dmesg - IGORMP-480
Linux version 4.9.8-1-ARCH (builduser@tobias) (gcc version 6.3.1 20170109 (GCC) ) #1 SMP PREEMPT Mon Feb 6 12:59:40 CET 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000086000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x000000000009efff] ACPI NVS
BIOS-e820: [mem 0x0000000000100000-0x00000000bf8bafff] usable
BIOS-e820: [mem 0x00000000bf8bb000-0x00000000bfabefff] reserved
BIOS-e820: [mem 0x00000000bfabf000-0x00000000bfbbefff] ACPI NVS
BIOS-e820: [mem 0x00000000bfbbf000-0x00000000bfc3efff] ACPI data
BIOS-e820: [mem 0x00000000bfc3f000-0x00000000bfca3fff] usable
BIOS-e820: [mem 0x00000000bfcd4000-0x00000000bfceffff] usable
BIOS-e820: [mem 0x00000000bfdf0000-0x00000000bfdf2fff] ACPI NVS
BIOS-e820: [mem 0x00000000bfdf3000-0x00000000bfdfffff] ACPI data
BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.10 by TianoCore.org
efi: ACPI 2.0=0xbfbbe000 ACPI=0xbfbbd000 SMBIOS=0xbfbbc000 MPS=0xbfbbb000
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-78LMT-S2/GA-78LMT-S2, BIOS F5 10/19/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BFE00000 mask FFFFFFE00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000240000000 aka 9216M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xbfe00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbfcf0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5d10-0x000f5d1f] mapped at [ffff8800000f5d10]
Base memory trampoline at [ffff880000094000] 94000 size 24576
Using GB pages for direct mapping
BRK [0x01d57000, 0x01d57fff] PGTABLE
BRK [0x01d58000, 0x01d58fff] PGTABLE
BRK [0x01d59000, 0x01d59fff] PGTABLE
BRK [0x01d5a000, 0x01d5afff] PGTABLE
RAMDISK: [mem 0x7f547000-0x7fffffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BFBBE000 000014 (v00 GBT )
ACPI: RSDT 0x00000000BFDF3000 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000BFDF3080 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000BFDF3100 0064C0 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 0x00000000BFDF0000 000040
ACPI: MSDM 0x00000000BFDF9680 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 0x00000000BFDF9700 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000BFDF9740 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: TAMG 0x00000000BFDF9780 000022 (v01 GBT GBT B0 5455312E BG?? 00000101)
ACPI: APIC 0x00000000BFDF95C0 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 0x00000000BFDF9820 001158 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
NODE_DATA(0) allocated [mem 0x23fff9000-0x23fffdfff]
Zone ranges:
DMA [mem 0x0000000000086000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000086000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000bf8bafff]
node 0: [mem 0x00000000bfc3f000-0x00000000bfca3fff]
node 0: [mem 0x00000000bfcd4000-0x00000000bfceffff]
node 0: [mem 0x0000000100000000-0x000000023fffffff]
Initmem setup node 0 [mem 0x0000000000086000-0x000000023fffffff]
On node 0 totalpages: 2095187
DMA zone: 62 pages used for memmap
DMA zone: 9 pages reserved
DMA zone: 3863 pages, LIFO batch:0
DMA32 zone: 12197 pages used for memmap
DMA32 zone: 780604 pages, LIFO batch:31
Normal zone: 20480 pages used for memmap
Normal zone: 1310720 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00085fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf8bb000-0xbfabefff]
PM: Registered nosave memory: [mem 0xbfabf000-0xbfbbefff]
PM: Registered nosave memory: [mem 0xbfbbf000-0xbfc3efff]
PM: Registered nosave memory: [mem 0xbfca4000-0xbfcd3fff]
PM: Registered nosave memory: [mem 0xbfcf0000-0xbfdeffff]
PM: Registered nosave memory: [mem 0xbfdf0000-0xbfdf2fff]
PM: Registered nosave memory: [mem 0xbfdf3000-0xbfdfffff]
PM: Registered nosave memory: [mem 0xbfe00000-0xbfefffff]
PM: Registered nosave memory: [mem 0xbff00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xbff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff88023fc00000 s103512 r8192 d31656 u262144
pcpu-alloc: s103512 r8192 d31656 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2062439
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x17cc000000-0x17cdffffff] (32MB)
Aperture beyond 4GB. Ignoring.
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
Memory: 8072616K/8380748K available (6205K kernel code, 1071K rwdata, 1944K rodata, 1280K init, 1032K bss, 308132K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:488 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3515.557 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7033.07 BogoMIPS (lpj=11718523)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160831
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff81c4d000 - ffffffff81c53000)
ftrace: allocating 24616 entries in 97 pages
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-6300 Six-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5
x86: Booted up 1 node, 6 CPUs
smpboot: Total of 6 processors activated (42202.20 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0009d000-0x0009efff] (8192 bytes)
PM: Registering ACPI NVS region [mem 0xbfabf000-0xbfbbefff] (1048576 bytes)
PM: Registering ACPI NVS region [mem 0xbfdf0000-0xbfdf2fff] (12288 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 21:21:38, date: 02/14/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xff00-0xff07]
pci 0000:00:11.0: reg 0x14: [io 0xfe00-0xfe03]
pci 0000:00:11.0: reg 0x18: [io 0xfd00-0xfd07]
pci 0000:00:11.0: reg 0x1c: [io 0xfc00-0xfc03]
pci 0000:00:11.0: reg 0x20: [io 0xfb00-0xfb0f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:12.1: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xfa00-0xfa0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1002:67df] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xdfe00000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xee00-0xeeff]
pci 0000:01:00.0: reg 0x24: [mem 0xfdf80000-0xfdfbffff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfdffc000-0xfdffffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xde00-0xdeff]
pci 0000:02:00.0: reg 0x18: [mem 0xfdbff000-0xfdbfffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xfdbf8000-0xfdbfbfff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:06.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf8bb000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfca4000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfcf0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0x0840-0x0847] has been reserved
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0220-0x0225] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:01: [io 0x4100-0x411f] has been reserved
system 00:01: [io 0x0228-0x022f] has been reserved
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c52] has been reserved
system 00:01: [io 0x0c6c-0x0c6d] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cdf] has been reserved
system 00:01: [io 0x4000-0x40fe] has been reserved
system 00:01: [io 0x4210-0x4217] has been reserved
system 00:01: [io 0x0b00-0x0b0f] has been reserved
system 00:01: [io 0x0b10-0x0b1f] has been reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000d4400-0x000d7fff] has been reserved
system 00:05: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:05: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:05: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:05: [mem 0xbfdf0000-0xbfdfffff] could not be reserved
system 00:05: [mem 0xffff0000-0xffffffff] has been reserved
system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:05: [mem 0x00100000-0xbfdeffff] could not be reserved
system 00:05: [mem 0xbfe00000-0xbfefffff] has been reserved
system 00:05: [mem 0xbff00000-0xbfffffff] could not be reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:05: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:06.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 10980K (ffff88007f547000 - ffff880080000000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, using 1952k, total 1950k
efifb: mode is 800x600x32, linelength=3328, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0: patch_level=0x0600081c
microcode: CPU1: patch_level=0x0600081c
microcode: CPU2: patch_level=0x0600081c
microcode: CPU3: patch_level=0x0600081c
microcode: CPU4: patch_level=0x0600081c
microcode: CPU5: patch_level=0x0600081c
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 5:79:399
rtc_cmos 00:02: setting system clock to 2017-02-14 21:21:38 UTC (1487107298)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1280K (ffffffff81b0d000 - ffffffff81c4d000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1972K (ffff880001613000 - ffff880001800000)
Freeing unused kernel memory: 104K (ffff8800019e6000 - ffff880001a00000)
random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
[drm] Initialized
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
[drm] amdgpu kernel modesetting enabled.
checking generic (c0000000 1e8000) vs hw (c0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x174B:0xE347 0xC7).
[drm] register mmio base: 0xFDF80000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xDFE00000
[drm] doorbell mmio size: 2097152
[drm] probing gen 2 caps for device 1022:9603 = 300d02/0
[drm] probing mlw for device 1022:9603 = 300d02
[drm] UVD is enabled in VM mode
[drm] VCE enabled in VM mode
amdgpu 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: E347
[drm] GPU post is not needed
[TTM] Zone kernel: Available graphics memory: 4086292 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
amdgpu 0000:01:00.0: VRAM: 8192M 0x0000000000000000 - 0x00000001FFFFFFFF (8192M used)
amdgpu 0000:01:00.0: GTT: 3990M 0x0000000200000000 - 0x00000002F9684FFF
[drm] Detected VRAM RAM=8192M, BAR=256M
[drm] RAM width 256bits GDDR5
[drm] amdgpu: 8192M of VRAM memory ready
[drm] amdgpu: 3990M of GTT memory ready.
[drm] GART: num cpu pages 1021573, num gpu pages 1021573
[drm] PCIE GART of 3990M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: powerplay initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD6
[drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD4
[drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] HDMI-A-2
[drm] HPD5
[drm] DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4877
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY1
[drm] Connector 4:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f
[drm] Encoders:
[drm] DFP5: INTERNAL_UNIPHY
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000200000008, cpu addr 0xffff88023318a008
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000200000018, cpu addr 0xffff88023318a018
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000200000028, cpu addr 0xffff88023318a028
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000200000038, cpu addr 0xffff88023318a038
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000200000048, cpu addr 0xffff88023318a048
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000200000058, cpu addr 0xffff88023318a058
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000200000068, cpu addr 0xffff88023318a068
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000200000078, cpu addr 0xffff88023318a078
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000200000088, cpu addr 0xffff88023318a088
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x0000000200000098, cpu addr 0xffff88023318a098
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000002000000a8, cpu addr 0xffff88023318a0a8
[drm] Found UVD firmware Version: 1.79 Family ID: 16
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x0000000000868420, cpu addr 0xffffc9000205a420
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x00000002000000c8, cpu addr 0xffff88023318a0c8
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000002000000d8, cpu addr 0xffff88023318a0d8
[AVFS] Something is broken. See log!
[drm] ring test on 0 succeeded in 10 usecs
[drm] ring test on 1 succeeded in 27 usecs
[drm] ring test on 2 succeeded in 17 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] ring test on 8 succeeded in 2 usecs
[drm] ring test on 9 succeeded in 6 usecs
[drm] ring test on 10 succeeded in 5 usecs
[drm] ring test on 11 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ring test on 12 succeeded in 9 usecs
[drm] ring test on 13 succeeded in 5 usecs
[drm] VCE initialized successfully.
[drm] fb mappable at 0xC0A72000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] Initialized amdgpu 3.8.0 20150101 for 0000:01:00.0 on minor 0
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 3.00 loaded.
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci-pci: EHCI PCI platform driver
scsi host0: pata_atiixp
scsi host1: pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
tsc: Refined TSC clocksource calibration: 3515.549 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32acb1d1385, max_idle_ns: 440795349851 ns
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-9: SanDisk SDSSDP128G, 3.2.0, max UDMA/133
ata3.00: 246162672 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SanDisk SDSSDP12 0 PQ: 0 ANSI: 5
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi host8: usb-storage 2-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 3:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5
usb 3-1: new low-speed USB device number 2 using ohci-pci
sd 2:0:0:0: [sda] 246162672 512-byte logical blocks: (126 GB/117 GiB)
sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sdb] 4096-byte physical blocks
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb2 sdb3 sdb4
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 6-2: new full-speed USB device number 2 using ohci-pci
usb 3-2: new full-speed USB device number 3 using ohci-pci
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:045E:07F8.0001/input/input1
hid-generic 0003:045E:07F8.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:12.0-1/input0
input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/0003:045E:07F8.0002/input/input2
hid-generic 0003:045E:07F8.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:12.0-1/input1
hid-generic 0003:1038:1369.0003: hiddev0,hidraw2: USB HID v1.11 Device [SteelSeries Sensei Raw Gaming Mouse] on usb-0000:00:13.1-2/input0
input: SteelSeries Sensei Raw Gaming Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:1038:1369.0004/input/input3
hid-generic 0003:1038:1369.0004: input,hidraw3: USB HID v1.11 Mouse [SteelSeries Sensei Raw Gaming Mouse] on usb-0000:00:13.1-2/input1
input: SteelSeries Sensei Raw Gaming Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.2/0003:1038:1369.0005/input/input4
hid-generic 0003:1038:1369.0005: input,hidraw4: USB HID v1.11 Keyboard [SteelSeries Sensei Raw Gaming Mouse] on usb-0000:00:13.1-2/input2
input: SteelSeries Sensei Raw Gaming Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.3/0003:1038:1369.0006/input/input5
clocksource: Switched to clocksource tsc
hid-generic 0003:1038:1369.0006: input,hidraw5: USB HID v1.11 Device [SteelSeries Sensei Raw Gaming Mouse] on usb-0000:00:13.1-2/input3
scsi 8:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 8:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 8:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
scsi 8:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 8:0:0:3: [sdf] Attached SCSI removable disk
random: fast init done
sd 8:0:0:0: [sdc] Attached SCSI removable disk
sd 8:0:0:1: [sdd] Attached SCSI removable disk
sd 8:0:0:2: [sde] Attached SCSI removable disk
floppy0: no floppy controllers found
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
acpi_call: loading out-of-tree module taints kernel.
EXT4-fs (sda2): re-mounted. Opts: discard,data=ordered
Adding 12582908k swap on /swapfile. Priority:-1 extents:13 across:14802940k SSFS
systemd-journald[248]: Received request to flush runtime journal from PID 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
wmi: Mapper loaded
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
acpi_cpufreq: overriding BIOS provided _PSD data
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000d71000, 94:de:80:f1:55:30, XID 0c900800 IRQ 27
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20160831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x3c
sp5100_tco: failed to find MMIO address, giving up.
input: PC Speaker as /devices/platform/pcspkr/input/input8
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input9
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver xpad
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
snd_hda_codec_realtek hdaudioC0D0: CD=0x1c
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
r8169 0000:02:00.0 enp2s0: renamed from eth0
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
random: crng init done
EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: data=ordered
microcode: CPU0: new patch_level=0x0600084f
microcode: CPU1: new patch_level=0x0600084f
microcode: CPU3: new patch_level=0x0600084f
it87: Found IT8728F chip at 0x228, revision 1
it87: Beeping is supported
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
floppy0: no floppy controllers found
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
fuse init (API version 7.26)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
serial 00:03: disabled
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
sd 3:0:0:0: [sdb] Stopping disk
PM: suspend of devices complete after 1541.449 msecs
PM: late suspend of devices complete after 1.126 msecs
ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
ohci-pci 0000:00:13.1: System wakeup enabled by ACPI
ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
ohci-pci 0000:00:12.1: System wakeup enabled by ACPI
ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.622 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
PCI-DMA: Resuming GART IOMMU
PCI-DMA: Restoring GART aperture settings
LVT offset 0 assigned for vector 0x400
Suspended for 8148.030 seconds
microcode: CPU0: new patch_level=0x0600084f
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
microcode: CPU2: new patch_level=0x0600084f
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x4
cache: parent cpu4 should not be sleeping
microcode: CPU4: new patch_level=0x0600084f
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x5
cache: parent cpu5 should not be sleeping
CPU5 is up
ACPI: Waking up from system sleep state S3
ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
ohci-pci 0000:00:12.1: System wakeup disabled by ACPI
ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
ohci-pci 0000:00:13.1: System wakeup disabled by ACPI
ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 15.321 msecs
PM: early resume of devices complete after 0.502 msecs
rtc_cmos 00:02: System wakeup disabled by ACPI
serial 00:03: activated
sd 2:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
usb usb7: root hub lost power or was reset
usb usb4: root hub lost power or was reset
usb usb3: root hub lost power or was reset
usb usb5: root hub lost power or was reset
usb usb6: root hub lost power or was reset
[drm] PCIE GART of 3990M enabled (table at 0x0000000000040000).
[drm] ring test on 0 succeeded in 12 usecs
[drm] ring test on 1 succeeded in 27 usecs
[drm] ring test on 2 succeeded in 16 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 3 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] ring test on 8 succeeded in 2 usecs
[drm] ring test on 9 succeeded in 6 usecs
[drm] ring test on 10 succeeded in 6 usecs
[drm] ring test on 11 succeeded in 1 usecs
[drm] UVD initialized successfully.
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
[drm] ring test on 12 succeeded in 24611 usecs
[drm] ring test on 13 succeeded in 5 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
usb 3-2: reset full-speed USB device number 3 using ohci-pci
usb 6-2: reset full-speed USB device number 2 using ohci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
usb 3-1: reset low-speed USB device number 2 using ohci-pci
PM: resume of devices complete after 1198.809 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
failed to send message 5e ret is 0
failed to send message 145 ret is 0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready