dmesg - asd
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.3-040203-generic (kernel@gomeisa) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) ) #201510030832 SMP Sat Oct 3 12:34:31 UTC 2015
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000040000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000007acc0fff] usable
BIOS-e820: [mem 0x000000007acc1000-0x000000007ad3bfff] reserved
BIOS-e820: [mem 0x000000007ad3c000-0x000000007af0ffff] usable
BIOS-e820: [mem 0x000000007af10000-0x000000007b675fff] ACPI NVS
BIOS-e820: [mem 0x000000007b676000-0x000000007b941fff] reserved
BIOS-e820: [mem 0x000000007b942000-0x000000007b997fff] type 20
BIOS-e820: [mem 0x000000007b998000-0x000000007bffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ESRT=0x7b93e218 ACPI=0x7af94000 ACPI 2.0=0x7af94000 SMBIOS=0x7b881e18
esrt: Reserving ESRT space from 0x000000007b93e218 to 0x000000007b93e250.
SMBIOS 2.8 present.
DMI: Notebook W510LU/W510LU, BIOS 5.11 02/19/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07C800000 mask FFF800000 uncachable
2 base 07D000000 mask FFF000000 uncachable
3 base 07E000000 mask FFE000000 uncachable
4 base 090000000 mask FF0000000 write-through
5 base 0A0000000 mask FFFF00000 write-through
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02fee000, 0x02feefff] PGTABLE
BRK [0x02fef000, 0x02feffff] PGTABLE
BRK [0x02ff0000, 0x02ff0fff] PGTABLE
init_memory_mapping: [mem 0x7a800000-0x7a9fffff]
[mem 0x7a800000-0x7a9fffff] page 2M
BRK [0x02ff1000, 0x02ff1fff] PGTABLE
init_memory_mapping: [mem 0x60000000-0x7a7fffff]
[mem 0x60000000-0x7a7fffff] page 2M
init_memory_mapping: [mem 0x40000000-0x5fffffff]
[mem 0x40000000-0x5fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x3fffffff]
[mem 0x20200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x7aa00000-0x7acc0fff]
[mem 0x7aa00000-0x7abfffff] page 2M
[mem 0x7ac00000-0x7acc0fff] page 4k
BRK [0x02ff2000, 0x02ff2fff] PGTABLE
init_memory_mapping: [mem 0x7ad3c000-0x7af0ffff]
[mem 0x7ad3c000-0x7af0ffff] page 4k
BRK [0x02ff3000, 0x02ff3fff] PGTABLE
init_memory_mapping: [mem 0x7b998000-0x7bffffff]
[mem 0x7b998000-0x7b9fffff] page 4k
[mem 0x7ba00000-0x7bffffff] page 2M
RAMDISK: [mem 0x35bd2000-0x36de0fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007AF94000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007AF94090 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000007AF9E9B8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150619/tbfadt-623)
ACPI: DSDT 0x000000007AF941C0 00A7F6 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x000000007B675E80 000040
ACPI: APIC 0x000000007AF9EAC8 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000007AF9EB50 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000007AF9EB98 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000007AF9EC38 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000007AF9EC78 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 0x000000007AF9F3E0 000202 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 0x000000007AF9F5E8 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
ACPI: UEFI 0x000000007AF9F768 000042 (v01 ALASKA A M I 00000000 00000000)
ACPI: LPIT 0x000000007AF9F7B0 000104 (v01 ALASKA A M I 00000005 MSFT 0100000D)
ACPI: TPM2 0x000000007AF9F8B8 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
ACPI: CSRT 0x000000007AF9F8F0 00014C (v00 INTEL LANFORDC 00000005 MSFT 0100000D)
ACPI: SSDT 0x000000007AF9FA40 000615 (v01 CpuDpf CpuDptf 00001000 INTL 20061109)
ACPI: SSDT 0x000000007AFA0058 000783 (v01 DptfTb DptfTab 00001000 INTL 20061109)
ACPI: BGRT 0x000000007AFA07E0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007bffffff]
NODE_DATA(0) allocated [mem 0x7af0a000-0x7af0efff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880076400000-ffff8800783fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000007bffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000003efff]
node 0: [mem 0x0000000000040000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x000000007acc0fff]
node 0: [mem 0x000000007ad3c000-0x000000007af0ffff]
node 0: [mem 0x000000007b998000-0x000000007bffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007bffffff]
On node 0 totalpages: 504473
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 7872 pages used for memmap
DMA32 zone: 500477 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x7ce00000-0x7edfffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x7acc1000-0x7ad3bfff]
PM: Registered nosave memory: [mem 0x7af10000-0x7b675fff]
PM: Registered nosave memory: [mem 0x7b676000-0x7b941fff]
PM: Registered nosave memory: [mem 0x7b942000-0x7b997fff]
e820: [mem 0x7ee00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88007a800000 s96344 r8192 d30632 u524288
pcpu-alloc: s96344 r8192 d30632 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 496515
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1914472K/2017892K available (7866K kernel code, 1235K rwdata, 3844K rodata, 1456K init, 1292K bss, 103420K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1024 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
Console: colour dummy device 80x25
console [tty0] enabled
tsc: PIT calibration matches PMTIMER. 1 loops
tsc: Detected 1599.925 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.85 BogoMIPS (lpj=6399700)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
process: using mwait in idle threads
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ea2000 - ffffffff81ea9000)
Ignoring BGRT: invalid status 0 (expected 1)
ftrace: allocating 30762 entries in 121 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Celeron(R) CPU N3150 @ 1.60GHz (fam: 06, model: 4c, stepping: 03)
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000ffffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
CPU2: Thermal monitoring handled by SMI
#3[ 0.125645] CPU3: Thermal monitoring handled by SMI
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (12799.40 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7af10000-0x7b675fff] (7757824 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 18:19:39, date: 02/15/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880076382800 000613 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800763B5C00 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800763B1C00 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800763E8000 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [USBC] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x80000000-0x80ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
pci 0000:00:0b.0: reg 0x10: [mem 0x8141f000-0x8141ffff 64bit]
pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
pci 0000:00:13.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:13.0: reg 0x24: [mem 0x8141e000-0x8141e7ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x81400000-0x8140ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0x81100000-0x811fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0x81000000-0x810fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x81414000-0x81417fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:22ca] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x81418000-0x8141801f]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10ec:5286] type 00 class 0xff0000
pci 0000:01:00.0: reg 0x10: [mem 0x81300000-0x8130ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.2: [10ec:8136] type 00 class 0x020000
pci 0000:01:00.2: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:01:00.2: reg 0x18: [mem 0x81310000-0x81310fff 64bit]
pci 0000:01:00.2: reg 0x20: [mem 0xa0000000-0xa0003fff 64bit pref]
pci 0000:01:00.2: supports D1 D2
pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0x81300000-0x813fffff]
pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xa00fffff 64bit pref]
pci 0000:02:00.0: [8086:3165] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0x81200000-0x81201fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0x81200000-0x812fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7acc1000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7af10000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0500-0x05fe] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs SYN1212 PNP0f13 (active)
system 00:04: [mem 0x8141d000-0x8141dfff] has been reserved
system 00:04: [mem 0x8141b000-0x8141bfff] has been reserved
system 00:04: [mem 0x81419000-0x81419fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:05: [mem 0xfed06000-0xfed06fff] has been reserved
system 00:05: [mem 0xfed08000-0xfed09fff] has been reserved
system 00:05: [mem 0xfed80000-0xfedbffff] has been reserved
system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
clocksource: Switched to clocksource acpi_pm
pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.1: BAR 15: assigned [mem 0x81500000-0x816fffff 64bit pref]
pci 0000:00:1c.1: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0x81300000-0x813fffff]
pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xa00fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.1: bridge window [mem 0x81200000-0x812fffff]
pci 0000:00:1c.1: bridge window [mem 0x81500000-0x816fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0x81300000-0x813fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xa00fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0x81200000-0x812fffff]
pci_bus 0000:02: resource 2 [mem 0x81500000-0x816fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18492K (ffff880035bd2000 - ffff880036de1000)
microcode: CPU0 sig=0x406c3, pf=0x1, revision=0x35e
microcode: CPU1 sig=0x406c3, pf=0x1, revision=0x35e
microcode: CPU2 sig=0x406c3, pf=0x1, revision=0x35e
microcode: CPU3 sig=0x406c3, pf=0x1, revision=0x35e
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1487182780.087:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0x90000000, mapped to 0xffffc90000800000, using 4160k, total 4160k
efifb: mode is 1366x768x32, linelength=5504, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x33000020
intel_idle: v0.4 model 0x4C
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (off-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (51 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.3-040203-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 7 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.3-040203-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: cee65bc1e3077f6ff5587752ac203f9d65f705da'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 5:283:342
rtc_cmos 00:00: setting system clock to 2017-02-15 18:19:41 UTC (1487182781)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1456K (ffffffff81d36000 - ffffffff81ea2000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 312K (ffff8800027b2000 - ffff880002800000)
Freeing unused kernel memory: 252K (ffff880002bc1000 - ffff880002c00000)
systemd-udevd[119]: starting version 204
rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
rtsx_pci 0000:01:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 116
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq ilck stag led clo only pio slum part deso sadm sds apst
scsi host0: ahci
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.2: can't disable ASPM; OS doesn't have ASPM control
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0x8141e000 port 0x8141e100 irq 117
ata2: SATA max UDMA/133 abar m2048@0x8141e000 port 0x8141e180 irq 117
r8169 0000:01:00.2 eth0: RTL8402 at 0xffffc900003d8000, 80:fa:5b:2d:46:c7, XID 04000800 IRQ 118
usb 1-4: new full-speed USB device number 2 using xhci_hcd
tsc: Refined TSC clocksource calibration: 1599.956 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x170ffb6cc55, max_idle_ns: 440795225954 ns
ata1: SATA link down (SStatus 4 SControl 300)
usb 1-4: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-5: new high-speed USB device number 3 using xhci_hcd
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-10: Phison SSEP016GTMC0-S91, S9FM02.5, max UDMA/133
ata2.00: 31277232 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Phison SSEP016GT 02.5 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 1:0:0:0: [sda] Attached SCSI disk
usb 1-5: New USB device found, idVendor=04f2, idProduct=b54e
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-5: Product: Chicony USB 2.0 Camera
usb 1-5: Manufacturer: Chicony Electronics Co.,Ltd.
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
psmouse serio2: synaptics: queried max coordinates: x [..5692], y [..4680]
clocksource: Switched to clocksource tsc
psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
EXT4-fs (sda2): orphan cleanup on readonly fs
EXT4-fs (sda2): 118 orphan inodes deleted
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 33 bits of entropy available
init: plymouth-upstart-bridge main process (186) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (196) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (199) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: ureadahead main process (189) terminated with status 5
Adding 1974268k swap on /dev/sda3. Priority:-1 extents:1 across:1974268k SSFS
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-udevd[343]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
proc_thermal 0000:00:0b.0: enabling device (0000 -> 0002)
wmi: Mapper loaded
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[drm] Memory usable by graphics device = 1024M
checking generic (90000000 410000) vs hw (90000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usbcore: registered new interface driver btusb
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: hci0: read Intel version: 370810011003110e00
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
[drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] GMBUS [i915 gmbus panel] timed out, falling back to bit banging on pin 3
fbcon: inteldrmfb (fb0) is primary device
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
media: Linux media interface: v0.10
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit: type=1400 audit(1487182784.772:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=510 comm="apparmor_parser"
audit: type=1400 audit(1487182784.772:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=510 comm="apparmor_parser"
audit: type=1400 audit(1487182784.772:4): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=510 comm="apparmor_parser"
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
Linux video capture interface: v2.00
SSE version of gcm_enc/dec engaged.
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-15.ucode failed with error -2
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-14.ucode failed with error -2
iwlwifi 0000:02:00.0: loaded firmware version 25.30.13.0 op_mode iwlmvm
uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b54e)
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
audit: type=1400 audit(1487182786.300:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=618 comm="apparmor_parser"
audit: type=1400 audit(1487182786.300:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=618 comm="apparmor_parser"
audit: type=1400 audit(1487182786.300:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=618 comm="apparmor_parser"
audit: type=1400 audit(1487182786.300:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=618 comm="apparmor_parser"
audit: type=1400 audit(1487182786.300:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=618 comm="apparmor_parser"
audit: type=1400 audit(1487182786.300:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=618 comm="apparmor_parser"
init: cups main process (617) killed by HUP signal
init: cups main process ended, respawning
random: nonblocking pool is initialized
init: failsafe main process (721) killed by TERM signal
init: samba-ad-dc main process (864) terminated with status 1
audit: type=1400 audit(1487182787.784:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=901 comm="apparmor_parser"
audit: type=1400 audit(1487182787.784:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=901 comm="apparmor_parser"
audit: type=1400 audit(1487182787.784:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=901 comm="apparmor_parser"
audit: type=1400 audit(1487182787.788:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=901 comm="apparmor_parser"
r8169 0000:01:00.2 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: nvidia-prime main process (995) terminated with status 127
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1215) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (1433) terminated with status 1
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x1 status=17 aid=0)
wlan0: 50:06:04:e6:fa:3b denied association (code=17)
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: associate with 50:06:04:e6:fa:3b (try 2/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x1 status=12 aid=0)
wlan0: 50:06:04:e6:fa:3b denied association (code=12)
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x1 status=17 aid=0)
wlan0: 50:06:04:e6:fa:3b denied association (code=17)
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x1 status=17 aid=0)
wlan0: 50:06:04:e6:fa:3b denied association (code=17)
audit_printk_skb: 141 callbacks suppressed
audit: type=1400 audit(1487182816.516:62): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=2038 comm="apparmor_parser"
audit: type=1400 audit(1487182816.516:63): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2038 comm="apparmor_parser"
audit: type=1400 audit(1487182816.516:64): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2038 comm="apparmor_parser"
wlan0: authenticate with 50:06:04:e6:fa:34
wlan0: direct probe to 50:06:04:e6:fa:34 (try 1/3)
wlan0: direct probe to 50:06:04:e6:fa:34 (try 2/3)
wlan0: direct probe to 50:06:04:e6:fa:34 (try 3/3)
wlan0: authentication with 50:06:04:e6:fa:34 timed out
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x1 status=17 aid=0)
wlan0: 50:06:04:e6:fa:3b denied association (code=17)
wlan0: authenticate with 50:06:04:e6:fa:34
wlan0: direct probe to 50:06:04:e6:fa:34 (try 1/3)
wlan0: direct probe to 50:06:04:e6:fa:34 (try 2/3)
wlan0: direct probe to 50:06:04:e6:fa:34 (try 3/3)
wlan0: authentication with 50:06:04:e6:fa:34 timed out
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x11 status=0 aid=165)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: Limiting TX power to 14 dBm as advertised by 50:06:04:e6:fa:3b
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
perf interrupt took too long (3602 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
perf interrupt took too long (5013 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
wlan0: Limiting TX power to 14 dBm as advertised by 50:06:04:e6:fa:3b
wlan0: Limiting TX power to 14 dBm as advertised by 50:06:04:e6:fa:3b
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x11 status=0 aid=165)
wlan0: associated
wlan0: Limiting TX power to 14 dBm as advertised by 50:06:04:e6:fa:3b
wlan0: authenticate with 50:06:04:e6:fa:34
wlan0: direct probe to 50:06:04:e6:fa:34 (try 1/3)
wlan0: direct probe to 50:06:04:e6:fa:34 (try 2/3)
wlan0: direct probe to 50:06:04:e6:fa:34 (try 3/3)
wlan0: authentication with 50:06:04:e6:fa:34 timed out
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x11 status=0 aid=165)
wlan0: associated
wlan0: Limiting TX power to 14 dBm as advertised by 50:06:04:e6:fa:3b
wlan0: Limiting TX power to 14 dBm as advertised by 50:06:04:e6:fa:3b
[drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=3230953 end=3230954)
audit: type=1400 audit(1487241305.233:65): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=26730 comm="apparmor_parser"
audit: type=1400 audit(1487241305.233:66): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=26730 comm="apparmor_parser"
audit: type=1400 audit(1487241305.237:67): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=26730 comm="apparmor_parser"
wlan0: Limiting TX power to 14 dBm as advertised by 50:06:04:e6:fa:3b
wlan0: Limiting TX power to 14 dBm as advertised by 50:06:04:e6:fa:3b
wlan0: Limiting TX power to 14 dBm as advertised by 50:06:04:e6:fa:3b
usb 1-2: new low-speed USB device number 4 using xhci_hcd
usb 1-2: New USB device found, idVendor=0000, idProduct=0538
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB OPTICAL MOUSE
usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0000:0538.0001/input/input18
hid-generic 0003:0000:0538.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-2/input0
wlan0: authenticate with f4:cf:e2:55:85:14
wlan0: direct probe to f4:cf:e2:55:85:14 (try 1/3)
wlan0: send auth to f4:cf:e2:55:85:14 (try 2/3)
wlan0: authenticated
wlan0: associate with f4:cf:e2:55:85:14 (try 1/3)
wlan0: RX AssocResp from f4:cf:e2:55:85:14 (capab=0x421 status=17 aid=0)
wlan0: f4:cf:e2:55:85:14 denied association (code=17)
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x1 status=17 aid=0)
wlan0: 50:06:04:e6:fa:3b denied association (code=17)
wlan0: authenticate with f4:cf:e2:55:85:1b
wlan0: send auth to f4:cf:e2:55:85:1b (try 1/3)
wlan0: authenticated
wlan0: associate with f4:cf:e2:55:85:1b (try 1/3)
wlan0: RX AssocResp from f4:cf:e2:55:85:1b (capab=0x1 status=17 aid=0)
wlan0: f4:cf:e2:55:85:1b denied association (code=17)
wlan0: authenticate with f4:cf:e2:55:85:14
wlan0: send auth to f4:cf:e2:55:85:14 (try 1/3)
wlan0: authenticated
wlan0: associate with f4:cf:e2:55:85:14 (try 1/3)
wlan0: RX AssocResp from f4:cf:e2:55:85:14 (capab=0x431 status=0 aid=138)
wlan0: associated
wlan0: Limiting TX power to 13 dBm as advertised by f4:cf:e2:55:85:14
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x11 status=0 aid=23)
wlan0: associated
wlan0: Limiting TX power to 14 dBm as advertised by 50:06:04:e6:fa:3b
wlan0: authenticate with 50:06:04:e6:fa:34
wlan0: send auth to 50:06:04:e6:fa:34 (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:34 (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:34 (capab=0x421 status=17 aid=0)
wlan0: 50:06:04:e6:fa:34 denied association (code=17)
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x1 status=17 aid=0)
wlan0: 50:06:04:e6:fa:3b denied association (code=17)
wlan0: authenticate with f4:cf:e2:55:85:1b
wlan0: send auth to f4:cf:e2:55:85:1b (try 1/3)
wlan0: authenticated
wlan0: associate with f4:cf:e2:55:85:1b (try 1/3)
wlan0: RX AssocResp from f4:cf:e2:55:85:1b (capab=0x1 status=17 aid=0)
wlan0: f4:cf:e2:55:85:1b denied association (code=17)
wlan0: authenticate with 50:06:04:e6:fa:34
wlan0: send auth to 50:06:04:e6:fa:34 (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:34 (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:34 (capab=0x431 status=0 aid=10)
wlan0: associated
wlan0: Limiting TX power to 13 dBm as advertised by 50:06:04:e6:fa:34
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=0951, idProduct=1666
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: DataTraveler 3.0
usb 2-1: Manufacturer: Kingston
usb 2-1: SerialNumber: 08606E6D41E2B010583DF831
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 2:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 15138816 512-byte logical blocks: (7.75 GB/7.21 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 00
sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sdb: detected capacity change from 7751073792 to 0
usb 2-1: USB disconnect, device number 2
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x1 status=17 aid=0)
wlan0: 50:06:04:e6:fa:3b denied association (code=17)
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x1 status=17 aid=0)
wlan0: 50:06:04:e6:fa:3b denied association (code=17)
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x1 status=17 aid=0)
wlan0: 50:06:04:e6:fa:3b denied association (code=17)
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x11 status=0 aid=31)
wlan0: associated
wlan0: Limiting TX power to 14 dBm as advertised by 50:06:04:e6:fa:3b
wlan0: authenticate with f4:cf:e2:55:85:14
wlan0: send auth to f4:cf:e2:55:85:14 (try 1/3)
wlan0: authenticated
wlan0: associate with f4:cf:e2:55:85:14 (try 1/3)
wlan0: RX AssocResp from f4:cf:e2:55:85:14 (capab=0x421 status=17 aid=0)
wlan0: f4:cf:e2:55:85:14 denied association (code=17)
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x1 status=17 aid=0)
wlan0: 50:06:04:e6:fa:3b denied association (code=17)
wlan0: authenticate with 50:06:04:e6:fa:34
wlan0: send auth to 50:06:04:e6:fa:34 (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:34 (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:34 (capab=0x421 status=17 aid=0)
wlan0: 50:06:04:e6:fa:34 denied association (code=17)
wlan0: authenticate with f4:cf:e2:1d:09:c4
wlan0: send auth to f4:cf:e2:1d:09:c4 (try 1/3)
wlan0: authenticated
wlan0: associate with f4:cf:e2:1d:09:c4 (try 1/3)
wlan0: RX AssocResp from f4:cf:e2:1d:09:c4 (capab=0x421 status=34 aid=0)
wlan0: f4:cf:e2:1d:09:c4 denied association (code=34)
wlan0: authenticate with f4:cf:e2:55:85:1b
wlan0: direct probe to f4:cf:e2:55:85:1b (try 1/3)
wlan0: direct probe to f4:cf:e2:55:85:1b (try 2/3)
wlan0: direct probe to f4:cf:e2:55:85:1b (try 3/3)
wlan0: authentication with f4:cf:e2:55:85:1b timed out
wlan0: authenticate with 50:06:04:e6:fa:34
wlan0: send auth to 50:06:04:e6:fa:34 (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:34 (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:34 (capab=0x421 status=17 aid=0)
wlan0: 50:06:04:e6:fa:34 denied association (code=17)
wlan0: authenticate with f4:cf:e2:55:85:14
wlan0: send auth to f4:cf:e2:55:85:14 (try 1/3)
wlan0: authenticated
wlan0: associate with f4:cf:e2:55:85:14 (try 1/3)
wlan0: RX AssocResp from f4:cf:e2:55:85:14 (capab=0x421 status=17 aid=0)
wlan0: f4:cf:e2:55:85:14 denied association (code=17)
wlan0: authenticate with 50:06:04:e6:fa:3b
wlan0: send auth to 50:06:04:e6:fa:3b (try 1/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:3b (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:3b (capab=0x1 status=17 aid=0)
wlan0: 50:06:04:e6:fa:3b denied association (code=17)
wlan0: authenticate with f4:cf:e2:1d:09:c4
wlan0: send auth to f4:cf:e2:1d:09:c4 (try 1/3)
wlan0: send auth to f4:cf:e2:1d:09:c4 (try 2/3)
wlan0: authenticated
wlan0: associate with f4:cf:e2:1d:09:c4 (try 1/3)
wlan0: RX AssocResp from f4:cf:e2:1d:09:c4 (capab=0x421 status=34 aid=0)
wlan0: f4:cf:e2:1d:09:c4 denied association (code=34)
wlan0: authenticate with 50:06:04:e6:fa:34
wlan0: send auth to 50:06:04:e6:fa:34 (try 1/3)
wlan0: send auth to 50:06:04:e6:fa:34 (try 2/3)
wlan0: authenticated
wlan0: associate with 50:06:04:e6:fa:34 (try 1/3)
wlan0: RX AssocResp from 50:06:04:e6:fa:34 (capab=0x431 status=0 aid=18)
wlan0: associated
wlan0: Limiting TX power to 13 dBm as advertised by 50:06:04:e6:fa:34
usb 2-1: new SuperSpeed USB device number 3 using xhci_hcd
usb 2-1: New USB device found, idVendor=0951, idProduct=1666
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: DataTraveler 3.0
usb 2-1: Manufacturer: Kingston
usb 2-1: SerialNumber: 08606E6D41E2B010583DF831
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host3: usb-storage 2-1:1.0
scsi 3:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 15138816 512-byte logical blocks: (7.75 GB/7.21 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 45 00 00 00
sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI removable disk
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=4374205 end=4374206)
FAT-fs (sdb1): error, fat_free_clusters: deleting FAT entry beyond EOF
FAT-fs (sdb1): Filesystem has been set read-only
usb 2-1: USB disconnect, device number 3
sd 3:0:0:0: [sdb] FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 3:0:0:0: [sdb] CDB: Write(10) 2a 00 00 8d 32 d8 00 00 01 00
blk_update_request: I/O error, dev sdb, sector 9253592
Buffer I/O error on dev sdb1, logical block 9251544, lost async page write
sd 3:0:0:0: [sdb] FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 3:0:0:0: [sdb] CDB: Write(10) 2a 00 00 00 08 01 00 00 01 00
blk_update_request: I/O error, dev sdb, sector 2049
Buffer I/O error on dev sdb1, logical block 1, lost async page write
------------[ cut here ]------------
WARNING: CPU: 3 PID: 32718 at /home/kernel/COD/linux/fs/block_dev.c:57 __blkdev_put+0x1b6/0x1f0()
Modules linked in: uas usb_storage hid_generic usbhid hid drbg ansi_cprng ctr ccm snd_hrtimer intel_rapl intel_powerclamp coretemp kvm_intel kvm snd_hda_codec_hdmi arc4 snd_hda_codec_realtek snd_hda_codec_generic cmac iwlmvm punit_atom_debug mac80211 snd_hda_intel crct10dif_pclmul snd_hda_codec uvcvideo crc32_pclmul snd_hda_core snd_hwdep snd_pcm ghash_clmulni_intel videobuf2_vmalloc iwlwifi videobuf2_memops videobuf2_core aesni_intel v4l2_common cfg80211 snd_seq_midi videodev rtsx_pci_ms snd_seq_midi_event aes_x86_64 lrw gf128mul memstick glue_helper ablk_helper snd_rawmidi cryptd snd_seq media rfcomm input_leds bnep joydev snd_seq_device serio_raw btusb lpc_ich snd_timer btrtl btbcm snd btintel bluetooth mei_txe soundcore shpchp mei i915 wmi drm_kms_helper processor_thermal_device drm int3400_thermal dwc3 int340x_thermal_zone acpi_thermal_rel udc_core intel_soc_dts_iosf ulpi binfmt_misc i2c_algo_bit video tpm_crb mac_hid iosf_mbi parport_pc ppdev lp parport nls_iso8859_1 rtsx_pci_sdmmc psmouse r8169 ahci mii rtsx_pci libahci
CPU: 3 PID: 32718 Comm: umount Not tainted 4.2.3-040203-generic #201510030832
Hardware name: Notebook W510LU/W510LU, BIOS 5.11 02/19/2016
ffffffff81ac6e68 ffff88003fc2fd98 ffffffff817a2803 0000000000000000
0000000000000000 ffff88003fc2fdd8 ffffffff810771da 0000000000000000
ffff88007a2d5380 ffff88007a2d54f8 ffff88007a2d5470 ffff88007a2d5398
Call Trace:
[] dump_stack+0x45/0x57
[] warn_slowpath_common+0x8a/0xc0
[] warn_slowpath_null+0x1a/0x20
[] __blkdev_put+0x1b6/0x1f0
[] blkdev_put+0x50/0x120
[] kill_block_super+0x44/0x70
[] deactivate_locked_super+0x43/0x70
[] deactivate_super+0x4e/0x70
[] cleanup_mnt+0x43/0x90
[] __cleanup_mnt+0x12/0x20
[] task_work_run+0x85/0xb0
[] do_notify_resume+0x58/0x80
[] int_signal+0x12/0x17
---[ end trace d215ad35c02299b0 ]---
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request
usb 1-2: USB disconnect, device number 4
[drm:valleyview_update_wm [i915]] *ERROR* timed out waiting for Punit DDR DVFS request