dmesg - joule-570x-rbench

Return To joule-570x-rbench System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-1000-joule (root@tangerine) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #0+joule02 SMP Wed Oct 5 08:02:23 UTC 2016 (Ubuntu 4.4.0-1000.0+joule02-joule 4.4.19)
Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-1000-joule root=/dev/mmcblk0p2 ro console=ttyS6,115200 maxcpus=4 noxsave reboot=efi kmemleak=off rootwait console=tty0 fsck.mode=skip rootflags=i_version i915.preliminary_hw_support=1 quiet splash vt.handoff=7
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: xstate_offset[3]:  960, xstate_sizes[3]:   64
x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]:   64
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
BIOS-e820: [mem 0x0000000010000000-0x0000000012550fff] reserved
BIOS-e820: [mem 0x0000000012551000-0x0000000078973fff] usable
BIOS-e820: [mem 0x0000000078974000-0x0000000078c35fff] reserved
BIOS-e820: [mem 0x0000000078c36000-0x0000000078d46fff] type 20
BIOS-e820: [mem 0x0000000078d47000-0x0000000078d9cfff] reserved
BIOS-e820: [mem 0x0000000078d9d000-0x0000000078dfcfff] ACPI NVS
BIOS-e820: [mem 0x0000000078dfd000-0x0000000078e3cfff] ACPI data
BIOS-e820: [mem 0x0000000078e3d000-0x0000000079df2fff] usable
BIOS-e820: [mem 0x0000000079df3000-0x0000000079df3fff] ACPI NVS
BIOS-e820: [mem 0x0000000079df4000-0x0000000079e1dfff] reserved
BIOS-e820: [mem 0x0000000079e1e000-0x000000007b3fffff] usable
BIOS-e820: [mem 0x000000007b400000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.50 by EDK II
efi:  ACPI=0x78e3c000  ACPI 2.0=0x78e3c014  ESRT=0x78d71000  SMBIOS=0x78b54000  SMBIOS 3.0=0x78b52000  PROP=0x790753d0 
efi: requested map not found.
esrt: ESRT header is not in the memory map.
SMBIOS 3.0.0 present.
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7F80000000 write-back
  1 base 007C000000 mask 7FFC000000 uncachable
  2 base 007B800000 mask 7FFF800000 uncachable
  3 base 007B400000 mask 7FFFC00000 uncachable
  4 base 0100000000 mask 7F80000000 write-back
  5 base 00FF800000 mask 70FF800000 write-combining
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: last_pfn = 0x7b400 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x03202000, 0x03202fff] PGTABLE
BRK [0x03203000, 0x03203fff] PGTABLE
BRK [0x03204000, 0x03204fff] PGTABLE
BRK [0x03205000, 0x03205fff] PGTABLE
BRK [0x03206000, 0x03206fff] PGTABLE
BRK [0x03207000, 0x03207fff] PGTABLE
RAMDISK: [mem 0x33986000-0x35cbafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000078E3C014 000024 (v02 INTEL )
ACPI: XSDT 0x0000000078E19188 0000F4 (v01 INTEL  EDK2     00000003 BRXT 01000013)
ACPI: FACP 0x0000000078E33000 00010C (v05 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: DSDT 0x0000000078E27000 007082 (v02 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: FACS 0x0000000078DFA000 000040
ACPI: UEFI 0x0000000078DFC000 000042 (v01 INTEL  EDK2     00000002 BRXT 01000013)
ACPI: DBG2 0x0000000078E3A000 000072 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: HPET 0x0000000078E38000 000038 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: LPIT 0x0000000078E37000 00005C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: APIC 0x0000000078E36000 000084 (v03 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: MCFG 0x0000000078E35000 00003C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: NPKT 0x0000000078E34000 000065 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: PRAM 0x0000000078E32000 000030 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
ACPI: SSDT 0x0000000078E2F000 002769 (v02 INTEL  DptfTab  00000003 BRXT 0100000D)
ACPI: SSDT 0x0000000078E26000 000A5D (v02 INTEL  RVPRtd3  00000003 BRXT 0100000D)
ACPI: SSDT 0x0000000078E25000 00023E (v02 INTEL  UsbCTabl 00000003 BRXT 0100000D)
ACPI: SSDT 0x0000000078E21000 0036A8 (v01 Intel_ Platform 00001000 INTL 20150818)
ACPI: SSDT 0x0000000078E20000 0003CA (v01 INTEL  EprmSdt0 00001000 INTL 20150818)
ACPI: EM_1 0x0000000078E1E000 000029 (v00 INTEL  OEM1     00000005 INTL 0100000D)
ACPI: OEM1 0x0000000078E1D000 000040 (v01 INTEL  ENRGYMGT 00000005 INTL 0100000D)
ACPI: PIDV 0x0000000078E1C000 0000DC (v02                 00000002 BRXT 0100000D)
ACPI: RSCI 0x0000000078E1B000 000030 (v02 INTEL  BOOTSRC  00000001 BRXT 0100000D)
ACPI: SSDT 0x0000000078E1F000 0004A5 (v02 PmRef  Cpu0Ist  00003000 INTL 20150818)
ACPI: SSDT 0x0000000078E1A000 00072B (v02 CpuRef CpuSsdt  00003000 INTL 20150818)
ACPI: SSDT 0x0000000078E3B000 00032D (v02 PmRef  Cpu0Tst  00003000 INTL 20150818)
ACPI: SSDT 0x0000000078E18000 00017C (v02 PmRef  ApTst    00003000 INTL 20150818)
ACPI: SSDT 0x0000000078E15000 002865 (v02 SaSsdt SaSsdt   00003000 INTL 20150818)
ACPI: FPDT 0x0000000078E14000 000044 (v01 INTEL  EDK2     00000002 BRXT 01000013)
ACPI: WDAT 0x0000000078E39000 000104 (v01                 00000000      00000000)
ACPI: NHLT 0x0000000078E12000 001CB1 (v00 INTEL  EDK2     00000002 BRXT 01000013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
NODE_DATA(0) allocated [mem 0x17fff8000-0x17fffcfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000017fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x0000000000057fff]
  node   0: [mem 0x0000000000059000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x000000000fffffff]
  node   0: [mem 0x0000000012551000-0x0000000078973fff]
  node   0: [mem 0x0000000078e3d000-0x0000000079df2fff]
  node   0: [mem 0x0000000079e1e000-0x000000007b3fffff]
  node   0: [mem 0x0000000100000000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
On node 0 totalpages: 1018199
  DMA zone: 64 pages used for memmap
  DMA zone: 22 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 7655 pages used for memmap
  DMA32 zone: 489915 pages, LIFO batch:31
  Normal zone: 8192 pages used for memmap
  Normal zone: 524288 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x7c000000-0x7fffffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: Registered nosave memory: [mem 0x10000000-0x12550fff]
PM: Registered nosave memory: [mem 0x78974000-0x78c35fff]
PM: Registered nosave memory: [mem 0x78c36000-0x78d46fff]
PM: Registered nosave memory: [mem 0x78d47000-0x78d9cfff]
PM: Registered nosave memory: [mem 0x78d9d000-0x78dfcfff]
PM: Registered nosave memory: [mem 0x78dfd000-0x78e3cfff]
PM: Registered nosave memory: [mem 0x79df3000-0x79df3fff]
PM: Registered nosave memory: [mem 0x79df4000-0x79e1dfff]
PM: Registered nosave memory: [mem 0x7b400000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: Registered nosave memory: [mem 0xfed02000-0xffffffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88017fc00000 s98008 r8192 d28968 u524288
pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1002266
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-1000-joule root=/dev/mmcblk0p2 ro console=ttyS6,115200 maxcpus=4 noxsave reboot=efi kmemleak=off rootwait console=tty0 fsck.mode=skip rootflags=i_version i915.preliminary_hw_support=1 quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3828808K/4072796K available (8432K kernel code, 1287K rwdata, 3980K rodata, 1480K init, 1292K bss, 243988K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1024 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
hpet clockevent registered
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 1689.576 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3379.20 BogoMIPS (lpj=6758400)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 11 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff820b5000 - ffffffff820bd000)
ftrace: allocating 32137 entries in 126 pages
smpboot: Max logical packages: 1
smpboot: APIC(0) Converting physical 0 to logical package 0
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Atom(TM) Processor T5700 @ 1.70GHz (family: 0x6, model: 0x5c, stepping: 0x2)
Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
... version:                4
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2 #3
Skipped synchronization checks as TSC is reliable.
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (13516.80 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x78d9d000-0x78dfcfff] (393216 bytes)
PM: Registering ACPI NVS region [mem 0x79df3000-0x79df3fff] (4096 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 20:02:21, date: 03/23/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 5 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88017A687A00 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20150818)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88017A687C00 00015F (v02 PmRef  ApIst    00003000 INTL 20150818)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88017A681900 00008D (v02 PmRef  ApCst    00003000 INTL 20150818)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PXP] (on)
ACPI: Power Resource [PXP] (on)
ACPI: Power Resource [VANA] (off)
ACPI: Power Resource [VDIG] (off)
ACPI: Power Resource [VAF] (off)
ACPI: Power Resource [VIO] (off)
ACPI: Power Resource [VANA] (off)
ACPI: Power Resource [VDIG] (off)
ACPI: Power Resource [VAF] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io  0x0078-0x03ff window]
pci_bus 0000:00: root bus resource [io  0x0480-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1af0] type 00 class 0x060000
pci 0000:00:00.1: [8086:1a8c] type 00 class 0x118000
pci 0000:00:00.1: reg 0x10: [mem 0x92410000-0x92417fff 64bit]
pci 0000:00:02.0: [8086:1a84] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0x1000-0x103f]
pci 0000:00:03.0: [8086:1a88] type 00 class 0x048000
pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x91ffffff 64bit]
pci 0000:00:0e.0: [8086:1a98] type 00 class 0x040300
pci 0000:00:0e.0: reg 0x10: [mem 0x92418000-0x9241bfff 64bit]
pci 0000:00:0e.0: reg 0x20: [mem 0x92200000-0x922fffff 64bit]
pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0e.0: System wakeup disabled by ACPI
pci 0000:00:0f.0: [8086:1a9a] type 00 class 0x078000
pci 0000:00:0f.0: reg 0x10: [mem 0x9241c000-0x9241cfff 64bit]
pci 0000:00:0f.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:1ad6] type 01 class 0x060400
pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:15.0: [8086:1aa8] type 00 class 0x0c0330
pci 0000:00:15.0: reg 0x10: [mem 0x92400000-0x9240ffff 64bit]
pci 0000:00:15.0: PME# supported from D3hot D3cold
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [8086:1aaa] type 00 class 0x0c03fe
pci 0000:00:15.1: reg 0x10: [mem 0x92000000-0x921fffff 64bit]
pci 0000:00:15.1: reg 0x18: [mem 0x9241f000-0x9241ffff 64bit]
pci 0000:00:15.1: PME# supported from D0 D3hot
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1aac] type 00 class 0x118000
pci 0000:00:16.0: reg 0x10: [mem 0x92420000-0x92420fff 64bit]
pci 0000:00:16.0: reg 0x18: [mem 0x92421000-0x92421fff 64bit]
pci 0000:00:16.1: [8086:1aae] type 00 class 0x118000
pci 0000:00:16.1: reg 0x10: [mem 0x92422000-0x92422fff 64bit]
pci 0000:00:16.1: reg 0x18: [mem 0x92423000-0x92423fff 64bit]
pci 0000:00:16.2: [8086:1ab0] type 00 class 0x118000
pci 0000:00:16.2: reg 0x10: [mem 0x92424000-0x92424fff 64bit]
pci 0000:00:16.2: reg 0x18: [mem 0x92425000-0x92425fff 64bit]
pci 0000:00:16.3: [8086:1ab2] type 00 class 0x118000
pci 0000:00:16.3: reg 0x10: [mem 0x92426000-0x92426fff 64bit]
pci 0000:00:16.3: reg 0x18: [mem 0x92427000-0x92427fff 64bit]
pci 0000:00:17.0: [8086:1ab4] type 00 class 0x118000
pci 0000:00:17.0: reg 0x10: [mem 0x92428000-0x92428fff 64bit]
pci 0000:00:17.0: reg 0x18: [mem 0x92429000-0x92429fff 64bit]
pci 0000:00:17.1: [8086:1ab6] type 00 class 0x118000
pci 0000:00:17.1: reg 0x10: [mem 0x9242a000-0x9242afff 64bit]
pci 0000:00:17.1: reg 0x18: [mem 0x9242b000-0x9242bfff 64bit]
pci 0000:00:17.2: [8086:1ab8] type 00 class 0x118000
pci 0000:00:17.2: reg 0x10: [mem 0x9242c000-0x9242cfff 64bit]
pci 0000:00:17.2: reg 0x18: [mem 0x9242d000-0x9242dfff 64bit]
pci 0000:00:17.3: [8086:1aba] type 00 class 0x118000
pci 0000:00:17.3: reg 0x10: [mem 0x9242e000-0x9242efff 64bit]
pci 0000:00:17.3: reg 0x18: [mem 0x9242f000-0x9242ffff 64bit]
pci 0000:00:18.0: [8086:1abc] type 00 class 0x118000
pci 0000:00:18.0: reg 0x10: [mem 0x92430000-0x92430fff 64bit]
pci 0000:00:18.0: reg 0x18: [mem 0x92431000-0x92431fff 64bit]
pci 0000:00:18.1: [8086:1abe] type 00 class 0x118000
pci 0000:00:18.1: reg 0x10: [mem 0x92432000-0x92432fff 64bit]
pci 0000:00:18.1: reg 0x18: [mem 0x92433000-0x92433fff 64bit]
pci 0000:00:18.2: [8086:1ac0] type 00 class 0x118000
pci 0000:00:18.2: reg 0x10: [mem 0x92434000-0x92434fff 64bit]
pci 0000:00:18.2: reg 0x18: [mem 0x92435000-0x92435fff 64bit]
pci 0000:00:18.3: [8086:1aee] type 00 class 0x118000
pci 0000:00:18.3: reg 0x10: [mem 0x92436000-0x92436fff 64bit]
pci 0000:00:18.3: reg 0x18: [mem 0x92437000-0x92437fff 64bit]
pci 0000:00:19.0: [8086:1ac2] type 00 class 0x118000
pci 0000:00:19.0: reg 0x10: [mem 0x92438000-0x92438fff 64bit]
pci 0000:00:19.0: reg 0x18: [mem 0x92439000-0x92439fff 64bit]
pci 0000:00:19.1: [8086:1ac4] type 00 class 0x118000
pci 0000:00:19.1: reg 0x10: [mem 0x9243a000-0x9243afff 64bit]
pci 0000:00:19.1: reg 0x18: [mem 0x9243b000-0x9243bfff 64bit]
pci 0000:00:19.2: [8086:1ac6] type 00 class 0x118000
pci 0000:00:19.2: reg 0x10: [mem 0x9243c000-0x9243cfff 64bit]
pci 0000:00:19.2: reg 0x18: [mem 0x9243d000-0x9243dfff 64bit]
pci 0000:00:1a.0: [8086:1ac8] type 00 class 0x0c8000
pci 0000:00:1a.0: reg 0x10: [mem 0x9243e000-0x9243efff 64bit]
pci 0000:00:1a.0: reg 0x18: [mem 0x9243f000-0x9243ffff 64bit]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:1aca] type 00 class 0x080501
pci 0000:00:1b.0: reg 0x10: [mem 0x92440000-0x92440fff 64bit]
pci 0000:00:1b.0: reg 0x18: [mem 0x92441000-0x92441fff 64bit]
pci 0000:00:1c.0: [8086:1acc] type 00 class 0x080501
pci 0000:00:1c.0: reg 0x10: [mem 0x92442000-0x92442fff 64bit]
pci 0000:00:1c.0: reg 0x18: [mem 0x92443000-0x92443fff 64bit]
pci 0000:01:00.0: [8086:24f3] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0x92300000-0x92301fff 64bit]
pci 0000:01:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: PCI bridge to [bus 01]
pci 0000:00:14.0:   bridge window [mem 0x92300000-0x923fffff]
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x78974000-0x7bffffff]
e820: reserve RAM buffer [mem 0x79df3000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b400000-0x7bffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 19.200000 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:01: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:01: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:01: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:01: [mem 0xfed06000-0xfed06fff] has been reserved
system 00:01: [mem 0xfed08000-0xfed09fff] has been reserved
system 00:01: [mem 0xfed80000-0xfedbffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 2 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:14.0: PCI bridge to [bus 01]
pci 0000:00:14.0:   bridge window [mem 0x92300000-0x923fffff]
pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
pci_bus 0000:00: resource 6 [io  0x0078-0x03ff window]
pci_bus 0000:00: resource 7 [io  0x0480-0x0cf7 window]
pci_bus 0000:00: resource 8 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 10 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: resource 12 [mem 0x7c000001-0x7fffffff window]
pci_bus 0000:00: resource 13 [mem 0x80000000-0xcfffffff window]
pci_bus 0000:01: resource 1 [mem 0x92300000-0x923fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 36052K (ffff880033986000 - ffff880035cbb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x74974000-0x78974000] (64MB) mapped at [ffff880074974000-ffff880078973fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x185ac6cdb26, max_idle_ns: 440795262339 ns
clocksource: Switched to clocksource tsc
platform rtc_cmos: registered platform RTC device (no PNP device found)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1490299342.324:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:14.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0x80000000, mapped to 0xffffc90000800000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11242020
intel_idle: v0.4.1 model 0x5C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI Error: Could not enable PowerButton event (20150930/evxfevnt-212)
ACPI Warning: Could not enable fixed event - PowerButton (2) (20150930/evxface-654)
button: probe of LNXPWRBN:00 failed with error -22
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
idma64 idma64.0: Found Intel integrated DMA 64-bit
idma64 idma64.1: Found Intel integrated DMA 64-bit
idma64 idma64.2: Found Intel integrated DMA 64-bit
idma64 idma64.3: Found Intel integrated DMA 64-bit
idma64 idma64.4: Found Intel integrated DMA 64-bit
idma64 idma64.5: Found Intel integrated DMA 64-bit
idma64 idma64.6: Found Intel integrated DMA 64-bit
idma64 idma64.7: Found Intel integrated DMA 64-bit
idma64 idma64.8: Found Intel integrated DMA 64-bit
dw-apb-uart.8: ttyS4 at MMIO 0x92430000 (irq = 4, base_baud = 460800) is a 16550A
idma64 idma64.9: Found Intel integrated DMA 64-bit
dw-apb-uart.9: ttyS5 at MMIO 0x92432000 (irq = 5, base_baud = 460800) is a 16550A
console [ttyS6] disabled
dw-apb-uart.10: ttyS6 at MMIO 0x92434000 (irq = 6, base_baud = 460800) is a 16550A
console [ttyS6] enabled
dw-apb-uart.11: ttyS7 at MMIO 0x92436000 (irq = 7, base_baud = 460800) is a 16550A
idma64 idma64.12: Found Intel integrated DMA 64-bit
idma64 idma64.13: Found Intel integrated DMA 64-bit
idma64 idma64.14: Found Intel integrated DMA 64-bit
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-1000-joule xhci-hcd
usb usb1: SerialNumber: 0000:00:15.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-1000-joule xhci-hcd
usb usb2: SerialNumber: 0000:00:15.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb: port power management may be unreliable
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
ACPI Error: Could not enable RealTimeClock event (20150930/evxfevnt-212)
ACPI Warning: Could not enable fixed event - RealTimeClock (4) (20150930/evxface-654)
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x506c2, pf=0x1, revision=0x8
microcode: CPU1 sig=0x506c2, pf=0x1, revision=0x8
microcode: CPU2 sig=0x506c2, pf=0x1, revision=0x8
microcode: CPU3 sig=0x506c2, pf=0x1, revision=0x8
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 56890a3b20769b972892bcc731e2942c7fcaa4a5'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 9:792:43
rtc_cmos rtc_cmos: setting system clock to 2017-03-23 20:02:24 UTC (1490299344)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1480K (ffffffff81f43000 - ffffffff820b5000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1796K (ffff88000283f000 - ffff880002a00000)
Freeing unused kernel memory: 116K (ffff880002de3000 - ffff880002e00000)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
usb 1-2: new high-speed USB device number 2 using xhci_hcd
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:1aca] (rev c)
sdhci-pci 0000:00:1b.0: No vmmc regulator found
sdhci-pci 0000:00:1b.0: No vqmmc regulator found
mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit
[drm] Initialized drm 1.1.0 20060810
sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:1acc] (rev c)
sdhci-pci 0000:00:1c.0: No vmmc regulator found
sdhci-pci 0000:00:1c.0: No vqmmc regulator found
mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
usb 1-2: New USB device found, idVendor=0409, idProduct=005a
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 2 ports detected
Setting dangerous option preliminary_hw_support - tainting kernel
[drm] Memory usable by graphics device = 4096M
checking generic (80000000 7f0000) vs hw (80000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: [drm:broxton_ddi_phy_verify_state [i915]] DDI PHY state mismatch
i915 0000:00:02.0: Please file a bug at  against DRM/Intel providing the dmesg log by booting with drm.debug=0xf
i915 0000:00:02.0: [drm:broxton_ddi_phy_verify_state [i915]] DDI PHY state mismatch
i915 0000:00:02.0: [drm:broxton_ddi_phy_verify_state [i915]] DDI PHY state mismatch
[drm] Finished loading i915/bxt_dmc_ver1.bin (v1.7)
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-3: new full-speed USB device number 3 using xhci_hcd
usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
mmc1: new HS400 MMC card at address 0001
mmcblk0: mmc1:0001 016G32 14.7 GiB 
mmcblk0boot0: mmc1:0001 016G32 partition 1 4.00 MiB
mmcblk0boot1: mmc1:0001 016G32 partition 2 4.00 MiB
mmcblk0gp0: mmc1:0001 016G32 partition 4 4.00 MiB
mmcblk0gp3: mmc1:0001 016G32 partition 7 4.00 MiB
mmcblk0rpmb: mmc1:0001 016G32 partition 3 4.00 MiB
 mmcblk0: p1 p2
usb 1-2.1: new low-speed USB device number 4 using xhci_hcd
usb 1-2.1: New USB device found, idVendor=07c0, idProduct=015b
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1: Product: KeyWarrior Combo V
usb 1-2.1: Manufacturer: Code Mercenaries
usb 1-2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-2.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-2.2: new low-speed USB device number 5 using xhci_hcd
usb 1-2.2: New USB device found, idVendor=1267, idProduct=0003
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.2: Product: Touch Pad KTP3
usb 1-2.2: Manufacturer: K-Tech
usb 1-2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Code Mercenaries KeyWarrior Combo V as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:07C0:015B.0001/input/input1
hid-generic 0003:07C0:015B.0001: input,hidraw0: USB HID v1.10 Keyboard [Code Mercenaries KeyWarrior Combo V] on usb-0000:00:15.0-2.1/input0
input: Code Mercenaries KeyWarrior Combo V as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:07C0:015B.0002/input/input2
hid-generic 0003:07C0:015B.0002: input,hidraw1: USB HID v1.10 Mouse [Code Mercenaries KeyWarrior Combo V] on usb-0000:00:15.0-2.1/input1
input: K-Tech Touch Pad KTP3 as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:1267:0003.0003/input/input3
hid-generic 0003:1267:0003.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [K-Tech Touch Pad KTP3] on usb-0000:00:15.0-2.2/input0
[drm] failed to retrieve link info, disabling eDP
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
acpi device:44: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[drm] Initialized i915 1.6.0 20160411 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
ttyS6 - failed to request DMA
raid6: sse2x1   gen()  3666 MB/s
raid6: sse2x1   xor()  2201 MB/s
raid6: sse2x2   gen()  4225 MB/s
raid6: sse2x2   xor()  2575 MB/s
raid6: sse2x4   gen()  4828 MB/s
raid6: sse2x4   xor()  2237 MB/s
raid6: using algorithm sse2x4 gen() 4828 MB/s
raid6: .... xor() 2237 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
   prefetch64-sse:  6495.000 MB/sec
   generic_sse:  5739.000 MB/sec
xor: using function: prefetch64-sse (6495.000 MB/sec)
Btrfs loaded
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: i_version
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Journal Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set console keymap...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Read required files in advance.
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Reached target Slices.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Started Braille Device Support.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
systemd[1]: Started Remount Root and Kernel File Systems.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Started Journal Service.
[drm] RC6 on
systemd-journald[272]: Received request to flush runtime journal from PID 1
random: nonblocking pool is initialized
input: Intel HID events as /devices/platform/INT33D5:00/input/input5
pmc-ipc-plat INT34D2:00: io res: [io  0x0400-0x047f]
pmc-ipc-plat INT34D2:00: punit BIOS data res: [mem 0xfed17080-0xfed17083]
pmc-ipc-plat INT34D2:00: punit BIOS interface res: [mem 0xfed17084-0xfed17087]
pmc-ipc-plat INT34D2:00: ipc res: [mem 0xfe042000-0xfe043fff]
pmc-ipc-plat INT34D2:00: telemetry ssram res: [mem 0xfe900000-0xfe901fff]
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
nfc: nfc_init: NFC Core ver 0.1
NET: Registered protocol family 39
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
Bluetooth: hci0: Device revision is 5
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
hci_intel INT33E1:00: No IRQ, falling back to gpio-irq
hci_intel INT33E1:00: Unable to retrieve IRQ
hci_intel INT33E1:00: registered, gpio(443)/irq(-6).
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol BCM registered
Bluetooth: HCI UART protocol QCA registered
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-19.ucode failed with error -2
iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-18.ucode failed with error -2
iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-17.ucode failed with error -2
bq25890-charger i2c-BQ258900:00: Chip with ID=0, not supported!
iwlwifi 0000:01:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm
pwm-lpss 0000:00:1a.0: can't derive routing for PCI INT A
pwm-lpss 0000:00:1a.0: PCI INT A: no GSI
iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input6
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
SSE version of gcm_enc/dec engaged.
FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
i2c_hid i2c-ATML1000:00: hid_descr_cmd failed
input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input9
intel_telemetry_core Init
intel_punit_ipc intel_punit_ipc: Invalid IRQ, using polling mode
intel_punit_ipc intel_punit_ipc: can't request region for resource [mem 0x00000000]
intel_punit_ipc intel_punit_ipc: can't request region for resource [mem 0x00000000]
intel_punit_ipc intel_punit_ipc: can't request region for resource [mem 0x00000000]
intel_punit_ipc intel_punit_ipc: can't request region for resource [mem 0x00000000]
intel_telemetry: version 1.0.0 loaded
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
xhci-hcd xhci-hcd.2.auto: xHCI Host Controller
xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.2.auto: Host not halted after 16000 microseconds.
xhci-hcd xhci-hcd.2.auto: can't setup: -110
xhci-hcd xhci-hcd.2.auto: USB bus 3 deregistered
xhci-hcd: probe of xhci-hcd.2.auto failed with error -110
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
audit: type=1400 audit(1490299349.016:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=684 comm="apparmor_parser"
audit: type=1400 audit(1490299349.016:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=684 comm="apparmor_parser"
audit: type=1400 audit(1490299349.016:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=684 comm="apparmor_parser"
audit: type=1400 audit(1490299349.016:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=684 comm="apparmor_parser"
audit: type=1400 audit(1490299349.024:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=699 comm="apparmor_parser"
audit: type=1400 audit(1490299349.024:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=687 comm="apparmor_parser"
audit: type=1400 audit(1490299349.024:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=687 comm="apparmor_parser"
audit: type=1400 audit(1490299349.028:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=683 comm="apparmor_parser"
audit: type=1400 audit(1490299349.028:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=683 comm="apparmor_parser"
audit: type=1400 audit(1490299349.044:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=702 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1520308 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 11725 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
Bluetooth: hci0: Setting Intel event mask failed (-16)
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
wlp1s0: authenticate with 10:da:43:b4:fb:a3
wlp1s0: send auth to 10:da:43:b4:fb:a3 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 10:da:43:b4:fb:a3 (try 1/3)
wlp1s0: RX AssocResp from 10:da:43:b4:fb:a3 (capab=0x1011 status=0 aid=1)
wlp1s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
perf interrupt took too long (2522 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
CPU1: Package temperature above threshold, cpu clock throttled (total events = 4)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 4)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 4)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 4)
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature above threshold, cpu clock throttled (total events = 5883)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 5884)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 6895)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 6894)
CPU2: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature above threshold, cpu clock throttled (total events = 18506)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 18499)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 19294)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 19324)
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU3: Package temperature above threshold, cpu clock throttled (total events = 23282)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 23286)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 23860)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 23830)
CPU2: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Package temperature/speed normal
perf interrupt took too long (5011 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
CPU2: Package temperature above threshold, cpu clock throttled (total events = 23833)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 23829)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 24465)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 24435)
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU0: Package temperature above threshold, cpu clock throttled (total events = 25070)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 24320)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 25040)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 24324)
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Package temperature above threshold, cpu clock throttled (total events = 28463)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 28467)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 29994)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 29968)
CPU2: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU3: Package temperature above threshold, cpu clock throttled (total events = 32940)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 32945)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 34415)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 34390)
CPU2: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature above threshold, cpu clock throttled (total events = 35383)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 35374)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 36943)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 36918)
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU2: Package temperature above threshold, cpu clock throttled (total events = 48778)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 48769)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 52391)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 52416)
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU2: Package temperature/speed normal

Return To joule-570x-rbench System Information