dmesg - mh_process_http
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.39-1+deb8u1 (2017-02-22)
Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/vg_root-lv_root ro quiet
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
BIOS-e820: [mem 0x000000007fff0000-0x000000007fffefff] ACPI data
BIOS-e820: [mem 0x000000007ffff000-0x000000007fffffff] ACPI NVS
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 05/23/2012
Hypervisor detected: Microsoft HyperV
HyperV: features 0xe7f, hints 0x2c
HyperV: LAPIC Timer Frequency: 0xc3500
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0000000000 mask FF00000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01af5000, 0x01af5fff] PGTABLE
BRK [0x01af6000, 0x01af6fff] PGTABLE
BRK [0x01af7000, 0x01af7fff] PGTABLE
init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[mem 0x7fc00000-0x7fdfffff] page 2M
BRK [0x01af8000, 0x01af8fff] PGTABLE
init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[mem 0x7c000000-0x7fbfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7bffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7bffffff] page 2M
init_memory_mapping: [mem 0x7fe00000-0x7ffeffff]
[mem 0x7fe00000-0x7ffeffff] page 4k
BRK [0x01af9000, 0x01af9fff] PGTABLE
RAMDISK: [mem 0x37808000-0x37bfbfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F56F0 000014 (v00 ACPIAM)
ACPI: RSDT 0x000000007FFF0000 000040 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: FACP 0x000000007FFF0200 000081 (v02 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: DSDT 0x000000007FFF1724 002E78 (v01 MSFTVM MSFTVM02 00000002 INTL 02002026)
ACPI: FACS 0x000000007FFFF000 000040
ACPI: WAET 0x000000007FFF1480 000028 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: SLIC 0x000000007FFF14C0 000176 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: OEM0 0x000000007FFF16C0 000064 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: SRAT 0x000000007FFF0600 0000B8 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
ACPI: APIC 0x000000007FFF0300 00024C (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: OEMB 0x000000007FFFF040 000064 (v01 VRTUAL MICROSFT 05001223 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
Initmem setup node 0 [mem 0x00000000-0x7ffeffff]
NODE_DATA [mem 0x7ffeb000-0x7ffeffff]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x7ffeffff]
On node 0 totalpages: 524174
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 7112 pages used for memmap
DMA32 zone: 520176 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x11] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x13] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x15] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x17] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x18] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x19] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x1f] disabled)
ACPI: LAPIC (acpi_id[0x21] lapic_id[0x20] disabled)
ACPI: LAPIC (acpi_id[0x22] lapic_id[0x21] disabled)
ACPI: LAPIC (acpi_id[0x23] lapic_id[0x22] disabled)
ACPI: LAPIC (acpi_id[0x24] lapic_id[0x23] disabled)
ACPI: LAPIC (acpi_id[0x25] lapic_id[0x24] disabled)
ACPI: LAPIC (acpi_id[0x26] lapic_id[0x25] disabled)
ACPI: LAPIC (acpi_id[0x27] lapic_id[0x26] disabled)
ACPI: LAPIC (acpi_id[0x28] lapic_id[0x27] disabled)
ACPI: LAPIC (acpi_id[0x29] lapic_id[0x28] disabled)
ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x29] disabled)
ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x2a] disabled)
ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x2b] disabled)
ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x2c] disabled)
ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x2d] disabled)
ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x2e] disabled)
ACPI: LAPIC (acpi_id[0x30] lapic_id[0x2f] disabled)
ACPI: LAPIC (acpi_id[0x31] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x32] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x33] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x34] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x35] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x36] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x37] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x38] lapic_id[0x37] disabled)
ACPI: LAPIC (acpi_id[0x39] lapic_id[0x38] disabled)
ACPI: LAPIC (acpi_id[0x3a] lapic_id[0x39] disabled)
ACPI: LAPIC (acpi_id[0x3b] lapic_id[0x3a] disabled)
ACPI: LAPIC (acpi_id[0x3c] lapic_id[0x3b] disabled)
ACPI: LAPIC (acpi_id[0x3d] lapic_id[0x3c] disabled)
ACPI: LAPIC (acpi_id[0x3e] lapic_id[0x3d] disabled)
ACPI: LAPIC (acpi_id[0x3f] lapic_id[0x3e] disabled)
ACPI: LAPIC (acpi_id[0x40] lapic_id[0x3f] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 64 CPUs, 58 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0x80000000-0xffffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:64 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88007ce00000 s80960 r8192 d21440 u131072
pcpu-alloc: s80960 r8192 d21440 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
pcpu-alloc: [0] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
pcpu-alloc: [0] 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Built 1 zonelists in Node order, mobility grouping on. Total pages: 516985
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/vg_root-lv_root ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2045464K/2096696K available (5247K kernel code, 947K rwdata, 1832K rodata, 1208K init, 840K bss, 51232K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=64.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=64
NR_IRQS:33024 nr_irqs:1192 16
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using PMTIMER reference calibration
tsc: Detected 2399.953 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.90 BogoMIPS (lpj=9599812)
pid_max: default: 65536 minimum: 512
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 1 MCE banks
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff81a1c000 - ffffffff81a21000)
ftrace: allocating 21701 entries in 85 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5530 @ 2.40GHz (fam: 06, model: 1a, stepping: 05)
Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: disabled (cpu0): hardware events not enabled
#2 #3 #4 #5
x86: Booted up 1 node, 6 CPUs
smpboot: Total of 6 processors activated (28799.43 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7ffff000-0x7fffffff] (4096 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0xfe0000000-0xfffefffff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfffbffff]
pci 0000:00:00.0: [8086:7192] type 00 class 0x060000
pci 0000:00:07.0: [8086:7110] type 00 class 0x060100
pci 0000:00:07.1: [8086:7111] type 00 class 0x010180
pci 0000:00:07.1: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:07.3: [8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:07.3: quirk: [io 0x0400-0x043f] claimed by PIIX4 ACPI
pci 0000:00:08.0: [1414:5353] type 00 class 0x030000
pci 0000:00:08.0: reg 0x10: [mem 0xf8000000-0xfbffffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 0F
vgaarb: setting as boot device: PCI:0000:00:08.0
vgaarb: device added: PCI:0000:00:08.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:08.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
amd_nb: Cannot enumerate AMD northbridges
Switched to clocksource hyperv_clocksource
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
system 00:06: [io 0x01e0-0x01ef] has been reserved
system 00:06: [io 0x0160-0x016f] has been reserved
system 00:06: [io 0x0278-0x027f] has been reserved
system 00:06: [io 0x0378-0x037f] has been reserved
system 00:06: [io 0x0678-0x067f] has been reserved
system 00:06: [io 0x0778-0x077f] has been reserved
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x0400-0x043f] has been reserved
system 00:07: [io 0x0370-0x0371] has been reserved
system 00:07: [io 0x0440-0x044f] has been reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0xf7ffffff] could not be reserved
system 00:08: [mem 0xfffc0000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: resource 4 [mem 0xfe0000000-0xfffefffff]
pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfffbffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:08.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 4048K (ffff880037808000 - ffff880037bfc000)
microcode: CPU0 sig=0x106a5, pf=0x1, revision=0xffffffff
microcode: CPU1 sig=0x106a5, pf=0x1, revision=0xffffffff
microcode: CPU2 sig=0x106a5, pf=0x1, revision=0xffffffff
microcode: CPU3 sig=0x106a5, pf=0x1, revision=0xffffffff
microcode: CPU4 sig=0x106a5, pf=0x1, revision=0xffffffff
microcode: CPU5 sig=0x106a5, pf=0x1, revision=0xffffffff
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 16384 (order: 8, 1048576 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1488400530.436:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4002
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 26
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, 114 bytes nvram
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:00: setting system clock to 2017-03-01 20:35:31 UTC (1488400531)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1208K (ffffffff818ee000 - ffffffff81a1c000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 884K (ffff880001523000 - ffff880001600000)
Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
udevd[81]: starting version 175
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
hv_vmbus: Hyper-V Host Build:9600-6.3-18-0.18119; Vmbus version:3.0
hv_vmbus: CPU offlining is not supported by hypervisor
SCSI subsystem initialized
hv_vmbus: registering driver hv_storvsc
scsi0 : storvsc_host_t
scsi 0:0:0:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 4
scsi1 : storvsc_host_t
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
scsi scan: INQUIRY result too short (5), using 36
sd 0:0:0:0: [sda] 104859648 512-byte logical blocks: (53.6 GB/50.0 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 0f 00 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
random: lvm: uninitialized urandom read (4 bytes read, 13 bits of entropy available)
random: lvm: uninitialized urandom read (2 bytes read, 17 bits of entropy available)
random: lvm: uninitialized urandom read (4 bytes read, 17 bits of entropy available)
random: lvm: uninitialized urandom read (2 bytes read, 20 bits of entropy available)
PM: Starting manual resume from disk
PM: Hibernation image partition 254:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
tsc: Refined TSC clocksource calibration: 2400.084 MHz
udevd[546]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: PC Speaker as /devices/platform/pcspkr/input/input3
hv_vmbus: registering driver hyperv_fb
hyperv_fb: Screen resolution: 1152x864, Color depth: 32
libata version 3.00 loaded.
Console: switching to colour frame buffer device 144x54
ata_piix 0000:00:07.1: version 2.13
ata_piix 0000:00:07.1: Hyper-V Virtual Machine detected, ATA device ignore set
scsi2 : ata_piix
scsi3 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
piix4_smbus 0000:00:07.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
Floppy drive(s): fd0 is 1.44M
hv_vmbus: registering driver hyperv_keyboard
hidraw: raw HID events driver (C) Jiri Kosina
hv_utils: Registering HyperV Utility Driver
hv_vmbus: registering driver hv_util
hv_vmbus: registering driver hid_hyperv
FDC 0 is an 82078.
input: Microsoft Vmbus HID-compliant Mouse as /devices/0006:045E:0621.0001/input/input5
hid 0006:045E:0621.0001: input: HID v0.01 Mouse [Microsoft Vmbus HID-compliant Mouse] on
hv_vmbus: registering driver hv_netvsc
hv_netvsc: hv_netvsc channel opened successfully
ata1.00: host indicates ignore ATA devices, ignored
ata2.00: ATAPI: Virtual CD, , max MWDMA2
ata2.00: configured for MWDMA2
scsi 3:0:0:0: CD-ROM Msft Virtual CD/ROM 1.0 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 0x/0x tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
psmouse serio1: alps: Unknown ALPS touchpad: E7=12 00 64, EC=12 00 64
random: nonblocking pool is initialized
psmouse serio1: trackpoint: failed to get extended button data
hv_netvsc vmbus_0_14: Send section size: 6144, Section count:170
hv_netvsc vmbus_0_14: Device MAC 00:1d:d8:b7:24:c3 link state up
EXT4-fs (dm-0): re-mounted. Opts: (null)
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
loop: module loaded
Adding 1949692k swap on /dev/mapper/vg_swap-lv_swap. Priority:-1 extents:1 across:1949692k FS
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x01, buttons: 0/0
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4
input: AT Translated Set 2 keyboard as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:07/VMBUS:01/vmbus_0_4/serio2/input/input6
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
nr_pdflush_threads exported in /proc is scheduled for removal
sysctl: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to linux-mm@kvack.org.
hrtimer: interrupt took 20196300 ns
hv_storvsc vmbus_0_1: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_1: stor pkt ffff88007a8e3900 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 0:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.
hv_storvsc vmbus_0_1: cmd 0x2a scsi status 0x2 srb status 0x82
hv_storvsc vmbus_0_1: stor pkt ffff8800269933c0 autosense data valid - len 18
storvsc: Sense Key : Unit Attention [current]
storvsc: Add. Sense: Changed operating definition
sd 0:0:0:0: Warning! Received an indication that the operating parameters on this target have changed. The Linux SCSI layer does not automatically adjust these parameters.