x34ff]
pci 0000:01:00.1: [102b:0533] type 00 class 0x030000
pci 0000:01:00.1: reg 0x10: [mem 0xf9000000-0xf9ffffff pref]
pci 0000:01:00.1: reg 0x14: [mem 0xfbee0000-0xfbee3fff]
pci 0000:01:00.1: reg 0x18: [mem 0xfb000000-0xfb7fffff]
pci 0000:01:00.2: [103c:3307] type 00 class 0x088000
pci 0000:01:00.2: reg 0x10: [io 0x3800-0x38ff]
pci 0000:01:00.2: reg 0x14: [mem 0xfaff0000-0xfaff00ff]
pci 0000:01:00.2: reg 0x18: [mem 0xfae00000-0xfaefffff]
pci 0000:01:00.2: reg 0x1c: [mem 0xfad80000-0xfadfffff]
pci 0000:01:00.2: reg 0x20: [mem 0xfad70000-0xfad77fff]
pci 0000:01:00.2: reg 0x24: [mem 0xfad60000-0xfad67fff]
pci 0000:01:00.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.4: [103c:3300] type 00 class 0x0c0300
pci 0000:01:00.4: reg 0x20: [io 0x3c00-0x3c1f]
pci 0000:00:1c.7: PCI bridge to [bus 01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbefffff]
pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 14] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfbffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed44fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *4
ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled.
vgaarb: setting as boot device: PCI:0000:01:00.1
vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.1
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00099800-0x0009ffff]
e820: reserve RAM buffer [mem 0xf1de4000-0xf3ffffff]
e820: reserve RAM buffer [mem 0x40bfff000-0x40bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0408-0x040f] has been reserved
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0310-0x0313] has been reserved
system 00:00: [io 0x0316-0x0317] has been reserved
system 00:00: [io 0x0700-0x071f] has been reserved
system 00:00: [io 0x0880-0x08ff] has been reserved
system 00:00: [io 0x0900-0x097f] has been reserved
system 00:00: [io 0x0cd4-0x0cd7] has been reserved
system 00:00: [io 0x0cd0-0x0cd3] has been reserved
system 00:00: [io 0x0f50-0x0f58] has been reserved
system 00:00: [io 0x0ca0-0x0ca1] has been reserved
system 00:00: [io 0x0ca4-0x0ca5] has been reserved
system 00:00: [io 0x02f8-0x02ff] has been reserved
system 00:00: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8000000-0xf80fffff]
pci 0000:00:01.0: PCI bridge to [bus 07]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: PCI bridge to [bus 0d]
pci 0000:03:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]
pci 0000:03:00.1: BAR 6: assigned [mem 0xf8020000-0xf803ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:1c.4: bridge window [mem 0xfab00000-0xfabfffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 04]
pci 0000:00:1c.6: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref]
pci 0000:00:1c.7: PCI bridge to [bus 01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbefffff]
pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 14]
pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfbffffff window]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 6 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window]
pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff window]
pci_bus 0000:00: resource 10 [io 0x03b0-0x03bb window]
pci_bus 0000:00: resource 11 [io 0x03c0-0x03df window]
pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf80fffff]
pci_bus 0000:03: resource 2 [mem 0xfab00000-0xfabfffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xfad00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref]
pci_bus 0000:14: resource 4 [mem 0xf8000000-0xfbffffff window]
pci_bus 0000:14: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:14: resource 6 [io 0x0000-0x03af window]
pci_bus 0000:14: resource 7 [io 0x03e0-0x0cf7 window]
pci_bus 0000:14: resource 8 [io 0x0d00-0x0fff window]
pci_bus 0000:14: resource 9 [mem 0xfed00000-0xfed44fff window]
pci_bus 0000:14: resource 10 [io 0x03b0-0x03bb window]
pci_bus 0000:14: resource 11 [io 0x03c0-0x03df window]
pci_bus 0000:14: resource 12 [mem 0x000a0000-0x000bffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.1: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 36740K (ffff88003382e000 - ffff880035c0f000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xedde4000-0xf1de4000] (64MB) mapped at [ffff8800edde4000-ffff8800f1de3fff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain pp1-gpu 2^-16 Joules
Scanning for low memory corruption every 60 seconds
futex hash table entries: 16384 (order: 8, 1048576 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1492170828.000:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90001e00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 21, io mem 0xfacf0000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-62-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 20, io mem 0xface0000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-62-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:00.4: UHCI Host Controller
uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:00.4: detected 8 ports
uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-62-generic uhci_hcd
usb usb3: SerialNumber: 0000:01:00.4
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:04:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000010
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0-62-generic xhci-hcd
usb usb4: SerialNumber: 0000:04:00.0
hub 4-0:1.0: USB hub found
usb 1-1: new high-speed USB device number 2 using ehci-pci
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.4.0-62-generic xhci-hcd
usb usb5: SerialNumber: 0000:04:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1c
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1c
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: a630254739635d6fdc487c9f0afa5d9a0ff04f04'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 13:543:883
rtc_cmos 00:01: setting system clock to 2017-04-14 11:53:49 UTC (1492170829)
pcc-cpufreq: (v1.10.00) driver loaded with frequency limits: 2128 MHz, 2300 MHz
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
tsc: Refined TSC clocksource calibration: 2294.787 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f8b171d, max_idle_ns: 440795241185 ns
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
Freeing unused kernel memory: 1488K (ffffffff81f44000 - ffffffff820b8000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1792K (ffff880001840000 - ffff880001a00000)
Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.137 (May 11, 2014)
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
tg3 0000:03:00.0 eth0: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 00:fd:45:fc:5f:54
tg3 0000:03:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
usb 2-1.3: new high-speed USB device number 3 using ehci-pci
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems apst
tg3 0000:03:00.1 eth1: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 00:fd:45:fc:5f:55
usb 2-1.3: New USB device found, idVendor=0424, idProduct=2660
usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 2 ports detected
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0100 irq 29
ata2: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0180 irq 29
ata3: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0200 irq 29
ata4: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0280 irq 29
ata5: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0300 irq 29
ata6: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0380 irq 29
tg3 0000:03:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:03:00.1 eno2: renamed from eth1
tg3 0000:03:00.0 eno1: renamed from eth0
usb 2-1.3.1: new high-speed USB device number 4 using ehci-pci
usb 2-1.3.1: New USB device found, idVendor=0424, idProduct=4030
usb 2-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3.1: Product: Ultra Fast Media Reader
usb 2-1.3.1: Manufacturer: Generic
usb 2-1.3.1: SerialNumber: 000002660A01
clocksource: Switched to clocksource tsc
usb-storage 2-1.3.1:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-1.3.1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-10: WDC WD10EZEX-21WN4A0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-21W 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
scsi 6:0:0:0: Direct-Access HP iLO Internal SD-CARD 2.10 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] 125067264 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdc] No Caching mode page found
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1 sdc2 < sdc5 >
sd 6:0:0:0: [sdc] Attached SCSI disk
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: disabling queued TRIM support
ata5.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
ata5.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: disabling queued TRIM support
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 4:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdd] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
md: bind
md: bind
md: raid1 personality registered for level 1
md/raid1:md0: active with 2 out of 2 mirrors
created bitmap (8 pages) for device md0
md0: bitmap initialized from disk: read 1 pages, set 0 of 14903 bits
md0: detected capacity change from 0 to 1000070643712
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
raid6: sse2x1 gen() 6289 MB/s
raid6: sse2x1 xor() 4993 MB/s
raid6: sse2x2 gen() 7886 MB/s
raid6: sse2x2 xor() 5537 MB/s
raid6: sse2x4 gen() 9187 MB/s
raid6: sse2x4 xor() 6666 MB/s
raid6: using algorithm sse2x4 gen() 9187 MB/s
raid6: .... xor() 6666 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 12780.000 MB/sec
generic_sse: 11653.000 MB/sec
xor: using function: prefetch64-sse (12780.000 MB/sec)
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
random: nonblocking pool is initialized
Btrfs loaded
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting Set console keymap...
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on udev Control Socket.
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
systemd[1]: Starting Nameserver information manager...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Mounting Huge Pages File System...
Loading iSCSI transport class v2.0-870.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Service...
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
iscsi: registered transport (tcp)
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Started Read required files in advance.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Uncomplicated firewall.
iscsi: registered transport (iser)
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Started Set console keymap.
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Journal Service.
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd-journald[515]: Received request to flush runtime journal from PID 1
ACPI Warning: SystemIO range 0x0000000000000928-0x000000000000092F conflicts with OpRegion 0x0000000000000920-0x000000000000092F (\SGPE) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EDAC MC: Ver: 3.0.0
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ipmi message handler version 39.2
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
ipmi_si IPI0001:00: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
ipmi_si IPI0001:00: IPMI kcs interface initialized
IPMI SSIF Interface driver
gpio_ich: GPIO from 436 to 511 on gpio_ich
EXT4-fs (md0): mounting with "discard" option, but the device does not support discard
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (sdc1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sdc1): mounted filesystem without journal. Opts: (null)
zavl: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
SPL: Loaded module v0.6.5.6-0ubuntu4
ZFS: Loaded module v0.6.5.6-0ubuntu15, ZFS pool version 5000, ZFS filesystem version 5
Adding 4025852k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:4025852k FS
audit: type=1400 audit(1492170843.744:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1456 comm="apparmor_parser"
audit: type=1400 audit(1492170843.744:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1456 comm="apparmor_parser"
audit: type=1400 audit(1492170843.744:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1456 comm="apparmor_parser"
audit: type=1400 audit(1492170843.744:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1456 comm="apparmor_parser"
audit: type=1400 audit(1492170843.748:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1457 comm="apparmor_parser"
audit: type=1400 audit(1492170843.748:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=1455 comm="apparmor_parser"
audit: type=1400 audit(1492170843.748:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=1455 comm="apparmor_parser"
audit: type=1400 audit(1492170843.748:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=1455 comm="apparmor_parser"
audit: type=1400 audit(1492170843.748:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=1455 comm="apparmor_parser"
audit: type=1400 audit(1492170843.748:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lxd/lxd-bridge-proxy" pid=1458 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
bond0: Adding slave eno1
bond0: Enslaving eno1 as a backup interface with an up link
bond0: Adding slave eno2
bond0: Enslaving eno2 as a backup interface with an up link
ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20150930/exfield-418)
ACPI Error: Method parse/execution failed [\_SB.PMI0._PMM] (Node ffff88040b8af780), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20150930/power_meter-338)
cgroup: new mount options do not match the existing superblock, will be ignored
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 1/ON)
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: 1.3.3, timer margin: 30 seconds (nowayout=0).
tg3 0000:03:00.0 eno1: Link is up at 1000 Mbps, full duplex
tg3 0000:03:00.0 eno1: Flow control is off for TX and off for RX
tg3 0000:03:00.0 eno1: EEE is disabled
IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
tg3 0000:03:00.1 eno2: Link is up at 1000 Mbps, full duplex
tg3 0000:03:00.1 eno2: Flow control is off for TX and off for RX
tg3 0000:03:00.1 eno2: EEE is disabled
ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20150930/exfield-418)
ACPI Error: Method parse/execution failed [\_SB.PMI0._PMM] (Node ffff88040b8af780), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20150930/power_meter-338)
ACPI Error: SMBus/IPMI/GenericSerialBus write requires Buffer of length 66, found length 32 (20150930/exfield-418)
ACPI Error: Method parse/execution failed [\_SB.PMI0._PMM] (Node ffff88040b8af780), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20150930/power_meter-338)