dmesg - 1
microcode: CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-42-generic (buildd@lgw01-54) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #49-Ubuntu SMP Tue Jun 28 21:26:26 UTC 2016 (Ubuntu 4.2.0-42.49-generic 4.2.8-ckt12)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Enabled xstate features 0x3, context size is 0x240 bytes, using 'standard' format.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000defaff9f] usable
BIOS-e820: [mem 0x00000000defaffa0-0x00000000defb1fff] ACPI NVS
BIOS-e820: [mem 0x00000000defb2000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011bffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Hewlett-Packard HP Compaq dc5800 Microtower/2820h, BIOS 786F2 v01.51 08/01/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x11c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0DF000000 mask FFF000000 uncachable
2 base 0E0000000 mask FE0000000 uncachable
3 base 11C000000 mask FFC000000 uncachable
4 base 100000000 mask FE0000000 write-back
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3568MB, range: 16MB, type UC
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 4544MB, range: 64MB, type UC
reg 4, base: 4GB, range: 512MB, type WB
total RAM covered: 4016M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3568MB, range: 16MB, type UC
reg 4, base: 4GB, range: 512MB, type WB
reg 5, base: 4544MB, range: 64MB, type UC
e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdefaf max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [ffff8800000f9bf0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x021f1000, 0x021f1fff] PGTABLE
BRK [0x021f2000, 0x021f2fff] PGTABLE
BRK [0x021f3000, 0x021f3fff] PGTABLE
init_memory_mapping: [mem 0x11be00000-0x11bffffff]
[mem 0x11be00000-0x11bffffff] page 2M
BRK [0x021f4000, 0x021f4fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x11bdfffff]
[mem 0x100000000-0x11bdfffff] page 2M
init_memory_mapping: [mem 0xc0000000-0xdefaefff]
[mem 0xc0000000-0xdedfffff] page 2M
[mem 0xdee00000-0xdefaefff] page 4k
BRK [0x021f5000, 0x021f5fff] PGTABLE
BRK [0x021f6000, 0x021f6fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0xbfffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbfffffff] page 2M
RAMDISK: [mem 0x33b96000-0x35dc2fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000E6210 000014 (v00 COMPAQ)
ACPI: RSDT 0x00000000DEFC2040 000040 (v01 HPQOEM SLIC-BPC 20080801 00000000)
ACPI: FACP 0x00000000DEFC20E8 000074 (v01 COMPAQ BEARLAKE 00000001 00000000)
ACPI: DSDT 0x00000000DEFC245F 00A4AA (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
ACPI: FACS 0x00000000DEFC2000 000040
ACPI: APIC 0x00000000DEFC215C 000084 (v01 COMPAQ BEARLAKE 00000001 00000000)
ACPI: ASF! 0x00000000DEFC21E0 000063 (v32 COMPAQ BEARLAKE 00000001 00000000)
ACPI: MCFG 0x00000000DEFC2243 00003C (v01 COMPAQ BEARLAKE 00000001 00000000)
ACPI: TCPA 0x00000000DEFC227F 000032 (v01 COMPAQ BEARLAKE 00000001 00000000)
ACPI: SLIC 0x00000000DEFC22B1 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
ACPI: HPET 0x00000000DEFC2427 000038 (v01 COMPAQ BEARLAKE 00000001 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011bffffff]
NODE_DATA(0) allocated [mem 0x11bff9000-0x11bffdfff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff880117600000-ffff88011b5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000011bffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000defaefff]
node 0: [mem 0x0000000100000000-0x000000011bffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000011bffffff]
On node 0 totalpages: 1027917
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14207 pages used for memmap
DMA32 zone: 909231 pages, LIFO batch:31
Normal zone: 1792 pages used for memmap
Normal zone: 114688 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xdf800000-0xdfffffff
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
PM: Registered nosave memory: [mem 0xdefaf000-0xdefaffff]
PM: Registered nosave memory: [mem 0xdefb0000-0xdefb1fff]
PM: Registered nosave memory: [mem 0xdefb2000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xffffffff]
e820: [mem 0xe0000000-0xf3ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88011bc00000 s96728 r8192 d30248 u524288
pcpu-alloc: s96728 r8192 d30248 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1011833
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3925800K/4111668K available (8187K kernel code, 1239K rwdata, 3808K rodata, 1464K init, 1292K bss, 185868K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:456 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2992.457 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.91 BogoMIPS (lpj=11969828)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff820a5000 - ffffffff820ac000)
ftrace: allocating 30962 entries in 121 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (11969.82 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdefaffa0-0xdefb1fff] (8288 bytes)
reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 13:58:18, date: 03/03/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800DA827000 0003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800DA874000 00017C (v01 COMPAQ CST 00000001 MSFT 0100000E)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20150619/nsarguments-189)
ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20150619/dsfield-211)
ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801170a6af0), AE_ALREADY_EXISTS (20150619/psparse-536)
acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0x2fff window]
pci_bus 0000:00: root bus resource [io 0x3000-0x6fff window]
pci_bus 0000:00: root bus resource [io 0x7000-0xafff window]
pci_bus 0000:00: root bus resource [io 0xb000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf3ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci 0000:00:00.0: [8086:29d0] type 00 class 0x060000
pci 0000:00:02.0: [8086:29d2] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0100000-0xf017ffff]
pci 0000:00:02.0: reg 0x14: [io 0x1240-0x1247]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0xf0000000-0xf00fffff]
pci 0000:00:03.0: [8086:29d4] type 00 class 0x078000
pci 0000:00:03.0: reg 0x10: [mem 0xf01a5900-0xf01a590f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:10bd] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf0180000-0xf019ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf01a4000-0xf01a4fff]
pci 0000:00:19.0: reg 0x18: [io 0x1100-0x111f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x1120-0x113f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x1140-0x115f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0x1160-0x117f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf01a5000-0xf01a53ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf01a0000-0xf01a3fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1180-0x119f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x11a0-0x11bf]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x11c0-0x11df]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf01a5400-0xf01a57ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0xf800-0xf87f]: address conflict with ACPI CPU throttle [io 0xf810-0xf815]
pci 0000:00:1f.0: quirk: [io 0xfa00-0xfa3f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018a
pci 0000:00:1f.2: reg 0x10: [io 0x1248-0x124f]
pci 0000:00:1f.2: reg 0x14: [io 0x1268-0x126b]
pci 0000:00:1f.2: reg 0x18: [io 0x1250-0x1257]
pci 0000:00:1f.2: reg 0x1c: [io 0x126c-0x126f]
pci 0000:00:1f.2: reg 0x20: [io 0x1200-0x120f]
pci 0000:00:1f.2: reg 0x24: [io 0x1210-0x121f]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0x1258-0x125f]
pci 0000:00:1f.5: reg 0x14: [io 0x1270-0x1273]
pci 0000:00:1f.5: reg 0x18: [io 0x1260-0x1267]
pci 0000:00:1f.5: reg 0x1c: [io 0x1274-0x1277]
pci 0000:00:1f.5: reg 0x20: [io 0x1220-0x122f]
pci 0000:00:1f.5: reg 0x24: [io 0x1230-0x123f]
pci 0000:00:1c.0: PCI bridge to [bus 20]
pci 0000:00:1c.1: PCI bridge to [bus 30]
pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfebfffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x7000-0xafff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xb000-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf3ffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xdefaffa0-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (disabled)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:06: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x0400-0x041f] has been reserved
system 00:08: [io 0x0420-0x043f] has been reserved
system 00:08: [io 0x0440-0x045f] has been reserved
system 00:08: [io 0x0460-0x047f] has been reserved
system 00:08: [io 0x0480-0x048f] has been reserved
system 00:08: [io 0xf800-0xf81f] could not be reserved
system 00:08: [io 0xf820-0xf83f] has been reserved
system 00:08: [io 0xf840-0xf85f] has been reserved
system 00:08: [io 0xf860-0xf87f] has been reserved
system 00:08: [io 0xfa00-0xfa3f] has been reserved
system 00:08: [io 0xfc00-0xfc7f] has been reserved
system 00:08: [io 0xfc80-0xfcff] has been reserved
system 00:08: [io 0xfe00-0xfe7f] has been reserved
system 00:08: [io 0xfe80-0xfeff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x00100000-0xdfffffff] could not be reserved
system 00:0a: [mem 0x000e4000-0x000fffff] could not be reserved
system 00:0a: [mem 0xfec01000-0xfecfffff] has been reserved
system 00:0a: [mem 0xfed00400-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed45000-0xffffffff] has been reserved
system 00:0a: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:0a: [mem 0x000cd400-0x000e3fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 20] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 20] add_size 200000 add_align 100000
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 30] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000 add_align 100000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 30] add_size 200000 add_align 100000
pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
pci 0000:00:1c.1: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.0: PCI bridge to [bus 20]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff]
pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 30]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xf8400000-0xf85fffff]
pci 0000:00:1c.1: bridge window [mem 0xf8600000-0xf87fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07]
pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfebfffff window]
pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x1000-0x2fff window]
pci_bus 0000:00: resource 7 [io 0x3000-0x6fff window]
pci_bus 0000:00: resource 8 [io 0x7000-0xafff window]
pci_bus 0000:00: resource 9 [io 0xb000-0xffff window]
pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 11 [mem 0xe0000000-0xf3ffffff window]
pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:20: resource 1 [mem 0xf8000000-0xf81fffff]
pci_bus 0000:20: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
pci_bus 0000:30: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:30: resource 1 [mem 0xf8400000-0xf85fffff]
pci_bus 0000:30: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref]
pci_bus 0000:07: resource 4 [mem 0xf8000000-0xfebfffff window]
pci_bus 0000:07: resource 5 [io 0x0000-0x0cf7 window]
pci_bus 0000:07: resource 6 [io 0x1000-0x2fff window]
pci_bus 0000:07: resource 7 [io 0x3000-0x6fff window]
pci_bus 0000:07: resource 8 [io 0x7000-0xafff window]
pci_bus 0000:07: resource 9 [io 0xb000-0xffff window]
pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:07: resource 11 [mem 0xe0000000-0xf3ffffff window]
pci_bus 0000:07: resource 12 [mem 0xfed40000-0xfed44fff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 34996K (ffff880033b96000 - ffff880035dc3000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdafaf000-0xdefaf000] (64MB) mapped at [ffff8800dafaf000-ffff8800defaefff]
microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa0b
microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa0b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1488549498.640:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Q33 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16)
tpm_tis 00:06: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us
tpm_tis 00:06: Adjusting TPM timeout parameters.
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b226fab613, max_idle_ns: 440795237143 ns
tpm_tis 00:06: TPM is disabled/deactivated (0x7)
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1200 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1208 irq 15
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0x1258 ctl 0x1270 bmdma 0x1220 irq 18
ata4: SATA max UDMA/133 cmd 0x1260 ctl 0x1274 bmdma 0x1228 irq 18
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 22, io mem 0xf01a5000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-42-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 20, io mem 0xf01a5400
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-42-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001120
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-42-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001140
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-42-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001160
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.2.0-42-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001180
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.2.0-42-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 21, io base 0x000011a0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.2.0-42-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 22, io base 0x000011c0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 4.2.0-42-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 7138f14b5cc626ba6e4b75860a1ee2082de820e2'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
tpm_tis 00:06: A TPM error (7) occurred attempting to read a pcr value
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 9:27:988
machinecheck machinecheck1: hash matches
rtc_cmos 00:00: setting system clock to 2017-03-03 13:58:20 UTC (1488549500)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: ST380815AS, 3.CHH, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653Z, HD00, max UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST380815AS H PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653Z HD00 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: Hitachi HUA723020ALA641, MK7OA840, max UDMA/133
ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA Hitachi HUA72302 A840 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 3:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 1464K (ffffffff81f37000 - ffffffff820a5000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 2040K (ffff880001802000 - ffff880001a00000)
Freeing unused kernel memory: 288K (ffff880001db8000 - ffff880001e00000)
random: systemd-udevd urandom read with 25 bits of entropy available
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[drm] Initialized drm 1.1.0 20060810
wmi: Mapper loaded
FDC 0 is a post-1991 82077
usb 6-1: new full-speed USB device number 2 using uhci_hcd
usb 6-1: New USB device found, idVendor=0557, idProduct=7000
usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 4 ports detected
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:24:81:9f:24:d7
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 6, PBA No: 1042FF-0FF
[drm] Memory usable by graphics device = 512M
checking generic (e0000000 500000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
e1000e 0000:00:19.0 enp0s25: renamed from eth0
[drm] ACPI BIOS requests an excessive sleep of 4294967295 ms, using 1500 ms instead
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20150619/video-1175)
ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
usb 6-1.1: new low-speed USB device number 3 using uhci_hcd
usb 6-1.1: New USB device found, idVendor=0518, idProduct=0001
usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1.1: Product: USB-compliant keyboard
usb 6-1.1: Manufacturer: Plus More Enterprise LTD.
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.0/0003:0518:0001.0001/input/input6
hid-generic 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.1/input0
input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.1/6-1.1:1.1/0003:0518:0001.0002/input/input7
hid-generic 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.1/input1
raid6: sse2x1 gen() 5232 MB/s
raid6: sse2x1 xor() 5037 MB/s
raid6: sse2x2 gen() 5564 MB/s
raid6: sse2x2 xor() 6157 MB/s
raid6: sse2x4 gen() 8737 MB/s
random: nonblocking pool is initialized
raid6: sse2x4 xor() 6974 MB/s
raid6: using algorithm sse2x4 gen() 8737 MB/s
raid6: .... xor() 6974 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 12418.000 MB/sec
generic_sse: 10970.000 MB/sec
xor: using function: prefetch64-sse (12418.000 MB/sec)
Btrfs loaded
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 6-1.2: new full-speed USB device number 4 using uhci_hcd
usb 6-1.2: New USB device found, idVendor=1ea7, idProduct=002c
usb 6-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-1.2: Product: USB Gaming Mouse
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/0003:1EA7:002C.0003/input/input8
hid-generic 0003:1EA7:002C.0003: input,hidraw2: USB HID v1.10 Keyboard [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input0
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.1/0003:1EA7:002C.0004/input/input9
hid-generic 0003:1EA7:002C.0004: input,hidraw3: USB HID v1.10 Mouse [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input1
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.2/0003:1EA7:002C.0005/input/input10
hid-generic 0003:1EA7:002C.0005: input,hiddev0,hidraw4: USB HID v1.10 Device [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input2
systemd[1]: [/lib/systemd/system/casper.service:10] Failed to parse input specifier, ignoring: force-tty
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Listening on Journal Socket.
systemd[1]: Started Read required files in advance.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting LSB: controls configuration of serial ports...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Started Braille Device Support.
systemd[1]: Reached target Slices.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:03: [irq 10]
parport_pc 00:03: [io 0x0378-0x037a]
parport_pc 00:03: activated
parport_pc 00:03: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 10 [PCSPP,EPP]
lp0: using parport0 (interrupt-driven).
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Journal Service.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[313]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
gpio_ich: GPIO from 451 to 511 on gpio_ich
input: HP WMI hotkeys as /devices/virtual/input/input11
snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1884: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_analog hdaudioC0D0: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_analog hdaudioC0D0: inputs:
snd_hda_codec_analog hdaudioC0D0: Mic=0x14
snd_hda_codec_analog hdaudioC0D0: Line=0x15
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
Adding 2928636k swap on /dev/sdb3. Priority:-1 extents:1 across:2928636k FS
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1488549520.224:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=650 comm="apparmor_parser"
audit: type=1400 audit(1488549520.224:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=650 comm="apparmor_parser"
audit: type=1400 audit(1488549520.328:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=650 comm="apparmor_parser"
audit: type=1400 audit(1488549520.328:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=650 comm="apparmor_parser"
audit: type=1400 audit(1488549520.328:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=650 comm="apparmor_parser"
audit: type=1400 audit(1488549520.456:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=650 comm="apparmor_parser"
audit: type=1400 audit(1488549520.456:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=650 comm="apparmor_parser"
audit: type=1400 audit(1488549520.456:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=650 comm="apparmor_parser"
audit: type=1400 audit(1488549520.456:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=650 comm="apparmor_parser"
audit: type=1400 audit(1488549520.708:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=650 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
Process accounting resumed
eveusb: module verification failed: signature and/or required key missing - tainting kernel
eveusb: starting
eveusb: message_up cache created
eveusb: integrated TT in USB 2.0 root hub
eveusbhcd eveusbhcd: Virtual USB Host Controller by Eltima Software
eveusbhcd eveusbhcd: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: Virtual USB Host Controller by Eltima Software
usb usb9: Manufacturer: Linux 4.2.0-42-generic eveusb_hcd
usb usb9: SerialNumber: eveusbhcd
hub 9-0:1.0: USB hub found
eveusb: USB 2.0 hub
hub 9-0:1.0: 15 ports detected
eveusb: eveusb char device 10:56
usbcore: registered new interface driver eveusb
eveusb: started
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
vboxdrv: Found 2 processor cores
vboxdrv: fAsync=0 offMin=0x1cb offMax=0x88b
vboxdrv: TSC mode is Synchronous, tentative frequency 2992499107 Hz
vboxdrv: Successfully loaded version 5.0.14_Ubuntu (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
ip_tables: (C) 2000-2006 Netfilter Core Team
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
audit_printk_skb: 57 callbacks suppressed
audit: type=1400 audit(1488549546.188:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/lxc-start" pid=1412 comm="apparmor_parser"
audit: type=1400 audit(1488549546.208:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default" pid=1417 comm="apparmor_parser"
audit: type=1400 audit(1488549546.208:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-mounting" pid=1417 comm="apparmor_parser"
audit: type=1400 audit(1488549546.208:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-nesting" pid=1417 comm="apparmor_parser"
usb 6-1.2: USB disconnect, device number 4
perf interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 6-1.2: new full-speed USB device number 5 using uhci_hcd
usb 6-1.2: New USB device found, idVendor=1ea7, idProduct=002c
usb 6-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-1.2: Product: USB Gaming Mouse
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/0003:1EA7:002C.0006/input/input16
hid-generic 0003:1EA7:002C.0006: input,hidraw2: USB HID v1.10 Keyboard [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input0
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.1/0003:1EA7:002C.0007/input/input17
hid-generic 0003:1EA7:002C.0007: input,hidraw3: USB HID v1.10 Mouse [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input1
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.2/0003:1EA7:002C.0008/input/input18
hid-generic 0003:1EA7:002C.0008: input,hiddev0,hidraw4: USB HID v1.10 Device [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input2
usb 6-1.2: USB disconnect, device number 5
usb 6-1.2: new full-speed USB device number 6 using uhci_hcd
usb 6-1.2: New USB device found, idVendor=1ea7, idProduct=002c
usb 6-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-1.2: Product: USB Gaming Mouse
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/0003:1EA7:002C.0009/input/input19
hid-generic 0003:1EA7:002C.0009: input,hidraw2: USB HID v1.10 Keyboard [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input0
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.1/0003:1EA7:002C.000A/input/input20
hid-generic 0003:1EA7:002C.000A: input,hidraw3: USB HID v1.10 Mouse [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input1
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.2/0003:1EA7:002C.000B/input/input21
hid-generic 0003:1EA7:002C.000B: input,hiddev0,hidraw4: USB HID v1.10 Device [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input2
usb 6-1.2: USB disconnect, device number 6
usb 6-1.2: new full-speed USB device number 7 using uhci_hcd
usb 6-1.2: New USB device found, idVendor=1ea7, idProduct=002c
usb 6-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-1.2: Product: USB Gaming Mouse
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/0003:1EA7:002C.000C/input/input22
hid-generic 0003:1EA7:002C.000C: input,hidraw2: USB HID v1.10 Keyboard [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input0
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.1/0003:1EA7:002C.000D/input/input23
hid-generic 0003:1EA7:002C.000D: input,hidraw3: USB HID v1.10 Mouse [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input1
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.2/0003:1EA7:002C.000E/input/input24
hid-generic 0003:1EA7:002C.000E: input,hiddev0,hidraw4: USB HID v1.10 Device [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input2
usb 6-1.2: USB disconnect, device number 7
usb 6-1.2: new full-speed USB device number 8 using uhci_hcd
usb 6-1.2: New USB device found, idVendor=1ea7, idProduct=002c
usb 6-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-1.2: Product: USB Gaming Mouse
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/0003:1EA7:002C.000F/input/input25
hid-generic 0003:1EA7:002C.000F: input,hidraw2: USB HID v1.10 Keyboard [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input0
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.1/0003:1EA7:002C.0010/input/input26
hid-generic 0003:1EA7:002C.0010: input,hidraw3: USB HID v1.10 Mouse [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input1
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.2/0003:1EA7:002C.0011/input/input27
hid-generic 0003:1EA7:002C.0011: input,hiddev0,hidraw4: USB HID v1.10 Device [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input2
usb 6-1.2: USB disconnect, device number 8
usb 6-1.2: new full-speed USB device number 9 using uhci_hcd
usb 6-1.2: New USB device found, idVendor=1ea7, idProduct=002c
usb 6-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-1.2: Product: USB Gaming Mouse
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/0003:1EA7:002C.0012/input/input28
hid-generic 0003:1EA7:002C.0012: input,hidraw2: USB HID v1.10 Keyboard [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input0
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.1/0003:1EA7:002C.0013/input/input29
hid-generic 0003:1EA7:002C.0013: input,hidraw3: USB HID v1.10 Mouse [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input1
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.2/0003:1EA7:002C.0014/input/input30
hid-generic 0003:1EA7:002C.0014: input,hiddev0,hidraw4: USB HID v1.10 Device [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input2
usb 6-1.2: USB disconnect, device number 9
usb 6-1.2: new full-speed USB device number 10 using uhci_hcd
usb 6-1.2: New USB device found, idVendor=1ea7, idProduct=002c
usb 6-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-1.2: Product: USB Gaming Mouse
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/0003:1EA7:002C.0015/input/input31
hid-generic 0003:1EA7:002C.0015: input,hidraw2: USB HID v1.10 Keyboard [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input0
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.1/0003:1EA7:002C.0016/input/input32
hid-generic 0003:1EA7:002C.0016: input,hidraw3: USB HID v1.10 Mouse [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input1
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.2/0003:1EA7:002C.0017/input/input33
hid-generic 0003:1EA7:002C.0017: input,hiddev0,hidraw4: USB HID v1.10 Device [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input2
usb 6-1.2: USB disconnect, device number 10
usb 6-1.2: new full-speed USB device number 11 using uhci_hcd
usb 6-1.2: New USB device found, idVendor=1ea7, idProduct=002c
usb 6-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-1.2: Product: USB Gaming Mouse
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/0003:1EA7:002C.0018/input/input34
hid-generic 0003:1EA7:002C.0018: input,hidraw2: USB HID v1.10 Keyboard [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input0
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.1/0003:1EA7:002C.0019/input/input35
hid-generic 0003:1EA7:002C.0019: input,hidraw3: USB HID v1.10 Mouse [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input1
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.2/0003:1EA7:002C.001A/input/input36
hid-generic 0003:1EA7:002C.001A: input,hiddev0,hidraw4: USB HID v1.10 Device [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input2
usb 6-1.2: USB disconnect, device number 11
usb 6-1.2: new full-speed USB device number 12 using uhci_hcd
usb 6-1.2: New USB device found, idVendor=1ea7, idProduct=002c
usb 6-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-1.2: Product: USB Gaming Mouse
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/0003:1EA7:002C.001B/input/input37
hid-generic 0003:1EA7:002C.001B: input,hidraw2: USB HID v1.10 Keyboard [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input0
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.1/0003:1EA7:002C.001C/input/input38
hid-generic 0003:1EA7:002C.001C: input,hidraw3: USB HID v1.10 Mouse [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input1
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.2/0003:1EA7:002C.001D/input/input39
hid-generic 0003:1EA7:002C.001D: input,hiddev0,hidraw4: USB HID v1.10 Device [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input2
usb 6-1.2: USB disconnect, device number 12
usb 6-1.2: new full-speed USB device number 13 using uhci_hcd
usb 6-1.2: New USB device found, idVendor=1ea7, idProduct=002c
usb 6-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 6-1.2: Product: USB Gaming Mouse
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/0003:1EA7:002C.001E/input/input40
hid-generic 0003:1EA7:002C.001E: input,hidraw2: USB HID v1.10 Keyboard [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input0
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.1/0003:1EA7:002C.001F/input/input41
hid-generic 0003:1EA7:002C.001F: input,hidraw3: USB HID v1.10 Mouse [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input1
input: USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.2/0003:1EA7:002C.0020/input/input42
hid-generic 0003:1EA7:002C.0020: input,hiddev0,hidraw4: USB HID v1.10 Device [USB Gaming Mouse] on usb-0000:00:1d.0-1.2/input2