dmesg - none
Linux version 4.9.14-200.fc25.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 6.3.1 20161221 (Red Hat 6.3.1-1) (GCC) ) #1 SMP Mon Mar 13 19:26:40 UTC 2017
Command line: BOOT_IMAGE=/vmlinuz-4.9.14-200.fc25.x86_64 root=/dev/mapper/fedora_play00-root ro rd.lvm.lv=fedora_play00/root rd.lvm.lv=fedora_play00/swap rhgb quiet nouveau.modeset=0 rd.driver.blacklist=nouveau video=vesa:off LANG=en_US.UTF-8
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bcaaffff] usable
BIOS-e820: [mem 0x00000000bcab0000-0x00000000bcf28fff] reserved
BIOS-e820: [mem 0x00000000bcf29000-0x00000000bd240fff] ACPI NVS
BIOS-e820: [mem 0x00000000bd241000-0x00000000bd344fff] reserved
BIOS-e820: [mem 0x00000000bd345000-0x00000000bd345fff] usable
BIOS-e820: [mem 0x00000000bd346000-0x00000000bd3cbfff] ACPI NVS
BIOS-e820: [mem 0x00000000bd3cc000-0x00000000bd7fffff] usable
BIOS-e820: [mem 0x00000000d0000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000083fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X79 Extreme6, BIOS P3.00 01/24/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x840000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FF800000000 write-back
1 base 000800000000 mask 3FFFC0000000 write-back
2 base 0000BE000000 mask 3FFFFE000000 uncachable
3 base 0000C0000000 mask 3FFFC0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xbe000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd9d0-0x000fd9df] mapped at [ffff91e5800fd9d0]
Base memory trampoline at [ffff91e580097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x3da262000, 0x3da262fff] PGTABLE
BRK [0x3da263000, 0x3da263fff] PGTABLE
BRK [0x3da264000, 0x3da264fff] PGTABLE
BRK [0x3da265000, 0x3da265fff] PGTABLE
BRK [0x3da266000, 0x3da266fff] PGTABLE
BRK [0x3da267000, 0x3da267fff] PGTABLE
BRK [0x3da268000, 0x3da268fff] PGTABLE
RAMDISK: [mem 0x35a7d000-0x36d36fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BD161080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BD16A888 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BD161190 0096F7 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BD23EF80 000040
ACPI: APIC 0x00000000BD16A980 000100 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BD16AA80 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BD16AAC8 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: AAFT 0x00000000BD16AB08 0000BA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BD16ABC8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000BD16AC00 0CD380 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: EINJ 0x00000000BD237F80 000130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 0x00000000BD2380B0 000210 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 0x00000000BD2382C0 0000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 0x00000000BD238368 000030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000083fffffff]
NODE_DATA(0) allocated [mem 0x83ffe9000-0x83fffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000083fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000bcaaffff]
node 0: [mem 0x00000000bd345000-0x00000000bd345fff]
node 0: [mem 0x00000000bd3cc000-0x00000000bd7fffff]
node 0: [mem 0x0000000100000000-0x000000083fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000083fffffff]
On node 0 totalpages: 8375937
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12028 pages used for memmap
DMA32 zone: 769765 pages, LIFO batch:31
Normal zone: 118784 pages used for memmap
Normal zone: 7602176 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbcab0000-0xbcf28fff]
PM: Registered nosave memory: [mem 0xbcf29000-0xbd240fff]
PM: Registered nosave memory: [mem 0xbd241000-0xbd344fff]
PM: Registered nosave memory: [mem 0xbd346000-0xbd3cbfff]
PM: Registered nosave memory: [mem 0xbd800000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff91ed9f200000 s108504 r8192 d30760 u262144
pcpu-alloc: s108504 r8192 d30760 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8245040
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.14-200.fc25.x86_64 root=/dev/mapper/fedora_play00-root ro rd.lvm.lv=fedora_play00/root rd.lvm.lv=fedora_play00/swap rhgb quiet nouveau.modeset=0 rd.driver.blacklist=nouveau video=vesa:off LANG=en_US.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 32873484K/33503748K available (8331K kernel code, 1422K rwdata, 3396K rodata, 1688K init, 1332K bss, 630264K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=12.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=12
NR_IRQS:65792 nr_irqs:928 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-11.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3199.852 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.70 BogoMIPS (lpj=3199852)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160831
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 18 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffffb310b000 - ffffffffb3113000)
ftrace: allocating 31120 entries in 122 pages
smpboot: Max logical packages: 2
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz (family: 0x6, model: 0x2d, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (76841.35 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbcf29000-0xbd240fff] (3244032 bytes)
PM: Registering ACPI NVS region [mem 0xbd346000-0xbd3cbfff] (548864 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 23:22:21, date: 03/17/17
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xd0000000-0xd0200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xcc000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb805000-0xfb805fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb804000-0xfb80400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb803000-0xfb8033ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb802000-0xfb8023ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb801000-0xfb8017ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb800000-0xfb8000ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [1b4b:9230] type 00 class 0x010601
pci 0000:01:00.0: reg 0x10: [io 0xe050-0xe057]
pci 0000:01:00.0: reg 0x14: [io 0xe040-0xe043]
pci 0000:01:00.0: reg 0x18: [io 0xe030-0xe037]
pci 0000:01:00.0: reg 0x1c: [io 0xe020-0xe023]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe01f]
pci 0000:01:00.0: reg 0x24: [mem 0xfb710000-0xfb7107ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfb700000-0xfb70ffff pref]
pci 0000:01:00.0: Enabling fixed DMA alias to 00.1
pci 0000:01:00.0: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:02:00.0: [10de:13c0] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:02:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:02:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:02:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [104c:8241] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit]
pci 0000:06:00.0: reg 0x18: [mem 0xfb610000-0xfb611fff 64bit]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:07:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xfb500000-0xfb507fff 64bit]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:08:00.0: [14e4:16b1] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0xf2110000-0xf211ffff 64bit pref]
pci 0000:08:00.0: reg 0x18: [mem 0xf2100000-0xf210ffff 64bit pref]
pci 0000:08:00.0: reg 0x30: [mem 0xfb400000-0xfb4007ff pref]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:09:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:09:00.0: reg 0x10: [mem 0xfb300000-0xfb3007ff 64bit]
pci 0000:09:00.0: reg 0x18: [io 0xc000-0xc0ff]
pci 0000:09:00.0: supports D2
pci 0000:09:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:0a:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:0a:00.0: reg 0x10: [io 0xb050-0xb057]
pci 0000:0a:00.0: reg 0x14: [io 0xb040-0xb043]
pci 0000:0a:00.0: reg 0x18: [io 0xb030-0xb037]
pci 0000:0a:00.0: reg 0x1c: [io 0xb020-0xb023]
pci 0000:0a:00.0: reg 0x20: [io 0xb000-0xb01f]
pci 0000:0a:00.0: reg 0x24: [mem 0xfb200000-0xfb2001ff]
pci 0000:00:1c.6: PCI bridge to [bus 0a]
pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:0b:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:0b:00.0: reg 0x10: [io 0xa050-0xa057]
pci 0000:0b:00.0: reg 0x14: [io 0xa040-0xa043]
pci 0000:0b:00.0: reg 0x18: [io 0xa030-0xa037]
pci 0000:0b:00.0: reg 0x1c: [io 0xa020-0xa023]
pci 0000:0b:00.0: reg 0x20: [io 0xa000-0xa01f]
pci 0000:0b:00.0: reg 0x24: [mem 0xfb100000-0xfb1001ff]
pci 0000:00:1c.7: PCI bridge to [bus 0b]
pci 0000:00:1c.7: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xcc000000-0xfbffffff window] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:02:00.0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbcab0000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd346000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x0400-0x0453] has been reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x1180-0x119f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfb700000-0xfb7fffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.6: PCI bridge to [bus 0a]
pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.7: PCI bridge to [bus 0b]
pci 0000:00:1c.7: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0c]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xcc000000-0xfbffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfb700000-0xfb7fffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfb600000-0xfb6fffff]
pci_bus 0000:07: resource 1 [mem 0xfb500000-0xfb5fffff]
pci_bus 0000:08: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:08: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:09: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:0a: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:0b: resource 0 [io 0xa000-0xafff]
pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:0c: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:0c: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:0c: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:0c: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:0c: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0c: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:0c: resource 10 [mem 0xcc000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 19176K (ffff91e5b5a7d000 - ffff91e5b6d37000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb8ab0000-0xbcab0000] (64MB) mapped at [ffff91e638ab0000-ffff91e63caaffff]
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1489792941.135:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=37 max_order=23 bucket_order=0
zbud: loaded
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: using zlib compression
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb801000 port 0xfb801100 irq 27
ata2: SATA max UDMA/133 abar m2048@0xfb801000 port 0xfb801180 irq 27
ata3: SATA max UDMA/133 abar m2048@0xfb801000 port 0xfb801200 irq 27
ata4: SATA max UDMA/133 abar m2048@0xfb801000 port 0xfb801280 irq 27
ata5: SATA max UDMA/133 abar m2048@0xfb801000 port 0xfb801300 irq 27
ata6: SATA max UDMA/133 abar m2048@0xfb801000 port 0xfb801380 irq 27
ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:01:00.0: flags: 64bit ncq fbs pio
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
scsi host11: ahci
scsi host12: ahci
scsi host13: ahci
ata7: SATA max UDMA/133 abar m2048@0xfb710000 port 0xfb710100 irq 28
ata8: SATA max UDMA/133 abar m2048@0xfb710000 port 0xfb710180 irq 28
ata9: SATA max UDMA/133 abar m2048@0xfb710000 port 0xfb710200 irq 28
ata10: SATA max UDMA/133 abar m2048@0xfb710000 port 0xfb710280 irq 28
ata11: SATA max UDMA/133 abar m2048@0xfb710000 port 0xfb710300 irq 28
ata12: SATA max UDMA/133 abar m2048@0xfb710000 port 0xfb710380 irq 28
ata13: SATA max UDMA/133 abar m2048@0xfb710000 port 0xfb710400 irq 28
ata14: SATA max UDMA/133 abar m2048@0xfb710000 port 0xfb710480 irq 28
ahci 0000:0a:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:0a:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0a:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host14: ahci
scsi host15: ahci
ata15: SATA max UDMA/133 abar m512@0xfb200000 port 0xfb200100 irq 29
ata16: SATA max UDMA/133 abar m512@0xfb200000 port 0xfb200180 irq 29
ahci 0000:0b:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:0b:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:0b:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host16: ahci
scsi host17: ahci
ata17: SATA max UDMA/133 abar m512@0xfb100000 port 0xfb100100 irq 30
ata18: SATA max UDMA/133 abar m512@0xfb100000 port 0xfb100180 irq 30
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb803000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.14-200.fc25.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb802000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.9.14-200.fc25.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:06:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x00000000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.9.14-200.fc25.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:06:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.9.14-200.fc25.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:06:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:07:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.9.14-200.fc25.x86_64 xhci-hcd
usb usb5: SerialNumber: 0000:07:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.9.14-200.fc25.x86_64 xhci-hcd
usb usb6: SerialNumber: 0000:07:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: sig=0x206d7, pf=0x4, revision=0x710
microcode: Microcode Update Driver: v2.01 , Peter Oruba
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'Fedora kernel signing key: c60e36ab278ff72db76ade317992ee4454575760'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
BERT: Can't request iomem region .
Magic number: 9:522:403
rtc_cmos 00:03: setting system clock to 2017-03-17 23:22:21 UTC (1489792941)
PM: Hibernation image not present or could not be loaded.
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-9: ST4000DX001-1CE168, CC44, max UDMA/133
ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: HPA detected: current 500116079, native 500118192
ata2.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
ata2.00: 500116079 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB01, max UDMA/100
ata3.00: NCQ Send/Recv Log not supported
ata3.00: ATA-9: Samsung SSD 840 Series, DXT06B0Q, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata5.00: configured for UDMA/133
ata3.00: NCQ Send/Recv Log not supported
ata3.00: configured for UDMA/133
ata6.00: configured for UDMA/100
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: NCQ Send/Recv Log not supported
ata1.00: ATA-9: Samsung SSD 850 EVO 1TB, EMT01B6Q, max UDMA/133
ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: NCQ Send/Recv Log not supported
ata1.00: configured for UDMA/133
ata13: SATA link down (SStatus 0 SControl 310)
ata11: SATA link down (SStatus 0 SControl 310)
ata9: SATA link down (SStatus 0 SControl 310)
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
ata12: SATA link down (SStatus 0 SControl 310)
ata8: SATA link down (SStatus 0 SControl 310)
ata10: SATA link down (SStatus 0 SControl 310)
ata15: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: new high-speed USB device number 2 using ehci-pci
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata4.00: ATA-9: ST4000DX001-1CE168, CC44, max UDMA/133
ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 3-1: new full-speed USB device number 2 using xhci_hcd
usb 2-1: new high-speed USB device number 2 using ehci-pci
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 500116079 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: Enabling discard_zeroes_data
sdc: sdc1 sdc2
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdc] Attached SCSI disk
usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST4000DX001-1CE1 CC44 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: Direct-Access ATA ST4000DX001-1CE1 CC44 PQ: 0 ANSI: 5
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
usb 6-1: New USB device found, idVendor=11b0, idProduct=6558
usb 6-1: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 6-1: Product: PRO57U SS
usb 6-1: Manufacturer: AFT
usb 6-1: SerialNumber: 000000000266
sd 4:0:0:0: [sde] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 4:0:0:0: [sde] 4096-byte physical blocks
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-222AB SB01 PQ: 0 ANSI: 5
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI disk
sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg5 type 5
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata17: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata17.00: HPA detected: current 500116079, native 500118192
ata17.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
ata17.00: 500116079 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata17.00: configured for UDMA/133
usb 3-1: New USB device found, idVendor=05fc, idProduct=0231
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: JBL Pebbles
usb 3-1: Manufacturer: Harman Multimedia
usb 3-1: SerialNumber: 1.0.0
input: Harman Multimedia JBL Pebbles as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb3/3-1/3-1:1.2/0003:05FC:0231.0001/input/input5
hid-generic 0003:05FC:0231.0001: input,hidraw0: USB HID v1.00 Device [Harman Multimedia JBL Pebbles] on usb-0000:06:00.0-1/input2
random: fast init done
usb 3-3: new full-speed USB device number 3 using xhci_hcd
usb 2-1.5: new full-speed USB device number 3 using ehci-pci
usb 2-1.5: New USB device found, idVendor=051d, idProduct=0002
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.5: Product: Back-UPS XS 1500G FW:866.L6 .D USB FW:L6
usb 2-1.5: Manufacturer: American Power Conversion
usb 2-1.5: SerialNumber: 3B1219292530
usb 3-3: New USB device found, idVendor=046d, idProduct=c52b
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB Receiver
usb 3-3: Manufacturer: Logitech
hid-generic 0003:051D:0002.0002: hiddev0,hidraw1: USB HID v1.00 Device [American Power Conversion Back-UPS XS 1500G FW:866.L6 .D USB FW:L6 ] on usb-0000:00:1d.0-1.5/input0
ata14.00: ATAPI: MARVELL VIRTUAL, 1.09, max UDMA/66
ata14.00: configured for UDMA/66
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7.00: ATA-7: MARVELL Raid VD, MV.R00-0, max UDMA7
ata7.00: 23441477120 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata7.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA MARVELL Raid VD 00-0 PQ: 0 ANSI: 5
usb 2-1.6: new full-speed USB device number 4 using ehci-pci
sd 6:0:0:0: [sdf] 23441477120 512-byte logical blocks: (12.0 TB/10.9 TiB)
sd 6:0:0:0: [sdf] Write Protect is off
sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 6:0:0:0: Attached scsi generic sg6 type 0
scsi 13:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5
scsi 13:0:0:0: Attached scsi generic sg7 type 3
tsc: Refined TSC clocksource calibration: 3199.858 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e1fc3b0531, max_idle_ns: 440795275313 ns
sdf: sdf1
sd 6:0:0:0: [sdf] Attached SCSI disk
usb 2-1.6: New USB device found, idVendor=0853, idProduct=0111
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6: Product: Realforce 87
usb 2-1.6: Manufacturer: Topre Corporation
input: Topre Corporation Realforce 87 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:0853:0111.0006/input/input6
hid-generic 0003:0853:0111.0006: input,hidraw2: USB HID v1.11 Keyboard [Topre Corporation Realforce 87] on usb-0000:00:1d.0-1.6/input0
ata16: SATA link down (SStatus 0 SControl 300)
scsi 16:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5
sd 16:0:0:0: Attached scsi generic sg8 type 0
sd 16:0:0:0: [sdg] 500116079 512-byte logical blocks: (256 GB/238 GiB)
sd 16:0:0:0: [sdg] Write Protect is off
sd 16:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 16:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdg: sdg1
sd 16:0:0:0: [sdg] Attached SCSI disk
ata18: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata18.00: supports DRM functions and may not be fully accessible
ata18.00: disabling queued TRIM support
ata18.00: ATA-9: Samsung SSD 850 EVO 2TB, EMT01B6Q, max UDMA/133
ata18.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata18.00: supports DRM functions and may not be fully accessible
ata18.00: disabling queued TRIM support
ata18.00: configured for UDMA/133
scsi 17:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
sd 17:0:0:0: Attached scsi generic sg9 type 0
sd 17:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 17:0:0:0: [sdh] Write Protect is off
sd 17:0:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 17:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdh: sdh1
sd 17:0:0:0: [sdh] Attached SCSI disk
Freeing unused kernel memory: 1688K (ffffffffb2f65000 - ffffffffb310b000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1892K (ffff91e959827000 - ffff91e959a00000)
Freeing unused kernel memory: 700K (ffff91e959d51000 - ffff91e959e00000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Timers.
systemd[1]: Listening on Journal Socket.
systemd[1]: Reached target Swap.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Local File Systems.
audit: type=1130 audit(1489792943.221:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1489792943.222:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1489792943.257:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1489792943.257:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1489792943.279:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1489792943.299:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1489792943.302:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
clocksource: Switched to clocksource tsc
audit: type=1130 audit(1489792943.364:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
wmi: Mapper loaded
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
usb-storage 6-1:1.0: USB Mass Storage device detected
scsi host18: usb-storage 6-1:1.0
usbcore: registered new interface driver usb-storage
audit: type=1130 audit(1489792943.380:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usbcore: registered new interface driver uas
logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:06:00.0-3/input2
tg3.c:v3.137 (May 11, 2014)
tg3 0000:08:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:39:31:5b
tg3 0000:08:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:08:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:08:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:08:00.0 enp8s0: renamed from eth0
firewire_ohci 0000:09:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x10
input: Logitech MX Master as /devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0005/0003:046D:4041.0007/input/input7
logitech-hidpp-device 0003:046D:4041.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech MX Master] on usb-0000:06:00.0-3:1
firewire_core 0000:09:00.0: created device fw0: GUID 00138f000011fc43, S400
random: crng init done
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
scsi 18:0:0:0: Direct-Access AFT CF PRO57U SS 0554 PQ: 0 ANSI: 5
scsi 18:0:0:1: Direct-Access AFT XD PRO57U SS 0554 PQ: 0 ANSI: 5
scsi 18:0:0:2: Direct-Access AFT SD PRO57U SS 0554 PQ: 0 ANSI: 5
scsi 18:0:0:3: Direct-Access AFT MS PRO57U SS 0554 PQ: 0 ANSI: 5
scsi 18:0:0:4: Direct-Access AFT MSD PRO57U SS 0554 PQ: 0 ANSI: 5
sd 18:0:0:0: Attached scsi generic sg10 type 0
sd 18:0:0:1: Attached scsi generic sg11 type 0
sd 18:0:0:2: Attached scsi generic sg12 type 0
sd 18:0:0:3: Attached scsi generic sg13 type 0
sd 18:0:0:4: Attached scsi generic sg14 type 0
sd 18:0:0:0: [sdi] Attached SCSI removable disk
sd 18:0:0:1: [sdj] Attached SCSI removable disk
sd 18:0:0:2: [sdk] Attached SCSI removable disk
sd 18:0:0:3: [sdl] Attached SCSI removable disk
sd 18:0:0:4: [sdm] Attached SCSI removable disk
systemd-journald[317]: Received SIGTERM from PID 1 (systemd).
systemd: 20 output lines suppressed due to ratelimiting
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
EXT4-fs (dm-0): re-mounted. Opts: discard
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 12 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3199857777 Hz
vboxdrv: Successfully loaded version 5.1.14 (interface 0x00280000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
md: bind
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
systemd-journald[770]: Received request to flush runtime journal from PID 1
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
[drm] Initialized
md: bind
md: raid0 personality registered for level 0
md/raid0:md0: md_size is 999702528 sectors.
md: RAID0 configuration for md0 - 1 zone
md: zone0=[sdb1/sdg1]
zone-offset= 0KB, device-offset= 0KB, size= 499851264KB
md0: detected capacity change from 0 to 511847694336
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
snd_hda_intel 0000:02:00.1: Disabling MSI
snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 240
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.39 Tue Jan 31 20:47:00 PST 2017
(using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.39 Tue Jan 31 19:41:48 PST 2017
Adding 16777212k swap on /dev/mapper/fedora_play00-swap. Priority:-1 extents:1 across:16777212k SSDscFS
[drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
usbcore: registered new interface driver snd-usb-audio
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input8
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input9
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card1/input11
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (sdh1): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
audit_printk_skb: 174 callbacks suppressed
audit: type=1130 audit(1489792946.472:69): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-pvscan@8:34 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1489792946.638:70): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-pvscan@8:2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1489792946.658:71): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-mapper-fedora_play00\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: discard
audit: type=1130 audit(1489792946.685:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1489792946.687:73): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1489792946.687:74): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1489792946.698:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1489792946.698:76): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1489792946.699:77): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=fedora-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1489792946.712:78): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=55)
Initialized host personality
NET: Registered protocol family 40
fuse init (API version 7.26)
ppdev: user-space parallel port driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
nvidia-modeset: Allocated GPU:0 (GPU-1b2299ab-4e72-a3c6-9e1e-6e3fc5290452) @ PCI:0000:02:00.0
virbr0: port 1(virbr0-nic) entered disabled state
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 12
tg3 0000:08:00.0 enp8s0: Link is up at 1000 Mbps, full duplex
tg3 0000:08:00.0 enp8s0: Flow control is on for TX and on for RX
tg3 0000:08:00.0 enp8s0: EEE is disabled
IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready