dmesg - 10-year-old-PC

Return To 10-year-old-PC System Information

microcode: microcode updated early to revision 0xd0, date = 2010-09-30
Linux version 4.10.5-1-ARCH (builduser@tobias) (gcc version 6.3.1 20170306 (GCC) ) #1 SMP PREEMPT Wed Mar 22 14:42:03 CET 2017
x86/fpu: Legacy x87 FPU detected.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dfedffff] usable
BIOS-e820: [mem 0x00000000dfee0000-0x00000000dfee2fff] ACPI NVS
BIOS-e820: [mem 0x00000000dfee3000-0x00000000dfeeffff] ACPI data
BIOS-e820: [mem 0x00000000dfef0000-0x00000000dfefffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. P35-S3/P35-S3, BIOS F8 06/19/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CDFFF write-protect
  CE000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 0E0000000 mask FE0000000 uncachable
  2 base 100000000 mask FE0000000 write-back
  3 base 0DFF00000 mask FFFF00000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: update [mem 0xdff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5500-0x000f550f] mapped at [ffff8800000f5500]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
BRK [0x01d5f000, 0x01d5ffff] PGTABLE
BRK [0x01d60000, 0x01d60fff] PGTABLE
BRK [0x01d61000, 0x01d61fff] PGTABLE
BRK [0x01d62000, 0x01d62fff] PGTABLE
RAMDISK: [mem 0x372e3000-0x37968fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6EC0 000014 (v00 GBT   )
ACPI: RSDT 0x00000000DFEE3040 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000DFEE30C0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000DFEE3180 004BCB (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 0x00000000DFEE0000 000040
ACPI: HPET 0x00000000DFEE7EC0 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000DFEE7F40 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 0x00000000DFEE7DC0 000084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 0x00000000DFEE85E0 0003AB (v01 PmRef  CpuPm    00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
NODE_DATA(0) allocated [mem 0x11fff7000-0x11fffbfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000011fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000dfedffff]
  node   0: [mem 0x0000000100000000-0x000000011fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
On node 0 totalpages: 1048190
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 14268 pages used for memmap
  DMA32 zone: 913120 pages, LIFO batch:31
  Normal zone: 2048 pages used for memmap
  Normal zone: 131072 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdfee0000-0xdfee2fff]
PM: Registered nosave memory: [mem 0xdfee3000-0xdfeeffff]
PM: Registered nosave memory: [mem 0xdfef0000-0xdfefffff]
PM: Registered nosave memory: [mem 0xdff00000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xdff00000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff88011fc00000 s103640 r8192 d31528 u524288
pcpu-alloc: s103640 r8192 d31528 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031789
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4040136K/4192760K available (6350K kernel code, 1091K rwdata, 1980K rodata, 1292K init, 1032K bss, 152624K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:8448 nr_irqs:456 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3499.933 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7002.52 BogoMIPS (lpj=11666443)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 24K
ftrace: allocating 25114 entries in 99 pages
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 CPU          6320  @ 1.86GHz (family: 0x6, model: 0xf, stepping: 0x6)
Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
core: PEBS disabled due to CPU errata
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
smp: Brought up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (14005.23 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee2fff] (12288 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 11:12:47, date: 04/02/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88011A548000 00022A (v01 PmRef  Cpu0Ist  00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88011A546800 000152 (v01 PmRef  Cpu1Ist  00003000 INTL 20040311)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xdff00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-3f]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io  0xe100-0xe11f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io  0xe200-0xe21f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io  0xe000-0xe01f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfa205000-0xfa2053ff]
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfa200000-0xfa203fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0xe300-0xe31f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0xe400-0xe41f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0xe500-0xe51f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfa204000-0xfa2043ff]
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018a
pci 0000:00:1f.2: reg 0x10: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 0x14: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 0x18: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 0x1c: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 0x20: [io  0xf000-0xf00f]
pci 0000:00:1f.2: reg 0x24: [io  0xf100-0xf10f]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfa206000-0xfa2060ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io  0xe700-0xe707]
pci 0000:00:1f.5: reg 0x14: [io  0xe800-0xe803]
pci 0000:00:1f.5: reg 0x18: [io  0xe900-0xe907]
pci 0000:00:1f.5: reg 0x1c: [io  0xea00-0xea03]
pci 0000:00:1f.5: reg 0x20: [io  0xeb00-0xeb0f]
pci 0000:00:1f.5: reg 0x24: [io  0xec00-0xec0f]
pci 0000:01:00.0: [10de:0622] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf4000000-0xf5ffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io  0xb000-0xb07f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
pci 0000:03:00.0: reg 0x24: [mem 0xfa000000-0xfa001fff]
pci 0000:03:00.0: PME# supported from D3hot
pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
pci 0000:03:00.1: reg 0x10: [io  0xc000-0xc007]
pci 0000:03:00.1: reg 0x14: [io  0xc100-0xc103]
pci 0000:03:00.1: reg 0x18: [io  0xc200-0xc207]
pci 0000:03:00.1: reg 0x1c: [io  0xc300-0xc303]
pci 0000:03:00.1: reg 0x20: [io  0xc400-0xc40f]
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfa0fffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xf9000000-0xf9000fff 64bit]
pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:05:01.0: [1814:0301] type 00 class 0x028000
pci 0000:05:01.0: reg 0x10: [mem 0xfa100000-0xfa107fff]
pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfa100000-0xfa1fffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xdff00000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfee0000-0xdfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io  0x04d0-0x04d1] has been reserved
system 00:00: [io  0x0290-0x029f] has been reserved
system 00:00: [io  0x0800-0x087f] has been reserved
system 00:00: [io  0x0290-0x0294] has been reserved
system 00:00: [io  0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 2]
pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:05: [io  0x0400-0x04bf] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x000ce000-0x000cffff] has been reserved
system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:07: [mem 0xdfee0000-0xdfefffff] could not be reserved
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x00100000-0xdfedffff] could not be reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
system 00:07: [mem 0x000e0000-0x000effff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xfa300000-0xfa4fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xfa500000-0xfa6fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xfa700000-0xfa8fffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xfa900000-0xfaafffff 64bit pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf7000000-0xf707ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.0:   bridge window [mem 0xfa300000-0xfa4fffff]
pci 0000:00:1c.0:   bridge window [mem 0xfa500000-0xfa6fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfa0fffff]
pci 0000:00:1c.3:   bridge window [mem 0xfa700000-0xfa8fffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.4:   bridge window [mem 0xfa900000-0xfaafffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05]
pci 0000:00:1e.0:   bridge window [mem 0xfa100000-0xfa1fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xfa300000-0xfa4fffff]
pci_bus 0000:02: resource 2 [mem 0xfa500000-0xfa6fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfa0fffff]
pci_bus 0000:03: resource 2 [mem 0xfa700000-0xfa8fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:04: resource 2 [mem 0xfa900000-0xfaafffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xfa100000-0xfa1fffff]
pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue
pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 6680K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdbee0000-0xdfee0000] (64MB) mapped at [ffff8800dbee0000-ffff8800dfedffff]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=20 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf5000000, mapped to 0xffffc90001000000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 15
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
microcode: sig=0x6f6, pf=0x1, revision=0xd0
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
  Magic number: 13:469:225
rtc_cmos 00:01: setting system clock to 2017-04-02 11:12:47 UTC (1491131567)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1292K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1828K
Freeing unused kernel memory: 68K
random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfa205000
SCSI subsystem initialized
libata version 3.00 loaded.
pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
scsi host0: pata_jmicron
scsi host1: pata_jmicron
ata1: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16
ata2: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16
ahci 0000:03:00.0: version 3.0
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfa204000
scsi host2: ahci
scsi host3: ahci
ata3: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000100 irq 19
ata4: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000180 irq 19
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
Floppy drive(s): fd0 is 1.44M
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
scsi host4: ata_piix
scsi host5: ata_piix
ata5: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata6: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host6: ata_piix
scsi host7: ata_piix
ata7: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19
ata8: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19
FDC 0 is a post-1991 82077
serio: i8042 KBD port at 0x60,0x64 irq 1
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
usb 3-1: new low-speed USB device number 2 using uhci_hcd
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: HPA detected: current 1953523055, native 1953525168
ata5.00: ATA-10: ST1000LM035-1RK172, SDM1, max UDMA/133
ata5.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      ST1000LM035-1RK1 SDM1 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:0:0: [sda] 4096-byte physical blocks
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 4:0:0:0: [sda] Attached SCSI disk
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:0458:003A.0001/input/input1
hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1a.0-1/input0
tsc: Refined TSC clocksource calibration: 3499.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32734f9ce42, max_idle_ns: 440795224466 ns
usb 4-2: new low-speed USB device number 2 using uhci_hcd
random: fast init done
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
clocksource: Switched to clocksource tsc
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting Debug File System...
systemd[1]: Created slice system-getty.slice.
EXT4-fs (sda1): re-mounted. Opts: data=ordered
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 2 processor cores
vboxdrv: fAsync=0 offMin=0x3f7 offMax=0xea1
vboxdrv: TSC mode is Synchronous, tentative frequency 3499998460 Hz
vboxdrv: Successfully loaded version 5.1.18 (interface 0x00280000)
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
random: crng init done
systemd-journald[186]: Received request to flush runtime journal from PID 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889A: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D2:    inputs:
snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
snd_hda_codec_realtek hdaudioC0D2:      CD=0x1c
snd_hda_codec_realtek hdaudioC0D2:    dig-in=0x1f
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0 eth0: RTL8168b/8111b at 0xffffc90000699000, 00:1a:4d:48:97:6b, XID 18000000 IRQ 29
r8169 0000:04:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[drm] Initialized
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
input: PC Speaker as /devices/platform/pcspkr/input/input12
ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.102  Mon Jan 16 13:06:29 PST 2017

coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
intel_powerclamp: No package C-state available
intel_powerclamp: No package C-state available
gpio_ich: GPIO from 451 to 511 on gpio_ich
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ppdev: user-space parallel port driver
rt61pci 0000:05:01.0 wlp5s1: renamed from wlan0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/0003:046D:C512.0002/input/input13
r8169 0000:04:00.0 enp4s0: renamed from eth0
logitech 0003:046D:C512.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.1-2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/0003:046D:C512.0003/input/input14
logitech 0003:046D:C512.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-2/input1
mousedev: PS/2 mouse device common for all mice
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
it87: Found IT8718F chip at 0x290, revision 4
it87: Beeping is supported
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8
IPv6: ADDRCONF(NETDEV_UP): wlp5s1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp5s1: link is not ready
wlp5s1: authenticate with 68:72:51:3e:93:d5
wlp5s1: send auth to 68:72:51:3e:93:d5 (try 1/3)
wlp5s1: authenticated
wlp5s1: associate with 68:72:51:3e:93:d5 (try 1/3)
wlp5s1: RX AssocResp from 68:72:51:3e:93:d5 (capab=0x431 status=0 aid=1)
IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s1: link becomes ready
wlp5s1: associated
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 12
perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 4
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 14
perf: interrupt took too long (3135 > 3130), lowering kernel.perf_event_max_sample_rate to 63600
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 15
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 28
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 30
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 20
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 10
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 22
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 14
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 24
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 16
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 1
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 20
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 22
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 28
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 11
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 13
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 20
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 30
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 13
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 27
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 6
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 6
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 0
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 2
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 21
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 22
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 13
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 22
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 13
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 22
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 2
perf: interrupt took too long (3935 > 3918), lowering kernel.perf_event_max_sample_rate to 50700
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 4
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 27
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 29
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 24
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 9
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 2
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 18
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 13
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 6
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 8
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 21
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 24
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 0
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 7
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 30
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 0
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 20
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 30
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 8
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 10
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 18
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 24
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 21
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 24
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 13
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 17
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 18
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 4
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 20
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 15
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 17
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 28
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 12
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 0
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 19
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 10
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 21
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 2
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 25
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 18
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 20
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 9
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 1
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 3
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 9
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 15
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 30
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 11
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 21
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 18
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 31
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 1
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 0
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 2
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 30
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 5
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 12
ieee80211 phy0: rt61pci_txdone: Warning - TX status report missed for entry 14

Return To 10-year-old-PC System Information