dmesg - PAT001
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-66-lowlatency (buildd@lgw01-28) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #87-Ubuntu SMP PREEMPT Fri Mar 3 16:43:09 UTC 2017 (Ubuntu 4.4.0-66.87-lowlatency 4.4.44)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 00bd800000
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ba866fff] usable
BIOS-e820: [mem 0x00000000ba867000-0x00000000bab42fff] reserved
BIOS-e820: [mem 0x00000000bab43000-0x00000000bab52fff] ACPI data
BIOS-e820: [mem 0x00000000bab53000-0x00000000bb956fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb957000-0x00000000bca33fff] reserved
BIOS-e820: [mem 0x00000000bca34000-0x00000000bca34fff] usable
BIOS-e820: [mem 0x00000000bca35000-0x00000000bcc3afff] ACPI NVS
BIOS-e820: [mem 0x00000000bcc3b000-0x00000000bd082fff] usable
BIOS-e820: [mem 0x00000000bd083000-0x00000000bd7f3fff] reserved
BIOS-e820: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./M5A99FX PRO R2.0, BIOS 2501 04/07/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BD800000 mask FFFFFF800000 uncachable
3 base 0000BE000000 mask FFFFFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3032MB, range: 8MB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
total RAM covered: 3032M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3032MB, range: 8MB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x021fd000, 0x021fdfff] PGTABLE
BRK [0x021fe000, 0x021fefff] PGTABLE
BRK [0x021ff000, 0x021fffff] PGTABLE
BRK [0x02200000, 0x02200fff] PGTABLE
BRK [0x02201000, 0x02201fff] PGTABLE
BRK [0x02202000, 0x02202fff] PGTABLE
RAMDISK: [mem 0x33140000-0x35897fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BAB4A070 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BAB51120 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
ACPI: DSDT 0x00000000BAB4A158 006FC3 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BB951F80 000040
ACPI: APIC 0x00000000BAB51230 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BAB512D0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BAB51318 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000BAB51358 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000BAB513E8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
NODE_DATA(0) allocated [mem 0x23eff5000-0x23eff9fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000ba866fff]
node 0: [mem 0x00000000bca34000-0x00000000bca34fff]
node 0: [mem 0x00000000bcc3b000-0x00000000bd082fff]
node 0: [mem 0x00000000bd7f4000-0x00000000bd7fffff]
node 0: [mem 0x0000000100001000-0x000000023effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
On node 0 totalpages: 2071640
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 11891 pages used for memmap
DMA32 zone: 761020 pages, LIFO batch:31
Normal zone: 20416 pages used for memmap
Normal zone: 1306623 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xba867000-0xbab42fff]
PM: Registered nosave memory: [mem 0xbab43000-0xbab52fff]
PM: Registered nosave memory: [mem 0xbab53000-0xbb956fff]
PM: Registered nosave memory: [mem 0xbb957000-0xbca33fff]
PM: Registered nosave memory: [mem 0xbca35000-0xbcc3afff]
PM: Registered nosave memory: [mem 0xbd083000-0xbd7f3fff]
PM: Registered nosave memory: [mem 0xbd800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbd800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 34 pages/cpu @ffff88023ec00000 s98648 r8192 d32424 u262144
pcpu-alloc: s98648 r8192 d32424 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2039248
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xb0000000-0xb3ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xb0000000-0xb3ffffff]
Memory: 7963700K/8286560K available (8506K kernel code, 1297K rwdata, 3980K rodata, 1428K init, 1316K bss, 322860K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:1032 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4013.425 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8026.85 BogoMIPS (lpj=4013425)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff820ab000 - ffffffff820b2000)
ftrace: allocating 32121 entries in 126 pages
smpboot: APIC(10) Converting physical 1 to logical package 0
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64214.80 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbab53000-0xbb956fff] (14696448 bytes)
PM: Registering ACPI NVS region [mem 0xbca35000-0xbcc3afff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 13:15:04, date: 03/25/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: System wakeup disabled by ACPI
pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
pci 0000:00:15.3: supports D1 D2
pci 0000:00:15.3: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1002:67df] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:0b.0: PCI bridge to [bus 03]
pci 0000:00:0d.0: PCI bridge to [bus 04]
pci 0000:05:05.0: [13f6:8788] type 00 class 0x040100
pci 0000:05:05.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:05:05.0: supports D1 D2
pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
pci 0000:06:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:06:00.0: reg 0x10: [io 0xc050-0xc057]
pci 0000:06:00.0: reg 0x14: [io 0xc040-0xc043]
pci 0000:06:00.0: reg 0x18: [io 0xc030-0xc037]
pci 0000:06:00.0: reg 0x1c: [io 0xc020-0xc023]
pci 0000:06:00.0: reg 0x20: [io 0xc000-0xc01f]
pci 0000:06:00.0: reg 0x24: [mem 0xfe900000-0xfe9001ff]
pci 0000:00:15.0: PCI bridge to [bus 06]
pci 0000:00:15.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 07]
pci 0000:00:15.1: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:08:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit]
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:00:15.2: PCI bridge to [bus 08]
pci 0000:00:15.2: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:09:00.0: reg 0x10: [io 0xb000-0xb0ff]
pci 0000:09:00.0: reg 0x18: [mem 0xd0304000-0xd0304fff 64bit pref]
pci 0000:09:00.0: reg 0x20: [mem 0xd0300000-0xd0303fff 64bit pref]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.3: PCI bridge to [bus 09]
pci 0000:00:15.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:15.3: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xba867000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbca35000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd083000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x02af] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:0b.0: PCI bridge to [bus 03]
pci 0000:00:0d.0: PCI bridge to [bus 04]
pci 0000:00:14.4: PCI bridge to [bus 05]
pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:15.0: PCI bridge to [bus 06]
pci 0000:00:15.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:15.1: PCI bridge to [bus 07]
pci 0000:00:15.1: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:15.2: PCI bridge to [bus 08]
pci 0000:00:15.2: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:15.3: PCI bridge to [bus 09]
pci 0000:00:15.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:15.3: bridge window [mem 0xd0300000-0xd03fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:05: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:05: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:05: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:07: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:08: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:09: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:09: resource 2 [mem 0xd0300000-0xd03fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 40288K (ffff880033140000 - ffff880035898000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b0000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1490447703.860:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-66-lowlatency ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 21, io mem 0xfeb07000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-66-lowlatency ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 23, io mem 0xfeb04000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-66-lowlatency ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.4.0-66-lowlatency ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 20, io mem 0xfeb08000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.4.0-66-lowlatency ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.4.0-66-lowlatency ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:16.0: irq 22, io mem 0xfeb05000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.4.0-66-lowlatency ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 8
xhci_hcd 0000:07:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.4.0-66-lowlatency xhci-hcd
usb usb8: SerialNumber: 0000:07:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 9
usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 4.4.0-66-lowlatency xhci-hcd
usb usb9: SerialNumber: 0000:07:00.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 10
usb 1-3: new high-speed USB device number 2 using ehci-pci
xhci_hcd 0000:08:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 4.4.0-66-lowlatency xhci-hcd
usb usb10: SerialNumber: 0000:08:00.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 11
usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 4.4.0-66-lowlatency xhci-hcd
usb usb11: SerialNumber: 0000:08:00.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x06000822
microcode: CPU1: patch_level=0x06000822
microcode: CPU2: patch_level=0x06000822
microcode: CPU3: patch_level=0x06000822
microcode: CPU4: patch_level=0x06000822
microcode: CPU5: patch_level=0x06000822
microcode: CPU6: patch_level=0x06000822
microcode: CPU7: patch_level=0x06000822
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 4b76638b48763efbc9d045cebb05360413a00dd8'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 9:956:281
tty tty18: hash matches
rtc_cmos 00:03: setting system clock to 2017-03-25 13:15:05 UTC (1490447705)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1428K (ffffffff81f46000 - ffffffff820ab000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1724K (ffff880001851000 - ffff880001a00000)
Freeing unused kernel memory: 116K (ffff880001de3000 - ffff880001e00000)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
[drm] Initialized drm 1.1.0 20060810
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19
ahci 0000:06:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:06:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xfe900000 port 0xfe900100 irq 42
ata8: SATA max UDMA/133 abar m512@0xfe900000 port 0xfe900180 irq 42
usb 1-3: New USB device found, idVendor=0424, idProduct=2514
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:09:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:09:00.0 eth0: RTL8168f/8111f at 0xffffc90000e7c000, ac:22:0b:4d:5d:c3, XID 08000800 IRQ 43
r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
amdkcl: module verification failed: signature and/or required key missing - tainting kernel
Could not create tracefs 'fence_wait_end' directory
Could not create tracefs 'fence_wait_start' directory
Could not create tracefs 'fence_signaled' directory
Could not create tracefs 'fence_enable_signal' directory
Could not create tracefs 'fence_destroy' directory
Could not create tracefs 'fence_init' directory
Could not create tracefs 'fence_emit' directory
Could not create tracefs 'fence_annotate_wait_on' directory
r8169 0000:09:00.0 enp9s0: renamed from eth0
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
fb: switching to amdgpudrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1043:0x0505 0xC7).
[drm] register mmio base: 0xFEA00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xD0000000
[drm] doorbell mmio size: 2097152
[drm] probing gen 2 caps for device 1002:5a16 = 33ed02/0
[drm] probing mlw for device 1002:5a16 = 33ed02
[drm] UVD is enabled in VM mode
[drm] VCE enabled in VM mode
amdgpu 0000:01:00.0: Invalid ROM contents
ATOM BIOS: 67DFHB.15.50.0.0.AS18
[drm] GPU post is not needed
amdgpu 0000:01:00.0: VRAM: 8192M 0x0000000000000000 - 0x00000001FFFFFFFF (8192M used)
amdgpu 0000:01:00.0: GTT: 8192M 0x0000000200000000 - 0x00000003FFFFFFFF
[drm] Detected VRAM RAM=8192M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 4036618 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 8192M of VRAM memory ready
[drm] amdgpu: 8192M of GTT memory ready.
[drm] GART: num cpu pages 2097152, num gpu pages 2097152
[drm] PCIE GART of 8192M enabled (table at 0x0000000000040000).
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: powerplay initialized
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000200000008, cpu addr 0xffff8800ba34f008
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000200000018, cpu addr 0xffff8800ba34f018
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000200000028, cpu addr 0xffff8800ba34f028
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000200000038, cpu addr 0xffff8800ba34f038
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000200000048, cpu addr 0xffff8800ba34f048
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000200000058, cpu addr 0xffff8800ba34f058
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000200000068, cpu addr 0xffff8800ba34f068
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000200000078, cpu addr 0xffff8800ba34f078
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000200000088, cpu addr 0xffff8800ba34f088
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x0000000200000098, cpu addr 0xffff8800ba34f098
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000002000000a8, cpu addr 0xffff8800ba34f0a8
[drm] Found UVD firmware Version: 1.79 Family ID: 16
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x000000000109c420, cpu addr 0xffffc90001a5a420
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x00000002000000c8, cpu addr 0xffff8800ba34f0c8
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000002000000d8, cpu addr 0xffff8800ba34f0d8
usb 5-1: new full-speed USB device number 2 using ohci-pci
[AVFS] Something is broken. See log!
[drm] DAL is enabled
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 30000
[drm] DM_PPLIB: 60800
[drm] DM_PPLIB: 91000
[drm] DM_PPLIB: 111000
[drm] DM_PPLIB: 118000
[drm] DM_PPLIB: 122700
[drm] DM_PPLIB: 127400
[drm] DM_PPLIB: 130500
[drm] DM_PPLIB: Warning: using default validation clocks!
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 72000
[drm] DM_PPLIB: memory_max_clock: 80000
[drm] DM_PPLIB: level : 0
[drm] DM_PPLIB: reducing engine clock level from 8 to 3
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 30000
[drm] DM_PPLIB: 200000
[drm] DM_PPLIB: Warning: using default validation clocks!
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 72000
[drm] DM_PPLIB: memory_max_clock: 80000
[drm] DM_PPLIB: level : 0
[drm] DM_PPLIB: reducing memory clock level from 2 to 2
[drm] DC: create_links: connectors_num: physical:5, virtual:0
[drm] Connector[0] description:signal 32
[drm] Using channel: CHANNEL_ID_DDC2 [2]
[drm] Connector[1] description:signal 32
[drm] Using channel: CHANNEL_ID_DDC4 [4]
[drm] Connector[2] description:signal 4
[drm] Using channel: CHANNEL_ID_DDC1 [1]
[drm] Connector[3] description:signal 4
[drm] Using channel: CHANNEL_ID_DDC3 [3]
[drm] Connector[4] description:signal 2
[drm] Using channel: CHANNEL_ID_DDC6 [6]
[drm] Display Core initialized
[drm] amdgpu: freesync_module init done ffff88023312e860.
[drm] link=0, dc_sink_in= (null) is now Disconnected
[drm] DCHPD: connector_id=0: dc_sink didn't change.
[drm] link=1, dc_sink_in= (null) is now Disconnected
[drm] DCHPD: connector_id=1: dc_sink didn't change.
[drm] [Detect] [HDMIA][ConnIdx:2] e2752Vq: [Block 0] 00 FF FF FF FF FF FF 00 05 E3 52 27 2D 02 00 00 24 17 01 03 80 3C 22 78 2A B2 05 A3 56 4F 9E 28 0F 50 54 BF EF 00 D1 C0 B3 00 95 00 81 80 81 40 81 C0 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C 45 00 56 50 21 00 00 1E 00 00 00 FD 00 32 4C 1E 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 65 32 37 35 32 56 71 0A 20 20 20 20 20 00 00 00 FF 00 45 47 50 44 39 4A 41 30 30 30 35 35 37 01 9B ^
[drm] [Detect] [HDMIA][ConnIdx:2] e2752Vq: [Block 1] 02 03 1E F1 4B 05 14 10 1F 04 13 03 12 02 11 01 23 09 07 01 83 01 00 00 65 03 0C 00 10 00 8C 0A D0 8A 20 E0 2D 10 10 3E 96 00 56 50 21 00 00 18 01 1D 00 72 51 D0 1E 20 6E 28 55 00 56 50 21 00 00 1E 8C 0A D0 8A 20 E0 2D 10 10 3E 96 00 56 50 21 00 00 18 8C 0A D0 90 20 40 31 20 0C 40 55 00 56 50 21 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 17 ^
[drm] dc_link_detect: manufacturer_id = E305, product_id = 2752, serial_number = 22D, manufacture_week = 36, manufacture_year = 23, display_name = e2752Vq, speaker_flag = 1, audio_mode_count = 1
[drm] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 7, sample_size = 1
[drm] link=2, dc_sink_in=ffff8800ba10b800 is now Connected
[drm] DCHPD: connector_id=2: Old sink= (null) New sink=ffff8800ba10b800
[drm:log_to_debug_console [amdgpu]] *ERROR* No EDID read.
[drm] link=4, dc_sink_in= (null) is now Disconnected
[drm] DCHPD: connector_id=4: dc_sink didn't change.
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] KMS initialized.
[drm] ring test on 0 succeeded in 14 usecs
[drm] ring test on 1 succeeded in 26 usecs
[drm] ring test on 2 succeeded in 28 usecs
[drm] ring test on 3 succeeded in 8 usecs
[drm] ring test on 4 succeeded in 11 usecs
[drm] ring test on 5 succeeded in 9 usecs
[drm] ring test on 6 succeeded in 12 usecs
[drm] ring test on 7 succeeded in 12 usecs
[drm] ring test on 8 succeeded in 12 usecs
[drm] ring test on 9 succeeded in 6 usecs
[drm] ring test on 10 succeeded in 6 usecs
usb 8-2: new high-speed USB device number 2 using xhci_hcd
[drm] ring test on 11 succeeded in 1 usecs
[drm] UVD initialized successfully.
usb 5-1: New USB device found, idVendor=03f0, idProduct=7604
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: Deskjet 3900
usb 5-1: Manufacturer: HP
usb 5-1: SerialNumber: CN5BJ1H5PB048H
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
[drm] ring test on 12 succeeded in 9 usecs
[drm] ring test on 13 succeeded in 4 usecs
[drm] VCE initialized successfully.
[drm] fb mappable at 0xC136F000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] Initialized amdgpu 3.9.0 20150101 for 0000:01:00.0 on minor 0
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: SanDisk SDSSDHII120G, X31200RL, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDHII 00RL PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-H62N, CL00, max UDMA/100
ata2.00: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/100
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP2504C 0-33 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 8-2: New USB device found, idVendor=0409, idProduct=005a
usb 8-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-2:1.0: USB hub found
hub 8-2:1.0: 3 ports detected
ata4.00: ATA-9: ST1000DX001-1CM162, CC44, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD5000AACS-00G8B0, 05.04C05, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD5000AACS-0 4C05 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST1000DX001-1CM1 CC44 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 4013.503 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39da2ff76e9, max_idle_ns: 440795251226 ns
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H62N CL00 PQ: 0 ANSI: 5
sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg4 type 5
usb 8-2.1: new low-speed USB device number 3 using xhci_hcd
usb 8-2.1: New USB device found, idVendor=045e, idProduct=0040
usb 8-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 8-2.1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
usb 8-2.1: Manufacturer: Microsoft
usb 8-2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:15.1/0000:07:00.0/usb8/8-2/8-2.1/8-2.1:1.0/0003:045E:0040.0001/input/input5
hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:07:00.0-2.1/input0
usb 8-2.3: new low-speed USB device number 4 using xhci_hcd
ata8: SATA link down (SStatus 0 SControl 300)
random: nonblocking pool is initialized
usb 8-2.3: New USB device found, idVendor=1038, idProduct=0510
usb 8-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2.3: Product: Merc Stealth
usb 8-2.3: Manufacturer: Ideazon
usb 8-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 8-2.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: Ideazon Merc Stealth as /devices/pci0000:00/0000:00:15.1/0000:07:00.0/usb8/8-2/8-2.3/8-2.3:1.0/0003:1038:0510.0002/input/input6
hid-generic 0003:1038:0510.0002: input,hidraw1: USB HID v1.11 Keyboard [Ideazon Merc Stealth] on usb-0000:07:00.0-2.3/input0
input: Ideazon Merc Stealth as /devices/pci0000:00/0000:00:15.1/0000:07:00.0/usb8/8-2/8-2.3/8-2.3:1.1/0003:1038:0510.0003/input/input7
hid-generic 0003:1038:0510.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Ideazon Merc Stealth] on usb-0000:07:00.0-2.3/input1
clocksource: Switched to clocksource tsc
microcode: CPU0: new patch_level=0x0600084f
microcode: CPU2: new patch_level=0x0600084f
microcode: CPU4: new patch_level=0x0600084f
microcode: CPU6: new patch_level=0x0600084f
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Nameserver information manager...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Started Braille Device Support.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set console keymap...
systemd[1]: Reached target Slices.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Nameserver information manager.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Reached target Network (Pre).
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Journal Service.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[355]: Received request to flush runtime journal from PID 1
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Atomic commit: SET crtc id 0: [ffff88022fc27000]
[drm] dc_commit_targets: 1 targets
[drm] core_target 0x30218000: stream_count=1
[drm] core_stream 0x2f09f000: src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[drm] pix_clk_khz: 148500, h_total: 2200, v_total: 1125
[drm] link: 2
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F15h detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 2048MB 3: 2048MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 2048MB 3: 2048MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x4 syndromes.
EDAC amd64: MCT channel count: 2
EDAC MC0: Giving out device to module amd64_edac controller F15h: DEV 0000:00:18.2 (INTERRUPT)
EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[drm] [Mode] [HDMIA][ConnIdx:2] {1920x1080, 2200x1125@148500Khz}^
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input8
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input9
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input10
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input11
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input12
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input18
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input19
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input20
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input21
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
Adding 16001020k swap on /dev/sda5. Priority:-1 extents:1 across:16001020k SSFS
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input22
asus_wmi: Number of fans: 1
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1490447708.617:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1052 comm="apparmor_parser"
audit: type=1400 audit(1490447708.617:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1054 comm="apparmor_parser"
audit: type=1400 audit(1490447708.618:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1056 comm="apparmor_parser"
audit: type=1400 audit(1490447708.618:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1051 comm="apparmor_parser"
audit: type=1400 audit(1490447708.618:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1051 comm="apparmor_parser"
audit: type=1400 audit(1490447708.618:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1049 comm="apparmor_parser"
audit: type=1400 audit(1490447708.618:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1049 comm="apparmor_parser"
audit: type=1400 audit(1490447708.618:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1049 comm="apparmor_parser"
audit: type=1400 audit(1490447708.619:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1049 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
r8169 0000:09:00.0 enp9s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp9s0: link is not ready
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
usblp 5-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
usbcore: registered new interface driver usblp
r8169 0000:09:00.0 enp9s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp9s0: link becomes ready
usblp1: removed
usblp 5-1:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7604
Non-volatile memory driver v1.3
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000
[drm] dc_pre_update_surfaces_to_target: commit 1 surfaces to target 0x30218000