dmesg - Dcraw
Linux version 4.8.13-1-ARCH (builduser@tobias) (gcc version 6.2.1 20160830 (GCC) ) #1 SMP PREEMPT Fri Dec 9 07:24:34 CET 2016
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000004e56efff] usable
BIOS-e820: [mem 0x000000004e56f000-0x000000004e770fff] reserved
BIOS-e820: [mem 0x000000004e771000-0x00000000cb067fff] usable
BIOS-e820: [mem 0x00000000cb068000-0x00000000cce8efff] reserved
BIOS-e820: [mem 0x00000000cce8f000-0x00000000ccf9efff] ACPI NVS
BIOS-e820: [mem 0x00000000ccf9f000-0x00000000ccffefff] ACPI data
BIOS-e820: [mem 0x00000000ccfff000-0x00000000ccffffff] usable
BIOS-e820: [mem 0x00000000cd000000-0x00000000cf9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 20404/Lenovo Flex 2-14, BIOS A0CN31WW 10/08/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x12f600 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask 7FE0000000 uncachable
1 base 00D0000000 mask 7FF0000000 uncachable
2 base 00CE000000 mask 7FFE000000 uncachable
3 base 00CD000000 mask 7FFF000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xcd000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0130-0x000f013f] mapped at [ffff8800000f0130]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x01d4d000, 0x01d4dfff] PGTABLE
BRK [0x01d4e000, 0x01d4efff] PGTABLE
BRK [0x01d4f000, 0x01d4ffff] PGTABLE
BRK [0x01d50000, 0x01d50fff] PGTABLE
BRK [0x01d51000, 0x01d51fff] PGTABLE
BRK [0x01d52000, 0x01d52fff] PGTABLE
RAMDISK: [mem 0x374bb000-0x37a54fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0150 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000CCFFE170 0000BC (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: FACP 0x00000000CCFFB000 00010C (v05 LENOVO CB-01 00000001 LENO 00000001)
ACPI: DSDT 0x00000000CCFE6000 010A81 (v02 LENOVO HSW-LPT 00000000 INTL 20120711)
ACPI: FACS 0x00000000CCF9C000 000040
ACPI: ASF! 0x00000000CCFFD000 0000A5 (v32 LENOVO CB-01 00000001 LENO 00000001)
ACPI: HPET 0x00000000CCFFA000 000038 (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: LPIT 0x00000000CCFF9000 000094 (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: APIC 0x00000000CCFF8000 000098 (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: MCFG 0x00000000CCFF7000 00003C (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: SSDT 0x00000000CCFE5000 000228 (v01 LENOVO sensrhub 00000000 INTL 20120711)
ACPI: SSDT 0x00000000CCFE2000 002028 (v01 LENOVO PtidDevc 00001000 INTL 20120711)
ACPI: SSDT 0x00000000CCFE1000 0004F7 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x00000000CCFE0000 000AD8 (v01 LENOVO CpuPm 00003000 INTL 20120711)
ACPI: SSDT 0x00000000CCFDC000 003536 (v01 LENOVO SaSsdt 00003000 INTL 20120711)
ACPI: UEFI 0x00000000CCFDB000 000042 (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: MSDM 0x00000000CCF76000 000055 (v03 LENOVO CB-01 00000001 LENO 00000001)
ACPI: BATB 0x00000000CCFDA000 000046 (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: FPDT 0x00000000CCFD9000 000064 (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: SLIC 0x00000000CCFD8000 000176 (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: UEFI 0x00000000CCFD7000 0002BA (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: CSRT 0x00000000CCFD5000 0000C4 (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: DMAR 0x00000000CCFD4000 0000A8 (v01 LENOVO CB-01 00000001 LENO 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012f5fffff]
NODE_DATA(0) allocated [mem 0x12f5f7000-0x12f5fbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000012f5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x000000004e56efff]
node 0: [mem 0x000000004e771000-0x00000000cb067fff]
node 0: [mem 0x00000000ccfff000-0x00000000ccffffff]
node 0: [mem 0x0000000100000000-0x000000012f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000012f5fffff]
On node 0 totalpages: 1025027
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12922 pages used for memmap
DMA32 zone: 826983 pages, LIFO batch:31
Normal zone: 3032 pages used for memmap
Normal zone: 194048 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000cda00000-0x00000000cf9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x4e56f000-0x4e770fff]
PM: Registered nosave memory: [mem 0xcb068000-0xcce8efff]
PM: Registered nosave memory: [mem 0xcce8f000-0xccf9efff]
PM: Registered nosave memory: [mem 0xccf9f000-0xccffefff]
PM: Registered nosave memory: [mem 0xcd000000-0xcf9fffff]
PM: Registered nosave memory: [mem 0xcfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
e820: [mem 0xcfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff88012f200000 s103128 r8192 d32040 u262144
pcpu-alloc: s103128 r8192 d32040 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1008988
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3947648K/4100108K available (6131K kernel code, 1051K rwdata, 1912K rodata, 1256K init, 1036K bss, 152460K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:760 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1895.552 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3792.06 BogoMIPS (lpj=6318506)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 24K (ffffffff81c42000 - ffffffff81c48000)
ftrace: allocating 24335 entries in 96 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 4
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
DMAR: RMRR base: 0x000000cc65f000 end: 0x000000cc675fff
DMAR: RMRR base: 0x000000cd800000 end: 0x000000cf9fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-4030U CPU @ 1.90GHz (family: 0x6, model: 0x45, stepping: 0x1)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (15175.04 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xcce8f000-0xccf9efff] (1114112 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 21:58:04, date: 02/16/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880129A68C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880129907000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880129A5D400 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xe0610000-0xe0613fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xe0600000-0xe060ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xe0619000-0xe061901f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe0614000-0xe0617fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:1f.2: reg 0x24: [mem 0xe061c000-0xe061c7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xe0618000-0xe06180ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0507fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [mem 0xe0500000-0xe05fffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:03:00.0: reg 0x18: [mem 0xe0404000-0xe0404fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xe0400000-0xe0403fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xe0400000-0xe04fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 9 GPEs in block 00 to 7F
ACPI : EC: EC stopped
ACPI : EC: GPE = 0x22, I/O: command/status = 0x66, data = 0x62
ACPI : EC: EC started
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0x4e56f000-0x4fffffff]
e820: reserve RAM buffer [mem 0xcb068000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
e820: reserve RAM buffer [mem 0x12f600000-0x12fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs SYN2b3a PNP0f13 SYN2b00 SYN0002 (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xcfa00000-0xcfa0ffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
system 00:06: [mem 0xfe108000-0xfe108fff] has been reserved
system 00:06: [mem 0xfe10a000-0xfe10afff] has been reserved
system 00:06: [mem 0xfe10c000-0xfe10cfff] has been reserved
system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved
system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved
system 00:06: [mem 0xfe111000-0xfe111007] has been reserved
system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [mem 0xe0500000-0xe05fffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xe0400000-0xe04fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff window]
pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xe0400000-0xe04fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:14.0: can't derive routing for PCI INT A
pci 0000:00:14.0: PCI INT A: no GSI
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 5736K (ffff8800374bb000 - ffff880037a55000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc7068000-0xcb068000] (64MB) mapped at [ffff8800c7068000-ffff8800cb067fff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=20 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 5:847:1005
rtc_cmos 00:01: setting system clock to 2017-02-16 21:58:05 UTC (1487282285)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1256K (ffffffff81b08000 - ffffffff81c42000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 2044K (ffff880001601000 - ffff880001800000)
Freeing unused kernel memory: 136K (ffff8800019de000 - ffff880001a00000)
random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
xhci_hcd 0000:00:14.0: PCI INT A: no GSI
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
libata version 3.00 loaded.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xe061c000 port 0xe061c100 irq 43
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
usb 1-4: new high-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: WDC WD5000LPCX-24C6HT0, 02.01A02, max UDMA/133
ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPCX-2 1A02 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-6: new full-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 1895.611 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a5f415104, max_idle_ns: 881590682539 ns
usb 1-8: new full-speed USB device number 4 using xhci_hcd
random: fast init done
clocksource: Switched to clocksource tsc
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting Debug File System...
EXT4-fs (sda9): re-mounted. Opts: data=ordered
usb 1-3: new full-speed USB device number 5 using xhci_hcd
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
wmi: Mapper loaded
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
systemd-journald[156]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [ADP1] (off-line)
hidraw: raw HID events driver (C) Jiri Kosina
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
[drm] Initialized drm 1.1.0 20060810
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (34 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (33 C)
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[drm] Memory usable by graphics device = 2048M
checking generic (d0000000 410000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4682]
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
media: Linux media interface: v0.10
[drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1172..]
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127c00/0x0, board id: 2334, fw id: 1508589
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc9000065c000, 54:ee:75:3c:6e:8f, XID 10900800 IRQ 48
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
Linux video capture interface: v2.00
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:055e)
uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: PC Speaker as /devices/platform/pcspkr/input/input15
kvm: disabled by bios
kvm: disabled by bios
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
wl: loading out-of-tree module taints kernel.
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver btusb
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
asus_wmi: Asus Management GUID not found
r8169 0000:03:00.0 enp3s0: renamed from eth0
mousedev: PS/2 mouse device common for all mice
Adding 8388604k swap on /dev/sda8. Priority:-1 extents:1 across:8388604k FS
wl 0000:02:00.0 wlp2s0: renamed from wlan0
input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:062A:5918.0002/input/input16
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:04F3:0333.0001/input/input17
hid-generic 0003:062A:5918.0002: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-3/input0
hid-multitouch 0003:04F3:0333.0001: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-8/input0
input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:062A:5918.0003/input/input19
hid-generic 0003:062A:5918.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:14.0-3/input1
Bluetooth: hci0 command 0x1001 tx timeout
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
ERROR @wl_notify_scan_status : wlp2s0 Scan_results error (-22)
Bluetooth: hci0: BCM: Reading local version info failed (-110)
fuse init (API version 7.25)
usb 1-8: USB disconnect, device number 4
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds)
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 638.542 msecs
PM: late suspend of devices complete after 16.193 msecs
r8169 0000:03:00.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.910 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 126.517 msecs
PM: early resume of devices complete after 0.520 msecs
r8169 0000:03:00.0: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
rtc_cmos 00:01: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
r8169 0000:03:00.0 enp3s0: link down
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4682]
psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1172..]
usb 1-4: reset high-speed USB device number 2 using xhci_hcd
PM: resume of devices complete after 712.190 msecs
usb 1-6:1.0: rebind failed: -517
usb 1-6:1.1: rebind failed: -517
usb 1-6:1.2: rebind failed: -517
PM: Finishing wakeup.
Restarting tasks ...
pci_bus 0000:01: Allocating resources
pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
pci_bus 0000:02: Allocating resources
pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci_bus 0000:03: Allocating resources
pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xcfb00000-0xcfcfffff]
pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xcfd00000-0xcfefffff 64bit pref]
pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xe0700000-0xe08fffff 64bit pref]
pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xe0900000-0xe0afffff 64bit pref]
pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pcieport 0000:00:1c.2: BAR 13: assigned [io 0x5000-0x5fff]
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
done.
usb 1-8: new full-speed USB device number 6 using xhci_hcd
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:04F3:0333.0004/input/input20
hid-multitouch 0003:04F3:0333.0004: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-8/input0
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Bluetooth: hci0 command 0x1001 tx timeout
ERROR @wl_notify_scan_status : wlp2s0 Scan_results error (-22)
Bluetooth: hci0: BCM: Reading local version info failed (-110)
usb 1-8: USB disconnect, device number 6
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds)
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 631.108 msecs
PM: late suspend of devices complete after 15.695 msecs
r8169 0000:03:00.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 17.119 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 133.132 msecs
PM: early resume of devices complete after 0.520 msecs
r8169 0000:03:00.0: System wakeup disabled by ACPI
rtc_cmos 00:01: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
r8169 0000:03:00.0 enp3s0: link down
usb 1-6: reset full-speed USB device number 3 using xhci_hcd
psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4682]
psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1172..]
usb 1-4: reset high-speed USB device number 2 using xhci_hcd
PM: resume of devices complete after 708.814 msecs
usb 1-6:1.0: rebind failed: -517
usb 1-6:1.1: rebind failed: -517
usb 1-6:1.2: rebind failed: -517
PM: Finishing wakeup.
Restarting tasks ...
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
done.
Bluetooth: hci0: BCM: chip id 70
Bluetooth: hci0: BCM43142A
Bluetooth: hci0: BCM (001.001.011) build 0000
usb 1-8: new full-speed USB device number 7 using xhci_hcd
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:04F3:0333.0005/input/input22
hid-multitouch 0003:04F3:0333.0005: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-8/input0
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
ERROR @wl_cfg80211_scan : WLC_SCAN error (-22)
Bluetooth: hci0 command 0x1003 tx timeout
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
perf: interrupt took too long (2558 > 2500), lowering kernel.perf_event_max_sample_rate to 78000
perf: interrupt took too long (3212 > 3197), lowering kernel.perf_event_max_sample_rate to 62100