dmesg - test3
Linux version 4.8.0-36-generic (buildd@lgw01-18) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #36~16.04.1-Ubuntu SMP Sun Feb 5 09:39:57 UTC 2017 (Ubuntu 4.8.0-36.36~16.04.1-generic 4.8.11)
Command line: BOOT_IMAGE=(hd0,4)/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash persistent ---
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000098bff] usable
BIOS-e820: [mem 0x0000000000098c00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000069da0fff] usable
BIOS-e820: [mem 0x0000000069da1000-0x0000000069da1fff] ACPI NVS
BIOS-e820: [mem 0x0000000069da2000-0x0000000069debfff] reserved
BIOS-e820: [mem 0x0000000069dec000-0x000000006e8a6fff] usable
BIOS-e820: [mem 0x000000006e8a7000-0x000000006ec4afff] reserved
BIOS-e820: [mem 0x000000006ec4b000-0x000000006edc5fff] usable
BIOS-e820: [mem 0x000000006edc6000-0x000000006f3d1fff] ACPI NVS
BIOS-e820: [mem 0x000000006f3d2000-0x000000006fffefff] reserved
BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
BIOS-e820: [mem 0x0000000070000000-0x0000000077ffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000885bfffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: Supermicro Super Server/X11SAE-M, BIOS 1.0b 03/24/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x885c00 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 007C000000 mask 7FFC000000 uncachable
2 base 007A000000 mask 7FFE000000 uncachable
3 base 0079000000 mask 7FFF000000 uncachable
4 base 0078800000 mask 7FFF800000 uncachable
5 base 0078400000 mask 7FFFC00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x70000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcd00-0x000fcd0f] mapped at [ffff8d11c00fcd00]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8d11c0092000] 92000 size 24576
Using GB pages for direct mapping
BRK [0x48503b000, 0x48503bfff] PGTABLE
BRK [0x48503c000, 0x48503cfff] PGTABLE
BRK [0x48503d000, 0x48503dfff] PGTABLE
BRK [0x48503e000, 0x48503efff] PGTABLE
BRK [0x48503f000, 0x48503ffff] PGTABLE
BRK [0x485040000, 0x485040fff] PGTABLE
BRK [0x485041000, 0x485041fff] PGTABLE
BRK [0x485042000, 0x485042fff] PGTABLE
BRK [0x485043000, 0x485043fff] PGTABLE
BRK [0x485044000, 0x485044fff] PGTABLE
RAMDISK: [mem 0x34966000-0x364aafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 SUPERM)
ACPI: XSDT 0x000000006EE4E0B0 0000DC (v01 SUPERM SUPERM 01072009 AMI 00010013)
ACPI: FACP 0x000000006EE715A8 00010C (v05 01072009 AMI 00010013)
ACPI: DSDT 0x000000006EE4E220 023387 (v02 SUPERM SMCI--MB 01072009 INTL 20120913)
ACPI: FACS 0x000000006F3D0F80 000040
ACPI: APIC 0x000000006EE716B8 0000BC (v03 01072009 AMI 00010013)
ACPI: FPDT 0x000000006EE71778 000044 (v01 01072009 AMI 00010013)
ACPI: FIDT 0x000000006EE717C0 00009C (v01 01072009 AMI 00010013)
ACPI: MCFG 0x000000006EE71860 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: HPET 0x000000006EE718A0 000038 (v01 SUPERM SMCI--MB 01072009 AMI. 0005000B)
ACPI: LPIT 0x000000006EE718D8 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000006EE71970 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0x000000006EE71BB8 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
ACPI: SSDT 0x000000006EE74768 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
ACPI: DBGP 0x000000006EE75350 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x000000006EE75388 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000006EE753E0 0006FD (v02 INTEL xh_rvp08 00000000 INTL 20120913)
ACPI: SSDT 0x000000006EE75AE0 00546C (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x000000006EE7AF50 000042 (v01 00000000 00000000)
ACPI: SSDT 0x000000006EE7AF98 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: DMAR 0x000000006EE7BE10 000070 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: SPCR 0x000000006EE7BE80 000050 (v01 A M I APTIO V 01072009 AMI. 0005000B)
ACPI: ASF! 0x000000006EE7BED0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: EINJ 0x000000006EE7BF78 000130 (v01 AMI AMI.EINJ 00000000 AMI. 00000000)
ACPI: ERST 0x000000006EE7C0A8 000230 (v01 AMIER AMI.ERST 00000000 AMI. 00000000)
ACPI: BERT 0x000000006EE7C2D8 000030 (v01 AMI AMI.BERT 00000000 AMI. 00000000)
ACPI: HEST 0x000000006EE7C308 00027C (v01 AMI AMI.HEST 00000000 AMI. 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000885bfffff]
NODE_DATA(0) allocated [mem 0x885bfb000-0x885bfffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000885bfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000097fff]
node 0: [mem 0x0000000000100000-0x0000000069da0fff]
node 0: [mem 0x0000000069dec000-0x000000006e8a6fff]
node 0: [mem 0x000000006ec4b000-0x000000006edc5fff]
node 0: [mem 0x000000006ffff000-0x000000006fffffff]
node 0: [mem 0x0000000100000000-0x0000000885bfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000885bfffff]
On node 0 totalpages: 8340847
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3991 pages, LIFO batch:0
DMA32 zone: 7016 pages used for memmap
DMA32 zone: 448984 pages, LIFO batch:31
Normal zone: 123248 pages used for memmap
Normal zone: 7887872 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00098000-0x00098fff]
PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x69da1000-0x69da1fff]
PM: Registered nosave memory: [mem 0x69da2000-0x69debfff]
PM: Registered nosave memory: [mem 0x6e8a7000-0x6ec4afff]
PM: Registered nosave memory: [mem 0x6edc6000-0x6f3d1fff]
PM: Registered nosave memory: [mem 0x6f3d2000-0x6fffefff]
PM: Registered nosave memory: [mem 0x70000000-0x77ffffff]
PM: Registered nosave memory: [mem 0x78000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x78000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff8d1a45800000 s107864 r8192 d31400 u262144
pcpu-alloc: s107864 r8192 d31400 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8210498
Policy zone: Normal
Kernel command line: BOOT_IMAGE=(hd0,4)/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash persistent ---
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32726940K/33363388K available (8812K kernel code, 1439K rwdata, 3820K rodata, 1552K init, 1296K bss, 636448K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:488 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 3400.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6816.00 BogoMIPS (lpj=13632000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 7 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff89ced000 - ffffffff89cf5000)
ftrace: allocating 33410 entries in 131 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000006e992000 end: 0x0000006e9b1fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1230 v5 @ 3.40GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54528.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x69da1000-0x69da1fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x6edc6000-0x6f3d1fff] (6340608 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 0:29:23, date: 02/20/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 26 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8D1A216AD000 0006E4 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8D1A216A2C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8D1A216AC000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8D1A2173E200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Enabling Firmware First mode for corrected errors.
mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 10.
mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 11.
mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 12.
mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 13.
mce: [Firmware Bug]: Ignoring request to disable invalid MCA bank 14.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x78400000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:1918] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xde530000-0xde53ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xde555000-0xde555fff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xde554000-0xde554fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:16.3: [8086:a13d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0xf060-0xf067]
pci 0000:00:16.3: reg 0x14: [mem 0xde553000-0xde553fff]
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xde540000-0xde541fff]
pci 0000:00:17.0: reg 0x14: [mem 0xde552000-0xde5520ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xde551000-0xde5517ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xde54c000-0xde54ffff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xde548000-0xde54bfff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xde520000-0xde52ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xde550000-0xde5500ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xde500000-0xde51ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:01:00.0: [1002:7300] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xde400000-0xde43ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xde440000-0xde45ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [1002:aae8] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xde460000-0xde463fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde400000-0xde4fffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
pci 0000:00:1c.0: bridge window [mem 0xc8000000-0xde0fffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
pci 0000:3b:00.0: [8086:1533] type 00 class 0x020000
pci 0000:3b:00.0: reg 0x10: [mem 0xde300000-0xde37ffff]
pci 0000:3b:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:3b:00.0: reg 0x1c: [mem 0xde380000-0xde383fff]
pci 0000:3b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:3b:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 3b]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xde300000-0xde3fffff]
pci 0000:3c:00.0: [10e3:8113] type 01 class 0x060401
pci 0000:3c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:3c:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 3c-3d]
pci 0000:3c:00.0: PCI bridge to [bus 3d] (subtractive decode)
pci 0000:3e:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:3e:00.0: reg 0x10: [mem 0xde200000-0xde207fff 64bit]
pci 0000:3e:00.0: PME# supported from D3hot D3cold
pci 0000:3e:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: PCI bridge to [bus 3e]
pci 0000:00:1c.7: bridge window [mem 0xde200000-0xde2fffff]
pci 0000:3f:00.0: [144d:a804] type 00 class 0x010802
pci 0000:3f:00.0: reg 0x10: [mem 0xde100000-0xde103fff 64bit]
pci 0000:3f:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: PCI bridge to [bus 3f]
pci 0000:00:1d.0: bridge window [mem 0xde100000-0xde1fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 7F
SCSI subsystem initialized
libata version 3.00 loaded.
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00098c00-0x0009ffff]
e820: reserve RAM buffer [mem 0x69da1000-0x6bffffff]
e820: reserve RAM buffer [mem 0x6e8a7000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6edc6000-0x6fffffff]
e820: reserve RAM buffer [mem 0x885c00000-0x887ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: [io 0x0a40-0x0a4f] has been reserved
system 00:00: [io 0x0a50-0x0a5f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xff00-0xfffe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde400000-0xde4fffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xc8000000-0xde0fffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 3b]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xde300000-0xde3fffff]
pci 0000:3c:00.0: PCI bridge to [bus 3d]
pci 0000:00:1c.6: PCI bridge to [bus 3c-3d]
pci 0000:00:1c.7: PCI bridge to [bus 3e]
pci 0000:00:1c.7: bridge window [mem 0xde200000-0xde2fffff]
pci 0000:00:1d.0: PCI bridge to [bus 3f]
pci 0000:00:1d.0: bridge window [mem 0xde100000-0xde1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x78400000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde400000-0xde4fffff]
pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc01fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xc8000000-0xde0fffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0xa1ffffff 64bit pref]
pci_bus 0000:3b: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:3b: resource 1 [mem 0xde300000-0xde3fffff]
pci_bus 0000:3e: resource 1 [mem 0xde200000-0xde2fffff]
pci_bus 0000:3f: resource 1 [mem 0xde100000-0xde1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 27924K (ffff8d11f4966000 - ffff8d11f64ab000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x6a8a7000-0x6e8a7000] (64MB) mapped at [ffff8d122a8a7000-ffff8d122e8a6fff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1487550566.936:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.25)
Allocating IMA blacklist keyring.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: using zlib compression
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit.
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
0000:00:16.3: ttyS4 at I/O 0xf060 (irq = 19, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.8.0-36-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.8.0-36-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:3e:00.0: xHCI Host Controller
xhci_hcd 0000:3e:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:3e:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.8.0-36-generic xhci-hcd
usb usb3: SerialNumber: 0000:3e:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:3e:00.0: xHCI Host Controller
xhci_hcd 0000:3e:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.8.0-36-generic xhci-hcd
usb usb4: SerialNumber: 0000:3e:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-3: New USB device found, idVendor=0781, idProduct=5580
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: Extreme
usb 2-3: Manufacturer: SanDisk
usb 2-3: SerialNumber: AA010731141510202315
usb 1-6: new full-speed USB device number 2 using xhci_hcd
usb 1-6: New USB device found, idVendor=1b1c, idProduct=0c09
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: H100i v2
usb 1-6: Manufacturer: Corsair Components, Inc.
usb 1-6: SerialNumber: 7289_2.0
i8042: No controller found
tsc: Refined TSC clocksource calibration: 3408.009 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fdca3aab, max_idle_ns: 440795327205 ns
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc rtc0: invalid alarm value: 2017-2-20 0:60:28
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x506e3, pf=0x2, revision=0x84
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: d6d7cea0e8f669bd202f07c56eca22a865778209'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
BERT: Can't request iomem region .
Magic number: 5:400:456
mem urandom: hash matches
rtc_cmos 00:04: setting system clock to 2017-02-20 00:29:28 UTC (1487550568)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1552K (ffffffff89b69000 - ffffffff89ced000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1412K (ffff8d164469f000 - ffff8d1644800000)
Freeing unused kernel memory: 276K (ffff8d1644bbb000 - ffff8d1644c00000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
usb 1-12: new low-speed USB device number 3 using xhci_hcd
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
wmi: Mapper loaded
usb-storage 2-3:1.0: USB Mass Storage device detected
scsi host0: usb-storage 2-3:1.0
usbcore: registered new interface driver usb-storage
ahci 0000:00:17.0: version 3.0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
usbcore: registered new interface driver uas
PTP clock support registered
[drm] Initialized drm 1.1.0 20060810
dca service started, version 1.12.1
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
nvme nvme0: pci function 0000:3f:00.0
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
[drm] initializing kernel modesetting (FIJI 0x1002:0x7300 0x1002:0x0B36 0xCA).
[drm] register mmio base: 0xDE400000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xC0000000
[drm] doorbell mmio size: 2097152
[drm] probing gen 2 caps for device 8086:1901 = 261ad03/e
[drm] probing mlw for device 8086:1901 = 261ad03
[drm] UVD is enabled in physical mode
ATOM BIOS: 113
[drm] Changing default dispclk from 500Mhz to 600Mhz
amdgpu 0000:01:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used)
amdgpu 0000:01:00.0: GTT: 4096M 0x0000000100000000 - 0x00000001FFFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 512bits HBM
[TTM] Zone kernel: Available graphics memory: 16379068 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 1048576, num gpu pages 1048576
[drm] PCIE GART of 4096M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
Can't find requested voltage id in vdd_dep_on_sclk table!
pps pps0: new PPS source ptp0
igb 0000:3b:00.0: added PHC on eth0
igb 0000:3b:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:3b:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:cf:fb:af
igb 0000:3b:00.0: eth0: PBA No: 010B00-000
igb 0000:3b:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
amdgpu: powerplay initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD5
[drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DP-2
[drm] HPD4
[drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] DP-3
[drm] HPD3
[drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] Connector 3:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY2
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000100000008, cpu addr 0xffff8d1a184d3008
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000100000018, cpu addr 0xffff8d1a184d3018
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000100000028, cpu addr 0xffff8d1a184d3028
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000100000038, cpu addr 0xffff8d1a184d3038
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000100000048, cpu addr 0xffff8d1a184d3048
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000100000058, cpu addr 0xffff8d1a184d3058
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000100000068, cpu addr 0xffff8d1a184d3068
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000100000078, cpu addr 0xffff8d1a184d3078
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000100000088, cpu addr 0xffff8d1a184d3088
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x0000000100000098, cpu addr 0xffff8d1a184d3098
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000001000000a8, cpu addr 0xffff8d1a184d30a8
[drm] Found UVD firmware Version: 1.87 Family ID: 12
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x0000000000881e90, cpu addr 0xffffad5a43c3fe90
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x00000001000000c8, cpu addr 0xffff8d1a184d30c8
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000001000000d8, cpu addr 0xffff8d1a184d30d8
igb 0000:3b:00.0 eno2: renamed from eth0
[drm] ring test on 0 succeeded in 13 usecs
[drm] ring test on 1 succeeded in 26 usecs
[drm] ring test on 2 succeeded in 23 usecs
[drm] ring test on 3 succeeded in 5 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 3 usecs
[drm] ring test on 6 succeeded in 3 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] ring test on 8 succeeded in 3 usecs
[drm] ring test on 9 succeeded in 5 usecs
[drm] ring test on 10 succeeded in 5 usecs
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
ata1: SATA max UDMA/133 abar m2048@0xde551000 port 0xde551100 irq 35
ata2: SATA max UDMA/133 abar m2048@0xde551000 port 0xde551180 irq 35
ata3: SATA max UDMA/133 abar m2048@0xde551000 port 0xde551200 irq 35
ata4: SATA max UDMA/133 abar m2048@0xde551000 port 0xde551280 irq 35
ata5: SATA max UDMA/133 abar m2048@0xde551000 port 0xde551300 irq 35
ata6: SATA max UDMA/133 abar m2048@0xde551000 port 0xde551380 irq 35
ata7: SATA max UDMA/133 abar m2048@0xde551000 port 0xde551400 irq 35
ata8: SATA max UDMA/133 abar m2048@0xde551000 port 0xde551480 irq 35
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[drm] ring test on 11 succeeded in 2 usecs
[drm] UVD initialized successfully.
usb 1-12: New USB device found, idVendor=04d9, idProduct=a01c
usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-12: Product: Wireless USB Device
usb 1-12: Manufacturer: HOLTEK
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:04D9:A01C.0001/input/input3
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
hid-generic 0003:04D9:A01C.0001: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-0000:00:14.0-12/input0
input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.1/0003:04D9:A01C.0002/input/input4
[drm] ring test on 12 succeeded in 21 usecs
[drm] ring test on 13 succeeded in 5 usecs
[drm] VCE initialized successfully.
nvme0n1: p1
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:cf:fb:ae
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 010CFF-0FF
e1000e 0000:00:1f.6 eno1: renamed from eth0
hid-generic 0003:04D9:A01C.0002: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-0000:00:14.0-12/input1
ata8: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133
ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133
ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD40EFRX-68W 0A82 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 2:0:0:0: Direct-Access ATA WDC WD40EFRX-68W 0A82 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 sdb3
sd 2:0:0:0: [sdb] Attached SCSI disk
[drm] fb mappable at 0xB0C02000
[drm] vram apper at 0xB0000000
[drm] size 5324800
[drm] fb depth is 24
[drm] pitch is 5888
fbcon: amdgpudrmfb (fb0) is primary device
clocksource: Switched to clocksource tsc
scsi 0:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
sd 0:0:0:0: Attached scsi generic sg2 type 0
sd 0:0:0:0: [sdc] 30651688 512-byte logical blocks: (15.7 GB/14.6 GiB)
sd 0:0:0:0: [sdc] Write Protect is off
sd 0:0:0:0: [sdc] Mode Sense: 33 00 00 08
sd 0:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc3 sdc4 sdc5
random: fast init done
sd 0:0:0:0: [sdc] Attached SCSI disk
Console: switching to colour frame buffer device 180x56
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
pp_set_clockgating_state was not implemented.
[drm] Initialized amdgpu 3.3.0 20150101 for 0000:01:00.0 on minor 0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
random: crng init done
EXT4-fs (sdc5): warning: mounting unchecked fs, running e2fsck is recommended
EXT4-fs (sdc5): mounted filesystem without journal. Opts: (null)
aufs 4.x-rcN-20160912
Adding 2097084k swap on /dev/sdb2. Priority:-1 extents:1 across:2097084k FS
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Remote File Systems.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd-journald[2688]: Received request to flush runtime journal from PID 1
EDAC MC: Ver: 3.0.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED)
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol BCM registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888-VD: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized